Simple Machines Alıştırma Soruları — Armed Services Vocational Aptitude Battery (ASVAB) — Sayfa 6

Match the following types of gear components to their primary mechanical function within a transmission system.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Rack and pinion maps to converting rotational to linear motion. Worm gear maps to providing drastic speed reduction and preventing back-driving. Bevel gear maps to changing the axis of rotation by 90 degrees. Idler gear maps to reversing rotational direction without changing the final output speed ratio.

Each gear type serves a distinct mechanical purpose: rack and pinions handle linear conversion, worm gears manage high reduction and locking, bevel gears handle angular power transmission, and idlers handle direction reversal without ratio changes.

Adım Adım Çözüm

1

Identify the unique function of a rack and pinion system.

Matches with converting rotational motion into linear motion.

The circular pinion rolls along the flat rack, pushing it in a straight line, which is unique among these options.

2

Identify the primary characteristic of a worm gear drive.

Matches with providing drastic speed reduction and preventing back-driving.

The screw-like thread of the worm advances the gear by one tooth per revolution, giving high reduction, and friction usually prevents reverse operation.

3

Identify the application of a bevel gear set.

Matches with changing the axis of rotation by 90 degrees between intersecting shafts.

The conical shape of bevel gears allows them to mesh at an angle, most commonly 90 degrees, allowing perpendicular power transmission.

4

Identify the purpose of an idler gear.

Matches with reversing the rotational direction without changing the final output speed ratio.

An intermediate gear only changes the spin direction of the subsequent gear; its tooth count cancels out in the overall ratio calculation.

Anahtar Kavram

Functions of specialized gear types in power transmission

Soru 102Soru →

A conveyor system uses a compound gear train to reduce motor speed. The driving motor turns Gear A (20 teeth) clockwise at $240\text{ rpm}$ . Gear A meshes with Gear B (60 teeth). Gear B shares a solid axle with Gear C (10 teeth), meaning they rotate together. Gear C meshes with Gear D (40 teeth), which drives the conveyor belt. What is the rotational speed and direction of Gear D?

20\text{ rpm}

, clockwise

20\text{ rpm}

, counter-clockwise

120\text{ rpm}

, counter-clockwise

2880\text{ rpm}

, clockwise

Cevabı ve açıklamayı göster

Cevap: $20\text{ rpm}$ , clockwise

Cevap

Gear D rotates at

20\text{ rpm}

, clockwise.

In a compound gear system, the total speed reduction is the product of the individual gear pair ratios. The first pair reduces the speed from

240\text{ rpm}

to

80\text{ rpm}

and reverses direction to counter-clockwise. The second pair reduces the

80\text{ rpm}

speed to

20\text{ rpm}

and reverses direction back to clockwise.

Adım Adım Çözüm

1

Calculate the speed and direction of Gear B.

Gear B rotates at

80\text{ rpm}

counter-clockwise.

Gear B has three times as many teeth as Gear A (60 vs 20), so it spins at one-third the speed (

240 / 3 = 80

). Meshing gears turn in opposite directions.

2

Determine the speed and direction of Gear C.

Gear C rotates at

80\text{ rpm}

counter-clockwise.

Gears mounted on the same solid axle rotate at the exact same speed and in the same direction.

3

Calculate the speed and direction of Gear D.

Gear D rotates at

20\text{ rpm}

clockwise.

Gear D has four times as many teeth as Gear C (40 vs 10), so it spins at one-quarter the speed of Gear C (

80 / 4 = 20

). Meshing gears turn in opposite directions.

Anahtar Kavram

Compound Gear Trains and Speed Reduction

Soru 103Soru →

A hand-cranked emergency power generator uses a two-stage compound gear train to increase the rotational speed of its rotor. The hand crank is connected directly to the driving gear, Gear A, which has $60$ teeth. Gear A meshes with Gear B, which has $15$ teeth. Gear B shares a solid intermediate shaft with Gear C, which has $40$ teeth. Finally, Gear C meshes with Gear D on the generator's rotor shaft, which has $10$ teeth.

If a user turns the hand crank at a steady rate of $30\text{ rpm}$ , what is the resulting rotational speed of the generator rotor in $\text{rpm}$ ?

Cevabı ve açıklamayı göster

Cevap: 480

Cevap

480

The correct answer is 480 because the total speed multiplication of a compound gear train is the product of the individual gear ratios of each stage. Stage 1 has a ratio of 60:15 (a 4:1 multiplier). Stage 2 has a ratio of 40:10 (a 4:1 multiplier). The total multiplier is 4 * 4 = 16. The input speed of 30 rpm multiplied by 16 gives a final output speed of 480 rpm.

Adım Adım Çözüm

1

Calculate the speed multiplication factor of the first gear pair.

Factor of 4

Gear A (60 teeth) drives Gear B (15 teeth). The ratio of teeth is 60/15 = 4. Because a larger gear is driving a smaller gear, the rotational speed increases by this factor.

2

Calculate the rotational speed of the intermediate shaft.

120 rpm

Multiply the input speed (30 rpm) by the first stage factor (4). 30 * 4 = 120 rpm. Both Gear B and Gear C spin at this exact rate since they are mounted on the same solid shaft.

3

Calculate the speed multiplication factor of the second gear pair.

Factor of 4

Gear C (40 teeth) drives Gear D (10 teeth). The ratio is 40/10 = 4. Again, a larger gear is driving a smaller one, increasing the speed.

4

Calculate the final rotational speed of the rotor.

480 rpm

Multiply the intermediate shaft speed (120 rpm) by the second stage factor (4). 120 * 4 = 480 rpm.

Anahtar Kavram

Calculating output speed in a compound gear train

Soru 104Soru →

A carpenter uses a claw hammer to pull a stubborn nail out of a board. The point where the hammer head rests on the board acts as the fulcrum. The distance from the fulcrum to the nail is $1.5\text{ inches}$ , and the carpenter grips the handle $15\text{ inches}$ away from the fulcrum. If the carpenter applies a $25\text{-lb}$ pull at the handle, what is the maximum nail resistance that can be overcome, and what class of lever is being used?

275\text{ lbs}

; second-class lever

250\text{ lbs}

; second-class lever

250\text{ lbs}

; first-class lever

2.5\text{ lbs}

; third-class lever

Cevabı ve açıklamayı göster

Cevap: $250\text{ lbs}$ ; first-class lever

Cevap

The maximum resistance is

250\text{ lbs}

, and the system acts as a first-class lever.

The correct answer accurately identifies the claw hammer as a first-class lever because the fulcrum is located between the applied effort and the load. Applying the principle of moments (torque balance), the effort force multiplied by the effort arm (

25 \times 15 = 375

) must equal the load force multiplied by the load arm. Dividing

375

by

1.5

yields a maximum resistance of

250\text{ lbs}

.

Adım Adım Çözüm

1

Determine the relative positions of the fulcrum, effort, and load to identify the lever class.

The fulcrum (where the hammer rests on the board) is located between the effort (the hand pulling the handle) and the load (the nail). This arrangement defines a first-class lever.

Knowing the correct lever class confirms how the forces interact around the pivot point.

2

Set up the torque balance equation using the principle of moments.

\text{Effort Force} \times \text{Effort Arm} = \text{Load Force} \times \text{Load Arm}

For the lever to overcome the nail's resistance, the torque applied by the carpenter must at least equal the opposing torque of the nail.

3

Substitute the given values into the equation and solve for the load force.

25 \times 15 = \text{Load Force} \times 1.5 \rightarrow 375 = \text{Load Force} \times 1.5 \rightarrow \text{Load Force} = 375 / 1.5 = 250\text{ lbs}

.

This calculation yields the maximum resistance force the lever can lift under the applied effort.

Anahtar Kavram

Torque balance and lever classification

Soru 105Soru →

A commercial dough mixer utilizes a three-gear sequence to rotate its mixing hook. The main motor turns the first gear (24 teeth) clockwise at $240\text{ rpm}$ . This gear meshes directly with a smaller intermediate gear (12 teeth), which subsequently drives the final hook gear (72 teeth). What is the resulting rotational speed and direction of the final hook gear?

720\text{ rpm}

, clockwise

80\text{ rpm}

, counter-clockwise

80\text{ rpm}

, clockwise

720\text{ rpm}

, counter-clockwise

Cevabı ve açıklamayı göster

Cevap: $80\text{ rpm}$ , clockwise

Cevap

The final hook gear rotates at

80\text{ rpm}

in a clockwise direction.

The intermediate gear acts as an idler. Therefore, the overall speed ratio depends only on the first (24 teeth) and final (72 teeth) gears. The driven gear is three times larger than the driving gear, so it will rotate at one-third the speed:

240 / 3 = 80\text{ rpm}

. Regarding direction, meshing gears rotate in opposite directions. The first gear is clockwise, the second is counter-clockwise, and the third is clockwise.

Adım Adım Çözüm

1

Determine the effect of the intermediate gear on the final speed.

The intermediate gear acts as an idler gear.

An idler gear placed between a driving and driven gear changes the direction of rotation but does not affect the final speed ratio.

2

Calculate the final rotational speed.

Final speed is

80\text{ rpm}

.

The speed is calculated using the ratio of the first and last gears:

\text{Speed} = 240 \times \frac{24}{72} = 240 \times \frac{1}{3} = 80\text{ rpm}

.

3

Determine the final direction of rotation.

The final gear rotates clockwise.

Gear 1 is clockwise, so Gear 2 is counter-clockwise, meaning Gear 3 is clockwise.

Anahtar Kavram

Idler Gears and Gear Ratios

Soru 106Soru →

Match each lever classification or concept to its correct structural arrangement or definition.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

First-Class Lever matches with fulcrum in the middle; Second-Class Lever matches with load in the middle; Third-Class Lever matches with effort in the middle; Mechanical Advantage matches with the force multiplier ratio.

Lever classes are universally categorized by which component (Fulcrum, Load, or Effort) is located in the middle of the structural arrangement. Matching these central components correctly defines the machine.

Adım Adım Çözüm

1

Identify the arrangement for a first-class lever.

Matches with the fulcrum positioned between the effort and the load.

This is the fundamental definition of a first-class lever system, like a standard seesaw.

2

Identify the arrangement for a second-class lever.

Matches with the load positioned between the fulcrum and the effort.

This represents systems designed to multiply force by keeping the load closer to the pivot point, like a nutcracker.

3

Identify the arrangement for a third-class lever.

Matches with the applied effort positioned between the fulcrum and the load.

This represents systems designed to increase range of motion, like a broom or tweezers.

4

Define mechanical advantage in the context of simple machines.

Matches with the factor by which a machine multiplies the input force.

Mechanical advantage is the primary metric for evaluating how much a lever amplifies the applied force.

Anahtar Kavram

Lever Classification and Mechanical Advantage

Soru 107Soru →

A carpenter uses a claw hammer to pull a stubborn nail out of a wooden plank. The hammer head rests on the plank, creating a pivot point (fulcrum) that is exactly $2\text{ inches}$ away from the nail. The carpenter applies a perpendicular pulling force of $40\text{ lbs}$ on the hammer's handle, at a distance of $12\text{ inches}$ away from the pivot point. Assuming the hammer acts as a simple first-class lever, how much upward force is exerted on the nail?

80\text{ lbs}

200\text{ lbs}

240\text{ lbs}

480\text{ lbs}

Cevabı ve açıklamayı göster

Cevap: $240\text{ lbs}$

Cevap

The upward force exerted on the nail is

240\text{ lbs}

.

The claw hammer acts as a first-class lever where torque is balanced around the fulcrum. The formula for a balanced lever is

\text{Effort} \times \text{Effort Arm} = \text{Load} \times \text{Load Arm}

. Plugging in the given values yields

40 \times 12 = \text{Load} \times 2

, which simplifies to

480 = 2 \times \text{Load}

. Dividing both sides by 2 gives a load force of

240\text{ lbs}

.

Adım Adım Çözüm

1

Identify the lever arms for the hammer setup.

The effort arm (distance from the pulling hand to the fulcrum) is

12\text{ inches}

. The load arm (distance from the nail to the fulcrum) is

2\text{ inches}

.

Correctly identifying the distances from the fulcrum is necessary for calculating mechanical advantage and balancing torque.

2

Calculate the mechanical advantage (MA) of the lever.

\text{MA} = \text{Effort Arm} / \text{Load Arm} = 12 / 2 = 6

.

The mechanical advantage indicates how many times the lever multiplies the input force.

3

Calculate the total upward force exerted on the nail.

\text{Force on nail} = \text{Effort force} \times \text{MA} = 40 \times 6 = 240\text{ lbs}

.

The output load force is the product of the input effort and the mechanical advantage.

Anahtar Kavram

Mechanical Advantage and Torque Balance in First-Class Levers

Soru 108Soru →

Identify the lever classification and mechanical advantage principles for the following common tools. Match each real-world application to its correct mechanical description.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The pry bar is a Class 1 lever, the paper cutter is a Class 2 lever, and the tweezers are a Class 3 lever.

By analyzing the geometry of each tool, we find that the pry bar places the fulcrum between the applied force and the resistance (Class 1). The paper cutter places the resistance between the fulcrum and the applied force (Class 2). Finally, the tweezers place the applied force between the fulcrum and the resistance (Class 3).

Adım Adım Çözüm

1

Identify the three main components of a lever for each tool.

Pry bar: Fulcrum is the block. Paper cutter: Load is the paper. Tweezers: Effort is applied at the middle.

The relative physical position of the fulcrum (pivot), effort (input force), and load (output force or resistance) determines the lever class.

2

Determine the lever class based on the component located in the middle.

Pry bar: Fulcrum is in the middle (Class 1). Paper cutter: Load is in the middle (Class 2). Tweezers: Effort is in the middle (Class 3).

Applying standard mechanical classification definitions (using the FLE mnemonic: Fulcrum in middle = Class 1, Load in middle = Class 2, Effort in middle = Class 3).

3

Evaluate the mechanical advantage (MA) characteristics for each class.

Class 1 MA can vary. Class 2 always has MA > 1 (multiplies force). Class 3 always has MA < 1 (multiplies distance).

MA is defined as the ratio of the effort arm length to the load arm length.

Anahtar Kavram

Lever Classification and Mechanical Advantage

Soru 109Soru →

A technician is testing a mechanical linkage that uses a straight lever pinned at one end, which serves as the fulcrum. A control rod is attached to the lever at a distance of $4\text{ inches}$ from the fulcrum and creates a resistance of $150\text{ lbs}$ . An actuator applies an effort force at the free end of the lever, located $12\text{ inches}$ from the fulcrum. If all forces are applied perpendicular to the lever, what effort force (in pounds) is required to perfectly balance the control rod's resistance?

Cevabı ve açıklamayı göster

Cevap: 50

Cevap

50

In a balanced lever system, the torque produced by the effort force must equal the torque produced by the resistance force. Torque is calculated by multiplying the force by its distance from the fulcrum. Therefore,

F_E \times 12 = 150 \times 4

, which simplifies to

12F_E = 600

, resulting in an effort force of

50\text{ lbs}

.

Adım Adım Çözüm

1

Identify the known variables and their distances from the fulcrum.

Resistance Force (

F_R

) =

150\text{ lbs}

, Resistance Arm (

d_R

) =

4\text{ inches}

, Effort Arm (

d_E

) =

12\text{ inches}

.

Correctly measuring distances from the pivot point (fulcrum) is necessary to calculate torque.

2

Set up the torque balance equation for the lever.

F_E \times d_E = F_R \times d_R

For the lever system to be in equilibrium, the opposing torques must be equal.

3

Substitute the values and calculate the required effort force.

F_E \times 12 = 150 \times 4 \Rightarrow 12F_E = 600 \Rightarrow F_E = 50\text{ lbs}

.

Solving the algebraic equation provides the necessary balancing force.

Anahtar Kavram

Torque balance and lever mechanical advantage

Alternatif Yöntem

Calculate the mechanical advantage (MA) first. MA = Effort Arm

\div

Resistance Arm =

12 \div 4 = 3

. Since the lever provides a mechanical advantage of

3

, the required effort force is exactly one-third of the resistance force (

150 \div 3 = 50\text{ lbs}

).

Tahmini Süre:1m 0s

Soru 110Soru →

Match each simple gear train configuration to its resulting output rotation speed and direction. Assume the driving gear in each configuration rotates clockwise at $120\text{ rpm}$ .

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The correct matches are: the 20-to-60 tooth train outputs

40\text{ rpm}

counter-clockwise; the train with one idler outputs

240\text{ rpm}

clockwise; the 60-to-20 tooth train outputs

360\text{ rpm}

counter-clockwise; and the train with two idlers outputs

120\text{ rpm}

counter-clockwise.

The output speed of a simple gear train is calculated by dividing the number of teeth on the driving gear by the number of teeth on the driven gear, and multiplying that ratio by the input speed. Any intermediate gears, known as idlers, exist solely to bridge gaps or change the rotational direction of the driven gear; their tooth counts do not influence the final output speed. Additionally, each physical mesh between gears reverses the direction of rotation.

Adım Adım Çözüm

1

Evaluate the 20-tooth to 60-tooth gear train.

Matches with '

40\text{ rpm}

, counter-clockwise'.

The output ratio is determined by driver/driven: 20/60 = 1/3. Output speed is

120 \times 1/3 = 40\text{ rpm}

. A single mesh reverses the initial clockwise direction to counter-clockwise.

2

Evaluate the 40-tooth to 20-tooth train with one idler.

Matches with '

240\text{ rpm}

, clockwise'.

The idler's tooth count does not affect the ratio. Ratio is 40/20 = 2. Output speed is

120 \times 2 = 240\text{ rpm}

. Two meshes mean the direction is reversed twice, resulting in clockwise rotation.

3

Evaluate the 60-tooth to 20-tooth gear train.

Matches with '

360\text{ rpm}

, counter-clockwise'.

The output ratio is 60/20 = 3. Output speed is

120 \times 3 = 360\text{ rpm}

. A single mesh reverses the direction to counter-clockwise.

4

Evaluate the 10-tooth to 10-tooth train with two idlers.

Matches with '

120\text{ rpm}

, counter-clockwise'.

The idlers are ignored for speed. Ratio is 10/10 = 1. Output speed is

120 \times 1 = 120\text{ rpm}

. Three meshes alternate the direction (CW to CCW to CW to CCW).

Anahtar Kavram

Calculating output speed and tracking rotational direction in simple gear trains involving idler gears.

Soru 111Soru →

An automotive technician is inspecting a suspended brake pedal assembly in a vehicle. The pedal pivots on a stationary pin located at the very top. The master cylinder pushrod (which provides the load resistance) is connected to the pedal $3\text{ inches}$ directly below the pivot pin. The center of the driver's foot pad (where the effort force is applied) is located $15\text{ inches}$ directly below the pivot pin. If a driver applies exactly $60\text{ lbs}$ of horizontal force to the foot pad, what is the resulting horizontal force applied to the pushrod, and what class of lever does this assembly represent?

300\text{ lbs}

; Second-class lever

300\text{ lbs}

; Third-class lever

240\text{ lbs}

; First-class lever

12\text{ lbs}

; Third-class lever

Cevabı ve açıklamayı göster

Cevap: $300\text{ lbs}$ ; Second-class lever

Cevap

The assembly represents a second-class lever, and the resulting force is

300\text{ lbs}

.

The brake pedal assembly features a fulcrum at the top pin, the load connection in the middle, and the effort application at the bottom. The Fulcrum-Load-Effort (F-L-E) arrangement defines a second-class lever. To find the output force, we use the law of levers (Torque = Force × Distance from fulcrum). The input torque is

60\text{ lbs} \times 15\text{ inches} = 900\text{ in-lbs}

. To maintain equilibrium, the output torque must also be

900\text{ in-lbs}

. Dividing this by the load distance of

3\text{ inches}

yields an output force of

300\text{ lbs}

.

Adım Adım Çözüm

1

Identify the arrangement of the fulcrum, load, and effort to determine the lever class.

The pivot (fulcrum) is at one end, the pushrod (load) is in the middle, and the foot pad (effort) is at the other end. This F-L-E configuration is a second-class lever.

Correctly classifying the lever establishes the proper distances for the torque equation.

2

Set up the torque balance equation for the lever:

F_{effort} \times d_{effort} = F_{load} \times d_{load}

.

60\text{ lbs} \times 15\text{ inches} = F_{load} \times 3\text{ inches}

.

In equilibrium, the torque input from the effort must equal the torque output against the load.

3

Solve the algebraic equation for the unknown load force (

F_{load}

).

900 = 3 \times F_{load}

, which simplifies to

F_{load} = 300\text{ lbs}

.

Isolating the variable gives the exact force applied to the master cylinder pushrod.

Anahtar Kavram

Torque Balance and Lever Classification

Soru 112Soru →

A heavy-duty drawbridge mechanism employs a compound gear train to safely operate its primary lifting drum. The driving electric motor is directly connected to Gear W (14 teeth), which rotates at $640\text{ rpm}$ in a counter-clockwise direction. Gear W meshes with Gear X (56 teeth). Gear X and Gear Y (18 teeth) are rigidly mounted to the same central axle. Gear Y meshes with the final output Gear Z (90 teeth), which turns the lifting drum. Based on this configuration, what is the rotational speed and direction of Gear Z?

32\text{ rpm}

, counter-clockwise

512\text{ rpm}

, counter-clockwise

32\text{ rpm}

, clockwise

800\text{ rpm}

, counter-clockwise

Cevabı ve açıklamayı göster

Cevap: $32\text{ rpm}$ , counter-clockwise

Cevap

The final output Gear Z rotates at

32\text{ rpm}

in a counter-clockwise direction.

The system features a two-stage reduction. In the first stage, Gear W drives Gear X, yielding a 4:1 reduction (

640\text{ rpm}

divided by 4 equals

160\text{ rpm}

) and a direction change to clockwise. Gear Y shares the axle with Gear X, so it also rotates at

160\text{ rpm}

clockwise. In the second stage, Gear Y drives Gear Z, creating a 5:1 reduction (

160\text{ rpm}

divided by 5 equals

32\text{ rpm}

) and reversing the direction back to counter-clockwise.

Adım Adım Çözüm

1

Calculate the speed and direction of Gear X.

Gear X rotates at

160\text{ rpm}

, clockwise.

Gear W (14 teeth) drives Gear X (56 teeth). The gear ratio is 56/14 = 4. Since the driven gear is larger, the speed is reduced:

640 / 4 = 160\text{ rpm}

. Meshing gears rotate in opposite directions, so Gear X turns clockwise.

2

Determine the speed and direction of Gear Y.

Gear Y rotates at

160\text{ rpm}

, clockwise.

Gear X and Gear Y share the same solid axle. Compound gears on the same axle always rotate at the exact same speed and in the same direction.

3

Calculate the speed and direction of Gear Z.

Gear Z rotates at

32\text{ rpm}

, counter-clockwise.

Gear Y (18 teeth) drives Gear Z (90 teeth). The gear ratio is 90/18 = 5. The speed is reduced again:

160 / 5 = 32\text{ rpm}

. Meshing gears reverse direction, so Gear Z turns counter-clockwise.

Anahtar Kavram

Compound Gear Trains and Speed Ratios

Soru 113Soru →

A $60\text{-pound}$ crate is placed on one end of a first-class lever, exactly $4\text{ feet}$ from the fulcrum. What downward effort force must be applied at a distance of $8\text{ feet}$ on the opposite side of the fulcrum to perfectly balance the lever?

Cevabı ve açıklamayı göster

Cevap: 30

Cevap

30\text{ lbs}

A lever is perfectly balanced when the turning force (torque) on one side of the fulcrum equals the torque on the other side. Torque is calculated by multiplying the force by its distance from the fulcrum. The crate creates a torque of

240\text{ ft-lbs}

(

60\text{ lbs} \times 4\text{ ft}

). Because the effort is being applied twice as far from the fulcrum (

8\text{ ft}

), it only needs to be half the force to generate the same

240\text{ ft-lbs}

of torque. Therefore,

240 \div 8 = 30\text{ lbs}

.

Adım Adım Çözüm

1

Set up the torque balance equation.

F_1 \times d_1 = F_2 \times d_2

For a lever to be balanced, the torque (force times distance) on the left side must equal the torque on the right side.

2

Substitute the known values into the equation.

60 \times 4 = F_2 \times 8

The crate applies a

60\text{ lb}

force at a distance of

4\text{ ft}

, and the effort force is applied at a distance of

8\text{ ft}

.

3

Solve for the unknown effort force (

F_2

).

240 = 8 \times F_2 \rightarrow F_2 = 30

Dividing both sides of the equation by

8

isolates

F_2

, revealing the required balancing force.

Anahtar Kavram

Torque equilibrium and mechanical advantage in a first-class lever

Tahmini Süre:45s

Soru 114Soru →

A mechanic is using a rigid steel bar as a lever to lift a heavy engine block. To require the LEAST amount of downward effort force, where should the fulcrum be placed?

As close to the engine block as possible

Exactly halfway between the mechanic and the engine block

As close to the mechanic's hands as possible

The position of the fulcrum does not affect the required effort force

Cevabı ve açıklamayı göster

Cevap: As close to the engine block as possible

Cevap

The fulcrum should be placed as close to the engine block as possible.

To minimize the effort force needed to lift a load using a lever, the mechanical advantage must be maximized. This is achieved by making the effort arm (the distance from where the mechanic pushes to the fulcrum) as long as possible, and the load arm (the distance from the engine block to the fulcrum) as short as possible. Placing the pivot point as close to the engine block as possible accomplishes this.

Adım Adım Çözüm

1

Identify the relationship between the fulcrum position and mechanical advantage.

Moving the fulcrum closer to the load increases the length of the effort arm relative to the length of the load arm.

Mechanical advantage in a lever depends entirely on the ratio of the effort arm to the load arm.

2

Determine which position provides the greatest mechanical advantage to minimize force.

Placing the fulcrum right next to the engine block (the load) maximizes the effort arm and minimizes the load arm.

A larger effort arm requires less physical effort force from the user to lift the same heavy load.

Anahtar Kavram

Mechanical advantage and fulcrum placement in first-class levers

Soru 115Soru →

A landscaper is using a wheelbarrow to move a $120\text{-pound}$ rock. The rock's center of gravity is positioned exactly $2\text{ feet}$ behind the wheel's axle, which acts as the fulcrum. The handles where the landscaper applies upward force are located $6\text{ feet}$ behind the wheel's axle. What upward lifting force must be applied at the handles to hold the wheelbarrow level?

20\text{ pounds}

40\text{ pounds}

60\text{ pounds}

360\text{ pounds}

Cevabı ve açıklamayı göster

Cevap: $40\text{ pounds}$

Cevap

The correct lifting force is

40\text{ pounds}

.

The correct answer is derived by balancing the torques around the fulcrum. The rock exerts a downward torque of

120\text{ pounds} \times 2\text{ feet} = 240\text{ foot-pounds}

. To keep the wheelbarrow level, the landscaper must exert an equal and opposite torque. By dividing the required torque (

240\text{ foot-pounds}

) by the distance of the handles from the fulcrum (

6\text{ feet}

), we find that

40\text{ pounds}

of upward force is required.

Adım Adım Çözüm

1

Identify the type of simple machine and the appropriate formula.

A wheelbarrow is a second-class lever. The principle of torque balance applies:

\text{Effort Force} \times \text{Effort Arm} = \text{Load Force} \times \text{Load Arm}

.

To find the unknown force, we must set the rotational forces (torques) equal to each other.

2

Determine the values for the load, load arm, and effort arm from the problem.

\text{Load Force} = 120\text{ pounds}

,

\text{Load Arm} = 2\text{ feet}

, and

\text{Effort Arm} = 6\text{ feet}

.

Correctly identifying distances relative to the fulcrum (the wheel's axle) is critical for calculating torque.

3

Substitute the values into the torque equation and solve for the Effort Force.

\text{Effort Force} \times 6 = 120 \times 2

. Simplifying gives

6 \times \text{Effort Force} = 240

. Dividing both sides by

6

gives

\text{Effort Force} = 40\text{ pounds}

.

This mathematically isolates the unknown variable to find the exact force required to balance the load.

Anahtar Kavram

Torque balance in a second-class lever dictates that the mechanical advantage is the ratio of the effort arm to the load arm.

Soru 116Soru →

Match each everyday tool to its correct lever classification based on the relative positions of the fulcrum, effort, and load.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Scissors match with First-class lever, a nutcracker matches with Second-class lever, and a swinging baseball bat matches with Third-class lever.

Each tool can be classified by identifying the component in the middle: Scissors have the fulcrum in the middle (Class 1), nutcrackers have the load in the middle (Class 2), and baseball bats have the effort applied in the middle (Class 3).

Adım Adım Çözüm

1

Analyze a pair of scissors

The fulcrum is in the middle, making it a first-class lever.

First-class levers always have the fulcrum positioned between the effort and the load.

2

Analyze a nutcracker

The load is in the middle, making it a second-class lever.

Second-class levers always have the load positioned between the fulcrum and the effort.

3

Analyze a swinging baseball bat

The effort is in the middle, making it a third-class lever.

Third-class levers always have the effort positioned between the fulcrum and the load.

Anahtar Kavram

Lever classes are defined by the component that is positioned in the middle: Fulcrum (1st class), Load (2nd class), or Effort (3rd class).

Tahmini Süre:45s

Soru 117Soru →

A person uses a straight-handled snow shovel to lift a $20\text{-pound}$ load of snow. The person's top hand acts as a stationary pivot (fulcrum) at the very end of the handle. Their lower hand applies an upward lifting effort $10\text{ inches}$ down the shaft from the top hand. If the center of the snow load is located $40\text{ inches}$ further down the shaft from the lower hand, what is the upward lifting force required by the lower hand to hold the shovel horizontally?

4\text{ lbs}

20\text{ lbs}

80\text{ lbs}

100\text{ lbs}

Cevabı ve açıklamayı göster

Cevap: $100\text{ lbs}$

Cevap

100\text{ lbs}

In a third-class lever, the effort is located between the fulcrum and the load. The distance from the fulcrum to the effort is

10\text{ inches}

, and the distance from the fulcrum to the load is

10 + 40 = 50\text{ inches}

. Setting the torques equal gives

F_E \times 10 = 20 \times 50

. Solving for

F_E

results in

100\text{ lbs}

.

Adım Adım Çözüm

1

Identify the lever class and the locations of the fulcrum, effort, and load.

The shovel acts as a third-class lever. Fulcrum is at the top hand, effort is applied at the lower hand, and load is at the snow.

This establishes the pivot point for calculating torque (moments).

2

Determine the effort arm (

d_E

) and the load arm (

d_L

).

d_E = 10\text{ inches}

. The load arm

d_L

is the total distance from the fulcrum to the load:

10\text{ inches} + 40\text{ inches} = 50\text{ inches}

.

Torque is always calculated as force multiplied by the distance from the fulcrum.

3

Apply the principle of moments (Torque equilibrium) to find the effort force (

F_E

).

F_E \times d_E = F_L \times d_L \Rightarrow F_E \times 10 = 20 \times 50 \Rightarrow F_E \times 10 = 1000 \Rightarrow F_E = 100\text{ lbs}

.

For the shovel to be held horizontally in equilibrium, the upward torque from the effort must equal the downward torque from the load.

Anahtar Kavram

Third-Class Levers and Torque Balance

Tahmini Süre:1m 0s

Soru 118Soru →

Match each lever configuration with its corresponding mechanical advantage and force direction properties.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Second-class levers multiply force without reversing direction. Third-class levers multiply distance without reversing direction. First-class levers with the fulcrum near the load multiply force and reverse direction. First-class levers with a centered fulcrum only reverse direction.

The correct pairings rely on evaluating two factors: whether the fulcrum sits between the effort and load (which determines if force direction is reversed), and the relative lengths of the effort and load arms (which determines if the lever multiplies force or distance).

Adım Adım Çözüm

1

Determine if the lever configuration reverses the direction of the applied force.

First-class levers reverse the direction of force. Second and third-class levers do not reverse the direction.

The fulcrum's position relative to the effort and load determines directional changes.

2

Compare the length of the effort arm to the load arm for each configuration.

Second-class levers and offset first-class levers have longer effort arms. Third-class levers have shorter effort arms. Centered first-class levers have equal arms.

The ratio of the effort arm to the load arm dictates the mechanical advantage (MA).

3

Match the mechanical advantage outcome to the lever configuration.

Longer effort arm = MA > 1 (multiplies force). Shorter effort arm = MA < 1 (multiplies distance/speed). Equal arms = MA of 1.

This establishes the direct relationship between physical lever structure and mechanical properties.

Anahtar Kavram

Mechanical Advantage of Lever Configurations

Soru 119Soru →

A worker uses an industrial paper cutter to slice through thick cardboard. The cutter operates as a second-class lever with the pivot (fulcrum) at one end of the blade. The cardboard is positioned $8\text{ inches}$ from the pivot and creates a cutting resistance of $120\text{ lbs}$ . If the worker pushes down on the handle at a distance of $40\text{ inches}$ from the pivot, what is the minimum downward effort force required to cut the cardboard?

24\text{ lbs}

30\text{ lbs}

20\text{ lbs}

600\text{ lbs}

Cevabı ve açıklamayı göster

Cevap: $24\text{ lbs}$

Cevap

The minimum downward effort force required is

24\text{ lbs}

.

In a second-class lever, the effort torque must equal the load torque. By multiplying the cutting resistance (

120\text{ lbs}

) by its distance from the fulcrum (

8\text{ inches}

), we find a load torque of

960\text{ inch-lbs}

. Dividing this torque by the total effort distance from the fulcrum (

40\text{ inches}

) gives a minimum effort force of

24\text{ lbs}

.

Adım Adım Çözüm

1

Identify the lever class and the given variables.

This is a second-class lever. Load (

F_L

) =

120\text{ lbs}

, Load arm (

d_L

) =

8\text{ inches}

, Effort arm (

d_E

) =

40\text{ inches}

.

Correctly identifying the lever class ensures that the distances are properly measured from the fulcrum.

2

Apply the torque balance (principle of moments) equation.

F_E \times d_E = F_L \times d_L

For the lever to balance and cut the cardboard, the input effort torque must equal the output load torque.

3

Substitute the known values and solve for the effort force (

F_E

).

F_E \times 40 = 120 \times 8 \rightarrow 40 F_E = 960 \rightarrow F_E = 24\text{ lbs}

.

Calculating this equation yields the minimum effort force required.

Anahtar Kavram

Torque Balance in Second-Class Levers

Tahmini Süre:1m 0s

Soru 120Soru →

A warehouse worker uses a first-class lever to lift a machinery part weighing $200\text{ lbs}$ . The fulcrum is placed exactly $2\text{ feet}$ from the machinery part. If the worker applies a downward effort force at a distance of $8\text{ feet}$ from the fulcrum on the opposite side, how much effort force is required to balance the load? (Assume the lever itself is weightless.)

Cevabı ve açıklamayı göster

Cevap: 50

Cevap

50

A first-class lever is balanced when the torque on one side of the fulcrum equals the torque on the other side. Torque is calculated by multiplying the force by its distance from the fulcrum. The machinery part creates a torque of

200\text{ lbs} \times 2\text{ ft} = 400\text{ ft-lbs}

. To balance this, the effort force applied at

8\text{ ft}

must also create

400\text{ ft-lbs}

of torque. Therefore, the required effort force is

\frac{400}{8} = 50\text{ lbs}

.

Adım Adım Çözüm

1

Set up the torque balance equation for a lever in equilibrium.

\text{Load} \times \text{Load Arm} = \text{Effort Force} \times \text{Effort Arm}

For a lever to balance, the rotational forces (torques) on both sides of the fulcrum must be equal.

2

Substitute the given values into the equation.

200 \times 2 = \text{Effort Force} \times 8

The load is

200\text{ lbs}

located

2\text{ ft}

from the fulcrum, and the effort is applied

8\text{ ft}

from the fulcrum.

3

Calculate the unknown effort force.

400 = \text{Effort Force} \times 8 \implies \text{Effort Force} = \frac{400}{8} = 50

Dividing the total load torque by the effort arm distance gives the required effort force.

Anahtar Kavram

The principle of moments (torque balance) dictates that a lever is in equilibrium when the clockwise torque equals the counterclockwise torque.

Simple Machines

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Alternatif Yöntem

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm