Examkin

Soru

Zorluk: OrtaSpeed and Road Conditions

An articulated commercial vehicle is traveling along a highway where a sudden rain shower has left standing water on the pavement. The posted dry-road speed limit is 45 mph45\text{ mph}, and the driver is approaching a curved off-ramp. Which of the following procedures should the driver follow to safely navigate the ramp and prevent loss of control?

  1. A
    Engage the engine retarder to its highest setting before reaching the ramp to provide extra stopping power on the wet surface.
  2. Decelerate to approximately 30 mph30\text{ mph} before entering the curve, turn off the engine retarder, and avoid sudden steering or braking inputs.Cevap
  3. C
    Maintain the 45 mph45\text{ mph} speed until reaching the apex of the curve, then apply firm service brakes while steering through the turn.
  4. D
    Calculate stopping distance using only the mechanical braking distance at 45 mph45\text{ mph}, disregarding perception and reaction distances on the wet road.

Cevap

Decelerate to approximately 30 mph30\text{ mph} before entering the curve, turn off the engine retarder, and avoid sudden steering or braking inputs.
According to standard commercial driving principles, driving on wet pavement requires reducing vehicle speed by approximately one-third (from 45 mph45\text{ mph} to about 30 mph30\text{ mph}) to prevent hydroplaning and maintain traction. Furthermore, speed must always be reduced before entering a curve rather than braking while turning, and auxiliary engine retarders must be disabled on slippery surfaces to prevent drive-wheel lockup and jackknifing.

Adım Adım Çözüm

1
Determine the required speed reduction for wet road conditions.
Reduce speed by approximately one-third from 45 mph45\text{ mph} down to roughly 30 mph30\text{ mph}.
Wet surfaces reduce tire traction and significantly increase the risk of hydroplaning and extended stopping distances.
2
Adjust vehicle speed prior to reaching the off-ramp curve.
The target speed of 30 mph30\text{ mph} is achieved before entering the curve.
Braking within a curve shifts weight and demands simultaneous cornering and braking traction, which can induce a spin or rollover.
3
Manage auxiliary braking systems.
The engine retarder is switched off.
Retarders apply continuous braking force only to the drive axle, which can lock drive wheels on slick pavement and cause a sudden jackknife.

Anahtar Kavram

Speed reduction on wet surfaces, curve entry speed management, and retarder safety.
Tahmini Süre:1m 0s
Bu soruyu puanla

Konular

Speed and Road Conditions

Bu konudan daha fazla soru