Examkin

Soru

Zorluk: Çok zorSpeed and Road Conditions

You are driving a loaded tractor-trailer at 60 mph on a dry highway. As you approach a sharp curve, the road surface suddenly transitions to packed snow. You spot a stalled vehicle just inside the curve, requiring you to come to a complete stop. According to commercial driving safety principles regarding speed and road conditions, which of the following is the correct sequence of actions to safely manage your vehicle?

  1. A
    Keep the engine retarder engaged to help the foundation brakes safely reduce your speed to 30 mph before the curve, preventing brake fade on the slippery surface.
  2. B
    Release the accelerator to begin slowing down, but wait to apply the foundation brakes until you are actively steering through the curve to precisely match your braking effort to the curve's radius.
  3. Immediately disable the engine retarder, reduce your speed to 30 mph or less before entering the curve, and anticipate a significantly longer total stopping distance.Cevap
  4. D
    Immediately disable the engine retarder and reduce your speed by half before the curve, assuming your ability to stop safely is determined exclusively by the mechanical braking distance required on the snow.

Cevap

Immediately disable the engine retarder, reduce your speed to 30 mph or less before entering the curve, and anticipate a significantly longer total stopping distance.
The correct sequence safely synthesizes three critical CDL rules: engine retarders must be disabled on slippery surfaces like packed snow to prevent drive-wheel lockup; speed must be reduced by at least half (60 mph to 30 mph or less) before entering a curve to maintain lateral traction; and the driver must account for total stopping distance, which includes perception, reaction, and braking distances.

Adım Adım Çözüm

1
Evaluate the road surface condition change from dry to packed snow.
Identify that packed snow requires reducing speed by at least one-half (from 60 mph to 30 mph) and disabling the engine retarder.
Official CDL guidelines mandate specific speed reductions for varying poor weather conditions and prohibit retarder use on slippery surfaces to prevent skids.
2
Analyze the upcoming road geometry (the curve).
Determine that all necessary braking must be completed in a straight line before entering the curve.
Braking within a curve, especially on packed snow, drastically reduces lateral traction and causes skidding.
3
Calculate the factors needed to stop for the stalled vehicle.
Recognize that total stopping distance is a combination of perception distance, reaction distance, and braking distance.
Focusing only on the mechanical braking distance is a dangerous oversight that underestimates the total space required to stop safely.

Anahtar Kavram

Speed Management for Road Conditions and Curves
Bu soruyu puanla

Konular

Speed and Road Conditions

Bu konudan daha fazla soru