Examkin

Soru

Zorluk: KolayPrinter Technologies and Consumables Maintenance

An IT technician is training a junior technician on laser printer operations. Place the following primary stages of the electrophotographic (EP) printing process in the correct order from first to last.

  1. 1The primary charge roller applies a uniform negative voltage to the photosensitive drum.
  2. 2A laser beam writes the image onto the drum, neutralizing the electrical charge in exposed areas.
  3. 3Toner is attracted from the developer roller to the discharged areas on the drum.
  4. 4The transfer roller applies a positive charge to the paper, pulling toner off the drum onto the page.
  5. 5Heat and pressure rollers melt the toner particles into the paper fibers.

Cevap

The correct order of the EP printing process stages is Charging, Exposing, Developing, Transferring, and Fusing.
The standard operational sequence for electrophotographic (EP) laser printing begins with Charging (conditioning the drum surface with high negative voltage), followed by Exposing (laser writes the latent image by neutralizing exposed areas), Developing (toner adheres to the exposed drum areas), Transferring (paper is charged to attract toner off the drum), and Fusing (heat and pressure permanently bind toner to paper).

Adım Adım Çözüm

1
Identify the initial conditioning phase.
Charging (item_1) is the first step.
The photosensitive drum must be uniformly charged before any image can be written onto it.
2
Identify the image creation phase.
Exposing (item_2) is the second step.
The laser writes the latent image by altering charges on the drum surface.
3
Identify the toner application phase.
Developing (item_3) is the third step.
Toner is transferred onto the drum where the laser exposed it.
4
Identify the paper transfer phase.
Transferring (item_4) is the fourth step.
An opposing charge pulls the toner from the drum onto the physical paper.
5
Identify the final bonding phase.
Fusing (item_5) is the fifth step.
Heat and pressure permanently melt the toner into the paper.

Anahtar Kavram

Electrophotographic (EP) Printing Process Steps
Bu soruyu puanla

Konular

Printer Technologies and Consumables Maintenance

Bu konudan daha fazla soru