Examkin

Soru

Zorluk: ZorLaptop Power Systems and Battery Management

A field technician is troubleshooting a newly deployed executive laptop. The laptop charges normally when directly connected to its included 65W USB-C AC power adapter. However, when the adapter is plugged into a USB-C multi-port travel hub with power pass-through and the hub is connected to the laptop, the operating system displays a low-power charger warning and the battery slowly drains under load. Which of the following is the MOST likely cause of this issue?

  1. The travel hub reserves a portion of the incoming wattage to power its internal circuitry and attached peripherals, reducing net power delivered to the laptop below its operational requirement.Cevap
  2. B
    The laptop's Lithium-ion battery requires a full discharge and recharge cycle to re-calibrate the BIOS power management controller's voltage thresholds.
  3. C
    The physical USB-C port on the hub requires an active DisplayPort Alt Mode connection to establish high-voltage Power Delivery negotiation with the host computer.
  4. D
    The laptop operating system automatically switches to an unmanaged high-performance profile upon hub detection, exceeding the power adapter's maximum total output.

Cevap

The travel hub reserves a portion of the incoming wattage for its internal circuitry and attached peripherals, reducing the total power delivered to the laptop below its minimum required threshold.
USB-C pass-through hubs subtract operational power (typically 10W to 15W) directly from the attached AC power adapter to operate their own internal chipsets and peripheral ports. When using the laptop's default 65W power adapter through the hub, the net power delivered to the host system drops to approximately 50W–55W. This wattage deficit causes the operating system to display a slow-charger warning and forces the laptop to draw supplemental power from its battery during high-utilization tasks.

Adım Adım Çözüm

1
Analyze baseline charging functionality.
The laptop charges correctly when connected directly to the standard 65W AC adapter, proving that the laptop's battery charging circuit and power adapter are fully operational.
Establishes a baseline and eliminates the AC adapter or internal laptop power hardware as the source of failure.
2
Evaluate the power consumption overhead introduced by the USB-C pass-through hub.
Pass-through hubs deduct overhead power (usually 5W–15W) from the incoming power adapter to drive internal controllers, HDMI converters, USB-A ports, and card readers.
Deducting 15W overhead from a 65W adapter leaves only 50W available to the laptop, which falls short of the system's 65W operational baseline.
3
Determine the proper corrective action.
Supply the hub with a higher-wattage power adapter (e.g., 85W–100W) or plug the 65W adapter directly into the laptop.
Ensures the host laptop receives its full required 65W while still allowing the hub to reserve necessary operational power.

Anahtar Kavram

USB-C Power Delivery Wattage Allocation and Pass-Through Overhead
Bu soruyu puanla

Konular

Laptop Power Systems and Battery Management

Bu konudan daha fazla soru