Examkin

Mobile Devices

271 soru

Tüm türler271Çoktan seçmeli136Çoklu seçim57Eşleştirme53Sıralama25
Soru 1Soru →

A network technician is setting up a new corporate smartphone for an executive who requires real-time synchronization of emails, calendar items, and read/unread status across both the mobile device and a desktop client. Additionally, the technician must catalog the physical handset's unique hardware serial identifier into the company's Mobile Device Management (MDM) inventory database. Which TWO of the following configuration steps or administrative actions should the technician perform to fulfill these requirements? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Configure the mobile email client using IMAP (Internet Message Access Protocol).; Record the device's 15-digit International Mobile Equipment Identity (IMEI) number in the inventory system.

Cevap

The technician should configure the mobile email client using IMAP to allow multi-device synchronization and record the 15-digit International Mobile Equipment Identity (IMEI) number to track the physical hardware device.
IMAP keeps mail on the server so that actions performed on one device (such as reading, deleting, or organizing messages into folders) reflect immediately across all other connected devices. The IMEI is the 15-digit globally unique serial number assigned to the physical mobile device, which is required for inventory and hardware tracking in MDM systems.

Adım Adım Çözüm

1
Determine the appropriate email protocol for multi-device synchronization
Select IMAP because it stores messages on the mail server and synchronizes status changes across all connected devices.
POP3 only downloads messages locally to a single device and does not sync read/unread flags across clients.
2
Identify the correct hardware identifier for cataloging the physical smartphone
Select the International Mobile Equipment Identity (IMEI) number.
IMEI uniquely identifies the physical mobile handset, whereas IMSI identifies the SIM card and cellular subscriber network profile.

Anahtar Kavram

Mobile Device Email Protocols and Cellular Identifier Provisioning
Soru 2Soru →

A technician is replacing the display components on a legacy laptop equipped with a Cold Cathode Fluorescent Lamp (CCFL) backlighting system. Which display component is responsible for converting direct current (DC) power from the motherboard into alternating current (AC) power to illuminate the backlight?

Cevabı ve açıklamayı göster

Cevap: Inverter board

Cevap

The inverter board is the component that converts low-voltage DC power into high-voltage AC power for a CCFL backlight.
In older laptop LCD screens that utilize Cold Cathode Fluorescent Lamp (CCFL) backlights, an inverter board is required to transform low-voltage DC power coming from the laptop's motherboard into high-voltage AC power to strike and light the fluorescent lamp.

Adım Adım Çözüm

1
Determine the power requirements of CCFL display technology.
CCFL backlights operate on high-voltage alternating current (AC).
Fluorescent lighting tubes require AC voltage to produce light, whereas the laptop motherboard provides low-voltage DC current.
2
Identify the component that converts DC voltage to AC voltage within the screen assembly.
The inverter board performs DC-to-AC power conversion.
The inverter board acts as a power converter specifically designed to drive CCFL backlights in LCD displays.

Anahtar Kavram

Laptop CCFL Backlighting and Inverter Boards
Soru 3Soru →

A technician is preparing to replace a swollen internal Lithium-ion battery in a corporate laptop. Place the following repair steps in the correct order from first to last to safely complete the battery replacement process.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence for safely replacing an internal swollen battery is: 1) Disconnect external AC power and shut down the laptop; 2) Remove the bottom enclosure panel; 3) Disconnect the internal battery power harness from the motherboard; 4) Unfasten and place the swollen battery in a fire-safe container; 5) Install the replacement battery, connect its harness, and secure the chassis cover.
The proper ordering prioritizes safety and electrical protection: disconnect external power first, open the enclosure, isolate internal electrical energy by disconnecting the battery connector from the motherboard, safely extract and contain the hazardous swollen battery, and finally install the replacement and close the chassis.

Adım Adım Çözüm

1
Isolate external power sources.
The AC adapter is unplugged and the laptop is completely powered off.
Prevents electrical shock and guards against accidental power delivery during initial handling.
2
Open the laptop lower casing.
The bottom chassis cover is removed, exposing internal components.
Access to non-removable internal laptop batteries requires removing the base plate.
3
Isolate internal electrical circuits.
The battery harness is detached from the system motherboard connector.
Disconnecting internal battery power before loosening internal screws prevents tool-induced short circuits on the motherboard.
4
Remove and contain the compromised battery.
The swollen Li-ion battery is unfastened and placed into a hazardous thermal safety vessel.
Physical swelling indicates gas accumulation inside cells; immediate isolation in a fire-safe storage container prevents fire hazards.
5
Install replacement hardware and close enclosure.
New battery is seated, wired to the system board, and base chassis is closed.
Restores laptop operation to a safe, functional state.

Anahtar Kavram

Internal Swollen Battery Safe Replacement Procedure
Tahmini Süre:1m 30s
Soru 4Soru →

A field technician is troubleshooting a corporate laptop whose internal display screen remains completely dark. Connecting an external monitor confirms that the operating system and GPU are functioning normally. When shining a high-intensity flashlight closely onto the laptop screen, the technician can faintly perceive active desktop windows and the mouse cursor. Upon removing the display bezel to inspect internal connections, the technician observes that no inverter board is installed within the display housing. Which of the following best explains why an inverter board is absent in this laptop display design and identifies the illumination source?

Cevabı ve açıklamayı göster

Cevap: The laptop uses an LED-backlit LCD screen, which receives low-voltage DC power directly from the motherboard via the video cable without requiring a high-voltage AC inverter.

Cevap

LED-backlit LCD displays receive direct low-voltage DC power from the motherboard through the video cable, making a separate high-voltage AC inverter board unnecessary.
The faint image visible under direct light confirms that the LCD layer is working, but the backlighting is off. Modern laptops use LED backlights which operate on low-voltage DC provided directly through the main video cable from the motherboard. Therefore, no high-voltage AC inverter board is required or present in the display housing.

Adım Adım Çözüm

1
Analyze the reported symptom (faint image visible with a flashlight).
Confirm that the LCD display matrix, GPU, and system board are rendering video correctly, but the display backlight system has failed.
A visible faint image under external light indicates the liquid crystals are functioning, but illumination behind the screen is missing.
2
Evaluate the physical component observations inside the display assembly.
Identify that the laptop lacks an inverter board because it utilizes light-emitting diode (LED) backlighting rather than cold cathode fluorescent lamp (CCFL) backlighting.
Older CCFL backlights required high-voltage AC provided by an inverter board, whereas modern LED backlights use low-voltage DC directly from the system board.

Anahtar Kavram

Laptop LED Backlight Architecture vs. Legacy CCFL Inverters
Tahmini Süre:2m 0s
Soru 5Soru →

A field service technician is troubleshooting a corporate smartphone used inside a crowded multi-AP facility. The phone experiences severe throughput degradation and frequent packet loss while connected to the 2.4 GHz Wi-Fi network, despite displaying a strong signal indicator. A site survey reveals that the local access point is broadcasting on 2.4 GHz Channel 4, while neighboring access points are actively transmitting on Channel 1 and Channel 6. Which of the following actions should the technician take to resolve the mobile device's connectivity issue?

Cevabı ve açıklamayı göster

Cevap: Reconfigure the access point to broadcast on non-overlapping Channel 11.

Cevap

Reconfigure the access point to broadcast on non-overlapping Channel 11.
In the 2.4 GHz wireless spectrum, each channel occupies 22 MHz of bandwidth while channels are spaced only 5 MHz apart. To prevent adjacent-channel interference, wireless networks must use non-overlapping channels (1, 6, and 11). Operating on Channel 4 causes overlap with both Channel 1 and Channel 6. Moving the access point to Channel 11 resolves the radio frequency interference for connected mobile devices.

Adım Adım Çözüm

1
Analyze the symptoms and environmental survey data.
The mobile device shows high signal strength but experiences packet loss and latency on 2.4 GHz Channel 4 due to adjacent access points using Channels 1 and 6.
In the 2.4 GHz Wi-Fi spectrum, channels overlap significantly unless separated by at least 5 channels.
2
Identify the standard non-overlapping 2.4 GHz channels.
Channels 1, 6, and 11 are the three standard non-overlapping channels in North America/International 2.4 GHz deployments.
Channel 4 overlaps with both Channel 1 (2412 MHz) and Channel 6 (2437 MHz), causing destructive adjacent-channel interference.
3
Select the correct mitigation strategy.
Reconfiguring the AP to Channel 11 isolates its spectrum from Channels 1 and 6.
Shifting the frequency band to Channel 11 restores reliable wireless packet delivery for mobile clients.

Anahtar Kavram

2.4 GHz Wi-Fi non-overlapping channel selection (Channels 1, 6, 11) to eliminate adjacent-channel interference.
Tahmini Süre:2m 0s
Soru 6Soru →

A field technician is replacing a swollen internal Lithium-ion battery and a damaged internal DC power jack inside an enterprise laptop. Which TWO of the following actions should the technician take to perform this repair safely and correctly?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Disconnect the external AC power adapter and disable or disconnect the battery before handling internal components.; Carefully route internal power wiring along chassis cable guides to prevent wire pinching when securing the bottom panel.

Cevap

The technician must disconnect the AC power adapter and internal battery before handling hardware, and route internal cabling cleanly along designated chassis channels to prevent pinching during reassembly.
Servicing internal laptop components safely requires removing all power sources (external AC power and the internal battery) to avoid electrical short circuits. Additionally, internal power wiring must be routed cleanly through chassis channels to prevent pinched or cut wires during reassembly.

Adım Adım Çözüm

1
Isolate all power sources by disconnecting the external AC adapter and removing or unplugging the internal battery connection.
The motherboard and internal components are completely de-energized.
Working on laptop components under live electrical power risks short-circuiting sensitive surface-mount devices or causing electrical injury.
2
Install the replacement DC power jack and route its wiring through built-in chassis guides.
Cables lie flat within assigned channels away from screw holes and outer casing seams.
Pinching wires under chassis covers can strip cable insulation, leading to electrical shorts or hardware failure.

Anahtar Kavram

Laptop Hardware Safety, Disassembly, and Cabling Best Practices
Tahmini Süre:1m 15s
Soru 7Soru →

A network technician is inventorying corporate mobile devices. The technician needs to record the unique 15-digit hardware serial number assigned to a smartphone by its manufacturer, which remains unchanged regardless of which SIM card or cellular carrier is used. Which identifier should the technician record?

Cevabı ve açıklamayı göster

Cevap: International Mobile Equipment Identity (IMEI)

Cevap

International Mobile Equipment Identity (IMEI)
The International Mobile Equipment Identity (IMEI) is a unique 15-digit code assigned by the hardware manufacturer to identify a specific mobile device. Because it is hardcoded into the device hardware, it remains identical even if the SIM card or cellular carrier is changed.

Adım Adım Çözüm

1
Identify the core requirement in the scenario.
The requirement is to identify the unique physical hardware serial number assigned to a smartphone by its manufacturer that remains constant regardless of SIM card changes.
Physical device identification must be distinguished from network or subscriber account identification.
2
Evaluate the difference between mobile hardware and subscriber identification.
The International Mobile Equipment Identity (IMEI) is permanently tied to the physical mobile handset, while the International Mobile Subscriber Identity (IMSI) is tied to the SIM card and cellular subscriber account.
The IMEI allows cellular networks to identify and track physical devices independently of SIM card swaps.

Anahtar Kavram

Mobile Device Hardware Identification (IMEI vs. IMSI)
Soru 8Soru →

A field technician is servicing a high-performance laptop brought in for repair due to an unlit display. The user reports that after a minor drop, the built-in screen went dark, although status LEDs remain active and connecting an external monitor displays the operating system normally. Upon disassembling the screen bezel, the technician verifies that the laptop is equipped with an Organic Light-Emitting Diode (OLED) panel. A junior technician assisting with the repair suggests ordering a replacement inverter board to fix the backlight power supply. Which of the following statements best evaluates the junior technician's recommendation?

Cevabı ve açıklamayı göster

Cevap: The recommendation is incorrect because OLED panels utilize self-emitting pixels and do not require a backlight or an inverter board.

Cevap

The recommendation is incorrect because OLED panels utilize self-emitting pixels and do not require a backlight or an inverter board.
The evaluation stating that OLED panels use self-emitting pixels and do not require a backlight or inverter board is correct. OLED (Organic Light-Emitting Diode) displays generate light natively at each pixel when voltage is applied. Consequently, there is no backlight unit or DC-to-AC inverter board inside an OLED laptop display assembly.

Adım Adım Çözüm

1
Identify the display technology specified in the scenario
The screen is confirmed to be an Organic Light-Emitting Diode (OLED) panel.
Different display technologies (CCFL-backlit LCD, LED-backlit LCD, OLED) use fundamentally different power and illumination components.
2
Analyze the operational mechanism of OLED technology
OLED pixels produce their own illumination individually when electric current passes through organic compounds.
Because each pixel is self-illuminating, OLED panels do not use a separate backlight matrix, diffuser layer, or inverter board.
3
Evaluate the junior technician's troubleshooting recommendation
Recommending an inverter replacement is invalid because an inverter board does not exist in an OLED display assembly.
Inverter boards are exclusively used in legacy CCFL LCD displays to convert low-voltage DC power into high-voltage AC power for cold cathode tubes.

Anahtar Kavram

OLED Display Architecture vs. Legacy LCD Backlighting
Tahmini Süre:1m 30s
Soru 9Soru →

A network administrator is configuring secure mobile email client settings and troubleshooting wireless network connectivity for company-issued smartphones. Users report that when connected to the corporate guest Wi-Fi network, their mail applications fail to send outgoing messages and their devices display an IP address of 169.254.11.45. Which of the following actions should the administrator perform to resolve these issues? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Reconfigure the outgoing mail server settings to use SMTP over TLS on port 587 instead of unencrypted port 25.; Investigate the local DHCP server connectivity and pool scope on the guest Wi-Fi network to resolve the self-assigned address allocation.

Cevap

The administrator must reconfigure the outgoing mail server settings to use SMTP over TLS on port 587 and investigate the local DHCP server and scope availability on the guest Wi-Fi network.
The correct actions are updating the outgoing mail configuration to secure SMTP port 587 (which avoids guest network port 25 blocks) and checking DHCP server connectivity because the 169.254.x.x address signifies an APIPA failure caused by missing DHCP leases.

Adım Adım Çözüm

1
Analyze the IP address issue reported on the mobile devices.
The address 169.254.11.45 falls in the APIPA range (169.254.0.0/16), confirming the mobile device could not contact a active DHCP server.
Resolving APIPA issues requires restoring DHCP server reachability or expanding an exhausted IP pool on the guest Wi-Fi subnet.
2
Analyze the outgoing mail transport failure over the network.
Standard outbound SMTP port 25 is routinely blocked on guest networks; secure submission requires port 587 with TLS encryption.
Using port 587 provides secure, authenticated message submission that complies with network security policies.

Anahtar Kavram

Mobile network troubleshooting involves recognizing APIPA IP ranges as DHCP reachability failures and using standard secure mail ports (SMTP/TLS port 587) for mobile messaging client configuration.
Soru 10Soru →

An IT technician is auditing corporate mobile synchronization technologies and security controls for a fleet of enterprise mobile devices. Match each mobile synchronization method or security feature on the left with its corresponding enterprise capability or requirement on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Exchange ActiveSync (EAS)
Mobile Application Management (MAM)
USB-C Direct Connection
Single Sign-On (SSO) with Multi-Factor Authentication (MFA)

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Exchange ActiveSync matches synchronizing email, contacts, and calendar over mobile networks; Mobile Application Management matches containerization and DLP policies for BYOD apps; USB-C Direct Connection matches high-speed local data transfer without network dependency; Single Sign-On with MFA matches centralized secure cloud access validation.
Exchange ActiveSync is the industry-standard protocol for over-the-air push sync of corporate email, contacts, and calendars. Mobile Application Management applies targeted policies to enterprise apps on personal devices. USB-C direct connections perform rapid local host transfers without network exposure. SSO with MFA secures cloud service authentication through centralized credentials and multi-factor validation.

Adım Adım Çözüm

1
Identify the synchronization protocol for messaging and calendar services across wireless networks.
Exchange ActiveSync (EAS) is designed specifically for over-the-air synchronization of mail, contacts, and calendar data.
EAS provides push synchronization across cellular and Wi-Fi connections.
2
Evaluate the management strategy for corporate app data isolation on personal devices.
Mobile Application Management (MAM) enforces containerization and DLP on specific enterprise applications without managing personal device data.
MAM isolates company data within managed applications on BYOD hardware.
3
Determine the physical connection medium suitable for offline, high-speed local computer sync.
USB-C direct cabling provides physical medium connectivity for rapid file transfer and local computer backups.
Wired physical connections bypass wireless bandwidth constraints and cloud routing.
4
Select the identity and access management control for unified cloud synchronization.
SSO with MFA provides centralized authentication and access control across enterprise cloud endpoints.
SSO streamlines access across platforms while MFA ensures identity verification security.

Anahtar Kavram

Mobile Device Synchronization Methods and Enterprise Security Controls
Soru 11Soru →

An IT technician is configuring cloud email and synchronization settings for sales representatives who use personal smartphones (BYOD). The company requires real-time, two-way push synchronization for corporate emails and calendars, as well as the ability to remotely wipe corporate data without modifying or clearing personal photos and applications on the employee's device. Which TWO of the following options should the technician implement to meet these requirements? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Configure Exchange ActiveSync (EAS) for corporate email account synchronization.; Implement Mobile Application Management (MAM) to partition and control corporate app data.

Cevap

The technician should configure Exchange ActiveSync (EAS) for real-time push synchronization of mail and calendar items, and deploy Mobile Application Management (MAM) to manage and selectively wipe corporate application data on personal devices.
Exchange ActiveSync (EAS) is designed specifically for mobile synchronization, offering real-time two-way push sync for mail, calendar, and contacts. Mobile Application Management (MAM) secures corporate data within managed app containers, allowing administrators to execute selective wipes of corporate data while leaving personal files and applications untouched on BYOD devices.

Adım Adım Çözüm

1
Determine the optimal email synchronization protocol
Exchange ActiveSync (EAS) provides real-time, two-way push synchronization for emails, calendar entries, and contacts.
POP3 only downloads messages to a single endpoint without synchronizing flags or sent items across multiple devices.
2
Identify the mobile security framework suitable for BYOD environments
Mobile Application Management (MAM) creates a secure corporate container and enables selective wiping of corporate data.
Full MDM enrollment allows full device wipes that remove personal user data, which violates BYOD privacy policies.

Anahtar Kavram

Mobile Data Synchronization Protocols and Mobile Application Management (MAM)
Soru 12Soru →

A technician is servicing a modern laptop equipped with an organic light-emitting diode (OLED) display screen. Which TWO of the following hardware components are typically housed within or routed through the laptop display bezel assembly? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Wi-Fi antenna harness cables; Integrated webcam module

Cevap

Wi-Fi antenna harness cables and the integrated webcam module are the components located inside or routed through the display bezel assembly.
The upper display housing of a laptop typically contains the display panel itself, the integrated webcam module positioned in the upper bezel, and the Wi-Fi antenna harness routed along the screen edges to provide maximum wireless range.

Adım Adım Çözüm

1
Identify the components housed within a laptop's upper display assembly.
Components in the display assembly include the display panel, digitizer (if touch-enabled), webcam/microphone array, and wireless antenna leads.
Antennas are placed high in the display lid for maximum signal range, and webcams align with user sightlines at the top of the bezel.
2
Differentiate OLED display architecture from legacy LCD displays.
OLED displays use emissive pixels and do not use a separate backlight or backlight inverter board.
Inverter boards are only used in older CCFL LCD screens to convert DC power to AC for fluorescent tubes.

Anahtar Kavram

Laptop Display Assembly Components
Tahmini Süre:1m 0s
Soru 13Soru →

Match each mobile wireless network configuration setting or subsystem on the left with its corresponding technical function on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Access Point Name (APN)
Baseband OS Firmware
Preferred Roaming List (PRL)
Product Release Information (PRI)

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Access Point Name (APN) defines cellular data gateway IP parameters; Baseband OS Firmware manages low-level radio frequency modem communications; Preferred Roaming List (PRL) specifies carrier tower frequency priorities for roaming; Product Release Information (PRI) delivers operator-specific configuration profiles.
Each subsystem and configuration file serves a specific mobile network role: Access Point Name (APN) configures gateway IP paths for mobile internet access; Baseband OS Firmware manages the physical radio modem processing; Preferred Roaming List (PRL) specifies tower search frequencies; and Product Release Information (PRI) applies carrier-specific feature profiles.

Adım Adım Çözüm

1
Analyze Access Point Name (APN)
Matched APN with gateway IP parameters and data routing.
APN configurations specify the network gateway through which cellular data traffic is encapsulated and transmitted.
2
Analyze Baseband OS Firmware
Matched Baseband OS with real-time radio frequency modem processing.
The baseband processor runs its own real-time operating system dedicated exclusively to communicating with cellular networks.
3
Analyze Preferred Roaming List (PRL)
Matched PRL with carrier frequency tables and tower prioritization.
PRL files instruct the mobile radio which frequency bands to scan when attempting to connect to home or roaming cell sites.
4
Analyze Product Release Information (PRI)
Matched PRI with operator-specific device settings and profile updates.
PRI updates configure carrier-specific features such as VoLTE flags, emergency settings, and regional network configurations.

Anahtar Kavram

Mobile Device Cellular Network Settings and Subsystems
Tahmini Süre:1m 30s
Soru 14Soru →

A helpdesk technician is performing component classification on parts harvested from various laptop display assemblies. Match each laptop display component on the left with its corresponding primary operational function or physical characteristic on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Inverter Board
Digitizer Panel
OLED Display Panel
Antenna Harness

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Inverter Board pairs with converting low-voltage DC to high-voltage AC for CCFL backlights; Digitizer Panel pairs with translating physical touch into digital coordinates; OLED Display Panel pairs with employing self-emissive organic pixels; Antenna Harness pairs with routing RF coaxial cables around the display bezel.
Each laptop display component fulfills a specialized role within the display housing: Inverter boards step up power for CCFL backlights; Digitizer panels convert screen touch contact into input data; OLED panels use self-emitting organic pixels without external backlights; and Antenna harnesses route RF wiring along the display top frame for optimal radio transmission.

Adım Adım Çözüm

1
Analyze power requirements for display lighting technologies.
Legacy CCFL backlights require an inverter board to transform low-voltage DC into high-voltage AC.
Standard laptop DC power cannot ignite or sustain CCFL fluorescent tubes without high-voltage AC conversion.
2
Evaluate display illumination structural differences.
OLED panels rely on self-emissive pixels rather than a backlight.
Each pixel generates its own light organically, making backlights and inverter boards completely unnecessary.
3
Identify non-display hardware housed within the upper assembly bezel.
Digitizers capture touch input coordinates, and antenna harnesses route radio frequency cables.
Placing wireless antenna leads high up inside the display bezel improves signal reception compared to keeping them inside the lower chassis.

Anahtar Kavram

Laptop display assembly component identification, functions, and technological characteristics.
Soru 15Soru →

A network technician is optimizing a 2.4 GHz wireless deployment in a corporate warehouse where handheld mobile inventory scanners frequently drop network connections. A site survey reveals that neighboring access points are broadcasting on channels 2, 3, and 4, resulting in severe performance degradation. Which of the following channel configurations should the technician implement on the access points to eliminate wireless channel overlap?

Cevabı ve açıklamayı göster

Cevap: Reconfigure the access points to use non-overlapping channels 1, 6, and 11.

Cevap

Reconfigure the access points to use non-overlapping channels 1, 6, and 11.
Configuring 2.4 GHz access points to use channels 1, 6, and 11 prevents adjacent-channel interference. In standard 2.4 GHz Wi-Fi networks, these three channels are the only non-overlapping channel combination available in North America and many standard regulatory domains.

Adım Adım Çözüm

1
Analyze the frequency characteristics of the 2.4 GHz wireless spectrum.
The 2.4 GHz band consists of 11 to 14 channels, each 22 MHz wide, spaced 5 MHz apart.
Because channels overlap with adjacent channels, operating on neighboring channels causes radio frequency interference.
2
Identify the standard non-overlapping channels for 2.4 GHz Wi-Fi deployments.
Channels 1, 6, and 11 have sufficient channel separation to prevent co-channel and adjacent-channel interference.
Using 1, 6, and 11 allows multiple access points to provide seamless coverage without interfering with one another.

Anahtar Kavram

2.4 GHz Wireless Channel Overlap and Selection
Soru 16Soru →

A field technician replaces a damaged LCD display panel on a laptop. After reassembling the display bezel and lid enclosure, the screen displays a clear image. However, the user notices that the laptop can no longer maintain a stable wireless network connection unless placed right next to the access point. Which of the following is the most likely cause of this issue?

Cevabı ve açıklamayı göster

Cevap: The Wi-Fi antenna wires routed inside the display bezel were pinched or disconnected during reassembly.

Cevap

The Wi-Fi antenna wires routed inside the display bezel were pinched or disconnected during reassembly.
Laptop Wi-Fi antenna leads are routed up through the display hinges and embedded around the frame of the screen assembly to maximize signal reception. If these delicate cables are pinched, severed, or detached during a panel replacement, the Wi-Fi card loses signal range drastically.

Adım Adım Çözüm

1
Identify the physical locations of key laptop display assembly components.
Laptops position wireless antenna harnesses at the top of the display housing for maximum height and signal coverage.
Antenna wires route through the hinges alongside the display video ribbon cable.
2
Correlate recent hardware repair actions with the symptom.
Disassembling the screen bezel requires disconnecting or unrouting internal cables.
Accidentally pinching or leaving the antenna connectors detached from the mini-PCIe/M.2 Wi-Fi card results in extremely poor signal reception.

Anahtar Kavram

Laptop Display Assembly Wire Routing and Wi-Fi Antenna Harnesses
Soru 17Soru →

An IT technician is preparing a fleet of new smartphones for field workers. The cellular service provider requests the unique 15-digit physical hardware identifier of each mobile handset so they can be registered on the cellular network. Which of the following identifiers should the technician provide to the carrier?

Cevabı ve açıklamayı göster

Cevap: International Mobile Equipment Identity (IMEI)

Cevap

The International Mobile Equipment Identity (IMEI)
The International Mobile Equipment Identity (IMEI) is a globally unique 15-digit serial number assigned to cellular-capable mobile devices. Network operators use the IMEI to identify valid physical devices and prevent blocked or stolen phones from accessing their network.

Adım Adım Çözüm

1
Identify the cellular provider's requirement
The requirement asks for the physical mobile device hardware identifier.
Carriers require the physical hardware ID to provision or whitelist specific phone units.
2
Differentiate between mobile identifiers
The International Mobile Equipment Identity (IMEI) uniquely identifies the physical phone hardware, whereas the IMSI identifies the SIM subscriber account.
Understanding the distinction between hardware hardware IDs (IMEI) and subscriber card IDs (IMSI) ensures proper registration.

Anahtar Kavram

Mobile Device Hardware Identifiers (IMEI vs. IMSI)
Soru 18Soru →

A mobility technician is training a junior technician on mobile network connectivity components and device identifiers. Match each mobile connectivity term on the left to its correct technical description on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

IMEI
IMSI
Baseband Update
APN

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

IMEI matches the unique 15-digit physical device serial number; IMSI matches the unique subscriber identifier tied to the SIM card; Baseband Update matches the radio interface firmware update controlling cellular communications; APN matches the network configuration defining the cellular data gateway routing.
Each cellular connectivity term correctly aligns with its distinct operational level: IMEI identifies physical hardware, IMSI identifies the SIM card user/subscriber, Baseband updates update modem radio firmware, and APN settings direct data traffic through the correct carrier gateway.

Adım Adım Çözüm

1
Differentiate device hardware identification from subscriber identity.
Identify that IMEI represents the physical device hardware serial number, while IMSI identifies the subscriber account via the SIM card.
Hardware identifiers remain constant regardless of SIM card swaps, whereas subscriber identifiers change when swapping SIM cards.
2
Identify radio firmware and cellular data path configurations.
Match Baseband Update to radio chip firmware updates and APN to cellular gateway routing settings.
Baseband code handles radio hardware signaling with cell towers, while APN defines the routing and network access parameters for cellular data.

Anahtar Kavram

Mobile Device Cellular Identifiers and Radio Configuration
Tahmini Süre:1m 30s
Soru 19Soru →

A technician is disassembling the upper clamshell display assembly of a modern touchscreen laptop equipped with an LED-backlit screen. Which TWO of the following components are physically housed inside or routed through this display enclosure?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Touchscreen digitizer layer; Wi-Fi antenna wire harness

Cevap

The touchscreen digitizer layer and the Wi-Fi antenna wire harness are both located inside the laptop display enclosure assembly.
The touchscreen digitizer layer (which converts touch contacts into digitised data) and the Wi-Fi antenna wire harness (routed into the top of the display bezel for maximum radio coverage) are standard internal components of the upper display assembly frame.

Adım Adım Çözüm

1
Identify components integrated within a modern touchscreen laptop's top enclosure.
Recognize that the glass digitizer grid overlays the LCD panel and the Wi-Fi antenna leads extend into the top bezel frame.
Positioning the Wi-Fi antenna in the top lid provides optimal signal reception clear of lower chassis interference, while the digitizer captures touch input on the screen.
2
Evaluate and rule out base chassis components and legacy display parts.
Eliminate the CCFL inverter board (LED backlights do not use inverters), SO-DIMM RAM slots (located on the system motherboard), and audio CODEC chips (integrated into the motherboard in the base).
Modern LED displays use direct DC power from the motherboard/display cable, while memory modules and audio controllers belong in the main base unit.

Anahtar Kavram

Laptop Display Enclosure Assembly Components
Soru 20Soru →

An IT support technician is preparing a bill of materials to repair a damaged laptop display screen. The laptop manufacturer documentation specifies that the unit features an organic light-emitting diode (OLED) panel. A junior technician recommends ordering a replacement high-voltage inverter board alongside the replacement panel. Which of the following statements best explains why this recommendation is incorrect?

Cevabı ve açıklamayı göster

Cevap: OLED panels use self-emissive pixels that produce their own light, eliminating the need for a separate backlight assembly and inverter board.

Cevap

OLED panels use self-emissive pixels that produce their own light, eliminating the need for a separate backlight assembly and inverter board.
OLED screens utilize self-emissive organic materials where each individual pixel produces its own light when electric current passes through it. Because OLED displays do not rely on a separate backlight source—such as legacy CCFL fluorescent tubes—they operate strictly on direct current (DC) power and do not require a high-voltage DC-to-AC inverter board.

Adım Adım Çözüm

1
Identify the display technology specified in the scenario.
The screen uses Organic Light-Emitting Diode (OLED) technology.
Different display panel technologies (LCD vs. OLED) use distinct illumination methods.
2
Analyze the illumination mechanism of OLED displays.
OLED panels consist of individual organic compounds that emit their own light (self-emissive) when electric current is applied.
Because each pixel generates its own light, OLED displays do not require a separate backlight system.
3
Determine the necessity of a high-voltage inverter board.
Inverter boards are exclusively used in legacy cold cathode fluorescent lamp (CCFL) LCD displays to convert DC power from the motherboard to AC power. Since OLED displays have no CCFL backlight, an inverter board is completely unnecessary.
Recommending an inverter board for an OLED repair stems from confusing LCD backlighting components with OLED architecture.

Anahtar Kavram

OLED vs. LCD Display Architecture and Backlighting Components
Sayfa 1 / 14Sonraki
Mobile Devices Alıştırma Soruları — CompTIA A+ (Core 1 & Core 2) | Examkin