Examkin

Tüm alıştırma soruları

3551 soru

Tüm türler3,551Çoktan seçmeli1,809Çoklu seçim786Sayısal12Eşleştirme521Sıralama423
Soru 281Soru →

A systems administrator wants to capture CPU utilization data over an extended period into a log file using Performance Monitor. Place the administrative steps required to create a custom User Defined Data Collector Set in the correct chronological order.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with launching Performance Monitor using perfmon.msc, opening the Data Collector Set wizard under User Defined, configuring manual selection for performance counters, and finally choosing the Processor counters before completing the setup.
To create a custom performance log in Windows, an administrator must first open Performance Monitor via perfmon.msc, initiate a new Data Collector Set from the User Defined context menu, configure the wizard for manual counter collection, and lastly select the appropriate CPU counters before saving the collector set.

Adım Adım Çözüm

1
Launch Performance Monitor by executing perfmon.msc.
The Performance Monitor MMC utility opens.
You must open the tool before managing data collectors.
2
Navigate to Data Collector Sets > User Defined and select New > Data Collector Set.
The Create New Data Collector Set wizard opens.
User Defined collector sets allow custom counter logging.
3
Name the set and select 'Create manually (Advanced)' followed by 'Performance counter'.
The wizard advances to the counter selection screen.
Manual setup allows customization of specific objects and counters.
4
Click Add to select the Processor counters, set the sample interval, and complete the wizard.
The custom Data Collector Set is saved and ready to run.
Adding the CPU metrics defines what data will be collected in the log file.

Anahtar Kavram

Creating Performance Monitor Data Collector Sets
Soru 282Soru →

An IT technician completes a physical installation of an optional secondary paper tray and a hardware duplexing assembly on an existing enterprise laser multifunction device (MFD). However, when users try to print multi-page documents from their workstations, the option to print on both sides automatically remains greyed out in their print dialogs. Which of the following actions should the technician take to resolve this issue?

Cevabı ve açıklamayı göster

Cevap: Enable the installed accessories under the Device Settings tab in the printer properties on the print server.

Cevap

Enable the installed optional hardware accessories within the Device Settings tab of the printer properties on the central print server.
When optional hardware components (such as automatic duplexing units, envelope feeders, or additional paper trays) are added to a multifunction device or laser printer, the printer driver must be configured to recognize these additions. On Windows print servers or individual workstations, this is accomplished by navigating to Printer Properties -> Device Settings tab and setting the installed accessories to 'Installed'. Once configured on the server, the capabilities update across shared network clients.

Adım Adım Çözüm

1
Identify why the duplexing option is unavailable in client print dialogs.
The printer driver currently assumes the printer is in its factory default configuration without the physical duplex accessory.
Printer drivers do not always auto-detect physical modular hardware additions automatically after installation.
2
Access printer properties on the print server hosting the shared MFD.
Navigate to the Device Settings tab where optional hardware features (e.g., Duplex Unit, Tray 2, Finishing Options) are listed.
Administrative modifications made to driver settings on the print server automatically propagate the feature availability to connected network clients.
3
Toggle the Duplex Unit setting from 'Not Installed' to 'Installed' and apply changes.
Client workstations update their driver capability profiles, enabling the double-sided printing option in document print menus.
This updates the driver schema so rendering tools allow user selection of automatic double-sided printing.

Anahtar Kavram

Printer Driver Options & Hardware Accessory Configuration
Soru 283Soru →

A systems administrator is deploying cellular-enabled tablets to field service technicians. The tablets must maintain consistent email folder states and read status across multiple mobile devices while connecting to the corporate 2.4 GHz wireless network in warehouses without experiencing co-channel interference. Which TWO of the following configuration choices or procedures should the administrator implement?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Configure mobile email accounts using IMAP over SSL/TLS to enable multi-device mailbox synchronization.; Configure the 2.4 GHz wireless access points to use non-overlapping channels 1, 6, and 11.

Cevap

The administrator should configure mobile email accounts using IMAP over secure ports to maintain multi-device state synchronization, and set 2.4 GHz wireless access points to non-overlapping channels 1, 6, and 11 to eliminate co-channel interference.
IMAP is designed specifically for multi-device email synchronization because it maintains all messages and folder flags directly on the central mail server. Additionally, configuring 2.4 GHz Wi-Fi networks on channels 1, 6, and 11 prevents wireless frequency overlap and signal degradation.

Adım Adım Çözüm

1
Evaluate the email synchronization requirement across multiple devices.
IMAP (Internet Message Access Protocol) leaves messages on the mail server and synchronizes status (read, unread, deleted) across all user devices. POP3 downloads messages locally to a single device and breaks multi-device access.
Field technicians need access to consistent email status on all their mobile devices.
2
Evaluate the 2.4 GHz wireless channel deployment requirement.
The 2.4 GHz Wi-Fi band consists of 11 channels in North America (13 globally), but only channels 1, 6, and 11 do not overlap with one another. Using adjacent channels like 2, 3, or 4 causes destructive channel overlap.
Non-overlapping channels ensure stable wireless network connectivity for mobile devices in high-density warehouse environments.

Anahtar Kavram

Mobile Device Wireless and Network Synchronization Configuration
Soru 284Soru →

A technician is performing a RAM upgrade on a compact All-in-One desktop system that uses a mobile motherboard architecture. The system currently contains one 8 GB memory module in slot A1, operating in single-channel mode. Motherboard documentation indicates that slot A1 belongs to Channel A and slot B1 belongs to Channel B, while slot A2 is the second slot on Channel A. To upgrade the system with a matching 8 GB module and enable dual-channel memory operation, which memory module form factor should the technician select, and into which slot should it be installed?

Cevabı ve açıklamayı göster

Cevap: 260-pin SO-DIMM module installed into slot B1

Cevap

260-pin SO-DIMM module installed into slot B1
Compact desktop designs and laptops that utilize mobile motherboard architecture require Small Outline DIMMs (SO-DIMMs), which use 260 pins for DDR4 memory. To activate dual-channel memory mode, memory sticks must be installed across distinct channels. Since slot A1 resides on Channel A, placing the second module in slot B1 on Channel B enables dual-channel memory throughput.

Adım Adım Çözüm

1
Determine the physical form factor requirement for the mobile motherboard architecture.
Identified that Small Outline Dual In-line Memory Modules (SO-DIMMs) are required for mobile and compact board designs (260 pins for DDR4), whereas full-sized desktop DIMMs (288 pins) will not fit.
Compact and mobile systems use smaller form-factor slots.
2
Determine the correct slot population for dual-channel performance.
Slot A1 is on Channel A, so the second module must be installed in slot B1 on Channel B.
Dual-channel architecture requires memory modules to be distributed across separate memory channels rather than shared on the same channel.

Anahtar Kavram

RAM Form Factors and Dual-Channel Memory Slot Population
Tahmini Süre:1m 15s
Soru 285Soru →

Match each cloud deployment model to its defining operational scenario.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Private Cloud
Public Cloud
Hybrid Cloud
Community Cloud

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Private Cloud pairs with infrastructure provisioned exclusively for a single enterprise. Public Cloud pairs with multi-tenant infrastructure available to the general public. Hybrid Cloud pairs with infrastructure combining on-premises systems with cloud services. Community Cloud pairs with shared infrastructure customized for multiple organizations with common requirements.
Each deployment model is uniquely categorized by ownership, tenancy, and user accessibility. Private cloud serves a single organization; public cloud serves the general public over the internet; hybrid cloud bridges private and public environments; community cloud serves distinct organizations with shared compliance or operational goals.

Adım Adım Çözüm

1
Identify the deployment model dedicated to one organization.
Private Cloud matches the single-enterprise exclusive model.
Exclusive allocation and dedicated ownership define a private cloud deployment.
2
Identify the multi-tenant public offering.
Public Cloud matches the multi-tenant infrastructure open to the general public.
Public cloud services are hosted by third parties and shared dynamically among multiple subscribers.
3
Identify the model connecting on-premises infrastructure with cloud resources.
Hybrid Cloud matches the combined infrastructure.
Hybrid cloud integrates private data centers with public cloud capacity.
4
Identify the model shared by organizations with joint goals or compliance requirements.
Community Cloud matches the shared infrastructure for specific partner entities.
Community cloud is jointly used by organizations with identical regulatory or security demands.

Anahtar Kavram

Cloud Deployment Models (Public, Private, Hybrid, Community)
Soru 286Soru →

A field technician is troubleshooting a Linux-based digital signage kiosk that fails to boot into the graphical desktop environment following an automated patch deployment. The technician has conducted tests and confirmed the theory of probable cause: a newly installed driver module conflicts with the integrated graphics controller. According to the CompTIA troubleshooting methodology, which of the following actions should the technician perform NEXT as part of establishing a plan of action? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Research vendor knowledge bases and patch notes to identify potential side effects of rolling back the driver module.; Perform a full configuration and data backup of the kiosk operating system prior to making software changes.

Cevap

The technician must research technical documentation for potential side effects and create a system backup before implementing modifications.
According to the official CompTIA 6-step troubleshooting model, once a theory of cause has been tested and confirmed (Step 3), the technician must proceed to Step 4: 'Establish a plan of action to resolve the problem and identify potential effects.' Researching potential side effects in vendor documentation and taking a full system backup before modifying software are core elements of establishing a plan of action and minimizing risk.

Adım Adım Çözüm

1
Identify the current stage in the CompTIA troubleshooting methodology.
The scenario specifies that testing confirmed the theory of probable cause, completing Step 3 (Test the theory to determine cause).
Determining the completed stage dictates the immediate next step in the standard model.
2
Determine the required tasks for Step 4 (Establish a plan of action to resolve the problem and identify potential effects).
Step 4 requires formulating a resolution plan, considering environmental or operational side effects, and establishing rollback/backup safety nets.
Resolutions should never be applied without evaluating impact and securing recovery options.
3
Select the options matching Step 4 requirements.
Consulting vendor documentation to anticipate side effects and creating a system backup directly align with Step 4 guidelines.
Preventive training occurs in Step 5, and physical drive replacement skips the methodology sequence.

Anahtar Kavram

CompTIA Troubleshooting Methodology - Step 4: Plan of Action
Soru 287Soru →

A desktop support technician is upgrading a workstation by installing a high-bandwidth PCIe x4 video capture card and installing a modular power supply unit (PSU). The workstation motherboard currently has one available PCIe x16 mechanical slot (wired electronically as x4) and three available PCIe x1 slots. Which TWO actions must the technician take to properly seat the expansion card and supply auxiliary power safely? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Install the capture card into the available PCIe x16 (wired x4) slot.; Use a PCIe 6+2 pin auxiliary power cable from the PSU if additional power is required by the card.

Cevap

The technician must install the card into the available PCIe x16 (wired x4) physical slot and use a PCIe 6+2 pin auxiliary power cable if additional power is required.
Seating the PCIe x4 card into the PCIe x16 slot (wired as x4) provides the necessary physical clearance and electrical bandwidth. Connecting a PCIe 6+2 pin connector supplies proper auxiliary +12V power without risking polarity mismatches associated with motherboard CPU power cables.

Adım Adım Çözüm

1
Determine physical slot compatibility and lane allocation.
The PCIe x4 card requires 4 PCIe data lanes and a physical slot size of x4 or larger. Installing it into the PCIe x16 physical slot (wired electronically as x4) satisfies both physical seating requirements and bandwidth needs.
PCIe permits upsizing (placing smaller lane cards into larger physical slots). Installing it in a PCIe x1 slot would limit bandwidth to x1 or fail physically on closed slots.
2
Identify the correct auxiliary power cable for expansion cards.
Select a PCIe 6+2 pin auxiliary power connector from the modular PSU.
PCIe power cables deliver +12V on specific pin locations required by graphics and expansion cards. EPS12V connectors deliver power intended for CPU sockets and carry inverted wire pinouts relative to PCIe power.

Anahtar Kavram

PCIe Slot Downward Compatibility & Auxiliary Connector Pinout Differences
Soru 288Soru →

A university computer science department is planning to deploy a web application for student assignment submissions. The department requires full administrative control over the guest operating system, network configuration, and middleware installation to support custom security tools, but wants the cloud provider to handle the physical server hardware and hypervisor infrastructure. Which cloud service model best meets these requirements?

Cevabı ve açıklamayı göster

Cevap: Infrastructure as a Service (IaaS)

Cevap

Infrastructure as a Service (IaaS) is the correct cloud service model.
Infrastructure as a Service (IaaS) provides virtualized server instances (VMs) where the subscriber retains administrative management of the operating system, storage, network components, and installed middleware, while the cloud provider manages the physical data center hardware, power, cooling, and hypervisor layer.

Adım Adım Çözüm

1
Analyze the customer's administrative requirements
The requirement specifies full root/administrator access to manage the operating system, middleware, and network configuration.
Identifying the layer of control required by the customer narrows down the shared responsibility model.
2
Evaluate the provider's responsibility scope
The provider is responsible only for physical hardware, facility security, and the hypervisor layer.
This division places infrastructure hardware on the provider while leaving OS and software management to the subscriber.
3
Match the scope of control to the cloud service model
Infrastructure as a Service (IaaS) provides virtual machines where subscribers manage the OS and software stack while providers manage physical assets.
PaaS and SaaS abstracts the operating system layer away from the customer.

Anahtar Kavram

Cloud Service Models and Shared Responsibility
Soru 289Soru →

A systems administrator is reviewing virtualization concepts and deployment scenarios. Match each hypervisor type or virtualization scenario on the left with its corresponding architectural characteristic on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Type 1 Hypervisor
Type 2 Hypervisor
Client-Side Developer Workstation
Enterprise Production Datacenter Host

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Type 1 Hypervisor pairs with direct installation on bare metal without a host OS. Type 2 Hypervisor pairs with installation as an application on top of an existing host OS. Client-Side Developer Workstation pairs with typical utilization of a Type 2 hypervisor for testing. Enterprise Production Datacenter Host pairs with requiring a Type 1 hypervisor to minimize latency and overhead.
Type 1 hypervisors execute directly on physical host hardware without an intermediary host operating system, making them ideal for enterprise datacenter hosts where low latency and resource efficiency are required. Type 2 hypervisors run as software applications inside an existing host operating system, making them well-suited for developer workstations and local desktop sandbox testing.

Adım Adım Çözüm

1
Identify the defining architectural difference between Type 1 and Type 2 hypervisors.
Type 1 hypervisors run directly on bare metal hardware, while Type 2 hypervisors run on top of an existing host operating system.
Hardware access layer placement determines hypervisor categorization.
2
Map the enterprise server scenario to the appropriate hypervisor architecture.
Enterprise production hosts require high performance and low overhead, which aligns with Type 1 bare-metal hypervisors.
Direct hardware control maximizes server density and reduces latency.
3
Map the desktop client scenario to the appropriate hypervisor architecture.
Developer workstations and desktop sandboxes prioritize quick installation on top of the user's primary operating system, matching Type 2 hosted hypervisors.
Convenience and integration with existing user operating systems make Type 2 hypervisors ideal for client-side application testing.

Anahtar Kavram

Type 1 (Bare-Metal) vs. Type 2 (Hosted) Hypervisor Architectures
Soru 290Soru →

A financial analytics firm maintains its confidential transaction database on dedicated, on-premises servers to satisfy strict regulatory compliance requirements. To manage predictable, heavy compute spikes during end-of-quarter auditing, the system administrator configures web front-end and processing workloads to automatically burst into a shared, third-party provider's infrastructure over an encrypted VPN tunnel. Which cloud deployment model is represented by this combined infrastructure?

Cevabı ve açıklamayı göster

Cevap: Hybrid cloud

Cevap

Hybrid cloud
The architecture described is a hybrid cloud model. Hybrid cloud connects private infrastructure (the on-premises database servers) with public cloud infrastructure (the third-party multi-tenant bursting compute nodes) via encrypted connections, allowing data and workload portability to handle fluctuating workloads seamlessly.

Adım Adım Çözüm

1
Analyze the baseline database environment and compliance requirement
The organization maintains dedicated on-premises servers for confidential data.
This component represents a private, dedicated environment owned and controlled internally.
2
Analyze the secondary infrastructure component utilized during high demand
Workloads dynamically scale into a multi-tenant third-party infrastructure during peak auditing periods.
Leveraging external, shared provider infrastructure on demand represents a public cloud model.
3
Synthesize the combined deployment architecture
Connecting private on-premises infrastructure with public cloud resources to enable cloud bursting creates a hybrid cloud model.
A hybrid cloud deployment is explicitly defined by the integration of two or more distinct cloud models (such as private and public).

Anahtar Kavram

Cloud Deployment Models (Hybrid Cloud & Cloud Bursting)
Soru 291Soru →

A technician is troubleshooting a commercial laser printer that produces output with two distinct defects on every print job: toner smudges and easily wipes off the paper when touched, and a faint duplicate image of previously printed text repeats vertically down the page at exact 94 mm intervals. A maintenance manual confirms that 94 mm corresponds to the circumference of the photosensitive drum. Which of the following combinations identifies the primary components responsible for these symptoms?

Cevabı ve açıklamayı göster

Cevap: A malfunctioning fuser assembly and a worn drum cleaning blade

Cevap

A malfunctioning fuser assembly and a worn drum cleaning blade
The correct answer identifies the fuser assembly and the drum cleaning blade. Loose toner that easily wipes off paper points directly to a failure in the fusing process, which relies on heat and pressure to permanently bond toner resin to paper fibers. Repeated ghost images occurring at exact intervals equal to the photosensitive drum circumference indicate that residual toner from a prior image was not scraped off during the cleaning phase, allowing leftover toner to transfer again on subsequent drum rotations.

Adım Adım Çözüm

1
Analyze the first defect (toner smudges and wipes off easily).
Identify that toner has been placed on the paper but not permanently bonded.
The fusing stage of the electrophotographic (EP) process uses heated rollers and pressure to melt plastic toner resin into paper fibers. If the fuser fails to reach adequate temperature or apply sufficient pressure, toner remains loose powder on the surface.
2
Analyze the second defect (repeating ghost image at 94 mm intervals).
Correlate the repeating interval with drum circumference and identify a failure in the cleaning phase.
Calculated defect spacing matching a specific roller's circumference indicates a physical defect or residual material on that roller. Ghosting occurring at the photosensitive drum circumference indicates that residual toner from a previous revolution was not wiped away by the cleaning blade before the next charging and writing cycle.
3
Synthesize both diagnostic findings to select the matching component pair.
Confirm that the combination of fuser assembly failure and drum cleaning blade failure accounts for both observed symptoms.
No single component failure accounts for both un-melted toner and un-cleared drum residue; they represent failures in the fusing phase and cleaning phase of the EP process, respectively.

Anahtar Kavram

Electrophotographic (EP) Print Process Component Failure Diagnosis
Soru 292Soru →

An IT infrastructure consultant is evaluating cloud service model boundaries for an enterprise retail organization. Match each cloud service model on the left to the client administration responsibility scope on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Infrastructure as a Service (IaaS)
Platform as a Service (PaaS)
Software as a Service (SaaS)

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Infrastructure as a Service (IaaS) matches installing guest operating systems, configuring network firewalls, and managing middleware while the vendor manages physical host hardware and hypervisors. Platform as a Service (PaaS) matches developing application code and managing database schemas while the vendor manages runtime environments, operating system updates, and physical hardware. Software as a Service (SaaS) matches configuring user access permissions and organizational data settings while the vendor manages application software, operating systems, and underlying hardware.
In cloud computing shared responsibility frameworks: IaaS requires client management from the guest OS up through the application stack. PaaS isolates client responsibility to application development and data schema management while vendor manages OS and runtime platforms. SaaS limits client interaction to user management and data settings while the provider handles all underlying infrastructure and application logic.

Adım Adım Çözüm

1
Identify client responsibilities under Infrastructure as a Service (IaaS)
IaaS grants root/administrative access over virtual compute instances, placing guest operating system maintenance, network security configurations, and software installations on the client.
The provider only maintains physical server hardware, storage arrays, networking backbones, and host hypervisors.
2
Identify client responsibilities under Platform as a Service (PaaS)
PaaS abstracts operating system and server administration, restricting client responsibilities to application code deployment and database configuration.
The cloud vendor manages runtime engine execution environments, OS security updates, and underlying hardware architecture.
3
Identify client responsibilities under Software as a Service (SaaS)
SaaS abstracts all system infrastructure and software architecture layers, leaving only account provisioning, user access rights, and client data handling under client control.
The vendor owns and maintains the entire application stack end-to-end as a turnkey cloud subscription service.

Anahtar Kavram

Shared Responsibility Model across Cloud Service Models (IaaS, PaaS, SaaS)
Soru 293Soru →

A technician is evaluating drive interface specifications for a server storage system upgrade. The system requires drives that support high data throughput for databases as well as legacy mass storage. Which of the following statements correctly describe the characteristics and performance capabilities of SAS, SATA III, and NVMe storage interfaces? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: NVMe drives interface directly with the PCIe bus to achieve significantly lower latency and higher transfer speeds than SATA III drives.; SAS drives support full-duplex communication and higher signal voltages, enabling longer cable lengths and enterprise reliability compared to SATA.

Cevap

NVMe drives interface directly with the PCIe bus to achieve lower latency and higher transfer speeds than SATA III drives, and SAS drives support full-duplex communication and higher signal voltages for enterprise reliability.
NVMe uses PCIe lanes to provide significantly higher bandwidth and reduced latency compared to SATA III. Additionally, SAS interfaces support full-duplex communication and higher signaling standards designed for high-availability enterprise drive arrays.

Adım Adım Çözüm

1
Analyze NVMe bus interface and protocol advantages over SATA III.
NVMe utilizes high-speed PCIe lanes directly, yielding throughput up to several thousand MB/s compared to the 6 Gbps (~600 MB/s) maximum of SATA III.
NVMe was designed specifically for flash memory access over PCIe to eliminate AHCI bottlenecks.
2
Evaluate enterprise SAS capabilities compared to SATA standards.
SAS provides full-duplex data transfer, dual-port capability, and higher drive reliability suitable for enterprise applications.
SATA operates only in half-duplex mode and lacks advanced dual-port signal features provided by SAS.
3
Evaluate misconceptions regarding SATA IOPS limits and M.2 form factor protocols.
SATA drives cannot achieve higher IOPS than NVMe due to queue depth limitations, and M.2 SATA drives remain bound by 6 Gbps bus speed.
Form factor (M.2) does not alter the underlying drive transfer protocol (SATA vs NVMe).

Anahtar Kavram

Storage Interface Standards (NVMe, SAS, SATA III) and Protocol Characteristics
Soru 294Soru →

Match each network cabling component or connector standard to its primary physical characteristic or deployment requirement.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

ST Connector
CMP (Plenum) Cable
MTRJ Connector
F-Type Connector

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

ST Connector matches the legacy bayonet twist-lock fiber connector; CMP Cable matches the fire-resistant cable for air-handling spaces; MTRJ Connector matches the dual-fiber small form-factor latching plug; F-Type Connector matches the threaded coaxial connection for cable modems.
Each item is matched according to its standard physical and mechanical specification. ST connectors use a bayonet twist lock, CMP cables meet plenum fire-safety standards, MTRJ integrates dual fiber strands into one small latching body, and F-type connectors feature threaded collars for coaxial cables.

Adım Adım Çözüm

1
Identify the physical design and key locking mechanism of optical fiber connectors.
ST connectors use a round bayonet twist-lock, while MTRJ combines two fiber strands into a single latching plug.
Differentiating connector form factors (bayonet vs latching SFF) allows accurate pair identification.
2
Evaluate safety ratings for environmental cable runs.
CMP (Plenum) rated cable is required for environmental air ducts due to fire-resistant jacketing.
Plenum spaces require CMP rated materials to prevent smoke toxicity during a fire.
3
Identify coaxial connector types for broadband services.
F-Type connectors feature a threaded screw collar for RG-6 coax terminations.
F-type connections secure coaxial cables to modems and distribution splitters.

Anahtar Kavram

Physical characteristics, form factors, and safety ratings of network cable media and connectors.
Soru 295Soru →

A network administrator is organizing network documentation for firewall port configurations and remote system management tools. Match each networking protocol on the left with its standard default port number and transport protocol on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Service Location Protocol (SLP)
Apple Filing Protocol (AFP)
Lightweight Directory Access Protocol (LDAP)
Simple Network Management Protocol (SNMP)

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Service Location Protocol (SLP) pairs with TCP/UDP 427, Apple Filing Protocol (AFP) pairs with TCP 548, Lightweight Directory Access Protocol (LDAP) pairs with TCP 389, and Simple Network Management Protocol (SNMP) pairs with UDP 161.
Each protocol correctly matches its standard assigned port and transport protocol: Service Location Protocol (SLP) uses TCP/UDP 427, Apple Filing Protocol (AFP) uses TCP 548, Lightweight Directory Access Protocol (LDAP) uses TCP 389, and Simple Network Management Protocol (SNMP) uses UDP 161.

Adım Adım Çözüm

1
Identify the primary service function of each listed protocol.
SLP performs LAN service discovery, AFP supports Apple file transfers, LDAP handles directory service authentication and queries, and SNMP manages network device telemetry.
Understanding the protocol function helps distinguish between file transfer, directory lookup, management, and service discovery categories.
2
Associate each protocol with its assigned well-known or registered port number and transport layer behavior.
SLP uses TCP/UDP port 427; AFP uses TCP port 548; unencrypted LDAP operates over TCP port 389; SNMP agent queries operate over UDP port 161.
CompTIA A+ Core 1 requires memorization of standardized default port numbers to properly configure network firewalls and diagnose service connectivity issues.

Anahtar Kavram

Standard Networking Port Assignments for Infrastructure Services
Soru 296Soru →

A network technician manually configures network settings on a workstation attached to a corporate local subnet. The workstation is assigned an IP address of 10.0.15.50 with a subnet mask of 255.255.255.0 and a default gateway address of 10.0.16.1. The workstation can successfully ping neighboring hosts within the 10.0.15.0/24 network, but cannot reach any hosts on external subnets or the internet. Which of the following best explains the reason for this connectivity issue?

Cevabı ve açıklamayı göster

Cevap: The default gateway is configured on a different IP subnet than the host machine.

Cevap

The default gateway is configured on a different IP subnet than the host machine.
For a workstation to communicate with networks outside its local subnet, its configured default gateway must reside on the same IP subnet. With a /24 mask (255.255.255.0), the IP 10.0.15.50 is on the 10.0.15.0 network, while 10.0.16.1 is on the 10.0.16.0 network. Consequently, the workstation cannot send outbound traffic to the gateway router.

Adım Adım Çözüm

1
Analyze the IP address configuration and subnet mask.
The host IP address 10.0.15.50 with a subnet mask of 255.255.255.0 (/24) places the host on the 10.0.15.0/24 subnet, covering IP addresses 10.0.15.1 through 10.0.15.254.
Determining the local subnet range allows verification of host and gateway compatibility.
2
Compare the default gateway address to the host subnet range.
The configured default gateway address 10.0.16.1 belongs to the 10.0.16.0/24 subnet, which is outside the local 10.0.15.0/24 broadcast domain.
For a host to forward out-of-subnet traffic, the default gateway must be a reachable Layer 3 router address located on the host's own local subnet.
3
Identify the cause of remote connectivity failure.
The host can reach local neighbors on 10.0.15.0/24 via ARP and Layer 2 switching, but it cannot deliver frames to 10.0.16.1 because that IP address is on another network segment.
A misconfigured default gateway on an improper subnet breaks all routing outside the local network.

Anahtar Kavram

Subnet Masking and Default Gateway Placement
Soru 297Soru →

A helpdesk technician is replacing a depleted maintenance component in a thermal receipt printer used at a retail point-of-sale checkout line. Which of the following primary consumables must be periodically installed or replaced in this type of printer?

Cevabı ve açıklamayı göster

Cevap: Specially treated heat-sensitive paper rolls

Cevap

Specially treated heat-sensitive paper rolls are the primary consumable required for direct thermal printers.
Direct thermal printing works by applying selective heat from a thermal printhead directly onto specially treated, heat-sensitive paper. Because the paper itself turns black when heated, no separate ink cartridge, toner powder, or ribbon is required.

Adım Adım Çözüm

1
Identify the technology specified in the scenario.
The printer is identified as a thermal receipt printer.
Different printing technologies require distinct consumables and maintenance items.
2
Recall the operating mechanism of direct thermal printing.
Direct thermal printers utilize a heated printhead applied directly against chemically treated thermal paper.
The paper itself reacts to heat to create the printed image, eliminating the need for ink ribbons, ink cartridges, or toner.

Anahtar Kavram

Direct Thermal Printer Consumables
Soru 298Soru →

A technician is installing several internal components and cabling during a desktop workstation deployment. Match each motherboard power connector or header on the left with its primary operational purpose and device targeted on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

8-pin EPS12V connector
6+2 pin PCIe connector
20+4 pin ATX connector
USB 3.2 Gen 2 Type-E header

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

The 8-pin EPS12V connector matches dedicated CPU power supply; the 6+2 pin PCIe connector matches supplemental graphics expansion card power; the 20+4 pin ATX connector matches primary motherboard system power; and the USB 3.2 Gen 2 Type-E header matches front-panel USB Type-C chassis port connectivity.
Each motherboard header and power connector serves a distinct electrical or signal transfer role: EPS12V delivers isolated +12V current directly to the CPU; 6+2 pin PCIe cables deliver extra power to expansion cards such as GPUs; the 20+4 pin ATX cable delivers main board operational power; and the USB 3.2 Gen 2 Type-E header interfaces the board's USB controller with front-panel USB Type-C ports.

Adım Adım Çözüm

1
Identify the CPU auxiliary power requirement.
Map the 8-pin EPS12V connector to supplying dedicated +12V power directly to the CPU socket.
EPS12V connectors feature distinct pin keying to prevent confusion with PCIe connectors and supply multi-rail +12V current to high-draw processors.
2
Identify the PCIe auxiliary power requirement for expansion cards.
Map the 6+2 pin PCIe connector to supplying supplemental power from the PSU directly to PCIe expansion cards like high-end GPUs.
PCIe slot power is limited to 75W, requiring high-draw GPUs to rely on 6-pin (75W) or 8-pin (150W) modular power leads directly from the power supply.
3
Identify main motherboard system board power connection.
Map the 20+4 pin ATX connector to primary motherboard power delivery (+3.3V, +5V, +12V, -12V, +5VSB).
The 24-pin ATX standard powers motherboard buses, memory modules, chipset logic, and standard expansion slots.
4
Identify internal front-panel USB Type-C header connections.
Map the USB 3.2 Gen 2 Type-E header to internal connection for chassis front-panel USB Type-C ports.
The Type-E internal header standard enables 10 Gbps (Gen 2) or 20 Gbps (Gen 2x2) signaling to front-panel Type-C connectors.

Anahtar Kavram

Motherboard power connectors and front-panel internal headers identification and use cases.
Tahmini Süre:2m 0s
Soru 299Soru →

A software development team needs to deploy local virtual environments on their existing Windows 11 desktop workstations to test cross-platform application builds. The virtual machines must run directly alongside their daily productivity software without replacing or reformatting the existing operating system. Which virtualization architecture best satisfies this requirement?

Cevabı ve açıklamayı göster

Cevap: A host-based hypervisor running as an application on top of the current desktop operating system

Cevap

A host-based hypervisor running as an application on top of the current desktop operating system
A host-based (Type 2) hypervisor executes as a software application on top of an existing host operating system. This allows software developers to launch and manage guest virtual machines locally while maintaining access to their existing workstation operating system and productivity applications.

Adım Adım Çözüm

1
Analyze the operational requirements from the scenario
The requirement calls for local virtual machines running alongside existing software without replacing the current desktop host OS.
Determining OS dependency differentiates Type 1 (bare-metal) from Type 2 (host-based) hypervisors.
2
Evaluate hypervisor architectural types against the requirement
A Type 2 (host-based) hypervisor operates on top of an existing operating system, allowing guest VMs and desktop applications to run concurrently.
Type 1 hypervisors interact directly with hardware and control the system, eliminating the workstation host OS.

Anahtar Kavram

Type 1 vs. Type 2 Hypervisor Architecture
Soru 300Soru →

Match each laptop display component listed on the left with its correct hardware function or design characteristic on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Inverter board
Touchscreen digitizer
OLED panel
Wi-Fi antenna harness

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

The inverter board converts low-voltage DC to high-voltage AC for CCFL backlights. The touchscreen digitizer translates physical screen contact into digital position data. The OLED panel uses self-emissive organic light sources without requiring a separate backlight assembly. The Wi-Fi antenna harness routes coaxial cables into the display bezel to maximize wireless reception.
Each component matches its primary function: inverter boards supply high AC voltage to CCFL backlights, digitizers translate touch input into digital coordinates, OLED panels produce self-emissive light without backlights, and antenna harnesses route through display bezels for superior reception.

Adım Adım Çözüm

1
Analyze the power supply requirements for CCFL display backlighting.
CCFL tubes require alternating current (AC) at high voltages. The inverter board converts direct current (DC) from the system power bus into high-voltage AC.
Without an inverter board, CCFL-based displays remain dark even when the LCD panel is rendering images.
2
Identify the touch input conversion component.
The touchscreen digitizer layer sits in front of the display panel and converts touch pressure/capacitance into digital signals for processing.
This component translates physical interaction into operating system mouse or gesture inputs.
3
Examine the structural differences between LED/LCD and OLED technologies.
OLED panels utilize self-emissive organic compounds that illuminate individually, rendering backlights and inverter boards completely redundant.
Each pixel produces its own light energy directly.
4
Determine proper antenna harness routing within the clamshell assembly.
Wi-Fi antenna leads run along the sides and top of the laptop display bezel via coaxial cabling through the display hinges.
Elevating the antennas to the highest point on the laptop lid minimizes metal chassis shielding and electromagnetic interference.

Anahtar Kavram

Laptop Display Assembly Components and Characteristics
ÖncekiSayfa 15 / 178Sonraki
Tüm alıştırma soruları — CompTIA A+ (Core 1 & Core 2) | Examkin