Examkin

Tüm alıştırma soruları

423 soru

Tüm türler3,551Çoktan seçmeli1,809Çoklu seçim786Sayısal12Eşleştirme521Sıralama423
Soru 421Soru →

A network technician is configuring confidential document printing for an executive's workstation connected to a corporate multifunction device (MFD). Company policy requires print jobs to be retained in printer memory until the user physically authenticates at the printer console. Arrange the driver configuration and job release steps in the correct sequence from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence is: (1) Open the Printing Preferences interface for the installed MFD driver on the workstation, (2) Change the Job Type setting from Normal Print to Locked Print or Secure Print, (3) Enter a unique User ID and assign a 4-digit passcode PIN within the driver configuration dialog, (4) Print the document from the workstation application to transmit the job to the MFD hold queue, and (5) Select the print job at the physical MFD touch panel and enter the assigned PIN to release the pages.
Secured or Locked Printing requires configuring the workstation driver first. The technician must open Printing Preferences, change the Job Type to Locked/Secure Print, set a User ID and PIN, send the job to the MFD queue, and finally enter the matching PIN on the physical MFD touchscreen to release the paper output.

Adım Adım Çözüm

1
Access driver preferences
Driver configuration interface opens on the client workstation
Print options must be modified at the driver level prior to submitting print requests.
2
Select Locked/Secure Print job type
Authentication credential fields become configurable
Changing the mode from default Normal Print instructs the MFD to hold the job in internal memory/storage.
3
Define User ID and PIN
Job metadata is tagged with authentication credentials
The MFD requires matching credentials to identify and secure the specific user's print job.
4
Transmit the print job
Print job is spooled and stored in the MFD queue
The file must be present in device memory before a user can physically release it.
5
Authenticate at MFD console
Confidential paper output is printed
Entering the matching PIN at the physical device console releases the held job from storage to the output tray.

Anahtar Kavram

Multifunction device (MFD) Locked Print / Secure Print job release workflow
Soru 422Soru →

A technician is setting up a new wireless multifunction device (MFD) in a small office environment. Which of the following sequence of steps correctly configures the MFD on the local wireless network and connects it to a user workstation?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence for configuring a wireless network printer is: First, access the wireless setup wizard on the printer's front panel interface. Second, select the target Wi-Fi SSID and enter the security key to establish connection. Third, print a network configuration page to confirm IP address assignment. Fourth, add the printer on the workstation using its IP address. Fifth, install the correct manufacturer print driver when prompted by the operating system.
The correct deployment order requires connecting the physical printer hardware to the wireless network first (initiating setup via front panel, authenticating with SSID/key), confirming network connection parameters (printing a status page for the IP address), and finally configuring the workstation end (adding the device by IP address and loading the appropriate print driver).

Adım Adım Çözüm

1
Initiate wireless network setup at the printer control panel.
The printer displays available wireless networks.
Before a workstation can discover the device, the printer must first be configured on the physical network.
2
Authenticate the printer onto the wireless network using the correct SSID and passphrase.
The printer connects to the wireless access point.
Wireless security authentication is mandatory for network access.
3
Print a network configuration test page from the printer control panel.
The assigned IP address and network status are verified.
Verifying the IP address ensures the printer is reachable on the local subnet.
4
Add the network printer on the workstation using the confirmed IP address.
The workstation connects to the printer across the IP network.
Specifying the direct IP address ensures reliable communication between the client operating system and the hardware.
5
Install the manufacturer-supplied print driver.
Full printing capabilities and device features are enabled on the workstation.
Appropriate drivers translate print commands into printer-understandable page description languages like PCL or PostScript.

Anahtar Kavram

Wireless Network Printer Setup and Configuration Sequence
Soru 423Soru →

A network technician is configuring a newly deployed multifunction device (MFD) to enable the Scan to Network Folder (SMB) feature using Active Directory service credentials in an enterprise environment. In what order should the technician execute the steps below to configure the device settings and verify end-to-end functionality?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence for configuring Scan to SMB is: 1) Authenticate to the MFD Embedded Web Server (EWS) over HTTPS, 2) Configure TCP/IP and DNS settings for domain resolution, 3) Define the SMB UNC network path and version settings, 4) Input the Active Directory service account credentials, and 5) Execute a test scan from the MFD panel.
The procedure begins by gaining administrative access via the Embedded Web Server (EWS). Next, underlying network and DNS configurations are established so the MFD can resolve server names on the network. Then, the SMB destination UNC path is specified, followed by assigning the Active Directory service account credentials that possess authorization to write to that share. Finally, a test scan is performed to verify that network connectivity, authentication, and file creation succeed.

Adım Adım Çözüm

1
Access the device Embedded Web Server (EWS) via HTTPS and log in as an administrator.
Administrative privileges are granted to modify hardware, network, and digital sending settings.
Security controls block network feature modification until authenticated.
2
Set IP address parameters, subnet mask, default gateway, and primary/secondary DNS servers.
The MFD can resolve target server hostnames and route traffic across subnets.
UNC paths using domain names require functional DNS resolution before SMB connections can establish.
3
Navigate to the digital sending/scan settings and input the destination UNC path (\\server\share).
The target directory for scanned documents is designated.
The system must know the file destination format before applying authentication credentials.
4
Configure the Active Directory domain service account credentials (username, password, domain).
The MFD stores the credential set to authenticate write actions to the SMB share.
SMB network shares enforce access control lists (ACLs) requiring valid network authentication.
5
Initiate a test scan directly from the MFD control panel to the configured destination.
Confirmation that the file is created in the network folder without permission or network errors.
Verifies that all preceding steps operate together correctly under realistic usage conditions.

Anahtar Kavram

MFD Scan to Network Folder (SMB) Configuration Workflow
ÖncekiSayfa 22 / 22
Tüm alıştırma soruları — CompTIA A+ (Core 1 & Core 2) | Examkin