Examkin

Soru

Zorluk: OrtaErrors in Measurement and Significant Figures

The length and width of a rectangular metal sheet are measured as (8.0±0.2) cm(8.0 \pm 0.2)\text{ cm} and (5.0±0.1) cm(5.0 \pm 0.1)\text{ cm}, respectively. What is the percentage error in the calculated area of the metal sheet?

Cevap: 4.5 %

Cevap

The percentage error in the calculated area of the metal sheet is 4.5%4.5\%.
For a calculated quantity involving multiplication (A=L×WA = L \times W), the total relative error is the sum of the relative errors of the individual measurements. The fractional error in length is 0.28.0=0.025\frac{0.2}{8.0} = 0.025 (2.5%2.5\%) and in width is 0.15.0=0.020\frac{0.1}{5.0} = 0.020 (2.0%2.0\%). Summing these gives 0.0450.045, which is equivalent to 4.5%4.5\%.

Adım Adım Çözüm

1
Determine the fractional error in the length measurement
0.2 cm8.0 cm=0.025\frac{0.2\text{ cm}}{8.0\text{ cm}} = 0.025
Fractional error is given by the ratio of absolute error to the measured value.
2
Determine the fractional error in the width measurement
0.1 cm5.0 cm=0.020\frac{0.1\text{ cm}}{5.0\text{ cm}} = 0.020
Fractional error is calculated as the absolute uncertainty divided by the measured dimension.
3
Combine the fractional errors for the calculated area
\frac{\Delta A}{A} = 0.025 + 0.020 = 0.045
For quantities multiplied together (A=L×WA = L \times W), individual fractional errors sum to give the total fractional error.
4
Convert the fractional error to percentage error
0.045×100%=4.5%0.045 \times 100\% = 4.5\%
Multiplying the relative error by 100 yields the percentage error.

Anahtar Kavram

Error Propagation in Products
Bu soruyu puanla

Konular

Errors in Measurement and Significant Figures

Bu konudan daha fazla soru