Examkin

Soru

Zorluk: OrtaLatent Heat and Changes of State

A solid sample of mass 0.25 kg0.25\text{ kg} at its melting point is completely melted by an electric heater rated at 700 W700\text{ W}. If the specific latent heat of fusion of the substance is 3.36×105 J kg−13.36 \times 10^5\text{ J kg}^{-1}, what is the time taken to melt the sample completely at a constant temperature?

  1. 120 s120\text{ s}Cevap
  2. B
    420 s420\text{ s}
  3. C
    210 s210\text{ s}
  4. D
    1200 s1200\text{ s}

Cevap

The time taken to completely melt the block is 120 s120\text{ s}.
The thermal energy required to melt a substance at its melting point depends solely on its mass and specific latent heat of fusion (Q=mLfQ = m L_f). Calculating Q=0.25 kg×3.36×105 J kg−1=84,000 JQ = 0.25\text{ kg} \times 3.36 \times 10^5\text{ J kg}^{-1} = 84,000\text{ J} and dividing by heater power 700 W700\text{ W} yields exactly 120 s120\text{ s}.

Adım Adım Çözüm

1
Calculate the total thermal energy required for phase change.
Q=mLf=0.25 kg×3.36×105 J kg−1=84,000 JQ = m L_f = 0.25\text{ kg} \times 3.36 \times 10^5\text{ J kg}^{-1} = 84,000\text{ J}
During a change of state at constant temperature, thermal energy is given by Q=mLfQ = m L_f.
2
Relate energy supplied by the electrical heater to time using power formula.
Q=P×t  ⟹  t=QPQ = P \times t \implies t = \frac{Q}{P}
Power is the rate of energy transfer per unit time (P=QtP = \frac{Q}{t}).
3
Substitute the energy and power values to solve for time tt.
t=84,000 J700 W=120 st = \frac{84,000\text{ J}}{700\text{ W}} = 120\text{ s}
Dividing total energy required by power gives time in seconds.

Anahtar Kavram

Latent Heat of Fusion and Electrical Thermal Energy
Bu soruyu puanla

Konular

Latent Heat and Changes of State

Bu konudan daha fazla soru