Examkin

Soru

Zorluk: Çok zorAlternating Current (AC) Circuits

An alternating current (AC) series circuit contains a resistor of resistance R=30 ΩR = 30\ \Omega, an inductor of inductive reactance XL=80 ΩX_L = 80\ \Omega, and a capacitor of capacitive reactance XC=40 ΩX_C = 40\ \Omega. The circuit is connected across an AC supply with a peak voltage of V0=1002 VV_0 = 100\sqrt{2}\text{ V}. What is the average power dissipated in the circuit?

  1. 120 W120\text{ W}Cevap
  2. B
    240 W240\text{ W}
  3. C
    13.3 W13.3\text{ W}
  4. D
    400 W400\text{ W}

Cevap

The average electrical power dissipated in the circuit is 120 W120\text{ W}.
The average power dissipated in an AC series circuit depends solely on the resistive component. First, converting peak voltage V0=1002 VV_0 = 100\sqrt{2}\text{ V} yields an RMS voltage of Vrms=100 VV_{\text{rms}} = 100\text{ V}. Computing the circuit impedance yields Z=302+(80−40)2=50 ΩZ = \sqrt{30^2 + (80 - 40)^2} = 50\ \Omega. This produces an RMS current of Irms=10050=2 AI_{\text{rms}} = \frac{100}{50} = 2\text{ A}. Finally, substituting into Pavg=Irms2RP_{\text{avg}} = I_{\text{rms}}^2 R gives (2)2×30=120 W(2)^2 \times 30 = 120\text{ W}.

Adım Adım Çözüm

1
Calculate the root-mean-square (RMS) voltage of the AC supply.
Vrms=V02=10022=100 VV_{\text{rms}} = \frac{V_0}{\sqrt{2}} = \frac{100\sqrt{2}}{\sqrt{2}} = 100\text{ V}
AC power calculations require RMS voltage values rather than peak voltage values.
2
Calculate the net impedance (ZZ) of the series RLC circuit.
Z=R2+(XL−XC)2=302+(80−40)2=302+402=2500=50 ΩZ = \sqrt{R^2 + (X_L - X_C)^2} = \sqrt{30^2 + (80 - 40)^2} = \sqrt{30^2 + 40^2} = \sqrt{2500} = 50\ \Omega
Resistance and reactances combine quadratically due to phase differences between voltage across components.
3
Calculate the RMS current (IrmsI_{\text{rms}}) flowing through the circuit.
Irms=VrmsZ=100 V50 Ω=2 AI_{\text{rms}} = \frac{V_{\text{rms}}}{Z} = \frac{100\text{ V}}{50\ \Omega} = 2\text{ A}
Ohm's law for AC circuits states Irms=VrmsZI_{\text{rms}} = \frac{V_{\text{rms}}}{Z}.
4
Calculate the average power dissipated in the circuit.
Pavg=Irms2R=(2 A)2×30 Ω=120 WP_{\text{avg}} = I_{\text{rms}}^2 R = (2\text{ A})^2 \times 30\ \Omega = 120\text{ W}
Power is dissipated only in resistive elements, as pure inductors and capacitors store and return energy without net loss.

Anahtar Kavram

Impedance and Power in Series AC Circuits
Bu soruyu puanla

Konular

Alternating Current (AC) Circuits

Bu konudan daha fazla soru