Examkin

Road and Traffic Signs

126 soru

Tüm türler126Çoktan seçmeli54Doğru / Yanlış26Eşleştirme42Sıralama4
Soru 1Soru →

You are approaching a zebra crossing that has white zig-zag road markings painted on both approaches. What action is strictly prohibited within the area covered by these zig-zag lines?

Cevabı ve açıklamayı göster

Cevap: Overtaking the moving vehicle nearest to the crossing or parking your vehicle

Cevap

Overtaking the moving vehicle nearest to the crossing or parking your vehicle is strictly prohibited within white zig-zag road markings.
Under UK Highway Code Rule 191, you must not park or wait on white zig-zag lines, nor overtake the moving vehicle nearest to the crossing or any vehicle that has stopped to give way to pedestrians.

Adım Adım Çözüm

1
Identify the specific road marking and its legal purpose.
The markings are white zig-zag lines located on the approaches to and exits from pedestrian crossings.
Zig-zag markings are installed to maintain a clear line of sight between approaching drivers and pedestrians waiting to cross.
2
Apply the statutory restrictions set out in UK Highway Code Rule 191.
Drivers must not park, wait, or overtake the leading vehicle within the zig-zag area.
Parking obscures waiting pedestrians from view, and overtaking near a crossing drastically elevates the risk of hitting a pedestrian who has stepped onto the road.

Anahtar Kavram

Highway Code restrictions on pedestrian crossing zig-zag markings
Tahmini Süre:45s
Soru 2Soru →

At a busy signal-controlled crossroads, yellow criss-cross lines are painted on the carriageway to form a box junction. Under the UK Highway Code, in which of the following circumstances are you legally permitted to enter and wait within the box junction?

Cevabı ve açıklamayı göster

Cevap: When turning right and your exit lane is clear, but you are prevented from completing the manoeuvre by oncoming traffic or vehicles ahead waiting to turn right

Cevap

You are permitted to enter the box junction and wait when you want to turn right and your exit road is clear, but you are prevented from completing the turn by oncoming traffic or other vehicles waiting to turn right.
According to Rule 174 of the UK Highway Code, you MUST NOT enter a box junction unless your exit road or lane is clear. The only legal exception is when you wish to turn right and your exit road is clear, but you are prevented from completing the manoeuvre solely by oncoming traffic or by other vehicles ahead of you waiting to turn right.

Adım Adım Çözüm

1
Identify the marking and the primary regulatory rule
Criss-cross yellow lines denote a box junction governed by Rule 174 of the UK Highway Code, which establishes that drivers must not enter unless their exit lane is clear.
Establishing the fundamental restriction prevents entering on green lights when the exit is blocked.
2
Evaluate the statutory exception for right turns
Rule 174 contains an explicit exception allowing drivers to enter the box and wait if turning right, provided their exit road is clear and they are only held up by oncoming traffic or other right-turning vehicles.
This exception keeps traffic flowing smoothly without penalising right-turning drivers who must wait for oncoming gaps.
3
Select the option that matches the exact legal exception
The statement describing entering to turn right with a clear exit while waiting for oncoming traffic or other right-turning vehicles is the only legally compliant condition.
All other scenarios breach the requirement of having a clear exit before entering.

Anahtar Kavram

Highway Code Rule 174: Box Junction Rules and Right-Turn Exceptions
Soru 3Soru →

Road markings provide essential instructions and warnings regarding right of way, junction priority, and upcoming hazards. Match each road marking description with its correct legal meaning under The Highway Code.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Transverse double broken white lines painted across the road at a junction mouth
A transverse single continuous solid white line painted across the carriageway
A longitudinal broken centre line where the painted marks are significantly longer than the gaps
A longitudinal broken centre line where the painted marks are short and the gaps are long

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Transverse double broken white lines match with 'Give way to traffic on the major road before joining or crossing'; Transverse single continuous solid white line matches with 'Mandatory stop before entering the junction when controlled by a stop sign or signals'; Longitudinal broken line with long marks and short gaps matches with 'Hazard warning line indicating an approaching hazard, sharp bend, or junction ahead'; Longitudinal broken line with short marks and long gaps matches with 'Standard lane or centre line dividing traffic on open roads with no immediate hazard'.
According to The Highway Code, transverse markings running across the carriageway dictate junction protocol: double broken lines require yielding priority to cross-traffic at a Give Way junction, while a single solid transverse line requires a complete halt at a Stop line. Longitudinal markings running along the carriageway indicate hazard levels: lines with short marks and long gaps act as standard lane dividers, whereas lines with long marks and short gaps warn of an upcoming hazard, bend, or junction.

Adım Adım Çözüm

1
Analyze the transverse road markings that run across the carriageway.
Double broken lines signify a Give Way requirement, whereas a single solid continuous line mandates a complete stop.
Transverse road markings control right of way and junction entry conditions.
2
Examine the ratio of line length to gap length for longitudinal broken lines.
Longer marks with short gaps indicate a hazard warning line, whereas short marks with long gaps represent a standard centre or lane dividing line.
Line spacing visually communicates the level of upcoming road risk and driving caution required.
3
Pair each physical line description with its corresponding regulatory purpose under The Highway Code.
All four road markings are paired with their unambiguous legal definitions.
Ensures full compliance with UK road marking regulations.

Anahtar Kavram

UK Highway Code rules on transverse priority lines and longitudinal line spacing patterns
Tahmini Süre:1m 15s
Soru 4Soru →

You are following a vehicle on a single-carriageway road. The driver extends their right arm out of the side window, with the palm facing downwards, and moves it slowly up and down. What does this signal indicate that the driver intends to do?

Cevabı ve açıklamayı göster

Cevap: Slow down or come to a stop

Cevap

The driver intends to slow down or come to a stop.
According to the UK Highway Code, a driver signals an intention to slow down or stop by extending their right arm outside the window with the palm facing downwards and waving it steadily up and down. Following drivers should respond by easing off the accelerator, checking their mirrors, and preparing to brake.

Adım Adım Çözüm

1
Identify the physical hand and arm gesture described in the scenario.
The driver is extending their right arm with the palm downwards and moving it vertically up and down.
The Highway Code defines distinct arm movements for turning left, turning right, and slowing down or stopping.
2
Match the observed motion to the official UK Highway Code arm signal rules.
The up-and-down movement with the palm down explicitly signifies 'I intend to slow down or stop'.
This physical signal provides advance warning to following traffic when electric brake lights may be hidden, failing, or used to reinforce braking intentions.

Anahtar Kavram

Recognising official Highway Code arm signals used by drivers and other road users.
Tahmini Süre:45s
Soru 5Soru →

While driving along an urban street, you notice a single continuous yellow line painted along the edge of the carriageway next to the kerb. What does this road marking indicate to drivers?

Cevabı ve açıklamayı göster

Cevap: Waiting restrictions are in force during specific times shown on nearby signs

Cevap

Waiting restrictions are in force during specific times shown on nearby signs
A single continuous yellow line along the edge of the carriageway indicates that waiting restrictions apply during specified periods. Drivers must consult the nearby upright sign plates to check the exact hours and days during which parking or waiting is prohibited.

Adım Adım Çözüm

1
Identify the marking located along the edge of the road.
Recognised the marking as a single continuous yellow line.
Road edge markings have distinct legal meanings under Highway Code regulations.
2
Determine the regulatory scope and operational conditions of the single yellow line.
Identified that waiting restrictions are active during the specific hours displayed on local roadside time plates.
A single yellow line does not mean a 24/7 prohibition; its operating times are governed by accompanying signage.

Anahtar Kavram

Single yellow road edge lines and timed waiting restrictions
Tahmini Süre:1m 0s
Soru 6Soru →

You are waiting behind the stop line at a railway level crossing controlled by traffic light signals. A train has just passed, but the twin red lights continue to flash alternately. What must you do in this situation?

Cevabı ve açıklamayı göster

Cevap: Remain stationary behind the stop line until the red lights extinguish completely

Cevap

Remain stationary behind the stop line until the red lights extinguish completely.
Under the UK Highway Code, twin alternating flashing red lights mean you MUST stop behind the stop line. If the red lights keep flashing after a train has passed, you must continue to wait because another train may be approaching from either direction.

Adım Adım Çözüm

1
Identify the signal aspect and its legal status under the Highway Code
Twin alternating flashing red lights mean an absolute legal requirement to stop and remain stopped behind the stop line.
Traffic light signals displaying flashing red lights at level crossings, lifting bridges, or fire stations prohibit any vehicle movement past the stop line.
2
Evaluate the ongoing hazard despite the departure of the first train
Recognise that multi-track crossings frequently have subsequent or opposing trains approaching immediately after the first.
The signals remain active automatically until the entire crossing and tracking block are verified safe and clear.
3
Determine the required driver compliance
Stay stationary behind the stop line until the red lights go out and the barriers fully rise (where present).
Proceeding before the signals extinguish is a serious legal violation and carries catastrophic collision risk.

Anahtar Kavram

Legal compliance with twin alternating flashing red light signals at level crossings and emergency installations.
Tahmini Süre:1m 0s
Soru 7Soru →

Match each UK information or direction sign feature to its correct purpose or meaning.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Solid yellow geometric symbol (such as a square, triangle, diamond, or circle)
The letter 'R' shown on a directional route sign
A sign displaying a white letter 'P' alongside a bus graphic
A brown rectangular sign featuring a white castle or windmill symbol

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Yellow geometric symbols guide drivers along emergency diversion routes; the letter 'R' indicates a ring road; a 'P' with a bus graphic marks a park-and-ride facility; and a brown sign with a white symbol directs to a tourist or leisure attraction.
Each feature corresponds to its standardized Highway Code purpose: yellow geometric shapes designate emergency diversion routes during unexpected road closures, the letter 'R' denotes a ring road, the 'P' symbol with a bus graphic indicates a park-and-ride car park, and a brown background with white symbols denotes tourist destinations and cultural attractions.

Adım Adım Çözüm

1
Examine each sign feature and its standard Highway Code visual designation
Identified the specific meaning of emergency diversion shapes, the ring road 'R' indicator, the park-and-ride transit symbol, and the brown tourist background
UK direction and information signs use standardized symbols, colours, and letters to communicate clear navigation instructions quickly
2
Pair each directional symbol with its corresponding function and purpose
Correctly matched all four pairs according to official UK traffic sign conventions
Allows drivers to anticipate route changes, services, and diversions safely and effectively

Anahtar Kavram

UK Direction and Information Sign Symbols
Tahmini Süre:45s
Soru 8Soru →

You enter a signal-controlled crossroads on a green light with the intention of turning right, positioning your vehicle in the centre of the junction. Before you can complete the manoeuvre, a continuous stream of oncoming traffic holds you up, and the traffic lights change to red. What should you do?

Cevabı ve açıklamayı göster

Cevap: Complete the right turn safely as soon as the oncoming traffic comes to a stop for the red light.

Cevap

Complete the right turn safely as soon as the oncoming traffic comes to a stop for the red light.
When you have legally crossed the stop line on a green light to turn right, you are already committed to the junction. If oncoming vehicles prevent you from turning immediately, you should wait until the oncoming traffic stops (which occurs when the lights turn amber and red) and then safely complete your turn to clear the junction.

Adım Adım Çözüm

1
Assess your vehicle's physical position relative to the junction stop line.
Confirm that the vehicle has already crossed the stop line legitimately during the green phase.
Traffic signal stop lines mark the legal threshold; once crossed legally, the driver is committed to the junction.
2
Observe oncoming traffic as the signal aspects cycle to amber and red.
Identify when oncoming vehicles decelerate and stop behind their respective stop line.
Turning across oncoming traffic while they still have momentum creates a high collision risk.
3
Check the exit road and complete the turn to vacate the intersection before cross traffic proceeds.
The intersection is cleared smoothly, preventing gridlock.
The UK Highway Code requires drivers who have advanced into an intersection to clear it promptly once conflicting traffic ceases.

Anahtar Kavram

Junction clearance rules and legal obligations after crossing a stop line on a green signal aspect.
Tahmini Süre:1m 0s
Soru 9Soru →

Match the specific physical signals given by authorised persons (police officers and school crossing patrols) to their precise meaning or required driver action.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Police officer: Left arm extended horizontally to the side with palm facing forward
Police officer: Right arm raised vertically upward with palm facing forward
School crossing patrol: Circular sign held upside down, pointing towards the ground
School crossing patrol: Circular sign held horizontally across their body as a barrier

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Left arm extended horizontally matches stopping traffic from behind. Right arm raised vertically matches stopping traffic from the front. Sign held upside down matches the patrol not being ready. Sign held horizontally matches blocking pedestrians from the road.
The correct matches reflect the exact rules in the Highway Code for signals by authorised persons. Police use a left arm horizontal signal for rear traffic and a right arm vertical signal for front traffic. School crossing patrols use an upside-down sign to show they are not ready, and a horizontal sign to act as a physical barrier against eager pedestrians.

Adım Adım Çözüm

1
Identify the meanings of the police officer's directional arm signals.
The left arm extended horizontally stops traffic from behind, while the right arm raised vertically stops traffic from the front.
Police officers use distinct arm positions to safely direct different streams of traffic without ambiguity.
2
Identify the meanings of the school crossing patrol's non-stopping sign orientations.
An upside-down sign indicates the patrol is not ready, and a horizontal sign is used as a physical barrier for pedestrians.
School crossing patrols use different orientations of their 'STOP' sign to manage pedestrians before they require vehicle traffic to halt.

Anahtar Kavram

Understanding the precise, non-verbal physical signals used by authorised persons to control traffic and pedestrians.
Soru 10Soru →

Match each vehicle or road user signal to its correct official meaning under the UK Highway Code.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Flashing headlights from an approaching vehicle
White lights illuminated at the rear of a vehicle
A cyclist extending their right arm straight out horizontally
Hazard warning lights switched on briefly by a vehicle on a motorway

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Flashing headlights matches 'Alerting other road users of their presence'; White rear lights match 'Showing that the vehicle is reversing or intending to reverse'; Cyclist right arm horizontal matches 'Signalling an intention to turn right'; Motorway hazard warning lights match 'Warning following traffic of a sudden obstruction or sharp slowdown ahead'.
Each signal defined in the Highway Code conveys a specific, standardised message: flashing headlights alert road users to a vehicle's presence, white rear lights show reversing activity, a horizontal right arm indicates a right turn, and brief hazard light usage on motorways warns of sudden deceleration ahead.

Adım Adım Çözüm

1
Identify the official purpose of flashing headlights under Highway Code Rule 110.
Headlight flashes only serve to alert other road users of a vehicle's presence.
They must never be used to intimidate or invite other drivers to proceed.
2
Identify the purpose of rear white lights on a motor vehicle.
White lights at the rear indicate reversing gear is engaged.
This warns pedestrians and following drivers that the vehicle may move backwards.
3
Interpret the cyclist's physical hand signal.
An arm held straight out to the right indicates an upcoming right turn.
Standard arm signals provide clear directional intention where indicators are absent or need reinforcement.
4
Determine why hazard lights are briefly used by moving vehicles on high-speed roads.
They warn following drivers of rapid deceleration or stationary traffic ahead.
Highway Code Rule 116 permits brief hazard light usage to prevent rear-end collisions in sudden motorway queues.

Anahtar Kavram

Signals by Other Road Users
Tahmini Süre:45s
Soru 11Soru →

Different painted road and kerb markings convey specific legal restrictions regarding stopping, waiting, and loading. Which regulatory rule corresponds to each road marking? Match each road marking to its correct legal meaning under the UK Highway Code.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Double yellow lines along the edge of the carriageway
Single yellow line along the edge of the carriageway
Two short yellow stripes marked across the kerb
White zig-zag lines marked near a pedestrian crossing

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Double yellow lines match with no waiting at all times; single yellow lines match with waiting restrictions during times shown on plates; two yellow kerb stripes match with no loading at any time; and white zig-zag lines match with the strict prohibition on stopping, parking, and overtaking near pedestrian crossings.
Under the UK Highway Code, double yellow lines indicate no waiting at any time. A single yellow line indicates that waiting is restricted during the hours shown on accompanying roadside signs. Two short yellow stripes painted on the kerb designate a complete prohibition on loading and unloading at all times. White zig-zag lines situated either side of pedestrian crossings prohibit all stopping, parking, and overtaking the leading moving vehicle.

Adım Adım Çözüm

1
Identify the meaning of double yellow edge lines.
Matched with waiting prohibited at all times.
The UK Highway Code states that double yellow lines mean no waiting at any time unless specific seasonal plates indicate otherwise.
2
Identify the meaning of single yellow edge lines.
Matched with waiting restricted during specified hours on nearby signs.
Single yellow lines require an accompanying upright sign showing the operational hours during which waiting is prohibited.
3
Identify the meaning of two short yellow stripes on the kerb.
Matched with loading and unloading prohibited at all times.
Kerb markings specifically denote loading restrictions; a pair of stripes indicates a 24/7 prohibition on loading and unloading.
4
Identify the meaning of white zig-zag markings near crossings.
Matched with prohibitions on parking, waiting, and overtaking.
Zig-zag markings are installed to protect pedestrian crossing visibility by preventing stopping, waiting, and overtaking.

Anahtar Kavram

UK Highway Code regulations governing carriageway edge markings, kerb markings, and pedestrian crossing road markings.
Tahmini Süre:45s
Soru 12Soru →

You are driving along a single carriageway road and encounter a section marked with central white diagonal stripes (hatched markings) bordered on both sides by continuous solid white lines. Under which circumstance does the UK Highway Code permit you to cross or enter this hatched area?

Cevabı ve açıklamayı göster

Cevap: Only in an emergency situation

Cevap

You are only permitted to enter the hatched area in an emergency situation.
According to Rule 130 of the UK Highway Code, areas of white diagonal stripes bounded by a continuous solid white line carry a strict mandatory prohibition: drivers MUST NOT enter the marked area except in an emergency.

Adım Adım Çözüm

1
Identify the type of road marking and boundary line style described.
The road feature is a hatched marking (diagonal white stripes) bounded by continuous solid white lines.
The boundary line style (solid vs broken) determines whether a road marking conveys a legal prohibition (MUST NOT) or guidance (should not).
2
Apply Highway Code Rule 130 regarding diagonal hatched markings.
Rule 130 explicitly states that if the hatched area is bounded by a continuous solid white line, you MUST NOT enter it except in an emergency.
Solid border lines denote absolute statutory prohibitions to prevent dangerous head-on collisions and protect road infrastructure.
3
Differentiate from other line regulations.
Exceptions allowing overtaking of slow vehicles (under 10 mph) apply to standard double white lines (Rule 129), not solid-bordered hatched areas.
Ensures precise legal distinction between different carriageway markings.

Anahtar Kavram

Highway Code Rule 130: Regulations on Hatched Markings and Chevron Areas
Tahmini Süre:1m 0s
Soru 13Soru →

You are driving on a multi-lane road where traffic flow is managed by overhead gantry signals. The signal directly above your lane displays a steady diagonal amber arrow pointing downwards to the left. What action should you take?

Cevabı ve açıklamayı göster

Cevap: Move safely into the lane to your left as soon as it is clear to do so

Cevap

Move safely into the lane to your left as soon as it is clear to do so
According to the UK Highway Code (Rule 177 on lane control signals), an illuminated diagonal arrow pointing downwards indicates that your lane is closed ahead or traffic is being directed away from that lane. You must change lanes in the direction shown by the arrow as soon as it is safe to do so.

Adım Adım Çözüm

1
Identify the type and meaning of the overhead lane control signal
Recognise that a downward diagonal amber arrow indicates that the current lane is closing ahead or obstructed.
Overhead lane control signals give early warning of mandatory closures and lane direction changes.
2
Determine the required driving manoeuvre under the UK Highway Code
Prepare to change lanes in the direction indicated by the arrow (to the left).
Drivers must move out of the indicated lane before it terminates or displays a red cross.
3
Execute the manoeuvre safely using standard observation routines
Check mirrors, signal if necessary, and merge smoothly into the adjacent left lane when a safe gap appears.
Lane changes must always be completed safely without causing other vehicles to brake or swerve.

Anahtar Kavram

Overhead gantry lane control signals and mandatory lane clearance
Tahmini Süre:45s
Soru 14Soru →

Observing and correctly interpreting signals given by other motorists and road users is essential for safe driving. How does each observed signal correspond to its official meaning under the UK Highway Code? Match each signal with its correct regulatory meaning.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

An arm extended horizontally and moved steadily up and down with the palm facing downwards
Hazard warning lights operating on a stationary vehicle at the side of a carriageway
Headlights flashed briefly by an oncoming vehicle as you approach a narrow section of road
A flashing amber beacon illuminated on the roof of a vehicle travelling on the road

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Arm moving up and down matches intention to slow down or stop; hazard lights on a stationary vehicle matches broken down or temporary obstruction; flashed headlights matches alerting presence only; flashing amber beacon matches slow-moving or maintenance vehicle.
Each signal corresponds to its official regulatory function: extending an arm and moving it up and down with the palm downwards signals deceleration or stopping; stationary hazard warning lights alert others to a broken-down vehicle or temporary obstruction (Rule 116); flashing headlights serve strictly to warn other road users of a vehicle's presence (Rule 110); and an amber flashing beacon alerts motorists to a slow-moving or maintenance vehicle (Rule 225).

Adım Adım Çözüm

1
Identify the physical arm signal given by the road user.
An arm extended and waved up and down with palm downwards represents slowing down or stopping.
Highway Code arm signals define vertical palm-down waving as deceleration or stopping.
2
Interpret the illuminated light signals displayed by stationary and moving vehicles.
Hazard warning lights on a stopped vehicle signal an obstruction/breakdown; flashing headlights signal driver presence only under Rule 110.
Light signals convey specific statuses: hazard flashers show obstruction, and headlight flashes indicate presence rather than priority.
3
Identify the purpose of the special vehicle warning beacon.
A flashing amber beacon indicates a slow-moving vehicle or highway maintenance.
Amber warning beacons are legally designated to alert motorists to slow-moving or specialized service vehicles.

Anahtar Kavram

Interpretation and official meanings of vehicle indicators, warning lights, beacons, and road user hand signals under the UK Highway Code.
Tahmini Süre:1m 0s
Soru 15Soru →

Road markings communicate vital legal rules, warnings, and priority instructions on UK roads. Which regulatory meaning and required driver action correctly matches each road marking?

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Curved white arrow pointing towards the left painted in a lane
Area marked with white chevrons bounded by continuous solid white lines
White letters spelling 'KEEP CLEAR' painted across a lane
Single solid red line painted along the kerb or edge of the road

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

The curved arrow matches the advice to return to the left lane; the chevrons bounded by solid lines match the prohibition on entry except in an emergency; the 'KEEP CLEAR' text matches leaving a gap to prevent blocking a junction; and the single red line matches no stopping, parking, or loading during operational hours on a red route.
Each road marking has a specific legal meaning under the Highway Code: curved arrows instruct drivers to complete manoeuvres and return left; solid-bordered chevrons strictly forbid entry except in emergencies; 'KEEP CLEAR' markings prevent gridlock across key intersections; and single red lines enforce timed clearway restrictions on designated red routes.

Adım Adım Çözüm

1
Identify the purpose of carriageway deflection arrows
Recognise that a curved arrow instructs overtaking drivers to move back into the left lane before reaching a solid line or hazard
Deflection arrows warn of imminent road layout restrictions or hazards ahead
2
Determine the legal status of chevron markings with solid borders
Identify that a continuous solid border creates an absolute prohibition against entering the chevron area, permissible only in an emergency
Highway Code Rule 130 distinguishes solid borders (mandatory prohibition) from broken borders (entry allowed if safe and necessary)
3
Interpret the 'KEEP CLEAR' road marking
Match the marking with keeping junction access unobstructed when traffic queues
'KEEP CLEAR' painted across a lane ensures vital turning spaces and entrances remain accessible during traffic congestion
4
Interpret red route edge markings
Match the single red line with strict prohibitions on stopping, parking, and loading during controlled hours
Red routes enforce stopping restrictions to maintain unimpeded traffic flow on major arterial roads

Anahtar Kavram

Interpretation and legal compliance for regulatory, warning, and informational road markings under the UK Highway Code.
Tahmini Süre:1m 15s
Soru 16Soru →

You are approaching a zebra crossing that has white zig-zag lines painted on the road on both approaches. Which rule applies when driving within this marked area?

Cevabı ve açıklamayı göster

Cevap: You must not park on the markings or overtake the leading moving vehicle

Cevap

You must not park on the markings or overtake the leading moving vehicle within the white zig-zag area.
According to the UK Highway Code (Rule 191), the white zig-zag markings on the approaches to and exits from pedestrian crossings establish a strict safety zone. Drivers must not park, wait, or overtake the leading moving vehicle within these markings, ensuring that pedestrians and approaching traffic have an unobstructed view of each other.

Adım Adım Çözüm

1
Identify the specific road marking and its location
White zig-zag markings painted on the approaches to and exits from a pedestrian crossing.
These markings are governed by strict statutory rules under the UK Highway Code (Rule 191).
2
Determine the dual legal restrictions imposed by zig-zag markings
Drivers are strictly prohibited from parking or waiting, and from overtaking the leading moving vehicle.
The restrictions maintain clear sightlines for approaching drivers and pedestrians waiting to cross.

Anahtar Kavram

Regulatory prohibitions of pedestrian crossing white zig-zag markings
Tahmini Süre:45s
Soru 17Soru →

Road users must accurately interpret warning sign symbols to anticipate hazards well in advance. Match each UK warning sign description with the specific hazard condition it alerts drivers to ahead.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

A red triangle containing a black pictogram of a five-bar gate
A red triangle containing a black pictogram of a skidding car with wavy tyre tracks
A red triangle containing a black pictogram of a traffic light housing with three coloured lenses
A red triangle containing a black pictogram of two children walking

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

The gate pictogram matches the level crossing with barrier or gate; the skidding car matches a slippery road surface; the traffic light housing matches traffic signals ahead; and the children walking pictogram matches a school crossing patrol or children near the road.
Each standard UK warning sign uses an intuitive silhouette to convey specific road hazards in advance. The gate represents a gated or barriered railway crossing, the skidding car denotes slippery road conditions, the traffic signal indicates upcoming traffic lights, and the children pictogram alerts drivers to school zones or child pedestrian crossings.

Adım Adım Çözüm

1
Identify the primary symbol depicted within each triangular warning sign.
Recognise the five-bar gate, skidding vehicle, traffic signal unit, and children walking symbols.
Triangular signs with red borders provide hazard warnings, with the internal pictogram specifying the nature of the upcoming risk.
2
Correlate each identified pictogram with its designated Highway Code hazard definition.
Link each unique symbol directly to its corresponding hazard description without confusing similar sign categories.
Accurate hazard identification allows drivers adequate time to adjust speed and increase observation.

Anahtar Kavram

Recognition of standard UK triangular warning sign pictograms and their designated road hazards.
Tahmini Süre:45s
Soru 18Soru →

While travelling on a smart motorway, you see a speed limit of 50 mph displayed inside a red circle on an overhead gantry sign. What does this signal mean?

Cevabı ve açıklamayı göster

Cevap: It is a mandatory speed limit that you must not exceed

Cevap

The speed limit of 50 mph is a mandatory limit that you must not exceed.
Under Highway Code Rule 261, any speed limit displayed inside a red circle on an overhead motorway gantry is mandatory and legally enforceable. Drivers must not exceed this maximum speed limit.

Adım Adım Çözüm

1
Identify the shape and border colour of the overhead sign
The sign is circular with a red ring border displaying the number 50.
In the UK Highway Code, circular signs with a red border convey mandatory prohibitions or orders.
2
Apply the rule for variable speed limits on motorway gantries
The displayed 50 mph represents an enforceable maximum speed limit for all vehicles in that lane.
Highway Code Rule 261 mandates that drivers must not exceed speed limits shown within red circles on motorway signals.

Anahtar Kavram

Mandatory variable speed limits displayed within red circles on motorway gantries
Tahmini Süre:45s
Soru 19Soru →

UK road signs use standardised colour schemes, symbols, and bracket notations to inform drivers about route classifications and roadside facilities. Match each sign feature with its correct function or classification.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

A blue rectangular sign displaying a white letter 'P' and a bus pictogram
A green directional sign with white destination lettering and yellow route numbering
A brown rectangular sign displaying cutlery and bed pictograms
A directional sign displaying a motorway number enclosed in brackets, such as (M1)

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Blue 'P' with bus symbol pairs with park-and-ride facility; Green sign with yellow route numbers pairs with primary route sign; Brown sign with cutlery and bed pairs with tourist meals and accommodation; Motorway number in brackets pairs with a non-motorway road leading to that motorway.
Each feature is correctly matched according to standard UK Highway Code sign design: blue with 'P' and bus indicates a park-and-ride car park; green with white text and yellow route numbers identifies a primary route; brown indicates tourist services including meals and accommodation; and bracketed motorway designations show that the route leads to the specified motorway.

Adım Adım Çözüm

1
Identify the standard UK sign colour conventions and facility symbols
Blue rectangular signs with a 'P' and public transport symbols denote park-and-ride sites, while brown signs denote tourist attractions and amenities (such as meals and lodging).
The Highway Code reserves distinct background colours and pictograms for specific facility types.
2
Differentiate route classification backgrounds and notation rules
Green backgrounds with yellow route numbers indicate primary routes. Brackets around any route identifier (e.g., '(M1)') indicate a connecting road leading towards that route.
Bracketed route numbers prevent confusion between the road currently being navigated and the ultimate major corridor being joined.
3
Match each individual feature to its corresponding function
All four pairs are mapped accurately to their official UK Highway Code definitions.
Ensures complete alignment with standard traffic sign regulations.

Anahtar Kavram

UK Direction and Information Sign Colour Codes and Notations
Tahmini Süre:1m 15s
Soru 20Soru →

While driving along a residential street lined with parked vehicles, you notice white lights illuminated at the rear of a stationary car ahead. What do these lights indicate?

Cevabı ve açıklamayı göster

Cevap: The vehicle is in reverse gear and may begin moving backwards

Cevap

The vehicle is in reverse gear and may begin moving backwards.
White lights displayed at the rear of a vehicle illuminate automatically whenever reverse gear is engaged. This alerts other road users that the vehicle is either actively reversing or preparing to move backwards, requiring approaching drivers to reduce speed, remain alert, and be prepared to stop.

Adım Adım Çözüm

1
Identify the colour and position of the illuminated lights on the observed vehicle
White lights are active specifically at the rear of the car
Vehicle lighting colour coding is standardized under the Highway Code to communicate specific actions.
2
Apply the Highway Code rule for rear white vehicle lights
Determine that reverse gear has been engaged by the driver
White rear lights only activate when the reverse gear is selected, signaling potential rearward travel.
3
Assess the immediate road risk and plan driver response
Anticipate that the vehicle may pull out or reverse into the carriageway and prepare to give way
Drivers reversing often have restricted visibility and require additional space and caution from approaching traffic.

Anahtar Kavram

Vehicle reversing lights and hazard anticipation
Tahmini Süre:1m 0s
Sayfa 1 / 7Sonraki