Safety Margins

158 soru

Soru 121Soru →

If a vehicle begins to understeer on a slippery corner because the front tyres have lost grip, increasing the steering angle will help the front tyres regain adhesion and guide the vehicle around the bend.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false because increasing steering input when front-wheel traction is already lost increases the slip angle, causing the front tyres to scrub across the road surface rather than rolling and gripping. To correct understeer, the driver should smoothly release the accelerator and slightly decrease the steering angle until the front tyres regain grip.

Adım Adım Çözüm

1
Identify the type of loss of traction occurring at the vehicle's front axle.
The scenario describes understeer, where the front tyres exceed their maximum limit of adhesion and slide straight ahead rather than turning.
Correct recovery depends on understanding which axle has lost grip and how tyre slip angles function.
2
Evaluate the mechanical effect of turning the steering wheel further into the bend.
Increasing the steering lock increases tyre scrub and slip angle beyond the limit of friction, reducing available grip even further.
Tyres require grip to direct vehicle travel; over-rotating the front wheels when traction is lost makes steering completely ineffective.
3
Determine the correct recovery procedure.
The driver must smoothly ease off the accelerator to transfer weight forward and slightly ease off the steering angle until the tyres bite and regain grip.
This establishes that the statement proposing to increase the steering angle is incorrect.

Anahtar Kavram

Understeer dynamics and steering recovery techniques
Tahmini Süre:1m 0s
Soru 122Soru →

A car is travelling at 20 mph20\text{ mph} along an ungritted side street covered with packed ice and snow. In normal dry conditions, the average total stopping distance at 20 mph20\text{ mph} is 12 metres12\text{ metres}. According to The Highway Code, stopping distances on icy surfaces can increase by up to ten times (10×10\times). By how many metres does the total stopping distance increase when stopping on ice compared to normal dry conditions at this speed?

Cevabı ve açıklamayı göster

Cevap: 108

Cevap

The total stopping distance increases by 108 metres108\text{ metres}.
According to The Highway Code, stopping distances in icy conditions can be up to ten times longer than on dry roads. At 20 mph20\text{ mph}, the standard dry stopping distance is 12 metres12\text{ metres}, meaning the stopping distance on ice can reach 12 m×10=120 metres12\text{ m} \times 10 = 120\text{ metres}. The increase over dry tarmac is therefore 120 m−12 m=108 metres120\text{ m} - 12\text{ m} = 108\text{ metres} (or 12 m×9=108 m12\text{ m} \times 9 = 108\text{ m}).

Adım Adım Çözüm

1
Calculate the total stopping distance on ice
12 m×10=120 m12\text{ m} \times 10 = 120\text{ m}
The Highway Code states that overall stopping distances can increase by up to ten times on ice and snow.
2
Subtract the dry stopping distance from the icy stopping distance to find the increase
120 m−12 m=108 m120\text{ m} - 12\text{ m} = 108\text{ m}
The question asks for the additional distance (the increase) rather than the total stopping distance on ice.

Anahtar Kavram

Highway Code stopping distance multipliers for ice and snow
Tahmini Süre:1m 0s
Soru 123Soru →

While travelling at 30 mph on a clear, dry road, a driver suddenly spots an unexpected hazard ahead and must perform an emergency stop. Which factor will directly increase the vehicle's thinking distance?

Cevabı ve açıklamayı göster

Cevap: The driver feeling sluggish and fatigued from an illness

Cevap

The driver feeling sluggish and fatigued from an illness
Thinking distance depends strictly on vehicle speed and driver reaction time. Physical conditions such as illness, fatigue, alcohol, or medications slow neural processing and reaction speed, meaning the car travels further before the driver can react and apply the brakes.

Adım Adım Çözüm

1
Define thinking distance and identify what determines it
Thinking distance is the distance travelled between noticing a hazard and applying the footbrake, determined solely by vehicle speed and driver reaction time.
Separating driver reaction factors from vehicle and road factors is essential to evaluate stopping components correctly.
2
Evaluate the effect of driver physical impairment
Tiredness, illness, alcohol, drugs, or distractions lengthen driver reaction time, which directly increases the distance covered before braking begins.
At any given travelling speed, a longer reaction time directly results in a longer thinking distance.
3
Distinguish thinking distance factors from braking distance factors
Road contamination, worn brake pads, and vehicle weight only affect the car after the brakes have been applied.
Mechanical and environmental conditions impact tyre-road friction and deceleration, which belong strictly to braking distance.

Anahtar Kavram

Factors Affecting Thinking Distance
Tahmini Süre:1m 0s
Soru 124Soru →

While descending a steep slope towards a junction, a driver keeps the clutch pedal fully depressed over a prolonged distance to regulate the vehicle's progress. What primary hazard does this specific action introduce regarding vehicle control and stopping performance?

Cevabı ve açıklamayı göster

Cevap: The absence of engine braking places the entire workload on the footbrake, leading to brake overheating and reduced stopping effectiveness.

Cevap

The absence of engine braking places the entire workload on the footbrake, leading to brake overheating and reduced stopping effectiveness.
Holding the clutch down (coasting) separates the engine from the driven wheels, eliminating engine braking. On a downward gradient, gravity causes the car to speed up rapidly, requiring continuous footbrake application. This prolonged friction generates extreme heat, causing brake fade (loss of braking power) and compromising vehicle control when stopping at the junction.

Adım Adım Çözüm

1
Identify the driver's mechanical action and definition
Holding the clutch pedal down while moving constitutes coasting under Highway Code Rule 122.
Coasting disengages the engine flywheel from the gearbox and driving wheels.
2
Analyze vehicle dynamics on a downhill slope during coasting
Engine compression resistance (engine braking) is completely eliminated, permitting gravity to accelerate the vehicle freely.
Without natural engine resistance, the vehicle requires continuous or heavy application of the service footbrake to maintain a safe speed.
3
Determine the safety consequence of prolonged footbrake use
Continuous friction generates excessive thermal energy in the brake pads and discs, causing brake fade and significantly increasing total braking distance.
Excessive heat diminishes the coefficient of friction between braking surfaces, degrading stopping performance when approaching the junction.

Anahtar Kavram

Impact of Coasting on Engine Braking and Brake Overheating (Brake Fade)
Tahmini Süre:1m 0s
Soru 125Soru →

When driving in steady rain, The Highway Code requires you to increase your separation from the vehicle ahead to at least four seconds. How does this rule logically relate to the specific physical components that make up your overall stopping distance?

Cevabı ve açıklamayı göster

Cevap: While your thinking distance remains unaffected by the road surface, the reduced friction significantly extends your braking distance, requiring the doubled time gap to safely absorb this longer braking phase.

Cevap

The doubled time gap is required because the wet road significantly extends the braking distance component due to reduced friction, while the thinking distance component remains unaffected.
The correct answer accurately distinguishes between the two components of stopping distance. Thinking distance is determined by driver reaction time and speed, which are not intrinsically changed by a wet surface. However, braking distance relies on tyre grip, which is severely reduced in the rain. Therefore, doubling the time gap to four seconds specifically compensates for this extended braking phase.

Adım Adım Çözüm

1
Identify the two separate components that make up overall stopping distance.
Overall stopping distance consists of thinking distance (distance travelled during reaction time) and braking distance (distance travelled after brakes are applied).
Understanding these components is necessary to determine how wet conditions affect them individually.
2
Analyze how a wet road surface affects thinking distance.
Thinking distance remains the same for a given speed, as the road surface does not change a driver's cognitive reaction time.
Reaction time is a human factor, independent of the physical road grip.
3
Analyze how a wet road surface affects braking distance.
The water reduces tyre grip (friction), which means the vehicle will travel much further once the brakes are applied before coming to a complete stop.
Less friction means less braking force can be transmitted to the road surface.
4
Relate these physical changes to the four-second rule.
Because the braking distance effectively doubles in wet conditions, the overall safety margin must be increased from two seconds to four seconds to safely accommodate this extended braking phase.
This verifies that the four-second gap specifically compensates for the loss of mechanical grip, not a change in driver reaction time.

Anahtar Kavram

Stopping Distance Components in Wet Conditions
Soru 126Soru →

In a modern car fitted with electronic fuel injection, coasting in neutral or holding the clutch pedal fully depressed while decelerating consumes less fuel than remaining in gear with the accelerator fully released.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false. Modern vehicles equipped with electronic fuel injection employ overrun fuel cut-off systems that halt fuel delivery whenever the vehicle is decelerating in gear with the accelerator released. By contrast, coasting in neutral or keeping the clutch disengaged forces the engine to burn fuel to maintain idle speed. Additionally, Highway Code Rule 122 emphasizes that coasting severely diminishes vehicle control by eliminating engine braking and reducing steering precision.

Adım Adım Çözüm

1
Examine fuel injection behaviour during overrun while remaining in gear.
When rolling in gear with the accelerator released above idle speed, the vehicle momentum turns the engine, allowing the engine control unit (ECU) to shut off fuel delivery entirely.
Kinetic energy keeps the engine rotating, resulting in zero fuel consumption during in-gear deceleration.
2
Evaluate the mechanical and fuelling conditions during coasting.
When coasting in neutral or with the clutch held down, the engine is disconnected from the driven wheels and must actively inject fuel to maintain its idle speed of roughly 700 to 900 RPM.
Without rotational drive from the wheels, active combustion is required to keep the engine running.
3
Assess vehicle stability and safety implications under Highway Code Rule 122.
Coasting eliminates engine braking, places excessive thermal load on the friction brakes, reduces steering responsiveness, and prevents prompt acceleration if a hazard develops.
Staying in an appropriate gear provides critical safety margins alongside optimal fuel efficiency.

Anahtar Kavram

Impact of coasting on fuel injection cutoff, engine braking, and vehicle control
Tahmini Süre:45s
Soru 127Soru →

Taking over-the-counter medication that causes drowsiness increases a vehicle's thinking distance when responding to a hazard.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True. Drowsiness caused by medication slows driver reaction time, which directly increases the distance travelled before braking begins.
Thinking distance is the distance covered while the driver identifies a hazard and physically applies the brakes. Drowsiness induced by medication lengthens reaction time, causing the vehicle to cover more ground before deceleration begins.

Adım Adım Çözüm

1
Identify the components that determine thinking distance.
Thinking distance is the product of vehicle speed and driver reaction time.
It measures how far the vehicle moves between perceiving a hazard and initiating physical braking.
2
Determine how drowsy medication affects driver reaction time.
Sedating substances slow cognitive perception and motor response.
Drowsiness impairs alertness, delaying the driver's ability to spot a danger and move their foot to the brake pedal.
3
Evaluate the resulting impact on thinking distance.
A longer reaction time increases thinking distance proportionally.
Since the vehicle continues moving at speed during the prolonged reaction phase, thinking distance is extended.

Anahtar Kavram

Thinking distance is determined by vehicle speed and driver reaction time; any factor that impairs alertness or slows reaction time (such as drowsy medication) increases thinking distance.
Tahmini Süre:45s
Soru 128Soru →

When moving off on a road surface covered in packed snow or ice, selecting second gear rather than first gear helps to reduce wheel spin and establish traction.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True, because moving off in a higher gear such as second gear reduces torque at the driven wheels, helping to prevent wheel spin and maintain traction on slippery surfaces.
On snow and ice, friction between tyres and the road surface is severely limited. Moving off in second gear reduces torque at the drive wheels, enabling the vehicle to pull away smoothly without losing grip.

Adım Adım Çözüm

1
Identify the primary vehicle control hazard when moving off on ice and snow
The road surface provides very low grip, meaning normal torque levels from the engine will cause the driven wheels to spin without moving the car forward.
Packed snow and ice dramatically reduce the coefficient of friction between the tyres and the road.
2
Evaluate the mechanical effect of gear selection on wheel torque
First gear produces maximum wheel torque, which promotes wheel spin, whereas second gear lowers wheel torque.
Lower wheel torque allows smoother delivery of power to the tyres, preserving tyre adhesion.
3
Determine if the statement aligns with official DVSA winter driving guidance
The statement is accurate and reflects standard winter driving practice.
Selecting second gear and easing gently off the clutch is the recommended method to move off safely on snow and ice.

Anahtar Kavram

Adjusting gear selection and control inputs to maintain traction and safety margins on ice and snow
Tahmini Süre:45s
Soru 129Soru →

A motorist is driving towards a busy roundabout. Which factor will directly increase the distance the car travels before the driver reacts and presses the footbrake?

Cevabı ve açıklamayı göster

Cevap: Engaging in a hands-free telephone conversation

Cevap

Engaging in a hands-free telephone conversation directly increases thinking distance.
Thinking distance is the distance travelled while the driver perceives a hazard and decides to act before physically pressing the brake pedal. Engaging in a hands-free phone conversation diverts cognitive attention away from the road, slowing reaction time and increasing thinking distance.

Adım Adım Çözüm

1
Define thinking distance in the context of vehicle stopping margins.
Thinking distance is the distance a vehicle covers during the driver's reaction time, from perceiving a hazard to initiating braking.
Separates the driver reaction phase from the mechanical braking phase.
2
Differentiate driver-related reaction factors from vehicle and environmental braking factors.
Cognitive distraction from a telephone call increases perception and response delay, extending the vehicle's travel before brake application.
Road surface, vehicle load, and brake condition only affect the braking phase once the pedal is pressed.

Anahtar Kavram

Thinking distance depends directly on travelling speed and driver reaction time, which is impaired by cognitive distractions.
Tahmini Süre:1m 0s
Soru 130Soru →

On a dry road surface, a car travelling at 50 mph50\text{ mph} (80 km/h80\text{ km/h}) has a standard braking distance of 38 metres38\text{ metres}. According to The Highway Code, wet road conditions reduce tyre grip and cause the braking distance to double. What is the expected braking distance, in metres, for this car on a wet road surface?

Cevabı ve açıklamayı göster

Cevap: 76

Cevap

The braking distance on a wet road surface is 76 metres.
Under wet road conditions, surface water creates a barrier between the tyre tread and the tarmac, significantly reducing friction. According to The Highway Code, this doubles the braking distance from the dry baseline of 38 metres38\text{ metres} at 50 mph50\text{ mph} to 76 metres76\text{ metres}.

Adım Adım Çözüm

1
Identify the base braking distance on a dry road surface
Dry braking distance = 38 metres38\text{ metres}
The Highway Code establishes 38 metres38\text{ metres} (125 feet125\text{ feet}) as the standard braking distance at 50 mph50\text{ mph} under dry, optimal conditions.
2
Apply the wet road condition factor
Multiplier = 22
Water on the road reduces tyre adhesion and increases the distance required for the vehicle's brakes to bring it to a complete stop by at least double.
3
Calculate the final wet braking distance
38 m×2=76 metres38\text{ m} \times 2 = 76\text{ metres}
Multiplying the base dry braking distance by the wet weather factor yields the expected distance.

Anahtar Kavram

Braking distance is directly affected by road surface friction; wet road conditions double the braking distance compared to dry conditions.
Tahmini Süre:1m 0s
Soru 131Soru →

You are driving along an exposed bypass in severe weather conditions with sudden wind gusts and patches of fog. Ahead of you, a high-sided box van is swaying unpredictably across lane markings. What should you do to maintain safe margins?

Cevabı ve açıklamayı göster

Cevap: Increase your following distance by dropping well back and hold back from overtaking

Cevap

Increase your following distance by dropping well back and hold back from overtaking
High-sided vehicles are especially vulnerable to crosswinds and can easily be blown out of their lane. When combined with reduced visibility from fog, drivers should drop well back to expand their safety margin and wait until the vehicle is stable and the road is clear before attempting to pass.

Adım Adım Çözüm

1
Identify environmental and dynamic hazards
Recognise that high winds cause high-sided vehicles to veer unpredictably and fog reduces reaction time.
Hazard perception requires evaluating how combined adverse conditions affect other road users.
2
Apply defensive safety margin principles
Create a substantial buffer zone behind the unstable vehicle and defer overtaking until conditions are safe and clear.
Increasing separation distance gives adequate space to brake smoothly and observe developing hazards without becoming trapped.

Anahtar Kavram

Adjusting separation distance and avoiding hazardous overtakes near unstable high-sided vehicles in gusty wind and poor visibility
Tahmini Süre:1m 0s
Soru 132Soru →

When driving on an exposed road in severe gale conditions, maintaining a normal two-second following distance behind a high-sided vehicle is acceptable because the vehicle ahead blocks the crosswind and creates a stable buffer zone.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false because the two-second following rule is solely a minimum baseline for dry, benign conditions. High-sided vehicles are severely affected by crosswinds and can be blown off course or need to brake abruptly. Drivers following behind must substantially increase their following distance to compensate for turbulence and maintain a safe stopping buffer.

Adım Adım Çözüm

1
Analyse the hazard profile of high-sided vehicles in gale-force crosswinds
High-sided vehicles catch strong side winds easily, making them susceptible to sudden swerving, loss of control, shedding loads, or sudden braking.
Recognising vehicle vulnerability in crosswinds establishes the need for enhanced caution.
2
Evaluate the aerodynamic and visibility impact on a closely trailing vehicle
Trailing closely does not provide a safe buffer; instead, it exposes the vehicle to turbulent wake, restricts forward visibility, and severely curtails stopping space.
Understanding the aerodynamic wake prevents dangerous tailgating assumptions.
3
Apply Highway Code principles regarding adverse weather safety margins
The two-second rule is strictly a baseline for dry, calm conditions; severe crosswinds require extending the time gap and stopping margin considerably.
Increasing following distances ensures sufficient time and space to react to sudden hazard events ahead.

Anahtar Kavram

Adjusting separation distances and safety margins behind high-sided vehicles in severe crosswinds
Soru 133Soru →

You are driving along an unlit dual carriageway at night when a thick bank of fog suddenly reduces your visibility to approximately 50 metres. What should you do to maintain safe driving margins and vehicle visibility?

Cevabı ve açıklamayı göster

Cevap: Switch on dipped headlights and fog lights, reduce your speed, and significantly increase your following distance

Cevap

Turn on dipped headlights and fog lights, reduce speed, and significantly increase the separation distance behind the vehicle ahead.
When visibility is reduced to 100 metres or less, the Highway Code requires the use of dipped headlights and fog lights. Because visibility is limited to 50 metres, speed must be reduced substantially and following distance must be greatly increased so that the vehicle can comfortably stop within the visible distance ahead.

Adım Adım Çözüm

1
Assess the forward visibility against Highway Code criteria.
Visibility of 50 metres is well below the statutory 100-metre threshold for using front and rear fog lights (Rule 226).
Correct lighting ensures your vehicle is conspicuous to other road users without causing excessive glare.
2
Adjust vehicle lighting correctly.
Dipped headlights and fog lights are activated, avoiding main beam which reflects light back into the driver's eyes.
Dipped beams illuminate the road surface immediately ahead rather than scattering against fog particles.
3
Recalculate speed and safety margins.
Vehicle speed is reduced and following distance is extended beyond normal margins.
Drivers must always be able to pull up smoothly within the distance they can clearly see to be clear.

Anahtar Kavram

Adjusting safety margins, speed, and lamp usage in dense fog conditions
Tahmini Süre:45s
Soru 134Soru →

You are travelling across an elevated river viaduct where patchy fog reduces visibility to less than 100 metres and strong crosswinds cause vehicle buffeting. Which TWO actions should you take to maintain safe margins?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Operate your fog lights while visibility remains severely impaired, switching them off once conditions improve.; Substantially increase your following distance from the vehicle ahead.

Cevap

Use fog lights when visibility is under 100 metres (turning them off when it improves) and substantially increase following distance.
In dense fog where visibility drops below 100 metres, using fog lights ensures you can see and be seen, provided they are switched off once visibility improves to prevent dazzling other drivers. Additionally, expanding your following distance creates an essential safety buffer to react safely to sudden braking or wind-induced vehicle swerving.

Adım Adım Çözüm

1
Assess lighting requirements under Highway Code Rule 226
Activate fog lights because forward visibility is below the 100-metre threshold, planning to turn them off once visibility clears
Fog lights make your vehicle conspicuous to other road users without dazzling them once conditions recover
2
Adjust longitudinal and lateral safety margins for combined fog and wind hazards
Increase the separation gap beyond standard dry-weather following distance
Reduced visibility delays hazard detection while wind turbulence causes vehicle instability, demanding greater braking and thinking margins

Anahtar Kavram

Adjusting lighting and following margins in fog and high crosswinds
Tahmini Süre:1m 0s
Soru 135Soru →

A passenger car is travelling at a constant speed of 60 mph60\text{ mph} (96 km/h96\text{ km/h}) on a dry, level tarmac road, where its standard braking distance is 55 metres55\text{ metres}. Heavy rainfall subsequently coats the road surface with water, reducing tyre grip. According to The Highway Code, what is the vehicle's expected braking distance in metres under these wet road conditions?

Cevabı ve açıklamayı göster

Cevap: 110

Cevap

110 metres
Under Rule 126 and the general guidance of The Highway Code, wet weather significantly reduces tyre grip, requiring at least double (2×2\times) the standard dry braking distance. At 60 mph60\text{ mph}, the dry braking distance is 55 metres55\text{ metres}, making the wet braking distance 55 metres×2=110 metres55\text{ metres} \times 2 = 110\text{ metres}.

Adım Adım Çözüm

1
Determine the standard braking distance on a dry surface
Braking distance on dry road = 55 metres55\text{ metres}
The baseline braking distance for a vehicle travelling at 60 mph60\text{ mph} under ideal dry conditions is 55 metres55\text{ metres} (180 feet180\text{ feet}).
2
Apply the wet road surface multiplier factor
Multiplier = 2×2\times
Water between the tyre tread and road surface reduces friction, which doubles the required braking distance under UK Highway Code rules.
3
Calculate the resulting wet braking distance
55 m×2=110 metres55\text{ m} \times 2 = 110\text{ metres}
Multiplying the baseline dry braking distance by the wet road multiplier provides the total distance covered while decelerating to a complete stop.

Anahtar Kavram

Effect of wet road surfaces on vehicle braking distance
Tahmini Süre:1m 0s
Soru 136Soru →

When travelling down a steep gradient, a vehicle's braking distance will be significantly longer than when travelling on a level road at the same speed.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True
When driving downhill, the downward component of gravity acts in the same direction as the vehicle's motion. This adds momentum and counteracts the braking force, leading to a longer distance required to stop compared to level ground at the same speed.

Adım Adım Çözüm

1
Identify the external physical forces acting on the vehicle while braking on a slope.
On a downward gradient, a component of gravitational force acts parallel to the slope in the forward direction of travel.
Determining all acting forces is required to evaluate their impact on the vehicle's deceleration.
2
Analyze how the downward component of gravity interacts with the braking system.
The brakes must dissipate both the kinetic energy of the vehicle and counteract the continuous gravitational pull down the slope, resulting in a lower net deceleration rate.
Net deceleration determines how rapidly the vehicle's speed drops to zero.
3
Compare the braking distance on a gradient to standard braking on flat ground.
Because deceleration is reduced on a downhill incline, the vehicle travels a greater distance before coming to a standstill than it would on a level surface at identical speed.
On flat ground, gravity acts entirely perpendicular to the road surface rather than accelerating the vehicle forward.

Anahtar Kavram

The effect of road gradient and gravitational force on vehicle braking distance
Soru 137Soru →

You are driving along a road sheltered by high buildings and dense hedgerows on a very windy day. What hazard should you prepare for as you drive past the end of the sheltered section into open countryside?

Cevabı ve açıklamayı göster

Cevap: A sudden side gust of wind that could push your vehicle off course

Cevap

A sudden side gust of wind that could push your vehicle off course
When emerging from behind buildings, walls, or hedgerows into open areas, the sudden exposure to strong crosswinds can buffet the vehicle and blow it off its intended line. Drivers must anticipate this hazard and maintain firm steering control.

Adım Adım Çözüm

1
Identify the environmental change when transitioning from a sheltered road to open space in windy conditions.
Recognise that physical structures like buildings and hedges block crosswinds, creating an abrupt change in wind force when leaving them.
Sudden gusts are most severe at boundary points where wind breaks end.
2
Anticipate the effect of crosswinds on the vehicle's lateral safety margins and lane position.
Prepare to maintain a firm grip on the steering wheel and adjust steering input to keep a safe path.
Proactive anticipation prevents the vehicle from swerving into adjacent lanes or oncoming traffic.

Anahtar Kavram

Anticipating sudden crosswinds and adjusting lateral safety margins when passing gaps in roadside shelter.
Tahmini Süre:1m 0s
Soru 138Soru →

Changing down to a lower gear abruptly while travelling on a slippery road can cause the driven wheels to lose traction and trigger a skid.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True
The statement is true because dropping into a lower gear abruptly causes rapid engine braking. On slippery surfaces where tyre adhesion is already compromised, this sudden rotational resistance can exceed available tyre grip, causing the driven wheels to lock or slide and initiating a skid.

Adım Adım Çözüm

1
Analyze the mechanical force produced by an abrupt downshift.
Releasing the clutch quickly in a lower gear forces the driven wheels to slow down immediately due to engine braking.
The engine's lower rotational speed resists the rotation of the driven axle when engaged in a lower gear.
2
Evaluate the tyre-road friction relationship under slippery conditions.
Low-friction surfaces provide minimal grip, making tyres vulnerable to braking torque.
If the deceleration force transmitted through the drive wheels exceeds the road surface grip threshold, the tyres begin to slide rather than roll.
3
Determine the validity of the statement regarding skid initiation.
The statement correctly identifies abrupt downshifting as an operational cause of skidding.
Skidding is caused by excessive driver inputs relative to available grip, including harsh acceleration, aggressive steering, footbraking, or abrupt engine braking.

Anahtar Kavram

Engine braking and harsh downshifting as a cause of skidding on low-adhesion surfaces
Tahmini Süre:45s
Soru 139Soru →

A driver is travelling on a road where surface water has pooled after heavy rainfall. If the driver is forced to brake firmly from a speed of 40 mph40\text{ mph} (64 km/h64\text{ km/h}), how will these wet road conditions affect the vehicle's braking distance compared to normal, dry tarmac?

Cevabı ve açıklamayı göster

Cevap: It will be at least doubled because water reduces friction between the tyres and the road

Cevap

The vehicle's braking distance will be at least doubled because water reduces friction between the tyres and the road surface.
According to the UK Highway Code, wet road surfaces significantly diminish tyre grip and braking efficiency, causing the vehicle's braking distance to be at least doubled compared to dry conditions.

Adım Adım Çözüm

1
Identify the specific component of stopping distance affected by road surface moisture
Braking distance is the physical distance travelled while the brakes are applied, which depends directly on tyre-to-road friction.
Thinking distance depends on driver perception and reaction, whereas braking distance depends on vehicle and road physics.
2
Apply standard UK Highway Code multiplier rules for wet road conditions
Wet roads reduce tyre traction, resulting in at least double (2×2\times) the standard dry braking distance.
Water forms a lubricating layer between the tread blocks and tarmac, reducing maximum deceleration.

Anahtar Kavram

Braking distance on wet asphalt is at least double that of dry asphalt due to reduced friction between tyres and the road.
Tahmini Süre:1m 0s
Soru 140Soru →

You are accelerating smoothly away from a junction onto an icy road when the driven wheels suddenly lose traction, causing the rear of the car to slide sideways. What is the correct initial action to regain control of the vehicle?

Cevabı ve açıklamayı göster

Cevap: Ease off the accelerator gently and steer smoothly in the direction of the skid

Cevap

Ease off the accelerator gently and steer smoothly in the direction of the skid
When a vehicle's driven wheels lose grip under acceleration on ice and the rear slides, easing off the accelerator removes excess torque so the tyres can regain traction. Steering smoothly into the direction of the slide brings the front of the vehicle back in line with the rear, stabilizing the vehicle.

Adım Adım Çözüm

1
Identify the cause of the loss of traction
Excessive wheelspin from acceleration on a low-friction icy surface has induced a rear-wheel skid
Recognising the skid type determines the correct mechanical response
2
Release the accelerator pedal smoothly
Engine power to the driven wheels is reduced, allowing tyre treads to regain grip on the road surface
Sudden or continued power inputs maintain wheelspin and prevent adhesion
3
Steer into the slide
The front wheels turn in the direction the rear of the car is sliding, correcting the yaw angle
Aligning the steering with the slide helps the vehicle track straight without overcorrecting

Anahtar Kavram

Skid correction through gentle power reduction and steering into the skid
Tahmini Süre:45s
ÖncekiSayfa 7 / 8Sonraki