Examkin

Safety Margins

158 soru

Tüm türler158Çoktan seçmeli81Çoklu seçim4Doğru / Yanlış24Sayısal28Eşleştirme17Sıralama4
Soru 141Soru →

According to The Official Highway Code, a car travelling at 30 mph30\text{ mph} (48 km/h48\text{ km/h}) has a standard braking distance of 14 metres14\text{ metres} on a dry, level asphalt road. When driving on a road surface covered in compact snow or ice, reduced tyre grip can increase the braking distance by up to 1010 times. What is the vehicle's estimated braking distance, in metres, under these icy conditions?

Cevabı ve açıklamayı göster

Cevap: 140

Cevap

140 metres
On icy or snow-covered roads, tyre friction is severely compromised, meaning braking distance alone can be up to ten times greater than on a dry road. Multiplying the standard 30 mph30\text{ mph} braking distance of 14 metres14\text{ metres} by 1010 gives an estimated braking distance of 140 metres140\text{ metres}.

Adım Adım Çözüm

1
Identify the base braking distance under standard dry conditions
The braking distance at 30 mph30\text{ mph} on dry tarmac is 14 metres14\text{ metres}
This is the baseline distance required for the vehicle's brakes and tyres to bring it to a complete halt from 30 mph30\text{ mph} under normal friction levels
2
Identify the factor by which braking distance increases in icy conditions
Icy surfaces multiply braking distance by a factor of up to 1010
Severely compromised tyre adhesion on ice drastically lowers frictional resistance between tyres and the road surface
3
Calculate the adjusted braking distance
14 m×10=140 metres14\text{ m} \times 10 = 140\text{ metres}
Multiplying the baseline braking distance by the weather multiplier yields the maximum expected braking distance on ice

Anahtar Kavram

Effect of icy road surfaces as a multiplier on vehicle braking distance
Tahmini Süre:1m 0s
Soru 142Soru →

While driving on a wet rural road, the rear of your car loses traction and begins to slide outward to the right. In what sequential order should you perform the following actions to safely correct the skid and regain vehicle stability?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct procedural order is: first ease off the accelerator without braking, next steer smoothly into the direction of the skid (to the right), then straighten the steering wheel as the car realigns, and finally resume gentle acceleration once full control is regained.
When the rear of a vehicle skids to the right (oversteer), the initial priority is to eliminate forces disrupting tyre grip by releasing the accelerator without braking. The driver must then steer smoothly into the direction of the skid (to the right) to arrest the yaw rotation. As the tyres regain adhesion and the car straightens, the steering must be centered immediately to prevent a secondary slide. Finally, gentle power can be applied once full directional control is established.

Adım Adım Çözüm

1
Remove foot from the accelerator pedal without touching the brake pedal.
Excess driving torque is removed from the slipping tyres without inducing wheel lock.
Tyres have a limited envelope of grip; removing acceleration and braking loads frees up available traction for directional control.
2
Turn the steering wheel smoothly towards the right, matching the direction of the rear slide.
The front wheels align with the vehicle's momentum, arresting the lateral rotation.
Steering into the slide counters oversteer and prevents the back of the car from overtaking the front.
3
Return the steering wheel to the straight-ahead position as the vehicle recovers.
The vehicle settles squarely in its lane without pendulum oscillation.
Failing to straighten the wheel promptly as traction returns causes a violent snap-back skid in the opposite direction.
4
Reapply light, progressive throttle once the vehicle is completely straight and stable.
Forward momentum is restored with balanced weight distribution.
Smooth power application maintains chassis balance once all four tyres have recovered normal adhesion.

Anahtar Kavram

Oversteer Skid Recovery and Counter-Steering Procedure
Tahmini Süre:1m 0s
Soru 143Soru →

Why is the two-second rule recommended as a measure of separation distance instead of a fixed number of car lengths?

Cevabı ve açıklamayı göster

Cevap: Because a time gap automatically increases the physical separation distance as your speed increases.

Cevap

A time gap automatically increases the physical separation distance as your speed increases.
The two-second rule provides a time-based safety margin. Because a vehicle travels further every second at higher speeds (for example, approximately 13.4 metres per second at 30 mph versus 26.8 metres per second at 60 mph), maintaining a constant two-second gap automatically doubles the physical separation distance when speed doubles. This ensures an adequate safety cushion without requiring drivers to estimate vehicle lengths or exact metre measurements on the move.

Adım Adım Çözüm

1
Analyze why stopping distance increases with vehicle speed
Higher travel speeds require greater overall stopping distances because both thinking distance and braking distance increase.
Understanding the relationship between speed and stopping distance is essential for maintaining safe margins.
2
Evaluate how a constant time gap functions at varying speeds
Since distance equals speed multiplied by time, maintaining a constant two-second gap ensures that physical distance increases linearly as vehicle speed increases.
A time-based rule automatically adjusts the physical gap without requiring the driver to calculate metres or vehicle lengths at different speeds.

Anahtar Kavram

The two-second rule scales physical separation distance proportionally with vehicle speed.
Tahmini Süre:1m 0s
Soru 144Soru →

Severe winter weather can create hazardous driving conditions where tyre grip on the road surface is drastically reduced. In freezing conditions where ice covers the carriageway, overall stopping distances can be up to 10 times greater than on a dry road. If a driver normally maintains the standard two-second following gap on a dry road, what is the minimum safe separation gap, in seconds, that should be allowed behind the vehicle ahead on an icy road?

Cevabı ve açıklamayı göster

Cevap: 20

Cevap

20 seconds
In good, dry conditions, drivers should maintain at least a two-second time gap. On icy roads, tyre grip is significantly reduced and stopping distances can be up to ten times greater. Multiplying the baseline 2 seconds by 10 yields a required minimum separation gap of 20 seconds.

Adım Adım Çözüm

1
Determine the baseline time separation gap for normal, dry road conditions.
The baseline separation gap is 2 seconds.
The Highway Code specifies that drivers should leave at least a two-second gap on dry roads to provide an adequate safety margin.
2
Identify the required safety multiplier for icy road surfaces.
The gap must be increased by a factor of up to 10.
Tyre traction is severely compromised on ice, which can increase overall stopping distances up to ten times.
3
Calculate the safe separation gap on ice by multiplying the baseline gap by the icy weather multiplier.
2 × 10 = 20 seconds.
Multiplying the 2-second baseline by the factor of 10 gives the total time gap required on icy roads.

Anahtar Kavram

The two-second rule provides a baseline separation gap of 2 seconds on dry roads, which must be scaled up to 10 times (20 seconds) on icy or snowy surfaces to maintain a safe stopping margin.
Tahmini Süre:45s
Soru 145Soru →

When performing an emergency stop on a wet road in a vehicle fitted with anti-lock brakes (ABS), you should rapidly pump the brake pedal to prevent the wheels from locking and maintain steering control.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false because vehicles equipped with anti-lock brakes (ABS) require firm, sustained pressure on the footbrake pedal during emergency braking. ABS automatically senses when wheels are about to lock and modulates brake fluid pressure rapidly to allow the driver to steer while braking. Manually pumping the pedal interrupts this automated process and increases the overall stopping distance.

Adım Adım Çözüm

1
Identify the vehicle's braking configuration and the road conditions described in the scenario
The vehicle is equipped with anti-lock brakes (ABS) operating on a slippery, wet road surface during an emergency stop.
Different braking systems require fundamentally different driver inputs during emergency braking and skid prevention.
2
Evaluate how ABS functions during hard braking on low-friction surfaces
ABS automatically monitors wheel rotation and modulates brake pressure multiple times per second when sensors detect impending wheel lock-up.
Automated pulsing prevents wheels from locking while preserving directional steering control.
3
Determine the correct driver action for an ABS-equipped vehicle
The driver should depress the brake pedal firmly and keep it fully applied until the vehicle stops.
Manually releasing or pumping the footbrake deactivates and resets the ABS cycle, significantly increasing stopping distance and destabilising the car.

Anahtar Kavram

ABS Operation and Emergency Braking Technique
Tahmini Süre:45s
Soru 146Soru →

You are approaching a sharp bend on a wet road. Why is it important to complete all necessary braking before you start turning the steering wheel?

Cevabı ve açıklamayı göster

Cevap: Demanding both braking and steering forces simultaneously increases the risk of the tyres losing grip and skidding.

Cevap

Demanding both braking and steering forces simultaneously increases the risk of the tyres losing grip and skidding.
Tyres have a finite amount of grip available to transfer forces between the car and the road surface. In wet conditions, the total available grip is reduced. If you attempt to brake heavily and steer at the same time, the combined lateral and longitudinal forces can easily overwhelm tyre adhesion, causing the vehicle to slide. Completing all necessary braking in a straight line before turning ensures that full grip is available to steer smoothly and safely around the bend.

Adım Adım Çözüm

1
Evaluate the tyre grip demands of individual vehicle control inputs.
Identify that tyres share available friction between longitudinal forces (braking or accelerating) and lateral forces (steering).
Tyres have a finite adhesion envelope that is significantly reduced on wet road surfaces.
2
Sequence the braking and steering actions before negotiating the bend.
Brake smoothly in a straight line to achieve a safe cornering speed before applying steering input.
Separating braking from steering reserves maximum grip for directional control, preventing wheel lock-up and skids.

Anahtar Kavram

Tyre Grip Allocation and Skid Prevention on Bends
Tahmini Süre:1m 0s
Soru 147Soru →

You are driving behind another vehicle on a dual carriageway in good, dry conditions. To ensure you are maintaining a safe separation distance using the two-second rule, what should you do?

Cevabı ve açıklamayı göster

Cevap: Note when the vehicle ahead passes a fixed roadside object and ensure at least two seconds elapse before your vehicle reaches it.

Cevap

Note when the vehicle ahead passes a fixed roadside object and ensure at least two seconds elapse before your vehicle reaches it.
In good, dry road conditions, drivers should maintain at least a two-second time gap behind the vehicle ahead. This is measured by choosing a fixed reference point (such as a bridge or road sign); when the vehicle in front passes that point, at least two seconds must elapse before your vehicle reaches the same point.

Adım Adım Çözüm

1
Identify a stationary reference point ahead
A fixed marker such as an overhead bridge, signpost, or lamppost is selected.
A stationary object provides an unmoving benchmark to measure time separation.
2
Start counting when the lead vehicle passes the reference point
Count 'one thousand and one, one thousand and two' (two seconds).
This measures the time interval between the two vehicles passing the exact same spot.
3
Assess your vehicle's position upon finishing the count
If you reach the marker before finishing the two-second count, you are too close and must increase your following distance.
A two-second gap ensures sufficient thinking and braking distance under normal dry conditions.

Anahtar Kavram

The two-second rule provides a time-based safety margin on dry roads, verified using a stationary roadside marker.
Tahmini Süre:45s
Soru 148Soru →

Match each road and traffic scenario with the correct minimum following distance rule or action required by the Highway Code.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Driving on dry asphalt in clear daylight conditions
Driving on wet roads during persistent rainfall
Driving on roads affected by ice and compacted snow
Another driver overtakes and pulls into the safety gap ahead of you

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Dry road conditions require a minimum 2-second gap; wet road conditions require at least 4 seconds; icy conditions require up to 20 seconds; and having your safety gap compromised requires easing off the accelerator to restore the full gap.
According to the Highway Code, separation distances are based on the two-second rule in dry conditions, doubled to four seconds on wet roads, and increased up to ten times (twenty seconds) on icy roads. If another driver encroaches upon this buffer, the driver must smoothly ease off the accelerator to restore the appropriate gap.

Adım Adım Çözüm

1
Identify the standard baseline following distance under optimal conditions
Dry, clear conditions require a baseline separation gap of 2 seconds.
Rule 126 of the Highway Code sets two seconds as the baseline time gap needed to react and stop safely.
2
Apply environmental multipliers for adverse weather conditions
Wet roads double the baseline to 4 seconds, while icy roads multiply the baseline by up to ten times, resulting in 20 seconds.
Tyre grip is severely compromised on wet and frozen surfaces, directly lengthening braking distances.
3
Determine the proper driver reaction when the separation buffer is cut short
The driver must decelerate progressively to re-create the necessary safety cushion.
Braking sharply could cause rear-end collisions; smoothly dropping back safely regains the required buffer.

Anahtar Kavram

Separation Distances and Weather Multipliers under Highway Code Rule 126
Tahmini Süre:1m 0s
Soru 149Soru →

A car is travelling in continuous rain where surface water significantly reduces tyre grip. To maintain a safe separation margin, what time gap should the driver allow between their car and the vehicle ahead?

Cevabı ve açıklamayı göster

Cevap: At least four seconds

Cevap

At least four seconds
In good, dry conditions, drivers should maintain a gap of at least two seconds from the vehicle ahead. On wet roads, tyre friction is significantly reduced and stopping distances are doubled, meaning the separation gap must be doubled to at least four seconds.

Adım Adım Çözüm

1
Identify the standard baseline separation distance in good driving conditions.
The baseline separation distance in dry conditions is at least two seconds.
This establishes the minimum time margin required for safe reaction and braking under normal grip.
2
Apply the wet weather multiplier to the baseline time gap.
Multiply the two-second gap by two to obtain four seconds.
Wet surfaces reduce tyre traction and approximately double total stopping distance.

Anahtar Kavram

Separation distances and wet weather multipliers
Tahmini Süre:45s
Soru 150Soru →

You are driving behind a large vehicle on a dry dual carriageway, keeping the standard minimum two-second separation gap. As continuous rain begins to fall, the road surface becomes wet, requiring you to double your separation distance in accordance with the Highway Code. Another car overtakes you and moves into the lane ahead, leaving you with an initial following time gap of 2.5 seconds behind it. By how many seconds must you increase your following time gap to establish the full recommended minimum separation distance for wet conditions?

Cevabı ve açıklamayı göster

Cevap: 1.5

Cevap

1.5 seconds
According to the UK Highway Code, drivers must allow at least a two-second time gap in normal dry conditions. On wet roads, tyre adhesion is significantly reduced and stopping distances are doubled, requiring a minimum following gap of at least four seconds (double the two-second rule). Since the current following gap behind the overtaking car is 2.5 seconds, the driver must ease off the accelerator to add another 1.5 seconds (4.0−2.5=1.54.0 - 2.5 = 1.5), thereby establishing the safe four-second separation distance.

Adım Adım Çözüm

1
Determine the minimum safe separation time required for wet road conditions according to the Highway Code.
The minimum separation gap required in wet weather is 4 seconds (2 seconds×2=4 seconds2\text{ seconds} \times 2 = 4\text{ seconds}).
The Highway Code specifies that the two-second rule must be doubled on wet roads because reduced tyre grip doubles stopping distance.
2
Identify the driver's current following time gap behind the newly positioned vehicle.
The current time gap is 2.5 seconds.
The vehicle pulling into the lane ahead has established an initial separation gap of 2.5 seconds.
3
Calculate the additional time buffer required to restore the full recommended safety margin.
4.0 seconds−2.5 seconds=1.5 seconds4.0\text{ seconds} - 2.5\text{ seconds} = 1.5\text{ seconds}.
Subtracting the current time gap from the target 4-second minimum determines the required time increase.

Anahtar Kavram

Separation Distances and Weather Adjustments
Tahmini Süre:1m 0s
Soru 151Soru →

Before negotiating a sharp bend on a rural road, a driver fully depresses the clutch pedal and freewheels into the corner. Why is this action hazardous to vehicle control?

Cevabı ve açıklamayı göster

Cevap: It removes engine braking and degrades steering stability through the turn.

Cevap

It removes engine braking and degrades steering stability through the turn.
Under Highway Code Rule 122, coasting (travelling in neutral or with the clutch pressed down) removes engine braking, causing the vehicle to rely entirely on the footbrake and significantly reducing steering response and stability on corners.

Adım Adım Çözüm

1
Analyze the mechanical consequence of keeping the clutch pedal pressed down when approaching a bend.
Disengaging the clutch separates the engine from the driven wheels, eliminating the natural restraining effect of engine braking.
Engine braking provides predictable deceleration without relying solely on the footbrake.
2
Evaluate the vehicle handling consequences of coasting into a turn under Highway Code Rule 122.
Without engine power driving the wheels or engine braking steadying the chassis, the car has less directional stability and steering response becomes less precise.
Maintaining gear engagement keeps the vehicle settled and responsive throughout the corner.

Anahtar Kavram

Coasting reduces vehicle control by eliminating engine braking and impairing steering responsiveness, particularly on bends.
Tahmini Süre:1m 0s
Soru 152Soru →

A driver must understand the impact of coasting on vehicle dynamics and safety. Match each coasting scenario with its primary vehicle control consequence according to The Highway Code.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Selecting neutral when slowing down on the approach to a hazard
Holding the clutch down while descending a continuous steep gradient
Freewheeling while steering through a sharp corner or bend
Coasting when needing to respond promptly to an emerging hazard

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Matching pairs: Selecting neutral on approach to a hazard matches with elimination of engine braking; holding the clutch down on a steep gradient matches with rapid speed increase and brake fade; freewheeling through a corner matches with reduced stability and steering response; and coasting when responding to emerging hazards matches with delay in engaging the correct gear.
Rule 122 of The Highway Code clearly defines coasting as travelling in neutral or with the clutch pressed down. It reduces driver control because engine braking is eliminated, vehicle speed downhill increases rapidly, steering control and cornering grip are compromised, and selecting the appropriate gear in an emergency is delayed.

Adım Adım Çözüm

1
Analyse the mechanical effect of selecting neutral when approaching a hazard.
Drivetrain is disconnected, which removes engine braking resistance.
Without engine braking, all decelerative force must come from the footbrake, increasing stopping distance if not managed properly.
2
Examine the dynamics of descending a steep gradient with the clutch depressed.
Gravity causes the vehicle to gain momentum rapidly.
Excessive reliance on the footbrake to counter gravity causes friction surfaces to overheat, leading to brake fade.
3
Assess vehicle cornering stability while freewheeling.
Chassis balance and steering precision are degraded.
Engaged drive helps maintain tyre contact patch grip and chassis equilibrium through bends.
4
Evaluate the driver's ability to react when an immediate speed adjustment is needed.
Extra time is required to match engine revs and engage the correct gear.
Coasting leaves the vehicle without immediate motive power during emergency manoeuvres.

Anahtar Kavram

Coasting removes engine braking, reduces steering stability, increases downhill speed, and causes delays in gear selection as outlined in Highway Code Rule 122.
Tahmini Süre:1m 15s
Soru 153Soru →

While following traffic on a rural single carriageway in good, dry conditions, you decide to verify that you are leaving an adequate safety gap. Which procedure should you follow to apply the two-second rule correctly?

Cevabı ve açıklamayı göster

Cevap: Choose a stationary roadside marker and ensure your car reaches it no earlier than two seconds after the vehicle ahead passes it

Cevap

Choose a stationary roadside marker and ensure your car reaches it no earlier than two seconds after the vehicle ahead passes it
The correct method to verify separation distance is to pick a stationary roadside reference point (such as a sign, tree, or bridge) and note when the vehicle ahead passes it. Counting two full seconds ('one thousand and one, one thousand and two') before your own vehicle passes the same reference point ensures a safe following distance that automatically scales with your travelling speed.

Adım Adım Çözüm

1
Identify a fixed stationary reference object along the roadside, such as an overhead sign, bridge, or lamp post.
A clear spatial benchmark is established ahead of both vehicles.
A fixed marker allows accurate measurement of the elapsed time between vehicles passing the same point.
2
Begin counting seconds ('one thousand and one, one thousand and two') the instant the rear of the vehicle ahead passes that reference object.
A time measurement of your separation gap is initiated.
The two-second interval accounts for both driver thinking time and vehicle braking distance under normal dry conditions.
3
Check whether your vehicle reaches the reference object before or after completing the count.
If you reach the object before finishing the two-second count, you are following too closely and must ease off the accelerator to extend the gap.
Ensures that your following distance dynamically scales with vehicle speed to prevent rear-end collisions.

Anahtar Kavram

The two-second rule provides a dynamic, speed-scaled separation margin in dry conditions by timing the interval between vehicles passing a fixed roadside point.
Tahmini Süre:1m 0s
Soru 154Soru →

When slowing down on the approach to a queue of traffic, a driver selects neutral and allows the vehicle to freewheel. Why is this technique considered poor driving practice?

Cevabı ve açıklamayı göster

Cevap: Engine braking is eliminated, which increases reliance on the footbrake and reduces vehicle control.

Cevap

Engine braking is eliminated, which increases reliance on the footbrake and reduces vehicle control.
Coasting separates the engine from the drivetrain, eliminating engine braking. As a result, the footbrake must do all the work, which increases brake wear, risks brake fade, and leaves the driver unable to quickly accelerate away from a sudden hazard.

Adım Adım Çözüm

1
Identify the mechanical consequence of coasting in neutral while slowing down.
Disconnecting the engine from the driven wheels eliminates natural engine braking resistance.
Highway Code Rule 122 highlights that coasting reduces driver control over vehicle speed.
2
Evaluate the impact of lost engine braking on stopping performance and vehicle handling.
The footbrake must absorb all kinetic energy, increasing brake temperature and reducing immediate vehicle responsiveness.
Without engine braking, stopping distances can increase under heavy braking demands and the driver cannot accelerate away quickly to avoid a developing hazard.

Anahtar Kavram

Coasting by travelling in neutral or holding down the clutch pedal removes engine braking, reduces overall vehicle control, and increases braking demand.
Tahmini Süre:1m 0s
Soru 155Soru →

You are driving along a motorway in good, dry conditions. As the vehicle ahead passes an overhead gantry sign, you count your separation time and find that you reach the same sign in just over one second. What action should you take?

Cevabı ve açıklamayı göster

Cevap: Ease off the accelerator and increase the gap until you are at least two seconds behind

Cevap

Ease off the accelerator and increase the gap until you are at least two seconds behind.
In good, dry conditions, drivers must maintain at least a two-second separation gap from the vehicle in front. If you count the interval between the leading vehicle passing a stationary reference point (such as an overhead gantry) and your vehicle reaching it, and the time is under two seconds, you are following too closely. The correct and safe response is to ease off the accelerator until a full two-second buffer is restored.

Adım Adım Çözüm

1
Evaluate the current time gap against the standard Highway Code guideline for dry road conditions.
The measured gap of just over one second is less than the required minimum two-second margin.
The two-second rule provides the minimum time needed for thinking and braking distances combined under normal dry conditions.
2
Determine the correct driving adjustment to safely extend the following distance.
Gently ease pressure on the accelerator to allow the distance between vehicles to widen until at least a two-second interval is established.
Gradual deceleration avoids shocking following traffic while re-establishing a safe buffer.

Anahtar Kavram

Applying and restoring the two-second following distance rule on high-speed roads
Tahmini Süre:45s
Soru 156Soru →

While driving along a busy multi-lane road, a driver selects neutral several hundred yards before turning into a side street. Why does coasting in this manner compromise vehicle safety?

Cevabı ve açıklamayı göster

Cevap: It eliminates engine braking and delays the driver's ability to accelerate quickly if road conditions change.

Cevap

Coasting eliminates engine braking and impairs the driver's ability to adjust speed or accelerate swiftly if a hazard develops.
According to Highway Code Rule 122, coasting reduces driver control because engine braking is eliminated. If an unexpected hazard occurs on approach to the junction, the driver cannot quickly accelerate out of danger and will have to spend crucial time selecting the correct gear.

Adım Adım Çözüm

1
Identify the driving action described in the scenario and its mechanical effect.
The driver has selected neutral while the vehicle is in motion, disconnecting the engine from the transmission.
According to Highway Code Rule 122, travelling in neutral or holding the clutch down is defined as coasting.
2
Analyse the impact of coasting on vehicle dynamics and driver control.
Without an engaged gear, natural engine braking is unavailable, placing total reliance on the footbrake and preventing immediate acceleration if a hazard emerges.
Maintaining an appropriate gear ensures the driver has full control to accelerate or decelerate smoothly.

Anahtar Kavram

Highway Code Rule 122: Vehicle control reduction and loss of engine braking caused by coasting
Tahmini Süre:45s
Soru 157Soru →

Under normal, dry road conditions, The Highway Code recommends maintaining a minimum safety margin of at least 2 seconds behind the vehicle ahead. When driving on a road affected by ice or packed snow, stopping distances can increase by up to ten times. To maintain an equivalent safety margin in icy conditions, what is the minimum recommended separation distance, in seconds, that you should leave behind the leading vehicle?

Cevabı ve açıklamayı göster

Cevap: 20

Cevap

20 seconds
Under dry conditions, drivers must leave at least a two-second time gap behind the vehicle in front. In icy conditions or on packed snow, tyre friction is drastically reduced and stopping distances can be up to ten times greater. Drivers must therefore increase their separation gap by up to ten times, resulting in a minimum safe gap of 20 seconds.

Adım Adım Çözüm

1
Determine the baseline time gap required in dry conditions.
The baseline time gap is 2 seconds2\text{ seconds}.
The standard two-second rule applies under good, dry driving conditions.
2
Apply the Highway Code multiplier for icy or packed snow conditions.
The separation gap increases by a factor of 1010.
Tyre grip is severely compromised on ice, increasing overall stopping distances by up to ten times.
3
Calculate the total required separation gap in seconds.
2 s×10=20 s2\text{ s} \times 10 = 20\text{ s}
Multiplying the baseline 2-second2\text{-second} rule by the 10×10\times multiplier yields the minimum safe following time.

Anahtar Kavram

Applying road condition multipliers to the two-second separation rule
Tahmini Süre:1m 0s
Soru 158Soru →

You are driving at 50 mph on a single carriageway during heavy rain. As the motorcycle ahead passes a fixed road sign, what is the minimum time that should elapse before your vehicle reaches the same sign to maintain a safe separation distance?

Cevabı ve açıklamayı göster

Cevap: At least 4 seconds

Cevap

At least 4 seconds
In good, dry conditions, drivers must leave a minimum separation gap of at least two seconds using a fixed stationary marker. When driving on wet roads, reduced tyre grip doubles overall stopping distances, meaning the separation time must be doubled to at least four seconds.

Adım Adım Çözüm

1
Determine the baseline separation gap required in dry conditions.
The standard minimum gap under dry road conditions is 2 seconds.
The two-second rule provides a sufficient safety margin for thinking and braking distances combined at any speed.
2
Apply the wet weather multiplier to the separation time.
The 2-second baseline is doubled to 4 seconds.
Reduced tyre grip on wet surfaces approximately doubles stopping distances, requiring double the time buffer.

Anahtar Kavram

Applying the two-second rule and doubling the separation gap to at least four seconds when driving on wet roads.
Tahmini Süre:45s
ÖncekiSayfa 8 / 8