Examkin

Coasting and Vehicle Control

9 soru

Tüm türler9Çoktan seçmeli5Doğru / Yanlış2Eşleştirme2
Soru 1Soru →

Which driving action correctly matches each mechanical or handling outcome regarding coasting and vehicle control? Match each action on the left with its direct consequence on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Holding the clutch pedal down or selecting neutral while descending a hill
Relying continuously on the footbrake without engine resistance
Selecting and remaining in an appropriate lower gear downhill

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Holding the clutch down or selecting neutral matches with eliminating engine braking; relying continuously on the footbrake matches with increasing the risk of brake overheating and fade; selecting an appropriate lower gear matches with engaging engine braking to help regulate speed.
Coasting occurs when a vehicle travels in neutral or with the clutch pedal pressed down. This practice disconnects the engine from the driven wheels, removing engine braking. Consequently, the car accelerates more quickly down slopes, demands heavier use of the footbrake which leads to brake fade, and diminishes overall steering and stopping control.

Adım Adım Çözüm

1
Identify the direct mechanical consequence of coasting (depressing the clutch or selecting neutral).
Drivetrain disengagement removes engine braking, causing the vehicle to accelerate freely under gravity.
Highway Code Rule 122 states that coasting reduces driver control because engine braking is eliminated.
2
Determine the effect of relying exclusively on footbrakes during an unassisted descent.
Excessive friction causes severe heat buildup and potential brake fade.
Without engine braking to absorb kinetic energy, friction brakes bear the full thermal load.
3
Identify the correct technique for descending gradients safely.
Engaging a lower gear provides engine resistance.
Engine braking limits speed increases and preserves the effectiveness of the footbrake.

Anahtar Kavram

Coasting disconnects the engine from the driven wheels, eliminating engine braking and reducing overall vehicle control.
Tahmini Süre:45s
Soru 2Soru →

Coasting with the clutch pedal fully depressed while slowing down reduces mechanical wear on the footbrake because the transmission is disengaged from the engine.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false because pressing the clutch down eliminates engine braking assistance, forcing the footbrake to absorb all the vehicle's kinetic energy and thereby increasing mechanical wear.

Adım Adım Çözüm

1
Analyze the mechanical consequence of keeping the clutch pedal depressed while decelerating.
Disengaging the clutch separates the engine from the drive wheels, removing natural engine braking.
Engine braking provides significant retarding force that aids standard deceleration.
2
Determine the impact of losing engine braking on the vehicle's friction braking components.
The footbrake must perform 100% of the retarding effort, accelerating brake pad and disc wear.
According to Highway Code Rule 122, coasting eliminates engine braking and places heavier demands on the footbrake.

Anahtar Kavram

Engine braking and brake wear during coasting
Tahmini Süre:45s
Soru 3Soru →

Why can coasting down a steep hill be dangerous?

Cevabı ve açıklamayı göster

Cevap: Vehicle speed can increase rapidly because engine braking is unavailable

Cevap

Vehicle speed can increase rapidly because engine braking is unavailable
Coasting occurs when travelling in neutral or with the clutch pedal kept pressed down. Disconnecting the engine removes engine braking, causing the vehicle to gather speed much faster down slopes and putting excessive strain on the footbrakes.

Adım Adım Çözüm

1
Identify what mechanical change occurs during coasting
Disengaging the clutch or placing the gearbox into neutral disconnects the engine from the driven wheels.
Understanding the physical definition of coasting under Highway Code Rule 122 is essential for analyzing vehicle dynamics.
2
Evaluate the effect of gravity on a downward gradient without engine resistance
Without engine braking resistance, gravity causes the vehicle to accelerate more rapidly, requiring heavier footbrake usage.
This establishes why coasting directly compromises speed management and increases the risk of brake fade on hills.

Anahtar Kavram

Coasting eliminates engine braking, leading to faster acceleration on downhill gradients and reduced vehicle control.
Tahmini Süre:45s
Soru 4Soru →

While descending a steep slope towards a junction, a driver keeps the clutch pedal fully depressed over a prolonged distance to regulate the vehicle's progress. What primary hazard does this specific action introduce regarding vehicle control and stopping performance?

Cevabı ve açıklamayı göster

Cevap: The absence of engine braking places the entire workload on the footbrake, leading to brake overheating and reduced stopping effectiveness.

Cevap

The absence of engine braking places the entire workload on the footbrake, leading to brake overheating and reduced stopping effectiveness.
Holding the clutch down (coasting) separates the engine from the driven wheels, eliminating engine braking. On a downward gradient, gravity causes the car to speed up rapidly, requiring continuous footbrake application. This prolonged friction generates extreme heat, causing brake fade (loss of braking power) and compromising vehicle control when stopping at the junction.

Adım Adım Çözüm

1
Identify the driver's mechanical action and definition
Holding the clutch pedal down while moving constitutes coasting under Highway Code Rule 122.
Coasting disengages the engine flywheel from the gearbox and driving wheels.
2
Analyze vehicle dynamics on a downhill slope during coasting
Engine compression resistance (engine braking) is completely eliminated, permitting gravity to accelerate the vehicle freely.
Without natural engine resistance, the vehicle requires continuous or heavy application of the service footbrake to maintain a safe speed.
3
Determine the safety consequence of prolonged footbrake use
Continuous friction generates excessive thermal energy in the brake pads and discs, causing brake fade and significantly increasing total braking distance.
Excessive heat diminishes the coefficient of friction between braking surfaces, degrading stopping performance when approaching the junction.

Anahtar Kavram

Impact of Coasting on Engine Braking and Brake Overheating (Brake Fade)
Tahmini Süre:1m 0s
Soru 5Soru →

In a modern car fitted with electronic fuel injection, coasting in neutral or holding the clutch pedal fully depressed while decelerating consumes less fuel than remaining in gear with the accelerator fully released.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false. Modern vehicles equipped with electronic fuel injection employ overrun fuel cut-off systems that halt fuel delivery whenever the vehicle is decelerating in gear with the accelerator released. By contrast, coasting in neutral or keeping the clutch disengaged forces the engine to burn fuel to maintain idle speed. Additionally, Highway Code Rule 122 emphasizes that coasting severely diminishes vehicle control by eliminating engine braking and reducing steering precision.

Adım Adım Çözüm

1
Examine fuel injection behaviour during overrun while remaining in gear.
When rolling in gear with the accelerator released above idle speed, the vehicle momentum turns the engine, allowing the engine control unit (ECU) to shut off fuel delivery entirely.
Kinetic energy keeps the engine rotating, resulting in zero fuel consumption during in-gear deceleration.
2
Evaluate the mechanical and fuelling conditions during coasting.
When coasting in neutral or with the clutch held down, the engine is disconnected from the driven wheels and must actively inject fuel to maintain its idle speed of roughly 700 to 900 RPM.
Without rotational drive from the wheels, active combustion is required to keep the engine running.
3
Assess vehicle stability and safety implications under Highway Code Rule 122.
Coasting eliminates engine braking, places excessive thermal load on the friction brakes, reduces steering responsiveness, and prevents prompt acceleration if a hazard develops.
Staying in an appropriate gear provides critical safety margins alongside optimal fuel efficiency.

Anahtar Kavram

Impact of coasting on fuel injection cutoff, engine braking, and vehicle control
Tahmini Süre:45s
Soru 6Soru →

Before negotiating a sharp bend on a rural road, a driver fully depresses the clutch pedal and freewheels into the corner. Why is this action hazardous to vehicle control?

Cevabı ve açıklamayı göster

Cevap: It removes engine braking and degrades steering stability through the turn.

Cevap

It removes engine braking and degrades steering stability through the turn.
Under Highway Code Rule 122, coasting (travelling in neutral or with the clutch pressed down) removes engine braking, causing the vehicle to rely entirely on the footbrake and significantly reducing steering response and stability on corners.

Adım Adım Çözüm

1
Analyze the mechanical consequence of keeping the clutch pedal pressed down when approaching a bend.
Disengaging the clutch separates the engine from the driven wheels, eliminating the natural restraining effect of engine braking.
Engine braking provides predictable deceleration without relying solely on the footbrake.
2
Evaluate the vehicle handling consequences of coasting into a turn under Highway Code Rule 122.
Without engine power driving the wheels or engine braking steadying the chassis, the car has less directional stability and steering response becomes less precise.
Maintaining gear engagement keeps the vehicle settled and responsive throughout the corner.

Anahtar Kavram

Coasting reduces vehicle control by eliminating engine braking and impairing steering responsiveness, particularly on bends.
Tahmini Süre:1m 0s
Soru 7Soru →

A driver must understand the impact of coasting on vehicle dynamics and safety. Match each coasting scenario with its primary vehicle control consequence according to The Highway Code.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Selecting neutral when slowing down on the approach to a hazard
Holding the clutch down while descending a continuous steep gradient
Freewheeling while steering through a sharp corner or bend
Coasting when needing to respond promptly to an emerging hazard

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Matching pairs: Selecting neutral on approach to a hazard matches with elimination of engine braking; holding the clutch down on a steep gradient matches with rapid speed increase and brake fade; freewheeling through a corner matches with reduced stability and steering response; and coasting when responding to emerging hazards matches with delay in engaging the correct gear.
Rule 122 of The Highway Code clearly defines coasting as travelling in neutral or with the clutch pressed down. It reduces driver control because engine braking is eliminated, vehicle speed downhill increases rapidly, steering control and cornering grip are compromised, and selecting the appropriate gear in an emergency is delayed.

Adım Adım Çözüm

1
Analyse the mechanical effect of selecting neutral when approaching a hazard.
Drivetrain is disconnected, which removes engine braking resistance.
Without engine braking, all decelerative force must come from the footbrake, increasing stopping distance if not managed properly.
2
Examine the dynamics of descending a steep gradient with the clutch depressed.
Gravity causes the vehicle to gain momentum rapidly.
Excessive reliance on the footbrake to counter gravity causes friction surfaces to overheat, leading to brake fade.
3
Assess vehicle cornering stability while freewheeling.
Chassis balance and steering precision are degraded.
Engaged drive helps maintain tyre contact patch grip and chassis equilibrium through bends.
4
Evaluate the driver's ability to react when an immediate speed adjustment is needed.
Extra time is required to match engine revs and engage the correct gear.
Coasting leaves the vehicle without immediate motive power during emergency manoeuvres.

Anahtar Kavram

Coasting removes engine braking, reduces steering stability, increases downhill speed, and causes delays in gear selection as outlined in Highway Code Rule 122.
Tahmini Süre:1m 15s
Soru 8Soru →

When slowing down on the approach to a queue of traffic, a driver selects neutral and allows the vehicle to freewheel. Why is this technique considered poor driving practice?

Cevabı ve açıklamayı göster

Cevap: Engine braking is eliminated, which increases reliance on the footbrake and reduces vehicle control.

Cevap

Engine braking is eliminated, which increases reliance on the footbrake and reduces vehicle control.
Coasting separates the engine from the drivetrain, eliminating engine braking. As a result, the footbrake must do all the work, which increases brake wear, risks brake fade, and leaves the driver unable to quickly accelerate away from a sudden hazard.

Adım Adım Çözüm

1
Identify the mechanical consequence of coasting in neutral while slowing down.
Disconnecting the engine from the driven wheels eliminates natural engine braking resistance.
Highway Code Rule 122 highlights that coasting reduces driver control over vehicle speed.
2
Evaluate the impact of lost engine braking on stopping performance and vehicle handling.
The footbrake must absorb all kinetic energy, increasing brake temperature and reducing immediate vehicle responsiveness.
Without engine braking, stopping distances can increase under heavy braking demands and the driver cannot accelerate away quickly to avoid a developing hazard.

Anahtar Kavram

Coasting by travelling in neutral or holding down the clutch pedal removes engine braking, reduces overall vehicle control, and increases braking demand.
Tahmini Süre:1m 0s
Soru 9Soru →

While driving along a busy multi-lane road, a driver selects neutral several hundred yards before turning into a side street. Why does coasting in this manner compromise vehicle safety?

Cevabı ve açıklamayı göster

Cevap: It eliminates engine braking and delays the driver's ability to accelerate quickly if road conditions change.

Cevap

Coasting eliminates engine braking and impairs the driver's ability to adjust speed or accelerate swiftly if a hazard develops.
According to Highway Code Rule 122, coasting reduces driver control because engine braking is eliminated. If an unexpected hazard occurs on approach to the junction, the driver cannot quickly accelerate out of danger and will have to spend crucial time selecting the correct gear.

Adım Adım Çözüm

1
Identify the driving action described in the scenario and its mechanical effect.
The driver has selected neutral while the vehicle is in motion, disconnecting the engine from the transmission.
According to Highway Code Rule 122, travelling in neutral or holding the clutch down is defined as coasting.
2
Analyse the impact of coasting on vehicle dynamics and driver control.
Without an engaged gear, natural engine braking is unavailable, placing total reliance on the footbrake and preventing immediate acceleration if a hazard emerges.
Maintaining an appropriate gear ensures the driver has full control to accelerate or decelerate smoothly.

Anahtar Kavram

Highway Code Rule 122: Vehicle control reduction and loss of engine braking caused by coasting
Tahmini Süre:45s
Coasting and Vehicle Control Alıştırma Soruları — UK Driving Theory Test | Examkin