All practice questions

2524 questions

Question 2421Question

When towing a trailer or hauling a heavy load under ideal road conditions, maintaining the standard three-second following distance provides adequate stopping space because modern vehicle braking systems fully compensate for the additional weight.

Show answer & explanation

Answer: False

Answer

False. Towing a trailer or hauling a heavy load increases total stopping distance due to increased vehicle mass and momentum, requiring a following distance of at least 4 to 5 seconds under ideal conditions.
The statement is false because additional vehicle mass increases momentum and braking distance. Drivers towing a trailer or carrying heavy loads must increase their following distance to at least 4 to 5 seconds to ensure adequate stopping space.

Step-by-Step Solution

1
Analyze how increased vehicle mass affects braking physics and stopping distance.
Higher weight creates greater momentum and kinetic energy, requiring more braking force and distance to bring the vehicle to a standstill.
Total stopping distance is determined by perception time, reaction time, and physical braking distance, all of which are impacted when vehicle weight increases.
2
Determine the appropriate safe following distance for towing or heavy vehicle configurations.
The standard 3-second rule serves as a baseline for light passenger vehicles only; towing requires increasing the gap to 4 seconds or more.
An expanded space cushion compensates for the additional distance required to stop safely.

Key Concept

Effect of Vehicle Weight and Towing on Following Distance
Estimated Time:1m 0s
Question 2422Question

When being closely tailgated by another vehicle, you should increase the following distance between your vehicle and the car directly ahead of you.

Show answer & explanation

Answer: True

Answer

True
The statement is correct because increasing your forward following distance gives you additional reaction space. This allows for smooth, gradual braking, which reduces the likelihood of being rear-ended by a tailgating vehicle.

Step-by-Step Solution

1
Analyze the hazard caused by a tailgating driver.
The tailgating driver has inadequate stopping distance behind your vehicle.
If you are forced to stop abruptly, the tailgater will likely hit your vehicle from behind.
2
Determine the safest adjustments to speed control and following distance.
Increase the space cushion in front of your vehicle from the standard three seconds to four or more seconds.
A larger forward gap ensures you can decelerate smoothly rather than slamming on the brakes, allowing the tailgater behind you sufficient time to slow down safely.

Key Concept

Following Distance Adjustment for Tailgaters
Estimated Time:45s
Question 2423Question

A motorist is driving on a roadway with two lanes in each direction separated by a continuous center left-turn lane. A school bus traveling in the opposite direction comes to a stop and activates its red flashing lights and extendable stop arm. What is the motorist legally required to do?

Show answer & explanation

Answer: Stop completely before reaching the bus and remain stopped until the red lights turn off and the stop arm is retracted.

Answer

The motorist must stop completely before reaching the school bus and remain stopped until the flashing red lights are turned off and the stop arm is retracted.
When a school bus displays flashing red lights and extends its stop arm, traffic in both directions must come to a complete stop unless the roadway is physically divided by an unpaved median or concrete barrier. A center turning lane does not qualify as a physical divider, so oncoming drivers are required to stop and remain stopped until the bus deactivates its signals.

Step-by-Step Solution

1
Identify the roadway configuration
The roadway consists of two lanes in each direction separated by a shared center turn lane, which lacks a physical median or barrier.
School bus stopping laws grant exemptions to oncoming traffic only when roads are separated by an unpaved median or raised physical barrier.
2
Determine the legal stopping requirement
Because there is no physical barrier separating traffic, drivers in all lanes traveling in both directions must stop.
A center left-turn lane does not constitute a physical separation under state traffic codes.
3
Identify the duration of the required stop
Drivers must stay stopped until the red lights stop flashing and the stop arm is fully pulled back.
Proceeding while lights are active violates mandatory school bus safety laws.

Key Concept

School bus stopping rules on multi-lane roads without physical medians
Estimated Time:1m 0s
Question 2424Question

While driving past a park in a residential neighborhood, you observe several children playing close to the curb. Which of the following actions represents proper defensive driving and hazard anticipation?

Show answer & explanation

Answer: Reduce your speed, cover the brake pedal, and remain prepared to stop if a child unexpectedly enters the roadway.

Answer

Reduce your speed, cover the brake pedal, and remain prepared to stop if a child unexpectedly enters the roadway.
Defensive drivers anticipate potential hazards by recognizing risks early. Slowing down and covering the brake pedal when children are near the road significantly reduces perception-reaction time and stopping distance if an emergency stop becomes necessary.

Step-by-Step Solution

1
Identify potential hazards in the driving environment.
Recognize that children playing near the road are unpredictable visual hazards.
Defensive driving requires continuously scanning for vulnerable road users who might suddenly move into your path.
2
Adjust control inputs proactively.
Ease off the accelerator and place your foot lightly over the brake pedal.
Covering the brake eliminates reaction delay, allowing immediate stopping if a child runs into the street.

Key Concept

Defensive Driving and Hazard Anticipation
Estimated Time:45s
Question 2425Question

When entering a marked highway construction work zone where temporary regulatory signs display a reduced speed limit, a driver observes that no construction workers or active equipment are currently present on the roadway. What speed limit is the driver legally required to observe while traveling through this designated area?

Show answer & explanation

Answer: The reduced work zone speed limit posted on the regulatory signs until passing the end of the construction zone.

Answer

The driver must obey the reduced work zone speed limit posted on the regulatory signs until passing the end of the construction zone.
Official temporary regulatory signs posted in a designated construction work zone establish a legally binding speed limit. This posted limit remains enforceable continuously throughout the marked zone, even when no workers or equipment are actively operating, because underlying hazards such as lane shifts and narrow shoulders persist.

Step-by-Step Solution

1
Identify the nature of the traffic control device described in the scenario.
The temporary work zone signs are regulatory control devices establishing an enforceable speed limit.
Regulatory signs set legal speed boundaries that drivers must obey.
2
Evaluate the condition regarding worker presence versus posted regulatory requirements.
Statutory work zone speed limits take effect upon entering the marked zone defined by signs, not based on visual confirmation of personnel.
Work zones present ongoing hazards such as narrower lanes, shifted traffic patterns, and uneven pavement even when crews are off-site.
3
Determine the required driver behavior.
Maintain the posted work zone speed limit continuously until clear of the work zone.
Compliance ensures traffic safety and avoids statutory penalties for work zone speeding violations.

Key Concept

Work Zone Regulatory Speed Limit Enforcement
Estimated Time:1m 0s
Question 2426Question

A driver is approaching a two-way intersection marked by solid yellow centerlines with no regulatory signs or signal lights. The driver intends to turn left into a business entrance while an oncoming vehicle approaches straight from the opposite direction. What is the driver legally required to do before completing the turn?

Show answer & explanation

Answer: Activate the turn signal continuously for a minimum of 100 feet before the turn and yield the right-of-way to all oncoming traffic.

Answer

The driver must continuously activate the turn signal for at least 100 feet prior to the turn and yield the right-of-way to all oncoming traffic traveling straight.
Executing a safe and legal left turn across opposing traffic requires signaling continuously for a minimum distance of 100 feet prior to the turn and yielding the right-of-way to all oncoming vehicles proceeding straight.

Step-by-Step Solution

1
Check traffic and prepare to signal
Identify the upcoming turn location and monitor surrounding traffic using mirrors.
Establishes situational awareness prior to altering vehicle speed or direction.
2
Activate the turn signal at the required distance
Turn signal is activated at least 100 feet before reaching the driveway entrance.
Fulfills legal signaling requirements and gives other drivers adequate time to react.
3
Yield right-of-way to oncoming traffic
Wait in the proper lane with wheels pointed straight until opposing traffic clears.
Oncoming traffic traveling straight has right-of-way over left-turning vehicles.
4
Complete the left turn safely
Steer into the destination lane once a safe gap in traffic exists.
Ensures the maneuver is executed without forcing oncoming drivers to brake or swerve.

Key Concept

Turning Procedures, Signaling Distances, and Left Turn Right-of-Way
Estimated Time:1m 0s
Question 2427Question

You are approaching an intersection where the overhead traffic light is solid green, but a police officer standing in the center of the intersection is holding up their hand and signaling for your lane to stop. Which action must you legally take?

Show answer & explanation

Answer: Stop completely as directed by the police officer, because manual officer instructions take precedence over electronic traffic signals.

Answer

Stop completely as directed by the police officer, because manual officer instructions take precedence over electronic traffic signals.
Directions given by a police officer or authorized traffic control personnel always supersede traffic light signals, posted signs, and general right-of-way rules. When an officer signals to stop, drivers must obey the officer regardless of what color the traffic light is displaying.

Step-by-Step Solution

1
Identify the controlling traffic directives present at the intersection.
Observe both an electronic green signal and a manual police officer stop directive.
Drivers must evaluate all legal authority signals present when approaching an intersection.
2
Apply the right-of-way hierarchy of authority.
Recognize that manual commands from a uniformed police officer override traffic lights, stop signs, and yield signs.
Traffic law establishes that human officer instructions take precedence over automated control devices.
3
Determine the mandatory driver action.
Bring the vehicle to a complete stop as directed by the officer.
Failing to obey a law enforcement officer's signal is a serious traffic violation and creates immediate collision hazards.

Key Concept

Traffic Officer Signal Priority over Traffic Signals
Estimated Time:1m 0s
Question 2428Question

When driving in your lane on a multi-lane roadway and traffic in the adjacent lane comes to a complete stop near a non-signaled intersection or mid-block area, defensive driving practices dictate that you may maintain your speed and proceed past the stopped vehicles as long as your own lane remains clear.

Show answer & explanation

Answer: False

Answer

The statement is false. Defensive drivers must anticipate that vehicles stopping unexpectedly in an adjacent lane may be yielding to a hidden pedestrian or hazard obscured from view.
The statement is false because maintaining full speed past vehicles stopped in an adjacent lane presents a severe collision risk. Defensive driving requires drivers to scan for visual obstructions, recognize that stopped cars frequently shield pedestrians or turning traffic, and proactively slow down to prepare for unexpected hazards.

Step-by-Step Solution

1
Analyze the driving scenario presented in the statement.
Identified a situation where adjacent traffic stops unexpectedly while your lane appears open.
Understanding the visual setup is critical for evaluating potential hazards.
2
Apply defensive driving hazard anticipation principles to hidden sightline obstructions.
Recognized that stopped vehicles block the driver's view of potential pedestrians or cross traffic.
Anticipating unobserved hazards prevents dangerous collisions.
3
Determine the proper driver response and evaluate the statement's truth value.
Drivers must decelerate and prepare to yield rather than maintain speed, making the statement false.
Maintaining speed past blind spots created by stopped traffic violates basic safe driving practices.

Key Concept

Defensive Driving and Hazard Anticipation
Question 2429Question

You are driving along a residential street and notice a delivery van parked near the curb at an intersection, completely blocking your view of the crosswalk and side street entrance. What is the proper defensive driving action to take as you approach this hazard?

Show answer & explanation

Answer: Reduce your speed, cover the brake, and scan for hidden pedestrians or emerging vehicles before continuing into the intersection.

Answer

The defensive driver should reduce speed, cover the brake pedal, and carefully scan the obstructed area for hidden pedestrians or cross traffic before proceeding.
When a large vehicle blocks your view of an intersection or crosswalk, defensive driving principles require reducing speed and covering the brake pedal. This proactive posture reduces your stopping distance and allows immediate stopping if a pedestrian steps out or a car pulls out from behind the visual obstruction.

Step-by-Step Solution

1
Identify potential sightline hazards
Recognize that the parked delivery van creates a sightline obstruction at an intersection crosswalk.
Defensive driving requires anticipating hazards that cannot yet be seen due to physical barriers.
2
Adjust speed and vehicle control position
Ease off the accelerator and place your foot over the brake pedal (covering the brake) without fully depressing it.
Covering the brake eliminates reaction lag time if a pedestrian or vehicle suddenly emerges from behind the obstruction.
3
Scan and evaluate before proceeding
Look around and under the parked vehicle for indications of motion, such as foot traffic or turning wheels.
Thorough visual scanning verifies that the path remains clear before committing to enter the intersection.

Key Concept

Hazard Anticipation and Blind Corner Clearance
Estimated Time:1m 0s
Question 2430Question

A driver is positioned in the left-most lane of a street featuring two designated left-turn lanes. When the signal turns green and the driver completes the turn onto a three-lane street, which lane must the driver legally enter?

Show answer & explanation

Answer: The far-left lane that directly corresponds to the driver's starting lane

Answer

The driver must complete the turn into the far-left lane that directly corresponds to their starting position.
When executing a turn from an intersection with multiple turning lanes, drivers must complete the maneuver into the lane that corresponds to the lane from which they started. A driver in the left-most turn lane must turn directly into the left-most destination lane.

Step-by-Step Solution

1
Identify the initial positioning and lane designation.
The driver is in the left-most lane of a double left-turn configuration.
Traffic laws require drivers in multiple turn lanes to maintain lane discipline throughout the entire maneuver.
2
Determine the proper completion lane on the destination roadway.
The turn must end in the lane corresponding directly to the entry lane (the far-left lane).
Drivers turning alongside other vehicles must not cross lane boundaries or drift into neighboring lanes mid-turn.

Key Concept

Multi-Lane Turning Lane Positioning
Estimated Time:1m 0s
Question 2431Question

You are driving down a two-lane road toward an intersection where your signal is a solid green light. An oncoming vehicle is waiting in the intersection to make a left turn across your path, and a pedestrian is standing near the curb preparing to enter the crosswalk. Which of the following actions best demonstrates defensive driving and hazard anticipation in this scenario?

Show answer & explanation

Answer: Ease off the accelerator to cover the brake and scan both the left-turning driver and the pedestrian before proceeding carefully.

Answer

The defensive driver should ease off the accelerator to cover the brake and scan both the left-turning vehicle and the pedestrian before proceeding carefully through the intersection.
Covering the brake and slowing down when approaching potential hazards (such as an oncoming left-turning vehicle and a pedestrian near the roadway) provides the driver with the necessary time and space cushion to react safely if another road user makes an unexpected entry into the lane.

Step-by-Step Solution

1
Identify potential conflict points in the upcoming driving scenario.
Recognize that the oncoming left-turning driver and the pedestrian on the curb present potential hazards.
Hazard anticipation requires scanning ahead to spot potential hazards before they cause an immediate emergency.
2
Adjust vehicle speed and prepare for potential intervention.
Easing off the gas pedal to cover the brake reduces total stopping distance.
Covering the brake eliminates reaction delay if an unexpected maneuver occurs.
3
Scan the intersection continuously while proceeding.
Maintain space cushion and control, ensuring safe passage.
Defensive driving prioritizes safety and hazard avoidance over relying strictly on right-of-way rules.

Key Concept

Defensive Hazard Anticipation at Intersections
Estimated Time:1m 0s
Question 2432Question

A motorist approaches an uncontrolled intersection on a two-lane roadway intending to make a left turn onto a cross street. An oncoming vehicle is approaching straight through the intersection from the opposite direction. Which procedure must the driver follow to execute this turn legally and safely?

Show answer & explanation

Answer: Signal continuously for at least 100 feet prior to turning and yield right-of-way to oncoming traffic until it is safe to cross.

Answer

Signal continuously for at least 100 feet prior to turning and yield right-of-way to oncoming traffic until it is safe to cross.
When turning left across opposing lanes of traffic, legal standards require drivers to signal their intention continuously for a minimum distance of 100 feet before reaching the turn point, and to yield the right-of-way to oncoming traffic traveling straight.

Step-by-Step Solution

1
Determine legal turn signal notification distance
Driver must activate the turn signal at least 100 feet before reaching the intersection
Provides sufficient warning to following vehicles and oncoming traffic of the intended maneuver
2
Establish right-of-way obligations for turning left across traffic
Yield to oncoming vehicles proceeding straight
Left turns cross opposing traffic lanes, requiring the turning driver to yield until the intersection is clear

Key Concept

Left-turn signaling distance and right-of-way requirements
Estimated Time:1m 0s
Question 2433Question

You are driving straight through an intersection where your lane is controlled by a flashing yellow signal light. At the same time, a vehicle on the cross street is stopped at a flashing red signal light. What is your legal requirement regarding right-of-way in this situation?

Show answer & explanation

Answer: Slow down and proceed through the intersection with caution, retaining the right-of-way over the cross-street vehicle.

Answer

Slow down and proceed through the intersection with caution, retaining the right-of-way over the cross-street vehicle.
A flashing yellow traffic signal alerts drivers to proceed through an intersection with caution without making a mandatory stop if the path is clear. Because cross-street traffic faces a flashing red light—which legally mandates a complete stop and yielding to cross traffic—the driver facing the flashing yellow signal retains the right-of-way.

Step-by-Step Solution

1
Identify the traffic signal controlling your direction of travel.
Your lane is governed by a flashing yellow signal light.
Flashing yellow signals instruct drivers to proceed with caution without requiring a complete stop unless necessary for safety.
2
Identify the traffic signal controlling the cross-street traffic.
Cross-street vehicles face a flashing red signal light.
A flashing red signal carries the legal weight of a stop sign, requiring drivers to stop completely and yield to approaching traffic.
3
Determine right-of-way precedence between the two flashing signal indications.
The driver facing the flashing yellow light maintains right-of-way precedence.
Traffic facing a cautionary flashing yellow light has legal priority over traffic required to stop and yield at a flashing red light.

Key Concept

Flashing Yellow vs. Flashing Red Intersection Right-of-Way Rules
Estimated Time:1m 0s
Question 2434Question

A driver traveling on a city street intends to execute a right turn at an approaching intersection. In what sequence should the driver perform the following actions to complete the turn safely and legally?

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The proper procedural order is: 1) Check mirrors and blind spots, 2) Activate the turn signal at least 100 feet in advance, 3) Position the vehicle in the far-right lane, and 4) Yield right-of-way to pedestrians and traffic before completing the turn.
The correct sequence begins with checking rear-view mirrors and looking over the right shoulder to scan blind spots. Next, the driver activates the turn signal continuously for at least 100 feet before the turn. Then, the vehicle is safely positioned into the far-right lane. Finally, the driver yields right-of-way to pedestrians and traffic before completing the turn.

Step-by-Step Solution

1
Scan surroundings
Driver verifies mirrors and checks the right blind spot.
Traffic conditions must be evaluated before signaling or changing position to avoid moving into an occupied space.
2
Activate turn signal
Turn signal is activated continuously for at least 100 feet.
Signaling well in advance informs other road users of the driver's intention to slow down and turn.
3
Adjust lane position
Vehicle enters the far-right turn lane or position near the curb.
Right turns must be initiated from the right-most lane available.
4
Yield and execute turn
Driver yields right-of-way and completes the turn into the proper lane.
Drivers must yield to pedestrians in crosswalks and cross-traffic before proceeding through the turn.

Key Concept

Procedural Sequence for Safe Turning and Signaling
Question 2435Question

When turning right on a solid red traffic light after coming to a complete stop, a driver is legally required to yield the right-of-way to oncoming vehicles making a legal U-turn guided by a green arrow signal at the same intersection.

Show answer & explanation

Answer: True

Answer

True
The statement is true because turning right on a red light requires stopping completely and yielding to all oncoming or cross-traffic legally proceeding through the intersection. Because an oncoming driver executing a U-turn on a green arrow has protected right-of-way, the right-turning driver on red must yield.

Step-by-Step Solution

1
Identify the signal controls for each driver involved in the intersection scenario.
The driver turning right faces a solid red light, while the oncoming driver making a U-turn has a green turn arrow signal.
Traffic control signals define the legal entry hierarchy at signalized intersections.
2
Evaluate legal precedence between a right-on-red maneuver and a protected arrow movement.
A protected green arrow grants immediate right-of-way, whereas a right turn on red requires yielding to all conflicting traffic.
Under standard traffic laws, drivers facing a red signal may proceed only when the turn can be completed safely without interfering with traffic operating under a green light or arrow.

Key Concept

Right-of-way priority during right turns on red versus protected green arrow movements
Question 2436Question

While traveling behind a school bus, you observe that its overhead alternating flashing amber (yellow) lights have been activated. Which of the following actions is legally required of you as a following driver?

Show answer & explanation

Answer: Slow down and prepare to stop, as the bus is preparing to unload or load passengers.

Answer

Slow down and prepare to stop, as the bus is preparing to unload or load passengers.
Flashing amber (yellow) lights on a school bus indicate that the vehicle is slowing down to stop and will soon actuate its red lights and stop-signal arm. Surrounding drivers must reduce speed and prepare to stop safely.

Step-by-Step Solution

1
Identify the traffic control indicator displayed by the school bus.
Recognize that alternating flashing amber (yellow) lights represent an advance warning signal.
School buses activate amber lights 100 to 500 feet prior to stopping.
2
Determine the legal obligation imposed on drivers following the bus.
Driver must reduce speed and anticipate a mandatory stop once the red lights deploy.
Amber lights signal imminent deployment of the stop arm and red flashing lights.

Key Concept

School Bus Flashing Amber Light Rules
Estimated Time:1m 0s
Question 2437Question

When approaching an intersection where an oncoming vehicle is waiting to turn left with its front wheels turned sharply toward your lane, covering your brake and anticipating that a rear-end collision behind that vehicle could push it into your path is a key defensive driving practice.

Show answer & explanation

Answer: True

Answer

True. Anticipating potential hazards like vehicles being pushed into oncoming lanes due to prematurely turned front wheels is a fundamental defensive driving practice.
Anticipating that a stationary vehicle with turned wheels can be knocked into your lane if struck from behind is a critical hazard identification skill. Preparing to stop by covering the brake significantly improves safety.

Step-by-Step Solution

1
Identify the vehicle positioning hazard.
Recognize that an oncoming vehicle waiting to turn left with its wheels turned left presents a high-risk trajectory if struck from behind.
Defensive driving relies on evaluating physical positioning and wheel angles to anticipate potential crash paths before they develop.
2
Determine the appropriate defensive response.
Cover the brake and prepare to slow down or stop.
Preemptively covering the brake eliminates reaction time delay, allowing the driver to stop safely if the oncoming vehicle is forced into their lane.

Key Concept

Defensive Driving and Hazard Anticipation
Question 2438Question

A driver approaches an intersection displaying a solid green circular traffic signal, intending to make a left turn. Oncoming traffic is approaching straight through the intersection from the opposite direction. What is the driver legally required to do before executing the left turn?

Show answer & explanation

Answer: Yield the right-of-way to oncoming traffic and complete the turn only when a safe clearance exists.

Answer

Yield the right-of-way to oncoming traffic and complete the turn only when a safe clearance exists.
When facing a solid circular green signal without a green arrow, a left turn is unprotected. The driver must yield the right-of-way to all oncoming vehicles and pedestrians, executing the turn only when there is sufficient clearance to safely complete the maneuver.

Step-by-Step Solution

1
Identify the signal type and intended maneuver.
The driver faces a solid green circular light and wishes to make a left turn.
Solid circular green lights without a green arrow signal indicate an unprotected left turn.
2
Determine right-of-way obligations.
Oncoming traffic traveling straight through the intersection has the right-of-way.
Traffic laws dictate that drivers turning left across traffic lanes must yield to oncoming vehicles.
3
Execute the turn safely.
Wait until oncoming traffic clears, then complete the turn safely.
Ensures the turn is completed without obstructing or colliding with oncoming vehicles.

Key Concept

Unprotected Left Turn Right-of-Way Rules
Estimated Time:1m 0s
Question 2439Question

Under Move Over laws, if a driver on a multi-lane highway approaches a stationary emergency vehicle displaying flashing lights on the roadside shoulder and traffic prevents a safe lane change, the driver is legally permitted to maintain the posted speed limit as long as they stay in their current lane.

Show answer & explanation

Answer: False

Answer

False. Drivers who cannot safely change lanes away from a stationary emergency vehicle with flashing lights must reduce their speed below the posted limit.
The statement is false because Move Over laws mandate a dual requirement: drivers must move over to an available non-adjacent lane if safe, OR significantly reduce speed (typically to 20 mph below the posted limit) if a lane change is unsafe or impossible.

Step-by-Step Solution

1
Identify the primary obligation under Move Over traffic laws.
Drivers must change lanes into a lane not adjacent to the stationary emergency vehicle if it is safe and possible to do so.
Changing lanes creates a safe buffer zone between traffic and emergency responders on the shoulder.
2
Determine the secondary obligation when changing lanes is impossible or unsafe due to traffic.
The driver must slow down to a safe speed, usually designated as 20 mph below the posted speed limit (or 5 mph if the speed limit is under 20 mph).
Maintaining the posted speed limit directly alongside emergency personnel on the shoulder poses a severe safety hazard.

Key Concept

Move Over Law Speed Reduction Requirement
Estimated Time:1m 0s
Question 2440Question

Several road users arrive at a signalized intersection at the same time. Place the following road users in the correct order of right-of-way precedence, starting with the road user who has the highest priority to proceed first (Position 1) and ending with the one who must yield to all others (Position 4).

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct order of right-of-way precedence from first to proceed to last is: 1) The emergency ambulance with active siren and lights, 2) The pedestrian crossing in a marked crosswalk on a walk signal, 3) The sedan proceeding straight on a solid green light, and 4) The SUV making an unprotected left turn on a solid green light.
Emergency vehicles operating with active siren and flashing lights hold primary priority over all traffic controls and other road users. Next, pedestrians crossing in a marked crosswalk with a walk signal hold right-of-way over non-emergency motorized vehicles. Among non-emergency vehicles facing a circular green light, straight-through traffic has right-of-way precedence over oncoming vehicles executing an unprotected left turn. Therefore, the left-turning vehicle must yield to all other users before proceeding.

Step-by-Step Solution

1
Identify top-priority emergency overrides
The emergency vehicle (ambulance with active siren/lights) takes Position 1.
Emergency vehicles displaying active visual and audible warning signals legally supersede standard traffic signals and normal right-of-way rules.
2
Evaluate vulnerable road user priority (pedestrians)
The pedestrian lawfully crossing with a 'WALK' signal takes Position 2.
Traffic laws grant pedestrians lawfully present in a marked crosswalk right-of-way over non-emergency vehicular traffic.
3
Determine priority between straight and turning traffic
The sedan proceeding straight on a green light takes Position 3, while the SUV making an unprotected left turn takes Position 4.
Under standard DMV rules, traffic proceeding straight through an intersection on a solid green light has right-of-way over oncoming vehicles attempting an unprotected left turn.

Key Concept

Right-of-Way Precedence Hierarchy at Signalized Intersections
PreviousPage 122 / 127Next
All practice questions — DMV Permit Practice Test | Examkin