All practice questions

2524 questions

Question 2441Question

You are driving on a two-lane highway with one lane of traffic in each direction. Ahead on the right shoulder, a police vehicle is stopped with its emergency lights flashing. Oncoming traffic prevents you from safely steering into the opposite lane to give space. Under state Move Over laws, what action are you legally required to take?

Show answer & explanation

Answer: Slow down to a speed significantly below the posted limit and proceed past the emergency vehicle with caution.

Answer

Slow down to a speed significantly below the posted limit and proceed past the emergency vehicle with caution.
Under state Move Over laws, if a driver on a two-lane road cannot safely change lanes due to oncoming traffic, the driver must reduce speed significantly below the posted limit and pass the stationary emergency vehicle with caution.

Step-by-Step Solution

1
Identify the roadside hazard (stationary emergency vehicle displaying active flashing lights).
Recognize that Move Over law protections are activated for roadside personnel.
Move Over laws apply to stopped emergency and maintenance vehicles displaying warning lights on the shoulder.
2
Evaluate whether a lane change into an adjacent lane can be executed safely.
Determine that continuous oncoming traffic on a two-lane road prevents changing lanes.
Drivers should only change lanes if it can be done safely without entering oncoming traffic streams.
3
Apply the secondary compliance option mandated by Move Over regulations for single-lane or high-density traffic situations.
Reduce vehicle speed substantially below the posted speed limit (typically 20 mph lower where specified by state law) and pass with caution.
Slowing down lowers kinetic energy, increases reaction time, and protects emergency responders on the roadside shoulder.

Key Concept

Move Over Law Compliance on Two-Lane Highways
Estimated Time:1m 0s
Question 2442Question

While traveling in the middle lane of a three-lane roadway, you observe a vehicle in the adjacent right lane drifting slightly into your lane while the driver repeatedly looks down. Simultaneously, another vehicle is tailgating you closely from behind. Which of the following actions represents the best defensive driving response to manage these hazards safely?

Show answer & explanation

Answer: Ease off the accelerator to gradually increase space ahead and create a safety buffer around the drifting driver without sudden braking.

Answer

Easing off the accelerator to gradually increase space ahead and create a safety buffer around the drifting driver without sudden braking is the safest course of action.
Gradually easing off the gas pedal opens up a protective space cushion in front of your vehicle and creates time to react if the distracted driver strays further into your lane. Doing this smoothly without hard braking prevents terrifying or surprising the tailgater behind you.

Step-by-Step Solution

1
Identify potential hazards surrounding your vehicle.
Recognize two active hazards: a distracted driver drifting from the right lane and a tailgater following closely behind.
Defensive driving requires continuously scanning 360 degrees around the vehicle to anticipate potential conflict points.
2
Evaluate response options against traffic safety principles.
Determine that hard braking risks a rear-end crash with the tailgater, while sudden steering without a shoulder check risks a side collision in the adjacent left lane.
Actions taken to avoid one hazard must not create a higher-risk hazard elsewhere.
3
Adjust speed smoothly to establish a maximum safety cushion.
Easiest and safest action is easing off the throttle to create forward space, allowing the drifting car to clear while giving the tailgater ample distance to react.
Controlling your speed and space cushion gives you time and options to react safely.

Key Concept

Hazard Anticipation and Space Cushion Management
Estimated Time:1m 0s
Question 2443Question

You are driving straight on a public street and arrive at an uncontrolled intersection (with no stop signs, yield signs, or traffic signals) at the exact same time as another vehicle approaching from the cross street on your right. According to standard right-of-way rules, which driver has the right-of-way?

Show answer & explanation

Answer: You must yield the right-of-way to the vehicle approaching from your right.

Answer

You must yield the right-of-way to the vehicle approaching from your right.
At an uncontrolled intersection where no signs or signals exist, when two vehicles arrive at the same time, standard traffic law mandates that the driver on the left must yield the right-of-way to the vehicle approaching from the right.

Step-by-Step Solution

1
Identify the intersection type and control devices
The intersection is uncontrolled, meaning there are no signals or traffic signs present to direct traffic.
Right-of-way priority at uncontrolled intersections follows standard statutory yielding rules.
2
Determine the arrival timing of the vehicles
Both vehicles arrive at the intersection simultaneously from perpendicular directions.
When arrival is simultaneous, the first-come, first-served rule cannot resolve priority.
3
Apply the standard uncontrolled intersection right-of-way rule
The vehicle on the left must yield to the vehicle approaching from the right.
State DMV regulations dictate that when two vehicles reach an uncontrolled intersection at the same time, the driver on the left yields to the driver on the right.

Key Concept

Right-of-way precedence at uncontrolled intersections
Question 2444Question

A driver traveling on a multi-lane highway approaches a stationary road maintenance vehicle stopped on the right shoulder with activated flashing emergency lights. Arrange the driver's proper actions in the correct chronological order from first to last to comply with standard Move Over and work zone safety laws.

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The proper sequential response when approaching a stationary emergency or maintenance vehicle on a multi-lane highway is: first, check mirrors and signal traffic intent; second, vacate the adjacent lane by changing lanes if safe to do so; third, reduce speed significantly if a lane change is unsafe or impossible; and fourth, proceed past the vehicle with heightened caution.
The correct order follows the standard legal hierarchy under Move Over regulations: observing traffic and signaling comes first, followed by executing a lane change into a non-adjacent lane. If traffic density makes a lane change impossible, reducing speed is the secondary requirement, followed by maintaining heightened caution until clear.

Step-by-Step Solution

1
Scan surrounding traffic and signal intent
Establishes spatial awareness and alerts surrounding drivers to your upcoming vehicle movement.
Traffic laws require drivers to assess safety and signal before changing lanes or altering speed abruptly.
2
Vacate the lane adjacent to the stopped roadside vehicle
Creates a empty buffer lane between the moving car and the roadside workers.
Move Over statutes mandate vacating the nearest lane on multi-lane roadways as the primary defense against roadside collisions.
3
Adjust speed if unable to change lanes
Provides safe control of the vehicle when traffic prevents lane changing.
When heavy traffic prevents moving over, laws mandate slowing down significantly to protect vulnerable roadside personnel.
4
Maintain vigilance until clear of the scene
Ensures no secondary hazards occur during passage.
Work zones and emergency scenes contain unpredictable hazards, requiring continued focus until completely past.

Key Concept

Move Over Law Procedures on Multi-Lane Roadways
Estimated Time:1m 0s
Question 2445Question

While driving through a highway construction work zone, a motorist approaches a point where an authorized flagger displays a hand-held STOP sign, but the temporary traffic signal overhead shows a solid green light. Which action is legally required of the driver?

Show answer & explanation

Answer: Stop completely before reaching the flagger and wait until directed to proceed.

Answer

The driver must bring their vehicle to a complete stop before reaching the flagger and await further instructions, as manual directions given by authorized work zone flaggers supersede automated traffic signals.
Manual directions provided by authorized traffic control personnel, such as police officers and construction zone flaggers, take precedence over electronic signals and written traffic signs. Drivers must follow the flagger's instructions directly and bring their vehicle to a complete stop.

Step-by-Step Solution

1
Identify the conflict between traffic control devices.
Recognize that the temporary overhead light shows solid green while an authorized flagger displays a manual STOP sign.
Traffic control conflicts require knowing the legal order of precedence.
2
Apply the rule of authority precedence in work zones.
Determine that manual signals from law enforcement officers and authorized work zone flaggers take precedence over electronic traffic signals and static signs.
Flaggers adjust traffic flow dynamically to protect workers and manage unpredictable hazards.
3
Select the proper driving response.
Bring the vehicle to a safe, complete stop prior to the flagger's position and wait for explicit clearance to move.
Complying with the flagger's STOP sign fulfills legal safety requirements in construction zones.

Key Concept

Priority of Work Zone Flagger Directions Over Traffic Signals
Question 2446Question

You are driving in the right lane of a multi-lane roadway and notice traffic coming to a stop far ahead. A vehicle directly behind you is tailgating closely. Which of the following actions demonstrates proper defensive driving to minimize collision risk?

Show answer & explanation

Answer: Tap your brakes lightly and ease off the accelerator early to decelerate gradually, expanding your front space cushion and giving the tailgater more time to stop.

Answer

Tap your brakes lightly and ease off the accelerator early to decelerate gradually, expanding your front space cushion and giving the tailgater more time to stop.
The correct action is to decelerate early and gradually by releasing the gas pedal and applying light brake pressure. This flashes brake lights to alert the driver behind early, extends their available stopping distance, and allows a larger cushion to be built in front of the vehicle to avoid sudden stops.

Step-by-Step Solution

1
Identify the multi-vehicle hazard context
Recognize that stopping traffic ahead paired with a tailgating vehicle behind creates a high-risk sandwich scenario.
Defensive driving requires anticipating hazards both ahead of and behind your vehicle simultaneously.
2
Adjust speed gradually and expand front buffer space
Lightly tapping the brake pedal illuminates brake lights early to alert the tailgater while easing off the accelerator smooths out deceleration.
Gradual braking extends the available stopping distance for the vehicle behind, while additional space in front allows a smoother, safer stop.

Key Concept

Hazard anticipation and space cushion management with tailgaters
Question 2447Question

A driver traveling along a suburban roadway intends to make a left turn into a commercial driveway. Which sequence of actions correctly describes the legal signaling and positioning requirements before initiating the turn?

Show answer & explanation

Answer: Check mirrors and blind spot, activate the left turn signal continuously for at least 100 feet prior to turning, and position the vehicle near the center line without crossing into oncoming traffic.

Answer

Check mirrors and blind spot, activate the left turn signal continuously for at least 100 feet prior to turning, and position the vehicle near the center line without crossing into oncoming traffic.
The correct response identifies the mandatory legal sequence: checking mirrors/blind spots, continuously signaling for at least 100 feet prior to the maneuver, and maintaining proper lane positioning near the center line while yielding to oncoming traffic.

Step-by-Step Solution

1
Check surrounding traffic and mirrors
Awareness of nearby vehicles, cyclists, and pedestrians
Before altering position or speed, the driver must verify safe road conditions.
2
Activate the turn signal at least 100 feet in advance
Clear notification to surrounding motorists of turning intent
State traffic laws mandate a minimum continuous signaling distance of 100 feet prior to turning.
3
Position vehicle in proper lane near center line and yield
Safe execution of left turn when opposing lanes are clear
Left turns across traffic require yielding right-of-way to oncoming vehicles.

Key Concept

Required signaling distance and yielding rules for left turns
Estimated Time:1m 0s
Question 2448Question

A driver on a city street intends to execute a right turn at an upcoming intersection that features an adjacent designated bicycle lane. Arrange the following steps in the correct chronological order from first to last.

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The proper sequence is: signal at least 100 feet ahead, check mirrors and the right blind spot, merge into the bicycle lane, yield to pedestrians and cyclists, and complete the turn into the rightmost lane.
Executing a safe right turn across a bicycle lane requires a logical sequence of actions: first communicating your intention by signaling at least 100 feet in advance, second verifying space by checking mirrors and looking over your right shoulder for bicyclists, third merging into the bicycle lane when clear, fourth yielding to any pedestrians or remaining traffic, and finally making the turn into the rightmost lane.

Step-by-Step Solution

1
Signal intent early
Turn signal is activated continuously at least 100 feet before the intersection.
Early signaling alerts trailing traffic and cyclists to your upcoming turn.
2
Perform visual checks
Mirrors and the right-side blind spot are checked over the shoulder.
You must confirm the bike lane is clear before physically crossing into it.
3
Position vehicle in bike lane
Vehicle enters the bike lane near the intersection.
Positioning in the bike lane before turning blocks cyclists from passing on the right into a turning vehicle.
4
Yield right-of-way
Wait for pedestrians and crossing traffic to clear.
Turning vehicles must yield to non-motorized users crossing their path.
5
Execute the turn
Turn directly into the rightmost lane of the target street.
Drivers must complete right turns into the rightmost travel lane to maintain lane discipline.

Key Concept

Proper sequencing for right turns across bicycle lanes
Estimated Time:1m 15s
Question 2449Question

When driving in urban or highway traffic, defensive driving principles require scanning the road 10 to 15 seconds ahead of your vehicle, rather than focusing only on the vehicle directly in front of you.

Show answer & explanation

Answer: True

Answer

True. Defensive driving requires scanning 10 to 15 seconds ahead of your vehicle to detect hazards early and maintain a safe visual lead.
Maintaining a visual lead of 10 to 15 seconds ahead—roughly one city block in town or a quarter-mile on highways—gives drivers time to identify potential conflicts early and make smooth speed or lane adjustments.

Step-by-Step Solution

1
Evaluate the standard visual scanning distance recommended for defensive driving.
Defensive driving guidelines specify maintaining a visual lead of 10 to 15 seconds ahead of the vehicle.
Looking far ahead helps drivers anticipate changes in traffic flow and hazards before they necessitate sudden braking or sharp steering changes.

Key Concept

Visual lead distance and hazard anticipation
Question 2450Question

Four road users are approaching a T-intersection where a terminating side road meets a multi-lane main street without active traffic signals. Arrange the road users in the correct order of right-of-way precedence, from highest priority (first to proceed) to lowest priority (last to proceed).

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct order of precedence is: 1) Emergency vehicle with active siren/lights, 2) Pedestrian crossing the side street, 3) Car traveling straight on the main street, 4) Car turning left from the terminating side street.
The emergency vehicle has absolute priority when using audible and visual signals. Next, pedestrians in crosswalks have priority over non-emergency traffic. Among the remaining motorized vehicles, the car on the continuing main street has right-of-way over the car entering from the terminating side road.

Step-by-Step Solution

1
Identify top statutory priority.
The emergency vehicle operating with sirens and lights takes precedence over all other traffic.
State vehicle codes grant active emergency response vehicles immediate right-of-way priority.
2
Determine vulnerable road user right-of-way.
The pedestrian lawfully in the marked crosswalk takes precedence over normal vehicle traffic.
Drivers must yield to pedestrians in marked crosswalks.
3
Apply T-intersection right-of-way rules between vehicle movements.
The vehicle driving straight on the main street proceeds before the vehicle turning from the side street.
Traffic on a continuing highway has right-of-way over traffic entering from a terminating road.
4
Determine lowest priority vehicle.
The vehicle turning left from the terminating road yields to all through traffic and proceeds last.
Left turns crossing lanes of traffic yield to straight through traffic on the main road.

Key Concept

Hierarchy of right-of-way rules at T-intersections involving emergency vehicles, pedestrians, and turning traffic.
Question 2451Question

A vehicle approaches an intersection displaying a circular green traffic signal, intending to turn left onto a cross street while oncoming vehicles are approaching from the opposite direction. What is the driver legally required to do before completing the turn?

Show answer & explanation

Answer: Signal the intent to turn at least 100 feet in advance, yield the right-of-way to oncoming traffic, and proceed only when it is safe.

Answer

The driver must continuously signal at least 100 feet before the turn and yield the right-of-way to oncoming traffic, completing the left turn only when there is a safe gap.
State traffic laws mandate that drivers must activate their turn signal continuously for at least 100 feet before executing a turn. Additionally, when turning left on a solid circular green light, the turn is unprotected, meaning the driver must yield the right-of-way to all oncoming traffic moving straight or turning right before completing the maneuver.

Step-by-Step Solution

1
Determine the required signaling distance prior to initiating the turn maneuver.
Drivers must activate the turn signal continuously for at least 100 feet before reaching the intersection.
Giving timely advance notice informs surrounding traffic of intended direction changes and maintains road safety.
2
Identify the right-of-way rules for an unprotected left turn on a solid green signal.
A solid circular green light permits a left turn only after yielding to oncoming vehicles and pedestrians.
Unlike a green arrow signal, a solid circular green light does not provide a protected turn phase.
3
Combine signal timing and yielding rules to establish the complete legal procedure.
Signal at 100 feet, yield to oncoming traffic, and turn when clear.
Following both signaling distance rules and right-of-way obligations ensures safe execution of the left turn.

Key Concept

Turning Procedures and Signaling
Estimated Time:1m 0s
Question 2452Question

While driving on a multi-lane urban road, you observe a cascade of brake lights activating several vehicles ahead in your lane, even though the traffic light at the upcoming intersection is green. What is the safest defensive driving response?

Show answer & explanation

Answer: Ease off the accelerator and cover the brake pedal while checking your rearview mirror to prepare for a safe stop.

Answer

Ease off the accelerator and cover the brake pedal while checking your rearview mirror to prepare for a safe stop.
Defensive driving requires scanning far ahead to anticipate potential hazards. Seeing brake lights cascade downstream indicates an obstacle or slowdown ahead. Easing off the gas and covering the brake prepares the driver to stop safely while checking rear traffic prevents abrupt maneuvers.

Step-by-Step Solution

1
Identify early hazard indicators downstream.
Recognize that multiple brake lights ahead signal a potential blockage or hazard regardless of the green light.
Defensive driving requires scanning 10 to 15 seconds ahead to spot hazards before they become immediate emergencies.
2
Adjust control inputs proactively.
Release the accelerator pedal and position your foot over the brake (cover the brake) without hard braking.
Covering the brake significantly reduces stopping distance if a full stop becomes necessary.
3
Check surroundings and rear space cushion.
Check the rearview mirror to assess trailing vehicles.
Monitoring behind ensures you can decelerate smoothly without getting rear-ended by tailgaters.

Key Concept

Defensive Driving and Hazard Anticipation
Estimated Time:1m 0s
Question 2453Question

You and another driver arrive at a four-way stop intersection at the exact same time. The other vehicle is stopped directly opposite your car across the intersection. If you intend to turn left and the opposite driver intends to proceed straight, which vehicle has the right-of-way?

Show answer & explanation

Answer: The vehicle proceeding straight has the right-of-way, so you must yield before making your left turn.

Answer

The vehicle proceeding straight has the right-of-way, so you must yield before making your left turn.
Under standard DMV traffic regulations, when two vehicles arrive at opposite stop signs of an intersection at the same time, a driver turning left must yield the right-of-way to a vehicle proceeding straight ahead. Because turning left requires crossing the path of oncoming traffic, the straight-through driver has precedence.

Step-by-Step Solution

1
Identify the intersection control and arrival timing
Both vehicles arrived at the four-way stop simultaneously from opposite directions.
Simultaneous arrival means arrival order alone cannot determine right-of-way precedence.
2
Determine intended vehicle paths
One vehicle is traveling straight through, while your vehicle is turning left across the oncoming lane.
Turning across an oncoming vehicle's path requires yield precedence to traffic traveling straight.
3
Apply right-of-way rules for opposing vehicles at multi-way stops
Yield the right-of-way to the driver going straight, then execute the left turn safely after they clear the intersection.
Traffic rules mandate that drivers executing a left turn must yield to oncoming traffic moving straight.

Key Concept

Right-of-Way for Opposing Left-Turning vs. Straight Vehicles at Multi-Way Stops
Estimated Time:1m 0s
Question 2454Question

You are driving on a two-lane road approaching a steep hill crest where your forward line of sight is severely restricted. As you near the crest, which of the following is the safest defensive driving practice to anticipate potential hazards beyond your visual range?

Show answer & explanation

Answer: Reduce your speed, cover the brake, and position your vehicle toward the right side of your lane.

Answer

Reduce speed, cover the brake, and stay toward the right side of your lane when approaching a blind hill crest.
When approaching a blind hill crest, defensive driving principles require adjusting your speed so that your stopping distance never exceeds your clear sight distance. Positioning your vehicle toward the right edge of your lane provides a safe cushion against oncoming vehicles that might be straddling the centerline, while covering the brake reduces reaction time if a hazard appears.

Step-by-Step Solution

1
Identify the visual restriction ahead.
Recognize that a hill crest prevents seeing stalled vehicles, pedestrians, or oncoming traffic beyond the top.
Defensive driving requires anticipating potential hazards that are currently out of view.
2
Adjust speed and vehicle position defensively.
Ease off the accelerator to reduce speed, cover the brake pedal for immediate reaction capability, and track toward the right edge of the lane.
This creates a safety buffer, lowers stopping distance below sight distance, and avoids oncoming vehicle drift.

Key Concept

Defensive sightline management and hazard anticipation at blind hill crests
Question 2455Question

A driver arrives at an intersection lacking traffic signals or signs and intends to execute a left turn across traffic. At the same time, another vehicle is approaching from the opposite direction traveling straight through the intersection. Which of the following actions is the turning driver legally required to take?

Show answer & explanation

Answer: Yield the right-of-way to the oncoming vehicle and wait until it is safe before completing the left turn.

Answer

The driver must yield the right-of-way to the oncoming vehicle traveling straight and complete the left turn only when it is safe to do so.
When executing a left turn at any intersection without a protected left-turn arrow, drivers are legally required to yield the right-of-way to all oncoming vehicles approaching from the opposite direction that are close enough to pose a hazard.

Step-by-Step Solution

1
Identify the intersection type and vehicle paths.
The intersection is uncontrolled, and the user's vehicle intends to turn left across the path of an oncoming vehicle moving straight.
Left turns cross opposing traffic lanes, creating potential collision points.
2
Apply right-of-way rules for turning vehicles.
Traffic moving straight through an intersection has priority over traffic turning left across those lanes.
Safety regulations mandate that left-turning vehicles yield to oncoming straight-through traffic until a safe gap exists.
3
Determine the proper driver action.
Signal continuously (at least 100 feet prior), stop or slow down, yield to oncoming traffic, and proceed when clear.
This complies with standard traffic safety laws regarding turning procedures.

Key Concept

Yielding Right-of-Way During Left Turns
Question 2456Question

A motorist traveling on a two-way roadway intends to make a left turn onto a multi-lane one-way street at an upcoming intersection. Which sequence correctly arranges the driver's actions from first to last to complete the turn safely and legally?

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct procedural order is: (1) Check mirrors/blind spots and move into the lane closest to the center line, (2) Activate the left turn signal continuously for at least 100 feet, (3) Slow down and yield to oncoming vehicles, cyclists, and pedestrians, and (4) Complete the turn into the leftmost available lane of the one-way street.
Executing a safe left turn onto a one-way street requires first positioning the vehicle near the center line, then giving a continuous signal for at least 100 feet, yielding right-of-way to oncoming traffic and pedestrians at the intersection, and finally entering the leftmost destination lane.

Step-by-Step Solution

1
Select the correct lane position
Vehicle is safely positioned near the center line of the two-way road.
Establishing proper lane position early prevents cutting across traffic lanes abruptly.
2
Signal intention to turn
Turn signal is activated at least 100 feet prior to the intersection.
Traffic laws mandate continuous signaling for at least 100 feet to warn surrounding traffic.
3
Assess intersection and yield
Speed is reduced and right-of-way is granted to oncoming traffic and vulnerable road users.
Left-turning vehicles must yield to oncoming straight-through traffic and pedestrians crossing the intersection.
4
Finish the turn into the designated lane
Vehicle enters the leftmost lane of the destination one-way road.
State driving regulations require turns into one-way streets to target the nearest left lane to avoid lane-straddling collisions.

Key Concept

Proper sequencing of lane positioning, signaling distance, yielding right-of-way, and lane entry when turning onto one-way roads.
Question 2457Question

You are driving along a two-lane road and notice a commercial delivery van stopped on the right shoulder with its hazard lights flashing, partially obstructing your sightline of an upcoming crosswalk. As you approach this situation, which of the following actions represents the best defensive driving practice?

Show answer & explanation

Answer: Reduce your speed, cover your brake pedal, and scan for pedestrians who may step out from in front of the stopped vehicle.

Answer

The driver should reduce speed, cover the brake pedal, and scan carefully for pedestrians who may emerge from around the stopped delivery vehicle.
When a stationary vehicle blocks the view of a crosswalk or sidewalk area, defensive drivers anticipate potential hidden hazards (such as pedestrians exiting from in front of the vehicle). Slowing down and covering the brake prepares the driver to stop instantly if necessary.

Step-by-Step Solution

1
Identify the hazard and sightline obstruction
Recognize that a large parked vehicle blocks the view of potential pedestrians at the crosswalk.
Defensive driving requires anticipating hazards in areas where sight distance is restricted.
2
Adjust vehicle speed and readiness
Ease off the accelerator and place the foot hovering over the brake pedal (covering the brake).
Covering the brake significantly reduces total stopping distance by eliminating reaction lag time if an unexpected hazard appears.
3
Scan the area continuously
Look around and under the stopped vehicle for movement or signs of pedestrians.
Early detection allows for smooth, controlled stopping without emergency braking maneuvers.

Key Concept

Hazard anticipation and sightline management
Question 2458Question

You are approaching a signalized intersection with a solid green circular light, intending to make a left turn. Directly opposite you, an oncoming vehicle is approaching the intersection with its right-turn signal activated. Which driver must yield the right-of-way in this situation?

Show answer & explanation

Answer: You must yield to the oncoming vehicle turning right and wait until the intersection is clear before executing your left turn.

Answer

You must yield to the oncoming vehicle turning right and wait until the intersection is clear before executing your left turn.
When facing a solid green circular light, turning left is an unprotected maneuver. Drivers turning left must yield the right-of-way to all oncoming traffic approaching from the opposite direction, including vehicles proceeding straight or turning right, until it is safe to complete the turn.

Step-by-Step Solution

1
Identify the signal state and vehicle maneuvers.
Both vehicles face a solid green circular light; one vehicle intends to turn left across oncoming lanes, while the other intends to turn right.
Right-of-way priority depends on whether the turn is protected or unprotected.
2
Apply standard DMV right-of-way rules for unprotected left turns.
Drivers turning left on a solid green circular signal must yield to all oncoming traffic going straight or turning right.
Unprotected left turns cross opposing traffic lanes and require yielding until a safe gap exists.

Key Concept

Unprotected Left Turn Right-of-Way Rules
Estimated Time:1m 0s
Question 2459Question

When driving past a row of parked vehicles on a city street, seeing exhaust smoke emerging from a vehicle's tailpipe serves as an early visual indicator that the vehicle is running and may pull out into traffic or open a door unexpectedly.

Show answer & explanation

Answer: True

Answer

True
The statement is true because defensive driving relies on scanning for early warnings such as exhaust fumes, reverse lights, or turned front wheels, which indicate an occupied vehicle that could suddenly merge or open a door.

Step-by-Step Solution

1
Scan the environment for visual clues indicating active vehicles.
Exhaust smoke or brake lights confirm that a driver is inside an operating vehicle.
Early hazard identification depends on detecting subtle indicators before a physical threat materializes.
2
Anticipate potential driver actions from the parked vehicle.
The vehicle might pull away from the curb, reverse, or have its door opened into your lane.
Defensive driving requires anticipating potential conflicts to maintain an adequate time and space buffer.

Key Concept

Recognizing early visual cues of occupied vehicles to anticipate potential road hazards
Estimated Time:45s
Question 2460Question

Three drivers approach a four-way intersection controlled by stop signs on all four approaches. Vehicle 1 arrives at the intersection first and intends to turn left. Shortly after Vehicle 1 stops, Vehicle 2 and Vehicle 3 arrive at the intersection at the exact same time. Vehicle 2 intends to travel straight through, while Vehicle 3 is positioned to the right of Vehicle 2 and also intends to travel straight through. In what order should these vehicles proceed through the intersection?

Drag items to arrange them in the correct order

Show answer & explanation

Answer

Vehicle 1 proceeds first, followed by Vehicle 3, and finally Vehicle 2.
Vehicle 1 has first priority because it was the first vehicle to arrive and stop at the multi-way stop intersection. For the two vehicles arriving simultaneously after Vehicle 1, right-of-way rules specify that the vehicle on the left must yield to the vehicle on the right. Because Vehicle 3 is to the right of Vehicle 2, Vehicle 3 proceeds second, leaving Vehicle 2 to proceed last.

Step-by-Step Solution

1
Determine initial priority based on arrival time at a multi-way stop.
Vehicle 1 proceeds first.
At a multi-way stop intersection, the first vehicle to reach a complete stop has the right-of-way to enter the intersection first.
2
Apply the yield-to-the-right rule for the remaining vehicles that arrived simultaneously.
Vehicle 3 proceeds second.
When two drivers stop at an intersection at the exact same time, the driver on the left must yield the right-of-way to the driver on the right.
3
Assign final right-of-way position to the yielding driver.
Vehicle 2 proceeds third (last).
Vehicle 2 is positioned on the left relative to Vehicle 3 and must yield until Vehicle 3 finishes crossing.

Key Concept

Multi-way stop precedence order and the yield-to-right rule for simultaneous arrival
Estimated Time:1m 15s
PreviousPage 123 / 127Next
All practice questions — DMV Permit Practice Test | Examkin