Examkin

Soru

Zorluk: KolaySwitches and Relays

In an electromechanical relay, which internal component creates the magnetic field needed to pull the movable armature and actuate the electrical contacts?

  1. A
    A thermal bimetallic strip
  2. An electromagnetic wire coilCevap
  3. C
    A dielectric ceramic barrier
  4. D
    An electrostatic storage plate

Cevap

An electromagnetic wire coil creates the magnetic field that pulls the armature to actuate the contacts in an electromechanical relay.
An electromechanical relay consists of an insulated wire coil wound around a ferromagnetic core. When a control current passes through this coil, it produces an electromagnetic field that pulls the hinged iron armature, physically shifting the contact positions to open or close the circuit.

Adım Adım Çözüm

1
Identify the operating mechanism of an electromechanical relay.
An electromechanical relay uses an electrical control signal to produce mechanical motion via magnetic force.
Relays use electromagnetism to allow a low-power circuit to open or close a separate electrical circuit.
2
Determine which component generates the magnetic force within the relay.
An insulated wire wrapped around an iron core forms an electromagnetic coil that produces magnetic flux when energized.
When current flows through the coil, the resulting magnetic attraction pulls the movable iron armature toward the core, changing the position of the contacts.

Anahtar Kavram

Electromechanical relay coil operation and magnetic contact actuation
Tahmini Süre:45s
Bu soruyu puanla

Konular

Switches and Relays

Bu konudan daha fazla soru