Tüm alıştırma soruları

Soru 2541Soru →

In automotive and carpentry workshops, selecting the appropriate hand saw depends on blade geometry, frame architecture, and material compatibility. Match each hand saw to its defining structural feature and primary workshop application.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Backsaw pairs with the rigid-spine design for fine woodworking joints; Coping Saw pairs with the deep C-frame and rotatable blade for cutting intricate curves; Keyhole Saw pairs with the narrow unsupported blade for plunge-cutting from drilled holes; Hacksaw pairs with the tensioned high-TPI frame for cutting metal stock.

Each saw is engineered for distinct mechanical requirements: the backsaw incorporates a rigid top spine for straight joinery; the coping saw features a flexible tensioned blade in a deep frame for curved profiling; the keyhole saw utilizes a tapered unsupported blade for interior access through small holes; and the hacksaw utilizes high-TPI blades in an adjustable frame for severing metals.

Adım Adım Çözüm

1

Analyze the structural spine reinforcement feature

Identify that the heavy reinforcement strip along the blade top belongs to the backsaw, preventing deflection during joinery work.

A reinforced back provides maximum blade rigidity for accurate, straight cutting in joinery.

2

Examine the tensioned C-frame curve-cutting tool

Identify that the deep steel C-frame holding a narrow, rotatable blade is a coping saw.

Coping saws are specifically built to turn sharp corners and clear workpieces when cutting molding joints.

3

Differentiate between metal-cutting and piercing hand tools

Match the narrow, tapered blade without an overhead frame to the keyhole saw, and the adjustable tension frame with forward-facing teeth to the hacksaw.

Keyhole saws access restricted interior openings through pilot holes, whereas hacksaws cut through dense metallic cross-sections.

Anahtar Kavram

Hand saw classification, structural design features, and material-specific cutting mechanics.

Tahmini Süre:1m 15s

Soru 2542Soru →

A civil engineer is designing a railroad crossing where a straight diagonal track intersects two parallel roads. The two same-side interior angles between the parallel roads and the track are represented by the algebraic expressions $(4x - 20)^\circ$ and $(3x + 25)^\circ$ . Based on the geometric properties of parallel lines intersected by a transversal, match each description on the left with its correct calculated numerical value on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The correct matches are: the value of x is 25, the acute angle is 80°, the obtuse angle is 100°, and the difference between them is 20°.

Same-side interior angles formed by parallel lines and a transversal are supplementary, meaning they add up to 180 degrees. Setting up the equation (4x - 20) + (3x + 25) = 180 allows us to solve for x, which equals 25. Substituting x = 25 back into the original expressions provides the individual angle measures: 80 degrees (acute) and 100 degrees (obtuse). Finally, subtracting the acute angle from the obtuse angle yields a difference of 20 degrees.

Adım Adım Çözüm

1

Set up an equation based on the geometric relationship of the angles.

(4x - 20) + (3x + 25) = 180

When a transversal intersects parallel lines, same-side interior angles are supplementary, meaning their sum is exactly 180 degrees.

2

Solve the algebraic equation to find the value of x.

7x + 5 = 180 \rightarrow 7x = 175 \rightarrow x = 25

Combining the like terms and isolating x provides the necessary variable value to determine the actual angle measures.

3

Substitute the value of x back into the original expressions.

4(25) - 20 = 80^\circ

and

3(25) + 25 = 100^\circ

This calculation determines the specific measures of the acute and obtuse angles formed at the intersection.

4

Calculate the difference between the obtuse and acute angle measures.

100^\circ - 80^\circ = 20^\circ

This satisfies the final required numerical value for the matching pairs.

Anahtar Kavram

Properties of parallel lines intersected by a transversal, specifically that same-side interior angles are supplementary.

Soru 2543Soru →

A specialized clamping arm on a manufacturing machine operates as a straight lever, hinged at one end to a fixed support. A pneumatic actuator is attached to the arm $0.4 \text{ m}$ away from the hinge, applying a downward effort force. The arm presses down onto a workpiece located $2.0 \text{ m}$ from the hinge. The workpiece exerts an upward resistance of $400 \text{ N}$ against the arm.

Assuming the arm is level and its weight is negligible, what downward force must the actuator apply to hold the arm steady, and what class of lever does this mechanism represent?

2000 \text{ N}

; Third-class lever

2000 \text{ N}

; Second-class lever

1600 \text{ N}

; Third-class lever

80 \text{ N}

; Third-class lever

Cevabı ve açıklamayı göster

Cevap: $2000 \text{ N}$ ; Third-class lever

Cevap

The actuator must apply

2000 \text{ N}

of force, and the mechanism represents a third-class lever.

The correct answer accurately classifies the setup as a third-class lever because the effort (actuator) is located between the fulcrum (hinge) and the load (workpiece). To maintain equilibrium, the moments around the hinge must balance. The load creates a moment of

400 \text{ N} \times 2.0 \text{ m} = 800 \text{ N}\cdot\text{m}

. The actuator must create an equal moment:

F_e \times 0.4 \text{ m} = 800 \text{ N}\cdot\text{m}

. Solving for

F_e

gives

2000 \text{ N}

.

Adım Adım Çözüm

1

Identify the positions of the fulcrum, effort, and load to determine the lever class.

Third-class lever.

The hinge is the fulcrum at one end (0.0 m), the actuator is the effort (0.4 m), and the workpiece is the load (2.0 m). Because the effort is applied between the fulcrum and the load, it is a third-class lever.

2

Set up the torque balance equation (Principle of Moments).

F_e \times 0.4 \text{ m} = 400 \text{ N} \times 2.0 \text{ m}

For the lever to be held steady, the torque generated by the effort force must perfectly balance the torque generated by the load resistance around the fulcrum.

3

Solve the equation for the unknown effort force (

F_e

).

F_e = 2000 \text{ N}

Evaluating

(400 \times 2.0) / 0.4

yields

800 / 0.4 = 2000 \text{ N}

.

Anahtar Kavram

Lever classifications and torque balance in simple machines

Tahmini Süre:1m 0s

Soru 2544Soru →

An automotive technician must select the appropriate wrench for various shop tasks. Match each specialized wrench type to its correct mechanical application.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Flare-nut (line) wrench matches turning soft metal hydraulic brake line fittings; Torque wrench matches applying precise calibrated rotational tension; Crowfoot wrench matches accessing recessed fasteners via a ratchet extension; Hex (Allen) wrench matches turning internal six-sided recessed socket fasteners.

Each wrench is specifically engineered for its matching task: the flare-nut wrench provides maximum surface contact on soft fluid line nuts, the torque wrench ensures critical fasteners are tightened to calibrated limits, the crowfoot wrench extends reach into obstructed compartments when paired with drive tools, and the hex wrench engages internal drive sockets.

Adım Adım Çözüm

1

Analyze the mechanical design features of each wrench type.

Flare-nut wrenches enclose tubing fittings with high contact area; torque wrenches contain internal measurement mechanisms for calibrated tension; crowfoot wrenches provide an open-head drive for ratchet extensions; hex wrenches engage internal female hexagonal sockets.

Matching tool drive geometry to fastener design prevents mechanical damage and ensures proper tightening.

2

Pair each specialized tool with its designated shop task.

All four specialized wrenches are accurately mapped to their specific automotive use cases.

Using the correct wrench ensures shop safety, prevents stripped fasteners, and meets engineering torque specifications.

Anahtar Kavram

Matching specialized wrench profiles and drive mechanisms to specific automotive fastener geometries and torque requirements.

Tahmini Süre:1m 0s

Soru 2545Soru →

A drone is tethered to a fixed landing pad and can fly within a maximum circular boundary with an area of $400\pi$ square meters. If a safety protocol requires the tether to be shortened by $8$ meters, what is the maximum area of the new circular flight boundary?

144\pi \text{ square meters}

256\pi \text{ square meters}

336\pi \text{ square meters}

24\pi \text{ square meters}

Cevabı ve açıklamayı göster

Cevap: $144\pi \text{ square meters}$

Cevap

The new flight boundary has an area of

144\pi \text{ square meters}

.

The initial area of

400\pi

square meters indicates the original tether length (radius) was

20

meters, because

\pi r^2 = 400\pi

. Shortening the tether by

8

meters results in a new radius of

12

meters. The new area is calculated by squaring the new radius and multiplying by

\pi

, yielding

\pi(12)^2 = 144\pi

square meters.

Adım Adım Çözüm

1

Find the original radius using the area formula

A = \pi r^2

.

400\pi = \pi r^2

, so

r^2 = 400

, which means

r = 20

meters.

The original tether length represents the radius of the circular boundary.

2

Calculate the new radius by subtracting

8

meters.

20 - 8 = 12

meters.

The safety protocol shortens the tether, directly reducing the flight radius.

3

Calculate the area of the new circular boundary.

A = \pi(12)^2 = 144\pi \text{ square meters}

.

The problem asks for the maximum area of the new boundary.

Anahtar Kavram

Area of a circle and its relationship to the radius.

Soru 2546Soru →

During woodworking and metalworking operations, the teeth on many hand saw blades are intentionally offset alternately to the left and right. What is the primary operational purpose of this tooth set?

It cuts a kerf wider than the blade body to prevent friction and binding in the cut

It configures the blade exclusively for ripping parallel along the wood grain lines

It increases the tooth count per inch to achieve a glass-smooth finish

It restricts the cutting action solely to the backward pull stroke of the saw

Cevabı ve açıklamayı göster

Cevap: It cuts a kerf wider than the blade body to prevent friction and binding in the cut

Cevap

The primary operational purpose of tooth set is to create a kerf wider than the blade body to prevent friction and binding in the cut.

The correct answer explains the mechanical function of tooth set. By bending alternating teeth outward, the resulting slot (kerf) is wider than the steel blade plate, preventing the blade from binding or sticking due to friction and wood tension.

Adım Adım Çözüm

1

Analyze the physical design of saw tooth set.

Tooth set refers to bending adjacent teeth alternately in opposite lateral directions (left and right) away from the centerline of the blade plate.

Understanding blade geometry is essential to identify the functional purpose of specific manufacturing features.

2

Evaluate the mechanical interaction between the saw blade and the workpiece during cutting.

As the saw cuts, the set teeth clear a slot (the kerf) that is wider than the thickness of the blade body, ensuring the sides of the blade do not rub against the walls of the wood or metal.

Without this clearance, friction causes the blade to bind, overheat, and wander off the cutline.

Anahtar Kavram

Saw Tooth Set and Kerf Clearance

Tahmini Süre:1m 0s

Soru 2547Soru →

An industrial machinery mount is assembled using standard fractional fasteners with bolt heads measuring $3/4\text{ in}$ . Which tool must be selected to turn these fasteners securely and prevent rounding the bolt heads?

A

19\text{ mm}

box-end wrench

A

3/4\text{ in}

box-end wrench

A

20\text{ mm}

combination wrench

An

18\text{ mm}

open-end wrench

Cevabı ve açıklamayı göster

Cevap: A $3/4\text{ in}$ box-end wrench

Cevap

A

3/4\text{ in}

box-end wrench

Fasteners must be turned with a wrench of the matching measurement standard and exact size. A

3/4\text{ in}

box-end wrench matches the

3/4\text{ in}

(

0.750\text{ in}

) bolt head perfectly, while the closed box end surrounds the fastener to distribute torque evenly and prevent rounded corners.

Adım Adım Çözüm

1

Identify the fastener measurement system and exact head size specified.

The fastener is standard fractional SAE measuring

3/4\text{ in}

(

0.750\text{ in}

).

Fasteners must always be paired with wrenches manufactured in the same measurement standard to ensure an exact fit.

2

Evaluate potential metric substitutes against the exact SAE dimension.

18\text{ mm} \approx 0.709\text{ in}

(too small),

19\text{ mm} \approx 0.748\text{ in}

(undersized by

0.002\text{ in}

), and

20\text{ mm} \approx 0.787\text{ in}

(oversized by

0.037\text{ in}

).

Metric wrenches do not perfectly match fractional inch sizes, leading to improper seating, slippage, and fastener damage.

3

Select the proper tool design and size to apply torque without fastener damage.

A

3/4\text{ in}

box-end wrench provides full perimeter contact and the exact required dimension.

Using the matching SAE size in a box-end configuration distributes torque evenly across all six points of the fastener.

Anahtar Kavram

Proper SAE Wrench Sizing and Metric Non-Interchangeability

Tahmini Süre:1m 0s

Soru 2548Soru →

A carpenter needs to make a plunge (pocket) cut into the middle of a subfloor panel using a portable circular saw. In what order should the operational and safety steps be performed?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

Rest front shoe on workpiece -> Retract lower guard with lever -> Start motor and reach full speed -> Pivot saw downward into material -> Push forward along cut line and allow blade to stop before lifting

Safely making a plunge (pocket) cut with a portable circular saw requires first resting the front of the shoe on the workpiece to establish a pivot point, manually retracting the lower guard with its lever, bringing the motor to full operating RPM before contact, pivoting the spinning blade slowly downward until the shoe is flat, and finally feeding forward to the endpoint and letting the blade stop completely before lifting the saw.

Adım Adım Çözüm

1

Position the front lip of the saw shoe firmly against the panel surface directly over the cut line with the blade elevated.

A secure pivot axis is established, preventing accidental contact before the cut begins.

Starting with a secure shoe placement prevents the saw from drifting off the layout line.

2

Use the guard retracting lever to pull back the lower blade guard.

The lower blade teeth are exposed for entry from above.

In internal pocket cuts, the workpiece cannot automatically push the guard open.

3

Squeeze the trigger switch to bring the blade up to full rotational speed.

The motor reaches maximum RPM and cutting torque.

Plunging into stock with a slow or stationary blade causes aggressive grabbing, stalling, and violent kickback.

4

Carefully lower the rear handle, pivoting the spinning blade down through the stock until the base plate rests flat.

The blade safely penetrates the entire thickness of the board along the cut mark.

Pivoting on the front shoe provides leverage and control against tool climb.

5

Advance the saw forward to the end of the line, release the power switch, and wait for complete rotation stoppage before lifting the saw.

The cut is completed cleanly without workpiece marring or safety hazard.

Lifting a running blade out of a blind kerf risks catching the timber and throwing the tool backward.

Anahtar Kavram

Circular Saw Plunge (Pocket) Cut Safety and Procedure

Tahmini Süre:1m 30s

Soru 2549Soru →

While making rip cuts through $3/4$ -inch plywood decking using a handheld circular saw, a carpenter notices severe motor bogging, blade binding, and repeated violent kickback tendencies despite operating a sharp, clean blade. Upon inspection of the saw setup, which improper blade adjustment is the primary cause of these symptoms?

The blade depth is set to extend several inches beyond the underside of the workpiece, creating an excessively steep tooth attack angle and high friction.

The blade depth is calibrated so that the lowest tooth tip extends exactly

1/8

inch below the bottom face of the plywood sheet.

The saw shoe base is locked parallel to the arbor shaft without any bevel tilt angle applied.

The tool is operated using an approved, grounded three-prong electrical cord rated for heavy continuous duty.

Cevabı ve açıklamayı göster

Cevap: The blade depth is set to extend several inches beyond the underside of the workpiece, creating an excessively steep tooth attack angle and high friction.

Cevap

Setting the blade depth to extend several inches below the underside of the stock causes an excessively steep tooth angle and high friction, resulting in binding and kickback.

Setting the blade excessively deep below the material thickness causes the teeth to enter at a steep angle, which increases the upward rotational force against the workpiece, induces kerf pinching, and creates severe kickback risk while bogging down the motor.

Adım Adım Çözüm

1

Analyze the mechanical forces and cutting geometry of a circular saw blade in sheet stock.

Excessive blade extension beneath the stock causes the blade teeth to strike the material at a nearly perpendicular angle rather than a smooth, low-angle shearing trajectory.

Cutting geometry dictates that steeper blade angles transfer rotational kinetic energy upward into the tool body rather than forward through the cut line.

2

Evaluate the effect of excessive blade exposure on surface contact and motor load.

More blade body and gullet area contact the kerf walls, generating extreme frictional heat, gumming, pinching, and motor bogging.

Frictional resistance increases directly with the surface area of the blade buried inside and below the kerf.

3

Identify the standard rule for proper circular saw depth adjustment.

The blade should extend only

1/8

to

1/4

inch (or roughly one full tooth depth) beneath the bottom of the workpiece.

This optimal exposure ensures clean chip ejection, minimizes exposed spinning surface area, and prevents dangerous binding.

Anahtar Kavram

Circular Saw Blade Depth and Kickback Dynamics

Tahmini Süre:1m 30s

Soru 2550Soru →

Match each left-side puzzle component (1-4) with its exact complementary right-side component (A-D) that will interlock seamlessly to form a perfect solid rectangle. The mating edges are vertical and their profiles are described sequentially from top to bottom.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Component 1 pairs with Component C; Component 2 pairs with Component D; Component 3 pairs with Component A; Component 4 pairs with Component B.

For two irregular pieces to form a seamless rectangle without rotation, the mating edge of the right piece must be the exact spatial inverse of the left piece's mating edge. Every protrusion on the left component must meet a corresponding recess of identical shape, size, and location on the right component, and vice versa.

Adım Adım Çözüm

1

Analyze the edge profile of Component 1 from top to bottom.

Identified a sequence of a triangular notch, a flat segment, and a small semi-circular tab.

Establishing the sequence of features is required to find the exact inverse complement.

2

Search the right-side components for the inverse of Component 1's profile.

Component C provides the exact inverse: a triangular tab (to fill the notch), a flat segment, and a small semi-circular notch (to receive the tab).

A seamless fit requires every recess to have a corresponding protrusion of the exact same shape and size.

3

Analyze Component 2 and locate its inverse.

Component 2 has zigzag tabs and a square notch; Component D has the matching zigzag notches and a square tab.

Matching the sharp angular features precisely ensures the geometry locks together correctly without collisions.

4

Analyze Component 3 and locate its inverse.

Component 3 has a large semi-circular recess and angled tab; Component A has the matching large semi-circular tab and angled notch.

The large curved feature and angular tab pair uniquely with their exact inverse.

5

Confirm the remaining pair (Component 4 and Component B).

Component 4's sequence of wide/narrow tabs and wide recess perfectly complements Component B's wide/narrow recesses and wide tab.

Verifying the final pairing ensures no sequence matching errors were made in previous steps.

Anahtar Kavram

Identifying complementary inverse shapes for irregular edge assembly.

Alternatif Yöntem

Mentally draw the 'negative space' along the right edge of each left-side component. This imaginary shape represents the exact profile you must search for among the right-side components.

Tahmini Süre:1m 30s

Soru 2551Soru →

A technician uses a pair of long industrial tweezers to securely hold a sensitive electronic component. The tweezers pivot at the joined top end and have a total length of $40 \text{ cm}$ from the pivot to the gripping tips. The technician's fingers apply pressure at a point $8 \text{ cm}$ from the pivot. If the component requires a holding force of $50 \text{ N}$ at the tips, what effort force (in Newtons) must the technician apply?

Cevabı ve açıklamayı göster

Cevap: 250

Cevap

The technician must apply an effort force of 250 N.

In a third-class lever like tweezers, the effort is applied between the fulcrum and the load. Since the effort arm (

8 \text{ cm}

) is shorter than the load arm (

40 \text{ cm}

), the mechanical advantage is less than 1. This means a much larger effort force is required to generate a smaller load force at the tips. Using the torque balance equation

F_e \times d_e = F_l \times d_l

, we get

F_e \times 8 = 50 \times 40

. Solving this gives

250 \text{ N}

.

Adım Adım Çözüm

1

Identify the lever configuration and its parameters.

The tweezers are a third-class lever (fulcrum at one end, effort in the middle). Effort arm

d_e = 8 \text{ cm}

, load arm

d_l = 40 \text{ cm}

, load force

F_l = 50 \text{ N}

.

Correctly identifying the lever class ensures the correct distances are used relative to the fulcrum.

2

Set up the torque equilibrium equation.

F_e \times d_e = F_l \times d_l

For the lever to remain stable and provide the required grip, the effort torque must balance the load torque.

3

Calculate the required effort force.

F_e \times 8 = 50 \times 40 \Rightarrow 8 F_e = 2000 \Rightarrow F_e = 250 \text{ N}

To find the unknown variable by substituting the given values.

Anahtar Kavram

Torque Balance in Third-Class Levers

Soru 2552Soru →

An isosceles triangle has two equal sides that each measure $13$ inches and a base that measures $10$ inches. What is the length of the altitude (height) drawn to the base?

8

inches

36

inches

12

inches

18

inches

Cevabı ve açıklamayı göster

Cevap: $12$ inches

Cevap

The length of the altitude is

12

inches.

Drawing an altitude to the base of an isosceles triangle splits it into two identical right triangles. The base of

10

inches is bisected into two

5

-inch segments. For one of these right triangles, the base leg is

5

inches and the hypotenuse (the equal side) is

13

inches. Using the Pythagorean theorem (

a^2 + b^2 = c^2

), we set up the equation

h^2 + 5^2 = 13^2

. Solving for

h^2

gives

169 - 25 = 144

. Taking the square root of

144

yields an altitude of

12

inches.

Adım Adım Çözüm

1

Identify the properties of an altitude in an isosceles triangle.

The altitude bisects the

10

-inch base, creating two equal segments of

5

inches each.

This splits the isosceles triangle into two congruent right triangles, allowing the use of the Pythagorean theorem.

2

Set up the Pythagorean theorem (

a^2 + b^2 = c^2

) for one of the right triangles.

h^2 + 5^2 = 13^2

, where

h

is the altitude,

5

is the base leg, and

13

is the hypotenuse.

The equal side of the isosceles triangle serves as the hypotenuse of the newly formed right triangle.

3

Square the known values.

h^2 + 25 = 169

.

To begin isolating the unknown altitude squared (

h^2

).

4

Solve for the altitude.

h^2 = 169 - 25 = 144

, so

h = \sqrt{144} = 12

.

Taking the square root of

144

gives the final length of the altitude.

Anahtar Kavram

Using the Pythagorean theorem to find the altitude of an isosceles triangle

Soru 2553Soru →

When cutting sharp, tight curves into a thick wooden workpiece on a stationary band saw, which procedure prevents the continuous blade from binding, overheating, or twisting off the wheels?

Making a series of straight relief cuts into the waste portion up to the layout line before sawing the contour

Replacing the narrow blade with a wide, coarse-toothed ripping blade to force the cut through the radius

Elevating the upper guide post several inches above the workpiece to give the blade greater lateral flexibility

Applying firm sideways pressure against the blade during the cut to push it through the curvature

Cevabı ve açıklamayı göster

Cevap: Making a series of straight relief cuts into the waste portion up to the layout line before sawing the contour

Cevap

Making a series of straight relief cuts into the waste portion up to the layout line before sawing the contour

Making straight relief cuts through the waste wood up to the layout line allows small chunks of scrap to fall away as the contour is cut. This relieves lateral pressure on the blade, keeps the kerf open, and prevents the blade from twisting, overheating, or binding in tight radii.

Adım Adım Çözüm

1

Identify the primary limitation when cutting curves on a stationary band saw

Recognize that a continuous saw blade cannot turn beyond a radius determined by its width without binding against the kerf walls.

Forcing a band saw blade around a radius tighter than its width specification causes friction, heat, tracking failure, and blade breakage.

2

Select the proper pre-cutting strategy for tight radius profiles

Saw straight relief cuts from the stock edge through the waste wood directly to the layout line at key turning points.

Relief cuts allow waste segments to fall away freely as the curved cut progresses, preventing kerf pinch and relieving lateral stress on the blade.

3

Evaluate why alternative operational approaches are dangerous or ineffective

Confirm that wider blades reduce turning radius capability, raising guide posts creates dangerous unsupported blade exposure, and lateral pushing twists the blade.

Adhering strictly to relief cutting and proper guide setup ensures clean cuts and safe machine operation.

Anahtar Kavram

Stationary band saw curve cutting techniques and relief cuts

Tahmini Süre:1m 0s

Soru 2554Soru →

A flat metal washer is manufactured by stamping a circular hole with a diameter of $4 \text{ mm}$ out of the exact center of a solid circular disk with a diameter of $12 \text{ mm}$ . What is the area of the remaining flat face of the washer in square millimeters? (Enter only the numerical coefficient of $\pi$ in your answer. For example, if the area is $50\pi$ , enter 50).

Cevabı ve açıklamayı göster

Cevap: 32

Cevap

32

The area of the remaining metal washer face is found by calculating the area of the large outer circle (

36\pi

) and subtracting the area of the smaller inner circle hole (

4\pi

), which leaves a remaining area of

32\pi

. Since the question asks for the coefficient of

\pi

, the correct numerical entry is 32.

Adım Adım Çözüm

1

Calculate the radius of the outer disk.

R = 12 \div 2 = 6 \text{ mm}

The area formula for a circle requires the radius, which is half of the diameter.

2

Calculate the area of the outer disk.

\text{Area}_{\text{outer}} = \pi \times 6^2 = 36\pi \text{ mm}^2

This represents the total surface area before the center hole is removed.

3

Calculate the radius of the inner hole.

r = 4 \div 2 = 2 \text{ mm}

The radius of the removed section is needed to determine how much area to subtract.

4

Calculate the area of the inner hole.

\text{Area}_{\text{inner}} = \pi \times 2^2 = 4\pi \text{ mm}^2

This is the area of the metal that is stamped out.

5

Subtract the inner area from the outer area.

36\pi - 4\pi = 32\pi \text{ mm}^2

The remaining face area of the washer is the difference between the full disk and the removed hole.

6

Identify the coefficient of

\pi

.

32

The stem specifically asks for the numerical coefficient only.

Anahtar Kavram

Calculating the area of an annulus (the region between two concentric circles) by subtracting the area of the inner circle from the area of the outer circle.

Soru 2555Soru →

A woodworker needs to cut several dimensional lumber boards to length by sawing perpendicular to the wood grain. Which hand saw is specifically designed with alternately beveled teeth that slice cleanly across the wood fibers?

Rip saw

Crosscut saw

Hacksaw

Coping saw

Cevabı ve açıklamayı göster

Cevap: Crosscut saw

Cevap

Crosscut saw

A crosscut saw is engineered specifically for cutting perpendicular to the wood grain. Its teeth are filed at alternating bevel angles so that each tooth acts like a miniature knife blade, slicing the wood fibers smoothly on alternating sides of the kerf to create a clean, tear-free cut.

Adım Adım Çözüm

1

Identify the cutting direction relative to the wood grain structure.

The task requires cutting perpendicular (across) the wood grain to trim boards to length.

Wood grain runs longitudinally, requiring different cutting mechanics depending on whether the cut is made with or across the grain.

2

Match the mechanical tooth design to the required cutting action.

Alternately beveled, knife-edge teeth slice across wood fibers cleanly to prevent tear-out.

Crosscut saw teeth are filed at an angle to create sharp points and knife edges that shear fibers on both sides of the cut line.

Anahtar Kavram

Crosscut saw tooth geometry and grain orientation

Tahmini Süre:1m 0s

Soru 2556Soru →

A military mechanic needs to lift an engine component that weighs $120 \text{ lbs}$ . Match each pulley system configuration to the ideal effort force required to lift the component.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Single fixed pulley matches

120 \text{ lbs}

; Single movable pulley matches

60 \text{ lbs}

; Block and tackle with 4 supporting strands matches

30 \text{ lbs}

.

The effort force is calculated by dividing the

120 \text{ lb}

load by the Ideal Mechanical Advantage (IMA) of each system: 1 for a single fixed pulley (

120 \text{ lbs}

), 2 for a single movable pulley (

60 \text{ lbs}

), and 4 for a 4-strand block and tackle (

30 \text{ lbs}

).

Adım Adım Çözüm

1

Determine the Ideal Mechanical Advantage (IMA) of the single fixed pulley.

IMA = 1.

A single fixed pulley only changes the direction of the force.

2

Calculate the effort force for the single fixed pulley.

120 \text{ lbs} / 1 = 120 \text{ lbs}

.

Effort = Load / IMA.

3

Determine the IMA of the single movable pulley.

IMA = 2.

A single movable pulley is supported by two rope sections, halving the required force.

4

Calculate the effort force for the single movable pulley.

120 \text{ lbs} / 2 = 60 \text{ lbs}

.

Effort = Load / IMA.

5

Determine the IMA of the block and tackle system with 4 supporting strands.

IMA = 4.

The number of supporting upward strands directly equals the IMA.

6

Calculate the effort force for the block and tackle system.

120 \text{ lbs} / 4 = 30 \text{ lbs}

.

Effort = Load / IMA.

Anahtar Kavram

The ideal effort force required to lift a load is the load divided by the Ideal Mechanical Advantage (IMA) of the pulley system.

Soru 2557Soru →

While servicing an imported compact vehicle, a technician must remove a stubborn $17\text{ mm}$ hex-head bellhousing bolt. Which tool should be used to safely loosen this fastener without rounding off its corners?

An

11/16\text{ in}

open-end wrench

A

17\text{ mm}

box-end wrench

A

5/8\text{ in}

combination wrench

A

3/4\text{ in}

box-end wrench

Cevabı ve açıklamayı göster

Cevap: A $17\text{ mm}$ box-end wrench

Cevap

A

17\text{ mm}

box-end wrench

The

17\text{ mm}

box-end wrench is specifically engineered for metric hardware of that dimension. Its enclosed ring contacts all six (or twelve) points of the hex head, providing maximum contact area and eliminating the slop that causes fastener damage.

Adım Adım Çözüm

1

Identify the fastener measurement system and size

The fastener is metric with a nominal head dimension of

17\text{ mm}

(

17.00\text{ mm} \approx 0.669\text{ in}

).

Metric fasteners require dedicated metric tooling to ensure zero tolerance gap.

2

Evaluate the exact dimensions of fractional SAE alternatives

An

11/16\text{ in}

wrench equals

17.46\text{ mm}

,

5/8\text{ in}

equals

15.88\text{ mm}

, and

3/4\text{ in}

equals

19.05\text{ mm}

.

Interchanging SAE fractional tools on metric fasteners introduces dimensional mismatches.

3

Select the correct tool size and profile for high-torque removal

The

17\text{ mm}

box-end wrench provides exact sizing and continuous contact around all hex points.

Matching the metric size exactly prevents rounding corners, and a box-end design provides superior grip compared to an open-end wrench.

Anahtar Kavram

Metric vs. SAE Wrench Sizing and Fastener Fitment

Tahmini Süre:1m 0s

Soru 2558Soru →

In automotive and mechanical metalworking, different specialized cold chisel profiles are engineered to cut specific shapes and channels in metal components. Match each specialized cold chisel type with its primary machining function.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Cape chisel matches with cutting narrow flat-bottomed rectangular slots and machining keyways; Diamond point chisel matches with cutting sharp V-shaped grooves and cleaning out square inside corners; Round nose chisel matches with cutting semicircular grooves and machining internal bearing oil channels; Flat cold chisel matches with general shearing of unhardened sheet metal, cutting rivet shanks, and splitting frozen nuts.

Each cold chisel profile corresponds directly to a specific geometric cut: the cape chisel creates narrow flat-bottomed keyway slots; the diamond point chisel forms sharp V-shaped corners; the round nose chisel forms curved oil grooves; and the standard flat cold chisel performs broad chipping and shearing.

Adım Adım Çözüm

1

Identify the tip profile and primary purpose of the cape chisel.

The cape chisel has a narrow flat blade tailored for keyways and narrow straight slots.

Its profile prevents binding when cutting deep, narrow slots in metal.

2

Identify the profile and machining function of the diamond point chisel.

The diamond point chisel has a faceted point for V-grooves and internal acute corners.

The triangular/diamond profile concentrates force to produce clean angular cuts.

3

Identify the geometry and purpose of the round nose chisel.

The round nose chisel has a convex, radiused tip for semicircular cuts and oil grooves.

The radius allows smooth cutting of circular cross-section channels without gouging sharp stress risers.

4

Identify the standard use of the flat cold chisel.

The flat chisel is the general-purpose tool for shearing rivets, trimming plate, and splitting fasteners.

The wide straight edge distributes impact force along a flat cutting line.

Anahtar Kavram

Classification and functional application of specialized cold chisel blade geometries in metalworking.

Tahmini Süre:1m 0s

Soru 2559Soru →

An operator plans to bore a 1/4-inch hole into a block of hardwood and then a 1/4-inch hole into a plate of alloy steel using a drill press. Which adjustment to the spindle speed should be made when switching from the hardwood to the steel workpiece?

Maintain the identical spindle speed since spindle velocity on a drill press is determined strictly by drill bit diameter, not workpiece material.

Decrease the spindle speed because harder materials require slower surface speeds to avoid overheating and dulling the drill bit.

Increase the spindle speed to maximum RPM so the cutting flutes can penetrate the harder material quickly.

Operate at maximum spindle speed while reducing feed pressure to let the cutting tip slowly grind away the metal.

Cevabı ve açıklamayı göster

Cevap: Decrease the spindle speed because harder materials require slower surface speeds to avoid overheating and dulling the drill bit.

Cevap

Decrease the spindle speed because harder materials require slower surface speeds to avoid overheating and dulling the drill bit.

On a drill press, the correct spindle speed (RPM) is determined by both the bit diameter and the hardness of the workpiece material. Softer materials like wood, plastics, and aluminum can be drilled safely at higher speeds. In contrast, harder materials such as alloy steel require significantly lower spindle speeds to limit friction and heat buildup, which would otherwise anneal and dull the cutting edges of the drill bit.

Adım Adım Çözüm

1

Identify the primary operational factors that dictate drill press spindle speed.

Spindle speed (RPM) depends on both drill bit diameter and the hardness/machinability of the workpiece material.

Cutting tools operate within recommended surface feet per minute (SFM) ratings specific to the material being drilled.

2

Compare the cutting characteristics and thermal limits of hardwood versus alloy steel.

Hardwood is soft and dissipates heat readily at higher speeds, whereas alloy steel offers high resistance and concentrates extreme heat at the cutting lips.

Harder materials require lower linear surface speeds to prevent thermal breakdown of the tool steel.

3

Determine the necessary drill press spindle speed adjustment when transitioning between materials.

The spindle speed must be shifted to a lower RPM setting for alloy steel compared to hardwood.

Lowering the speed prevents overheating, tool dulling, and workpiece glazing while allowing proper chip ejection.

Anahtar Kavram

Drill Press Spindle Speed Selection by Material Hardness

Tahmini Süre:1m 0s

Soru 2560Soru →

A technician is filing the flat edge of a mild steel plate clamped in a bench vise. After several strokes, the file begins to slip across the steel without biting, leaving deep, irregular scratches on the workpiece surface. What is the cause of this problem, and what corrective action should be taken?

The file teeth have lost their hardness; reheat the tool with a torch and quench it in oil to restore the temper.

The file is being pushed too slowly; apply heavy downward pressure on both the forward push and backward return strokes.

Metal particles have packed tightly between the teeth (pinning); dislodge the debris by brushing across the face with a file card.

The workpiece surface is too dry; coat the file teeth thoroughly with motor oil before continuing the filing operation.

Cevabı ve açıklamayı göster

Cevap: Metal particles have packed tightly between the teeth (pinning); dislodge the debris by brushing across the face with a file card.

Cevap

Metal particles have packed tightly between the teeth (pinning); dislodge the debris by brushing across the face with a file card.

When metal filings become wedged between the cutting teeth of a file, the condition is known as 'pinning.' Pinned chips prevent the file from cutting cleanly and leave deep gouges on the workpiece. The correct shop remedy is to clear the teeth using a file card with wire bristles pulled in the direction of the tooth angle.

Adım Adım Çözüm

1

Diagnose the cause of the file slipping and scratching the workpiece.

Identify that metal particles have become wedged into the gullets between the file teeth, a condition known as pinning.

When chips accumulate in the tooth spaces, the cutting edges cannot penetrate the metal, causing the tool to skate over the workpiece while the trapped pins gouge the surface.

2

Select the proper tool and technique for clearing the clogged file teeth.

Use a specialized file card and draw its wire bristles across the file face parallel to the rows of teeth.

Brushing in line with the tooth grooves extracts the compacted metal pins without damaging the cutting edges.

Anahtar Kavram

File maintenance, pinning identification, and file card application

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Alternatif Yöntem

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm