Tüm alıştırma soruları

Soru 1Soru →

A medical equipment technician is compensated with both an hourly wage and a tiered commission. The technician earns a base rate of $24.00 per hour for a standard 40-hour workweek, and time-and-a-half for any hours worked beyond 40. Additionally, the technician earns a 6% commission on all service contracts sold up to$ 5,000 in a week, and an 8% commission on the portion of sales exceeding $5,000. If the technician worked 46 hours and sold$ 8,500 in service contracts last week, what were the technician's total gross earnings?

$1,856.00

$1,684.00

$1,234.00

$1,756.00

Cevabı ve açıklamayı göster

Cevap: $1,756.00

Cevap

The technician's total gross earnings for the week were $1,756.00.

The correct answer is found by calculating each component of the compensation structure and summing them. Regular pay is 40 hours at

24.00/hour (

960.00). Overtime pay is 6 hours at the time-and-a-half rate of

36.00/hour (

216.00). The tiered commission is calculated as 6% of the first

5,000 (

300.00) plus 8% of the remaining

3,500 in sales (

280.00). Adding these components together (

960.00 +

216.00 +

300.00 +

280.00) results in total gross earnings of $1,756.00.

Adım Adım Çözüm

1

Calculate the regular base pay.

40 hours \times

24.00/hour =

960.00

The technician is paid the base rate for the first 40 hours worked.

2

Calculate the overtime pay.

6 hours \times (

24.00 \times 1.5) = 6 \times

36.00 = $216.00

The 6 hours worked beyond the standard 40 hours are paid at time-and-a-half.

3

Calculate the first tier of commission.

5,000 \times 0.06 =

300.00

The technician earns a 6% commission on the first $5,000 of service contracts sold.

4

Calculate the second tier of commission.

(

8,500 -

5,000) \times 0.08 =

3,500 \times 0.08 =

280.00

The technician earns an 8% commission on any sales amount exceeding the initial $5,000.

5

Calculate total gross earnings.

960.00 +

216.00 +

300.00 +

280.00 = $1,756.00

Total gross earnings are the sum of regular pay, overtime pay, and all commission tiers.

Anahtar Kavram

Calculating gross earnings involving overtime premiums and multi-tiered commission structures.

Soru 2Soru →

A naval destroyer traveling at an average speed of $24\text{ knots}$ completes a specific patrol route in $3\text{ hours}$ and $20\text{ minutes}$ . If the captain is ordered to complete the identical route in $2\text{ hours}$ and $30\text{ minutes}$ , what average speed must the destroyer maintain?

18\text{ knots}

32\text{ knots}

16\text{ knots}

3.2\text{ knots}

Cevabı ve açıklamayı göster

Cevap: $32\text{ knots}$

Cevap

The destroyer must maintain an average speed of

32\text{ knots}

.

The distance of the patrol route is constant, meaning the product of the initial speed and time must equal the product of the new speed and time. Converting the travel times completely to minutes gives

200\text{ minutes}

and

150\text{ minutes}

. Using the inverse proportion formula,

24 \times 200 = 4800

. Dividing this constant by the required new time of

150\text{ minutes}

gives the necessary speed of

32\text{ knots}

.

Adım Adım Çözüm

1

Convert both time durations entirely into minutes to ensure consistent units.

3\text{ hours and } 20\text{ minutes} = 200\text{ minutes}

, and

2\text{ hours and } 30\text{ minutes} = 150\text{ minutes}

.

Calculations involving mixed time units require a single common unit before a proportion can be accurately applied.

2

Identify the relationship between speed and time for a constant distance.

Speed and time are inversely proportional, governed by the equation

S_1 \times T_1 = S_2 \times T_2

.

When the distance of a route remains the same, an increase in speed results in a proportional decrease in travel time.

3

Set up the inverse proportion equation and solve for the new speed (

S_2

).

24 \times 200 = S_2 \times 150 \implies 4800 = 150 \times S_2 \implies S_2 = 32

.

Isolating the unknown variable yields the required average speed to complete the route in the shorter timeframe.

Anahtar Kavram

Inverse Proportions in Speed and Time

Tahmini Süre:1m 30s

Soru 3Soru →

Consider the algebraic expression: $3x^2 + 6x - 24$ . When this expression is factored completely, which of the following represents the correct product?

3(x + 4)(x - 2)

3(x - 4)(x + 2)

(3x + 12)(x - 2)

3(x + 4)(x + 2)

Cevabı ve açıklamayı göster

Cevap: $3(x + 4)(x - 2)$

Cevap

The completely factored form is

3(x + 4)(x - 2)

.

To factor the expression completely, you must first factor out the greatest common factor (GCF) of 3 from all terms. This leaves

3(x^2 + 2x - 8)

. Next, you factor the quadratic trinomial inside the parentheses. You need two numbers that multiply to -8 and add to +2. Those numbers are +4 and -2. Therefore, combining the GCF and the binomials gives the completely factored form:

3(x + 4)(x - 2)

.

Adım Adım Çözüm

1

Identify and factor out the greatest common factor (GCF) from all three terms in the expression

3x^2 + 6x - 24

.

The GCF is 3. Factoring it out yields

3(x^2 + 2x - 8)

.

Factoring out the GCF simplifies the remaining trinomial, making it easier to factor and ensuring the final answer is factored completely.

2

Factor the remaining quadratic trinomial

x^2 + 2x - 8

by finding two integers that multiply to the constant term (-8) and add up to the middle coefficient (2).

The correct integers are 4 and -2 (since 4 * -2 = -8 and 4 + -2 = 2). This gives the binomial factors

(x + 4)(x - 2)

.

This process decomposes the monic quadratic trinomial into its constituent binomial factors.

3

Combine the GCF and the binomial factors to write the final factored expression.

The final product is

3(x + 4)(x - 2)

.

This represents the original expression as a product of its simplest prime factors.

Anahtar Kavram

Factoring Polynomials using GCF and Trinomial Decomposition

Soru 4Soru →

A base logistics officer needs to requisition 1,500 feet of paracord. Distributor A sells a 100-yard spool of paracord for $36.00. Distributor B sells the same paracord in a 50-foot roll for$ 5.50. If the officer purchases the entire 1,500 feet from the distributor with the lower overall cost, how much total money will be saved compared to purchasing from the more expensive distributor?

$163.50

$15.00

$375.00

$1,455.00

Cevabı ve açıklamayı göster

Cevap: $15.00

Cevap

The total savings is $15.00 when purchasing from Distributor B instead of Distributor A.

The correct answer is found by equalizing the units and calculating the total cost required to obtain 1,500 feet from each distributor. Distributor A provides 300 feet (100 yards) per

36.00 spool, so 5 spools are needed, costing

180.00. Distributor B provides 50 feet per

5.50 roll, so 30 rolls are needed, costing

165.00. The total savings is the difference:

180.00 -

165.00 = $15.00.

Adım Adım Çözüm

1

Calculate the total cost if buying from Distributor A.

100 yards × 3 feet/yard = 300 feet per spool. Number of spools needed = 1,500 feet ÷ 300 feet/spool = 5 spools. Total cost = 5 ×

36.00 =

180.00.

Units must be consistent (feet) to compare or fulfill the 1,500-foot requirement accurately.

2

Calculate the total cost if buying from Distributor B.

Number of rolls needed = 1,500 feet ÷ 50 feet/roll = 30 rolls. Total cost = 30 ×

5.50 =

165.00.

We must find the exact total cost for fulfilling the entire requisition of 1,500 feet with the second option.

3

Find the difference between the two total costs to determine savings.

180.00 -

165.00 = $15.00.

Subtracting the lower cost from the higher cost reveals the total amount saved.

Anahtar Kavram

Comparing unit prices across different bulk packages by establishing a common metric or total purchasing cost.

Soru 5Soru →

A motor pool mechanic needs to buy spark plugs. A single spark plug costs $3.00. A box of one dozen spark plugs costs$ 24.00. How much money is saved per spark plug by purchasing the box instead of buying them individually?

$1.00

$2.00

$2.50

$12.00

Cevabı ve açıklamayı göster

Cevap: $1.00

Cevap

$1.00

Purchasing the box of one dozen means buying 12 spark plugs for

24.00, which results in a unit price of

2.00 each (

24.00 ÷ 12). Buying them individually costs

3.00 each. The difference per spark plug is

3.00 -

2.00 = $1.00.

Adım Adım Çözüm

1

Determine the total number of items in the box.

1 dozen = 12 spark plugs.

To find the cost of a single spark plug from the box, the total quantity is required.

2

Calculate the unit price of a spark plug from the box.

24.00 ÷ 12 =

2.00 per spark plug.

Dividing the total cost by the quantity yields the price per individual item.

3

Calculate the savings per spark plug.

3.00 -

2.00 = $1.00.

Subtracting the bulk unit price from the individual unit price gives the savings per item.

Anahtar Kavram

Unit Price Comparisons

Soru 6Soru →

A military motor pool contains a total of $250$ utility vehicles. A morning report indicates that exactly $20\%$ of these vehicles are currently dispatched for a training exercise. How many vehicles are dispatched for the exercise?

50

5

200

230

Cevabı ve açıklamayı göster

Cevap: $50$

Cevap

There are

50

vehicles dispatched for the exercise.

The correct answer accurately determines

20\%

of

250

by multiplying the total (

250

) by the decimal form of the percentage (

0.20

).

Adım Adım Çözüm

1

Convert the percentage to a decimal equivalent.

20\% = 0.20

Percentages must be expressed as decimals or fractions to perform arithmetic calculations.

2

Multiply the total number of vehicles by the decimal value.

250 \times 0.20 = 50

To calculate a percentage of a specific quantity, multiply the total amount by the percentage rate.

Anahtar Kavram

To find a percentage of a quantity, convert the percentage into a decimal or fraction and multiply it by the total amount.

Tahmini Süre:30s

Soru 7Soru →

The area of a rectangular solar panel is modeled by the algebraic expression $w^2 - 5w + 6$ . Which of the following represents the completely factored form of this expression?

(w - 2)(w - 3)

(w + 2)(w + 3)

(w - 6)(w + 1)

(w + 6)(w - 1)

Cevabı ve açıklamayı göster

Cevap: $(w - 2)(w - 3)$

Cevap

The completely factored form of the expression is

(w - 2)(w - 3)

.

To factor the quadratic expression

w^2 - 5w + 6

, you must find two integers that multiply to the constant term (6) and add to the middle term's coefficient (-5). The integers -2 and -3 satisfy both conditions because

(-2) \times (-3) = 6

and

(-2) + (-3) = -5

. Placing these into binomials gives the correct factored form.

Adım Adım Çözüm

1

Identify the type of expression

The expression is a quadratic trinomial in the form

w^2 + bw + c

, where

b = -5

and

c = 6

.

Recognizing the structure helps determine the factoring method.

2

Find the factors of the constant term

The factors of 6 are (1, 6), (-1, -6), (2, 3), and (-2, -3).

The binomial factors must contain two numbers that multiply to the constant term.

3

Select the factor pair that adds to the middle coefficient

The sum of -2 and -3 is -5.

The two numbers must add up to the coefficient of the middle term.

4

Write the final factored expression

(w - 2)(w - 3)

Substituting the correct numbers into the binomial format

(w + p)(w + q)

.

Anahtar Kavram

Factoring Monic Quadratic Trinomials

Soru 8Soru →

A flight line supervisor is dividing $480$ hours of scheduled maintenance tasks between two mechanic crews in a ratio of $3:5$ . If the larger share of hours is assigned to the senior crew, how many maintenance hours does the senior crew receive?

160

180

288

300

Cevabı ve açıklamayı göster

Cevap: 300

Cevap

The senior crew receives 300 maintenance hours.

To solve the problem, first find the total number of parts in the ratio:

3 + 5 = 8

parts. Next, divide the total number of hours by the total parts to find the value of one part:

480 \div 8 = 60

hours. Finally, multiply the value of one part by

5

(the larger share) to find the senior crew's allocation:

60 \times 5 = 300

hours.

Adım Adım Çözüm

1

Find the total number of parts in the ratio by adding the terms together.

3 + 5 = 8

total parts.

To distribute a total amount according to a ratio, you must first determine how many equal parts make up the whole.

2

Determine the value of a single part by dividing the total hours by the total number of parts.

480 \div 8 = 60

hours per part.

This establishes the baseline unit value that corresponds to '1' in the ratio.

3

Multiply the value of a single part by the larger number in the ratio to find the senior crew's share.

60 \times 5 = 300

hours.

The problem states the senior crew receives the larger share, which corresponds to the '5' in the

3:5

ratio.

Anahtar Kavram

To divide a total quantity into a given ratio, add the terms to find the total number of parts, divide the total quantity by this sum to find the value of one part, and then multiply by the desired ratio term.

Tahmini Süre:1m 0s

Soru 9Soru →

Factor the trinomial $x^2 + 2x - 15$ . Which of the following choices shows the correct factorization?

(x + 5)(x - 3)

(x - 5)(x + 3)

(x + 5)(x + 3)

(x - 15)(x + 2)

Cevabı ve açıklamayı göster

Cevap: $(x + 5)(x - 3)$

Cevap

The correct factorization is

(x + 5)(x - 3)

.

To factor the quadratic expression

x^2 + 2x - 15

, we need to find two numbers that multiply to

-15

and add up to

2

. The numbers

5

and

-3

meet these criteria (

5 \times -3 = -15

and

5 + -3 = 2

). Therefore, the completely factored form is

(x + 5)(x - 3)

.

Adım Adım Çözüm

1

Identify the target sum and product for the factors.

The target sum is the coefficient of the middle term (

2

), and the target product is the constant term (

-15

).

To factor a trinomial

x^2 + bx + c

into

(x + p)(x + q)

, we need to find two integers

p

and

q

that multiply to

c

and add up to

b

.

2

Find the two integers that satisfy both conditions.

The factor pairs of

-15

are

(-1, 15)

,

(1, -15)

,

(-3, 5)

, and

(3, -5)

. The pair that adds to

2

is

-3

and

5

.

Checking the sums, only

5 + (-3) = 2

provides the correct middle coefficient.

3

Write the factored form using the selected integers.

The factored form is

(x + 5)(x - 3)

.

Substituting

5

and

-3

into the binomial framework

(x + p)(x + q)

completes the factorization.

Anahtar Kavram

Factoring Monic Quadratic Trinomials

Soru 10Soru →

A mechanic serviced the following number of vehicles over a five-day period: $10$ , $15$ , $4$ , $11$ , and $5$ .

What is the median number of vehicles serviced during this period?

4

9

10

11

Cevabı ve açıklamayı göster

Cevap: $10$

Cevap

The median number of vehicles serviced is

10

.

To find the median, the values must first be ordered from least to greatest:

4

,

5

,

10

,

11

,

15

. The median is the middle number in this ordered list, which is

10

.

Adım Adım Çözüm

1

Arrange the numbers in ascending order.

4

,

5

,

10

,

11

,

15

The median requires the data set to be sorted from least to greatest.

2

Identify the middle value in the sorted list.

The middle value is

10

.

Since there is an odd number of values in the list (five days), the median is exactly the middle number.

Anahtar Kavram

Measures of Central Tendency (Median)

Soru 11Soru →

A cargo plane travels at a constant speed of $300\text{ miles per hour}$ . At this rate, how many miles does the plane travel in $20\text{ minutes}$ ?

15

60

100

6,000

Cevabı ve açıklamayı göster

Cevap: $100$

Cevap

100

The correct answer correctly converts the travel time to hours by recognizing that

20\text{ minutes}

is exactly one-third (

\frac{1}{3}

) of an hour. Multiplying the rate of

300\text{ miles per hour}

by

\frac{1}{3}\text{ of an hour}

gives a total distance of

100\text{ miles}

.

Adım Adım Çözüm

1

Convert the given time from minutes to hours.

20\text{ minutes} = \frac{20}{60}\text{ hours} = \frac{1}{3}\text{ hour}

The speed is given in miles per hour, so the time must be in hours before multiplying.

2

Calculate the distance using the formula Distance = Rate × Time.

300 \times \frac{1}{3} = 100\text{ miles}

Multiplying the constant rate by the elapsed time yields the total distance traveled.

Anahtar Kavram

Converting time units to match the rate units before calculating distance.

Tahmini Süre:45s

Soru 12Soru →

An industrial machine uses a safety interlock limit switch on an access guard door. When the guard door is fully closed, it pushes down a spring-loaded plunger to complete the control circuit. When the door is opened, the plunger returns to its unactuated resting position, breaking the circuit and cutting power. Which switch configuration describes this device?

A normally open (NO) momentary switch that completes the circuit only when mechanically actuated

A normally closed (NC) momentary switch that maintains electrical continuity in its resting position

A double-pole, double-throw (DPDT) toggle switch configured for polarity reversal

A thermal bimetallic breaker switch that opens automatically when current exceeds a set limit

Cevabı ve açıklamayı göster

Cevap: A normally open (NO) momentary switch that completes the circuit only when mechanically actuated

Cevap

A normally open (NO) momentary switch that completes the circuit only when mechanically actuated

The 'normal' state of any electrical switch or relay contact is defined as its resting condition when no external mechanical force or coil energization is applied. In this access guard configuration, opening the door releases the plunger to its resting position, opening the circuit (infinite resistance, stopping current flow). Closing the door applies the mechanical force necessary to hold the contacts closed. Therefore, the device is a normally open (NO) momentary switch.

Adım Adım Çözüm

1

Identify the unactuated (resting) electrical state of the switch contacts.

When the guard door opens, the plunger is released back to its resting state, opening the electrical circuit.

By industry definition, the designation of a switch (Normally Open vs. Normally Closed) is determined by its state when no external force or actuation is present.

2

Determine the switch classification corresponding to this resting state and action.

Because the switch is open in its resting position and only conducts when held down by the door, it is a Normally Open (NO) momentary switch.

Momentary NO contacts require continuous physical force to maintain continuity and spring back to an open circuit when that force is removed.

Anahtar Kavram

Switch Contact Normal States (NO vs. NC) and Momentary Interlock Principles

Tahmini Süre:45s

Soru 13Soru →

A direct current (DC) automotive lamp connected to a $12\text{ V}$ power source draws a current of $2\text{ A}$ . What is the total electrical power consumed by the lamp?

6\text{ W}

14\text{ W}

24\text{ W}

48\text{ W}

Cevabı ve açıklamayı göster

Cevap: $24\text{ W}$

Cevap

24\text{ W}

According to Watt's Law, the electrical power (

P

) consumed by a circuit load is equal to the voltage (

V

) across the component multiplied by the current (

I

) flowing through it:

P = V \times I

. Substituting the given values yields

P = 12\text{ V} \times 2\text{ A} = 24\text{ W}

.

Adım Adım Çözüm

1

Identify the given circuit parameters

Voltage (

V

) =

12\text{ V}

, Current (

I

) =

2\text{ A}

These are the two electrical quantities necessary to calculate power directly.

2

Select the appropriate electrical power formula (Watt's Law)

P = V \times I

When voltage and current are known, power is equal to their product.

3

Substitute the given values into the formula and calculate

P = 12\text{ V} \times 2\text{ A} = 24\text{ W}

Multiplying electromotive force by current gives total power in watts.

Anahtar Kavram

Electrical power in a DC circuit is calculated using Watt's Law (

P = V \times I

), where power in watts is the product of voltage in volts and current in amperes.

Tahmini Süre:45s

Soru 14Soru →

An automotive technician is replacing a damaged section of wiring in a 12-volt vehicle circuit. If the replacement copper wire has the same length as the original wire but a smaller American Wire Gauge (AWG) number, what effect will this have on the wire's electrical resistance?

The electrical resistance will increase because a lower gauge number corresponds to a narrower wire.

The electrical resistance will decrease because a lower gauge number corresponds to a larger cross-sectional area.

The electrical resistance will remain constant because resistance depends solely on conductor length.

The electrical resistance will drop to zero because changing gauge eliminates all opposition to current.

Cevabı ve açıklamayı göster

Cevap: The electrical resistance will decrease because a lower gauge number corresponds to a larger cross-sectional area.

Cevap

The electrical resistance will decrease because a lower gauge number corresponds to a larger cross-sectional area.

In the American Wire Gauge (AWG) standard, gauge numbers are inversely related to physical wire diameter. A conductor with a smaller AWG number has a larger diameter and therefore a greater cross-sectional area. According to the formula

R = \rho \frac{L}{A}

, resistance is inversely proportional to cross-sectional area when material resistivity and length are constant. Thus, replacing a wire with one of a smaller AWG number results in lower electrical resistance.

Adım Adım Çözüm

1

Identify the relationship between the American Wire Gauge (AWG) scale and conductor diameter.

In the AWG standard, smaller numerical gauge numbers designate thicker conductors with larger cross-sectional areas (

A

).

The AWG numbering system is inverse; as the gauge number decreases, the physical diameter of the wire increases.

2

Apply the physical resistance formula:

R = \rho \frac{L}{A}

.

Because conductor length (

L

) and material resistivity (

\rho

) remain unchanged, increasing cross-sectional area (

A

) reduces total electrical resistance (

R

).

Electrical resistance is inversely proportional to the cross-sectional area of the conductor.

Anahtar Kavram

Relationship between American Wire Gauge (AWG), cross-sectional area, and electrical resistance (

R = \rho \frac{L}{A}

)

Soru 15Soru →

An auxiliary electric bilge pump operates on a $12\text{ V}$ DC power supply. If the internal electrical resistance of the pump motor is $6\ \Omega$ , what is the steady-state current drawn by the pump during operation?

0.5\text{ A}

2\text{ A}

6\text{ A}

72\text{ A}

Cevabı ve açıklamayı göster

Cevap: $2\text{ A}$

Cevap

The current drawn by the pump is

2\text{ A}

.

According to Ohm's Law, current (

I

) equals voltage (

V

) divided by resistance (

R

). Dividing the

12\text{ V}

supply by the

6\ \Omega

load resistance yields exactly

2\text{ A}

.

Adım Adım Çözüm

1

Identify the given circuit parameters and the formula to solve for unknown current.

Given: Voltage

V = 12\text{ V}

, Resistance

R = 6\ \Omega

. Ohm's Law states

V = I \times R

, which rearranges to

I = \frac{V}{R}

.

Ohm's Law defines the fundamental mathematical relationship between voltage, current, and resistance in a direct current circuit.

2

Substitute the given values into the rearranged formula and compute the current.

I = \frac{12\text{ V}}{6\ \Omega} = 2\text{ A}

.

Carrying out the division provides the magnitude of electron flow (amperage) through the load.

Anahtar Kavram

Ohm's Law formula for calculating current:

I = \frac{V}{R}

Tahmini Süre:40s

Soru 16Soru →

A passenger sedan maintains proper ride height and dampens vertical road impacts normally, but it leans excessively toward the outside when making sharp turns. Which suspension component is specifically designed to resist this lateral body roll?

Shock absorber

Coil spring

Stabilizer bar

Ball joint

Cevabı ve açıklamayı göster

Cevap: Stabilizer bar

Cevap

The stabilizer bar (sway bar) is the component engineered to resist lateral chassis lean during cornering.

The stabilizer bar, also known as a sway bar or anti-roll bar, is a transverse steel torsion bar that connects the left and right suspension control arms. When cornering forces compress the outside suspension and extend the inside suspension, the bar twists and transfers load, pulling the chassis back level and minimizing body roll.

Adım Adım Çözüm

1

Analyze the vehicle symptom and operating condition.

The vehicle handles normal vertical bumps smoothly without bouncing or sagging, but experiences excessive lean when cornering.

Isolating cornering body roll from vertical ride height and damping isolates the stabilizer linkage from springs and dampers.

2

Identify the component designed to transfer torsional load across the vehicle axle.

The stabilizer bar connects the left and right control arms, twisting to counteract unequal suspension travel during cornering.

Springs support weight and shock absorbers dampen bounce, whereas the stabilizer bar provides anti-roll stiffness.

Anahtar Kavram

Function and operating principle of a stabilizer bar in controlling vehicle body roll

Tahmini Süre:1m 0s

Soru 17Soru →

A technician is troubleshooting a power supply circuit featuring a full-wave bridge rectifier composed of four standard silicon diodes. During each single half-cycle of the alternating current (AC) input signal, how many of the four diodes conduct current simultaneously through the load?

Only one diode conducts while the remaining three diodes stay idle.

Two diodes conduct while the remaining two diodes are reverse-biased.

All four diodes conduct simultaneously in parallel to share the load current.

Three diodes conduct in series while one diode blocks the return path.

Cevabı ve açıklamayı göster

Cevap: Two diodes conduct while the remaining two diodes are reverse-biased.

Cevap

Two diodes conduct while the remaining two diodes are reverse-biased.

In a standard four-diode bridge rectifier, alternating current (AC) is converted to pulsating direct current (DC) by routing current through pairs of diodes. During any given half-cycle, two diagonally opposite diodes are forward-biased and conduct current through the load in a single direction, while the other two diodes are reverse-biased and block conduction.

Adım Adım Çözüm

1

Analyze the bridge rectifier circuit topology under an AC input half-cycle

One AC input terminal is positive with respect to the other terminal.

AC voltage alternates polarity every half-cycle, determining the bias conditions of each diode in the bridge.

2

Trace the current flow through the forward-biased diodes and the load

Current enters the bridge, passes through one forward-biased diode, travels through the load resistor, and returns through a second forward-biased diode to the opposite AC line.

A complete circuit path requires a forward and return path through the bridge network.

3

Determine the state of the remaining two diodes

The opposite pair of diodes experiences reverse bias and blocks current flow.

Diodes only conduct when their anode is more positive than their cathode.

Anahtar Kavram

Full-Wave Bridge Rectification and Diode Conduction Pairs

Tahmini Süre:1m 0s

Soru 18Soru →

Pure elemental silicon and germanium serve as the foundation of modern solid-state electronics due to their intermediate electrical conductivity. What atomic characteristic distinguishes these Group IV elements as semiconductors?

They contain only one weakly held outer electron that drifts freely between atomic nuclei.

They have exactly four valence electrons in their outermost shell, creating a stable covalent lattice under normal conditions.

They feature a full valence shell of eight electrons that completely blocks electrical charge movement.

They maintain a permanent net positive charge that actively opposes the flow of conventional current.

Cevabı ve açıklamayı göster

Cevap: They have exactly four valence electrons in their outermost shell, creating a stable covalent lattice under normal conditions.

Cevap

Pure silicon and germanium are classified as semiconductors because their atoms possess four valence electrons in their outermost shell, forming covalent bonds that yield intermediate electrical conductivity.

Semiconductors such as silicon (

Si

) and germanium (

Ge

) belong to Group IV of the periodic table and have four valence electrons in their outer shell. In crystalline form, each atom shares these four electrons with adjacent atoms via covalent bonds, resulting in electrical conductivity that lies midway between conductors (which typically have

1

to

3

loosely held valence electrons) and insulators (which typically have

5

to

8

tightly held valence electrons).

Adım Adım Çözüm

1

Determine the valence electron configuration of Group IV elements like silicon and germanium.

Both silicon (

Si

) and germanium (

Ge

) possess exactly

4

valence electrons in their outer energy shell.

The number of outer-shell valence electrons dictates how easily charge carriers can be released for electrical conduction.

2

Compare the valence count of semiconductors with conductors and insulators.

Conductors generally have

1

to

3

valence electrons, semiconductors have exactly

4

, and insulators typically have

5

to

8

tightly bound valence electrons.

With

4

valence electrons, neighboring atoms share electrons in covalent bonds, making pure semiconductors moderate conductors at room temperature.

Anahtar Kavram

Semiconductor atomic structure and valence electrons

Tahmini Süre:1m 0s

Soru 19Soru →

When a vehicle equipped with a standard open differential has one drive wheel on dry pavement and the other on slick ice, which of the following describes what happens when the driver presses the accelerator?

Both drive wheels turn at identical speeds to prevent either tire from slipping.

Torque is automatically shifted exclusively to the wheel on dry pavement.

The wheel on ice spins rapidly while the wheel on dry pavement receives very little driving torque.

The differential locks both axle shafts together to propel the vehicle forward.

Cevabı ve açıklamayı göster

Cevap: The wheel on ice spins rapidly while the wheel on dry pavement receives very little driving torque.

Cevap

The wheel on ice spins rapidly while the wheel on dry pavement receives very little driving torque.

A standard open differential always applies equal torque to both drive wheels. The maximum torque it can send to either wheel is limited by whichever tire loses traction first. When one wheel is on slick ice, it requires almost no torque to spin, meaning the wheel on dry pavement receives only that same near-zero amount of torque, leaving the vehicle unable to move.

Adım Adım Çözüm

1

Analyze the fundamental operating principle of a standard open differential.

An open differential distributes equal torque (a 50/50 split) to both drive wheels at all times.

The bevel spider gears inside the carrier balance torque evenly between the left and right side gears.

2

Determine how traction loss affects torque delivery.

The total usable torque delivered to both drive wheels is limited to the amount of torque required to spin the wheel with the lowest grip.

Because the wheel on slick ice has almost zero traction resistance, very little torque can build up before it slips.

3

Identify the resulting behavior of each wheel.

The wheel on ice spins freely while the wheel on dry pavement remains stationary due to insufficient driving torque.

The high-traction wheel receives only the same minimal torque as the spinning wheel, which is not enough to overcome the vehicle's inertia.

Anahtar Kavram

Open differential torque distribution on split-traction surfaces

Tahmini Süre:45s

Soru 20Soru →

In a combination valve on a front-disc and rear-drum braking system, what is the primary function of the metering valve?

It limits hydraulic line pressure delivered to the rear brakes during rapid stops to prevent wheel lockup.

It delays fluid pressure to the front disc brakes until the rear brake shoes overcome return spring tension.

It maintains a slight residual pressure in the hydraulic lines to keep air from entering the wheel cylinders.

It senses pressure drops between split hydraulic circuits and triggers the instrument panel warning light.

Cevabı ve açıklamayı göster

Cevap: It delays fluid pressure to the front disc brakes until the rear brake shoes overcome return spring tension.

Cevap

The metering valve delays fluid pressure to the front disc brakes until the rear brake shoes overcome return spring tension.

Because disc brake pads have zero clearance from the rotor while drum shoes must push against return springs to reach the drum, disc brakes apply faster. The metering valve (hold-off valve) prevents fluid flow to the front disc calipers until hydraulic pressure builds sufficiently to overcome the rear drum springs, ensuring balanced initial braking.

Adım Adım Çözüm

1

Analyze the mechanical differences between disc and drum brake actuation

Disc brake pads sit directly against the rotor and apply instantly with fluid movement, whereas drum brake shoes must first overcome return spring tension and travel through clearance to reach the drum.

Without timing correction, front disc brakes would engage significantly before the rear drum brakes during light pedal application.

2

Identify the specific valve component that regulates this initial timing difference

The metering valve (hold-off valve) blocks hydraulic pressure to the front disc calipers until line pressure reaches approximately 75 to 125 psi.

This slight pressure threshold ensures the rear shoes make contact with the drums so all four wheels begin braking at the same time, preventing front-end dive.

Anahtar Kavram

Hydraulic timing and balance between disc and drum brake assemblies via the metering valve

Tahmini Süre:1m 0s

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram