Examkin

Tüm alıştırma soruları

6 soru

Tüm türler5,215Çoktan seçmeli2,665Çoklu seçim6Doğru / Yanlış260Sayısal512Eşleştirme930Sıralama396Boşluk doldurma397Kısa cevap49
Soru 1Soru →

A mechanic needs to secure heavy shop machinery bases directly to a solid poured-concrete floor. Which of the following fasteners are specifically engineered to anchor fixtures into solid concrete? (Select all that apply.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Concrete sleeve expansion anchors; Hardened screw-in concrete anchors

Cevap

Concrete sleeve expansion anchors and hardened screw-in concrete anchors are the fasteners engineered specifically for securing fixtures into solid concrete.
Both concrete sleeve expansion anchors and hardened screw-in concrete anchors are specifically manufactured to grip dense, non-hollow concrete. Sleeve anchors expand radially against drilled concrete hole walls when tightened, while hardened concrete screws tap directly into the concrete, providing the required tensile and shear strength for heavy machinery.

Adım Adım Çözüm

1
Identify the base material and load requirements from the scenario.
The substrate is solid poured concrete and requires securing heavy shop machinery.
Matching anchor design to the substrate material and load magnitude is required for safe fastening.
2
Evaluate the fastener options designed specifically for solid concrete.
Sleeve expansion anchors and hardened screw-in concrete anchors provide mechanical interlock and friction in solid concrete, whereas drywall screws and plastic conical plugs are designed for hollow wall or light-duty drywall applications.
Specialty concrete anchors use expansion or thread-cutting mechanisms designed exclusively for masonry substrates.

Anahtar Kavram

Selection and mechanical principles of specialty masonry and concrete anchors
Tahmini Süre:45s
Soru 2Soru →

A fabricator is assembling an enclosed sheet-metal housing where the back side of the joint is completely inaccessible. Which of the following specialty fasteners are specifically designed for blind installation from only one side of the workpiece? (Select all correct answers.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Blind (pop) rivets; Threaded rivet nuts (blind insert nuts)

Cevap

Blind (pop) rivets and threaded rivet nuts (blind insert nuts) are the correct specialty fasteners for single-sided blind assembly.
Blind (pop) rivets and threaded rivet nuts are engineered specifically for blind fastening. A blind rivet consists of a tubular rivet body and an internal mandrel; when the installation tool pulls the mandrel, it deforms the blind end of the rivet into a bulb before snapping off. A threaded rivet nut functions similarly by collapsing a tubular shank against the back of the sheet to lock a permanent threaded insert into place, requiring access to only one side.

Adım Adım Çözüm

1
Analyze the assembly constraint described in the scenario
The rear side of the sheet-metal housing is enclosed and inaccessible, requiring blind fasteners operable entirely from one side.
Blind fasteners are specifically engineered to mechanically deform and clamp material without requiring backing tools or rear access.
2
Evaluate the mechanical function of each candidate fastener
Blind rivets expand via an internal pulled mandrel, and rivet nuts collapse a rear sleeve to create a captive female thread. Both operate from a single accessible side. Standard nuts and bolts require two-sided access, and common nails are wood fasteners relying on fibrous friction.
Identifying the operating mechanism determines which fasteners satisfy the blind installation requirement.

Anahtar Kavram

Blind Fasteners and Single-Sided Sheet Metal Anchoring
Tahmini Süre:1m 0s
Soru 3Soru →

A technician needs to repair stripped internal machine threads in an aluminum engine component so that the original-size bolt can be securely reinstalled. Which TWO of the following specialty fasteners are designed to restore internal machine threads in metal components? (Select TWO correct answers.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Helical coiled wire insert; Solid threaded bushing insert

Cevap

Helical coiled wire insert and Solid threaded bushing insert
Both the helical coiled wire insert and the solid threaded bushing insert are specialty fasteners engineered to repair stripped internal machine threads in metal components. The damaged hole is drilled out and tapped with a specialty oversized tap, and the insert is installed to provide durable, standard-sized internal threads that receive the original bolt.

Adım Adım Çözüm

1
Identify the base material and fastener function required in the scenario.
The application requires restoring female machine threads in an aluminum metal casting to accept an original-size machine bolt.
When soft metal internal threads strip out, standard bolts can no longer achieve proper clamping torque without a specialty thread replacement insert.
2
Evaluate the fasteners designed for internal thread restoration in metal versus building substrate anchors.
Helical coiled wire inserts and solid threaded bushing inserts are engineered specifically for metal thread repair, whereas lag shields and hollow-wall anchors are designed for masonry and drywall respectively.
Thread inserts provide wear-resistant internal threads matching standard machine screw thread pitches.

Anahtar Kavram

Specialty Thread Repair Inserts and Fasteners
Tahmini Süre:1m 0s
Soru 4Soru →

An installation team is mounting a heavy motorized winch assembly. The mounting requires fastening one side of the winch base to a structural steel tube where the back is completely inaccessible, and the other side into a solid old-growth oak support beam. The winch will generate extreme dynamic tension and high-frequency cyclic vibration during operation. Which of the following fastener selections and installation practices are correct for this specific application? (Select all that apply)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Install heavy-duty structural threaded inserts (blind rivet nuts) into the steel tubing to provide deep machine threads where back access is impossible.; Pre-drill appropriate pilot holes into the oak support beam and install hardened steel lag bolts to maximize holding power and prevent the dense wood from splitting.

Cevap

The correct practices are to use heavy-duty structural threaded inserts for the inaccessible steel tubing, and to pre-drill pilot holes for hardened lag bolts in the oak beam.
The correct selections address the specific mechanical limitations of the substrates. Threaded inserts are specifically engineered to provide high-strength internal machine threads in blind cavities where a standard backing nut cannot be applied. Concurrently, utilizing lag bolts with pre-drilled pilot holes is the mandatory standard for heavy structural attachments in hardwoods, as it prevents the dense wood grain from splitting while still engaging enough thread depth to withstand dynamic tension.

Adım Adım Çözüm

1
Analyze the steel tubing constraint.
Identify that the steel tubing is 'blind' (inaccessible back).
Standard nuts, washers, and through-bolts cannot be secured without back access, requiring a specialty blind anchor.
2
Select the appropriate steel fastener.
Determine that heavy-duty structural threaded inserts (rivet nuts) are required.
They compress against the inside wall of the tube to provide robust, vibration-resistant machine threads for heavy loads.
3
Analyze the wood constraint.
Identify oak as a dense hardwood subjected to high-tension load.
Hardwoods lack the cellular compressibility of softwoods, fundamentally changing how large fasteners interact with the grain.
4
Select the appropriate wood fastener and method.
Choose lag bolts and ensure pilot holes are pre-drilled.
Forcing large fasteners into hardwood without pilot holes causes catastrophic splitting or fastener shear, while lag bolts provide the necessary pull-out resistance.

Anahtar Kavram

Specialty Fastener Selection for Mixed Substrates and Dynamic Loads
Tahmini Süre:2m 0s
Soru 5Soru →

While servicing an automotive lead-acid battery, a technician needs to inspect and top off the corrosive sulfuric acid electrolyte. Which TWO of the following items of personal protective equipment (PPE) are required to safely perform this task?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Chemical splash-resistant safety goggles; Heavy-duty acid-resistant rubber gloves

Cevap

Chemical splash-resistant safety goggles and heavy-duty acid-resistant rubber gloves
Handling sulfuric acid battery electrolyte requires chemical-impermeable protection. Chemical splash-resistant goggles shield the eyes from liquid splashes via an enclosed seal, while heavy-duty acid-resistant rubber gloves prevent corrosive acid from contacting and burning the skin.

Adım Adım Çözüm

1
Identify the specific hazard associated with servicing automotive battery electrolyte.
The primary hazard is corrosive sulfuric acid liquid splash, which causes severe chemical burns to skin and eyes.
PPE selection must directly mitigate the specific physical and chemical hazards of the task.
2
Select the appropriate barrier PPE for eyes and hands against corrosive liquid chemicals.
Sealed chemical splash goggles and impermeable acid-resistant rubber gloves provide the required liquid barriers.
Standard impact glasses and absorbent cotton gloves fail to provide liquid-tight chemical protection.

Anahtar Kavram

Personal Protective Equipment Selection for Chemical and Battery Hazards
Tahmini Süre:45s
Soru 6Soru →

An automotive technician is preparing to cut away damaged body panels using a pneumatic reciprocating saw and an angle grinder. Which TWO of the following personal protective equipment (PPE) items are necessary to safeguard against the primary physical hazards of high-velocity flying debris and continuous loud machinery?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: A full-face shield worn over ANSI Z87-approved impact safety glasses with side shields; Acoustic earmuffs or form-fitting earplugs rated with an appropriate Noise Reduction Rating (NRR)

Cevap

The essential PPE items are a full-face shield worn over ANSI Z87-approved impact safety glasses with side shields, and acoustic earmuffs or form-fitting earplugs with an adequate Noise Reduction Rating (NRR).
Mechanical cutting and grinding produce two immediate severe hazards: high-speed projectile debris (sparks, burrs, fragments) and high decibel acoustic output. Complete protection requires dual-layer eye/face defense—specifically a full-face shield over ANSI Z87-certified safety glasses with side shields—alongside properly rated acoustic earplugs or earmuffs to safeguard hearing.

Adım Adım Çözüm

1
Identify the distinct physical hazards generated by pneumatic saws and angle grinders.
The operation generates high-velocity metal particles, potential grinding wheel fragmentation, and continuous sound levels exceeding 90 to 100 dB.
Accurate hazard assessment is the fundamental first step in determining appropriate protective barriers.
2
Select the proper primary and secondary eye and face protection.
Combine Z87-rated safety glasses (primary eye barrier) with a clear full-face shield (secondary facial barrier).
Grinding wheels can shatter or throw sharp metal burrs from various angles, requiring complete facial shielding.
3
Select adequate hearing protection suited for high-decibel pneumatic and rotary power tools.
Choose certified earplugs or earmuffs with a verified Noise Reduction Rating (NRR).
High-decibel air-driven tools quickly exceed safe continuous exposure thresholds, leading to irreversible sensorineural hearing loss without dampening.

Anahtar Kavram

Selection of multi-hazard personal protective equipment (PPE) for mechanical cutting, grinding, and high-noise shop operations.
Tahmini Süre:1m 0s
Tüm alıştırma soruları — Armed Services Vocational Aptitude Battery (ASVAB) | Examkin