Tüm alıştırma soruları

5215 soru

Soru 4541Soru →

A military training field is rectangular, measuring 160160 yards wide and 300300 yards long. A recruit must travel from one corner of the field to the opposite corner. If the recruit runs directly across the diagonal instead of moving along the outer edges of the two sides, how many yards does the recruit save?

Cevabı ve açıklamayı göster

Cevap: 120

Cevap

120 yards
The route along the edges is the sum of the width and length (160+300=460160 + 300 = 460 yards). The diagonal route is the hypotenuse of the right triangle formed by these sides, calculated as 1602+3002=340\sqrt{160^2 + 300^2} = 340 yards. The distance saved is 460−340=120460 - 340 = 120 yards.

Adım Adım Çözüm

1
Calculate the total distance if traveling along the two outer edges of the rectangular field.
160+300=460160 + 300 = 460 yards.
This establishes the longer route distance to compare against the diagonal shortcut.
2
Set up the Pythagorean theorem to find the length of the diagonal route.
1602+3002=c2160^2 + 300^2 = c^2
The rectangular field forms a right triangle where the width and length are the legs, and the diagonal is the hypotenuse.
3
Solve for the diagonal length (cc).
c=115600=340c = \sqrt{115600} = 340 yards.
This gives the exact distance of the direct route.
4
Calculate the difference between the two routes.
460−340=120460 - 340 = 120 yards.
Subtracting the shorter diagonal route from the longer perimeter route yields the exact distance saved.

Anahtar Kavram

Applying the Pythagorean theorem (a2+b2=c2a^2 + b^2 = c^2) to find a direct diagonal distance, and comparing it to the linear distance along the edges.
Soru 4542Soru →

To safeguard steel vessel hulls against galvanic corrosion in saltwater environments, marine technicians mount sacrificial zinc anodes along the submerged plating. Because zinc possesses a lower electrochemical potential than structural steel, the seawater electrolyte causes the zinc to oxidize and dissolve preferentially. This chemical sacrifice supplies electrons to the hull, maintaining the steel as a protected cathode. For optimal defense, technicians must ensure direct, bare metal-to-metal contact between the anode and the vessel. Applying marine antifouling paint over the zinc insulates its surface, halting the protective electrical current and leaving the nearby steel susceptible to aggressive structural pitting.

Based on the passage, what is the consequence of applying antifouling paint over a sacrificial zinc anode?

Cevabı ve açıklamayı göster

Cevap: It creates an insulating barrier that interrupts the protective electrical current, exposing the adjacent metal to destructive pitting.

Cevap

It creates an insulating barrier that interrupts the protective electrical current, exposing the adjacent metal to destructive pitting.
The correct response accurately restates the factual consequence mentioned in the final sentence of the passage. The text explains that painting the zinc anode insulates its surface, stops the protective current from flowing, and leaves the steel prone to pitting. The correct option expresses this exact sequence of facts using synonyms ('insulating barrier', 'interrupts', 'adjacent metal', 'destructive pitting') without copying verbatim phrases.

Adım Adım Çözüm

1
Locate the specific target fact regarding antifouling paint in the paragraph.
Identified the statement: 'Applying marine antifouling paint over the zinc insulates its surface, halting the protective electrical current and leaving the nearby steel susceptible to aggressive structural pitting.'
The question asks directly for the specific outcome when paint is applied over the zinc anode.
2
Map key concepts from the passage to accurate synonymous equivalents.
'Insulates its surface' maps to 'creates an insulating barrier', 'halting the protective electrical current' maps to 'interrupts the protective electrical current', and 'leaving the nearby steel susceptible to aggressive structural pitting' maps to 'exposing the adjacent metal to destructive pitting.'
Recognizing accurate paraphrasing requires identifying equivalent semantic meaning rather than relying on exact word-for-word repetition.
3
Filter out distractors that invert causality, use verbatim traps, or rely on outside knowledge.
Eliminated options using exact phrasing out of context, reversing the effect on electron flow, or assuming unstated environmental impacts.
Standard assessment reading comprehension items often test the ability to separate genuine paraphrased facts from superficial verbatim traps.

Anahtar Kavram

Paraphrased Fact Recognition
Tahmini Süre:1m 0s
Soru 4543Soru →

Municipal water filtration plants utilize powdered activated carbon to absorb organic pollutants before water reaches the primary sand filters. While effective, excess carbon particles can clog the sand filter pores if contact basin retention times drop below twenty minutes. To prevent filter clogging during high-demand surges when retention times fall to fifteen minutes, technicians must activate secondary coagulation aids that bind free carbon particles into heavy clumps. Yesterday morning, a sudden demand spike shortened retention times to twelve minutes, but secondary coagulation pumps were shut down for scheduled maintenance.

Based on the passage, which of the following is the most logical conclusion regarding yesterday's filtration process?

Cevabı ve açıklamayı göster

Cevap: The primary sand filters were vulnerable to clogging by uncoagulated carbon particles.

Cevap

The primary sand filters were vulnerable to clogging by uncoagulated carbon particles.
The passage establishes two key premises: retention times under twenty minutes cause carbon to clog sand filters, and secondary coagulation aids are required to prevent this clogging when retention times are shortened. Because the retention time dropped to twelve minutes and the coagulation pumps were offline for maintenance, the system lacked the safeguard needed to stop carbon from clogging the sand filters.

Adım Adım Çözüm

1
Identify the cause-and-effect conditions stated in the passage.
Unbound carbon particles clog sand filter pores whenever retention time drops below twenty minutes, unless secondary coagulation aids are active.
Establishing the rules governing filter operation is necessary to evaluate the outcome of specific operating conditions.
2
Evaluate the specific events that occurred yesterday.
Retention time dropped to twelve minutes (well below twenty minutes), and secondary coagulation pumps were offline.
Matching the actual events against the established rules reveals which safeguards failed.
3
Deduce the logical outcome from the combination of events.
Without active coagulation pumps to bind the carbon particles during a sub-twenty-minute retention period, the primary sand filters faced direct risk of clogging.
Synthesizing the constraints yields a strictly supported deduction about filter vulnerability.

Anahtar Kavram

Synthesizing multiple conditional constraints to deduce an unstated operational outcome.
Tahmini Süre:1m 0s
Soru 4544Soru →

Read the following passage:

Ultrasonic phased array testing has become the primary non-destructive evaluation technique for detecting subsurface flaws in modern carbon-fiber aircraft fuselages. By directing high-frequency acoustic waves into composite laminates, the equipment captures internal reflection patterns that reveal structural anomalies. Specifically, internal delaminations between laminate plies create distinct acoustic impedance boundaries, which attenuate wave penetration and produce early echo returns. Technicians analyze these anomalous echo signals on calibrated A-scan and B-scan displays to map the exact depth and lateral boundary of the ply separation.

Arrange the following statements in hierarchical order, from the overarching main idea of the passage (broadest claim) to the most specific subordinate detail.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct hierarchical sequence from broadest main idea to most specific subordinate detail is: 1) Ultrasonic testing identifies composite aircraft flaws, 2) Acoustic waves generate reflection patterns revealing anomalies, 3) Inter-ply delaminations cause acoustic impedance boundaries and early echoes, and 4) Technicians use A-scan and B-scan displays to measure flaw depth and boundaries.
The correct order follows a clear deductive hierarchy: the statement introducing ultrasonic phased array testing as the primary evaluation method establishes the central thesis; the general acoustic reflection mechanism provides broad supporting evidence; the formation of impedance boundaries at delaminations narrows the focus to a specific flaw type; and the use of A-scan and B-scan displays represents the most localized procedural detail.

Adım Adım Çözüm

1
Identify the overarching main idea that covers the entire passage scope.
The statement declaring ultrasonic phased array testing as the primary non-destructive evaluation technique for aircraft composite inspection is the central thesis.
The main idea must unify all subsequent sentences under a single governing claim.
2
Determine the major conceptual mechanism that supports the main idea.
The general explanation of how transmitting acoustic waves into laminates produces diagnostic reflection patterns acts as the primary supporting principle.
This concept explains the general working mechanism before examining specific flaw types or readout methods.
3
Isolate the intermediate detail describing a specific defect mechanism.
The description of how delamination between plies creates an acoustic impedance boundary causing early echoes is identified.
This narrows the focus from general acoustic reflection down to the behavior of a specific flaw condition.
4
Locate the narrowest operational detail.
The procedural interpretation of A-scan and B-scan display data to record exact dimensions and depths is ranked as the most specific subordinate detail.
This point focuses on granular instrumentation readouts and precise data mapping.

Anahtar Kavram

Distinguishing the central thesis from major supporting concepts and granular operational details based on scope and structural hierarchy.
Tahmini Süre:1m 15s
Soru 4545Soru →

Before operating a newly repaired hydraulic lift, maintenance personnel must carefully bleed the fluid lines. Trapped air pockets inside the closed system can cause erratic movement and prevent the cylinders from holding pressure properly. Opening the release valve allows the trapped air to escape until a solid stream of fluid appears, ensuring smooth and reliable mechanical operation.

As used in the passage, the word "bleed" most nearly means to

Cevabı ve açıklamayı göster

Cevap: release trapped air or fluid from a closed system

Cevap

Release trapped air or fluid from a closed system
In this context, 'bleed' refers to the mechanical maintenance procedure of opening a valve to let unwanted air pockets escape from hydraulic lines so the system functions properly.

Adım Adım Çözüm

1
Examine the surrounding context to identify clues explaining the action.
The text mentions that opening the release valve allows trapped air to escape until a solid stream of fluid appears.
Surrounding sentences define the function and purpose of the target action.
2
Select the option that matches the action of allowing trapped air or fluid to escape.
Releasing trapped air or fluid from a closed system precisely describes the procedure.
The correct answer must reflect the mechanical operation described in the paragraph.

Anahtar Kavram

Inferring Vocabulary Meaning from Context
Tahmini Süre:45s
Soru 4546Soru →

What is the value of the following expression?

15−3×4+215 - 3 \times 4 + 2
Cevabı ve açıklamayı göster

Cevap: 5

Cevap

5
The correct answer is found by properly applying the order of operations. Multiplication takes precedence over subtraction and addition, so 3 * 4 is evaluated first to get 12. The expression then becomes 15 - 12 + 2. Because subtraction and addition have the same priority, they are evaluated from left to right. Subtracting 12 from 15 gives 3, and adding 2 to 3 gives the final result of 5.

Adım Adım Çözüm

1
Perform the multiplication operation first.
3×4=123 \times 4 = 12
According to the order of operations (PEMDAS), multiplication must be completed before addition and subtraction.
2
Substitute the result back into the expression and subtract.
15−12=315 - 12 = 3
Addition and subtraction are of equal priority, so they are evaluated from left to right.
3
Perform the final addition operation.
3+2=53 + 2 = 5
This is the final remaining operation in the expression.

Anahtar Kavram

Order of Operations
Soru 4547Soru →

During scheduled maintenance of dry-chemical fire suppression canisters, technicians must inspect the nitrogen propellant pressure gauge. If the ambient temperature is 70°F, the gauge indicator must rest squarely within the green zone between 195 and 205 psi. A reading below this range indicates slow leakage through the discharge valve seal, requiring complete depressurization and cylinder replacement. Conversely, if ambient temperatures exceed 90°F, thermal expansion can cause a temporary pressure rise without indicating system failure.

According to the passage, what problem is indicated when the pressure gauge reads below the specified range at 70°F?

Cevabı ve açıklamayı göster

Cevap: Slow leakage through the discharge valve seal

Cevap

Slow leakage through the discharge valve seal
The passage explicitly declares that when the gauge indicator falls below the 195–205 psi range at 70°F, it indicates slow leakage through the discharge valve seal.

Adım Adım Çözüm

1
Locate the condition specified in the stem within the passage text.
Found the phrase referring to readings below the normal range at 70°F.
Direct fact retrieval requires scanning for the exact situational context stated in the prompt.
2
Extract the explicit factual cause directly tied to that condition.
The text states that a reading below this range indicates slow leakage through the discharge valve seal.
The correct response must mirror the explicit factual claim made by the author without extrapolation.

Anahtar Kavram

Direct Fact Retrieval from Technical Text
Tahmini Süre:1m 0s
Soru 4548Soru →

Match each unsimplified algebraic expression with its correctly simplified polynomial equivalent.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

3x−2(x−5)+43x - 2(x - 5) + 4
5(2x2−x)−3x(x+2)5(2x^2 - x) - 3x(x + 2)
4x−[2x+3(x−1)]4x - [2x + 3(x - 1)]
12(4x−6)+3(x+2)\frac{1}{2}(4x - 6) + 3(x + 2)

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

The correct matches pair each unsimplified expression with its corresponding standard form by applying the distributive property and carefully combining like terms.
Each correct pairing is derived by rigorously applying the distributive property, adhering to the order of operations for nested groupings, and grouping matching polynomial degrees correctly.

Adım Adım Çözüm

1
Simplify the first expression: 3x−2(x−5)+43x - 2(x - 5) + 4.
x+14x + 14
Apply the distributive property to −2(x−5)-2(x - 5) to get −2x+10-2x + 10. Then combine like terms: (3x−2x)+(10+4)(3x - 2x) + (10 + 4).
2
Simplify the second expression: 5(2x2−x)−3x(x+2)5(2x^2 - x) - 3x(x + 2).
7x2−11x7x^2 - 11x
Distribute 55 to get 10x2−5x10x^2 - 5x, and distribute −3x-3x to get −3x2−6x-3x^2 - 6x. Group like terms: (10x2−3x2)+(−5x−6x)(10x^2 - 3x^2) + (-5x - 6x).
3
Simplify the third expression: 4x−[2x+3(x−1)]4x - [2x + 3(x - 1)].
−x+3-x + 3
Follow the order of operations by simplifying the innermost grouping first: 3(x−1)=3x−33(x - 1) = 3x - 3. The brackets become [5x−3][5x - 3]. Distributing the subtraction gives 4x−5x+34x - 5x + 3.
4
Simplify the fourth expression: 12(4x−6)+3(x+2)\frac{1}{2}(4x - 6) + 3(x + 2).
5x+35x + 3
Multiply coefficients: 12(4x)−12(6)=2x−3\frac{1}{2}(4x) - \frac{1}{2}(6) = 2x - 3, and 3(x)+3(2)=3x+63(x) + 3(2) = 3x + 6. Combine xx terms and constants: (2x+3x)+(−3+6)(2x + 3x) + (-3 + 6).

Anahtar Kavram

Simplifying Algebraic Expressions
Soru 4549Soru →

Read the following passage and use the context clues to complete the statement below:

"Combat engineers tasked with clearing mountain supply routes frequently encounter arduous terrain. Navigating these strenuous, grueling paths requires exceptional physical stamina and specialized winching gear, particularly when heavy tactical convoys must ascend steep, unpaved switchbacks in freezing rain. Without adequate mechanical support, prolonged transit across such demanding corridors can exhaust personnel and delay critical logistics."

Aşağıdaki boşlukları doldurun

Based on the synonymous context clues in the passage, the word 'arduous' most nearly means .
Cevabı ve açıklamayı göster

Cevap

The word 'arduous' most nearly means strenuous (or grueling / demanding / difficult), as directly established by the synonymous parallel descriptors in the text.
In the passage, the author introduces 'arduous terrain' in the opening sentence and immediately refers back to those same routes in the second sentence as 'these strenuous, grueling paths.' The author reinforces this meaning in the concluding sentence with 'such demanding corridors.' The parallel descriptive adjectives 'strenuous,' 'grueling,' and 'demanding' function as direct synonymous context clues indicating that 'arduous' means difficult, strenuous, or taxing.

Adım Adım Çözüm

1
Locate the target vocabulary word in the initial sentence of the passage.
The target word 'arduous' modifies the noun 'terrain' in the context of mountain supply routes.
Identifying the target word and its syntactic role provides the baseline for locating clarifying context.
2
Examine adjacent sentences for parallel phrasing, restatements, or appositive descriptors that refer back to the same subject.
The subsequent sentence describes navigating 'these strenuous, grueling paths,' and the final sentence refers to 'such demanding corridors.'
Demonstrative pronouns like 'these' and 'such' link the newly introduced adjectives directly to the previously mentioned 'arduous terrain.'
3
Synthesize the synonymous clues to define the target word.
The words 'strenuous,' 'grueling,' and 'demanding' serve as direct textual synonyms defining 'arduous' as requiring great effort or physical exertion.
Contextual synonyms replace or restate the meaning of the target word without altering the core idea of the passage.

Anahtar Kavram

Identifying Synonymous Context Clues
Soru 4550Soru →

Before navigating the uncharted coastal inlet, the lead navigator ordered the watch team to sound the shallow waters ahead using weighted lead lines. Relying on verified bathymetric measurements rather than visual surface cues prevented the heavy patrol vessel from grounding on shifting sandbars during low tide.

As used in the passage, the word "sound" most nearly means to:

Cevabı ve açıklamayı göster

Cevap: measure the depth of

Cevap

The word 'sound' in this context most nearly means to measure the depth of water.
In maritime and navigational contexts, the verb 'sound' means to measure the depth of a body of water. The passage provides immediate context clues with the mention of 'weighted lead lines' and 'bathymetric measurements' designed to prevent the vessel from running aground.

Adım Adım Çözüm

1
Analyze the syntactic role and surrounding context clues for the target word.
The word 'sound' functions as an active verb performed by a watch team using 'weighted lead lines.'
Identifying the tool being utilized clarifies the specific physical action being carried out.
2
Examine the subsequent sentence for clarifying semantic context.
The action yields 'verified bathymetric measurements' that prevent the vessel from 'grounding on shifting sandbars.'
Bathymetry specifically refers to the measurement of water depth in oceans, seas, or lakes.
3
Evaluate the options against the contextual evidence to distinguish between multiple meanings.
Selecting 'measure the depth of' matches the specialized nautical definition of sounding a waterway.
This isolates the maritime depth-testing definition from acoustic or auditory definitions.

Anahtar Kavram

Analyzing multiple-meaning words using technical and domain-specific context clues
Tahmini Süre:1m 0s
Soru 4551Soru →

Aircraft de-icing and anti-icing fluids are vital for ensuring flight safety during winter operations, as even slight ice accumulation degrades lift by disrupting laminar airflow over wing surfaces. Ground crews first apply heated Type I fluids to melt existing ice, snow, and frost from the fuselage and control surfaces. Following this cleanup, unheated Type IV fluids containing thickening agents are applied to create a temporary protective layer that stops freezing precipitation from adhering while the aircraft taxis. This protective barrier provides a critical window called holdover time, ensuring safe departure before new ice forms.

Which of the following best expresses the main idea of the passage?

Cevabı ve açıklamayı göster

Cevap: Specialized fluid treatments maintain winter takeoff safety by clearing existing frozen contamination and temporarily preventing new ice formation.

Cevap

Specialized fluid treatments maintain winter takeoff safety by clearing existing frozen contamination and temporarily preventing new ice formation.
The statement regarding how specialized fluid treatments maintain winter takeoff safety by clearing existing frozen contamination and temporarily preventing new ice formation is correct because it synthesizes the passage's complete message. It unites the introductory context of flight safety with the two central stages explained in the text: heated Type I de-icing and thickened Type IV anti-icing protection.

Adım Adım Çözüm

1
Analyze the passage structure and identify the central subject.
The text discusses how ground crews use two complementary fluid applications (Type I for melting ice and Type IV for preventing new ice) to protect aircraft during winter departures.
Understanding the complete scope of the text prevents selecting narrow supporting details.
2
Differentiate between supporting evidence and the comprehensive summary.
Statements about laminar airflow disruption, Type I heating, and Type IV thickening agents serve as specific operational details that support the overall concept of two-stage ground protection.
The main idea must encapsulate the entire passage rather than focus on an isolated fact.
3
Select the choice that encompasses both de-icing and anti-icing objectives without scope restriction.
The option stating that specialized fluid treatments maintain winter takeoff safety by clearing existing contamination and preventing new ice formation accurately represents the overarching main idea.
This choice synthesizes the full operational sequence and its primary purpose.

Anahtar Kavram

Distinguishing the overarching thesis of a passage from subordinate supporting facts and procedural details.
Tahmini Süre:1m 0s
Soru 4552Soru →

Read the following technical passage:

During daily pre-flight servicing of tactical transport aircraft, fuel system specialists must perform a visual fuel contamination check. When draining fuel samples from the lowest sump drain valve, technicians must collect at least one quart of fuel into a clean, clear glass jar and inspect it for particulate matter and free water. If microscopic water droplets create a cloudy haze, the sample fails the clarity test, and personnel must let the tank settle undisturbed for 30 minutes before repeating the sampling procedure.

Fill in the blank to complete the statement according to the facts directly stated in the passage.

Aşağıdaki boşlukları doldurun

If a fuel sample fails the clarity test due to a cloudy haze, personnel must let the tank settle undisturbed for before repeating the sampling procedure.
Cevabı ve açıklamayı göster

Cevap

30 minutes (or thirty minutes)
The author explicitly states that when microscopic water droplets create a cloudy haze that fails the clarity test, 'personnel must let the tank settle undisturbed for 30 minutes before repeating the sampling procedure.' Thus, 30 minutes is the directly stated timeframe required to fill the blank.

Adım Adım Çözüm

1
Locate the specific sentence in the passage discussing a failed clarity test caused by a cloudy haze.
Found the explicit condition: 'If microscopic water droplets create a cloudy haze, the sample fails the clarity test, and personnel must let the tank settle undisturbed for 30 minutes before repeating the sampling procedure.'
Direct fact retrieval requires scanning for the exact factual trigger and identifying the corresponding action or metric.
2
Extract the exact settling duration directly mentioned in the sentence.
The text explicitly specifies that the tank must settle undisturbed for '30 minutes'.
The blank requires an exact factual value stated in the text without alteration or inference.

Anahtar Kavram

Direct retrieval of explicit quantitative details from a technical passage
Tahmini Süre:1m 0s
Soru 4553Soru →

During high-altitude reconnaissance missions, meteorological officers must closely monitor the formation of noctilucent clouds. These ethereal—that is, uncharacteristically delicate and airy—ice crystal formations develop in the mesosphere and can distort optical telemetry. Because they remain nearly invisible during daylight hours, tracking systems rely on ultraviolet scattering to identify their presence before sensor readings become erratic.

As used in the passage, the word "ethereal" most nearly means which of the following?

Cevabı ve açıklamayı göster

Cevap: delicate and airy

Cevap

In this passage, 'ethereal' most nearly means 'delicate and airy.'
The correct answer accurately captures the contextual synonym provided in the text. The author uses a clarifying appositive construction set off by dashes ('—that is, uncharacteristically delicate and airy—') to define 'ethereal' directly for the reader.

Adım Adım Çözüm

1
Locate the target word in the passage and identify surrounding punctuation or structural clues.
The word 'ethereal' is immediately followed by a parenthetical phrase enclosed in em-dashes: '—that is, uncharacteristically delicate and airy—'.
Authors frequently use em-dashes along with transition phrases like 'that is' to provide an explicit appositive definition or synonymous clarification of an unfamiliar or specialized term.
2
Extract the synonym provided within the structural clue.
The text directly equates 'ethereal' with being 'delicate and airy.'
The clue defines the physical nature of these particular mesospheric ice formations.
3
Evaluate the answer choices against the textual definition and eliminate distractors.
The option stating 'delicate and airy' matches the exact restatement provided in the text.
Other choices rely on verbatim terms from later in the passage, out-of-context dictionary meanings, or unsupported assumptions about cloud density.

Anahtar Kavram

Identifying Synonymous Restatements via Appositives and Transitional Markers
Tahmini Süre:1m 5s
Soru 4554Soru →

Passage:
During pre-flight testing on cargo aircraft, auxiliary cooling fans must remain active whenever instruments run on ground power. If internal avionics bay temperatures exceed 40°C, navigation processors automatically throttle performance to prevent heat damage, which triggers false diagnostic failure alerts. Consequently, technicians encountering diagnostic errors during warm weather testing must check cooling fan operation before swapping out expensive circuit cards.

Statement: Ensuring that the avionics bay temperature remains below 40°C prevents navigation processors from generating false diagnostic failure alerts.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True: Keeping the avionics bay temperature below 40°C prevents the processor throttling that generates false diagnostic alerts.
The passage links temperatures over 40°C directly to processor throttling and the resulting false diagnostic failure alerts. It is logically valid to conclude that preventing temperatures from reaching 40°C prevents this specific failure mode.

Adım Adım Çözüm

1
Identify the cause of false diagnostic failure alerts described in the text.
Temperatures exceeding 40°C cause navigation processors to throttle performance, which generates false alerts.
Establishing the direct cause-and-effect chain is required to evaluate the validity of the statement.
2
Evaluate whether preventing the cause (temperatures exceeding 40°C) prevents the consequence (false alerts).
If temperatures do not exceed 40°C, the throttling condition that produces false alerts does not occur.
Deducing the logical converse of the conditional relationship confirms the statement is true.

Anahtar Kavram

Drawing logical deductions regarding cause-and-effect relationships from technical procedures.
Tahmini Süre:45s
Soru 4555Soru →

Routine maintenance of chainsaw chains involves more than just keeping the cutting teeth sharp. Operators frequently overlook the depth gauges, or "rakers," which sit directly in front of each tooth. These small metal fins control the depth of cut by regulating how deeply the tooth bites into the wood. If rakers are left too high after repeated tooth sharpenings, the chain merely grazes the wood without cutting efficiently. Conversely, filing them down too low causes the teeth to dig in too aggressively, creating severe kickback risks and stalling the motor. Proper maintenance requires regularly checking raker height with a dedicated depth gauge tool.

Based on the passage, what is the author's primary purpose?

Cevabı ve açıklamayı göster

Cevap: To explain the importance of properly maintaining chainsaw depth gauges

Cevap

To explain the importance of properly maintaining chainsaw depth gauges
The author introduces the commonly overlooked component of chainsaw chains (depth gauges/rakers), explains how both under-filing and over-filing cause operational problems, and concludes that regular maintenance with a depth gauge tool is necessary. Therefore, the primary purpose is to explain the importance of maintaining these components.

Adım Adım Çözüm

1
Identify the primary topic and central focus of the text.
The text discusses depth gauges (rakers) on chainsaw chains, explaining their function and the problems caused when they are too high or too low.
Understanding the topic helps separate overarching purpose from isolated supporting details.
2
Analyze the author's communicative goal and tone.
The author provides informative guidance on why depth gauges matter and how neglecting them impairs performance or causes safety hazards.
The author's goal is educational and explanatory rather than purely argumentative or focused on a single hazard.
3
Match the synthesized intent to the option that captures the complete scope.
The statement expressing the importance of properly maintaining chainsaw depth gauges directly represents the passage's primary purpose.
This option reflects the central theme without overgeneralizing or narrowing to a minor detail.

Anahtar Kavram

Inferring Author Purpose and Intent
Tahmini Süre:45s
Soru 4556Soru →

Read the passage below. Based on the technical details provided, complete the sentence with the most logical conclusion regarding the system that malfunctioned.

Aşağıdaki boşlukları doldurun

Aviation maintenance protocols state that aircraft pitot tubes must be electrically heated during sub-zero flights to prevent atmospheric ice from blocking the forward intake. When an intake becomes obstructed with ice, dynamic ram air cannot enter the sensor, causing the cockpit airspeed indicator to drop to zero while the static line and altimeter continue functioning normally. During a routine winter patrol, an aircraft operating with steady engine thrust experienced an abrupt drop in its airspeed reading to zero, while altitude readings remained completely accurate. Based strictly on the provided text, the maintenance crew can deduce that a failure occurred in the system.
Cevabı ve açıklamayı göster

Cevap

pitot heat (or pitot heating / pitot tube heating)
The passage explains that sub-zero flights require electrical pitot tube heating to prevent ice from blocking the intake. When ice blocks the intake, dynamic ram air is cut off, causing airspeed readings to fall to zero while the altimeter continues to read accurately. Because the aircraft experienced an airspeed drop to zero in freezing conditions while maintaining thrust and accurate altitude, the maintenance crew can logically conclude that the electrical pitot heating mechanism failed to prevent ice accumulation.

Adım Adım Çözüm

1
Identify the symptoms described in the flight scenario.
The flight was conducted in sub-zero winter weather, engine thrust remained steady, altitude readings were normal, but the airspeed indicator dropped to zero.
Connecting specific reported symptoms to explicit system behaviors outlined in the text is necessary to isolate the underlying cause.
2
Match the observed symptoms to the causal mechanisms provided in the passage.
The passage explicitly notes that an ice obstruction in the pitot intake makes the airspeed gauge read zero while the static altimeter remains normal.
Synthesizing the exact conditions distinguishes an intake blockage from an engine or static system failure.
3
Deduce which preventive system failed to allow the blockage under sub-zero conditions.
Because electrical pitot tube heating is required in sub-zero conditions to prevent ice formation, a failure of the pitot heating system is the direct cause of the icing and subsequent gauge failure.
Drawing a logical conclusion requires identifying the primary failed safeguard that permitted the chain of events to occur.

Anahtar Kavram

Synthesizing technical conditions and observed symptoms to deduce an unstated root cause
Tahmini Süre:1m 0s
Soru 4557Soru →

The navy’s hasty adoption of uninsulated high-pressure steam lines across early dreadnought refits was heralded by quartermasters as a triumph of thermal efficiency. In practice, however, these brittle conduits routinely warped under the shudder of heavy sea swells, leaving engine crews to labor in sweltering, hazardous compartments. While the retrofits marginally increased transit speeds, celebrating such incremental gains overlooks the severe operational perils imposed on the personnel below deck. Real advancement demands that structural reliability and crew survivability take precedence over narrow mechanical metrics.

Which of the following best describes the author's attitude toward the dreadnought steam line refits?

Cevabı ve açıklamayı göster

Cevap: Critical of prioritizing marginal performance gains over crew safety

Cevap

Critical of prioritizing marginal performance gains over crew safety
The author directly critiques the dreadnought refit program, emphasizing that the 'marginal' increase in transit speeds was outweighed by hazardous working conditions and brittle components, concluding that crew safety must take priority over narrow mechanical metrics.

Adım Adım Çözüm

1
Analyze the author's diction and contrasting viewpoints in the passage
The author contrasts the praise of quartermasters ('heralded... as a triumph') with negative realities ('hasty,' 'brittle,' 'hazardous compartments').
Tone is determined by examining word choices, qualifiers, and shifts in perspective.
2
Evaluate the concluding assertion representing the author's core stance
The author concludes that 'celebrating such incremental gains overlooks severe operational perils' and that 'crew survivability' must take precedence.
The concluding sentences summarize the author's evaluative judgment of the refits.
3
Match the synthesized attitude to the corresponding descriptive choice
The stance reflects clear disapproval and criticism of trading safety for minor performance increases.
Selecting the option that accurately captures the nuanced critical stance without exaggerating it into total opposition to technology.

Anahtar Kavram

Inferring Author Tone and Attitude
Tahmini Süre:1m 5s
Soru 4558Soru →

Before steering the cargo vessel into the shallow bay, the captain measured the ship's draft. Because the vessel was fully loaded with heavy machinery, the lowest part of its hull sat significantly deeper in the water than normal, increasing the risk of running aground.

Based on the passage, what does the word 'draft' most nearly mean?

Cevabı ve açıklamayı göster

Cevap: The depth of a vessel's hull beneath the waterline

Cevap

The depth of a vessel's hull beneath the waterline
In nautical contexts, 'draft' refers to the vertical distance between the waterline and the bottom of a ship's hull. The passage clearly supports this meaning by mentioning a 'shallow bay,' the hull sitting 'deeper in the water,' and the danger of 'running aground.'

Adım Adım Çözüm

1
Locate the target word 'draft' and examine the surrounding context clues.
The passage mentions entering a 'shallow bay,' loading 'heavy machinery,' and the hull sitting 'deeper in the water.'
Contextual clues indicate that the passage is discussing the physical position of a ship relative to the water level.
2
Evaluate the meanings of 'draft' against the passage details.
In maritime contexts, 'draft' refers specifically to the distance between the waterline and the bottom of the hull.
This definition directly explains why heavy cargo would cause the vessel to sit deeper and risk hitting bottom in shallow water.

Anahtar Kavram

Analyzing Multiple-Meaning Words in Context
Tahmini Süre:45s
Soru 4559Soru →

Read the following passage:

"During wilderness survival training, recruits must keep their gear meticulously organized. First, they should ensure their drinking supply is potable—that is, completely safe to drink. Second, they must maintain an alert and vigilant watch for sudden weather changes. Finally, team leaders should give concise instructions, keeping briefings short and to the point to prevent confusion."

Match each vocabulary word from the passage with the synonymous clue phrase that directly clarifies its meaning.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

potable
vigilant
concise

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

'potable' matches with 'safe to drink'; 'vigilant' matches with 'alert'; 'concise' matches with 'short and to the point'.
Each vocabulary term is directly explained by a synonymous clue in the passage: 'potable' is explicitly restated as 'safe to drink', 'vigilant' is paired with its coordinate synonym 'alert', and 'concise' is defined by the descriptive phrase 'short and to the point'.

Adım Adım Çözüm

1
Locate 'potable' in the passage and identify the punctuation or transition phrase following it.
The dash and the transition 'that is' introduce 'completely safe to drink'.
The phrase 'that is' functions as an explicit restatement indicator providing a direct synonym.
2
Locate 'vigilant' in the passage and examine words joined to it by coordinating conjunctions.
'Alert' is joined with 'vigilant' using 'and' to describe the watch.
Coordinate adjectives joined by 'and' frequently act as synonymous context clues.
3
Locate 'concise' in the passage and read the modifying phrase immediately after it.
The sentence elaborates on concise instructions with 'keeping briefings short and to the point'.
The modifying clause explains the specific contextual meaning of 'concise'.

Anahtar Kavram

Identifying Synonymous Context Clues
Tahmini Süre:45s
Soru 4560Soru →

Read the following technical maintenance report:

'During deep-sea trials, the vessel's hull integrity was compromised by an insidious micro-fracture that developed undetected over several months. To prevent systemic structural failure, engineers executed a circumscribed reinforcement protocol to isolate the damaged bulkheads. Continuous diagnostic scans confirmed that the acoustic monitoring modules remained impervious to extreme hydrostatic pressure, allowing automated relays to extrapolate stress trajectories across adjacent compartments before catastrophic rupture occurred.'

Based on morphological structure (roots and affixes) and context clues from the passage, match each target word with its precise definition.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

insidious
circumscribed
impervious
extrapolate

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

'insidious' matches 'Developing gradually and stealthily while causing hidden harm'; 'circumscribed' matches 'Confined strictly within specified physical or operational boundaries'; 'impervious' matches 'Incapable of being penetrated, damaged, or affected by external forces'; 'extrapolate' matches 'Projecting or estimating unknown values beyond existing data trends'.
Each word is accurately paired by analyzing its affixes and root morphemes alongside its functional role in the technical excerpt: 'in- + sid-' reflects subtle, ambush-like progression; 'circum- + scrib-' denotes drawing strict operational bounds; 'im- + per- + via' signifies absolute impenetrability; and 'extra-' denotes projection beyond current limits.

Adım Adım Çözüm

1
Analyze the morphemes and context of 'insidious'.
Prefix 'in-' (in/upon) + root 'sid-' (sit) indicates lying in wait; context refers to a flaw that developed undetected over months.
Synthesizing morphological cues with passage details reveals the meaning of stealthy, harmful progression.
2
Analyze the morphemes and context of 'circumscribed'.
Prefix 'circum-' (around) + root 'scrib/script' (write/draw) denotes drawing a line around; context describes isolating damaged bulkheads.
The affixes signify setting limits or boundaries around an area.
3
Analyze the morphemes and context of 'impervious'.
Negative prefix 'im-' + 'per-' (through) + 'via' (way) indicates no passage through; context shows sensors resisting intense hydrostatic pressure.
The word parts collectively denote impenetrability to outside forces.
4
Analyze the morphemes and context of 'extrapolate'.
Prefix 'extra-' (beyond/outside) combined with data analysis context indicates extending calculations to forecast future compartment stress.
The prefix signifies projecting results beyond known parameters.

Anahtar Kavram

Using Latin and Greek roots and affixes in technical passages to deduce exact contextual definitions
Tahmini Süre:1m 30s
ÖncekiSayfa 228 / 261Sonraki