Tüm alıştırma soruları

5215 soru

Soru 4821Soru →

During a physical fitness assessment, 6868 recruits met the advanced standard. If these recruits represent 17%17\% of the total training company, what is the total number of recruits in the company?

Cevabı ve açıklamayı göster

Cevap: 400

Cevap

400
The correct total is found by recognizing the relationship: Part=Rate×Base\text{Part} = \text{Rate} \times \text{Base}. We are given the Part (6868) and the Rate (17%17\% or 0.170.17). To find the Base, we divide the Part by the Rate: 68÷0.17=40068 \div 0.17 = 400.

Adım Adım Çözüm

1
Set up an algebraic equation relating the given part to the unknown whole.
0.17×x=680.17 \times x = 68
The problem states that 17%17\% of the total class (xx) is equal to 6868 recruits.
2
Isolate the variable xx to solve for the total.
x=680.17x = \frac{68}{0.17}
Dividing both sides of the equation by 0.170.17 will leave xx by itself.
3
Perform the division without a calculator.
x=400x = 400
Multiply the numerator and denominator by 100100 to remove the decimal, resulting in 680017\frac{6800}{17}. Since 17×4=6817 \times 4 = 68, 680017\frac{6800}{17} equals 400400.

Anahtar Kavram

Finding the original base when a percentage rate and its corresponding amount are known.
Tahmini Süre:1m 0s
Soru 4822Soru →

Read the passage about turbine engine lubricants and complete the logical conclusion regarding lubricant testing.

Aşağıdaki boşlukları doldurun

Aircraft turbine engine lubricating oils must maintain stable viscosity across extreme operating temperatures. Synthetic ester-based oils resist thermal breakdown at elevated temperatures, preventing sludge accumulation. However, when contaminated with atmospheric moisture over time, ester molecules undergo hydrolysis, splitting into organic acids and alcohols that accelerate bearing corrosion. Therefore, maintenance technicians evaluating degraded turbine oil test not only for viscosity changes, but primarily for increasing levels.
Cevabı ve açıklamayı göster

Cevap

acidity (or acid / organic acid)
The passage establishes that moisture causes ester oil molecules to undergo hydrolysis, splitting into organic acids and alcohols. Because these organic acids accelerate bearing corrosion, testing for increased acidity directly detects whether moisture-driven chemical breakdown has occurred.

Adım Adım Çözüm

1
Identify the primary chemical degradation mechanism triggered by moisture in ester-based oil.
Moisture exposure causes ester molecules to undergo hydrolysis, producing organic acids and alcohols.
Determining the chemical products of hydrolysis identifies what substance accumulates in contaminated oil.
2
Connect the accumulated chemical product to the resulting component failure.
The organic acids generated by hydrolysis directly accelerate bearing corrosion.
Corrosion is driven specifically by acid accumulation rather than thermal breakdown or alcohol generation.
3
Deduce the logical parameter technicians must test to monitor moisture-induced degradation.
Technicians must monitor acidity or acid levels in the lubricant.
Rising acidity serves as the direct indicator of moisture contamination and impending corrosive damage.

Anahtar Kavram

Drawing logical conclusions from cause-and-effect relationships in technical passages
Soru 4823Soru →

Simplify the following algebraic expression completely:

3(4m−2n)−2(3m+5n)−(m−12n)3(4m - 2n) - 2(3m + 5n) - (m - 12n)
Cevabı ve açıklamayı göster

Cevap: 5m - 4n; 5m-4n; -4n + 5m; -4n+5m

Cevap

5m - 4n
To simplify the expression, first apply the distributive property to eliminate the parentheses, taking care to distribute the negative signs properly: 12m−6n−6m−10n−m+12n12m - 6n - 6m - 10n - m + 12n. Then, combine the like terms for mm (12m−6m−m=5m12m - 6m - m = 5m) and the like terms for nn (−6n−10n+12n=−4n-6n - 10n + 12n = -4n) to reach the final answer of 5m−4n5m - 4n.

Adım Adım Çözüm

1
Distribute the coefficients to the terms inside each set of parentheses.
12m−6n−6m−10n−m+12n12m - 6n - 6m - 10n - m + 12n
The distributive property must be applied first to remove parentheses before like terms can be combined.
2
Group the like terms for variables mm and nn.
(12m−6m−m)+(−6n−10n+12n)(12m - 6m - m) + (-6n - 10n + 12n)
Grouping like terms organizes the expression to easily combine their coefficients.
3
Combine the coefficients of the grouped terms.
5m−4n5m - 4n
Evaluating the addition and subtraction of the coefficients yields the fully simplified expression.

Anahtar Kavram

Simplifying Algebraic Expressions
Soru 4824Soru →

During tactical briefing preparations, intelligence specialists review reconnaissance imagery to highlight salient terrain features—that is, the most prominent and easily recognizable landmarks—before issuing patrol maps to ground units. Emphasizing these conspicuous landmarks ensures that dismounted teams can quickly orient themselves without constantly relying on digital satellite positioning in contested operational zones.

Based on the context clues in the passage, which of the following is the best meaning of the word "salient"?

Cevabı ve açıklamayı göster

Cevap: Prominent

Cevap

Prominent
The passage uses an appositive structure introduced by dashes and the transitional phrase 'that is' to directly define 'salient terrain features' as 'the most prominent and easily recognizable landmarks'. Therefore, 'Prominent' is the exact synonymous meaning supported by the text.

Adım Adım Çözüm

1
Locate the target vocabulary word in the passage
Identified 'salient' in the phrase 'salient terrain features—that is, the most prominent and easily recognizable landmarks—before issuing patrol maps'.
Finding the specific sentence allows identification of the surrounding structural context clues.
2
Analyze the punctuation and transitional phrase following the target word
Recognized the dash followed by the phrase 'that is', which introduces an explicit synonymous restatement.
Phrases like 'that is' set off by dashes serve as direct appositive synonyms defining unfamiliar terms.
3
Extract the synonymous meaning and match with the answer choices
The phrase 'the most prominent and easily recognizable landmarks' matches the term 'Prominent'.
Selecting the direct synonym stated in the passage confirms the intended contextual meaning.

Anahtar Kavram

Identifying direct synonymous restatements and appositives
Tahmini Süre:1m 0s
Soru 4825Soru →

When conducting a pre-mission inspection on the Tactical Fuel Distribution System (TFDS), technicians must follow precise timing and pressure guidelines. The initial self-test on the electronic control module takes 45 seconds to complete. Once active, the intake booster pump operates for 15 minutes in circulation mode before fuel transfer begins. If line pressure fluctuates, the automatic safety valve shuts down flow within 5 seconds. Operators must record pressure readings every 30 minutes throughout the refueling operation.

According to the passage, how long does the electronic control module take to complete its initial self-test?

Cevabı ve açıklamayı göster

Cevap: 45 seconds

Cevap

45 seconds
The passage explicitly states that 'the initial self-test on the electronic control module takes 45 seconds to complete.' Directly pairing the specified component with its corresponding stated time duration confirms that 45 seconds is the correct figure.

Adım Adım Çözüm

1
Locate the specific target entity in the prompt within the text.
Identified the sentence discussing the 'initial self-test on the electronic control module.'
The question asks specifically about the duration of the electronic control module self-test.
2
Extract the precise quantitative detail paired with that target entity.
Extracted '45 seconds'.
The text directly links '45 seconds' to the completion of the module's self-test, distinguishing it from other numerical figures in the passage.

Anahtar Kavram

Locating a specific named technical component in a passage and extracting its exact numerical value while filtering out surrounding numerical distractors.
Tahmini Süre:45s
Soru 4826Soru →

A military transport aircraft has a maximum cargo capacity of 15,000 kilograms15,000 \text{ kilograms}. The aircraft is currently loaded with 19,800 pounds19,800 \text{ pounds} of equipment. If 1 kilogram1 \text{ kilogram} is equal to 2.2 pounds2.2 \text{ pounds}, how much additional cargo, in kilograms, can the aircraft carry?

Cevabı ve açıklamayı göster

Cevap: 6000

Cevap

6000
The remaining capacity is found by first standardizing all measurements to kilograms (19,800 pounds÷2.2=9,000 kilograms19,800 \text{ pounds} \div 2.2 = 9,000 \text{ kilograms}), and then subtracting this from the total allowance (15,000 kg−9,000 kg=6,000 kg15,000 \text{ kg} - 9,000 \text{ kg} = 6,000 \text{ kg}).

Adım Adım Çözüm

1
Convert the current load from pounds to kilograms.
19,800÷2.2=9,000 kg19,800 \div 2.2 = 9,000 \text{ kg}
Since the maximum capacity is given in kilograms and the final answer must be in kilograms, the current load must be converted to the metric system.
2
Subtract the current load from the maximum cargo capacity.
15,000−9,000=6,000 kg15,000 - 9,000 = 6,000 \text{ kg}
Subtracting the weight already on board from the maximum allowable weight gives the remaining available capacity.

Anahtar Kavram

Converting units between the US Customary and metric systems using a given conversion factor, followed by basic arithmetic subtraction.
Soru 4827Soru →

A military mess hall prepares meals using a ratio of 44 pounds of potatoes for every 1515 soldiers. How many pounds of potatoes are needed to feed 6060 soldiers?

Cevabı ve açıklamayı göster

Cevap: 16; 16 pounds; 16 lbs; 16 lb

Cevap

16
Since the ratio of potatoes to soldiers is constant, and the number of soldiers increases by a scale factor of 44 (from 1515 to 6060), the pounds of potatoes must also be multiplied by 44 (4×4=164 \times 4 = 16).

Adım Adım Çözüm

1
Set up a proportion matching pounds of potatoes to the number of soldiers.
415=x60\frac{4}{15} = \frac{x}{60}
This proportion relates the known ratio (44 pounds for 1515 soldiers) to the unknown quantity xx for 6060 soldiers.
2
Solve for the unknown quantity xx.
x=4×6015=4×4=16x = \frac{4 \times 60}{15} = 4 \times 4 = 16
Solving the equation gives the total pounds of potatoes needed to maintain the same ratio.

Anahtar Kavram

Direct Proportions
Tahmini Süre:45s
Soru 4828Soru →

What is the evaluated result of the expression shown below?

24÷23×3−(5−8)2+∣−10∣ 24 \div 2^3 \times 3 - (5 - 8)^2 + |-10|
Cevabı ve açıklamayı göster

Cevap: 10

Cevap

The correct result is 10, achieved by evaluating grouping symbols and exponents first, followed by left-to-right division and multiplication, and finally left-to-right subtraction and addition.
The correct answer is 10. By following the standard order of operations, grouping symbols and exponents are resolved first to yield 24÷8×3−9+1024 \div 8 \times 3 - 9 + 10. Next, executing multiplication and division strictly from left to right gives 9−9+109 - 9 + 10. Finally, executing addition and subtraction strictly from left to right yields 0+10=100 + 10 = 10.

Adım Adım Çözüm

1
Simplify the expressions inside the parentheses and absolute value bars.
24÷23×3−(−3)2+10 24 \div 2^3 \times 3 - (-3)^2 + 10
Grouping symbols must be resolved first according to the standard order of operations.
2
Evaluate the exponential terms.
24÷8×3−9+10 24 \div 8 \times 3 - 9 + 10
Exponents are the second priority step and must be resolved before multiplication or division.
3
Perform multiplication and division sequentially from left to right.
First, 24÷8=3 24 \div 8 = 3 . Then, 3×3=9 3 \times 3 = 9 . The expression becomes 9−9+10 9 - 9 + 10 .
Multiplication and division share the exact same priority level and must be executed strictly from left to right.
4
Perform addition and subtraction sequentially from left to right.
First, 9−9=0 9 - 9 = 0 . Then, 0+10=10 0 + 10 = 10 .
Addition and subtraction share the same priority level and must also be executed strictly from left to right.

Anahtar Kavram

Order of Operations (PEMDAS/BODMAS) and Left-to-Right Priority
Tahmini Süre:1m 0s
Soru 4829Soru →

A military base assigns personnel to guard duty and patrol duty in a ratio of 5:25:2. If there are 4040 personnel assigned to guard duty, what is the total number of personnel assigned to both duties combined?

Cevabı ve açıklamayı göster

Cevap: 56

Cevap

The total number of personnel assigned to both duties is 56.
The correct answer accurately determines that 5 parts equal 40 personnel, meaning 1 part is equal to 8 personnel. The total number of personnel represents 7 parts in total (5 + 2). Multiplying 7 total parts by 8 personnel per part results in 56 total personnel.

Adım Adım Çözüm

1
Determine the value of one part of the ratio.
1 part = 8 personnel
The ratio of guard to patrol duty is 5:2, meaning 5 parts correspond to the 40 personnel on guard duty. Dividing 40 by 5 gives the value of a single part.
2
Calculate the total number of parts in the given ratio.
Total parts = 7
The total personnel is the sum of guard duty parts (5) and patrol duty parts (2).
3
Multiply the total parts by the value of one part.
7 × 8 = 56 personnel
Multiplying the total number of parts by the personnel value of each individual part gives the combined total.

Anahtar Kavram

Solving part-to-whole ratio problems by determining the value of a single unit part.
Soru 4830Soru →

Unlike modern digital diagnostic scanners that are lightweight and easy to maneuver through cramped aircraft compartments, the original analog test consoles were distinctly unwieldy. Technicians frequently required mechanical hoists and multiple assistants just to position the heavy equipment inside the engine bay for routine inspections.

As used in the passage, what does the word "unwieldy" most nearly mean?

Cevabı ve açıklamayı göster

Cevap: Awkward to handle and position

Cevap

Awkward to handle and position
The passage establishes a direct contrast between modern scanners and the original consoles using the transitional indicator 'Unlike.' Because modern scanners are described as 'lightweight and easy to maneuver,' the contrasting term 'unwieldy' must mean difficult or awkward to handle and move. This is further reinforced by the passage describing the need for mechanical hoists and multiple assistants to position the equipment.

Adım Adım Çözüm

1
Identify the contrast signal word and the two subjects being compared.
The word 'Unlike' introduces an explicit contrast between modern digital scanners and original analog consoles.
Contrast words indicate that the characteristics of the two subjects will be antonymous or opposing.
2
Examine the context clues describing the contrasting subject.
Modern scanners are described as 'lightweight and easy to maneuver.'
These attributes serve as the antonym clue for the target word 'unwieldy.'
3
Deduce the meaning of the target word and verify with supporting context.
The word 'unwieldy' means the opposite of easy to maneuver—bulky, awkward, or difficult to manage—which is confirmed by the need for hoists and extra personnel.
Synthesizing the antonym clue with the sentence's supporting details confirms the correct definition.

Anahtar Kavram

Identifying Antonym and Contrast Context Clues
Tahmini Süre:1m 0s
Soru 4831Soru →

Solve the following inequality for xx:

−2x+6≤14-2x + 6 \leq 14

Which of the following is the correct solution?

Cevabı ve açıklamayı göster

Cevap: x≥−4x \geq -4

Cevap

The correct solution is x≥−4x \geq -4.
The correct answer is found by subtracting 6 from 14 to get 8, and then dividing 8 by -2. Because we divided by a negative number, the less than or equal to symbol (≤\leq) must flip to a greater than or equal to symbol (≥\geq), yielding x≥−4x \geq -4.

Adım Adım Çözüm

1
Subtract 6 from both sides of the inequality to isolate the variable term.
−2x≤14−6-2x \leq 14 - 6
−2x≤8-2x \leq 8
This is the first step in using inverse operations to isolate xx.
2
Divide both sides by −2-2 and reverse the inequality symbol.
x≥8÷(−2)x \geq 8 \div (-2)
x≥−4x \geq -4
When multiplying or dividing an inequality by a negative number, the direction of the inequality sign must be flipped.

Anahtar Kavram

Solving One-Variable Inequalities
Soru 4832Soru →

A logistics facility implements an energy-saving program that reduces its daily electricity consumption by 20%20\%. Six months later, expanded operations require the facility to increase its new, reduced consumption by 30%30\%. What is the net percentage change in the facility's daily electricity consumption compared to the original amount?

Cevabı ve açıklamayı göster

Cevap: 4%4\% increase

Cevap

The net change is a 4%4\% increase compared to the original electricity consumption.
To find the net percentage change, each change must be applied sequentially. A 20%20\% decrease leaves 80%80\% of the original amount. A subsequent 30%30\% increase is calculated on this 80%80\% (0.30×80%=24%0.30 \times 80\% = 24\%). Adding this to the reduced amount gives 80%+24%=104%80\% + 24\% = 104\%. The final amount is 104%104\% of the original, representing a 4%4\% net increase.

Adım Adım Çözüm

1
Establish an initial baseline value to simplify calculations.
Assume the original daily electricity consumption is 100100 units.
Using 100100 makes percentage calculations intuitive and straightforward.
2
Calculate the consumption after the initial 20%20\% reduction.
100−(0.20×100)=80100 - (0.20 \times 100) = 80 units.
The facility reduces its original consumption by 20%20\%.
3
Calculate the final consumption after the subsequent 30%30\% increase.
80+(0.30×80)=80+24=10480 + (0.30 \times 80) = 80 + 24 = 104 units.
The 30%30\% increase must be applied to the new, reduced base of 8080 units, not the original 100100 units.
4
Determine the net percentage change from the original baseline.
104−100=+4104 - 100 = +4, which represents a 4%4\% increase.
Comparing the final amount (104104) to the original amount (100100) yields the exact net percentage change.

Anahtar Kavram

Successive Percentage Changes
Soru 4833Soru →

What is the correct solution set for the inequality shown below?

4(x−1)−2(x+3)≥5x+24(x - 1) - 2(x + 3) \geq 5x + 2
Cevabı ve açıklamayı göster

Cevap: x≤−4x \leq -4

Cevap

The correct solution set is x≤−4x \leq -4.
The correct answer is derived by carefully distributing the coefficients, combining like terms, isolating the variable xx, and applying the rule to reverse the inequality symbol when dividing by a negative number.

Adım Adım Çözüm

1
Distribute the values 44 and −2-2 into their respective parentheses on the left side.
4x−4−2x−6≥5x+24x - 4 - 2x - 6 \geq 5x + 2
This step removes the parentheses and prepares the terms for grouping.
2
Combine the like terms on the left side of the inequality.
2x−10≥5x+22x - 10 \geq 5x + 2
Simplifying expressions on each side makes it easier to isolate the variable.
3
Subtract 5x5x from both sides, and add 1010 to both sides.
−3x≥12-3x \geq 12
This moves all variable terms to the left side and all constant terms to the right side.
4
Divide both sides by −3-3 and reverse the direction of the inequality symbol.
x≤−4x \leq -4
When dividing or multiplying an inequality by a negative number, the relationship between the two sides inverses, so the sign must be flipped.

Anahtar Kavram

Solving one-variable linear inequalities requires isolating the variable using inverse operations, and reversing the inequality symbol when multiplying or dividing by a negative number.
Soru 4834Soru →

What is the result of fully expanding and simplifying the given algebraic expression?

−4k(2k−3m)+5k(k−2m)−3k2-4k(2k - 3m) + 5k(k - 2m) - 3k^2
Cevabı ve açıklamayı göster

Cevap: −6k2+2km-6k^2 + 2km

Cevap

The correct simplified expression is −6k2+2km-6k^2 + 2km.
The correct answer accurately expands the expression by distributing −4k-4k to get −8k2+12km-8k^2 + 12km, and 5k5k to get 5k2−10km5k^2 - 10km. Grouping the k2k^2 terms (−8+5−3=−6-8 + 5 - 3 = -6) and the kmkm terms (12−10=212 - 10 = 2) yields −6k2+2km-6k^2 + 2km.

Adım Adım Çözüm

1
Distribute −4k-4k across the terms inside the first set of parentheses: (2k−3m)(2k - 3m).
−8k2+12km-8k^2 + 12km
To eliminate the first grouping symbol, being careful to multiply the negative signs properly (−4k×−3m=+12km-4k \times -3m = +12km).
2
Distribute 5k5k across the terms inside the second set of parentheses: (k−2m)(k - 2m).
5k2−10km5k^2 - 10km
To eliminate the second grouping symbol.
3
Write out the complete expanded expression by combining the results and the remaining −3k2-3k^2 term.
−8k2+12km+5k2−10km−3k2-8k^2 + 12km + 5k^2 - 10km - 3k^2
This shows all individual terms ready for grouping.
4
Identify and combine the like terms: the k2k^2 terms (−8k2-8k^2, 5k25k^2, −3k2-3k^2) and the kmkm terms (12km12km, −10km-10km).
−6k2+2km-6k^2 + 2km
Combining like coefficients (−8+5−3=−6-8 + 5 - 3 = -6 and 12−10=212 - 10 = 2) provides the final simplified expression in standard form.

Anahtar Kavram

Applying the distributive property with negative numbers and combining multivariable like terms.
Soru 4835Soru →

Match each algebraic expression with its simplified equivalent form.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

x3⋅x2x^3 \cdot x^2
x8x2\frac{x^8}{x^2}
(x4)2(x^4)^2
x−3x^{-3}

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

The matches are: x3⋅x2x^3 \cdot x^2 simplifies to x5x^5, x8x2\frac{x^8}{x^2} simplifies to x6x^6, (x4)2(x^4)^2 simplifies to x8x^8, and x−3x^{-3} simplifies to 1x3\frac{1}{x^3}.
Each expression correctly pairs with its simplified form by applying the four fundamental rules of exponents: the product rule, the quotient rule, the power of a power rule, and the negative exponent rule.

Adım Adım Çözüm

1
Apply the product rule for exponents to x3⋅x2x^3 \cdot x^2.
x3+2=x5x^{3+2} = x^5
Multiplying identical bases requires adding the exponents.
2
Apply the quotient rule for exponents to x8x2\frac{x^8}{x^2}.
x8−2=x6x^{8-2} = x^6
Dividing identical bases requires subtracting the denominator's exponent.
3
Apply the power rule for exponents to (x4)2(x^4)^2.
x4⋅2=x8x^{4 \cdot 2} = x^8
Raising an exponent to another power requires multiplying the exponents.
4
Apply the negative exponent rule to x−3x^{-3}.
1x3\frac{1}{x^3}
A negative exponent signifies the reciprocal of the corresponding positive exponent.

Anahtar Kavram

Operations with Variable Exponents
Tahmini Süre:1m 0s
Soru 4836Soru →

Match each unsimplified algebraic expression with its correctly simplified equivalent.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

2(3y+4)2(3y + 4)
5y+2y−35y + 2y - 3
−3(y−2)-3(y - 2)
4y+2z−y+3z4y + 2z - y + 3z

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

The correct pairings map each unsimplified expression to its distributed and combined form.
Each expression on the left is matched with its simplified form on the right by accurately applying the distributive property and combining like terms.

Adım Adım Çözüm

1
Simplify the first expression: 2(3y + 4).
6y + 8
Multiply the outer term 2 by both terms inside the parentheses (3y and 4).
2
Simplify the second expression: 5y + 2y - 3.
7y - 3
Add the coefficients of the like terms containing y (5 and 2).
3
Simplify the third expression: -3(y - 2).
-3y + 6
Distribute the -3, noting that a negative multiplied by a negative results in a positive (+6).
4
Simplify the fourth expression: 4y + 2z - y + 3z.
3y + 5z
Group and add the coefficients of the y terms together, and the z terms together.

Anahtar Kavram

Simplifying Algebraic Expressions
Soru 4837Soru →

Read the following passage:

Modern grain storage silos utilize automated nitrogen purging systems to suppress aerobic fungal growth and eliminate combustible dust explosions. When grain is loaded, ambient air is displaced by injected nitrogen until oxygen levels fall below 8 percent. Fungal spores require at least 12 percent oxygen to metabolize, and dust combustion reactions cannot propagate below 10 percent oxygen. Consequently, maintaining this controlled atmosphere preserves grain quality without chemical fungicides.

Statement:
Based on the passage, an oxygen concentration of 9 percent inside a silo is sufficient to prevent dust explosions while still permitting aerobic fungal growth.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. An oxygen concentration of 9 percent is below both the 10 percent limit required for dust combustion and the 12 percent threshold necessary for fungal metabolism, so fungal growth is also suppressed.
The statement is false because an oxygen level of 9 percent is below the 12 percent threshold required for fungal metabolism, meaning fungal growth is prevented alongside dust combustion.

Adım Adım Çözüm

1
Extract the oxygen threshold required for dust combustion reactions from the passage.
Dust combustion reactions cannot propagate when oxygen is below 10 percent.
Establishes the minimum environmental threshold for preventing dust explosions.
2
Extract the oxygen threshold required for aerobic fungal spore metabolism from the passage.
Fungal spores require at least 12 percent oxygen to metabolize.
Establishes the minimum environmental threshold for fungal growth.
3
Evaluate the effect of a 9 percent oxygen concentration against both thresholds.
Because 9 percent is less than 10 percent, dust combustion cannot propagate; because 9 percent is also less than 12 percent, fungal spores cannot metabolize.
Synthesizes the given constraints to deduce whether the statement is logically valid.

Anahtar Kavram

Deducing combined environmental outcomes from multi-threshold textual constraints
Tahmini Süre:1m 0s
Soru 4838Soru →

Read the following technical maintenance excerpt:

"When repairing damaged carbon-composite aircraft panels, technicians inspect the cured resin matrix to ensure the patch is cohesive—that is, firmly bonded into a single unified mass. The surface must also remain unblemished, meaning entirely free of cracks or surface defects, before primer application. Additionally, any structural filler used during edge sealing must be malleable, or easily shaped and worked by hand, to guarantee an airtight aerodynamic seal."

Based on the synonymous context clues in the passage, match each vocabulary term with its contextual definition.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

cohesive
unblemished
malleable

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

'cohesive' pairs with 'Firmly bonded into a single unified mass'; 'unblemished' pairs with 'Entirely free of cracks or surface defects'; 'malleable' pairs with 'Easily shaped and worked by hand'.
Each vocabulary term is accompanied by a specific synonymous indicator within the sentence: 'cohesive' is offset by 'that is' followed by 'firmly bonded into a single unified mass'; 'unblemished' is explicitly clarified by 'meaning entirely free of cracks or surface defects'; and 'malleable' is linked via 'or' to 'easily shaped and worked by hand.' These explicit textual clues provide unambiguous matches for each term.

Adım Adım Çözüm

1
Locate the word 'cohesive' in the text and inspect the punctuation and transition words immediately following it.
The dash and the phrase 'that is' introduce the direct definition 'firmly bonded into a single unified mass.'
Writers frequently use dashes and 'that is' to restate an unfamiliar technical term with an accessible synonym.
2
Locate the word 'unblemished' and identify the explanatory clause attached to it.
The participle 'meaning' introduces the definition 'entirely free of cracks or surface defects.'
The word 'meaning' functions as an explicit signal that a synonymous explanation is following.
3
Locate the word 'malleable' and evaluate the parallel phrasing offset by commas.
The coordinating conjunction 'or' connects 'malleable' directly to 'easily shaped and worked by hand.'
The conjunction 'or' is often used to present a familiar synonym for a specialized word.

Anahtar Kavram

Identifying Synonymous Context Clues (Appositives, Restatement Markers, and Parallel Synonyms)

Alternatif Yöntem

Scan the passage directly for structural clue markers such as dashes, 'that is', 'meaning', and introductory 'or' to extract the definitions before evaluating the rest of the text.
Tahmini Süre:1m 0s
Soru 4839Soru →

Read the following technical passage and complete the statement below based directly on the provided facts.

Aşağıdaki boşlukları doldurun

Hydraulic accumulators in heavy transport aircraft store fluid under pressure to operate emergency brakes and landing gear. A flexible synthetic rubber bladder separates the hydraulic fluid from a sealed chamber of dry nitrogen gas. During preflight maintenance, technicians measure the nitrogen precharge pressure using a dedicated Schrader valve while the hydraulic system is fully depressurized. If the nitrogen precharge drops below 1,500 psi, the accumulator cannot deliver sufficient volume during rapid emergency extension cycles.

According to the passage, the hydraulic fluid is separated from the nitrogen gas chamber by a
.
Cevabı ve açıklamayı göster

Cevap

synthetic rubber bladder (or flexible synthetic rubber bladder / rubber bladder / bladder)
The passage explicitly states: 'A flexible synthetic rubber bladder separates the hydraulic fluid from a sealed chamber of dry nitrogen gas.' Therefore, the synthetic rubber bladder is the exact component that performs this function.

Adım Adım Çözüm

1
Scan the passage for keywords related to the separation between the hydraulic fluid and the nitrogen gas.
Found the explicit sentence: 'A flexible synthetic rubber bladder separates the hydraulic fluid from a sealed chamber of dry nitrogen gas.'
Direct fact retrieval requires locating the exact sentence that identifies the physical barrier.
2
Extract the specific component named in that sentence.
The text directly identifies the component as the flexible synthetic rubber bladder.
The question asks specifically for the component performing the separation as stated in the text.

Anahtar Kavram

Direct factual detail retrieval from a technical passage
Tahmini Süre:45s
Soru 4840Soru →

When the expression (8.0×104)×(6.0×10−7)1.5×103\frac{(8.0 \times 10^4) \times (6.0 \times 10^{-7})}{1.5 \times 10^3} is evaluated and the result is written in standard scientific notation as a×10na \times 10^n, where 1≤a<101 \le a < 10, what is the value of the integer nn?

Cevabı ve açıklamayı göster

Cevap: -5

Cevap

The exponent is -5.
Evaluating the numerator yields 48×10−348 \times 10^{-3}. Dividing this by the denominator 1.5×1031.5 \times 10^3 results in 32×10−632 \times 10^{-6}. To write this in standard scientific notation, the coefficient must be strictly greater than or equal to 1 and strictly less than 10, so 32 is rewritten as 3.2×1013.2 \times 10^1. Applying this shift makes the final expression 3.2×10−53.2 \times 10^{-5}. Thus, the final exponent nn is -5.

Adım Adım Çözüm

1
Multiply the expressions in the numerator
48×10−348 \times 10^{-3}
Following the order of operations, simplify the numerator first by multiplying the coefficients (8.0×6.0=488.0 \times 6.0 = 48) and adding the exponents of the base 10 (4+(−7)=−34 + (-7) = -3).
2
Divide by the denominator
32×10−632 \times 10^{-6}
Divide the resulting numerator's coefficient by the denominator's coefficient (48÷1.5=3248 \div 1.5 = 32) and subtract the denominator's exponent from the numerator's exponent (−3−3=−6-3 - 3 = -6).
3
Normalize the coefficient to standard scientific notation
3.2×10−53.2 \times 10^{-5}
Standard scientific notation requires the coefficient (aa) to be between 1 and 10. We rewrite 3232 as 3.2×1013.2 \times 10^1. Multiplying this by the existing 10−610^{-6} changes the overall exponent to 1+(−6)=−51 + (-6) = -5.
4
Identify the final value of nn
-5
The question asks for the integer nn from the format a×10na \times 10^n. Comparing our final result 3.2×10−53.2 \times 10^{-5} to this format, n=−5n = -5.

Anahtar Kavram

Operations with scientific notation and coefficient normalization
ÖncekiSayfa 242 / 261Sonraki
Tüm alıştırma soruları — Armed Services Vocational Aptitude Battery (ASVAB) | Examkin