Inclined Planes Alıştırma Soruları — Armed Services Vocational Aptitude Battery (ASVAB)

Soru 1Soru →

A worker needs to load a heavy crate onto the back of a truck. Instead of lifting it straight up from the ground, the worker uses a long wooden ramp. Assuming friction is negligible, what is the primary mechanical benefit of using this inclined plane?

It decreases the amount of effort force required to move the crate.

It decreases the total amount of work required to load the crate.

It decreases the actual weight of the crate while it is moving up the slope.

It reduces the surface area of the crate in contact with the ground, decreasing friction.

Cevabı ve açıklamayı göster

Cevap: It decreases the amount of effort force required to move the crate.

Cevap

The primary benefit of using an inclined plane is that it decreases the amount of effort force required to move the crate.

An inclined plane allows the same amount of work to be completed over a longer distance. Because work equals force multiplied by distance, increasing the distance proportionally reduces the amount of effort force needed to move the object.

Adım Adım Çözüm

1

Identify the purpose of using simple machines like an inclined plane.

Simple machines are used to provide a mechanical advantage.

Understanding the fundamental function of simple machines is key to solving the problem.

2

Evaluate the relationship between work, force, and distance for an inclined plane.

The formula for work is

W = F \times d

. The total work to lift the crate to the truck bed remains exactly the same.

Conservation of energy dictates that the total work done against gravity is independent of the path taken.

3

Determine how the inclined plane changes the variables in the work equation.

Because the ramp increases the distance (

d

) over which the work is performed, the required effort force (

F

) decreases proportionally.

This inverse relationship between force and distance is the defining characteristic of an inclined plane's mechanical advantage.

Anahtar Kavram

Mechanical Advantage of Inclined Planes

Tahmini Süre:45s

Soru 2Soru →

A worker must load a $500\text{ lb}$ crate into a truck bed that is $4\text{ ft}$ off the ground. He can choose between two ramps. Ramp X is $8\text{ ft}$ long and operates as an ideal, frictionless machine. Ramp Y is $16\text{ ft}$ long, but has a rough surface that reduces its mechanical efficiency to $50\%$ . How do the required effort force and total work input compare when using Ramp Y instead of Ramp X?

Ramp Y requires the exact same effort force but twice the total work.

Ramp Y requires half the effort force and the exact same total work.

Ramp Y requires half the effort force but twice the total work.

Ramp Y requires twice the effort force and twice the total work.

Cevabı ve açıklamayı göster

Cevap: Ramp Y requires the exact same effort force but twice the total work.

Cevap

Ramp Y requires the exact same effort force but twice the total work.

Although Ramp Y is twice as long as Ramp X (which ideally cuts the required force in half), its 50% efficiency means half of the worker's effort is wasted fighting friction. These two factors perfectly cancel each other out, resulting in the exact same effort force of 250 lbs. However, because the worker is applying that same 250 lbs of force over twice the distance (16 ft instead of 8 ft), the total work performed is doubled.

Adım Adım Çözüm

1

Calculate the useful work output required to lift the crate.

\text{Work}_{\text{out}} = \text{Load} \times \text{Height} = 500\text{ lb} \times 4\text{ ft} = 2,000\text{ ft-lb}

.

This baseline value is the minimum energy required to achieve the lift regardless of the ramp used.

2

Evaluate the effort force and work input for Ramp X.

\text{IMA}_{\text{X}} = \frac{8\text{ ft}}{4\text{ ft}} = 2

.

\text{Effort}_{\text{X}} = \frac{500\text{ lb}}{2} = 250\text{ lb}

.

\text{Work}_{\text{in X}} = 250\text{ lb} \times 8\text{ ft} = 2,000\text{ ft-lb}

.

Because Ramp X is frictionless (100% efficient), work input equals work output, and the force is simply the load divided by the IMA.

3

Calculate the total work input required for Ramp Y.

\text{Efficiency} = \frac{\text{Work}_{\text{out}}}{\text{Work}_{\text{in}}}

. So,

0.50 = \frac{2,000}{\text{Work}_{\text{in}}}

, resulting in

\text{Work}_{\text{in Y}} = 4,000\text{ ft-lb}

.

Friction wastes energy as heat. A 50% efficiency means twice as much energy must be put into the system to get the required useful work out.

4

Calculate the effort force required for Ramp Y.

\text{Work}_{\text{in}} = \text{Effort} \times \text{Distance}

.

4,000\text{ ft-lb} = \text{Effort}_{\text{Y}} \times 16\text{ ft}

.

\text{Effort}_{\text{Y}} = 250\text{ lb}

.

Force can be derived by dividing the total actual work input by the total distance the force is applied.

5

Compare the force and work values between the two ramps.

Effort force is identical (

250\text{ lb}

for both). Total work for Ramp Y (

4,000\text{ ft-lb}

) is twice that of Ramp X (

2,000\text{ ft-lb}

).

This establishes the final correct comparison.

Anahtar Kavram

Actual Mechanical Advantage and Efficiency

Soru 3Soru →

A worker needs to move a heavy crate into a truck bed that is $3$ feet above the ground. The worker is deciding whether to use an $8$ -foot ramp or a $12$ -foot ramp. Assuming friction is negligible, which of the following statements correctly describes the effect of using the $12$ -foot ramp instead of the $8$ -foot ramp?

It requires the same effort force, but increases the total work performed due to the longer distance.

It decreases both the required effort force and the total work performed.

It decreases the required effort force, but the total work performed remains the same.

It increases the required effort force because the crate must be pushed over a greater distance.

Cevabı ve açıklamayı göster

Cevap: It decreases the required effort force, but the total work performed remains the same.

Cevap

The

12

-foot ramp decreases the required effort force, but the total work performed remains the same.

A longer inclined plane provides a greater Ideal Mechanical Advantage, which means the effort force is reduced. However, because this smaller force must be applied over a proportionally longer distance, the total work done (

W = F \times d

) remains constant. In the absence of friction, the work done equals the work required to lift the load straight up.

Adım Adım Çözüm

1

Determine the relationship between ramp length and Ideal Mechanical Advantage (IMA).

IMA is calculated as ramp length divided by vertical height. The

12

-foot ramp has a greater IMA than the

8

-foot ramp since both reach the same height of

3

feet.

To establish how the machine alters the required input force.

2

Determine the effect of a greater IMA on effort force.

A higher IMA means less effort force is required to move the same load. Therefore, the

12

-foot ramp requires less effort force.

Effort force is inversely proportional to mechanical advantage.

3

Evaluate the effect of ramp length on total work performed.

Work is the product of force and distance (

W = F \times d

). The smaller force applied over the longer

12

-foot distance equals the larger force applied over the

8

-foot distance. Total work remains unchanged.

Simple machines conserve energy; they cannot reduce the total amount of work required.

Anahtar Kavram

Work and Force Relationship on Inclined Planes

Tahmini Süre:1m 0s

Soru 4Soru →

A logistics crew needs to load an $800\text{ lb}$ supply crate onto a transport plane whose cargo deck is $6\text{ ft}$ above the tarmac. The crew can apply a maximum combined effort force of $200\text{ lb}$ . Assuming friction is negligible, what is the minimum ramp length required, and what is the total work done to lift the crate?

Minimum ramp length of

24\text{ ft}

; total work of

4,800\text{ ft-lb}

Minimum ramp length of

24\text{ ft}

; total work of

1,200\text{ ft-lb}

Minimum ramp length of

4\text{ ft}

; total work of

4,800\text{ ft-lb}

Minimum ramp length of

24\text{ ft}

; total work of

19,200\text{ ft-lb}

Cevabı ve açıklamayı göster

Cevap: Minimum ramp length of $24\text{ ft}$ ; total work of $4,800\text{ ft-lb}$

Cevap

Minimum ramp length of

24\text{ ft}

; total work of

4,800\text{ ft-lb}

The Ideal Mechanical Advantage required is the load divided by the effort (800 / 200 = 4). Since IMA also equals length divided by height, the length must be 4 times the height (4 * 6 = 24 ft). Total work is the force times the distance it moves in the direction of the force, which can be calculated as Load * Height (800 * 6 = 4,800 ft-lb) or Effort * Length (200 * 24 = 4,800 ft-lb).

Adım Adım Çözüm

1

Calculate the required Ideal Mechanical Advantage (IMA).

\text{IMA} = \frac{\text{Load}}{\text{Effort}} = \frac{800\text{ lb}}{200\text{ lb}} = 4

The IMA tells us how much the machine (ramp) multiplies the applied force.

2

Calculate the minimum ramp length using the IMA and the given height.

\text{Length} = \text{IMA} \times \text{Height} = 4 \times 6\text{ ft} = 24\text{ ft}

For an inclined plane,

\text{IMA} = \frac{\text{Length}}{\text{Height}}

. Rearranging gives

\text{Length} = \text{IMA} \times \text{Height}

.

3

Calculate the total work done.

\text{Work} = \text{Load} \times \text{Height} = 800\text{ lb} \times 6\text{ ft} = 4,800\text{ ft-lb}

Work can be calculated as the vertical work required to lift the load. Alternatively,

\text{Work} = \text{Effort} \times \text{Length} = 200\text{ lb} \times 24\text{ ft} = 4,800\text{ ft-lb}

.

Anahtar Kavram

The Ideal Mechanical Advantage of an inclined plane dictates its proportions (length vs. height) to reduce effort force, while the total work done remains constant (conservation of energy).

Soru 5Soru →

A logistics team is evaluating different ramp configurations to push heavy equipment into a warehouse. Calculate the ideal mechanical advantage (IMA) for each ramp. Order the following ramps from the GREATEST mechanical advantage (requires the least effort force) to the LEAST mechanical advantage (requires the most effort force).

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from greatest to least mechanical advantage is: the 5m long / 1m high ramp, the 8m long / 2m high ramp, the 9m long / 3m high ramp, and finally the 4m long / 2m high ramp.

The correct order requires calculating the Ideal Mechanical Advantage (IMA = Length / Height) for each ramp and arranging them in descending order. The 5m/1m ramp has an IMA of 5. The 8m/2m ramp has an IMA of 4. The 9m/3m ramp has an IMA of 3. The 4m/2m ramp has an IMA of 2.

Adım Adım Çözüm

1

Recall the formula for the Ideal Mechanical Advantage (IMA) of an inclined plane.

IMA = Length of the incline ÷ Vertical height (IMA = L / h).

This formula determines how much the ramp multiplies the applied force.

2

Calculate the IMA for the ramp with a length of 5 meters and a height of 1 meter.

IMA = 5 ÷ 1 = 5.

Direct application of the IMA formula.

3

Calculate the IMA for the ramp with a length of 8 meters and a height of 2 meters.

IMA = 8 ÷ 2 = 4.

Direct application of the IMA formula.

4

Calculate the IMA for the ramp with a length of 9 meters and a height of 3 meters.

IMA = 9 ÷ 3 = 3.

Direct application of the IMA formula.

5

Calculate the IMA for the ramp with a length of 4 meters and a height of 2 meters.

IMA = 4 ÷ 2 = 2.

Direct application of the IMA formula.

6

Order the calculated IMA values from greatest to least.

5, then 4, then 3, then 2.

The question asks for the order from greatest mechanical advantage to least.

Anahtar Kavram

The ideal mechanical advantage of an inclined plane is calculated by dividing the length of the incline by the vertical height (IMA = L / h). A greater IMA means less effort force is required to move an object up the ramp.

Tahmini Süre:1m 0s

Soru 6Soru →

Calculate the total effort force required for each scenario and arrange the following inclined plane configurations in order from the GREATEST required effort force to the LEAST required effort force.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from greatest to least effort force is: 240 lb crate (90 lb effort), 160 lb crate (80 lb effort), 300 lb crate (75 lb effort), and 450 lb crate (70 lb effort).

The total effort force required is the sum of the ideal effort (weight divided by IMA) and the friction force. For the 240 lb crate, the total effort is 90 lb. For the 160 lb crate, it is 80 lb. For the 300 lb crate, it is 75 lb. For the 450 lb crate, it is 70 lb. Arranging these from greatest to least yields the sequence of 90 lb, 80 lb, 75 lb, and 70 lb.

Adım Adım Çözüm

1

Calculate the Ideal Mechanical Advantage (IMA) for each ramp.

Item 1: 5. Item 2: 2. Item 3: 10. Item 4: 4.

IMA is determined by the ratio of the ramp's length to its vertical height (

IMA = \frac{L}{h}

).

2

Determine the ideal effort force required to move each load without friction.

Item 1: 60 lb. Item 2: 80 lb. Item 3: 45 lb. Item 4: 60 lb.

The ideal effort force is the weight of the load divided by the IMA (

F_{\text{ideal}} = \frac{W}{IMA}

).

3

Add the constant friction force to the ideal effort force to find the total required effort.

Item 1: 75 lb. Item 2: 80 lb. Item 3: 70 lb. Item 4: 90 lb.

Friction acts against the movement up the ramp, so it must be added to the ideal effort force to find the true required effort.

4

Arrange the final total effort values in descending order.

90 lb, 80 lb, 75 lb, 70 lb.

The question asks for the order from greatest required effort force to least.

Anahtar Kavram

Calculating total required effort force on an inclined plane by combining Ideal Mechanical Advantage (IMA) and frictional forces.

Soru 7Soru →

A construction team uses various temporary ramps to roll heavy equipment platforms to different elevated levels. Assuming friction is negligible, arrange the following ramp configurations in order from the LEAST effort force required to the GREATEST effort force required.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order from least effort force to greatest effort force is: the 25 ft ramp, followed by the 20 ft ramp, then the 18 ft ramp, and finally the 14 ft ramp.

The effort force required to move an object up a frictionless inclined plane is determined by the ratio of the height to the length of the plane. A lower height-to-length ratio means a higher mechanical advantage and less required effort force. By calculating this ratio for each ramp, we find the 25 ft ramp requires

\frac{1}{5}

(20%) of the load's weight, the 20 ft ramp requires

\frac{1}{4}

(25%), the 18 ft ramp requires

\frac{1}{3}

(33.3%), and the 14 ft ramp requires

\frac{1}{2}

(50%). Therefore, the sequence is 25 ft ramp, 20 ft ramp, 18 ft ramp, and 14 ft ramp.

Adım Adım Çözüm

1

Identify the relationship between effort force, load, ramp length, and height.

\text{Effort Force} = \text{Load} \times \left(\frac{\text{height}}{\text{length}}\right)

.

The effort force is inversely proportional to the ideal mechanical advantage (

\text{IMA} = \frac{\text{length}}{\text{height}}

).

2

Calculate the effort force fraction for each ramp configuration.

25 ft ramp:

\frac{5}{25} = \frac{1}{5}

; 20 ft ramp:

\frac{5}{20} = \frac{1}{4}

; 18 ft ramp:

\frac{6}{18} = \frac{1}{3}

; 14 ft ramp:

\frac{7}{14} = \frac{1}{2}

.

Comparing these fractions allows us to determine the relative force required for an identical load.

3

Order the calculated fractions from lowest to highest.

\frac{1}{5} < \frac{1}{4} < \frac{1}{3} < \frac{1}{2}

.

The prompt asks to arrange the setups from the least effort force to the greatest effort force.

Anahtar Kavram

Ideal Mechanical Advantage and Effort Force on an Inclined Plane

Soru 8Soru →

Rank the following inclined plane configurations in order from the LEAST effort force required to the GREATEST effort force required. Assume ideal conditions with no friction.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from least to greatest effort force is: the 500 lb load on a 15 ft ramp (100 lbs), followed by the 600 lb load on a 12 ft ramp (150 lbs), then the 400 lb load on an 8 ft ramp (200 lbs), and finally the 750 lb load on a 15 ft ramp (250 lbs).

The effort force required for an inclined plane is calculated by dividing the weight of the load by the Ideal Mechanical Advantage (IMA = Length / Height). Calculating this for each scenario yields: 100 lbs, 150 lbs, 200 lbs, and 250 lbs respectively. Organizing these from least to greatest provides the correct sequence.

Adım Adım Çözüm

1

Calculate the effort force for the

750\text{ lb}

cargo.

Force =

750 \times (5 / 15) = 750 \times (1 / 3) = 250\text{ lbs}

.

To determine the actual force needed, divide the load by the Ideal Mechanical Advantage (IMA = Length / Height).

2

Calculate the effort force for the

400\text{ lb}

cargo.

Force =

400 \times (4 / 8) = 400 \times 0.5 = 200\text{ lbs}

.

The ramp's IMA is 2, meaning it halves the required lifting force.

3

Calculate the effort force for the

600\text{ lb}

cargo.

Force =

600 \times (3 / 12) = 600 \times 0.25 = 150\text{ lbs}

.

The ramp has an IMA of 4, which divides the

600\text{ lb}

load by 4.

4

Calculate the effort force for the

500\text{ lb}

cargo.

Force =

500 \times (3 / 15) = 500 \times 0.2 = 100\text{ lbs}

.

This configuration provides an IMA of 5, which significantly reduces the force.

5

Order the calculated effort forces from least to greatest.

The correct order is

100\text{ lbs}

,

150\text{ lbs}

,

200\text{ lbs}

,

250\text{ lbs}

.

The question specifically requests the sequence from least effort to greatest effort.

Anahtar Kavram

Ideal Mechanical Advantage and Effort Force in Inclined Planes

Tahmini Süre:2m 0s

Soru 9Soru →

A civil engineer is designing a road to reach the summit of a steep mountain. Instead of building a road that goes straight up the slope, the engineer designs a series of gradual switchbacks (zigzags). Ignoring friction and air resistance, how does the switchback design affect the physical task for a vehicle climbing the mountain compared to a direct, steep route?

The design reduces the total amount of work the vehicle must perform because the slope is not as steep.

The design reduces the actual weight of the vehicle against gravity, which reduces the required engine force.

The design requires less force from the vehicle's engine, but the total amount of work done to reach the summit is unchanged.

The design requires less force from the vehicle's engine, which directly decreases the total amount of work performed.

Cevabı ve açıklamayı göster

Cevap: The design requires less force from the vehicle's engine, but the total amount of work done to reach the summit is unchanged.

Cevap

The design requires less force from the vehicle's engine, but the total amount of work done to reach the summit is unchanged.

A switchback acts as an inclined plane. By making the path longer and more gradual, the mechanical advantage increases. This means the vehicle's engine does not have to provide as much force at any given moment to push the vehicle upward. However, because this smaller force must be applied over a much longer distance, the total amount of work done against gravity (Force × Distance) remains exactly the same as taking a shorter, steeper route.

Adım Adım Çözüm

1

Identify the simple machine principle at work.

A switchback road acts as an inclined plane, stretching the vertical climb over a much longer physical distance.

To determine which mechanical principles govern the vehicle's climb.

2

Analyze how the inclined plane affects the required force.

Because the slope is more gradual, the mechanical advantage increases, meaning the engine has to provide less effort force to push the vehicle upward at any given moment.

To understand the immediate benefit of using a ramp or switchback.

3

Apply the principle of conservation of work.

Work is equal to Force multiplied by Distance. The switchback decreases the force but increases the distance by the exact same proportion, meaning the total work done to lift the vehicle to the summit remains exactly the same.

To complete the comparison between the switchback and the direct route.

Anahtar Kavram

Ideal Mechanical Advantage and Work on an Inclined Plane

Soru 10Soru →

A heavy transport truck with a mass of $10\text{ metric tons}$ ( $1\text{ metric ton} = 1000\text{ kg}$ ) needs to deliver supplies to a mountain facility located $500\text{ m}$ vertically above its current position. A direct, steep road up the mountainside to the facility is $1000\text{ m}$ long. Instead, the truck takes a winding switchback road that is $4000\text{ m}$ long to reach the exact same facility. Assuming an ideal system with no friction and using $g = 10\text{ m/s}^2$ , what is the required effort force on the switchback road, and how does the total work done compare to using the direct road?

The effort force is

12.5\text{ N}

, and the total work done is the same as the direct road.

The effort force is

12,500\text{ N}

, and the total work done is one-fourth of the work required on the direct road.

The effort force is

12,500\text{ N}

, and the total work done is the same as the direct road.

The effort force is

1,250\text{ N}

, and the total work done is the same as the direct road.

Cevabı ve açıklamayı göster

Cevap: The effort force is $12,500\text{ N}$ , and the total work done is the same as the direct road.

Cevap

The effort force is

12,500\text{ N}

, and the total work done is the same as the direct road.

The correct answer accurately calculates the truck's weight (

100,000\text{ N}

), finds the ideal mechanical advantage of the switchback road (

4000\text{ m} / 500\text{ m} = 8

), and divides the weight by the IMA to find the effort force (

12,500\text{ N}

). It also correctly identifies that in an ideal system, the total work done depends only on the vertical height and load, remaining constant regardless of the path taken.

Adım Adım Çözüm

1

Calculate the total weight (load force) of the truck.

Weight =

10,000\text{ kg} \times 10\text{ m/s}^2 = 100,000\text{ N}

.

The mass must be converted to standard SI units (kilograms) and multiplied by gravity to find the downward force required to lift it.

2

Calculate the Ideal Mechanical Advantage (IMA) of the switchback road.

\text{IMA} = \frac{\text{Length}}{\text{Height}} = \frac{4000\text{ m}}{500\text{ m}} = 8

.

The mechanical advantage of an inclined plane is the ratio of its slope length to its vertical height.

3

Calculate the required effort force on the switchback road.

\text{Effort Force} = \frac{\text{Load}}{\text{IMA}} = \frac{100,000\text{ N}}{8} = 12,500\text{ N}

.

In an ideal system, the required effort force is equal to the load divided by the mechanical advantage.

4

Compare the total work done between the two paths.

The total work remains the same for both the direct road and the switchback road.

According to the conservation of energy, an inclined plane reduces the effort force by increasing the distance traveled, but the total work done (Force

\times

Distance) remains constant in an ideal system.

Anahtar Kavram

Ideal Mechanical Advantage of Inclined Planes and Conservation of Work

Soru 11Soru →

A mechanic needs to move a $150\text{ kg}$ engine block onto a storage shelf that is $120\text{ cm}$ above the floor. He uses a frictionless inclined plane and applies a constant effort force of $300\text{ N}$ parallel to the ramp's surface to push the block at a constant speed. Assuming the acceleration due to gravity is $10\text{ m/s}^2$ , what is the required length of the inclined plane, and how does the total work done using the ramp compare to the work required to lift the engine vertically?

6.0\text{ m}

; total work done is equal to lifting it vertically

6.0\text{ m}

; total work done is less than lifting it vertically

0.6\text{ m}

; total work done is less than lifting it vertically

600\text{ m}

; total work done is equal to lifting it vertically

Cevabı ve açıklamayı göster

Cevap: $6.0\text{ m}$ ; total work done is equal to lifting it vertically

Cevap

The required length is

6.0\text{ m}

, and the total work done is equal to the work required to lift the engine vertically.

The weight of the engine block is

1500\text{ N}

. To lift it

1.2\text{ m}

vertically requires

1800\text{ J}

of work. Using a frictionless ramp, the exact same

1800\text{ J}

of work is performed by applying a smaller

300\text{ N}

force over a longer distance (

6.0\text{ m}

). Simple machines change the ratio of force and distance but do not alter the total work done.

Adım Adım Çözüm

1

Calculate the weight of the engine block and convert the height to meters.

Weight =

150\text{ kg} \times 10\text{ m/s}^2 = 1500\text{ N}

. Height =

1.2\text{ m}

.

Standard SI units (meters) and forces (Newtons) are required for accurate work and energy calculations.

2

Apply the principle of conservation of work (Work Input = Work Output) to solve for the length.

300\text{ N} \times L = 1500\text{ N} \times 1.2\text{ m} \rightarrow 300L = 1800 \rightarrow L = 6.0\text{ m}

.

In a frictionless system, the input work done by the effort force over the ramp's length equals the output work needed to lift the object vertically.

3

Compare the total work done in both scenarios.

Work on ramp (

300\text{ N} \times 6.0\text{ m} = 1800\text{ J}

) equals Work lifted vertically (

1500\text{ N} \times 1.2\text{ m} = 1800\text{ J}

).

Simple machines like inclined planes provide a mechanical advantage by spreading the same amount of work over a longer distance, reducing the required force.

Anahtar Kavram

Ideal Mechanical Advantage and Work Conservation on an Inclined Plane

Soru 12Soru →

A delivery crew needs to load a $600\text{ lb}$ safe into the back of a moving truck that sits $4\text{ ft}$ above the ground. They deploy a straight, uniform ramp that is $16\text{ ft}$ long. Assuming friction is negligible, what is the ideal effort force, in pounds, required to push the safe up the ramp?

Cevabı ve açıklamayı göster

Cevap: 150

Cevap

150

By using a ramp, the distance over which the force is applied increases, which proportionally decreases the required force. A 16-foot ramp lifting an object 4 feet provides a mechanical advantage of 4 (16 divided by 4). Therefore, pushing a 600-pound load requires only one-quarter of the weight in force, which is 150 pounds.

Adım Adım Çözüm

1

Calculate the Ideal Mechanical Advantage (IMA) of the ramp.

IMA = 16 / 4 = 4

The mechanical advantage of an inclined plane is the ratio of its length to its vertical height.

2

Calculate the ideal effort force required to move the load.

Effort Force = 600 / 4 = 150 lbs

The required effort force is the total load divided by the mechanical advantage.

Anahtar Kavram

Ideal Mechanical Advantage of an Inclined Plane

Soru 13Soru →

A logistics team needs to roll a heavy generator weighing $900\text{ lbs}$ from the ground onto a raised platform that is $5\text{ feet}$ high. If the team can apply a maximum combined push force of $150\text{ lbs}$ parallel to the ramp surface, what is the minimum ramp length required to accomplish this task? Assume ideal conditions with zero friction.

Cevabı ve açıklamayı göster

Cevap: 30

Cevap

The minimum ramp length required is

30\text{ feet}

.

In an ideal frictionless system, the ratio of the load force to the effort force equals the ratio of the ramp length to its height. A load of

900\text{ lbs}

requiring only

150\text{ lbs}

of effort means the system needs a mechanical advantage of

6

. Since the height is

5\text{ feet}

, the ramp must be

6

times longer than the height, which is

30\text{ feet}

.

Adım Adım Çözüm

1

Calculate the required Ideal Mechanical Advantage (IMA).

IMA = \frac{\text{Load}}{\text{Effort}} = \frac{900\text{ lbs}}{150\text{ lbs}} = 6

The mechanical advantage indicates how many times the machine multiplies the effort force. We need a mechanical advantage of 6 to move the

900\text{ lbs}

load with only

150\text{ lbs}

of force.

2

Calculate the required ramp length using the IMA and the given height.

IMA = \frac{\text{Length}}{\text{Height}} \Rightarrow 6 = \frac{\text{Length}}{5\text{ feet}} \Rightarrow \text{Length} = 6 \times 5 = 30\text{ feet}

For an inclined plane in ideal conditions, the mechanical advantage is also the ratio of the ramp's length to its vertical height.

Anahtar Kavram

The relationship between effort force, load, ramp length, and vertical height on an ideal inclined plane (Ideal Mechanical Advantage).

Tahmini Süre:1m 30s

Soru 14Soru →

A motorized winch is pulling a $1,500\text{ lb}$ boat and trailer assembly up a concrete boat ramp at a constant speed. The ramp has a total length of $40\text{ ft}$ and a vertical drop of $8\text{ ft}$ from the parking lot to the water level. If the mechanical efficiency of the ramp system is $80\%$ (due to friction in the wheel bearings and surface resistance), what is the actual effort force, in pounds, the winch must apply to pull the assembly up the ramp?

Cevabı ve açıklamayı göster

Cevap: 375

Cevap

The winch must apply an actual effort force of 375 pounds.

To solve this problem, you must integrate the concepts of Ideal Mechanical Advantage (IMA) and mechanical efficiency. First, find the IMA by dividing the ramp's length by its vertical drop (

40 / 8 = 5

). In an ideal, frictionless system, the effort force required would be the load divided by the IMA (

1500 / 5 = 300\text{ lb}

). However, the problem states the system is only

80\%

efficient due to friction. Efficiency is the ratio of ideal effort to actual effort. To find the actual effort force, divide the ideal effort by the efficiency (

300 / 0.80 = 375\text{ lb}

).

Adım Adım Çözüm

1

Calculate the Ideal Mechanical Advantage (IMA).

\text{IMA} = 5

The IMA of an inclined plane is found by dividing the length of the slope by the vertical height (

40 / 8 = 5

).

2

Calculate the theoretical effort force required under ideal, frictionless conditions.

\text{Theoretical Effort} = 300\text{ lb}

Theoretical effort force is the load divided by the IMA (

1500 / 5 = 300\text{ lb}

).

3

Calculate the actual effort force by accounting for the mechanical efficiency.

\text{Actual Effort} = 375\text{ lb}

Because the system is only

80\%

efficient, it requires more force than the ideal scenario. Divide the theoretical effort by the efficiency as a decimal (

300 / 0.80 = 375\text{ lb}

).

Anahtar Kavram

Actual Mechanical Advantage and Efficiency of Inclined Planes

Soru 15Soru →

A worker needs to push a supply cart weighing $150\text{ lbs}$ up to a loading dock. The dock is $3\text{ feet}$ above the ground, and the straight ramp leading up to it is $30\text{ feet}$ long. Assuming friction is negligible, what is the effort force required to push the cart up the ramp?

150\text{ lbs}

450\text{ lbs}

15\text{ lbs}

1,500\text{ lbs}

Cevabı ve açıklamayı göster

Cevap: $15\text{ lbs}$

Cevap

The correct effort force required is

15\text{ lbs}

.

The effort force is found by dividing the total load by the Ideal Mechanical Advantage (IMA). The IMA of an inclined plane is the ratio of its length to its vertical height (

30\text{ feet} / 3\text{ feet} = 10

). Therefore, the required effort force is the load divided by the IMA:

150\text{ lbs} / 10 = 15\text{ lbs}

.

Adım Adım Çözüm

1

Identify the known variables from the problem.

Load =

150\text{ lbs}

, Ramp Length =

30\text{ feet}

, Height =

3\text{ feet}

.

These values are required to calculate the mechanical advantage and the resulting effort force.

2

Calculate the Ideal Mechanical Advantage (IMA) of the ramp.

\text{IMA} = \frac{\text{Length}}{\text{Height}} = \frac{30}{3} = 10

The IMA tells us by what factor the machine multiplies the input force (or divides the required effort).

3

Calculate the required effort force.

\text{Effort Force} = \frac{\text{Load}}{\text{IMA}} = \frac{150}{10} = 15\text{ lbs}

Dividing the total weight of the object by the mechanical advantage gives the theoretical force needed to move it up the incline.

Anahtar Kavram

Ideal Mechanical Advantage (IMA) and Effort Force on an Inclined Plane

Tahmini Süre:45s

Soru 16Soru →

A flight line technician must load a cargo pallet with a mass of $240\text{ kg}$ into a transport aircraft. The aircraft's cargo deck is $1.5\text{ meters}$ above the tarmac. To assist with loading, the technician deploys a straight, $6.0\text{-meter}$ long rigid ramp equipped with frictionless rollers. Assuming the acceleration due to gravity is $10\text{ m/s}^2$ , which of the following identifies the ideal effort force required to push the pallet up the ramp, and correctly compares the total work performed to lifting the pallet vertically?

600\text{ N}

; the total work performed is the same as lifting the pallet vertically.

600\text{ N}

; the total work performed is less than lifting the pallet vertically.

60\text{ N}

; the total work performed is the same as lifting the pallet vertically.

60\text{ N}

; the total work performed is less than lifting the pallet vertically.

Cevabı ve açıklamayı göster

Cevap: $600\text{ N}$ ; the total work performed is the same as lifting the pallet vertically.

Cevap

The effort force is

600\text{ N}

, and the total work performed is exactly the same as lifting the pallet vertically.

The correct answer accurately calculates both the required force and applies the principle of work conservation. First, weight is determined by multiplying mass by gravity (

240\text{ kg} \times 10\text{ m/s}^2 = 2400\text{ N}

). The ideal mechanical advantage (IMA) of the ramp is its length divided by its height (

6.0\text{ m} / 1.5\text{ m} = 4

). The effort force is the weight divided by the IMA (

2400\text{ N} / 4 = 600\text{ N}

). Finally, while the ramp reduces the effort force, it requires moving the object over a longer distance, meaning the total work performed (

600\text{ N} \times 6.0\text{ m} = 3600\text{ Joules}

) is identical to lifting it straight up (

2400\text{ N} \times 1.5\text{ m} = 3600\text{ Joules}

).

Adım Adım Çözüm

1

Calculate the weight (load force) of the cargo pallet.

W = 240\text{ kg} \times 10\text{ m/s}^2 = 2400\text{ N}

Mass must be converted to weight (force) before mechanical advantage formulas can be properly applied.

2

Determine the Ideal Mechanical Advantage (IMA) of the inclined plane.

\text{IMA} = \frac{6.0\text{ m}}{1.5\text{ m}} = 4

IMA for an inclined plane is the ratio of the effort distance (ramp length) to the load distance (vertical height).

3

Calculate the ideal effort force.

\text{Effort Force} = \frac{2400\text{ N}}{4} = 600\text{ N}

The effort force is equal to the total load force divided by the mechanical advantage of the machine.

4

Evaluate the total work performed in both scenarios.

Work via ramp:

600\text{ N} \times 6.0\text{ m} = 3600\text{ J}

. Work vertical:

2400\text{ N} \times 1.5\text{ m} = 3600\text{ J}

. Work is equal.

According to the principle of conservation of energy, simple machines trade increased distance for reduced effort force, leaving the total work unchanged.

Anahtar Kavram

Mechanical advantage reduces effort force by increasing distance, but total work is conserved.

Soru 17Soru →

A construction worker needs to push a heavy wheelbarrow up to a raised foundation that is $2\text{ m}$ above the ground. The worker has three different sturdy wooden planks available to use as a ramp. Arrange the following planks in order from the LEAST amount of effort force required to the MOST amount of effort force required.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The planks should be ordered from longest (

10\text{ m}

) to shortest (

4\text{ m}

). The

10\text{ m}

plank requires the least effort, the

8\text{ m}

plank requires a moderate amount, and the

4\text{ m}

plank requires the most effort.

The effort force needed to move an object up a ramp is inversely proportional to the ramp's length when the vertical height is fixed. The

10\text{ m}

plank provides the most gradual slope (highest mechanical advantage) and therefore requires the least effort force. As the plank length decreases to

8\text{ m}

and then

4\text{ m}

, the slope becomes steeper, reducing the mechanical advantage and requiring increasingly more effort force. Thus, ordering from least to most effort force is synonymous with ordering from longest to shortest plank.

Adım Adım Çözüm

1

Recall the formula for the Ideal Mechanical Advantage (IMA) of an inclined plane.

\text{IMA} = \frac{\text{Length of the slope}}{\text{Height of the incline}}

This formula helps us determine how much a ramp multiplies the input force.

2

Determine the relationship between length, IMA, and effort force.

Since the height (

2\text{ m}

) is constant for all three planks, a longer plank results in a higher IMA. A higher IMA means less effort force is required to push the load.

Understanding this inverse relationship allows us to rank the effort force without doing complex calculations.

3

Rank the planks based on length to determine the required effort force.

Longest plank (

10\text{ m}

) = Highest IMA = Least effort force. Shortest plank (

4\text{ m}

) = Lowest IMA = Most effort force.

The question asks to order from LEAST effort force to MOST effort force, which corresponds to ordering from longest ramp to shortest ramp.

Anahtar Kavram

For an inclined plane of a given height, increasing the length of the plane increases its mechanical advantage, which proportionally decreases the effort force required to move a load up the plane.

Tahmini Süre:45s

Soru 18Soru →

Arrange the following material handling tasks in order from the LEAST amount of effort force required to the GREATEST amount of effort force required. (Assume frictionless ramps)

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from least to greatest effort force is: Task A (

30\text{ lbs}

), Task D (

40\text{ lbs}

), Task C (

50\text{ lbs}

), Task B (

60\text{ lbs}

).

Task A requires

30\text{ lbs}

of force, Task D requires

40\text{ lbs}

, Task C requires

50\text{ lbs}

, and Task B requires

60\text{ lbs}

. Ordering these mathematically from lowest to highest yields Task A, Task D, Task C, and Task B.

Adım Adım Çözüm

1

Calculate the Ideal Mechanical Advantage (IMA) for each ramp.

Task A:

12/3 = 4

. Task B:

6/2 = 3

. Task C:

8/4 = 2

. Task D:

5/1 = 5

.

The IMA determines how much the ramp multiplies the applied force, calculated as the length of the ramp divided by its height.

2

Calculate the required effort force for each task.

Task A:

120/4 = 30\text{ lbs}

. Task B:

180/3 = 60\text{ lbs}

. Task C:

100/2 = 50\text{ lbs}

. Task D:

200/5 = 40\text{ lbs}

.

Effort force equals the load's total weight divided by the IMA of the ramp.

3

Order the tasks from least effort to greatest effort.

Task A (

30\text{ lbs}

) < Task D (

40\text{ lbs}

) < Task C (

50\text{ lbs}

) < Task B (

60\text{ lbs}

).

The question specifically asks for the sequence starting with the lowest force and ending with the highest.

Anahtar Kavram

Ideal Mechanical Advantage and Effort Force on an Inclined Plane

Soru 19Soru →

A homeowner needs to move a $300\text{ lb}$ refrigerator onto a porch that is $2\text{ feet}$ above ground level. They place a straight, frictionless wooden ramp that is $6\text{ feet}$ long from the ground to the porch edge. How much effort force is required to push the refrigerator up the ramp?

150\text{ lbs}

300\text{ lbs}

100\text{ lbs}

900\text{ lbs}

Cevabı ve açıklamayı göster

Cevap: $100\text{ lbs}$

Cevap

100\text{ lbs}

To find the force required to push an object up a frictionless ramp, first find the ramp's Ideal Mechanical Advantage (IMA). The IMA is the ramp's length divided by its vertical height (

6\text{ ft} / 2\text{ ft} = 3

). The effort force needed is the object's weight divided by this mechanical advantage (

300\text{ lbs} / 3 = 100\text{ lbs}

).

Adım Adım Çözüm

1

Calculate the Ideal Mechanical Advantage (IMA) of the ramp.

\text{IMA} = \frac{\text{Length}}{\text{Height}} = \frac{6\text{ ft}}{2\text{ ft}} = 3

The IMA tells us how many times easier the ramp makes the task compared to lifting the object straight up.

2

Calculate the required effort force.

\text{Effort Force} = \frac{\text{Weight}}{\text{IMA}} = \frac{300\text{ lbs}}{3} = 100\text{ lbs}

An inclined plane reduces the necessary force by a factor equal to its mechanical advantage.

Anahtar Kavram

Ideal Mechanical Advantage and Effort Force of an Inclined Plane

Tahmini Süre:1m 0s

Soru 20Soru →

A logistics team can use either a $12\text{-foot}$ ramp or a $24\text{-foot}$ ramp to slide heavy crates onto a loading platform that is $4\text{ feet}$ above the ground. Assuming friction is negligible, which of the following statements is true regarding the use of the $24\text{-foot}$ ramp compared to the $12\text{-foot}$ ramp?

The required effort force is halved, but the crate must be pushed twice as far, resulting in the same amount of total work.

The required effort force is halved, and the total work done to move the crate is also reduced by half.

The greater surface area of the

24\text{-foot}

ramp decreases the friction applied to the crate, which reduces the total work required.

Since the crate's mass is supported over a longer distance, its overall weight decreases, making it easier to lift.

Cevabı ve açıklamayı göster

Cevap: The required effort force is halved, but the crate must be pushed twice as far, resulting in the same amount of total work.

Cevap

The longer ramp reduces the effort force by half because it is twice as long, but because the pushing distance is doubled, the total work remains exactly the same.

An inclined plane trades distance for reduced force. Doubling the ramp's length doubles the mechanical advantage, thus halving the effort force required. However, because the force must be applied over twice the distance to reach the same vertical height, the total work (Force × Distance) remains exactly the same, obeying the law of conservation of energy.

Adım Adım Çözüm

1

Calculate the ideal mechanical advantage (IMA) of both ramps.

The

12\text{-foot}

ramp has an IMA of

3

(

12/4

), and the

24\text{-foot}

ramp has an IMA of

6

(

24/4

).

IMA is found by dividing the slope length by the vertical height. It determines the factor by which effort force is reduced.

2

Compare the effort forces required for each ramp.

Because the

24\text{-foot}

ramp has twice the IMA of the

12\text{-foot}

ramp (

6

vs

3

), it requires exactly half the effort force to push the same crate.

Effort force is inversely proportional to mechanical advantage.

3

Analyze the total work done in both scenarios.

Work equals force multiplied by distance (

W = F \times d

). Applying half the force over twice the distance yields identical total work.

Simple machines do not change the total amount of work required; they only trade increased distance for decreased force.

Anahtar Kavram

Conservation of work and ideal mechanical advantage (IMA) on an inclined plane.

Tahmini Süre:1m 0s

Inclined Planes

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram