Tüm alıştırma soruları

3551 soru

Soru 2941Soru

A technician is preparing to service a corporate laptop that exhibits physical chassis deformation due to a swollen internal lithium-ion battery. Place the following service procedures in the correct sequential order from first step to last step to ensure safety and system integrity.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The proper sequence begins with disconnecting external AC power and draining residual system power, followed by removing the chassis cover and disconnecting the internal battery cable. Next, the hazardous swollen battery is unfastened and isolated into a fire-safe storage container. The replacement battery is then mounted and the chassis is closed. Finally, the AC adapter is attached to verify charging functionality.
The correct procedural order ensures technician safety and prevents hardware damage. First, external AC power must be disconnected and residual power drained. Next, the chassis is opened and the battery header disconnected to cut internal DC power. The damaged battery can then be safely unfastened and placed into a fire-resistant container. After securing the new battery and closing the chassis, AC power is reconnected to test power delivery and charge LED indication.

Adım Adım Çözüm

1
Disconnect external AC adapter and hold the power button for 15 seconds.
System residual flea power is completely discharged.
Prevents electrical discharge or component damage when opening the chassis.
2
Remove bottom panel and disconnect battery connector from the system board.
DC power pathway to motherboard traces is cut.
Ensures no active power flows while working near internal circuitry.
3
Unfasten swollen battery and place into a fire-safe hazardous material container.
The physical hazard is safely removed and stored.
Swollen lithium-ion batteries present thermal runaway risks and must be isolated immediately.
4
Mount replacement battery, reattach system board cable, and close chassis.
Hardware installation is completed and sealed.
Secures internal connections before external power is introduced.
5
Connect official AC power adapter and inspect charge LEDs.
Power delivery negotiation and battery charge cycle are confirmed operational.
Validates the power subsystem functions under normal AC/DC conditions.

Anahtar Kavram

Safety procedures and sequential isolation for servicing laptop battery and power subsystems.
Tahmini Süre:2m 0s
Soru 2942Soru

A network technician is performing a security audit and service verification across an enterprise network infrastructure. Match each network host service or server role on the left with its corresponding default network port, protocol, or primary administrative function on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

DHCP Server
DNS Server
Syslog Server
Web Proxy Server

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

The DHCP Server dynamically assigns client IP addresses and network configurations using UDP ports 67/68. The DNS Server resolves fully qualified domain names to IP addresses over port 53. The Syslog Server aggregates centralized event log messages over UDP port 514. The Web Proxy Server intercepts client outbound HTTP/HTTPS requests for content filtering and caching.
Each service is matched to its definitive server function and standard network port: DHCP handles client network configuration over UDP ports 67/68; DNS resolves names to IP addresses over port 53; Syslog collects centralized status logs over UDP 514; and Web Proxy servers handle web request interception and content filtering.

Adım Adım Çözüm

1
Identify the host role responsible for dynamic IP addressing
Associate the DHCP Server with automated IP scope assignment using UDP ports 67 (server) and 68 (client).
DHCP automates network configuration and prevents manual static addressing errors across workstations.
2
Identify the service providing hostname-to-IP resolution
Associate the DNS Server with name resolution operating on port 53 over UDP/TCP.
DNS maps user-friendly web and host names to network-routable IP addresses.
3
Determine the service responsible for centralized event log aggregation
Associate Syslog with logging data consolidation over UDP port 514.
Syslog provides a standardized message transport mechanism to collect system status notifications centrally.
4
Identify the intermediary service inspecting web traffic
Associate the Web Proxy Server with intercepting client web requests for policy enforcement and caching.
Proxies act as security gateways and traffic managers for outbound HTTP/HTTPS web sessions.

Anahtar Kavram

Network Host Services and Server Roles
Soru 2943Soru

A network infrastructure team is deploying physical hardware components across an enterprise campus expansion. The architecture requires specialized hardware to handle incoming fiber demarcation, centralized wireless management, application server traffic distribution, and power delivery over copper runs without upgrading legacy switches. Match each network hardware device to its primary operational function and deployment scenario.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Optical Network Terminal (ONT)
Wireless LAN Controller (WLC)
Load Balancer
PoE Injector

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Optical Network Terminal (ONT) matches with converting optical light signals into electrical Ethernet signals at the demarcation point. Wireless LAN Controller (WLC) matches with centralizing configuration and RF management across lightweight access points. Load Balancer matches with monitoring backend server health and distributing incoming client traffic across multiple server nodes. PoE Injector matches with adding electrical power into an Ethernet cable run when the upstream switch does not support Power over Ethernet.
The correct pairings align each hardware device with its exact physical or logical function: the ONT performs optical-to-electrical signal conversion at the demarcation point, the WLC manages lightweight access points centrally, the Load Balancer optimizes traffic distribution across application server clusters based on health probes, and the PoE Injector introduces power onto a copper cabling run to supply remote powered devices when using non-PoE switches.

Adım Adım Çözüm

1
Analyze the fiber-optic Internet Service Provider demarcation requirement.
Identify that converting fiber-optic light pulses into electrical copper Ethernet signals requires an Optical Network Terminal (ONT).
FTTP installations require an ONT to interface between the optical distribution network and the local Ethernet network.
2
Analyze the centralized wireless infrastructure management requirement.
Identify that managing lightweight access points centrally for RF tuning, security, and SSIDs requires a Wireless LAN Controller (WLC).
Autonomous access points are managed individually, whereas lightweight access points require a centralized controller for unified control plane operations.
3
Analyze the application traffic distribution and server redundancy requirement.
Identify that distributing incoming requests based on health checks to prevent server overload requires a Load Balancer.
Load balancers perform health probes and run algorithms like round-robin or least-connections to divide client workloads across web or application server farms.
4
Analyze the legacy non-PoE switch power addition requirement.
Identify that injecting DC power into copper network lines without replacing legacy infrastructure requires a PoE Injector.
A PoE injector acts as a midspan power device, combining data from a non-PoE switch port with DC power to output a single PoE-compliant cable run.

Anahtar Kavram

Identifying specialized network hardware roles, deployment boundaries, and operational functions in enterprise and SOHO network architectures.
Soru 2944Soru

A systems technician is preparing to upgrade the memory and internal storage on a fleet of high-performance business laptops. Which of the following hardware specifications and installation practices must the technician verify to ensure compatibility and prevent hardware failure? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Verify that replacement memory modules use the SO-DIMM form factor rather than standard desktop DIMM modules.; Confirm that an M.2 expansion slot designated specifically for SATA drives is fitted with an M.2 SATA SSD rather than an unsupported M.2 NVMe PCIe drive.

Cevap

The technician must verify that replacement RAM uses the SO-DIMM form factor and confirm that M.2 SATA storage drives are matched to slots supporting the SATA protocol interface.
Laptop hardware upgrades require confirming small outline form factors (SO-DIMM) for RAM due to physical dimension limitations. For storage, technicians must verify whether an M.2 slot supports SATA or PCIe/NVMe protocols to prevent drive detection failures.

Adım Adım Çözüm

1
Identify memory module form factor requirements for portable computers.
Laptop motherboards require SO-DIMM modules due to small enclosure footprints.
Desktop DIMMs are physically larger and incompatible with laptop slots.
2
Verify M.2 storage bus protocol compatibility.
M.2 slots can be wired for SATA or PCIe/NVMe protocols.
Installing an NVMe PCIe drive into a SATA-only M.2 slot results in detection failure due to protocol mismatch.

Anahtar Kavram

Laptop memory form factor (SO-DIMM) and M.2 SSD interface compatibility (SATA vs. NVMe)
Soru 2945Soru

A technician is preparing to replace an internal M.2 solid-state drive inside a corporate laptop. After powering off the device and removing the chassis enclosure, which of the following actions should the technician perform first to prevent electrical damage to internal components?

Cevabı ve açıklamayı göster

Cevap: Disconnect the internal battery cable from the motherboard.

Cevap

Disconnect the internal battery cable from the motherboard.
Disconnecting the internal battery cable immediately isolates the system board from all power sources. Even when turned off, laptop motherboards maintain active standby power circuits that can short-circuit and damage delicate surface-mount components if touched by tools or hardware during repair.

Adım Adım Çözüm

1
Identify the primary power isolation procedure required during laptop disassembly.
Recognize that modern laptops retain standby power from internal batteries even when powered down.
Internal electrical potential can cause short circuits if metal tools or components touch active circuit traces.
2
Select the correct component isolation action prior to handling internal storage drives.
Disconnecting the battery connection safely de-energizes the motherboard.
This guarantees an electrically safe environment for installing or removing internal laptop hardware.

Anahtar Kavram

Laptop Internal Hardware Maintenance and Electrical Isolation
Soru 2946Soru

An IT technician is configuring personally owned mobile devices (BYOD) for enterprise sales representatives who travel frequently. The organization requires continuous, real-time synchronization of email, calendar events, and contact lists across all user endpoints. Additionally, corporate security policy dictates that IT administrators must be able to remotely sanitize corporate data upon employee departure without erasing personal photos, personal applications, or private settings. Which TWO of the following configurations should the technician implement to meet these requirements?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Configure mobile email accounts using Exchange ActiveSync or IMAP protocols.; Deploy Mobile Application Management (MAM) containerization policies to isolate corporate software and data.

Cevap

The technician should configure mobile email accounts using Exchange ActiveSync or IMAP protocols and deploy Mobile Application Management (MAM) containerization policies to isolate corporate software and data.
Exchange ActiveSync (or IMAP) provides true multi-device bi-directional synchronization for mail, contacts, and calendar schedules. Paired with Mobile Application Management (MAM), IT administrators can restrict data flow to corporate containers and perform selective enterprise wipes without touching personal photos or user applications on BYOD hardware.

Adım Adım Çözüm

1
Analyze synchronization requirements for email, calendar, and contacts across multiple endpoints.
Identify that two-way server-client protocol synchronization (such as Exchange ActiveSync or IMAP) is necessary to keep changes synchronized across desktop and mobile devices.
Protocols like POP3 only download messages to one endpoint and cannot sync contacts or calendar entries.
2
Analyze security and remote wipe requirements for personally owned BYOD mobile devices.
Select Mobile Application Management (MAM) containerization rather than a full Mobile Device Management (MDM) device wipe.
MAM creates isolated enterprise data containers allowing targeted enterprise wipes while protecting personal user data.

Anahtar Kavram

Enterprise Mobile Synchronization Protocols and MAM Containerization Scope
Soru 2947Soru

A network technician is setting up basic infrastructure services on a local server for a new branch office. Which TWO of the following services directly enable client computers to automatically receive IP addresses and translate friendly hostnames into numerical IP addresses?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: DHCP (Dynamic Host Configuration Protocol); DNS (Domain Name System)

Cevap

DHCP (Dynamic Host Configuration Protocol) and DNS (Domain Name System)
DHCP automatically provisions IP addresses and configuration parameters to workstations, while DNS converts friendly hostnames into numerical IP addresses. Together, these core services ensure devices can automatically attach to the network and reach services using domain names.

Adım Adım Çözüm

1
Identify the host service that automates network IP assignment.
Dynamic Host Configuration Protocol (DHCP) automatically leases IP addresses and configuration parameters to client devices upon network connection.
Automatic IP address assignment is the primary server role performed by DHCP.
2
Identify the host service that translates hostnames to IP addresses.
Domain Name System (DNS) maps human-friendly hostnames to numerical IP addresses used for network routing.
Name-to-address resolution is the primary server role performed by DNS.

Anahtar Kavram

Network Host Services and Server Roles
Soru 2948Soru

A network technician is diagnosing workstation configuration and connectivity issues across different network segments. Match each observed host diagnostic symptom on the left with its underlying network configuration root cause on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

A workstation receives an IP address of 169.254.10.45 and can only communicate with hosts on the local link.
A host successfully pings 8.8.8.8 but fails to reach www.comptia.org using a web browser.
A client device can communicate with neighboring devices on 192.168.1.0/24 but cannot reach any external subnets.
A workstation displays an IP address of fe80::211:22ff:fe33:4455 and communicates locally without a DHCP server.

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Matching pairs: (1) 169.254.10.45 address matches unreachable DHCP server resulting in APIPA; (2) Ping 8.8.8.8 success with browser URL failure matches missing or misconfigured DNS server; (3) Local subnet communication success with remote subnet failure matches misconfigured default gateway; (4) fe80:: address matches IPv6 link-local auto-configuration.
Each diagnostic symptom maps precisely to IP protocol principles: APIPA (169.254.x.x) indicates DHCP timeout; domain-name-only failure isolates DNS misconfiguration; inability to leave the local subnet indicates a missing/invalid default gateway; and fe80:: prefixes represent standard self-configured IPv6 link-local addresses.

Adım Adım Çözüm

1
Diagnose APIPA behavior
Recognize 169.254.x.x as the IPv4 APIPA block self-assigned when DHCP discovery times out.
APIPA allows basic local communication when dynamic addressing fails.
2
Diagnose name resolution vs network layer routing
Identify that raw IP pings succeed while hostname lookups fail, pointing directly to DNS misconfiguration.
DNS is responsible for translating human-readable hostnames into IP addresses; IP routing works independently of DNS.
3
Diagnose inter-subnet routing requirements
Determine that local communication works via ARP but remote routing fails due to a missing or invalid default gateway.
The default gateway is the exit point for packets directed to destinations outside the local subnet mask.
4
Diagnose IPv6 link-local addressing
Identify fe80::/10 as the mandatory self-generated IPv6 unicast address scope for link-local traffic.
IPv6 nodes auto-generate link-local addresses independently without requiring stateful DHCP services.

Anahtar Kavram

IP Addressing, Default Gateways, DNS Resolution, APIPA, and IPv6 Link-Local auto-configuration
Tahmini Süre:3m 0s
Soru 2949Soru

A field technician is deploying a new high-speed fiber-to-the-premises (FTTP) internet connection for a commercial client. The Internet Service Provider (ISP) has terminated a single-mode fiber optic cable inside the facility's main telecommunications room. However, the client's internal network router only features copper 1000BASE-T RJ-45 Ethernet WAN ports. Which hardware device must be installed at the demarcation point to convert the optical signals into electrical Ethernet signals for the edge router?

Cevabı ve açıklamayı göster

Cevap: Optical Network Terminal (ONT)

Cevap

An Optical Network Terminal (ONT) is required at the demarcation point to convert incoming fiber optic signals from the ISP into copper RJ-45 Ethernet signals compatible with the router's WAN interface.
In fiber-to-the-premises (FTTP) telecommunication installations, an Optical Network Terminal (ONT) serves as the modem/demarcation device. It converts incoming light pulses from the ISP fiber cable into electrical signals delivered over a standard RJ-45 Ethernet connection to the customer's router.

Adım Adım Çözüm

1
Analyze the physical media requirements at the network boundary.
Identified a physical layer media mismatch between incoming fiber optic ISP cabling (light signals) and internal router WAN interface (copper 1000BASE-T RJ-45 electrical signals).
Direct connection is impossible without active physical media conversion.
2
Evaluate candidate hardware devices based on functional role at the ISP demarcation point.
An Optical Network Terminal (ONT) acts as the active transceiver demarcation device for fiber broadband deliveries, terminating fiber optic cable and providing RJ-45 Ethernet handoffs.
The ONT specifically translates modulated light pulses into standard electrical binary signals required by Ethernet networking gear.

Anahtar Kavram

Fiber-to-the-Premises Demarcation and Optical Network Terminal (ONT) Operations
Tahmini Süre:1m 30s
Soru 2950Soru

A field technician is servicing several enterprise laptops to upgrade internal hardware and service display and power components. During hardware inspection and pre-upgrade evaluation, which of the following statements correctly describe the hardware compatibility, design characteristics, and safety procedures required for these laptop servicing operations? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Laptop memory upgrades require Small Outline Dual In-line Memory Modules (SO-DIMMs) due to the restricted physical clearance of laptop expansion slots.; Both the external AC power adapter and the internal primary battery must be completely disconnected before accessing internal motherboard components.

Cevap

The correct statements are that laptop memory upgrades require SO-DIMM modules due to physical form factor constraints, and all power sources (both external AC power and internal batteries) must be completely disconnected before accessing internal motherboard components.
Laptop hardware upgrades require SO-DIMM form-factor modules because space constraints prevent the use of standard desktop DIMMs. Additionally, disconnecting both the AC adapter and internal battery before disassembling the unit ensures the system is completely depowered, eliminating the risk of electrical shorting or component damage during hardware installation.

Adım Adım Çözüm

1
Analyze RAM physical form factor requirements for laptops.
Laptops require SO-DIMM memory modules because standard desktop DIMM modules are physically too large to fit in laptop chassis.
Compact mobile hardware uses standardized SO-DIMM architecture.
2
Determine safety precautions prior to opening laptop chassis.
Disconnect both external power supplies and internal batteries.
Residual power on the motherboard can short sensitive components when replacing parts.
3
Evaluate display technology power mechanisms.
Recognize that OLED screens do not use high-voltage inverters.
OLED pixels produce their own light directly, eliminating the need for cold-cathode fluorescent lamp (CCFL) backlight inverters.

Anahtar Kavram

Laptop hardware form factor constraints, display backlight technologies, and technician safety protocols
Soru 2951Soru

A technician is configuring network connectivity for a remote branch office. The Internet Service Provider (ISP) delivers a fiber optic handoff terminating with an LC connector inside the equipment rack. However, the firewall installed in the rack only features standard RJ-45 copper Ethernet interfaces for its WAN connections. Which network hardware device should the technician install to connect the ISP fiber line to the firewall's WAN port?

Cevabı ve açıklamayı göster

Cevap: Media converter

Cevap

A media converter should be installed to bridge the physical media gap between the fiber optic handoff and the copper RJ-45 Ethernet interface.
A media converter is an active device operating at Layer 1 that receives light signals from a fiber optic line and converts them into electrical signals compatible with copper Ethernet (RJ-45) ports, allowing devices with different transceiver interfaces to communicate seamlessly.

Adım Adım Çözüm

1
Identify the physical layer incompatibility presented in the scenario.
The ISP handoff uses fiber optic cabling (LC connector), whereas the firewall WAN interface requires copper twisted-pair cabling (RJ-45 connector).
Networking hardware devices must match the physical cabling medium (light signals vs electrical pulses) to establish link layer communication.
2
Evaluate hardware devices based on their primary function at the Physical (Layer 1) network boundary.
A media converter is specifically designed to convert optical signals from fiber cabling into electrical signals for copper Ethernet cabling.
Connecting disparate cabling types without replacing host equipment requires a dedicated media conversion device.

Anahtar Kavram

Media converters perform physical layer signal translation between different cabling technologies, such as fiber optic and copper Ethernet.
Tahmini Süre:1m 0s
Soru 2952Soru

A desktop technician needs to connect multiple wired computers within a single office room to allow direct communication on the same local subnet using physical MAC addresses. Which of the following hardware devices is designed to forward traffic between local nodes based on Layer 2 MAC addresses?

Cevabı ve açıklamayı göster

Cevap: Network Switch

Cevap

The network switch is the correct device because it operates at Layer 2 to forward network frames between nodes on the same local subnet using their destination MAC addresses.
A network switch is designed to connect multiple devices within the same local network (LAN) segment. It operates at Layer 2 of the OSI model and inspects destination MAC addresses in received Ethernet frames to forward traffic directly to the correct output port.

Adım Adım Çözüm

1
Identify the primary requirement in the scenario.
Connecting nodes on the same local subnet using MAC addresses (Layer 2 frame switching).
The scenario emphasizes intra-subnet communication and Layer 2 addressing without crossing network boundaries.
2
Evaluate the functions of candidate hardware devices.
A network switch maintains a MAC address table to inspect incoming frames and forward them directly to the appropriate physical port.
Switches handle local Ethernet traffic at the Data Link layer.

Anahtar Kavram

Layer 2 MAC address forwarding by network switches within local subnets.
Soru 2953Soru

A corporate user reports that a laptop immediately turns off as soon as the AC power adapter is disconnected, even though the battery indicator in the operating system previously showed the battery was completely charged. Which of the following components is most likely failing and should be replaced?

Cevabı ve açıklamayı göster

Cevap: Lithium-ion battery pack

Cevap

The Lithium-ion battery pack is the failing component.
The correct answer identifies the Lithium-ion battery pack. Laptops require a functioning internal battery to operate without an active AC power connection. Instant shutdown upon unplugging the AC adapter indicates the battery cells or internal protection circuitry have failed and can no longer supply DC power to the motherboard.

Adım Adım Çözüm

1
Analyze the symptom of instant power loss when disconnecting the AC adapter.
Identified that the laptop relies entirely on external AC power and receives no electrical output from the internal power reservoir.
A functional battery should seamlessly seamlessly take over supplying system voltage when AC power is removed.
2
Evaluate the false 100% charge status reported by the operating system.
Determined that the battery's internal management circuit or battery cells have degraded, reporting inaccurate state of charge while failing under load.
Degraded Li-ion battery cells can register voltage indicating full charge while lacking the current capacity needed to run the laptop.
3
Select the appropriate hardware replacement component.
Replacing the main laptop battery restores mobile power operation.
The main battery is the single component responsible for storing electrical power for un-tethered operation.

Anahtar Kavram

Laptop Power Systems and Battery Diagnostics
Soru 2954Soru

A field technician is procuring hardware components to upgrade the system memory on a fleet of corporate laptops. Which of the following RAM form factors must the technician select to ensure physical compatibility with the laptop motherboard slots?

Cevabı ve açıklamayı göster

Cevap: SO-DIMM

Cevap

SO-DIMM is the required RAM form factor for laptop hardware upgrades.
SO-DIMM (Small Outline Dual In-line Memory Module) is specifically engineered for laptops and portable computing hardware where internal footprint is limited.

Adım Adım Çözüm

1
Identify the target device form factor
The devices being upgraded are corporate laptops.
Laptops require small-form-factor internal components due to space restrictions.
2
Match the memory expansion requirement to the appropriate RAM specification
Laptops require SO-DIMM (Small Outline Dual In-line Memory Module) modules.
SO-DIMMs are roughly half the length of standard desktop memory modules, allowing them to fit into laptop motherboards.

Anahtar Kavram

Laptop RAM Form Factors (SO-DIMM vs Desktop DIMM)
Soru 2955Soru

Match each mobile synchronization or integration technology with its primary functional description.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Single Sign-On (SSO)
Mobile Device Management (MDM)
Exchange ActiveSync
USB Tethering

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Single Sign-On (SSO) pairs with authentication once across services; Mobile Device Management (MDM) pairs with administrative security policies and remote wipes; Exchange ActiveSync pairs with enterprise email, contacts, and calendar synchronization; USB Tethering pairs with sharing cellular data over a physical cable.
Single Sign-On (SSO) provides federated single authentication across cloud applications. Mobile Device Management (MDM) allows corporate administrators to push device security policies and perform remote data wipes. Exchange ActiveSync handles multi-directional synchronization of enterprise mail, calendar, and contacts. USB Tethering allows sharing a mobile internet connection with a PC using a physical USB cable connection.

Adım Adım Çözüm

1
Identify the purpose of Single Sign-On (SSO)
Match SSO to central user authentication across multiple cloud applications.
SSO streamlines user access by validating identity once for all connected enterprise cloud platforms.
2
Identify the purpose of Mobile Device Management (MDM)
Match MDM to corporate security policy enforcement and remote device management.
MDM suites give IT administrators central control over mobile device configurations, profiles, and remote data wiping.
3
Identify the purpose of Exchange ActiveSync
Match Exchange ActiveSync to real-time synchronization of corporate mail, contacts, and calendar data.
Exchange ActiveSync is tailored specifically for keeping mobile PIM (Personal Information Manager) data in sync with an Exchange server.
4
Identify the purpose of USB Tethering
Match USB Tethering to wired cellular data sharing.
Tethering over USB relies on a physical cable to route a host computer's internet traffic through the phone's mobile network.

Anahtar Kavram

Mobile Synchronization and Remote Integration Protocols
Soru 2956Soru

A field technician replaces an internal Lithium-ion battery in a corporate laptop. After reassembling the chassis and connecting the original AC adapter, the laptop powers on successfully under AC power, but the operating system battery status indicator displays 'Plugged in, not charging' and the battery LED blinks an error pattern. Which of the following actions should the technician perform NEXT?

Cevabı ve açıklamayı göster

Cevap: Perform an Embedded Controller (EC) reset by disconnecting AC power and holding down the power button for 15 to 30 seconds.

Cevap

The technician should perform an Embedded Controller (EC) reset by disconnecting AC power and holding down the power button for 15 to 30 seconds.
Performing an Embedded Controller (EC) reset clears residual power (flea power) and forces the laptop system controller to properly handshake with and re-detect the replacement internal battery. This is the fastest, least invasive, and standard next troubleshooting step when a newly installed battery shows 'Plugged in, not charging'.

Adım Adım Çözüm

1
Identify the symptom
The laptop operates on AC power but the newly installed internal battery is not recognized or charging.
The Embedded Controller (EC) manages low-level hardware power functions and may still hold stale battery status state from the old battery.
2
Apply non-invasive troubleshooting steps
Perform a flea power / EC reset by removing power sources and holding down the power button.
This drains residual charge from circuit capacitors and resets the EC register, prompting it to re-detect the new battery upon startup.

Anahtar Kavram

Embedded Controller (EC) Power Management and Battery Detection
Soru 2957Soru

A network administrator needs to centralize event logs, status warnings, and error alerts generated by network devices such as switches, routers, and firewalls into a single monitoring repository. Which network host service or server role should the administrator deploy to collect these system log messages?

Cevabı ve açıklamayı göster

Cevap: Syslog server

Cevap

Syslog server
A Syslog server is designed specifically to aggregate event log data from remote devices across the network, making it easier for administrators to monitor system performance and diagnose network issues from a single console.

Adım Adım Çözüm

1
Identify the primary requirement
The requirement calls for a service that centralizes logging and monitoring messages from infrastructure hardware like switches and routers.
Centralizing log data enables administrators to perform audit trails and troubleshoot network health efficiently.
2
Evaluate the matching server role
A Syslog server receives logging messages transmitted by network hosts and infrastructure hardware.
Syslog is the standard protocol utilized by network hardware to transmit system logging notifications.

Anahtar Kavram

Syslog Server Role and Centralized Logging
Tahmini Süre:45s
Soru 2958Soru

An IT security analyst at a software consulting firm discovers that several sales representatives using company-owned Android smartphones downloaded an unapproved lead-tracking utility directly from a third-party website using their mobile browsers. To prevent future security risks associated with unauthorized software installations, which configuration setting should the system administrator enforce on all managed mobile devices?

Cevabı ve açıklamayı göster

Cevap: Disable the installation of applications from unknown sources

Cevap

Disable the installation of applications from unknown sources
Disabling application installations from unknown sources enforces corporate security policy by prohibiting users from downloading and installing executable packages (such as APK files) from untrusted websites outside official app stores.

Adım Adım Çözüm

1
Analyze the reported security risk.
Users are downloading and installing unapproved APK files directly from web browsers outside official app stores (sideloading).
Installing apps from unverified sources bypasses standard repository security vetting.
2
Identify the appropriate preventative administrative control.
Enforce a policy restricting installation from unknown sources.
This setting restricts mobile OS installation permissions so only signed applications from authorized repositories can be installed.

Anahtar Kavram

Sideloading and Unknown Sources Security Restrictions
Soru 2959Soru

A field sales representative uses a personal Android smartphone within a corporate Bring Your Own Device (BYOD) program. The organization's security officer requires that sensitive corporate emails and proprietary customer attachments remain encrypted at rest, isolated from personal storage, and protected against copying data into unauthorized personal applications. Furthermore, the corporate IT department must not hold permissions to inspect or remotely wipe the employee's personal photos or private applications. Which configuration setting or management strategy should the IT support technician implement on the device?

Cevabı ve açıklamayı göster

Cevap: Implement application containerization governed by Mobile Application Management (MAM) policies.

Cevap

Implement application containerization governed by Mobile Application Management (MAM) policies.
Application containerization managed through Mobile Application Management (MAM) creates a secure logical boundary around business apps and data on a personal device. It allows IT administrators to apply Data Loss Prevention (DLP) controls—such as prohibiting data copying to unmanaged apps—and perform selective remote wipes of business content without inspecting or deleting the user's personal photos and applications.

Adım Adım Çözüm

1
Analyze the operational and security requirements of the BYOD scenario.
Identified the need to protect corporate data at rest, restrict copy-paste actions into personal apps, and prevent IT from accessing or wiping personal user content.
BYOD environments require clear boundaries between corporate control and personal privacy.
2
Evaluate the management scopes of Mobile Application Management (MAM) versus Mobile Device Management (MDM).
Determined that MDM applies full-device policies and remote wipes (unsuitable for personal privacy), while MAM controls specific corporate apps and data containers.
MAM provides application containerization, data loss prevention (DLP), and selective wipe capability without taking over personal device storage.
3
Select the resolution that aligns with the corporate security mandate.
Configuring MAM containerization fulfills all encryption, isolation, and selective management criteria.
MAM policies isolate corporate workspace data while preserving personal user autonomy.

Anahtar Kavram

Mobile Application Management (MAM) and Application Containerization in BYOD Environments
Tahmini Süre:2m 0s
Soru 2960Soru

Match each laptop hardware servicing scenario on the left with the correct internal component or module required on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Expanding system memory on a laptop requiring a compact form-factor memory module.
Restoring power to a CCFL backlight on an older LCD panel showing a faint screen image.
Installing a high-speed internal solid-state drive directly into a motherboard key slot.
Upgrading internal WLAN connectivity using an expansion slot connected to antenna leads.

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Expanding system memory matches SODIMM; restoring power to CCFL backlight matches Display Inverter Board; installing high-speed SSD directly to motherboard matches M.2 NVMe Solid-State Drive; upgrading internal WLAN matches M.2 / Mini PCIe Wi-Fi Card.
Each laptop hardware scenario correctly maps to its respective component: SODIMMs provide compact system memory, display inverters convert DC to AC power for legacy CCFL LCD backlights, M.2 NVMe SSDs provide compact direct-attached storage, and internal M.2/Mini PCIe cards interface with wireless antenna leads for network connectivity.

Adım Adım Çözüm

1
Identify memory module form factors for mobile hardware.
Laptops use SODIMM modules rather than full-size desktop DIMM modules.
Compact chassis design requires smaller footprint RAM modules.
2
Analyze display lighting failure symptoms.
Faint image visible with external light indicates missing backlight power provided by the display inverter on CCFL-based LCD screens.
The inverter supplies AC power to CCFL tubes; failure leaves the LCD matrix operational but unlit.
3
Select appropriate high-speed direct motherboard storage.
M.2 NVMe drives plug directly into M.2 slots for high performance.
M.2 form factor eliminates SATA data and power cabling.
4
Identify wireless adapter expansion interfaces.
Internal Wi-Fi adapters use M.2 or Mini PCIe form factors connected to antenna cables.
Provides modular Wi-Fi upgrading within internal chassis slots.

Anahtar Kavram

Laptop Internal Hardware Components and Form Factors
ÖncekiSayfa 148 / 178Sonraki
Tüm alıştırma soruları — CompTIA A+ (Core 1 & Core 2) | Examkin