Tüm alıştırma soruları

3551 soru

Soru 2961Soru

A network technician is configuring centralized logging for multiple edge routers and firewalls. The security policy requires all network infrastructure devices to send event logs over UDP port 514 to a dedicated host for storage and analysis. Which of the following network host services must be deployed to fulfill this requirement?

Cevabı ve açıklamayı göster

Cevap: Syslog server

Cevap

The correct host service is a Syslog server, which receives and stores event messages sent from network infrastructure equipment over UDP port 514.
A Syslog server is designed specifically to gather, organize, and store event messages and system warnings generated by routers, switches, firewalls, and other network hosts. By default, syslog uses UDP port 514 to receive formatted log messages.

Adım Adım Çözüm

1
Identify the functional requirement in the scenario.
The scenario requires collecting and storing centralized event logs transmitted over UDP port 514.
Security logging across enterprise routers and firewalls requires a designated server role capable of listening for standardized log protocol traffic.
2
Match the protocol and port (UDP 514) to the standard network server role.
UDP port 514 is the standard protocol port for Syslog data transmission.
Syslog is the standard logging framework used by network devices to send status and diagnostic messages across IP networks.

Anahtar Kavram

Syslog Server Role and UDP Port 514
Soru 2962Soru

A corporate IT department deploys multi-monitor docking stations for mobile users equipped with laptops featuring USB Type-C physical ports. When connected to the docking station via a USB Type-C cable, the mobile device charges successfully and built-in USB peripheral ports on the dock function normally, but no video output is detected on the external dual monitors. Diagnostic testing confirms the external monitors and DisplayPort cables are fully functional, and all drivers are updated. Which of the following technical explanations best identifies why charging and USB data function properly while external video fails?

Cevabı ve açıklamayı göster

Cevap: The laptop's physical USB Type-C port lacks native host-controller support for DisplayPort Alternate Mode (Alt Mode), requiring a USB graphics adapter powered by DisplayLink software to drive external displays.

Cevap

The host laptop's physical USB Type-C port does not feature hardware support for DisplayPort Alternate Mode, requiring a software-emulated USB graphics dock such as DisplayLink to output video.
The correct answer identifies that physical USB Type-C connector integration does not automatically imply support for DisplayPort Alternate Mode (Alt Mode). USB Type-C host ports must be wired specifically to support Alt Mode signal multiplexing. When Alt Mode is absent on the host laptop, standard display passthrough fails even though power delivery and standard USB data function normally. Resolving this requires a software-driven USB graphics dock (such as DisplayLink).

Adım Adım Çözüm

1
Analyze the reported symptoms and functional interfaces.
Power Delivery (PD) and standard USB data transfer function properly, confirming physical cable contact, basic USB protocol operation, and power negotiation.
Isolating which functions work helps narrow down whether the issue is a physical hardware fault or a protocol capability mismatch.
2
Evaluate the requirement for native video over USB Type-C connectors.
Native video output across USB Type-C relies on Alternate Mode (e.g., DisplayPort Alt Mode or Thunderbolt), which requires dedicated physical routing hardware on the system motherboard and host controller.
A physical USB Type-C port does not automatically guarantee support for high-speed display protocols unless explicitly provisioned by the manufacturer.
3
Identify the proper workaround or root cause for non-Alt Mode Type-C host ports.
If the host controller lacks Alt Mode capabilities, video signals must be compressed and transmitted as standard USB data to a dock equipped with a DisplayLink controller and corresponding host OS drivers.
DisplayLink converts video frames into standard USB data packets, circumventing the need for native DisplayPort Alt Mode hardware lanes on the motherboard.

Anahtar Kavram

USB Type-C Connector Capabilities and Alternate Mode (Alt Mode) Routing
Soru 2963Soru

A network technician is diagnosing performance degradation on a 2.4 GHz wireless network in an office environment. A wireless spectrum analyzer shows that three neighboring access points are configured to use Channel 1, Channel 2, and Channel 6. Users connected to the access point on Channel 2 experience severe packet drops and frame corruption, while users on Channels 1 and 6 maintain stable connections despite high traffic volume. Which of the following best explains why Channel 2 exhibits significantly higher frame corruption than Channels 1 and 6?

Cevabı ve açıklamayı göster

Cevap: Channel 2 causes adjacent channel interference with Channels 1 and 6, generating uncoordinated RF noise that disrupts CSMA/CA clear-channel assessments.

Cevap

Channel 2 causes adjacent channel interference with Channels 1 and 6, generating uncoordinated RF noise that disrupts CSMA/CA clear-channel assessments.
The correct option identifies that Channel 2 creates adjacent channel interference (ACI) with both Channels 1 and 6. In the 2.4 GHz ISM band, each 20 MHz channel spacing requires 25 MHz separation between center frequencies to avoid overlap. Because Wi-Fi radios on Channel 2 cannot decode preamble headers from signals centered on Channels 1 or 6, they treat those transmissions as raw noise. Consequently, CSMA/CA clear-channel assessment fails to defer transmission, resulting in high rates of frame collisions and retransmissions.

Adım Adım Çözüm

1
Analyze the 2.4 GHz Wi-Fi channel allocation and frequency overlap bounds.
In North America, standard 20 MHz channels in the 2.4 GHz band have center frequencies separated by 5 MHz. The standard non-overlapping channels are 1 (2412 MHz), 6 (2437 MHz), and 11 (2462 MHz).
Channels must be separated by at least 25 MHz between center frequencies to prevent spectral overlap.
2
Evaluate the effect of placing an access point on Channel 2 (2417 MHz center frequency).
Channel 2 heavily overlaps with Channel 1 (2412 MHz) and partially overlaps with Channel 6 (2437 MHz).
Overlapping frequencies cause radio frequency energy from adjacent channels to spill over into the passband.
3
Differentiate between Co-Channel Interference (CCI) and Adjacent Channel Interference (ACI).
Devices on the exact same channel (CCI) can decode Wi-Fi preamble headers and use CSMA/CA to take turns transmitting. Devices on adjacent overlapping channels (ACI) perceive each other's signals as raw, undecodable RF noise, breaking CSMA/CA contention mechanisms and causing severe packet collisions.
ACI is significantly more destructive to performance than CCI because CSMA/CA backoff algorithms cannot properly parse the interfering signal's duration.

Anahtar Kavram

Adjacent Channel Interference vs. Co-Channel Interference in 2.4 GHz Wireless Networks
Tahmini Süre:2m 0s
Soru 2964Soru

During a routine audit of a remote branch office, a network technician discovers that several newly installed IP security cameras fail to receive their server-directed configuration profiles upon boot. The cameras are assigned IP addresses in the 192.168.45.0/24 range with a short lease time, but they lack the custom Option 66 parameter pointing to the centralized provisioning server. Further investigation reveals an unauthorized wireless router plugged into a wall port on the same VLAN. Which of the following network host service issues is the MOST likely cause of this problem?

Cevabı ve açıklamayı göster

Cevap: A rogue DHCP server is responding to broadcast lease requests faster than the legitimate server and offering incomplete scope options.

Cevap

A rogue DHCP server on the local subnet is responding to client broadcasts and delivering IP leases without required custom scope options such as Option 66.
When an unauthorized wireless router is connected to a network, its default DHCP service acts as a rogue server. Because DHCP broadcast requests are received by all hosts on the local layer 2 domain, the rogue server can respond faster than the legitimate server. Since consumer routers do not contain corporate scope options like Option 66 (TFTP server specification), devices receiving leases from the rogue server will gain network layer addressing but fail to locate their provisioning server.

Adım Adım Çözüm

1
Analyze the symptoms described in the ticket
Cameras receive valid IP addresses in the 192.168.45.0/24 subnet, but are missing DHCP Option 66 (TFTP boot server address).
Option 66 is a specific DHCP scope option used by network hosts like IP phones and cameras to locate configuration servers.
2
Evaluate the environmental finding
An unauthorized wireless router was connected directly to the local VLAN switch port.
Consumer wireless routers typically have built-in DHCP servers enabled by default on their LAN ports.
3
Correlate host service behavior with the unauthorized device
The unauthorized router's DHCP server responded to local DHCPDISCOVER broadcasts faster than the corporate DHCP server (or relay agent).
DHCP is a race condition; the client accepts the first DHCPOFFER received. The rogue server offered standard IP settings without the corporate Option 66 payload.

Anahtar Kavram

Rogue DHCP Server Identification and Scope Option Delivery
Soru 2965Soru

A field technician is troubleshooting a newly deployed executive laptop. The laptop charges normally when directly connected to its included 65W USB-C AC power adapter. However, when the adapter is plugged into a USB-C multi-port travel hub with power pass-through and the hub is connected to the laptop, the operating system displays a low-power charger warning and the battery slowly drains under load. Which of the following is the MOST likely cause of this issue?

Cevabı ve açıklamayı göster

Cevap: The travel hub reserves a portion of the incoming wattage to power its internal circuitry and attached peripherals, reducing net power delivered to the laptop below its operational requirement.

Cevap

The travel hub reserves a portion of the incoming wattage for its internal circuitry and attached peripherals, reducing the total power delivered to the laptop below its minimum required threshold.
USB-C pass-through hubs subtract operational power (typically 10W to 15W) directly from the attached AC power adapter to operate their own internal chipsets and peripheral ports. When using the laptop's default 65W power adapter through the hub, the net power delivered to the host system drops to approximately 50W–55W. This wattage deficit causes the operating system to display a slow-charger warning and forces the laptop to draw supplemental power from its battery during high-utilization tasks.

Adım Adım Çözüm

1
Analyze baseline charging functionality.
The laptop charges correctly when connected directly to the standard 65W AC adapter, proving that the laptop's battery charging circuit and power adapter are fully operational.
Establishes a baseline and eliminates the AC adapter or internal laptop power hardware as the source of failure.
2
Evaluate the power consumption overhead introduced by the USB-C pass-through hub.
Pass-through hubs deduct overhead power (usually 5W–15W) from the incoming power adapter to drive internal controllers, HDMI converters, USB-A ports, and card readers.
Deducting 15W overhead from a 65W adapter leaves only 50W available to the laptop, which falls short of the system's 65W operational baseline.
3
Determine the proper corrective action.
Supply the hub with a higher-wattage power adapter (e.g., 85W–100W) or plug the 65W adapter directly into the laptop.
Ensures the host laptop receives its full required 65W while still allowing the hub to reserve necessary operational power.

Anahtar Kavram

USB-C Power Delivery Wattage Allocation and Pass-Through Overhead
Soru 2966Soru

A network technician is assembling a telecommunications rack in a satellite office to support workstation drop cables and voice-over-IP (VoIP) phones. The implementation requires punch-down termination for the permanent horizontal Category 6 cable runs coming from wall outlets, as well as delivering direct DC power over network cabling to the VoIP handsets within the local Layer 2 broadcast domain. Which TWO of the following hardware components should the technician install to fulfill these specific requirements?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Patch panel; PoE-capable switch

Cevap

The technician must install a patch panel and a PoE-capable switch.
The combination of a patch panel and a PoE-capable switch fulfills both requirements. The patch panel receives and terminates the permanent horizontal runs from wall outlets onto punch-down blocks, protecting the cables from wear. Short RJ45 patch cables then connect the patch panel ports to the PoE switch, which forwards Ethernet frames within the local broadcast domain and provides DC power over the network cables to operate the VoIP phones.

Adım Adım Çözüm

1
Identify the hardware component required to terminate permanent horizontal cabling runs.
A patch panel is selected because its rear punch-down blocks accept solid-core horizontal Category 6 cabling from wall plates, creating a clean physical cross-connect point.
Directly plugging rigid horizontal cable runs into switch ports causes stress and potential mechanical failure; patch panels bridge structured building wiring to flexible patch cables.
2
Identify the hardware component required to power VoIP handsets over Ethernet cables within the local broadcast domain.
A PoE-capable switch is selected because it supplies power (IEEE 802.3af/at/bt standard) directly over the twisted pairs while handling local Layer 2 packet switching.
PoE switches eliminate the need for separate electrical power adapters at each VoIP phone desk location.

Anahtar Kavram

Structured Cabling Termination and Power over Ethernet (PoE) Provisioning
Soru 2967Soru

Match each laptop hardware component to its corresponding description or characteristic.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

SODIMM
OLED display
Display inverter
M.2 NVMe drive

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

SODIMM matches the compact memory module form factor; OLED display matches the self-emissive screen technology; Display inverter matches the DC-to-AC power converter for legacy CCFL backlights; M.2 NVMe drive matches the high-speed solid-state storage module.
Each laptop hardware component is paired directly with its core technical specification and functional definition as required for CompTIA A+ technician role responsibilities.

Adım Adım Çözüm

1
Identify memory module specifications
Connect SODIMM to the compact RAM form factor designed for laptops.
Laptops use SODIMM modules rather than full-size desktop DIMM modules due to space constraints.
2
Analyze display backlight and power requirements
Associate OLED displays with self-emissive pixels and display inverters with legacy CCFL power conversion.
OLED panels require no backlight, while older LCD panels using Cold Cathode Fluorescent Lamps (CCFLs) require an inverter board to convert DC to AC.
3
Identify internal storage interfaces
Match M.2 NVMe drives to high-speed solid-state storage connected via motherboard expansion slots.
M.2 NVMe SSDs provide high-speed throughput using PCIe lanes in a compact gum-stick form factor.

Anahtar Kavram

Laptop Hardware Components and Upgrades
Soru 2968Soru

A field technician is troubleshooting a high-end laptop whose built-in display remains completely dark during power-on. The laptop successfully boots into the operating system, and video output functions normally when connected to an external monitor via DisplayPort. During physical inspection, the technician verifies that the laptop display panel uses OLED (Organic Light-Emitting Diode) technology. To resolve the dark screen issue, the technician orders a replacement high-voltage inverter board to restore display illumination. Which of the following best evaluates the technician's diagnosis and planned repair strategy?

Cevabı ve açıklamayı göster

Cevap: The repair plan is flawed because OLED displays produce light per pixel and do not use a backlight or an inverter board.

Cevap

The technician's repair plan is flawed because OLED displays generate their own light at the individual pixel level and do not contain a backlight or inverter board.
The evaluation stating that OLED displays produce light per pixel and do not use a backlight or inverter board is correct. OLED (Organic Light-Emitting Diode) technology uses self-emitting pixels. Because there is no separate backlight layer, inverter boards (which convert DC to AC power for legacy CCFL backlights) are completely absent from OLED screen assemblies.

Adım Adım Çözüm

1
Analyze the reported symptoms and hardware specifications.
The laptop boots normally and external video output functions correctly, confirming that the GPU and operating system are working properly. The built-in display panel is identified specifically as an OLED panel.
Isolating the display technology type determines which physical components exist within the laptop screen assembly.
2
Evaluate the function of a high-voltage backlight inverter board.
Inverter boards convert DC power to AC power specifically to illuminate Cold Cathode Fluorescent Lamps (CCFLs) used in older LCD displays.
Understanding component roles prevents ordering incompatible or non-existent replacement parts.
3
Compare OLED architecture with LCD backlighting systems.
OLED panels are self-emissive (each pixel produces its own light) and do not utilize a backlight unit, CCFL tubes, LED arrays, or inverter boards.
Replacing an inverter on an OLED display is impossible because no such component exists in an OLED display assembly.

Anahtar Kavram

OLED Display Architecture vs. LCD Backlighting Components
Soru 2969Soru

A network technician is expanding an office network infrastructure. The design specifications require creating two separate IP subnets for voice and data traffic, routing communications between these subnets, and providing inline power to newly installed IP desk phones over standard Cat 6 Ethernet cabling. Which TWO of the following hardware deployments will satisfy all requirements? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Deploying a Layer 3 switch equipped with Power over Ethernet (PoE) ports; Deploying a Layer 2 PoE-capable switch connected to a dedicated Layer 3 router

Cevap

Deploying a Layer 3 switch equipped with Power over Ethernet (PoE) ports, and deploying a Layer 2 PoE-capable switch connected to a dedicated Layer 3 router.
Routing traffic between subnets requires a Layer 3 device (such as a Layer 3 switch or a dedicated router), while supplying power to IP desk phones over Cat 6 cabling requires PoE capability. Deploying a Layer 3 PoE switch combines both functions in one device, whereas using a Layer 2 PoE switch connected to a Layer 3 router splits the power delivery and routing functions between two suitable devices.

Adım Adım Çözüm

1
Analyze the inline power requirement for IP desk phones.
Hardware must support Power over Ethernet (PoE) to pass electrical power alongside data on Cat 6 cables.
PoE eliminates the need for separate AC power bricks at user workstations.
2
Analyze the network layer requirement for isolating and connecting separate IP subnets.
The infrastructure requires Layer 3 routing functionality.
Layer 2 devices only forward Ethernet frames within a single broadcast domain/subnet. Crossing IP subnet boundaries requires Layer 3 packet routing.
3
Evaluate hardware deployment options against both criteria.
Both a single Layer 3 PoE switch and a Layer 2 PoE switch paired with a Layer 3 router satisfy all criteria.
Both options integrate PoE power delivery with Layer 3 IP routing capacity.

Anahtar Kavram

Layer 2 vs Layer 3 network hardware capabilities and Power over Ethernet (PoE) integration
Tahmini Süre:1m 30s
Soru 2970Soru

A technician is configuring new laptops for an office deployment. Which TWO of the following statements correctly describe laptop power delivery standards and Lithium-ion (Li-ion) battery management best practices? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: USB-C Power Delivery (USB-PD) negotiates power levels between the host and device to allow high-wattage power transmission.; Lithium-ion batteries do not suffer from memory effect, making full deep discharge cycles unnecessary and potentially harmful to long-term health.

Cevap

The correct statements are that USB-C Power Delivery negotiates power levels between the host and device to allow high-wattage power transmission, and that Lithium-ion batteries do not suffer from memory effect, making full deep discharge cycles unnecessary.
USB-C Power Delivery allows dynamic negotiation of higher wattage profiles suited for charging laptops, while Lithium-ion batteries perform best without deep discharge cycles because they do not suffer from battery memory effect.

Adım Adım Çözüm

1
Analyze the features of modern laptop power delivery specifications.
Identify that USB-C Power Delivery (USB-PD) uses active negotiation protocols to deliver flexible power profiles across compatible USB-C hardware.
Different devices require varying wattage and voltage levels for safe power delivery.
2
Evaluate Lithium-ion battery chemical maintenance characteristics.
Confirm that Li-ion cells lack memory effect, so frequent deep discharges degrade battery lifespan rather than improving it.
Li-ion batteries experience optimal longevity with shallow discharge cycles and controlled charge thresholds.

Anahtar Kavram

Laptop Power Systems and Battery Management
Soru 2971Soru

A network administrator is troubleshooting an issue where corporate mobile users cannot synchronize incoming mail folders across multiple endpoints when connected to the internal Wi-Fi network. Outbound traffic filtering logs show that connections to the remote mail server on TCP port 993 are being blocked by the network firewall, whereas outbound connections on TCP port 465 and TCP port 995 are explicitly permitted. The enterprise mail architecture requires secure connection establishment and real-time multi-device folder state synchronization. Which of the following firewall configuration changes should the administrator make to resolve the issue while preserving the required email synchronization features?

Cevabı ve açıklamayı göster

Cevap: Add a firewall rule to permit outbound traffic on TCP port 993 for IMAPS.

Cevap

Add a firewall rule to permit outbound traffic on TCP port 993 for IMAPS.
The correct action is to permit outbound traffic on TCP port 993. IMAP (Internet Message Access Protocol) is specifically designed to synchronize mail states and folder structures across multiple devices. Secure IMAP (IMAPS) uses TCP port 993 to establish encrypted sessions between client endpoints and the mail server.

Adım Adım Çözüm

1
Analyze the technical requirements for email synchronization.
The requirement specifies real-time multi-device folder synchronization, which requires IMAP rather than POP3.
POP3 downloads messages locally to a single client, whereas IMAP maintains folder states centrally across multiple devices.
2
Identify the standard secure port for the required protocol.
IMAPS (IMAP over SSL/TLS) uses TCP port 993.
Security policy requires encrypted communication, making implicitly secure IMAPS on TCP 993 the correct choice.
3
Evaluate firewall logs against the identified protocol and port requirements.
Firewall logs confirm TCP port 993 traffic is currently blocked.
Permitting outbound TCP port 993 traffic directly restores IMAPS connectivity without compromising security or feature requirements.

Anahtar Kavram

Email Protocols and Port Mapping (IMAP vs POP3, Secure Ports)
Soru 2972Soru

A technician is installing ceiling-mounted wireless access points in an office space where no local AC power outlets are available near the mounting locations. Which of the following hardware solutions can supply both electrical power and network data to these access points over standard Ethernet cables? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: A PoE-enabled network switch; A stand-alone PoE injector

Cevap

The correct devices are a PoE-enabled network switch and a stand-alone PoE injector.
Both a Power over Ethernet (PoE) switch and a standalone PoE injector are engineered to inject electrical power alongside data signals onto standard Ethernet copper cabling, enabling devices like wireless access points to run without requiring a local AC power outlet.

Adım Adım Çözüm

1
Identify the physical connection requirement
The scenario requires sending both network data and DC electricity over a single twisted-pair Ethernet cable run.
Ceiling-mounted access points need operating power, but no wall outlets are available at the mounting location.
2
Evaluate candidate hardware capabilities
Both PoE-enabled switches and standalone PoE injectors combine power and data signals onto copper Ethernet cabling.
PoE technology eliminates the need for separate electrical wiring at the device mounting point.

Anahtar Kavram

Power over Ethernet (PoE) hardware enables data and electrical power delivery over standard Ethernet cabling.
Soru 2973Soru

A network administrator is setting up infrastructure server roles for a small office. Match each network host service to its primary default operational port or function.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

DHCP Server
DNS Server
Syslog Server
Web Server (HTTP)

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

DHCP Server pairs with automatically assigning IP addresses (UDP 67/68); DNS Server pairs with domain name resolution (UDP/TCP 53); Syslog Server pairs with centralized event logging (UDP 514); Web Server (HTTP) pairs with delivering web content (TCP 80).
Each service directly maps to its standardized operational function and default network port: DHCP provides automated host IP provisioning (ports 67/68), DNS performs name resolution (port 53), Syslog centralizes event reporting (port 514), and Web (HTTP) serves site pages (port 80).

Adım Adım Çözüm

1
Identify the primary role and ports associated with DHCP.
DHCP manages dynamic allocation of network IP parameters over UDP 67/68.
Prevents manual IP assignment and ensures unique host configuration.
2
Identify the primary role and ports associated with DNS.
DNS maps domain names to destination IP addresses using port 53.
Allows users to locate server resources using names instead of IP numbers.
3
Identify the role of Syslog.
Syslog aggregates error and status log messages sent from network endpoints on port 514.
Provides centralized logging and monitoring across infrastructure components.
4
Identify the standard Web Server (HTTP) role.
HTTP serves unencrypted web pages on TCP port 80.
Matches the fundamental web host service role.

Anahtar Kavram

Network Host Services and Server Roles
Soru 2974Soru

An IT support specialist is configuring automated cloud backups and synchronization on a corporate mobile device. The mobile user requests that cloud data syncs and large media backups execute automatically without consuming cellular data or rapidly depleting battery life during business hours. Which mobile device synchronization configuration best meets these requirements?

Cevabı ve açıklamayı göster

Cevap: Configure background synchronization settings to perform cloud updates only when connected to Wi-Fi and power

Cevap

Configure background synchronization settings to perform cloud updates only when connected to Wi-Fi and power.
Configuring background sync to operate exclusively over Wi-Fi connections while connected to power directly addresses both requirements: it prevents cellular data usage fees and avoids battery drain.

Adım Adım Çözüm

1
Identify the user requirements
The user needs cloud data synchronization to avoid cellular data usage and preserve battery life.
Large cloud backups and file synchronizations consume significant network bandwidth and processing power.
2
Evaluate mobile operating system synchronization settings
Configuring sync parameters to trigger only under Wi-Fi and charging conditions satisfies both constraints.
Wi-Fi connections use unmetered local network access, and charging conditions ensure battery depletion is avoided.

Anahtar Kavram

Mobile Device Cloud Synchronization Control
Soru 2975Soru

A network technician is configuring dynamic network settings for client workstations on a new office subnet. The workstations receive IPv4 addresses successfully, but users report they cannot connect to internal servers using domain names. Additionally, system logs show domain authentication failures caused by time drift between client machines and the domain controller. Which TWO network host services or server roles should be specified in the DHCP scope options to resolve these issues? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: DNS Server; NTP Server

Cevap

The DNS Server and NTP Server roles must be configured in the DHCP scope options to provide name resolution and time synchronization.
DNS provides name resolution so clients can reach servers via domain names, while NTP maintains consistent system clocks across the network to prevent domain authentication failures.

Adım Adım Çözüm

1
Identify the cause of domain name resolution failure.
Determine that clients lack the address of a Domain Name System (DNS) server.
DNS is the network host service responsible for mapping fully qualified domain names to IP addresses.
2
Identify the cause of timestamp-related domain authentication failures.
Determine that clients lack Network Time Protocol (NTP) server information.
NTP keeps client clocks synchronized with domain controllers, which is mandatory for secure authentication protocols.

Anahtar Kavram

Configuring network host services (DNS and NTP) via DHCP scope options to support client name resolution and clock synchronization.
Soru 2976Soru

A healthcare organization's IT department is setting up mobile application security and synchronization controls on corporate smartphones used by field nurses. The organization requires strict isolation of sensitive patient data stored within corporate apps and secure transmission of all application synchronization traffic. Which of the following technical controls should the IT administrator implement? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Apply Mobile Application Management (MAM) containerization policies to restrict copy-paste actions between corporate and personal apps.; Configure secure email and application synchronization protocols utilizing encrypted ports such as IMAPS over port 993.

Cevap

The administrator should apply Mobile Application Management (MAM) containerization policies to prevent data leakage and configure encrypted synchronization protocols such as IMAPS over port 993 for secure transport.
Applying Mobile Application Management (MAM) policies ensures application-level containerization, preventing sensitive corporate data from being copied to unmanaged personal applications. In addition, using encrypted synchronization protocols like IMAPS over port 993 guarantees that sensitive mobile traffic is protected with SSL/TLS encryption during transit.

Adım Adım Çözüm

1
Evaluate data protection and application isolation requirements.
MAM containerization allows administrators to sandbox enterprise app data and restrict clipboard functions (copy/paste) to prevent data leaking into unmanaged apps.
Containerization directly addresses corporate data security on mobile devices at the application layer.
2
Evaluate application traffic encryption requirements.
Configuring email and data sync using SSL/TLS encrypted protocols (such as IMAPS on port 993) protects traffic against eavesdropping.
Standard security posture requires transport-layer encryption for mobile sync protocols.

Anahtar Kavram

Mobile Application Support, MAM Containerization, and Secure Synchronization Ports
Tahmini Süre:1m 15s
Soru 2977Soru

A network technician is troubleshooting connectivity issues affecting mobile handheld scanners in a newly opened fulfillment center. The scanners are unable to reach internal web applications by hostname, and running an IP configuration check on the devices reveals an IPv4 address of 169.254.44.12169.254.44.12 with a subnet mask of 255.255.0.0255.255.0.0. Which TWO network host services must the technician inspect to resolve the automatic addressing failure and enable local hostname resolution?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: DHCP server; DNS server

Cevap

The technician must inspect the DHCP server and the DNS server.
The presence of an APIPA address (169.254.x.x169.254.x.x) signifies that client devices are unable to contact a DHCP server to obtain valid IP configuration details. Additionally, the inability of handheld scanners to resolve application hostnames directly points to a DNS server failure or misconfiguration, as DNS translates hostnames into underlying IP addresses.

Adım Adım Çözüm

1
Analyze the IP configuration symptom
An IP address of 169.254.44.12 falls within the Automatic Private IP Addressing (APIPA) range, confirming that the client failed to receive an IP lease from a DHCP server.
When a client configured for dynamic addressing cannot communicate with a DHCP server, the operating system self-assigns an APIPA address.
2
Analyze the name resolution symptom
Inability to connect to internal services via hostname indicates that domain name resolution is missing or failing.
DNS servers are responsible for resolving human-readable hostnames to numeric IP addresses required for network communication.
3
Identify the required server roles
Verifying the DHCP server restored IP connectivity, while verifying the DNS server restored name resolution.
Both services must function correctly for client devices to receive network parameters and navigate to local servers by name.

Anahtar Kavram

Network Host Services (DHCP for dynamic IP assignment and DNS for hostname resolution)
Soru 2978Soru

A technician is preparing to perform a memory upgrade on a standard corporate laptop. Which memory module form factor should the technician purchase for installation on the laptop motherboard?

Cevabı ve açıklamayı göster

Cevap: SO-DIMM

Cevap

SO-DIMM is the correct memory form factor required for laptop RAM upgrades.
SO-DIMM (Small Outline Dual In-line Memory Module) is specifically designed with a compact footprint to fit into the reduced space of laptop memory slots.

Adım Adım Çözüm

1
Identify the physical constraints of modern laptop memory slots.
Laptops use compact expansion slots due to chassis space limitations.
Standard desktop components cannot physically fit inside portable laptop enclosures.
2
Select the memory module form factor matching laptop system boards.
Choose SO-DIMM modules, which are approximately half the length of standard desktop RAM.
SO-DIMM is specifically engineered to meet small form factor hardware requirements.

Anahtar Kavram

Laptop RAM Form Factors (SO-DIMM vs. DIMM)
Tahmini Süre:45s
Soru 2979Soru

A field technician needs to safely replace a swollen internal lithium-ion battery inside a corporate laptop. In what order should the technician perform the servicing steps from first to last?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence of steps is: 1) Disconnect the external AC power adapter and shut down the laptop completely, 2) Remove the bottom base cover screws and detach the lower panel, 3) Disconnect the internal battery cable connector from the system board, and 4) Unfasten the battery retaining screws and remove the battery unit from the chassis.
When performing internal hardware servicing on a modern laptop, technician safety protocols mandate isolating power sources in a strict order: first disconnect external AC power and power down, remove the outer bottom casing, immediately disconnect the internal battery cable from the motherboard to de-energize circuits, and finally unbolt and extract the physical battery unit.

Adım Adım Çözüm

1
Isolate external power sources
System is completely powered down and safe from AC line spikes.
Prevents electrical hazards and system damage prior to disassembly.
2
Access internal chassis components
Internal system board and battery bay are accessible.
Enables physical access to internal battery fasteners and cables.
3
Disconnect internal battery power
All live electrical potential is disconnected from system circuitry.
Crucial safety step to prevent accidental electrical shorts while handling metallic tools.
4
Unfasten and extract the battery unit
Faulty internal battery is safely removed.
Completes the safe extraction of the damaged component.

Anahtar Kavram

Disassembly sequence and power safety protocol for laptop internal hardware replacement.
Soru 2980Soru

An IT technician is configuring a deployment of high-end mobile tablet devices for field engineers who must connect their devices to external 4K monitors and high-speed external RAID storage arrays requiring transfer rates up to 40 Gbps through a single cable connection. Which physical port technologies or interface protocols MUST be supported by the tablet's USB Type-C interface to meet these requirements? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Thunderbolt 3 or 4 protocol capability; DisplayPort Alternate Mode (Alt Mode)

Cevap

Thunderbolt 3 or 4 protocol capability and DisplayPort Alternate Mode (Alt Mode)
To support 40 Gbps throughput and drive external high-resolution displays over a single physical USB Type-C port, the mobile device hardware controller must support Thunderbolt 3 or 4 protocols for maximum bandwidth and DisplayPort Alternate Mode (Alt Mode) for carrying video signals.

Adım Adım Çözüm

1
Analyze the bandwidth and video output requirements specified in the scenario.
The requirement specifies bandwidth up to 40 Gbps and video output to external 4K monitors over a single USB Type-C connection.
Determining the performance threshold helps identify which specific protocols must run over the physical port.
2
Evaluate protocol throughput standards for USB Type-C physical connectors.
Standard USB 3.2 protocols max out at 10 Gbps (Gen 2x1) or 20 Gbps (Gen 2x2), whereas Thunderbolt 3/4 provides the necessary 40 Gbps bandwidth over USB Type-C.
Physical USB-C connector shape does not guarantee maximum protocol speed without host controller support for Thunderbolt.
3
Identify the standard video transmission protocol for sending display signals through USB Type-C.
DisplayPort Alternate Mode (Alt Mode) enables the transmission of native video data streams over the USB-C pins to drive external monitors.
Without Alt Mode support, the USB-C port cannot natively drive high-resolution external display monitors.

Anahtar Kavram

Mobile device physical ports like USB Type-C require specific underlying controller protocols (such as Thunderbolt 3/4 and DisplayPort Alt Mode) to support high-speed data transfer rates up to 40 Gbps and external multi-monitor video outputs.
Tahmini Süre:2m 0s
ÖncekiSayfa 149 / 178Sonraki
Tüm alıştırma soruları — CompTIA A+ (Core 1 & Core 2) | Examkin