Examkin

Tüm alıştırma soruları

3551 soru

Tüm türler3,551Çoktan seçmeli1,809Çoklu seçim786Sayısal12Eşleştirme521Sıralama423
Soru 3301Soru →

A field technician is setting up a payment kiosk at a temporary event station. The configuration consists of a tablet computer connected via Bluetooth to a portable receipt printer and a wireless handheld barcode scanner operating within a 2-meter radius of the cashier desk. The technician erroneously logs this deployment as a Local Area Network (LAN) in the IT asset database. Which network classification should be recorded to accurately reflect this short-range device environment?

Cevabı ve açıklamayı göster

Cevap: Personal Area Network (PAN)

Cevap

Personal Area Network (PAN)
A Personal Area Network (PAN) is specifically designed for low-power, short-range interconnections between personal devices (such as smartphones, tablets, headsets, and Bluetooth peripherals) centered around an individual user's immediate workspace, typically spanning under 10 meters.

Adım Adım Çözüm

1
Analyze the operational range and connectivity method described in the scenario.
The devices (tablet, Bluetooth receipt printer, barcode scanner) operate within a 2-meter radius using Bluetooth short-range wireless communication.
Determining the physical footprint and transmission protocol establishes the correct network geographic scope.
2
Map the scope attributes to official CompTIA network type classifications.
Networks confined to an individual workstation or personal workspace operating within approximately 10 meters are classified as Personal Area Networks (PANs).
LANs, MANs, and WANs cover buildings, cities, and global boundaries respectively.

Anahtar Kavram

Personal Area Network (PAN) vs LAN/MAN/WAN Geographic Scoping
Soru 3302Soru →

A field engineer needs to connect a mobile workstation tablet featuring a single USB Type-C port to both an external high-resolution monitor and a high-speed external NVMe storage drive. Which TWO of the following specifications or standards must be verified to ensure both video output and high-speed data transfer function properly? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: DisplayPort Alternate Mode (Alt Mode) support on both the mobile device host port and the display cable adapter; USB protocol specification (such as USB 3.2 Gen 2 or Thunderbolt) on both the port controller and cable rather than physical connector shape alone

Cevap

To support both video output and high-speed data transfer over USB Type-C, the system requires DisplayPort Alternate Mode (Alt Mode) support on the host port and adapter, as well as verifying the underlying USB/Thunderbolt protocol standards supported by the host controller and cable.
Transmitting video over USB Type-C requires DisplayPort Alternate Mode (Alt Mode) hardware support on both the device port and the connection cable/adapter. Additionally, achieving high-speed data transfer for external storage requires verifying that the underlying protocol standard (such as USB 3.2 Gen 2 or Thunderbolt) is supported by the host controller and cable, as physical USB Type-C form factors alone do not guarantee high speed or video capability.

Adım Adım Çözüm

1
Identify video transport requirements for mobile USB Type-C ports.
Determine that DisplayPort Alternate Mode (Alt Mode) must be supported by the host hardware and cable adapter to transmit display signals.
USB Type-C requires specific Alt Mode capabilities to output video natively.
2
Identify data bandwidth requirements for external NVMe storage.
Confirm that the host controller and cable support USB 3.2 Gen 2 or Thunderbolt specifications.
The physical USB Type-C connector shape does not guarantee high-speed data transfer rates, as many basic charging cables only support USB 2.0.

Anahtar Kavram

USB Type-C Alternate Modes and Protocol Standards vs Physical Connector Form Factor
Soru 3303Soru →

A network technician is manually configuring a corporate mobile device to synchronize email, calendar, and contacts with an enterprise Exchange server using ActiveSync. Arrange the steps in the correct order to successfully set up secure synchronization.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct procedural order is: first verify network connectivity, enter user credentials, specify server FQDN and SSL encryption, approve the MFA prompt, and finally select the data types to synchronize.
The proper sequence begins with establishing network access, followed by credential entry, specifying server endpoints with SSL encryption, authenticating via MFA, and finally choosing which cloud data types (Mail, Contacts, Calendar) to synchronize.

Adım Adım Çözüm

1
Ensure the device is connected to Wi-Fi or cellular data.
Establishes IP layer routing to external authentication servers.
Without an active network link, account verification cannot proceed.
2
Input email address and password into the account setup wizard.
Initiates the identity handshake.
Credentials identify the user account requesting access.
3
Configure the Exchange server FQDN and enforce SSL encryption.
Establishes a secure TLS channel to the Exchange endpoint.
Encrypting the connection prevents credential interception.
4
Approve the secondary MFA authentication request.
Grants token authorization to access server sync services.
Enterprise security policies require second-factor validation.
5
Select data elements (Mail, Contacts, Calendar) to sync.
Triggers initial background synchronization of requested databases.
Synchronization preferences define which local repositories mirror server data.

Anahtar Kavram

Enterprise Mobile Synchronization Procedure
Soru 3304Soru →

A technician is purchasing a replacement solid-state drive (SSD) for an older laptop motherboard that only supports the SATA protocol through its M.2 internal connector slot. Which type of drive should the technician select to ensure full hardware and protocol compatibility?

Cevabı ve açıklamayı göster

Cevap: An M.2 SATA SSD

Cevap

An M.2 SATA SSD is required because the motherboard slot specifically requires the SATA communication protocol over the M.2 physical connector.
Matching the M.2 physical form factor with the SATA protocol specification guarantees that the storage controller can communicate with the drive without bus or keying mismatches.

Adım Adım Çözüm

1
Identify the physical connector and protocol requirements
The host system requires an M.2 physical form factor drive operating specifically on the SATA protocol.
M.2 slots can support SATA, PCIe/NVMe, or both depending on motherboard pin routing.
2
Match drive specifications to slot capabilities
Select an M.2 drive that utilizes the SATA bus interface.
Installing an NVMe PCIe drive into a SATA-only M.2 slot results in the drive not being recognized by system firmware.

Anahtar Kavram

M.2 Form Factor vs Protocol Compatibility
Soru 3305Soru →

A desktop computer requires additional system memory to support multitasking. Which type of memory module is specifically designed for installation in standard desktop motherboards?

Cevabı ve açıklamayı göster

Cevap: DIMM

Cevap

DIMMs (Dual In-line Memory Modules) are the standard memory module form factor used in full-sized desktop computers.
DIMM (Dual In-line Memory Module) is the standard full-sized RAM module format designed to fit into desktop motherboard memory slots.

Adım Adım Çözüm

1
Identify the system form factor
The target system is a standard desktop computer.
Desktop motherboards use full-length memory expansion slots.
2
Match the memory module type to desktop slots
Select DIMM as the required RAM module type.
DIMMs provide full-length 64-bit data paths designed specifically for desktop motherboards.

Anahtar Kavram

RAM Form Factors (DIMM vs. SO-DIMM)
Soru 3306Soru →

A technician is installing a secondary M.2 solid-state drive into a desktop motherboard. According to the motherboard user manual, the target M.2 slot is connected exclusively to four PCI Express lanes (PCIe x4) and does not route SATA controller lines. The technician installs an M.2 SSD that uses the SATA interface protocol. After turning on the system, the drive is not recognized in the UEFI/BIOS settings. Which of the following best explains why the drive is not detected?

Cevabı ve açıklamayı göster

Cevap: The M.2 slot lacks SATA protocol support, making it incompatible with SATA-based M.2 drives.

Cevap

The M.2 slot lacks SATA protocol support, making it incompatible with SATA-based M.2 drives.
Although M.2 defines the physical card dimension and keying, the underlying data interface depends on motherboard trace routing. If an M.2 slot is wired exclusively for PCIe (NVMe) lanes, a SATA-protocol M.2 drive will not be recognized by the chipset or UEFI/BIOS firmware because there are no SATA data lines connected to that slot.

Adım Adım Çözüm

1
Analyze the motherboard specifications and physical slot configuration.
The target M.2 slot is wired exclusively for PCIe x4 lanes and has no SATA controller lane connections.
M.2 host slots vary by motherboard model; some support both SATA and PCIe protocols, while others support PCIe/NVMe only.
2
Evaluate the drive's protocol requirement against slot capability.
The installed drive relies on the SATA protocol, which cannot transmit signal data over dedicated PCIe bus lines.
Protocol compatibility is required at the electrical and firmware level for the drive to initialize during POST.
3
Determine why the UEFI/BIOS fails to list the device.
The drive fails to initialize because no SATA controller interface exists on that specific M.2 connector.
Without electrical protocol support from the motherboard controller, the device cannot communicate with firmware.

Anahtar Kavram

M.2 Protocol vs. Form Factor Compatibility (SATA vs. NVMe/PCIe)
Soru 3307Soru →

An IT technician is setting up a computer with a legacy monitor. The monitor features a blue port with 15 pins arranged in three rows that carries an analog video signal. Which display cable standard should the technician use to connect the display?

Cevabı ve açıklamayı göster

Cevap: VGA

Cevap

VGA
VGA (Video Graphics Array) uses a distinctive 15-pin DE-15 (often referred to as DB-15) connector organized into three rows, which is traditionally colored blue and used exclusively for analog video signals.

Adım Adım Çözüm

1
Identify the physical properties and signal standard described in the prompt.
The target connector has 15 pins in three rows, is color-coded blue, and carries analog video signals.
Matching connector physical dimensions and pin layouts is key to standard hardware identification.
2
Map these characteristics to the appropriate display standard.
VGA (Video Graphics Array / DE-15) is the standard 15-pin, three-row analog display connector.
DVI-D, HDMI, and USB Type-C are all digital standards that do not match the 15-pin analog port.

Anahtar Kavram

Identifying legacy display connectors by physical format (15-pin, 3-row DE-15) and signal type (analog VGA).
Soru 3308Soru →

A technician is connecting a modern maintenance laptop that features only USB Type-C ports to an legacy industrial control unit that requires a direct RS-232 serial interface via a male DB-9 connector. The connection must allow terminal communication without using network connectivity. Which cable or adapter configuration provides the necessary physical connection and protocol translation for this setup?

Cevabı ve açıklamayı göster

Cevap: A USB Type-C to male DB-9 cable containing an integrated active RS-232 serial bridge chipset

Cevap

A USB Type-C to male DB-9 cable containing an integrated active RS-232 serial bridge chipset
RS-232 serial communications require specific voltage levels and asynchronous data framing that are fundamentally different from USB signals. Connecting a modern laptop via USB Type-C to an RS-232 DB-9 serial port requires an active adapter containing a USB-to-Serial bridge chip (e.g., FTDI chipset) to convert the protocols dynamically.

Adım Adım Çözüm

1
Identify the host and target port types and protocols
Host uses USB Type-C (digital USB protocol); target uses DB-9 RS-232 (legacy serial protocol).
Determines whether passive pin mapping or active protocol conversion is required.
2
Evaluate signal compatibility between USB and RS-232
USB and RS-232 use completely different signal levels, timing, and framing mechanisms, requiring an active converter circuit (such as FTDI or Prolific chipsets).
Passive adapters cannot translate USB packets into RS-232 bitstreams.
3
Select the correct adapter solution
A USB Type-C to DB-9 cable with an integrated active RS-232 serial bridge chipset bridges both the physical interface and protocol gap.
It supplies native serial communication capabilities to modern laptops lacking built-in COM ports.

Anahtar Kavram

RS-232 Serial to USB Protocol Conversion and DB-9 Connectors
Soru 3309Soru →

An IT support technician is upgrading the memory on a high-performance mobile workstation laptop that currently suffers from memory bottlenecks during CAD rendering. The laptop motherboard supports dual-channel DDR4 memory up to 3200 MHz. The technician needs to procure and install a new 32 GB memory configuration. Which TWO of the following specifications or installation steps must the technician ensure to achieve physical compatibility and enable dual-channel mode?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Select 260-pin SO-DIMM modules specifically designed for laptop motherboards.; Install matching memory modules into designated memory slots across both Channel A and Channel B.

Cevap

The technician must select 260-pin SO-DIMM modules for laptop form-factor compatibility and populate matching modules across both Channel A and Channel B slots to activate dual-channel architecture.
Selecting 260-pin SO-DIMM modules ensures correct physical pin keying and dimensions for a laptop memory upgrade. Installing matching modules across separate memory channels allows the memory controller to access RAM concurrently over a 128-bit wide bus, enabling dual-channel operation.

Adım Adım Çözüm

1
Determine the physical form factor required by the system chassis.
Laptops require SO-DIMM form factor modules (260 pins for DDR4), whereas desktop motherboards take standard 288-pin DIMM modules.
Full-sized desktop DIMMs will not fit inside the smaller spatial footprint of a laptop motherboard.
2
Determine the motherboard slot configuration for multi-channel memory operation.
Dual-channel throughput requires placing memory modules into alternating slots belonging to separate channels (Channel A and Channel B).
Installing both modules into adjacent slots on the same channel restricts the system to single-channel 64-bit communication instead of dual-channel 128-bit communication.

Anahtar Kavram

RAM Form Factors and Dual-Channel Slot Population Rules
Soru 3310Soru →

A field technician is deploying a workstation for video rendering. The motherboard's primary PCIe 4.0 x16 slot is occupied by a high-end graphics card. The technician installs a passive quad-M.2 PCIe expansion card populated with four identical M.2 NVMe PCIe 4.0 x4 SSDs into a secondary physical PCIe 4.0 x16 slot. Upon booting the operating system, only one of the four installed M.2 drives is detected in Disk Management. Which of the following best explains the cause of this issue and the necessary solution?

Cevabı ve açıklamayı göster

Cevap: The secondary slot lacks PCIe lane bifurcation and provides only x4 electrical lanes from the chipset; the card requires a CPU-connected slot supporting x4x4x4x4 bifurcation or an expansion card with an onboard PCIe bridge chip.

Cevap

The secondary expansion slot lacks PCIe lane bifurcation support and only provides four electrical lanes from the chipset. To fix this, the expansion card must be installed in a slot supporting x4x4x4x4 bifurcation, or an expansion card with an onboard PCIe bridge switch chip must be used.
Passive multi-M.2 card adapters pass individual PCIe lanes directly from the slot to each drive connector. Reading all four NVMe SSDs requires either motherboard PCIe slot bifurcation (splitting the x16 slot into x4x4x4x4) or an active expansion card equipped with a hardware PCIe bridge switch chip.

Adım Adım Çözüm

1
Analyze the hardware components and symptoms.
A passive quad-M.2 expansion card holding four M.2 NVMe drives (each requiring 4 PCIe lanes, totaling 16 lanes) is installed in a secondary slot where only 1 drive is recognized.
Passive M.2 adapter cards do not contain PCIe switches to multiplex signals; they simply route individual PCIe lanes directly from the slot to each M.2 socket.
2
Identify the requirement for passive multi-M.2 carrier cards.
For four NVMe SSDs to work on a single card without a dedicated PCIe switch chip, the host PCIe slot must support PCIe bifurcation (splitting an x16 link into four independent x4 links, or x4x4x4x4).
If the slot only provides electrical x4 lanes from the chipset or does not support x4x4x4x4 bifurcation, only the first drive directly wired to lanes 1-4 will be detected.
3
Determine the correct resolution.
Relocate the card to a slot that supports PCIe slot bifurcation (x4x4x4x4) or replace the passive card with an active expansion card containing an onboard PCIe bridge switch.
An active switch card can multiplex multiple M.2 NVMe drives over existing PCIe lanes without requiring host motherboard bifurcation.

Anahtar Kavram

PCIe lane allocation, M.2 NVMe protocol requirements, and PCIe slot bifurcation
Tahmini Süre:2m 0s
Soru 3311Soru →

A senior systems administrator is auditing storage drive form factors and interface protocols across a enterprise infrastructure environment. Match each solid-state storage interface specification on the left with its corresponding physical architecture or bus signaling characteristic on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

M.2 Socket 2 (B-Key) NVMe SSD
M.2 Socket 3 (M-Key) SATA SSD
U.2 (SFF-8639) NVMe SSD
mSATA SSD

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

M.2 Socket 2 (B-Key) NVMe SSD matches the PCIe x2 throughput restriction. M.2 Socket 3 (M-Key) SATA SSD matches the 6 Gbps SATA III speed limit. U.2 (SFF-8639) NVMe SSD matches the 2.5-inch form factor with PCIe x4 signal routing. mSATA SSD matches the Mini PCIe physical layout with SATA signaling.
Each storage interface matches its specific hardware architecture: B-key M.2 connectors support up to PCIe x2; M-key SATA SSDs are limited by SATA III throughput (6 Gbps); U.2 (SFF-8639) provides PCIe x4 signaling to 2.5-inch drive bays; and mSATA uses Mini PCIe physical pinouts to transport SATA signals.

Adım Adım Çözüm

1
Examine M.2 physical keying standards and pin assignments.
B-Key (Socket 2) supports SATA and up to PCIe x2 lanes, whereas M-Key (Socket 3) supports up to PCIe x4 lanes.
Keying pinouts establish physical constraints on available bus bandwidth.
2
Differentiate physical M.2 slot capability from drive controller protocol.
An M.2 drive using the SATA protocol inserted into an M-key PCIe slot remains constrained to SATA III throughput.
Host signaling protocol determines transfer speed regardless of connector pin count.
3
Identify enterprise 2.5-inch high-density NVMe drive standards.
U.2 uses the SFF-8639 multi-protocol connector to supply four PCIe lanes to standard 2.5-inch drive form factors.
U.2 allows hot-swappable enterprise bays to achieve full NVMe speeds.
4
Distinguish legacy mini-card hardware layouts.
mSATA matches Mini PCIe mechanically, but electrically routes pure SATA controller signaling.
Form factor overlap requires understanding signal multiplexing to avoid compatibility misconfigurations.

Anahtar Kavram

Storage Drive Interface Standards, Physical Keying, and Signaling Protocols
Soru 3312Soru →

A system technician is deploying and configuring various storage interfaces and form factors across enterprise servers and desktop workstations. Match each storage interface specification on the left with its corresponding technical characteristic or operational constraint on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

M.2 M-Key (Socket 3) NVMe SSD
M.2 B-Key (Socket 2) SATA SSD
U.2 (SFF-8639) NVMe SSD
eSATA (External SATA) Interface

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

M.2 M-Key (Socket 3) NVMe SSD matches with PCIe x4 bandwidth notched at pins 59–66; M.2 B-Key (Socket 2) SATA SSD matches with SATA speeds (up to 6 Gbps) or PCIe x2 notched at pins 12–19; U.2 (SFF-8639) NVMe SSD matches with 2.5-inch form factor using 4 PCIe lanes via integrated backplane connector; eSATA Interface matches with 6 Gbps transfer speeds over shielded cables up to 2 meters without native power supply.
Each storage interface specification is accurately paired with its specific bus protocol, physical form factor, keying pinout, or power delivery capability.

Adım Adım Çözüm

1
Identify M.2 physical keying and bus routing specifications.
M-Key utilizes pins 59–66 and up to 4 PCIe lanes for high-throughput NVMe drives. B-Key utilizes pins 12–19 and is limited to SATA or 2 PCIe lanes.
M.2 physical keying dictates pin compatibility and underlying bus lane allocation.
2
Analyze U.2 enterprise storage connector characteristics.
U.2 (SFF-8639) packages 4 PCIe lanes into a 2.5-inch drive form factor suited for hot-swappable enterprise server backplanes with integrated power pins.
U.2 allows standard 2.5-inch drive enclosures to leverage high-speed NVMe PCIe bandwidth.
3
Evaluate eSATA cabling and power constraints.
eSATA matches internal SATA data speeds (up to 6 Gbps) with shielded cabling up to 2 meters, but requires an independent external power connection.
eSATA is strictly a data transfer interface and does not supply DC power over its cable.

Anahtar Kavram

Storage Interface Standards, Physical Keying, and Bus Architecture
Soru 3313Soru →

A desktop technician is replacing a failed stock CPU heatsink with an upgraded thermal cooling unit. After removing the original heatsink, which of the following actions should the technician take before securing the new cooling unit to the processor?

Cevabı ve açıklamayı göster

Cevap: Clean the top of the processor with isopropyl alcohol and apply fresh thermal compound

Cevap

Clean the top of the processor with high-purity isopropyl alcohol to remove old thermal material, then apply a small amount of fresh thermal compound before mounting the new heatsink.
Whenever replacing a CPU cooler or heatsink, any existing thermal paste must be cleaned off the CPU heat spreader using high-purity isopropyl alcohol and a lint-free cloth. Fresh thermal paste must then be applied to eliminate air gaps between the CPU surface and the new heatsink base, ensuring effective heat conduction.

Adım Adım Çözüm

1
Inspect the CPU thermal surface
Residual thermal compound from the old heatsink is identified on the integrated heat spreader (IHS).
Old thermal paste degrades, dries out, and creates thermal barriers if reused.
2
Clean the surface thoroughly
The CPU heat spreader is wiped clean with isopropyl alcohol and a lint-free cloth.
Isopropyl alcohol cleans oils and residue without damaging electronic components.
3
Apply fresh thermal paste and mount the cooler
A pea-sized amount of thermal compound is applied, and the new heatsink is installed.
Fresh paste fills microscopic imperfections between the metal surfaces to ensure efficient heat transfer.

Anahtar Kavram

CPU Thermal Interface Material Cleaning and Application
Soru 3314Soru →

A desktop support technician is preparing to replace a motherboard and processor during a workstation upgrade. The technician notes that the target motherboard utilizes a Land Grid Array (LGA) CPU socket architecture. Which of the following describes a defining physical characteristic of an LGA processor socket?

Cevabı ve açıklamayı göster

Cevap: The delicate contact pins are located inside the motherboard socket rather than on the underside of the CPU package.

Cevap

The delicate contact pins are located inside the motherboard socket rather than on the underside of the CPU package.
In a Land Grid Array (LGA) socket architecture, the delicate array of contact pins is mounted on the motherboard socket itself. The underside of the CPU package contains flat conductive pads (lands) that make contact with these pins when clamped down.

Adım Adım Çözüm

1
Identify the CPU socket packaging type referenced in the scenario.
The target system uses a Land Grid Array (LGA) socket.
Determining the socket type establishes where the physical pin contacts reside.
2
Differentiate between LGA, PGA, and BGA physical designs.
LGA places spring-loaded pins inside the motherboard socket mating with flat contact pads (lands) on the bottom of the processor chip.
This physical design protects processor pins during handling but makes motherboard socket pins vulnerable to bending.

Anahtar Kavram

CPU Socket Architectures (LGA vs PGA vs BGA)
Tahmini Süre:1m 0s
Soru 3315Soru →

A server technician is deploying storage controller cards and drive arrays for a enterprise workstation. The deployment involves both Serial Attached SCSI (SAS) and Serial ATA (SATA) storage drives. Which TWO of the following statements correctly describe the compatibility and operational characteristics of SAS and SATA storage interfaces? (Select TWO)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: SAS host bus adapters (HBAs) can accept and communicate with SATA hard drives using standard backplanes or adapter cables.; SAS interfaces support dual-porting for multipath redundancy, whereas SATA interfaces support only single-port connections.

Cevap

SAS host bus adapters (HBAs) can accept and communicate with SATA hard drives, and SAS interfaces support dual-porting for multipath redundancy whereas SATA interfaces support only single-port connections.
The correct options accurately identify that SAS controllers support SATA drives via protocol tunneling, and that SAS drives offer enterprise dual-porting for redundant pathing while SATA is restricted to single-port connections.

Adım Adım Çözüm

1
Evaluate protocol backward compatibility between SAS and SATA controllers.
SAS controllers support Serial ATA Tunneling Protocol (STP), allowing SATA drives to work on SAS HBAs. However, native SATA controllers cannot command SAS drives.
Understanding signaling protocols determines host-to-drive interoperability.
2
Examine physical connector keying differences between SAS and SATA drives.
SAS drives have a continuous connector bridge between power and data contacts, blocking individual SATA data cables from attaching.
Physical keying prevents attaching incompatible host controllers to high-voltage or incompatible drives.
3
Analyze enterprise redundant features such as dual-porting.
SAS provides two physical data channels on its interface connector for high availability and failover, whereas SATA provides a single port channel.
Enterprise storage standards prioritize multipath connectivity for reliability.

Anahtar Kavram

SAS vs SATA Compatibility and Physical/Protocol Differences
Soru 3316Soru →

A server technician is upgrading a system by connecting SATA-based solid-state drives (SSDs) to an existing SAS backplane managed by a PCIe hardware RAID controller. The installation is successful. However, when the technician attempts the reverse configuration by connecting a SAS hard drive directly to a motherboard's native SATA controller port in a desktop system, the drive is not recognized and fails to function. Which of the following explains the technical reason for this outcome?

Cevabı ve açıklamayı göster

Cevap: SAS controllers and backplanes are engineered with backward compatibility for the SATA protocol, whereas native SATA controllers lack the software command set and signal logic required to communicate with SAS drives.

Cevap

SAS host controllers and backplanes are designed with backward compatibility to accept SATA protocol drives through SATA Tunneling Protocol (STP), but native SATA motherboard controllers do not support SAS command sets or signaling logic, preventing SAS drives from working on SATA ports.
SAS hardware controllers and backplanes implement the SATA Tunneling Protocol (STP) to achieve backward compatibility with SATA hard drives and SSDs. However, this compatibility is strictly one-directional; native consumer SATA host controllers lack the physical hardware logic, dual-port signaling, and SCSI command set needed to communicate with SAS drives.

Adım Adım Çözüm

1
Analyze SAS host controller capability with SATA drives.
SAS controllers include the SATA Tunneling Protocol (STP), allowing SATA drives to communicate smoothly when plugged into SAS backplanes.
Enterprise SAS standards were deliberately designed to be backward-compatible with lower-cost SATA drives.
2
Analyze native SATA controller capability with SAS drives.
SATA controllers only understand the SATA signaling protocol and AHCI/IDE command sets; they possess no understanding of SCSI command sets or SAS dual-port signaling.
Desktop SATA hardware is consumer-oriented and lacks the complex protocol translation hardware required for enterprise SAS drives.
3
Evaluate the outcome of connecting a SAS drive to a SATA controller.
The motherboard's SATA controller cannot initialize or communicate with the SAS drive, rendering it unrecognized.
Compatibility is strictly one-way (SAS controllers accept SATA drives, but SATA controllers do not accept SAS drives).

Anahtar Kavram

SAS and SATA Controller Backward Compatibility
Soru 3317Soru →

A network administrator is upgrading a financial data server that currently contains two 16 GB16\text{ GB} DDR4 unbuffered ECC (ECC UDIMM) modules installed in memory slots A1 and B1. To expand system capacity to 64 GB64\text{ GB}, two additional 16 GB16\text{ GB} DDR4 registered ECC (RDIMM) modules with matching clock speed (3200 MT/s3200\text{ MT/s}) and operating voltage (1.2 V1.2\text{ V}) are inserted into slots A2 and B2. Upon powering on, the system fails to Power-On Self-Test (POST) and emits a memory initialization error beep code. Which of the following is the primary cause of this system failure?

Cevabı ve açıklamayı göster

Cevap: Unbuffered memory (UDIMM) and registered memory (RDIMM) technologies are fundamentally incompatible and cannot be mixed within the same system.

Cevap

Unbuffered (UDIMM) and registered (RDIMM) memory modules cannot be mixed within the same system.
Unbuffered RAM (UDIMM) and Registered RAM (RDIMM) have different electrical signaling characteristics. RDIMMs incorporate an onboard register chip to buffer control and address signals between the memory modules and the memory controller, reducing electrical load on the host bus. UDIMMs lack this register and communicate directly with the memory controller. Because the memory controller cannot simultaneously adjust its signaling timing and electrical parameters for both buffered and unbuffered modules, mixing UDIMM and RDIMM results in a failed POST routine.

Adım Adım Çözüm

1
Analyze the existing memory specifications and the newly installed modules.
Identified existing modules as 16 GB16\text{ GB} DDR4 ECC UDIMM and new modules as 16 GB16\text{ GB} DDR4 ECC RDIMM.
Although both sets share identical capacities (16 GB16\text{ GB}), speeds (3200 MT/s3200\text{ MT/s}), and operating voltages (1.2 V1.2\text{ V}), UDIMMs and RDIMMs differ in physical buffer architecture.
2
Evaluate memory controller buffering rules.
Determined that RDIMMs contain a hardware register chip that buffers control/address lines, while UDIMMs connect directly to the memory controller.
Motherboard memory controllers cannot operate in a hybrid mode handling both buffered and unbuffered signaling simultaneously.
3
Identify the cause of the POST failure.
Mixing UDIMM and RDIMM modules causes the memory controller initialization check to fail during POST.
All installed RAM modules must match in buffering type (all UDIMM or all RDIMM) for the motherboard memory bus to function.

Anahtar Kavram

RAM Types and Compatibility (UDIMM vs. RDIMM Mixing Restrictions)
Soru 3318Soru →

A technician is inspecting desktop motherboard socket designs before ordering replacement processors for an office workstation upgrade. Which of the following statements correctly describe the characteristics of Land Grid Array (LGA) CPU sockets? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: The pins are located inside the motherboard socket rather than on the processor package.; LGA socket designs lower the risk of damaging processor pins during CPU handling and installation.

Cevap

Land Grid Array (LGA) sockets feature pins positioned inside the motherboard socket rather than on the processor package, and this design significantly reduces the risk of damaging pins directly on the CPU package during handling.
Land Grid Array (LGA) CPU sockets house the spring-loaded contact pins directly inside the motherboard socket, mating with flat landing pads on the CPU. This architectural choice protects the CPU package from bent pins during installation and transport.

Adım Adım Çözüm

1
Identify the pin orientation of Land Grid Array (LGA) packaging.
LGA sockets place the contact pins inside the motherboard socket grid, mating with flat golden contact pads (lands) located on the bottom of the processor.
This contrasts with PGA sockets where pins extend directly from the CPU package.
2
Evaluate the practical advantage of LGA CPU handling.
Because the CPU itself lacks fragile pins, technicians are far less likely to bend pins when handling or transporting the processor.
Accidental pin damage is transferred from the expensive processor to the motherboard socket.
3
Differentiate LGA from PGA and BGA architectures.
Protruding pins on the processor define Pin Grid Array (PGA), while surface-mounted soldered processors define Ball Grid Array (BGA).
Recognizing socket mechanical designs prevents incorrect component selection during desktop CPU upgrades.

Anahtar Kavram

LGA vs PGA vs BGA CPU Socket Architecture Traits
Soru 3319Soru →

A technician is evaluating various processor socket designs, thermal management technologies, and CPU architectural features during a hardware audit. Match each CPU concept or component on the left with its corresponding technical characteristic or operational function on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Land Grid Array (LGA)
Vapor Chamber Cooling
Thermal Paste (TIM)
Simultaneous Multithreading (SMT)

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Land Grid Array (LGA) matches the characteristic of having contact pins on the motherboard socket. Vapor Chamber Cooling matches utilizing a flat, hollow sealed copper enclosure filled with fluid that evaporates and condenses. Thermal Paste (TIM) matches filling microscopic surface imperfections between the processor heat spreader and heatsink base. Simultaneous Multithreading (SMT) matches allowing a single physical CPU core to execute two concurrent threads.
Each CPU component or architectural concept correctly aligns with its unique physical or operational property: LGA features motherboard-side socket pins; Vapor Chamber technology uses planar liquid-vapor phase change; Thermal Paste fills microscopic air gaps between heat-generating and heat-dissipating surfaces; and SMT enables two threads per physical core.

Adım Adım Çözüm

1
Identify socket pin location for Land Grid Array (LGA).
In LGA sockets, pins are located on the motherboard socket, while the processor package features flat contact pads.
Differentiating LGA from PGA (Pin Grid Array) where pins are located directly on the CPU package.
2
Analyze phase-change cooling mechanisms for Vapor Chamber Cooling.
Vapor chambers operate via liquid evaporation and condensation within a sealed flat enclosure.
Distinguishing vapor chambers from standard heat pipes or liquid AIO loops based on their flat, planar enclosure design.
3
Determine the functional purpose of Thermal Interface Material (TIM).
Thermal paste fills microscopic gaps to remove trapped air between metal surfaces.
Air has low thermal conductivity, so eliminating gaps improves thermal transfer to the cooling unit.
4
Evaluate the architectural operation of Simultaneous Multithreading (SMT).
SMT splits a single physical core into two logical processors for parallel thread handling.
Increases instruction throughput without requiring extra physical CPU cores.

Anahtar Kavram

CPU Sockets, Cooling Solutions, and Multithreading Architectures
Soru 3320Soru →

An IT technician is deploying modern desktop workstations. Which TWO of the following features or capabilities are natively supported by the DisplayPort video interface standard?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Multi-Stream Transport (MST) for daisy-chaining multiple monitors from a single video output; Packet-based data transmission for carrying high-resolution video and audio data

Cevap

DisplayPort natively supports Multi-Stream Transport (MST) for display daisy-chaining and utilizes packet-based data transmission for video and audio signals.
DisplayPort natively supports Multi-Stream Transport (MST), enabling technicians to connect multiple displays in a daisy-chain configuration from a single host output port. Additionally, DisplayPort uses a packetized data structure, transmitting video and audio data in micro-packets across its main lanes.

Adım Adım Çözüm

1
Identify the primary architectural characteristics of DisplayPort.
DisplayPort operates using a packetized data structure (micro-packets) to transmit video and audio stream data efficiently.
Understanding the packet-based nature helps differentiate DisplayPort from traditional continuous clock raster video standards.
2
Evaluate multi-monitor topology capabilities inherent to DisplayPort.
DisplayPort 1.2 and later incorporate Multi-Stream Transport (MST) capability.
MST allows a single DisplayPort video output port to drive multiple independent displays connected in series (daisy-chained).

Anahtar Kavram

DisplayPort Standards and Capabilities
Tahmini Süre:1m 0s
ÖncekiSayfa 166 / 178Sonraki
Tüm alıştırma soruları — CompTIA A+ (Core 1 & Core 2) | Examkin