Hardware

445 soru

Tüm türler445 Çoktan seçmeli225 Çoklu seçim101 Sayısal6 Eşleştirme94 Sıralama19

Match each display cable or connector standard on the left with its defining physical or operational characteristic on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

DVI-D Dual-Link matches the 24-pin digital-only interface supporting resolutions up to 2560x1600. VGA (DB-15) matches the high-density 15-pin connector carrying purely analog RGB signals. DisplayPort matches the VESA royalty-free standard utilizing packet-based data transmission and optional latching pins. HDMI matches the proprietary digital video and audio interface featuring Audio Return Channel (ARC) capabilities.

Each display technology possesses distinct physical and signal characteristics: DVI-D Dual-Link provides digital-only video at high bandwidth via 24 pins; VGA (DB-15) is a legacy 15-pin analog RGB connection; DisplayPort is an open VESA packetized video standard with latching connectors; and HDMI is a consumer AV standard supporting integrated audio technologies like ARC.

Adım Adım Çözüm

Identify signal type and pin configuration for analog legacy interfaces.

VGA (DB-15) is identified as the 15-pin analog-only connector carrying RGB video.

VGA is the only purely analog display connector in the list.

Differentiate DVI variants based on signal capability and bandwidth.

DVI-D Dual-Link is identified as the 24-pin digital-only high bandwidth interface.

The '-D' suffix indicates digital-only, and Dual-Link provides the extra pins needed for 2560x1600 resolution.

Distinguish modern digital interfaces by architecture and proprietary features.

DisplayPort pairs with packet-based VESA standard featuring latching connectors, while HDMI pairs with consumer AV features like ARC.

DisplayPort relies on packet transmission (micro-packets) while HDMI includes consumer electronics features such as ARC and CEC.

Anahtar Kavram

Display standards vary by signal format (analog vs digital), pin count, packet architecture, and feature sets such as ARC or physical latching mechanisms.

Soru 142Soru →

Match each printer technology on the left with its primary maintenance consumable or key replacement component on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Thermal Transfer Printer matches with wax or resin coated heat-sensitive ribbon; Electrophotographic Laser Printer matches with high-temperature fuser roller assembly and fine polymer toner cartridge; Impact Printer matches with continuous fabric ribbon cassette soaked in ink and multi-part tractor-fed paper; Fused Filament Fabrication 3D Printer matches with thermoplastic filament spool and specially coated build plate tape.

Thermal transfer printing requires a wax or resin ribbon melted onto labels. Electrophotographic laser printers use toner cartridges along with fuser assemblies to bond toner to paper. Impact printers use ink-impregnated fabric ribbons struck by printhead pins. FFF 3D printers require thermoplastic filament spools extruded layer-by-layer.

Adım Adım Çözüm

Identify the print mechanism and consumable requirements for thermal transfer printing.

Thermal transfer relies on heating a wax/resin ribbon to transfer ink onto label stock.

Unlike direct thermal printers which use chemically treated paper, thermal transfer printers require a distinct ink ribbon.

Identify the core consumables and heat/pressure components of an EP laser printer.

Laser printing requires toner powder and a high-temperature fuser assembly.

The fuser assembly and toner cartridge are the primary replacement components for electrophotographic printing.

Match impact print heads to their mechanical ink delivery consumable.

Dot matrix printers strike pins against an ink-soaked fabric ribbon onto continuous forms.

Fabric ribbons supply ink during physical pin impact on multi-part forms.

Determine the raw material consumable and surface prep required for FFF 3D printing.

FFF 3D printing extrudes melted thermoplastic filaments like PLA or ABS onto a prepared build plate.

Spooled plastic filament is the primary material consumable for FFF 3D printers.

Anahtar Kavram

Matching major printer technologies (Thermal Transfer, EP Laser, Impact, 3D) to their specific consumables and maintenance hardware.

Soru 143Soru →

Match each expansion card slot or power supply connector to its primary specification and functional role within a PC build.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Each hardware interface correctly matches its standard operational specification: PCIe 6+2 pin supplies GPU auxiliary power up to 150 W, EPS12V supplies dedicated CPU power, PCIe x1 provides a single communication lane for smaller cards, and Molex 4-pin provides legacy peripheral power.

Each connector and expansion slot is paired with its precise voltage, wattage capacity, line configuration, or target target hardware component.

Adım Adım Çözüm

Analyze expansion card power connectors.

The PCIe 6+2 pin connector is designed for graphics cards requiring auxiliary power beyond the 75 W motherboard slot limit.

Combining the 6-pin block with 2 additional ground pins allows it to plug into an 8-pin PCIe power socket delivering up to 150 W.

Distinguish CPU supplemental power from PCIe power.

The EPS12V 8-pin connector plugs near the processor socket to feed power to the CPU voltage regulation module.

EPS12V uses a different keying and wiring pinout (+12V on top row, ground on bottom row) than PCIe 8-pin connectors.

Identify expansion slot throughput and legacy power standards.

PCIe x1 handles low-bandwidth expansion cards using a single lane, while Molex 4-pin supplies legacy +5V and +12V power to peripheral components.

Understanding slot lane counts and connector pinouts ensures proper hardware installation and power distribution.

Anahtar Kavram

Expansion card auxiliary power requirements and connector pinout standards

Soru 144Soru →

A field technician is preparing memory hardware for two different system deployments: a compact executive laptop and a standard tower workstation. The technician needs to verify form factor compatibility and dual-channel configuration rules prior to installation. Which of the following statements regarding memory module physical specifications and channel population rules are correct? Select TWO.

Geçerli olan tümünü seçin

Laptops and compact mobile devices require Small Outline Dual In-line Memory Modules (SO-DIMMs) due to smaller physical footprint constraints, whereas standard desktop tower motherboards require full-sized Dual In-line Memory Modules (DIMMs).

Standard full-sized DIMM modules can be installed into laptop expansion slots by attaching inline physical pin-adapter cards.

To enable dual-channel memory performance when installing two identical RAM modules on a four-slot desktop motherboard, the modules must be populated into designated matching channel slots (typically alternating slots).

Installing two matching RAM modules into adjacent physical slots on any four-slot motherboard guarantees dual-channel operation.

Cevabı ve açıklamayı göster

Cevap: Laptops and compact mobile devices require Small Outline Dual In-line Memory Modules (SO-DIMMs) due to smaller physical footprint constraints, whereas standard desktop tower motherboards require full-sized Dual In-line Memory Modules (DIMMs).; To enable dual-channel memory performance when installing two identical RAM modules on a four-slot desktop motherboard, the modules must be populated into designated matching channel slots (typically alternating slots).

Cevap

The correct statements are that compact mobile devices require SO-DIMM modules due to form factor constraints, while desktop motherboards use full-sized DIMMs; and that enabling dual-channel operation requires populating RAM into designated alternating channel slots according to motherboard specifications.

Laptops use SO-DIMMs due to enclosure size constraints, whereas desktop computers use full-sized DIMMs. Additionally, activating dual-channel memory mode requires populating memory sticks across designated channel slots (usually color-coded or alternating slots) as specified by motherboard manufacturers.

Adım Adım Çözüm

Evaluate memory module form factors for laptop versus desktop systems.

Laptops use SO-DIMM modules because they are approximately half the length of standard desktop DIMMs. Standard DIMMs cannot physically fit into laptops.

Form factor compatibility is determined by mechanical enclosure boundaries and slot pin configurations.

Evaluate dual-channel memory population guidelines on desktop motherboards.

Populating matching memory modules in designated alternating slots (e.g., Channel A Slot 1 and Channel B Slot 1) enables dual-channel memory throughput.

Installing modules into adjacent slots usually populates a single memory channel, causing the memory controller to operate in single-channel mode.

Anahtar Kavram

RAM Form Factors (DIMM vs. SO-DIMM) and Dual-Channel Memory Slot Population

Soru 145Soru →

A system administrator notices that a departmental printer regularly pulls several sheets of paper at once from the main tray, causing frequent jams near the intake path. The paper weight and tray guide settings have already been verified as correct. Which of the following components should be replaced to resolve this issue?

Separation pad

Imaging drum

Duplexing assembly

Registration roller

Cevabı ve açıklamayı göster

Cevap: Separation pad

Cevap

Separation pad

The separation pad works in conjunction with the pickup roller to maintain friction against the paper stack, allowing only one page to be pulled into the feed path at a time. When the pad becomes worn or smooth, it fails to hold back secondary sheets, causing multi-page feeding and paper jams.

Adım Adım Çözüm

Analyze the reported physical symptom

The printer is feeding multiple pages simultaneously from the tray.

Identifying multi-sheet feeding narrows the fault to friction mechanism components at the paper tray intake.

Evaluate component roles in paper feeding

The separation pad works alongside the pickup roller to restrain lower sheets while the top sheet is pulled into the printer path.

When the rubber surface of a separation pad wears smooth, it loses friction and allows multiple pages to slide into the feed path together.

Anahtar Kavram

Printer Feed Assembly and Consumable Maintenance

Soru 146Soru →

A technician is installing a replacement motherboard into a workstation case and preparing the system for first boot. Which of the following motherboard power connections must be secured to ensure the system board and processor receive proper power? (Select TWO.)

Geçerli olan tümünü seçin

The primary 24-pin ATX power connector to supply operational voltage to motherboard components and expansion buses.

An auxiliary 4-pin or 8-pin ATX12V/EPS12V connector to supply dedicated power directly to the CPU voltage regulator.

A 6+2 pin PCIe power connector plugged into the main system board power header.

A 15-pin SATA power connector plugged into the system board front-panel header.

Cevabı ve açıklamayı göster

Cevap: The primary 24-pin ATX power connector to supply operational voltage to motherboard components and expansion buses.; An auxiliary 4-pin or 8-pin ATX12V/EPS12V connector to supply dedicated power directly to the CPU voltage regulator.

Cevap

The correct connections are the primary 24-pin ATX power connector for overall motherboard circuitry and an auxiliary 4-pin or 8-pin ATX12V/EPS12V connector for dedicated CPU power.

Standard desktop motherboards require two main power supply connections to operate correctly: the primary 24-pin ATX main power cable, which powers motherboard logic and expansion slots, and the dedicated 4-pin or 8-pin ATX12V/EPS12V connector positioned near the CPU socket, which supplies isolated +12V power to the CPU voltage regulator.

Adım Adım Çözüm

Identify the primary power connector for the motherboard.

Connect the 24-pin ATX power connector from the power supply unit into the 24-pin motherboard socket.

This main connection routes +3.3V, +5V, and +12V power channels throughout the motherboard trace networks, chipset, and onboard slots.

Identify the dedicated power connector for the central processor.

Connect the auxiliary 4-pin or 8-pin ATX12V/EPS12V cable into the matching socket near the CPU socket.

Modern CPUs demand concentrated +12V current that cannot safely be delivered through the main 24-pin connector alone.

Anahtar Kavram

Motherboard Power Connectors (24-pin ATX and 4/8-pin EPS12V)

Soru 147Soru →

A technician is upgrading a desktop workstation used for video editing. The motherboard specifications state that it requires DDR4 Unbuffered DIMMs (UDIMMs). The technician attempts to install two 16 GB DDR4 Registered DIMM (RDIMM) modules retrieved from a retired enterprise server. Upon powering on the workstation, system fans turn on, but the computer fails to POST and displays no video output. Which of the following best explains why the system failed to boot?

Registered memory (RDIMMs) contains an onboard register buffer that is incompatible with desktop motherboards designed solely for unbuffered memory.

Registered memory modules utilize the compact SO-DIMM physical form factor, which prevents proper seating into full-sized desktop motherboard slots.

Installing two memory modules into adjacent slots automatically forces the motherboard memory controller to halt POST due to a dual-channel configuration error.

Registered RAM modules require an M.2 host bus controller slot rather than traditional DDR4 motherboard expansion slots.

Cevabı ve açıklamayı göster

Cevap: Registered memory (RDIMMs) contains an onboard register buffer that is incompatible with desktop motherboards designed solely for unbuffered memory.

Cevap

Registered memory (RDIMMs) contains an onboard register buffer that is incompatible with desktop motherboards designed solely for unbuffered memory.

Registered memory (RDIMM) incorporates an onboard register chip that buffers control and address signals to increase stability in high-density server environments. Standard desktop motherboards and consumer CPUs lack support for this register interface and require Unbuffered memory (UDIMM), causing the computer to fail POST when RDIMMs are installed.

Adım Adım Çözüm

Analyze motherboard memory specifications

The desktop motherboard explicitly specifies support for DDR4 Unbuffered DIMMs (UDIMMs).

Desktop motherboards rely on the CPU's integrated memory controller directly addressing memory chips without an intermediate buffer register.

Compare installed module characteristics (RDIMM vs UDIMM)

RDIMMs contain an extra register chip that buffers command and address signals between the memory controller and the DRAM chips.

This buffer reduces electrical loading in multi-slot server boards, but desktop chipsets cannot communicate through this register architecture.

Determine the root cause of the POST failure

The system cannot initialize RAM during POST due to hardware protocol incompatibility between the desktop chipset and the registered memory modules.

Incompatible memory architecture prevents successful system boot and Power-On Self-Test (POST).

Anahtar Kavram

UDIMM vs RDIMM Compatibility

Tahmini Süre:1m 0s

Soru 148Soru →

A desktop technician is sizing a power supply unit (PSU) for a 3D modeling workstation upgrade. The system features a CPU rated at $105\text{ W}$ TDP, a new workstation graphics card with a peak power consumption of $320\text{ W}$ , and internal peripherals (motherboard, RAM, liquid cooler, and storage drives) drawing a combined total of $95\text{ W}$ . Company policy mandates that the total estimated system power consumption must include an additional $25\%$ safety headroom margin to ensure long-term stability and prevent PSU overload. What minimum PSU wattage capacity should the technician select for this workstation?

650\text{ W}

520\text{ W}

550\text{ W}

400\text{ W}

Cevabı ve açıklamayı göster

Cevap: $650\text{ W}$

Cevap

The minimum recommended PSU wattage rating is

650\text{ W}

The total system power consumption is calculated by summing the CPU (

105\text{ W}

), GPU (

320\text{ W}

), and peripheral power draws (

95\text{ W}

), resulting in

520\text{ W}

. Incorporating the required

25\%

safety headroom margin (

520\text{ W} \times 1.25

) yields exactly

650\text{ W}

Adım Adım Çözüm

Calculate total base power consumption of all workstation components.

105\text{ W (CPU)} + 320\text{ W (GPU)} + 95\text{ W (Peripherals)} = 520\text{ W}

Accurate PSU sizing requires accounting for every component drawing power from the power supply.

Apply the

25\%

safety headroom margin to the total base wattage.

520\text{ W} \times 1.25 = 650\text{ W}

Adding a headroom margin prevents the PSU from running continuously at maximum capacity, reducing heat, noise, and power delivery failures.

Anahtar Kavram

Power supply unit (PSU) capacity sizing with safety headroom margins

Soru 149Soru →

An IT technician is configuring a dual-monitor workstation using a laptop equipped with a single USB Type-C port that supports DisplayPort Alternate Mode (DP Alt Mode), but lacks Thunderbolt certification. The technician intends to connect two 1080p external displays by daisy-chaining them using DisplayPort Multi-Stream Transport (MST). Which of the following requirements or features are necessary to successfully support this configuration? (Select TWO.)

Geçerli olan tümünü seçin

The primary monitor in the chain must feature a DisplayPort Output (DP-Out) port that supports Multi-Stream Transport.

The USB Type-C cable connecting the laptop to the primary display must explicitly support DisplayPort Alternate Mode video transmission.

An active Thunderbolt 4 host controller must be present on both monitors to negotiate multi-stream video routing over USB Type-C.

A single-link DVI-D cable must connect the primary and secondary monitors to transmit the required analog timing signals.

Cevabı ve açıklamayı göster

Cevap: The primary monitor in the chain must feature a DisplayPort Output (DP-Out) port that supports Multi-Stream Transport.; The USB Type-C cable connecting the laptop to the primary display must explicitly support DisplayPort Alternate Mode video transmission.

Cevap

The setup requires a USB Type-C connection supporting DisplayPort Alternate Mode from the laptop, and a primary monitor equipped with a DisplayPort Output (DP-Out) port that supports Multi-Stream Transport (MST).

DisplayPort Multi-Stream Transport (MST) enables daisy-chaining multiple monitors over a single video output. For this setup to function from a non-Thunderbolt USB-C laptop port, the host cable and port must support DisplayPort Alternate Mode to output the initial video data, and the first monitor must have an integrated DisplayPort Output (DP-Out) port supporting MST to pass the second display stream down the chain.

Adım Adım Çözüm

Identify host-to-display video requirements

Since the laptop uses a USB Type-C port without Thunderbolt, the connection must rely on DisplayPort Alternate Mode (DP Alt Mode) to carry video signals.

USB-C ports require DP Alt Mode support in both the port and the cable to output native DisplayPort video streams.

Identify daisy-chaining display hardware requirements

The primary display must receive the combined MST stream and route the secondary display stream out through a dedicated DisplayPort Output (DP-Out) port.

DisplayPort Multi-Stream Transport allows routing multiple distinct display signals down a single cable path, but requires DP-Out hardware on intermediary monitors.

Anahtar Kavram

DisplayPort Multi-Stream Transport (MST) and USB-C DisplayPort Alternate Mode

Soru 150Soru →

A field technician is auditing memory inventory for an upcoming hardware refresh across desktop workstations, portable devices, and network servers. Match each physical memory specification or characteristic on the left to its corresponding RAM type on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The correct matches are: 288-pin desktop module operating at

1.2\text{ V}

matches DDR4 Unbuffered DIMM; 262-pin small-outline module operating at

1.1\text{ V}

with PMIC matches DDR5 SODIMM; 260-pin small-outline module operating at

1.2\text{ V}

matches DDR4 SODIMM; and 288-pin module with

72\text{-bit}

bus width matches ECC Unbuffered DIMM.

Each RAM specification accurately reflects the physical pin count, operating voltage, form factor, and architecture of its respective memory technology. DDR4 desktop DIMMs use 288 pins at

1.2\text{ V}

, DDR4 laptop SODIMMs use 260 pins at

1.2\text{ V}

, DDR5 SODIMMs use 262 pins at

1.1\text{ V}

with an onboard PMIC, and ECC memory adds 8 error-checking bits to achieve a

72\text{-bit}

bus width.

Adım Adım Çözüm

Identify form factor pin counts and standard operating voltages for DDR4 desktop and laptop RAM

DDR4 desktop DIMMs have 288 pins (

1.2\text{ V}

), while DDR4 SODIMMs have 260 pins (

1.2\text{ V}

Physical pin counts and notch locations prevent installing mismatched RAM generations or form factors into incompatible slots.

Identify architectural updates in DDR5 memory modules

DDR5 SODIMMs use 262 pins, operate at

1.1\text{ V}

, and feature onboard Power Management Integrated Circuits (PMIC) instead of relying on motherboard power delivery.

DDR5 transfers power regulation control from the motherboard to the module itself to increase energy efficiency and signal integrity.

Analyze error checking characteristics

ECC memory modules add 8 extra error-checking bits, expanding the standard

64\text{-bit}

data path to a

72\text{-bit}

bus width.

The additional 8 bits allow the memory controller to detect multi-bit errors and correct single-bit memory corruption in real time.

Anahtar Kavram

RAM Form Factors, Generation Specifications, and Error Checking

Soru 151Soru →

A technician is building a compact desktop PC for a client using a standard Mini-ITX motherboard. The client requests that the build include both a dedicated dual-slot PCIe x16 graphics card and a separate PCIe x4 Wi-Fi adapter card. Which of the following physical characteristics of the Mini-ITX form factor will prevent the technician from fulfilling the client's request?

Mini-ITX motherboards are physically limited to a maximum of one PCIe expansion slot.

Mini-ITX motherboards only support M.2 storage interfaces and lack standard PCIe expansion capabilities.

Mini-ITX motherboards rely on a 20-pin power connector that cannot provide sufficient bus power for auxiliary cards.

Mini-ITX motherboards require riser cards that disable POST checks whenever multiple expansion slots are detected.

Cevabı ve açıklamayı göster

Cevap: Mini-ITX motherboards are physically limited to a maximum of one PCIe expansion slot.

Cevap

Mini-ITX motherboards are designed with a standard maximum of one expansion slot due to their compact 6.7 in x 6.7 in dimensions.

The Mini-ITX motherboard specification defines dimensions of 6.7 x 6.7 inches (170 x 170 mm) and restricts the board layout to a single expansion slot. Because the client requested two separate PCI Express add-in cards (a graphics card and a Wi-Fi card), the technician cannot install both directly onto a Mini-ITX system board.

Adım Adım Çözüm

Evaluate the physical specifications of the Mini-ITX form factor.

The Mini-ITX specification defines board dimensions of 170 mm x 170 mm (6.7 in x 6.7 in).

Understanding form factor dimensions explains physical layout limitations.

Determine slot expansion limits for Mini-ITX motherboards.

Due to space constraints on the PCB, Mini-ITX motherboards feature exactly one expansion slot (typically PCIe x16).

Adding a second expansion card requires a form factor with additional slot capacity, such as Micro-ATX (up to 4 slots) or standard ATX (up to 7 slots).

Anahtar Kavram

Mini-ITX Form Factor Specifications and Expansion Capabilities

Tahmini Süre:1m 0s

Soru 152Soru →

An IT technician is reviewing the internal electrophotographic (EP) printing cycle to troubleshoot a laser printer image quality issue. Place the following primary steps of the EP laser printing process in the correct chronological order from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence of the electrophotographic (EP) laser printing steps is: Charging, Exposing, Developing, Transferring, and Fusing.

The standard electrophotographic (EP) print process follows a strict 7-step cycle: Processing, Charging, Exposing, Developing, Transferring, Fusing, and Cleaning. In this scenario, Charging first prepares the photosensitive drum with a uniform negative charge. Exposing then uses the laser to write a latent image by discharging target areas. Developing coats those discharged areas with toner. Transferring pulls toner off the drum onto paper using a positive charge. Finally, Fusing applies heat and pressure to permanently bond the toner to the page.

Adım Adım Çözüm

Identify the initial drum conditioning phase.

Charging coats the photosensitive drum with a uniform high negative voltage (approx. -600V) using the primary charge roller (PCR).

The drum surface must be uniformly charged before the laser can write the latent image.

Determine how the latent image is written to the drum.

Exposing uses a laser light source to strike the rotating drum, discharging the illuminated areas to a much lower negative voltage (approx. -100V).

Discharging targeted spots creates an invisible electrostatic pattern where toner will attach.

Identify how toner is transferred to the drum pattern.

Developing uses a developer roller to attract negatively charged toner to the lower-voltage discharged areas on the drum.

The potential difference between the toner and the discharged areas allows toner to jump onto the drum.

Determine how toner moves from drum to media.

Transferring applies a strong positive charge to the back of the paper via the transfer roller, pulling negatively charged toner off the drum onto the paper.

Opposite electrical polarity attracts the toner powder onto the passing sheet of paper.

Identify how the image is permanently affixed.

Fusing passes the paper between a heated roller and a pressure roller, melting the plastic toner particles into the paper fibers.

Combined heat and physical pressure seal the toner so it cannot smudge or scrape off.

Anahtar Kavram

Electrophotographic (EP) Laser Printing Process Steps

Soru 153Soru →

A field technician is assembling a custom audio/video workstation. The system components have the following peak power requirements:

- Processor (CPU): $125\text{ W}$
- Dedicated Graphics Card (GPU): $285\text{ W}$
- PCIe Video Capture Card: $30\text{ W}$
- Motherboard, RAM, and cooling system: $70\text{ W}$
- Storage drives: $30\text{ W}$

To ensure stable operation and longevity, company policy specifies that the total power draw of all components must not exceed $80\%$ of the power supply unit's (PSU) rated continuous capacity.

What is the minimum rated capacity, in Watts ( $\text{W}$ ), required for the power supply unit?

Cevabı ve açıklamayı göster

Cevap: 675

Cevap

The minimum rated capacity required for the power supply unit is

675\text{ W}

The total system power consumption is calculated by summing the requirements of all individual hardware components (

125\text{ W} + 285\text{ W} + 30\text{ W} + 70\text{ W} + 30\text{ W} = 540\text{ W}

). To ensure the system power draw does not exceed

80\%

of the PSU rating, the total draw is divided by

0.80

, resulting in

\frac{540}{0.80} = 675\text{ W}

Adım Adım Çözüm

Calculate total peak power requirement of all workstation components.

125\text{ W} + 285\text{ W} + 30\text{ W} + 70\text{ W} + 30\text{ W} = 540\text{ W}

total power draw.

Before sizing a PSU, all component TDPs and peak power demands must be combined.

Calculate the minimum required PSU continuous wattage rating given the

80\%

load limit.

\frac{540\text{ W}}{0.80} = 675\text{ W}

Dividing the expected load by

0.80

ensures the power supply operates within its recommended continuous duty cycle without overloading.

Anahtar Kavram

Power supply sizing calculations including peak load headroom and maximum load percentages

Soru 154Soru →

A field technician is servicing a compact mobile laptop for a remote employee. Upon inspecting the system board, the technician notes that the motherboard requires a 260-pin memory module engineered specifically for space-constrained laptop enclosures. Which memory module form factor should the technician select for this installation?

Small Outline Dual Inline Memory Module (SO-DIMM)

Standard Dual Inline Memory Module (DIMM)

Registered Dual Inline Memory Module (RDIMM)

M.2 NVMe expansion card

Cevabı ve açıklamayı göster

Cevap: Small Outline Dual Inline Memory Module (SO-DIMM)

Cevap

Small Outline Dual Inline Memory Module (SO-DIMM)

Small Outline Dual Inline Memory Modules (SO-DIMMs) are designed specifically for laptops and compact systems where internal space is restricted. A 260-pin SO-DIMM is the standard module specification for DDR4 laptop RAM upgrades.

Adım Adım Çözüm

Analyze the hardware physical constraints from the scenario

The target computer is a compact laptop requiring high-density, reduced-size RAM.

Laptops use compact form factors due to limited internal chassis space.

Identify the matching pin count and memory form factor

DDR4 laptop memory utilizes a 260-pin SO-DIMM configuration.

SO-DIMMs measure approximately half the length of desktop DIMMs, making them standard for laptop systems.

Anahtar Kavram

RAM Form Factors (DIMM vs. SO-DIMM)

Soru 155Soru →

A desktop technician is deploying a dual-display workstation using a graphics card equipped with one DVI-I port and one DVI-D port. The technician attempts to connect two analog VGA monitors using identical passive DVI-to-VGA adapters. The monitor connected to the DVI-I port displays video correctly, but the monitor connected to the DVI-D port displays no signal. Which of the following best explains why the second monitor fails to display video?

The DVI-D port carries digital signals exclusively and lacks the analog pins necessary for a passive adapter to output video to a VGA monitor.

The DVI-D port requires a Thunderbolt Alt Mode controller to negotiate analog display handshakes with legacy VGA monitors.

Driving two analog monitors simultaneously exceeds the total video bandwidth of standard DVI graphics controllers.

Passive DVI adapters automatically convert analog signals to digital, causing the DVI-D port to disable its output signal to protect display hardware.

Cevabı ve açıklamayı göster

Cevap: The DVI-D port carries digital signals exclusively and lacks the analog pins necessary for a passive adapter to output video to a VGA monitor.

Cevap

The DVI-D port carries digital signals exclusively and lacks the analog pins necessary for a passive adapter to output video to a VGA monitor.

DVI-I (Integrated) carries both digital and analog signals, allowing a simple passive adapter to pass analog video to a VGA monitor. DVI-D (Digital) carries digital signals only and lacks the physical analog pin sockets, making passive DVI-to-VGA adapters ineffective without an active digital-to-analog converter (DAC).

Adım Adım Çözüm

Identify the signal requirements of the display device.

The target display is a legacy VGA monitor, which requires an analog RGBHV video signal.

VGA (DB-15) is a strictly analog video interface standard.

Compare the capabilities of DVI-I versus DVI-D interfaces.

DVI-I (Integrated) supports both analog and digital output, whereas DVI-D (Digital) supports digital output only.

DVI-I includes four extra pin sockets surrounding the flat blade connector to carry analog color signals.

Evaluate the functionality of passive adapters.

Passive adapters only re-route existing pins and cannot actively convert a digital signal into an analog signal.

Because DVI-D does not output analog signals, a passive adapter provides no signal to the VGA cable. An active converter powered by an external or bus source would be required.

Anahtar Kavram

DVI Interface Variants and Signal Compatibility (DVI-I vs DVI-D)

Soru 156Soru →

A technician is installing motherboard power cables and chassis front-panel header connections during a custom workstation assembly. Match each motherboard connector or header to its primary function or operational characteristic.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The 24-pin ATX power connector matches with supplying main system power across multiple voltage rails; the 8-pin EPS12V power connector matches with delivering dedicated +12V power to the CPU voltage regulator modules; the Front panel HDD LED header matches with requiring strict polarity orientation for storage activity illumination; and the 19-pin internal USB header matches with providing bus connectivity for front-panel USB 3.0 ports.

Each connector serves a distinct hardware purpose: the 24-pin ATX connector supplies main logic and bus power across multiple voltage rails; the 8-pin EPS12V connector supplies dedicated +12V power directly to CPU voltage regulators; the HDD LED header requires proper positive/negative polarity alignment to indicate storage activity; and the 19-pin internal USB header routes high-speed data signals to front-panel USB 3.0 ports.

Adım Adım Çözüm

Identify the primary power delivery connector for general motherboard operation.

The 24-pin ATX power connector supplies primary system power (+3.3V, +5V, +12V) to the motherboard logic and expansion slots.

The P1 24-pin cable is the main power umbilical cable from the power supply unit to the motherboard.

Determine the auxiliary connector used specifically for modern CPU power delivery.

The 8-pin EPS12V cable connects near the CPU socket to power the processor voltage regulation circuitry.

Modern CPUs demand substantial power, necessitating dedicated +12V supply lines direct from the PSU.

Analyze front-panel pin header connectivity requirements for system status indicators.

The HDD LED connector requires proper anode (+)/cathode (-) pin alignment to function.

Unlike non-polarized momentary switches (power/reset switches), Light-Emitting Diodes only pass current and illuminate when correctly polarized.

Match internal motherboard headers to chassis peripheral port connectivity.

The 19-pin internal USB header connects to chassis front USB 3.0 / 3.2 Gen 1 ports.

Motherboards feature a standardized 19-pin keyed connector block to route super-speed USB data channels to front-panel ports.

Anahtar Kavram

Motherboard Power Connectors and Chassis Header Functions

Tahmini Süre:1m 30s

Soru 157Soru →

An IT technician is specifying a replacement power supply unit (PSU) for a CAD workstation upgrade. The system components have the following rated maximum power requirements: CPU at $105\text{ W}$ , graphics card at $225\text{ W}$ , and remaining motherboard components, storage drives, and cooling fans at $70\text{ W}$ combined. To ensure operational stability and system longevity, company policy requires a minimum power safety headroom margin of $25\%$ above the total peak power draw. Which of the following is the minimum power supply wattage rating the technician should select to meet this requirement?

500\text{ W}

400\text{ W}

330\text{ W}

225\text{ W}

Cevabı ve açıklamayı göster

Cevap: $500\text{ W}$

Cevap

500\text{ W}

is the minimum required rating to safely power the system with a

25\%

safety margin.

The total system power consumption under load is calculated as

105\text{ W} + 225\text{ W} + 70\text{ W} = 400\text{ W}

. Applying the required

25\%

safety margin (

400\text{ W} \times 1.25

) yields

500\text{ W}

, which ensures reliable system operation without exceeding safe load thresholds.

Adım Adım Çözüm

Calculate the total peak system power consumption by summing individual component wattages.

105\text{ W} \text{ (CPU)} + 225\text{ W} \text{ (GPU)} + 70\text{ W} \text{ (Peripherals/Motherboard)} = 400\text{ W}

Power supply sizing must account for all connected system hardware under full load.

Apply the

25\%

safety headroom buffer requirement to the calculated total peak draw.

400\text{ W} \times 1.25 = 500\text{ W}

Adding headroom prevents PSU overload during transient power spikes and maintains efficient operation.

Anahtar Kavram

Calculating Power Supply Unit Wattage and Safety Headroom Margins

Soru 158Soru →

An IT support technician is troubleshooting a departmental laser printer that produces output pages with extremely faint text and images across the entire sheet. Replacing the toner cartridge with a new manufacturer-approved unit does not resolve the issue. Diagnostic tests confirm that the fuser assembly is reaching full operating temperature and the imaging drum is taking a uniform charge. Which of the following components is most likely defective and failing to draw toner from the imaging drum onto the paper?

Transfer roller

Fuser assembly

Primary charge roller

Pickup roller

Cevabı ve açıklamayı göster

Cevap: Transfer roller

Cevap

Transfer roller

During the Transfer step of the electrophotographic printing process, the transfer roller applies a high positive electrical charge to the back of the paper as it passes between the drum and roller. This positive potential attracts the negatively charged toner particles away from the drum and onto the paper surface. When the transfer roller wears out or loses its electrical conductivity, insufficient charge is applied, causing only a fraction of the toner to move to the paper, which results in faint images across the entire sheet.

Adım Adım Çözüm

Analyze the reported symptom and verified conditions

Toner cartridge is new, fuser temperature is normal, drum charge is functional, but print output is faint across the entire page.

Eliminates toner exhaustion, fuser heating failures, and drum conditioning defects.

Identify the electrophotographic (EP) printing step responsible for pulling toner onto the paper

The Transfer step uses high voltage to attract toner from the photosensitive drum onto the media.

Toner must be electrostatically pulled from the drum surface onto the paper as it moves through the print path.

Determine the component responsible for the Transfer step

The transfer roller charges the back of the paper positively to attract negatively charged toner off the drum.

A degraded or faulty transfer roller reduces the electrostatic attraction force, causing faint or light prints.

Anahtar Kavram

Electrophotographic (EP) Printing Process - Transfer Stage and Component Function

Tahmini Süre:1m 15s

Soru 159Soru →

An IT technician is organizing cable inventory for client workstation deployments. Match each display connector standard on the left with its defining physical or operational characteristic on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

DVI-I Dual-Link matches the 24-pin grid plus 4-pin analog signal capability; Mini DisplayPort matches the physical form factor of Thunderbolt 1/2; HDMI 2.1 matches Fixed Rate Link (FRL) 48 Gbps bandwidth; DB-15 (VGA) matches the 15-pin analog RGBHV transmission.

Each display standard has unique physical pin designs and signaling limits: DVI-I integrates 4 analog pins for dual-mode operation; Mini DisplayPort shares the physical footprint of original Thunderbolt ports; HDMI 2.1 utilizes FRL for 48 Gbps bandwidth; and DB-15 (VGA) uses a 15-pin 3-row layout for analog video.

Adım Adım Çözüm

Identify signal type and pin layout for DVI standards.

DVI-I contains integrated analog pins surrounding the flat ground blade in addition to the digital pin grid.

DVI-D carries digital only, while DVI-I carries both digital and analog signals.

Compare physical port backward-compatibility across compact display interfaces.

Mini DisplayPort connectors physically plug into and share pin assignments with Apple/Intel Thunderbolt 1 and 2 ports.

Thunderbolt 1/2 adopted the Mini DisplayPort mechanical spec.

Evaluate modern HDMI bandwidth specifications.

HDMI 2.1 replaces TMDS with FRL to achieve 48 Gbps throughput.

FRL is required to drive uncompressed 8K at 60Hz or 4K at 120Hz.

Identify legacy analog video interfaces.

DB-15 (HD-15/DE-15) is the classic 15-pin 3-row VGA connector transmitting analog signals.

VGA does not support digital video signals natively.

Anahtar Kavram

Physical pin layouts, signal modes (analog vs. digital), and bandwidth capacities of video cables.

Soru 160Soru →

A technician is performing a memory upgrade on a desktop workstation motherboard that features four physical memory expansion slots labeled Slot 1 through Slot 4 across two memory channels. The technician has two identical DDR4 RAM modules to install. Which of the following steps and specifications must the technician follow to complete the installation correctly? (Select TWO.)

Geçerli olan tümünü seçin

Install the modules into designated alternating slots (such as Slot 1 and Slot 3) to enable dual-channel memory architecture.

Ensure the physical key notch on each 288-pin DIMM aligns strictly with the break in the motherboard slot before seating the module.

Populate adjacent slots (such as Slot 1 and Slot 2) to fill Channel A completely before placing memory into Channel B.

Select 260-pin SO-DIMM modules to fit standard full-sized desktop ATX motherboard expansion slots.

Cevabı ve açıklamayı göster

Cevap: Install the modules into designated alternating slots (such as Slot 1 and Slot 3) to enable dual-channel memory architecture.; Ensure the physical key notch on each 288-pin DIMM aligns strictly with the break in the motherboard slot before seating the module.

Cevap

The technician must install the modules into designated alternating slots to enable dual-channel mode and align the physical key notch on each 288-pin DIMM module with the motherboard slot key.

Dual-channel memory performance requires installing matching RAM sticks into designated alternating slots to engage both memory channels simultaneously. Standard desktop DDR4 motherboards accept 288-pin DIMMs, which feature a keyed notch off-center to guarantee proper physical orientation during installation.

Adım Adım Çözüm

Determine slot configuration for multi-channel operation.

Identify alternating motherboard slots (e.g., Slot 1 and Slot 3) tied to separate memory channels.

Populating both channels enables dual-channel memory performance.

Verify memory form factor and notch orientation.

Confirm 288-pin DIMM form factor for desktop motherboards and align the notch correctly.

Proper notch alignment prevents physical damage to the module and slot pins.

Anahtar Kavram

RAM Form Factors and Dual-Channel Slot Population Rules

Tahmini Süre:1m 30s

ÖncekiSayfa 8 / 23Sonraki

Hardware

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram