Networking Concepts
538 soru
A network administrator is configuring network firewall policies and establishing service baselines. Match each protocol on the left with its default port number, transport layer protocol, and primary operational function on the right.
Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın
Öğeler
Eşleşmeler
A network engineer is configuring an interface on a core router with the IP address . What is the broadcast address for this IPv4 subnet?
During a security audit, a network analyst identifies unencrypted directory query traffic originating from an internal application server to a domain controller over TCP port 389. To secure these identity lookup requests with TLS encryption, which protocol and default port combination must be permitted through the internal firewall?
A network administrator is provisioning network core services across multiple VLANs in a enterprise campus network. Centralized infrastructure services, including DHCP and DNS, reside on VLAN 10 (), whereas user client workstations reside on VLAN 20 () and VLAN 30 (). Which TWO of the following configuration steps must be implemented to ensure client hosts on remote VLANs can automatically acquire network configuration settings and properly resolve internal hostnames to dual-stack IPv6 resources? (Select TWO)
Geçerli olan tümünü seçin
A network engineer is provisioning subnets from the assigned address block using Variable Length Subnet Masking (VLSM). The subnets must be allocated sequentially starting from the lowest available IP address in the block to satisfy the following departmental requirements in descending order of size:
- Development: usable host IP addresses
- Sales: usable host IP addresses
- Support: usable host IP addresses
- Management: usable host IP addresses
After provisioning these four subnets with the smallest valid prefix length for each requirement, what is the decimal value of the fourth octet of the last usable host IP address in the Management department's subnet?
A network technician needs to document an interface IPv6 address using standard shorthand syntax. Which of the following is the correct representation of the address 2001:0db8:0000:0000:0000:0000:0000:0001 after applying leading zero suppression and zero compression rules?
A network administrator is deploying a high-frequency sensor telemetry service that transmits small status updates every 10 milliseconds. The system prioritizes minimal transmission overhead and low latency over guaranteed packet delivery, as occasional lost datagrams do not impact real-time monitoring. Which transport layer protocol best aligns with these application requirements?
A network technician is monitoring traffic on a local network segment and observes data organized into frames containing physical MAC addresses for node-to-node delivery. At which layer of the OSI model does this hardware addressing and framing occur?
A network engineer is auditing IPv6 static route configurations on a core dual-stack router. During the review, the engineer identifies several shorthand IPv6 address representations. Which of the following IPv6 address representations is syntactically invalid?
A network technician is configuring a local web server to host internal documentation. The application requires guaranteed delivery of data, sequence tracking, and acknowledgement of received packets. Which Transport layer protocol provides this connection-oriented service?
Match each OSI model layer to its primary network responsibility.
Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın
Öğeler
Eşleşmeler
A network administrator is configuring a real-time voice streaming service for an office network. The application requires minimal protocol overhead and low latency, and it can tolerate minor packet loss without requiring retransmissions. Which transport layer protocol is best suited for this application?
Match each transport protocol mechanism on the left with its corresponding connection-oriented or connectionless operational characteristic on the right.
Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın
Öğeler
Eşleşmeler
Match each network operation scenario to the specific OSI model layer responsible for performing that function.
Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın
Öğeler
Eşleşmeler
A senior network engineer is analyzing edge-case operational characteristics of transport-layer protocols during abnormal network state events. Match each connection-oriented or connectionless protocol scenario on the left with its corresponding transport-layer mechanism or operational consequence on the right.
Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın
Öğeler
Eşleşmeler
A network administrator is documenting IPv6 address assignments across corporate router interfaces. Which of the following IPv6 addresses represents an INVALID shorthand notation because it violates IPv6 address compression rules?
A network security analyst is reviewing a packet capture from a custom enterprise application. The analyst notes that during initial connection setup, the client and server negotiate cryptographic cipher suites, compress data payloads to optimize bandwidth, and convert binary structures into standard ASCII syntax before passing the payload down the protocol stack. Which layer of the OSI reference model is directly responsible for executing these data translation, formatting, and encryption functions?
An organization deploys thousands of remote edge devices that transmit brief, 64-byte heartbeat status updates every second across a high-latency, limited-bandwidth satellite network. The network administrator observes that stateful firewall session tables at the central hub are constantly saturating due to session tracking overhead, while high link latency causes excessive control packet accumulation. To resolve these operational constraints without upgrading hardware, the administrator plans to adjust the application transport layer architecture. Which of the following transport protocol selections and technical justifications best resolves both issues?
A network technician is reviewing transport layer protocols to determine their functional differences. Which of the following characteristics are specific to connection-oriented protocols such as TCP, rather than connectionless protocols such as UDP? (SELECT TWO)
Geçerli olan tümünü seçin
A network administrator is conducting a packet capture analysis to troubleshoot performance variations between a legacy database synchronization utility and a newly deployed real-time voice conferencing application. The analysis reveals distinct transport-layer operational characteristics between the two streams. Which of the following statements accurately contrast connection-oriented and connectionless transport-layer protocols in this environment? (SELECT TWO)
Geçerli olan tümünü seçin