Examkin

Tüm alıştırma soruları

631 soru

Tüm türler13,931Çoktan seçmeli7,139Doğru / Yanlış771Sayısal1,526Eşleştirme2,583Sıralama631Boşluk doldurma1,223Kısa cevap58
Soru 201Soru →

In Southeastern Nigeria, gully erosion poses a severe environmental hazard. What is the correct sequential order of the stages in the development of a gully, from initial land disturbance to catastrophic collapse?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with vegetation removal, followed by surface runoff forming micro-rills, which deepen into incised gullies, and culminates in massive sidewall collapse and severe structural land loss.
The erosion process follows a logical morpho-dynamic progression: human or natural land clearing first removes protective vegetation, allowing concentrated surface runoff to carve rills. Continuous concentrated water flow deepens these rills into gullies, which eventually undergo mass failure and sidewall slumping due to basal under-cutting and sub-surface seepage.

Adım Adım Çözüm

1
Identify the primary trigger initiating soil exposure.
Land clearing and deforestation remove protective plant cover.
Without plant canopy and roots, soil aggregates break down easily under rain impact.
2
Trace the initial runoff response on bare soil slopes.
Surface runoff gathers momentum and carves small rills.
Water flows downhill along paths of least resistance, detaching topsoil particles.
3
Examine channel deepening under continuous rainfall.
Rills expand vertically and laterally into deep gullies.
Concentrated volume and velocity of water enhance hydraulic scouring along the channel floor.
4
Determine the final stage of structural collapse.
Under-cutting and seepage cause massive gully wall collapse.
Basal erosion and groundwater piping destabilize side slopes, triggering gravitational slumping.

Anahtar Kavram

Stages of Gully Erosion Process
Tahmini Süre:1m 15s
Soru 202Soru →

According to Von Thünen's model of agricultural location, land use intensity and spatial arrangement around a central market are governed by land rent and transportation costs per unit weight. Arrange the following agricultural land-use activities in sequence from the innermost zone (closest to the market center) to the outermost zone (furthest from the market center).

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct spatial sequence from innermost zone to outermost zone is: (1) Intensive market gardening and commercial dairying, (2) Forestry and fuelwood production, (3) Intensive field crop farming without fallow periods, and (4) Extensive livestock grazing and ranching.
In Von Thünen's model, land rent decreases with distance from the market center while transportation costs increase. Intensive market gardening and dairying generate high economic rent and produce perishable goods, placing them in Zone 1. Forestry occupies Zone 2 because heavy firewood and timber incur extreme freight costs per mile. Intensive crop farming occupies Zone 3 on moderately priced land. Extensive livestock grazing requires vast land areas with low economic rent, placing it in the outermost zone (Zone 4).

Adım Adım Çözüm

1
Analyze economic rent and transport cost principles in spatial agricultural distribution.
Activities producing highly perishable goods or having high yield value per unit area occupy land closest to the central city.
Proximity minimizes spoilage and maximizes economic return where land rent is highest.
2
Assign the most perishable and intensive farming system to Zone 1.
Intensive market gardening and dairying occupy the innermost ring.
Fresh vegetables and fluid milk require immediate urban access.
3
Determine the placement of heavy, high-bulk commodities.
Forestry and fuelwood occupy Zone 2.
In pre-industrial/classic economic models, wood transport costs are extremely high due to heavy bulk.
4
Sequence arable crop cultivation and extensive animal production based on land rent tolerance.
Crop farming without fallow occupies Zone 3, while extensive livestock grazing occupies Zone 4.
Livestock grazing requires vast areas of cheap land where economic rent is lowest, and livestock can walk to market.

Anahtar Kavram

Von Thünen's Agricultural Location Theory
Tahmini Süre:2m 0s
Soru 203Soru →

In regions prone to severe land degradation, such as Southeastern Nigeria, water erosion progresses through distinct mechanical stages. Arrange the following stages of water-induced soil erosion in the correct sequence from the initial raindrop impact to the final advanced landscape destruction.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order of water erosion stages is: Raindrop impact dislodging soil aggregates (Splash erosion) → Removal of a thin, uniform surface layer of soil by unchanneled runoff (Sheet erosion) → Formation of small, narrow micro-channels in the soil by concentrated flow (Rill erosion) → Carving of deep, steep-sided trenches that permanently alter the landscape (Gully erosion).
Soil erosion by water follows a progressive sequence: splash erosion dislodges fine particles upon raindrop impact; sheet erosion strips a thin layer of topsoil via unchanneled surface runoff; rill erosion forms small, scour-cut channels as runoff concentrates; and gully erosion represents the mature, catastrophic deepening of these channels into un-tillable ravines.

Adım Adım Çözüm

1
Identify the initial physical trigger of water-induced erosion.
Raindrop impact dislodges soil aggregates through splash erosion.
Kinetic energy breaks down surface soil structural stability before water accumulates as surface runoff.
2
Determine the effect of unchanneled overland surface flow.
Sheet erosion strips a thin, uniform topsoil layer across the slope.
Water flows as a continuous thin film across smooth ground prior to concentrating into channels.
3
Trace the consequence of runoff concentrating into micro-pathways.
Rill erosion creates shallow micro-channels.
Increased hydraulic volume and shear stress cut temporary miniature channels into the ground.
4
Identify the terminal stage of severe water erosion channel expansion.
Gully erosion carves deep, broad trenches and ravines.
Rills expand through continuous scouring, side-wall slumping, and headward erosion into massive relief features.

Anahtar Kavram

Progressive Morphological Stages of Water Erosion
Soru 204Soru →

In transport geography, different modes of transportation exhibit distinct capital cost structures for terminal construction and maintenance. Arrange the following transportation modes in sequence from HIGHEST terminal costs to LOWEST terminal costs.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from highest terminal costs to lowest terminal costs is Air Transport, Water Transport, Rail Transport, and Road Transport.
Air transport incurs the highest terminal costs because airports require huge land areas, specialized high-strength runways, advanced navigation and control systems, and extensive passenger/cargo terminals. Water transport follows, as modern container ports require immense capital for harbor dredging, docks, piers, and heavy cargo-handling cranes. Rail transport ranks third, requiring dedicated freight marshalling yards and passenger stations. Road transport has the lowest terminal costs since vehicles can load and unload at simple depots, warehouses, or curbsides with minimal specialized terminal investment.

Adım Adım Çözüm

1
Identify the high-capital terminal requirements of air and maritime transport.
Air transport stands at the top due to sophisticated technological, safety, and runway infrastructure, followed by water transport which requires extensive harbor dredging, dockyards, and container handling machinery.
Both air and water modes depend on complex, centralized nodes (airports and seaports) to operate.
2
Evaluate the terminal infrastructure requirements for land-based modes (rail and road).
Rail terminals require specialized freight yards and switching facilities, making their cost higher than road transport, which uses basic depots and flexible curbside spaces.
Road transport has high line-haul flexibility and minimal fixed terminal requirements compared to rail.
3
Arrange the modes in descending order of terminal expenditure.
Air Transport → Water Transport → Rail Transport → Road Transport.
This reflects the progression from most specialized and expensive fixed terminal facilities to the least specialized.

Anahtar Kavram

Terminal Cost Hierarchy in Transportation Geography
Soru 205Soru →

Arrange the following geographic features and major infrastructure projects along the course of the Zambezi River in sequential order from its source to its ocean outlet.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequential order of the Zambezi River course from source to mouth is: Origin at Kalene Hill →\rightarrow Plunge over Victoria Falls →\rightarrow Impoundment at Kariba Dam →\rightarrow Impoundment at Cahora Bassa Dam →\rightarrow Discharge into the Mozambique Channel.
The Zambezi River flows generally eastward across Southern Africa. It originates at Kalene Hill in northwestern Zambia, proceeds south and east over Victoria Falls, flows into the artificial Lake Kariba created by Kariba Dam, continues east into Mozambique where it is impounded at Cahora Bassa Dam, and finally drains into the Mozambique Channel of the Indian Ocean.

Adım Adım Çözüm

1
Identify the upper headwaters of the Zambezi River.
The river originates in the Zambian highlands at Kalene Hill (Mwinilunga District).
Every river course sequence begins at its highland source.
2
Locate the primary natural waterfall barrier along the upper-middle river section.
The river flows southward and eastward to plunge over Victoria Falls along the Zambia–Zimbabwe border.
Victoria Falls precedes any major reservoir downstream.
3
Determine the sequence of major man-made hydroelectric reservoirs (Kariba vs. Cahora Bassa).
The river enters Lake Kariba (Kariba Dam) first, then flows eastward across the border into Mozambique to feed Lake Cahora Bassa (Cahora Bassa Dam).
Kariba Dam lies further west (upstream) on the Zambia–Zimbabwe border, while Cahora Bassa Dam lies further east (downstream) in Mozambique.
4
Identify the final marine discharge outlet.
The river empties through its extensive delta into the Mozambique Channel (Indian Ocean).
The marine outlet represents the terminal mouth of the river system.

Anahtar Kavram

Course, Geomorphology, and Hydroelectric Infrastructure of the Zambezi River Basin
Tahmini Süre:2m 0s
Soru 206Soru →

In the Niger Delta region of Nigeria, managing oil spill hazards requires a systematic environmental response protocol. In what sequential order should the following steps be carried out from first to last?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with immediate physical containment using booms, followed by statutory damage inspection (Joint Investigation Visit), then bulk surface oil recovery, and finishes with long-term ecological restoration via bioremediation.
Effective environmental hazard management follows a logical progression: emergency containment prevents spatial expansion, statutory joint inspection evaluates the damage and cause, physical recovery removes mass contaminants, and biological remediation restores ecological stability.

Adım Adım Çözüm

1
Identify the immediate containment action
Deploying physical containment barriers (booms) is the first step.
Immediate containment stops the crude oil from spreading further into river channels, farmlands, and sensitive mangrove ecosystems.
2
Identify the statutory assessment phase
Conducting a Joint Investigation Visit (JIV) comes second.
Environmental regulations in Nigeria require a multi-stakeholder inspection to document the cause, legal liability, and volume of the spill before full cleanup commences.
3
Identify the primary cleanup operation
Skimming and recovering free-phase crude oil is the third step.
Removing heavy surface oil prevents toxic buildup and clears the way for deeper soil treatment.
4
Identify the final ecosystem restoration step
Applying long-term bioremediation techniques is the fourth and final step.
Biological treatment breaks down lingering hydrocarbon molecules to gradually rehabilitate degraded land and water quality over time.

Anahtar Kavram

Oil Spill Management Protocol and Environmental Remediation in Nigeria
Soru 207Soru →

A soil scientist conducts a field transect across Nigeria, traveling along a direct line of longitude from the southern coast along the Gulf of Guinea up to the northern boundary with Niger Republic. Arrange the following major soil groups in the precise sequential order in which they are encountered from South to North.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct South-to-North sequence begins with coastal Hydromorphic soils, followed by rainforest Ferrallitic soils, middle-belt Ferruginous tropical soils, and ends with northern semi-arid Regosols/brown soils.
The latitudinal gradient of climate and vegetation across Nigeria directly controls soil formation from south to north. The sequence starts at the Atlantic coast with waterlogged Hydromorphic soils, transitions to heavily leached Ferrallitic soils under the southern rainforest, moves into seasonally dry Ferruginous tropical soils in the Guinea Savanna, and concludes at the northern arid border with wind-deposited Regosols and brown soils.

Adım Adım Çözüm

1
Identify coastal low-latitude soil belt (4°–6°N)
The southernmost zone consists of waterlogged deltaic and mangrove environments giving rise to Hydromorphic soils.
High water tables and tidal inundation at the coast prevent profile differentiation and produce gleys and alluvial deposits.
2
Identify humid rainforest soil belt (5°–8°N)
Moving inland, heavy precipitation causes intense leaching resulting in deeply weathered Ferrallitic soils (Acid Sands).
Abundant rainfall removes soluble bases, leaving iron and aluminum oxides in the subsoil.
3
Identify sub-humid savanna soil belt (8°–11°N)
In the Middle Belt, seasonal wet-dry savanna conditions foster Ferruginous tropical soils over crystalline rocks.
Moderate leaching with distinct dry seasons causes iron accumulation and plinthite/laterite layer formation.
4
Identify semi-arid northern soil belt (11°–14°N)
At the northern border, scanty rainfall and wind action yield sandy Regosols and brown soils derived from desert drift.
Harmattan winds bring aeolian sand deposits where chemical weathering is minimal due to low precipitation.

Anahtar Kavram

Latitudinal Zonal Soil Distribution in Nigeria
Soru 208Soru →

Arrange the following major Nigerian soil types in sequential order from the semi-arid northern border down to the southern Atlantic coastline.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequential order from north to south is: Regosols and Brown soils of the northern semi-arid zone, Ferruginous tropical soils of the central savanna belt, Ferrallitic red soils of the southern rainforest belt, and Hydromorphic and alluvial soils of the coastal delta.
The geographical transect across Nigeria from north to south follows a gradient of increasing annual rainfall and vegetative cover. Starting at the northern border, thin Regosols and Brown soils predominate under semi-arid conditions. Moving south into the central Guinea savanna, Ferruginous tropical soils develop over crystalline rocks. Further south in the humid rainforest belt, high rainfall causes deep leaching to form Ferrallitic red soils. Finally, at the extreme south along the Atlantic coastline and Niger Delta, permanently wet conditions create Hydromorphic and alluvial swamp soils.

Adım Adım Çözüm

1
Identify the northernmost soil zone near the border with Niger Republic.
Regosols and Brown soils occur in the far north due to low annual rainfall and sparse vegetation.
Extreme northern Nigeria experiences semi-arid conditions that produce shallow, sandy soils.
2
Identify the middle belt soil zone south of the northern semi-arid zone.
Ferruginous tropical soils dominate the central savanna region.
Moderate rainfall and seasonal wetting/drying cycles in the savanna lead to iron oxide accumulation in central Nigeria.
3
Determine the soil zone covering the southern interior forest belt.
Ferrallitic red soils (Latosols) occupy the high-rainfall southern forest belt.
High temperature and heavy precipitation promote intense chemical weathering and leaching in southern rainforests.
4
Identify the southernmost coastal soil zone.
Hydromorphic and alluvial soils form along the coastal belt and Niger Delta.
River deposition and ocean inundation create swampy, poorly drained soils along the Atlantic coast.

Anahtar Kavram

Zonal distribution of Nigerian soils from north to south
Soru 209Soru →

Pedogenesis involves progressive biochemical and physical alterations of parent material over extended periods. Which sequence correctly places the following stages of soil development in chronological order, from initial bedrock weathering to the establishment of a mature zonal soil profile?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct chronological sequence of soil formation is: bedrock breakdown into regolith, pioneer organism colonization and humification, topsoil eluviation, subsoil illuviation, and final zonal profile stabilization.
The correct sequence follows the natural progression of soil development: primary weathering creates parent regolith, biological colonization adds organic material, downward percolating water removes fine minerals via eluviation, these leached materials accumulate in the subsoil via illuviation, and sustained pedogenic action produces a mature zonal profile with distinct horizons.

Adım Adım Çözüm

1
Identify the initial physical process required before soil development can begin
Weathering of solid parent bedrock into loose mineral regolith occurs first.
Soil cannot form without a substrate of loose mineral matter derived from parent rock disaggregation.
2
Determine the role of biological inputs in soil maturation
Pioneer organisms colonize the regolith, producing organic humus.
Humification transforms bare mineral regolith into a true soil substrate capable of supporting distinct horizons.
3
Trace the movement of water and materials through the developing profile
Eluviation leaches fine clays and soluble materials downward from the topsoil, followed by illuviation where these materials accumulate in the subsoil.
Eluviation (removal) must precede illuviation (deposition) in the chronological sequence of horizon differentiation.
4
Identify the final equilibrium state of pedogenesis
A mature zonal soil profile with stable O, A, E, B, and C horizons is established.
Horizonation reaches equilibrium over long periods under stable climatic and vegetation conditions.

Anahtar Kavram

Chronological stages of pedogenesis and soil profile differentiation
Soru 210Soru →

Arrange the following sequential stages in the retreat of a waterfall and the subsequent formation of a river gorge, from the initial bedrock arrangement to the final landscape feature.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order of stages in waterfall retreat and gorge formation begins with a river flowing over hard rock overlying soft rock, followed by undercutting of the softer rock to form an overhang, then collapse of the unsupported overhang into the plunge pool, and finally continuous headward retreat leaving behind a steep-sided gorge.
The evolution of a river gorge begins when running water encounters alternating rock strata, where a resistant rock layer overlies softer rock. Hydraulic action and abrasion erode the softer stratum beneath, creating an overhang above a plunge pool. When the overhang loses support, it collapses under gravity. As this sequence of undercutting and collapse repeats over time, the waterfall retreats upstream, leaving behind a narrow, steep-sided valley termed a gorge.

Adım Adım Çözüm

1
Identify the initial geological precondition.
A resistant caprock overlying less resistant rock layer provides the differential erosion setup.
Differential erosion cannot occur without contrast in rock hardness.
2
Trace the process of mechanical river erosion at the base.
Undercutting creates a plunge pool and an unsupported caprock overhang.
Hydraulic action and abrasion preferentially hollow out the weaker underlying stratum.
3
Determine the structural breakdown stage.
The overhang collapses due to gravity.
Once the undercutting removes critical support beneath the hard caprock, collapse is inevitable.
4
Identify the long-term geomorphic outcome.
Headward retreat creates a gorge.
Repeated cycles of undercutting and collapse cause the waterfall to migrate upstream.

Anahtar Kavram

Waterfall Retreat and Gorge Formation
Soru 211Soru →

Arrange the following geographic features and locations along the course of the Nile River in sequential order from its source region in Equatorial Africa to its terminus at the Mediterranean Sea.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from upstream (source) to downstream (mouth) is: Lake Victoria source area in Equatorial East Africa, followed by the Sudd wetland basin in South Sudan, then the confluence of the White Nile and Blue Nile at Khartoum, and finally Lake Nasser and the Aswan High Dam in Egypt.
The Nile River flows northward from the East African Plateau to the Mediterranean Sea. The correct order from source to mouth begins at Lake Victoria, moves north to the Sudd wetlands in South Sudan, continues to the junction of the White and Blue Nile rivers at Khartoum, and reaches Lake Nasser behind the Aswan High Dam in lower Egypt.

Adım Adım Çözüm

1
Identify the source region of the river system.
The White Nile originates in the Equatorial Lakes region around Lake Victoria in East Africa.
Rivers flow from high elevation/source headwaters toward lower elevation drainage outlets.
2
Trace the course through South Sudan.
North of the Equatorial Plateau, the river enters the flat, swampy Sudd wetland region in South Sudan.
The reduced gradient causes the river to spill into extensive wetlands before consolidating northward.
3
Locate the major confluence in Sudan.
At Khartoum (capital of Sudan), the White Nile merges with its major tributary, the Blue Nile coming from Lake Tana in Ethiopia.
This merger significantly increases the total discharge of the main Nile stream.
4
Trace the river to its lower course infrastructure and outlet.
In southern Egypt, the river enters Lake Nasser behind the Aswan High Dam, subsequently flowing through Egypt into the Nile Delta and discharging into the Mediterranean Sea.
The Aswan High Dam impounds the lower course of the Nile prior to its broad delta outlet.

Anahtar Kavram

The spatial sequence and physical characteristics along the course of the Nile River basin from source to mouth.
Soru 212Soru →

Regional economic groupings in Africa (such as ECOWAS, EAC, and SADC) pursue economic integration through distinct developmental phases. Arrange the following stages of regional economic integration in sequential order from the lowest degree of trade cooperation to the highest level of economic integration.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from lowest to highest degree of economic integration is: Preferential Trade Area, Free Trade Area, Customs Union, and Common Market.
Economic integration progresses sequentially: preferential reduction of tariffs on specific goods (Preferential Trade Area), followed by complete elimination of internal trade barriers (Free Trade Area), then the implementation of a shared external tariff for outside countries (Customs Union), and finally the free movement of production factors like labor and capital across member boundaries (Common Market).

Adım Adım Çözüm

1
Identify the foundational level of commercial cooperation.
Preferential Trade Area is identified first as it only lowers tariffs on selected products without removing them entirely.
Initial trade agreements among developing economic blocs start with partial tariff concessions.
2
Determine the next phase where internal trade barriers are eliminated.
Free Trade Area comes second as internal tariffs are completely abolished while countries retain separate tariffs against non-members.
Total internal tariff elimination is the defining step of a free trade area.
3
Identify the transition to a joint external trade policy.
Customs Union comes third as member countries establish a unified Common External Tariff (CET) for outside nations.
Harmonizing external trade policies transforms a free trade area into a customs union.
4
Identify the advanced phase permitting factor mobility.
Common Market is the final and highest stage listed, adding free movement of capital, labor, and services across national borders.
Factor mobility represents deeper socio-economic integration beyond product trade.

Anahtar Kavram

Stages of Regional Economic Integration in Africa
Tahmini Süre:1m 30s
Soru 213Soru →

Arrange the following sequential stages in the agro-allied manufacturing of cotton textiles in Nigeria (such as in Kaduna and Kano industrial clusters), from raw material extraction to the final finished product.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence starts with ginning harvested seed cotton to separate lint, followed by spinning lint into yarn, then weaving yarn into raw fabric, and concludes with dyeing, printing, and finishing the fabric.
In Nigeria's agro-based textile industry, processing follows a strict forward supply sequence: raw seed cotton is first ginned to remove seeds, the resulting lint is spun into yarn, the yarn is woven into raw cloth, and finally the fabric is dyed and finished for distribution.

Adım Adım Çözüm

1
Identify the primary raw agricultural input processing step
Ginning of raw seed cotton (separating fibers from seeds) must occur first before fibers can be processed.
Raw cotton harvested from farms contains seeds that must be removed mechanically at ginning mills.
2
Determine the intermediate fiber-processing stage
Cleaned lint is spun into yarn or thread.
Individual cotton fibers must be twisted and drawn out into continuous threads before fabric construction.
3
Determine the fabric construction stage
Yarn is woven or knitted into gray (raw) cloth.
Industrial looms interlock the spun yarn into a cohesive sheet of fabric.
4
Identify the final value-addition and finishing stage
Fabric is dyed, printed, and finished for commercial sale.
Chemical treatment, coloring, and patterning are the final steps before textiles are sent to apparel manufacturers or markets.

Anahtar Kavram

Agro-Allied Textile Processing Stages in Nigeria
Tahmini Süre:1m 0s
Soru 214Soru →

Arrange the following major African lakes in order of their maximum depth, from the deepest to the shallowest.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order from deepest to shallowest is Lake Tanganyika, Lake Malawi, Lake Victoria, and Lake Chad.
The correct sequence arranges the lakes by maximum depth: Lake Tanganyika is the deepest (~1,470 m), followed by Lake Malawi (~706 m), Lake Victoria (~84 m), and finally Lake Chad (~11 m).

Adım Adım Çözüm

1
Identify the deepest African lake formed within the East African Rift System.
Lake Tanganyika is the deepest in Africa (~1,470 m).
Rift valley formation creates steep, deep grabens.
2
Identify the second-deepest rift valley lake in Africa.
Lake Malawi is second (~706 m).
It occupies a deep rift trough similar to Tanganyika.
3
Identify the depth of the major downwarped basin lake.
Lake Victoria is third (~84 m).
It formed in a shallow saucer-shaped crustal depression rather than a rift fault.
4
Identify the shallowest interior drainage lake in the group.
Lake Chad is the shallowest (~11 m).
It is an endorheic basin lake with low average depth.

Anahtar Kavram

Relative depths and geomorphological origins of major African lakes
Soru 215Soru →

In an electronic accounting system, transaction data undergoes sequential stages during the data processing cycle. Arrange the following key stages of the accounting data processing cycle in the correct chronological order from start to finish.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct chronological sequence of the accounting data processing cycle is Data Collection, followed by Data Input, Data Processing, Information Output, and finally Data Storage.
The accounting data processing cycle follows a logical progression starting from capturing raw economic events via source documents (Collection), entering those details into the accounting computer system (Input), performing ledger operations and calculations (Processing), producing accounting statements and management reports (Output), and preserving the data securely for future compliance and audit (Storage).

Adım Adım Çözüm

1
Identify the origin of financial data
Data Collection (item_1) comes first as transactions must originate on source documents.
Without raw transaction documentation, no data can enter the system.
2
Determine how collected data enters the system
Data Input (item_2) follows Data Collection.
Collected source document details must be entered into software before calculation.
3
Analyze what happens to entered data
Data Processing (item_3) follows Data Input.
The system manipulates entered numbers, posting double entries and balancing accounts.
4
Identify the result of data manipulation
Information Output (item_4) follows Data Processing.
Reports and financial statements are generated from the processed ledger balances.
5
Determine the final preservation stage
Data Storage (item_5) is the final stage.
Completed reports and underlying databases are retained securely for future audit.

Anahtar Kavram

Accounting Data Processing Cycle
Soru 216Soru →

Arrange the following major African vegetation zones in proper sequential order, starting from the Equator (0°) and moving northward toward the Tropic of Cancer (23.5°N).

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequential order from the Equator northward to the Tropic of Cancer is: Tropical Rainforest → Guinea Savanna → Sudan Savanna → Sahel Savanna → Sahara Desert.
Moving northward from the Equator to the Tropic of Cancer, annual rainfall progressively declines while the duration of the dry season increases. This creates a distinct latitudinal sequence of vegetation belts: Tropical Rainforest at the Equator (0°), transitioning to Guinea Savanna, Sudan Savanna, Sahel Savanna, and finally the Sahara Desert.

Adım Adım Çözüm

1
Identify the vegetation zone closest to the Equator (0°).
Tropical Rainforest occupies the equatorial center characterized by high temperatures and abundant rainfall year-round.
Equatorial climate conditions produce dense rainforest vegetation.
2
Identify the moist savanna zone lying directly north of the rainforest.
Guinea Savanna borders the rainforest belt as annual precipitation begins to decrease.
A moderate dry season allows tall grasses and woodland trees to dominate.
3
Determine the drier savanna belt following the Guinea Savanna.
Sudan Savanna forms the next belt northward with lower annual rainfall.
Longer dry periods limit tree height and density, supporting shorter grasses and baobab trees.
4
Locate the semi-arid transition zone preceding the desert.
Sahel Savanna serves as the dry steppe transition zone between savanna and true desert.
Low, unpredictable rainfall supports only thorny scrubland and drought-hardy vegetation.
5
Identify the northern hyper-arid zone near the Tropic of Cancer.
Sahara Desert forms the final northern belt.
Subtropical high-pressure belts suppress rainfall, leading to desert landforms and xerophytic vegetation.

Anahtar Kavram

Latitudinal Zonation of African Vegetation Belts
Tahmini Süre:1m 30s
Soru 217Soru →

Arrange the following agricultural land-use zones according to Von Thünen's model of agricultural location, starting from the central market outwards to the rural periphery:

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order from the central market outwards is: Market gardening and intensive dairying, followed by Forestry and fuel wood production, then Arable crop farming with fallow rotation, and finally Extensive livestock ranching.
Von Thünen's model demonstrates that land use intensity decreases as distance from the central market increases due to land rent and transport costs. Market gardening and dairying occupy the first ring because produce is highly perishable. Forestry occupies the second ring owing to the heavy weight and high transport cost of wood. Arable cropping with fallow rotation occupies the middle rings, while extensive livestock ranching operates at the outer periphery where land rent is lowest.

Adım Adım Çözüm

1
Analyze transport cost and perishability for the innermost zone.
Market gardening and intensive dairying require immediate proximity to urban consumers to prevent spoilage and minimize high unit transport costs.
Perishable goods demand the highest bid-rent location closest to the central market.
2
Determine the spatial position of heavy bulk commodities.
Forestry and fuel wood production occupy the second ring.
Timber is heavy and bulky to haul, placing its ideal location close to town before transport costs exceed product value.
3
Position crop farming systems requiring moderate land areas.
Arable crop farming with fallow rotation forms the middle agricultural belt.
Grains and field crops yield lower returns per hectare than market gardens, requiring cheaper land further from the core.
4
Identify the outermost land-use activity.
Extensive livestock ranching occupies the periphery.
Animals require extensive land per unit of output and can be walked to market, minimizing freight cost constraints.

Anahtar Kavram

Von Thünen's Model of Agricultural Land Use
Soru 218Soru →

In the agro-allied manufacturing sector of southern Nigeria (such as in Ondo, Imo, and Cross River states), oil palm fruits undergo a specific sequence of industrial processing stages to yield refined vegetable oil and industrial palm kernel products. Arrange the following processing stages in the correct chronological sequence from raw harvest treatment to final industrial refining.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with sterilization and steam digestion, followed by mechanical pressing, clarification and drying of crude oil, and concludes with industrial fractionation and secondary refining.
The industrial processing of palm oil in Nigeria follows a logical progression from raw material stabilization to final product refining. Harvested fruit bunches are first sterilized and digested with steam to stop enzymatic degradation and break down pulp fibers. Next, mechanical presses squeeze out crude palm oil and separate palm nuts. The crude oil is then clarified and dried to remove water and suspended sludge. Finally, purified crude palm oil undergoes industrial fractionation and secondary refining to produce liquid cooking oil (olein), solid fats (stearin), and soaps.

Adım Adım Çözüm

1
Identify the primary raw-material preparation stage.
Sterilization and steam digestion stop acidification and soften fruit tissue.
Raw agricultural inputs require enzymatic stabilization before physical oil extraction can begin.
2
Determine the primary extraction stage.
Mechanical pressing extracts crude palm oil and yields palm nuts.
Softened pericarp must be mechanically compressed to yield liquid crude oil.
3
Determine the primary purification stage.
Clarification and centrifugation separate water, cell debris, and fibrous sludge from the oil.
Crude oil extracted from presses contains moisture and particulates that cause rapid spoilage if not removed.
4
Identify the value-addition secondary manufacturing stage.
Industrial fractionation produces refined edible olein, solid stearin, and specialty fats.
Pure crude palm oil undergoes thermal separation and refining in downstream processing plants to create marketable consumer and industrial goods.

Anahtar Kavram

Agro-allied Industrial Processing Stages in Southern Nigeria
Soru 219Soru →

Arrange the following steps involved in admitting a new member state into the United Nations Organisation (UNO) in the correct procedural sequence from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct procedural order for admitting a new UN member state is: (1) Submission of application to the Secretary-General, (2) Security Council evaluation and recommendation vote, (3) Transmission of the recommendation to the General Assembly, and (4) General Assembly approval by a two-thirds majority vote.
According to Article 4 of the United Nations Charter, the admission of any state to membership in the United Nations is effected by a decision of the General Assembly upon the recommendation of the Security Council. Therefore, the candidate state first submits an application to the Secretary-General, the Security Council deliberates and recommends admission (requiring non-exercise of the veto by any permanent member), the recommendation is forwarded to the General Assembly, and the General Assembly formally admits the state with a two-thirds majority vote.

Adım Adım Çözüm

1
Identify the initiating step in the UN admission process.
The applicant nation submits a formal letter to the UN Secretary-General promising to accept Charter obligations.
Administrative procedure requires a formal application before any UN organ takes action.
2
Determine the primary executive organ required to evaluate and vote on the request.
The Security Council considers the application and votes to make a formal recommendation.
Under Article 4 of the UN Charter, General Assembly voting cannot occur without a prior recommendation from the Security Council.
3
Trace the movement of the decision from the Security Council to the General Assembly.
The favorable recommendation is transmitted to the General Assembly.
The General Assembly acts as the representative plenary body that makes the final admission decision upon recommendation.
4
Identify the final voting requirement for formal admission.
The General Assembly votes to approve admission with a two-thirds majority vote.
Admission of new members is classified as an 'important question' under Article 18 of the UN Charter, requiring a two-thirds majority.

Anahtar Kavram

Procedure for Admitting New Member States to the United Nations
Soru 220Soru →

Arrange the following occupational activities in the correct sequential order of production and distribution, moving from the primary stage of raw material extraction to the final stage of tertiary consumer delivery.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with harvesting raw cotton (Primary occupation), followed by spinning cotton into fabric (Secondary occupation), distributing bulk fabrics through wholesale (Tertiary commercial occupation), and concludes with retailing finished garments to consumers (Tertiary retail distribution).
Production and trade follow a logical progression starting from primary extraction (harvesting raw cotton), advancing to secondary manufacturing (spinning fabric at a textile mill), moving into tertiary wholesale distribution (warehousing bulk fabrics), and finishing with tertiary retail distribution (selling garments to final consumers).

Adım Adım Çözüm

1
Identify the primary (extractive) stage activity
Harvesting raw cotton on a farm is the initial extraction of natural resources.
Primary occupations involve gathering or extracting natural raw materials directly from the environment.
2
Identify the secondary (manufacturing) stage activity
Spinning raw cotton into finished fabric at a textile mill converts the harvested yield into processed goods.
Secondary occupations focus on manufacturing, processing, and converting raw materials into usable industrial products.
3
Identify the tertiary commercial wholesale distribution activity
Warehousing and distributing bulk fabrics through a wholesale merchant organizes large-scale trade.
Tertiary commercial activities link producers to intermediate sellers by providing essential distribution services.
4
Identify the final tertiary retail distribution activity
Retailing finished garments to individual consumers at a boutique delivers the final product to the consumer.
Retail trade serves as the final tertiary link in the commercial chain of distribution.

Anahtar Kavram

Sequential stages of occupational activities across primary, secondary, and tertiary sectors
ÖncekiSayfa 11 / 32Sonraki
Tüm alıştırma soruları — JAMB UTME | Examkin