Examkin

Tüm alıştırma soruları

631 soru

Tüm türler13,931Çoktan seçmeli7,139Doğru / Yanlış771Sayısal1,526Eşleştirme2,583Sıralama631Boşluk doldurma1,223Kısa cevap58
Soru 561Soru →

In Alfred Weber's Least Cost Theory, determining the optimal spatial location for a manufacturing plant requires a systematic, multi-stage cost minimization procedure. Arrange the following analytical steps in the correct sequential order, from the initial transport cost baseline to the final location decision.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence of steps in Weberian industrial location analysis is: 1) Locate the point of minimum transport cost by balancing raw material assembly and market distribution costs; 2) Identify prospective alternative production sites offering lower unit labor costs; 3) Construct isodapanes around the minimum transport cost point to determine if labor cost savings exceed additional transport costs; and 4) Evaluate whether agglomeration economies within an existing industrial cluster provide cost savings greater than total transport and labor deviation penalties.
Alfred Weber's Least Cost Theory applies a strict sequential framework to industrial location analysis. First, transport costs are evaluated in isolation to determine the least-transport-cost point. Second, potential alternative production sites offering cheap labor are identified. Third, isodapanes are plotted around the primary transport benchmark to calculate whether labor savings exceed additional transport costs (critical isodapane test). Fourth, agglomeration economies are evaluated to assess whether shared industrial cluster advantages offset combined transport and labor penalties.

Adım Adım Çözüm

1
Analyze transport costs in isolation to determine the locational triangle equilibrium.
Establishes the point of minimum transport cost as the primary location benchmark.
Weber considers transport cost to be the main factor governing industrial location choices.
2
Locate potential cheap labor sites across the region.
Identifies locations that offer unit labor savings compared to the primary benchmark.
Labor cost is the first secondary factor introduced to check for potential spatial deviation.
3
Calculate transport deviation expenditure using isodapanes.
Determines whether cheap labor sites fall inside the critical isodapane boundary.
Relocation to a cheap labor site is economically rational only when unit labor savings exceed extra transport expenses.
4
Incorporate agglomeration and deglomeration economies.
Finalizes the plant location by determining whether clustering benefits justify moving to an industrial node.
Agglomeration is evaluated as the tertiary force, weighing shared industrial benefits against total transport and labor penalties.

Anahtar Kavram

Hierarchical spatial decision-making process in Weber's Least Cost Theory
Tahmini Süre:2m 0s
Soru 562Soru →

When an industrial firm evaluates potential locations for establishing a manufacturing plant using spatial economic principles, a multi-stage location assessment is conducted. Arrange the following steps of the industrial site selection process in the correct sequential order, from initial raw material evaluation to final agglomeration analysis.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with calculating the Material Index, followed by locating the point of minimum transport cost, then evaluating labor cost differentials, and finally assessing agglomeration advantages.
The logical sequence follows classical industrial location methodology: first establishing material weight loss characteristics (Material Index), next determining the minimum transport cost locus, then examining labor wage deviations, and finally evaluating cluster agglomeration benefits.

Adım Adım Çözüm

1
Determine primary transport orientation using material weight ratios
Calculated the Material Index to identify whether inputs lose or gain weight during processing.
Understanding material weight transformation establishes whether the plant should orient toward input sources or consumer markets.
2
Identify the minimum transport cost location
Determined the geographic point where total assembly freight and finished product delivery freight are minimized.
Transportation represents the foundational baseline cost in industrial location theory.
3
Adjust for spatial labor wage differentials
Assessed whether labor savings at an alternative site outweigh the extra freight charges incurred by shifting away from the transport locus.
Labor acts as a secondary factor that can divert location away from the pure transport-least-cost point.
4
Incorporate agglomeration and external economies
Finalized plant location by deciding if co-locating with complementary industries in a cluster offers superior economic savings.
Agglomeration forces are analyzed last to account for external benefits like shared infrastructure, specialized labor pools, and industrial linkage.

Anahtar Kavram

Sequential Stages of Industrial Location Assessment
Tahmini Süre:1m 30s
Soru 563Soru →

Arrange the following stages of regional economic integration in Africa in order from the lowest level of economic integration to the highest level.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from lowest to highest level of economic integration is: Free Trade Area, Customs Union, Common Market, and Economic Union.
Regional economic integration progresses sequentially starting from a Free Trade Area (internal tariff removal), followed by a Customs Union (common external tariff), advancing to a Common Market (free movement of labor and capital), and culminating in an Economic Union (harmonized fiscal and monetary policy).

Adım Adım Çözüm

1
Identify the foundational stage where internal trade barriers are eliminated.
Free Trade Area is the starting point of regional economic integration.
Countries first remove tariffs on trade among themselves before coordinating external trade rules.
2
Identify the stage that establishes unified external trade policies.
Customs Union is the second stage.
It builds upon the Free Trade Area by instituting a common external tariff against non-member nations.
3
Identify the stage allowing mobility of production factors across borders.
Common Market is the third stage.
It extends integration beyond physical trade to permit free movement of labor, capital, and services.
4
Identify the stage requiring institutional policy harmonization and monetary alignment.
Economic Union is the final and highest stage.
It requires member states to harmonize macro-economic policies and often adopt a unified currency.

Anahtar Kavram

Stages of Regional Economic Integration
Soru 564Soru →

Arrange the following Nigerian towns in order of decreasing duration of the rainy season, starting from the town with the longest wet season to the town with the shortest wet season.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from longest to shortest rainy season duration is Calabar, followed by Enugu, then Kaduna, and finally Maiduguri.
The duration of the wet season in Nigeria depends primarily on latitude and proximity to the Atlantic Ocean, as moisture is brought by the maritime Tropical (mT) air mass. Coastal Calabar in the south receives the longest rainy period (9–10 months), followed by sub-coastal Enugu (7–8 months), interior Kaduna (5–6 months), and far northern Maiduguri in the Sahel zone (3–4 months).

Adım Adım Çözüm

1
Analyze the latitudinal movement of the Inter-Tropical Discontinuity (ITD) across Nigeria.
The rain-bearing maritime Tropical (mT) air mass moves northward behind the advancing ITD from south to north, and retreats southward from north to south.
Duration of the rainy season in Nigeria decreases progressively from the southern coast to the far northern interior.
2
Determine the relative geographic locations and climatic belts of each town.
Calabar is coastal (South), Enugu is southern interior, Kaduna is northern middle-latitude (Sudan belt), and Maiduguri is far northeast (Sahel belt).
Latitudinal positioning directly correlates with annual rainfall duration.
3
Sequence the towns from highest annual rainy season duration to lowest.
Calabar (9–10 months) > Enugu (7–8 months) > Kaduna (5–6 months) > Maiduguri (3–4 months).
Southern coastal areas stay under the influence of moisture-bearing winds longest, while northern continental fringes receive brief seasonal rainfall.

Anahtar Kavram

Rainfall gradient and seasonality driven by ITD movement across Nigeria
Tahmini Süre:1m 0s
Soru 565Soru →

Arrange the following levels of settlement hierarchy found in Nigeria in ASCENDING order based on their typical population size and complexity of economic functions, starting from the lowest level.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct ascending sequence of Nigerian settlement hierarchy levels is Isolated Farmstead / Homestead, Rural Hamlet, Nucleated Agricultural Village, and Metropolitan Urban Center.
Settlement hierarchy categorizes human habitations from smallest to largest based on population threshold, land coverage, and the range of central functions provided. The isolated farmstead/homestead is the smallest unit (single family), followed by a rural hamlet (small cluster of homes), then a nucleated agricultural village (larger rural population with periodic markets), and finally a metropolitan urban center (large population, high density, and specialized non-agricultural services).

Adım Adım Çözüm

1
Identify the lowest functional unit of habitation in rural Nigeria.
The Isolated Farmstead / Homestead is the smallest unit, typical of dispersed agricultural areas such as parts of the Benue Valley.
It contains only a single housing structure or family compound with minimal land footprint.
2
Identify the next tier above an isolated homestead.
The Rural Hamlet forms the second tier.
It clusters several homesteads together to form a small hamlet with a low population threshold.
3
Determine the rural community center level.
The Nucleated Agricultural Village forms the third tier.
Villages aggregate larger populations capable of supporting periodic local markets, primary schools, and health centers.
4
Identify the highest settlement order in the given list.
The Metropolitan Urban Center occupies the highest tier.
Metropolitan cities like Ibadan, Kano, and Lagos serve as major economic, commercial, and administrative hubs with high population density and secondary/tertiary functions.

Anahtar Kavram

Settlement Hierarchy and Population Distribution in Nigeria
Soru 566Soru →

Transportation networks and maritime trade corridors serve as vital trade gateways for African economies. Arrange the following major East African seaports in correct geographical sequence from North to South along the Indian Ocean coastline:

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct geographical sequence from North to South along the Indian Ocean coast is Port of Djibouti (Djibouti), Port of Mombasa (Kenya), Port of Dar es Salaam (Tanzania), and Port of Beira (Mozambique).
The Port of Djibouti is situated in the Horn of Africa near the Bab-el-Mandeb Strait (approx. 11.6° N). Moving southwards along the East African Indian Ocean coastline, the Port of Mombasa in Kenya is encountered next (approx. 4.0° S), followed by the Port of Dar es Salaam in Tanzania (approx. 6.8° S), and finally the Port of Beira in Mozambique (approx. 19.8° S).

Adım Adım Çözüm

1
Identify the geographical latitude and national position of each port along the East African coast.
Djibouti is situated furthest north near the Gulf of Aden; Mombasa is on the Kenyan coast; Dar es Salaam is on the Tanzanian coast south of Kenya; Beira is in Mozambique.
Geographical alignment follows the coastline from the Horn of Africa down to Southern Africa.
2
Arrange the ports sequentially from highest northern latitude to lowest southern latitude.
Port of Djibouti → Port of Mombasa → Port of Dar es Salaam → Port of Beira.
This reflects the accurate north-to-south spatial layout of East African maritime trade gateways.

Anahtar Kavram

Geographical distribution of African maritime trade ports and transport gateways
Soru 567Soru →

A regional transport planning board is evaluating four different transport network graph topologies that each connect five key industrial nodes (v=5v = 5). Arrange the following network topologies in order of their topological connectivity as measured by the Beta Index (β\beta), from the LOWEST connectivity level to the HIGHEST connectivity level.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

Linear tree network (e=4,β=0.80e = 4, \beta = 0.80) ��� Simple ring circuit network (e=5,β=1.00e = 5, \beta = 1.00) → Delta network (e=7,β=1.40e = 7, \beta = 1.40) → Complete mesh network (e=10,β=2.00e = 10, \beta = 2.00)
Topological connectivity in network analysis is measured using the Beta Index formula β=ev\beta = \frac{e}{v}, where ee represents the number of links (edges) and vv represents the number of nodes (vertices). For a fixed set of v=5v = 5 nodes, the connectivity value increases as more links are added. Evaluating each option yields: Linear tree network (β=45=0.80\beta = \frac{4}{5} = 0.80), Simple ring circuit (β=55=1.00\beta = \frac{5}{5} = 1.00), Delta network (β=75=1.40\beta = \frac{7}{5} = 1.40), and Complete mesh network (β=105=2.00\beta = \frac{10}{5} = 2.00). Arranging these values in ascending order places the linear tree network first, followed by the simple ring circuit, the delta network, and finally the complete mesh network.

Adım Adım Çözüm

1
Identify the formula for the Beta Index in network graph analysis
The Beta Index is defined as β=ev\beta = \frac{e}{v}, where ee is the number of edges (routes or links) and vv is the number of vertices (nodes or settlements).
The Beta Index quantifies the degree of connectivity of a network graph.
2
Calculate the Beta Index for each given network topology with v=5v = 5
Linear tree network: β=45=0.80\beta = \frac{4}{5} = 0.80; Simple ring circuit: β=55=1.00\beta = \frac{5}{5} = 1.00; Delta network: β=75=1.40\beta = \frac{7}{5} = 1.40; Complete mesh network: β=105=2.00\beta = \frac{10}{5} = 2.00.
Substituting the specific edge counts (ee) and vertex count (v=5v = 5) yields the exact numerical connectivity value for each network.
3
Sequence the topologies in ascending order of their Beta Index values
Rank order: 0.80<1.00<1.40<2.000.80 < 1.00 < 1.40 < 2.00.
The question specifies arranging from the lowest connectivity level to the highest connectivity level.

Anahtar Kavram

Topological Network Connectivity and Beta Index Analysis
Tahmini Süre:1m 30s
Soru 568Soru →

Arrange the following commercial river ports and navigation hubs along the River Niger in Nigeria in geographical sequence, starting from the most upstream northern location to the lower southern course.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from upstream (north) to downstream (south) along the River Niger is Yelwa, followed by Jebba, Lokoja, and finally Onitsha.
Following the course of the River Niger from north to south within Nigeria: Yelwa (Kebbi State) is at the upper reaches near Lake Kainji; Jebba (Kwara State) is along the middle course below Kainji; Lokoja (Kogi State) sits at the confluence with the Benue River; and Onitsha (Anambra State) lies along the lower course leading into the Niger Delta region.

Adım Adım Çözüm

1
Identify the northernmost inland river port where the River Niger flows through north-western Nigeria.
Yelwa in Kebbi State is located on the upper course of the Niger River upstream of Lake Kainji.
The River Niger enters Nigeria from the north-west, making Yelwa the most upstream of the listed river ports.
2
Determine the middle course navigation and bridging point below Lake Kainji.
Jebba in Kwara State lies along the middle course of the River Niger.
Jebba is located south of Kainji Lake and upstream of the Niger-Benue confluence.
3
Locate the major confluence port where the River Benue joins the River Niger.
Lokoja in Kogi State is positioned at the confluence of the Niger and Benue rivers.
Lokoja receives the flow from both Jebba (Niger) and Makurdi (Benue) before the unified river flows south.
4
Identify the lower river port servicing commercial trade in south-eastern Nigeria before the delta distributaries.
Onitsha in Anambra State is situated on the east bank of the lower River Niger.
Onitsha is the southernmost of these inland river ports before the river splits into its delta network.

Anahtar Kavram

Spatial Layout of Nigerian Inland Waterway Transport Nodes along the River Niger
Tahmini Süre:2m 0s
Soru 569Soru →

Arrange the following sequential stages in the process of soil salinization—a major form of environmental land degradation in semi-arid agricultural zones—from the initial human activity to the ultimate ecological impact.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence of soil salinization begins with excessive irrigation on poorly drained land, followed by capillary uptake of saline groundwater, surface water evaporation leaving salt deposits, and ultimately the formation of a toxic saline crust that causes crop failure.
The correct sequence follows the hydro-geological progression of land salinization. Over-irrigation on poorly drained agricultural land first saturates the subsurface. Capillary forces then pull the saline groundwater upward into topsoil layers. Rapid surface evaporation under hot, dry conditions removes pure moisture while leaving concentrated mineral salts behind. Finally, continuous salt accumulation forms a toxic surface crust that destroys soil structure and prevents plant water uptake.

Adım Adım Çözüm

1
Identify the initial triggering activity
Excessive irrigation water applied to poorly drained soil introduces surplus moisture into the ground.
Human-induced over-irrigation raises the local water table, initiating the hydraulic process.
2
Determine the physical subsurface movement
Capillary action draws the salt-rich groundwater upward toward the surface root zone.
Water moves from saturated subsoil layers to drier upper soil horizons due to surface tension and soil pore suction.
3
Analyze the climatic driving mechanism
High surface evaporation under hot semi-arid conditions vaporizes moisture, concentrating salts.
Evaporation isolates mineral ions such as sodium and chloride near the surface.
4
Establish the final degradation consequence
Formation of a toxic saline crust leads to severe osmotic stress, vegetation destruction, and land degradation.
Hyper-saline topsoil prevents root water absorption and breaks down soil aggregate structure.

Anahtar Kavram

Soil Salinization and Land Degradation Mechanics in Semi-Arid Environments
Soru 570Soru →

Mass movement processes vary significantly in their mechanism and rate of downslope displacement under the influence of gravity. Arrange the following mass wasting processes in sequential order from the slowest rate of movement to the fastest rate of movement.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from slowest to fastest velocity is Soil Creep, followed by Solifluction, Rotational Slump, and Rockfall.
Mass wasting processes are classified by their velocity and movement mechanism. Soil creep is imperceptibly slow (millimeters/year). Solifluction is slow soil flow (centimeters to meters/year). Rotational slump represents moderate speed coherent rotational sliding along a curved rupture surface. Rockfall is the fastest process, featuring airborne free-fall at several meters per second.

Adım Adım Çözüm

1
Identify the slowest form of mass wasting.
Soil creep is identified as the slowest process, measuring only millimeters per year.
Creep is driven by freeze-thaw or wetting-drying expansion/contraction cycles operating over extended periods.
2
Identify the slow-to-moderate flow process operating in saturated topsoil.
Solifluction follows soil creep as a slow downslope flow process.
Water saturation reduces friction in saturated regolith over impermeable substrate, causing slow flow measured in centimeters to meters annually.
3
Identify the moderate-speed sliding process.
Rotational slump comes next in velocity.
Slumping occurs along a defined curved slip plane, yielding faster displacement than soil creep or solifluction.
4
Identify the fastest mass movement process.
Rockfall is identified as the fastest mass wasting type.
Rockfall involves direct free-fall under gravity through air without basal friction, resulting in instantaneous, high-velocity movement.

Anahtar Kavram

Mass Wasting Rates of Movement
Soru 571Soru →

In a Nigerian chemical manufacturing plant producing soap from local palm oil, arrange the key industrial stages in the correct sequential order from raw material preparation to the final finished product.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with heating raw palm oil with concentrated sodium hydroxide solution, followed by boiling to complete saponification into soap and glycerol, then adding concentrated sodium chloride solution for salting out, and lastly washing, blending, and molding into finished soap bars.
The industrial manufacturing of soap follows a logical chemical sequence: raw oil is first combined with concentrated NaOHNaOH and heated; boiling carries out the saponification reaction producing soap and glycerol; adding brine (NaClNaCl) decreases soap solubility to precipitate it (salting out); and finally, downstream refining, washing, perfuming, and molding produce marketable bars.

Adım Adım Çözüm

1
Identify raw material mixing
Heating palm oil (triglycerides) with caustic soda (NaOHNaOH) prepares the reactants.
Chemical reactions require proper mixing and thermal energy to initiate saponification.
2
Perform the core chemical reaction
Boiling hydrolyzes triglycerides into sodium carboxylates (soap) and propane-1,2,3-triol (glycerol).
The fundamental chemical transformation occurs during this boiling stage.
3
Separate the product using electrolyte addition
Adding brine (NaClNaCl) precipitates the soap curd by common-ion effect/salting out.
Soap is insoluble in concentrated salt solution, separating it cleanly from liquid glycerol.
4
Finish downstream processing
The crude soap is purified, blended with additives, and molded into market bars.
Commercial viability requires washing excess alkali, adding fragrance, and shaping.

Anahtar Kavram

Saponification process and salting out in soap manufacturing
Soru 572Soru →

A field surveyor needs to determine the horizontal distance between two stations located on steeply sloping ground using a steel measuring tape and a plumb bob via the direct stepping method. Arrange the following field procedure steps in the correct chronological order from start to finish.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct procedural order is: (1) Insert ranging poles at both stations to establish the line, (2) Hold the tape zero mark at the upper station and extend the tape horizontally, (3) Suspend a plumb bob from the tape end to transfer the point vertically down, (4) Pin an arrow at the plumb bob tip on the ground, and (5) Advance down the slope repeating the steps progressively.
The stepping method requires first establishing a straight line between the stations using ranging poles. Next, short horizontal segments are extended from the higher elevation toward the lower elevation. A plumb bob is suspended from the elevated end of the horizontal tape to transfer the point vertically to the ground surface, where an arrow is pinned. The team then advances to repeat this sequence progressively down the slope.

Adım Adım Çözüm

1
Establish the baseline path between stations.
Ranging poles fixed at both higher and lower stations line up the direction of measurement.
Clear line alignment prevents off-line measurement errors.
2
Stretch the tape horizontally from the upper station.
The tape forms a horizontal segment over the sloping terrain.
The direct horizontal stepping method requires holding convenient short lengths of tape parallel to the horizontal plane.
3
Use a plumb bob to project the tape mark to the slope surface.
The vertical projection point on the sloping ground is identified.
A plumb bob ensures true vertical transfer under the influence of gravity.
4
Mark the transferred ground position.
An arrow is inserted at the plumb bob tip.
This establishes a reliable temporary station for the next measurement interval.
5
Advance continuously down the slope.
Subsequent horizontal sections are measured and summed.
Accumulating the individual horizontal step lengths gives the exact horizontal distance between the end stations.

Anahtar Kavram

Direct Stepping Method on Sloping Ground
Soru 573Soru →

Agricultural production systems in Nigeria exhibit a strong spatial distribution governed by the south-to-north latitudinal rainfall gradient. Arrange the following crop and agricultural production belts in order from the far South (highest annual rainfall) to the far North (lowest annual rainfall):

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from South to North is: Oil palm and rubber commercial tree crop belt, followed by Cocoa and root tuber production belt, then Grain maize, grain legumes, and cotton production belt, and finally Millet, sorghum, and pastoral cattle rearing belt.
Agricultural systems in Nigeria are primarily controlled by annual rainfall duration and amount, which decline along a latitudinal gradient from south to north. The southernmost humid forest zone receives the highest rainfall (>2,000 mm), favoring moisture-demanding tree crops like oil palm and rubber. Moving north into the forest-savanna transition, cocoa and root crops dominate. Further north in the sub-humid Guinea Savanna, lower rainfall supports cereal crops like maize and industrial crops like cotton. In the northernmost Sudan and Sahel Savanna, low rainfall (<700 mm) restricts crop farming to drought-resistant grains like millet and sorghum, alongside pastoral cattle herding.

Adım Adım Çözüm

1
Analyze the climatic and moisture requirements of each agricultural system in Nigeria.
Tree cash crops like oil palm and rubber require heavy precipitation (>2000 mm), root tubers and cocoa require moderate-to-high rainfall, cereal grains and cotton require moderate seasonal rainfall, while millet and pastoral cattle rearing thrive in low-rainfall semi-arid environments.
Mean annual precipitation in Nigeria decreases progressively from over 3,000 mm along the southern coast to less than 600 mm near the northern border.
2
Map each agricultural belt to its corresponding ecological zone along the latitudinal gradient.
Southern Rainforest Belt -> Derived Savanna / Forest Transition Zone -> Guinea Savanna -> Sudan/Sahel Savanna.
Ecological zones in Nigeria run in east-west bands parallel to lines of latitude.
3
Sequence the items from the southernmost coastal zone to the northernmost border zone.
The correct sequence starts with oil palm and rubber, proceeds to cocoa and yam, continues to cotton and maize, and finishes with millet, sorghum, and pastoralism.
This order accurately reflects the decreasing rainfall gradient from South to North.

Anahtar Kavram

Latitudinal Zonation of Agricultural Systems in Nigeria
Soru 574Soru →

A physics laboratory utilizes four specialized instruments to detect different regions of the electromagnetic spectrum: an aerial antenna, a thermopile, a photographic plate sensitive to sun-tanning radiation, and a Geiger-Müller tube.

Arrange these detectors in order of INCREASING frequency of the electromagnetic radiation they are primarily designed to detect (from lowest frequency to highest frequency).

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order from lowest frequency to highest frequency is: Aerial antenna (Radio waves) → Thermopile (Infrared) → Photographic plate sensitive to sun-tanning radiation (Ultraviolet) → Geiger-Müller tube (Gamma rays).
The correct sequence arranges the instruments according to the increasing frequency of the radiation they detect. Radio waves (detected by an aerial antenna) have the lowest frequency, followed by infrared radiation (detected by a thermopile), ultraviolet radiation (detected by photographic plates sensitive to sun-tanning rays), and gamma rays (detected by a Geiger-Müller tube) which have the highest frequency.

Adım Adım Çözüm

1
Identify the type of electromagnetic radiation detected by each device.
Aerial antenna detects radio waves; Thermopile detects infrared radiation; Photographic plate for tanning radiation detects ultraviolet radiation; Geiger-Müller tube detects gamma rays.
Each detector operates on specific physical properties characteristic of a particular band of the electromagnetic spectrum.
2
Recall the order of the electromagnetic spectrum in terms of frequency (ff).
Radio waves (<109 Hz< 10^9\text{ Hz}) < Infrared (1011−1014 Hz10^{11} - 10^{14}\text{ Hz}) < Ultraviolet (1015−1017 Hz10^{15} - 10^{17}\text{ Hz}) < Gamma rays (>1019 Hz> 10^{19}\text{ Hz}).
Frequency increases continuously across the spectrum from radio waves to gamma rays.
3
Sequence the detectors based on their associated radiation frequencies from lowest to highest.
Aerial antenna →\rightarrow Thermopile →\rightarrow Photographic plate sensitive to sun-tanning radiation →\rightarrow Geiger-Müller tube.
This directly matches the increasing frequency order of radio waves, infrared, ultraviolet, and gamma rays.

Anahtar Kavram

Detection mechanisms and frequency distribution across the electromagnetic spectrum
Tahmini Süre:2m 0s
Soru 575Soru →

During a normal mammalian cardiac cycle, electrical excitation coordinates the synchronized contraction of the heart chambers. What is the correct sequence of electrical impulse propagation through the cardiac tissues starting from the initiation of the heartbeat?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence of cardiac conduction begins with depolarization at the sinoatrial (SA) node, followed by the spread of excitation across the atrial myocardium, a brief delay at the atrioventricular (AV) node, rapid signal conduction through the Bundle of His and Purkinje fibers, and finally contraction of the ventricular myocardium.
In the mammalian heart, the electrical signal originates spontaneously at the sinoatrial (SA) node in the right atrium. The impulse spreads across the atrial myocardium, causing atrial systole. It then reaches the atrioventricular (AV) node, where conduction is delayed to allow complete ventricular filling. From the AV node, the impulse travels rapidly through the Bundle of His and Purkinje fibers, causing coordinated contraction of the ventricular myocardium from the apex upward.

Adım Adım Çözüm

1
Identify the primary pacemaker site where the cardiac action potential originates.
The heartbeat starts at the sinoatrial (SA) node located in the right atrium wall.
The SA node possesses the intrinsic capability for spontaneous rhythm generation.
2
Trace the path of electrical excitation across the upper chambers.
The signal spreads through the muscle cells of both atria, causing atrial contraction.
Atrial muscle fibers are electrically connected via intercalated discs.
3
Determine the role and location of the secondary conducting node.
The signal reaches the atrioventricular (AV) node, where its transmission is momentarily delayed.
This delay ensures ventricular filling occurs prior to ventricular systole.
4
Follow the specialized rapid conducting pathway down the ventricles.
The signal travels down the Bundle of His and through Purkinje fibers in the ventricular walls.
Standard muscle conduction would be too slow to produce coordinated ventricular pumping.
5
Identify the final mechanical response of the lower chambers.
The ventricular myocardium depolarizes and contracts from the apex toward the base of the heart.
This upward squeezing motion efficiently ejects blood into the major arterial trunks.

Anahtar Kavram

Mammalian Cardiac Conduction Pathway
Soru 576Soru →

Arrange the following hydrocarbons in order of increasing boiling point, starting with the compound that has the lowest boiling point:

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order from lowest to highest boiling point is 2,2-dimethylpropane, 2-methylbutane, pentane, and hexane.
Boiling points of alkanes depend on molecular mass and surface area contact. Hexane has the highest molecular mass and largest surface area, yielding the highest boiling point. Among the structural isomers of pentane, increased branching produces a more spherical shape with smaller surface contact area, reducing intermolecular van der Waals forces. Consequently, 2,2-dimethylpropane (most branched) has the lowest boiling point, followed by 2-methylbutane, straight-chain pentane, and finally hexane.

Adım Adım Çözüm

1
Compare molecular mass and carbon chain length among the given hydrocarbons.
hexane (C6H14C_6H_{14}) has a larger molecular mass and longer chain than the pentane isomers (C5H12C_5H_{12}), giving it the strongest London dispersion forces and highest boiling point.
Boiling point increases with molar mass in a homologous series due to increased electron cloud polarizability.
2
Compare the degree of branching among the structural isomers of pentane (C5H12C_5H_{12}).
2,2-dimethylpropane is highly branched (compact spherical shape), 2-methylbutane is moderately branched, and pentane is a straight chain.
Increased branching makes the molecule more spherical, reducing the surface area available for intermolecular van der Waals contact.
3
Rank all four compounds in order of increasing boiling point.
2,2-dimethylpropane < 2-methylbutane < pentane < hexane.
More branched isomers have lower boiling points than less branched isomers of the same molecular formula, and higher molar mass alkanes boil at higher temperatures than lower mass alkanes.

Anahtar Kavram

Effect of molecular mass and chain branching on alkane boiling points
Tahmini Süre:1m 0s
Soru 577Soru →

Polyploidy is a primary mechanism of rapid sympatric speciation in flowering plants. Arrange the following steps of allopolyploid speciation in the correct chronological sequence from initial interbreeding to the formation of a fertile new species.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence of allopolyploid speciation begins with interspecific hybridization between two parental species, followed by hybrid sterility due to unpaired non-homologous chromosomes, subsequent spontaneous chromosome doubling (polyploidization), and finally the restoration of fertility establishing a novel, reproductively isolated polyploid species.
Allopolyploidy represents a mode of sympatric speciation driven by hybridization followed by genome duplication. The process initiates when two related but distinct species interbreed to produce an interspecific hybrid. This hybrid is initially sterile because its chromosomes are non-homologous and cannot pair during meiosis. When spontaneous chromosome doubling occurs, every chromosome acquires an identical partner, which restores balanced meiotic division and fertility. The resulting polyploid population is fertile among itself but reproductively isolated from both parent species, constituting a new species.

Adım Adım Çözüm

1
Identify the initiating event of allopolyploid speciation.
Two distinct species cross-pollinate to generate an interspecific hybrid offspring.
Allopolyploidy requires genomes originating from two distinct ancestral species.
2
Determine the initial reproductive status of the interspecific hybrid.
The hybrid is sterile because non-homologous chromosomes cannot synapse properly during prophase I of meiosis.
Lack of matching homologous chromosomes prevents balanced chromosome segregation into viable gametes.
3
Identify the cellular modification that overcomes hybrid sterility.
A chromosome doubling event (somatic non-disjunction or unreduced gamete fusion) takes place.
Doubling every chromosome provides an identical sister homologue for pairing during meiosis.
4
Conclude the final evolutionary outcome of the polyploid lineage.
Meiotic stability and fertility are achieved, establishing a novel, reproductively isolated species.
The newly formed polyploid cannot successfully backcross with either diploid parent, completing sympatric speciation.

Anahtar Kavram

Allopolyploid Speciation
Tahmini Süre:1m 30s
Soru 578Soru →

Consider the following three representative poikilothermic vertebrate species: *Agama agama* (rainbow lizard), *Tilapia zillii* (redbelly tilapia), and *Bufo regularis* (African toad). What is the correct sequence of these organisms when arranged in order of increasing structural complexity of their heart and circulatory system?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct evolutionary order of cardiac structural complexity is *Tilapia zillii* (Pisces), followed by *Bufo regularis* (Amphibia), and finally *Agama agama* (Reptilia).
The correct sequence follows the evolutionary advancement of the circulatory system across poikilothermic classes: Class Pisces (*Tilapia zillii*) features a simple two-chambered heart; Class Amphibia (*Bufo regularis*) possesses a three-chambered heart consisting of two atria and one ventricle; and Class Reptilia (*Agama agama*) displays an advanced three-chambered heart with a partial septum dividing the ventricle, reducing cardiac mixing.

Adım Adım Çözüm

1
Identify the vertebrate class and heart structure for each organism
*Tilapia zillii* belongs to Class Pisces (bony fish) and has a 2-chambered heart. *Bufo regularis* belongs to Class Amphibia and has a 3-chambered heart. *Agama agama* belongs to Class Reptilia and has a 3-chambered heart with a partially partitioned ventricle.
Evolutionary progression in poikilothermic vertebrates advances from 2-chambered single circulation in fish to 3-chambered double circulation in amphibians and partially divided 4-chambered systems in reptiles.
2
Order the organisms based on cardiac chamber separation and efficiency
Fish (*Tilapia zillii*) < Amphibian (*Bufo regularis*) < Reptile (*Agama agama*).
Pisces has no separation of pulmonary and systemic circuits in the heart, Amphibia has separated atria but an undivided ventricle, and Reptilia introduces partial ventricular septation for improved oxygen transport efficiency.

Anahtar Kavram

Evolutionary trends in cardiac anatomy among poikilothermic vertebrate classes (Pisces, Amphibia, Reptilia)
Soru 579Soru →

Arrange the following physiological events in the correct sequence to describe the path of hemolymph through the open circulatory system of an insect (phylum Arthropoda), starting from the initiation of heart contraction.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with the contraction of the dorsal vessel propelling hemolymph forward through the aorta, followed by its release into the head cavity and hemocoel, direct bathing of the tissues and organs, and finally its return to the relaxed dorsal vessel via the ostia.
In arthropods, the open circulatory system operates in a defined directional loop: contraction of the dorsal heart drives hemolymph forward through the aorta into the head cavity and body sinuses (hemocoel). There, hemolymph directly bathes the internal organs before being drawn back into the relaxed heart through lateral ostia.

Adım Adım Çözüm

1
Identify the primary pumping action that initiates blood flow.
The muscular dorsal vessel contracts, driving hemolymph anteriorly into the aorta.
Circulation in insects is powered by peristaltic waves of contraction in the dorsal heart.
2
Determine where hemolymph travels after exiting the vessel.
Hemolymph discharges from the open anterior aorta into the head space and body sinuses (hemocoel).
Arthropods possess open circulatory systems lacking a continuous capillary network.
3
Identify the functional interaction between hemolymph and organs in the hemocoel.
Hemolymph flows backwards through the body, directly bathing visceral organs and tissues.
Direct contact between interstitial fluid and organ membranes allows efficient nutrient and metabolic exchange.
4
Trace the return path of hemolymph back to the heart.
As the dorsal heart relaxes, hemolymph enters the cardiac chambers through lateral openings called ostia.
Ostia contain one-way valves that open during relaxation to refill the vessel.

Anahtar Kavram

Open circulatory system and pathway of hemolymph in Arthropoda
Soru 580Soru →

Arrange the following electromagnetic radiation applications in order of increasing photon energy, starting from the radiation with the lowest energy to the one with the highest energy.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from lowest to highest photon energy is: Radar waves (microwaves), radiant heat (infrared), sterilizing radiation (ultraviolet), and nuclear gamma emissions.
The photon energy of electromagnetic radiation is directly proportional to its frequency (E=hfE = hf). Microwaves have the lowest frequency among the listed types, followed by infrared radiation, then ultraviolet radiation, with gamma rays having the highest frequency and thus the greatest photon energy per photon.

Adım Adım Çözüm

1
Identify the region of the electromagnetic spectrum for each listed application.
Radar waves belong to microwaves; radiant heat corresponds to infrared radiation; sterilization uses ultraviolet light; nuclear emissions are gamma rays.
Connecting applications to their respective spectral regions is required to compare physical properties.
2
Recall the relationship between frequency and photon energy in the electromagnetic spectrum using E=hfE = h f.
Photon energy is directly proportional to frequency (E∝fE \propto f), meaning higher frequency waves carry greater energy per photon.
Understanding quantum photon energy helps determine the correct energy ranking.
3
Order the spectral regions from lowest frequency to highest frequency.
The order of increasing frequency (and energy) is: Microwaves < Infrared < Ultraviolet < Gamma rays.
This matches the physical ordering of the electromagnetic spectrum by increasing frequency.

Anahtar Kavram

Photon energy across the electromagnetic spectrum increases with increasing frequency (E=hfE = h f).
ÖncekiSayfa 29 / 32Sonraki
Tüm alıştırma soruları — JAMB UTME | Examkin