Examkin

Tüm alıştırma soruları

13931 soru

Tüm türler13,931Çoktan seçmeli7,139Doğru / Yanlış771Sayısal1,526Eşleştirme2,583Sıralama631Boşluk doldurma1,223Kısa cevap58
Soru 6161Soru →

In Von Thünen's model of agricultural land use, which of the following farming activities is located in the innermost zone closest to the central market?

Cevabı ve açıklamayı göster

Cevap: Market gardening and dairying

Cevap

Market gardening and dairying is located in the innermost zone closest to the market.
Market gardening and dairying yield highly perishable items like fresh milk and vegetables. To prevent spoilage and reduce transport costs for daily delivery, these intensive farming practices occupy the ring immediately surrounding the central urban market.

Adım Adım Çözüm

1
Determine the main economic principles of Von Thünen's agricultural location model.
Land rent (bid-rent theory) and transportation costs of produce determine land use zoning around an isolated city.
Perishable goods demand high transport frequency and yield high revenue per unit area.
2
Identify which agricultural system produces commodities with the highest perishability.
Market gardening (vegetables/flowers) and dairying (fresh milk) have extremely high perishability.
Proximity to the city center reduces transport time and minimizes product spoilage.

Anahtar Kavram

Von Thünen's Model of Agricultural Land Use
Tahmini Süre:45s
Soru 6162Soru →

During wave refraction along an irregular, indented coastline featuring alternating resistant headlands and weaker rock bays, orthogonal wave energy lines bend as water depth decreases near the shore. Which of the following correctly describes the distribution of wave energy and its resulting geomorphic effect along this coastline?

Cevabı ve açıklamayı göster

Cevap: Wave energy converges on headlands causing intensified erosion, while wave energy diverges within bays leading to sediment deposition.

Cevap

Wave energy converges on headlands causing intensified erosion, while wave energy diverges within bays leading to sediment deposition.
As deep-water waves approach an indented coastline, the section of the wave front off headlands enters shallow water first and slows down due to bottom friction. This causes the wave crests to bend (refract), concentrating wave orthogonals and energy onto the headlands, which drives high rates of hydraulic erosion. Conversely, in the deeper water of bays, the wave energy diverges over a wider area, creating low-energy environment suitable for sediment deposition and beach formation.

Adım Adım Çözüm

1
Analyze the mechanics of wave refraction along an indented coastline.
Waves drag on the shallow seabed in front of headlands first, slowing down while the deeper parts of the wave front in bay areas continue moving faster.
Friction with the sea floor decreases wave speed in shallow water near headlands.
2
Determine the direction of wave orthogonals (energy paths).
Wave rays bend toward the headlands, causing energy lines to converge on headlands and spread out (diverge) inside bays.
Wave refraction redirects wave energy perpendicular to the shoreline contours.
3
Correlate energy concentration with geomorphic coastal features.
Convergence at headlands leads to high-energy destructive wave action (forming cliffs, caves, arches), while divergence in bays results in low-energy constructive wave action (forming beaches).
High energy density accelerates marine erosion, whereas low energy density promotes sediment deposition.

Anahtar Kavram

Wave Refraction and Coastal Energy Distribution
Soru 6163Soru →

A meteorologist at a meteorological station needs to determine the atmospheric pressure of the locality. Which weather instrument should be used for this measurement?

Cevabı ve açıklamayı göster

Cevap: Mercury barometer

Cevap

Mercury barometer
Atmospheric pressure is the force exerted by the weight of the air column above a unit area. It is measured using a mercury barometer or aneroid barometer, expressed in units of millibars (mb) or millimeters of mercury (mmHg).

Adım Adım Çözüm

1
Identify the target weather element from the prompt.
The parameter to measure is atmospheric pressure.
The station objective specifies determining air pressure.
2
Match atmospheric pressure to its standard measuring instrument.
Atmospheric pressure is recorded using a mercury barometer.
Barometers measure the weight per unit area exerted by the atmosphere, typically recorded in millibars (mb).

Anahtar Kavram

Atmospheric Pressure Measurement
Soru 6164Soru →

When traveling from the coastal region of southern Nigeria toward the northern border with Niger Republic, which sequence correctly lists the vegetation zones encountered in order?

Cevabı ve açıklamayı göster

Cevap: Mangrove swamp, Tropical rain forest, Guinea savanna, Sudan savanna, Sahel savanna

Cevap

Mangrove swamp, Tropical rain forest, Guinea savanna, Sudan savanna, Sahel savanna
Nigeria's vegetation belts are governed by a south-to-north rainfall gradient. The high-rainfall coastal area supports Mangrove swamps, succeeded inland by Tropical rain forest, followed progressively by drier grassland belts: Guinea savanna, Sudan savanna, and finally Sahel savanna near the northern border.

Adım Adım Çözüm

1
Identify the primary climatic control on Nigerian vegetation distribution
Annual precipitation and duration of the rainy season decrease steadily along a latitudinal gradient from south to north.
The maritime tropical air mass provides the highest moisture along the southern coast, which weakens progressively inland toward the northern border.
2
Trace the resulting vegetation belts from the southern coast to the far north
The sequence moves from coastal Mangrove swamp → Tropical rain forest → Guinea savanna (middle belt) → Sudan savanna → Sahel savanna (extreme north).
This progression directly corresponds to the decreasing moisture gradient across Nigeria.

Anahtar Kavram

South-to-North Latitudinal Vegetation Zonation in Nigeria
Soru 6165Soru →

Match each Information and Communication Technology (ICT) tool or system listed on the left with its primary commercial function or benefit on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Electronic Funds Transfer (EFT)
Point of Sale (POS) Terminal
Electronic Data Interchange (EDI)
Electronic Commerce (E-Commerce)

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Electronic Funds Transfer (EFT) matches with facilitating direct computer-based movement of financial funds from one bank account to another; Point of Sale (POS) Terminal matches with processing real-time electronic card payments and updating inventory records at merchant checkout counters; Electronic Data Interchange (EDI) matches with automating the standardized transmission of business documents such as invoices and purchase orders between companies; Electronic Commerce (E-Commerce) matches with enabling the buying, selling, and marketing of commercial goods and services over the internet.
Each ICT concept is matched to its direct commercial application: EFT is the system for account-to-account bank transfers; POS terminals handle retail checkouts and instant card processing; EDI automates paperless inter-firm document exchanges; and E-Commerce represents internet-based commercial trading.

Adım Adım Çözüm

1
Analyze Electronic Funds Transfer (EFT).
EFT pertains specifically to banking automation and account-to-account money transfers.
Understanding inter-bank electronic fund processing.
2
Analyze Point of Sale (POS) Terminal.
POS terminals are retail hardware used to scan cards, capture sales data, and manage point-of-purchase transactions.
Identifying merchant electronic checkout technologies.
3
Analyze Electronic Data Interchange (EDI).
EDI standardizes inter-company paperless communication for order forms, invoices, and shipping notices.
Distinguishing structured enterprise document interchange from general web browsing.
4
Analyze Electronic Commerce (E-Commerce).
E-Commerce is the overall commercial model of conducting business transactions over online digital networks.
Defining online commercial trading.

Anahtar Kavram

Core ICT applications and their functional benefits in modern commercial transactions
Soru 6166Soru →

During an urban geography survey of a rapidly expanding metropolitan area, planners observed that low-income residential housing and industrial zones expand outward from the city center in wedge-shaped corridors along major railway lines and highways rather than in continuous concentric rings. Which urban land-use model best explains this spatial growth pattern?

Cevabı ve açıklamayı göster

Cevap: Hoyt's Sector Model, where land-use zones extend outward along transport routes in sectorial wedges.

Cevap

Hoyt's Sector Model, which explains urban expansion in wedge-shaped zones along transportation corridors.
Hoyt's Sector Model specifically accounts for city expansion along major transportation corridors like rail lines and highways. As cities grow, activities expand outward in wedge-shaped sectors radiating from the Central Business District along these transit axes.

Adım Adım Çözüm

1
Analyze the observed urban spatial pattern described in the stem.
Identified that land uses (low-income housing and industry) extend outward along major transportation arteries (railways and highways) in wedge shapes.
Understanding the physical layout and axis of growth is key to matching the correct urban land-use theory.
2
Compare the observed pattern against classical urban land-use models.
Homer Hoyt (1939) developed the Sector Model, which modifies Burgess's concentric circle theory by demonstrating that high-rent and industrial zones grow along radial transit routes.
Burgess proposed concentric rings, whereas Harris and Ullman proposed multiple independent nuclei. Hoyt specifically emphasized transport axes.

Anahtar Kavram

Hoyt's Sector Model of Urban Land Use
Tahmini Süre:1m 0s
Soru 6167Soru →

The draft Trading Account of Kalu Enterprises showed the following balances at year-end:

- Opening Inventory: ₦40,000
- Purchases: ₦250,000
- Carriage Inwards: ₦10,000
- Sales: ₦400,000
- Closing Inventory: ₦45,000

It was later discovered that goods costing ₦15,000 withdrawn by the owner for personal use had been incorrectly credited to the Sales Account at their selling price of ₦20,000. What is the corrected gross profit for the year?

Cevabı ve açıklamayı göster

Cevap: ₦140,000

Cevap

₦140,000
To determine the corrected gross profit, two rectifications are required. First, the selling price of ₦20,000 must be deducted from Sales, resulting in corrected Sales of ₦380,000. Second, the cost price of ₦15,000 must be deducted from Purchases, resulting in corrected Purchases of ₦235,000. Adding Opening Inventory (₦40,000) and Carriage Inwards (₦10,000) to corrected Purchases (₦235,000) and subtracting Closing Inventory (₦45,000) gives a Cost of Goods Sold of ₦240,000. Subtracting ₦240,000 from ₦380,000 yields the correct gross profit of ₦140,000.

Adım Adım Çözüm

1
Adjust Sales to eliminate the incorrect entry
Corrected Sales = ₦400,000 - ₦20,000 = ₦380,000
Goods taken for personal use do not constitute business sales and must be removed from the Sales Account.
2
Adjust Purchases for goods withdrawn at cost price
Corrected Purchases = ₦250,000 - ₦15,000 = ₦235,000
Goods withdrawn by the owner must be recorded at cost price by reducing Purchases.
3
Compute the Cost of Goods Sold (COGS)
COGS = Opening Inventory (₦40,000) + Carriage Inwards (₦10,000) + Corrected Purchases (₦235,000) - Closing Inventory (₦45,000) = ₦240,000
Cost of Goods Sold includes carriage inwards and reflects net purchases.
4
Calculate corrected Gross Profit
Gross Profit = ₦380,000 - ₦240,000 = ₦140,000
Gross profit is calculated as Corrected Sales minus Cost of Goods Sold.

Anahtar Kavram

Accounting treatment for goods withdrawn by owner misclassified as sales
Tahmini Süre:2m 0s
Soru 6168Soru →

Arrange the following sequential stages in the integrated manufacturing of structural steel at the Ajaokuta Iron and Steel Complex in Nigeria, starting from raw material preparation to the output of finished industrial goods.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct operational sequence begins with the beneficiation of raw iron ore at Itakpe, followed by sinter and coke blend preparation, blast furnace reduction to produce molten pig iron, converter decarburization to refine liquid steel, and finally continuous casting and hot rolling into structural steel products.
The manufacturing process of integrated steel production at Ajaokuta follows a strict chemical and physical progression: Upstream raw material upgrading (iron ore beneficiation at Itakpe) -> Feed agglomeration and fuel preparation (sintering and coke baking) -> Primary chemical reduction (blast furnace smelting of pig iron) -> Secondary metallurgical refining (decarburization in the basic oxygen converter) -> Physical shaping (continuous casting and hot-rolling into finished structural sections).

Adım Adım Çözüm

1
Identify the primary raw material extraction and concentration phase.
Raw iron ore from Itakpe requires beneficiation first to achieve the required purity for blast furnace smelting.
Unrefined ore contains silica gangue that reduces furnace thermal efficiency if not removed upstream.
2
Determine the burden preparation process.
Concentrated ore is sintered and paired with metallurgical coke derived from coking coal.
Blast furnaces require porous sinter and strong coke to allow gas permeability and thermal reduction.
3
Sequence the primary smelting operation.
The burden is fed into the blast furnace to yield molten pig iron.
Blast furnace reduction converts iron oxides into high-carbon liquid iron.
4
Identify the steel refining stage.
Molten pig iron is transferred to the basic oxygen furnace for decarburization.
Pig iron is too brittle for structural use due to high carbon content (>4%>4\%), requiring oxygen blowing to reduce carbon levels to steel specifications.
5
Establish the final milling and forming stage.
Refined liquid steel is cast into billets and rolled into merchant bars and wire rods.
Mechanical deformation in rolling mills imparts final structural strength and dimensions to the commercial steel products.

Anahtar Kavram

Sequential processing stages of integrated heavy industry in Nigeria (Ajaokuta Steel Complex)
Tahmini Süre:2m 0s
Soru 6169Soru →

A geographic survey of a rapidly expanding metropolitan area shows that manufacturing industries and low-income informal settlements have developed outward in linear wedges along major railway lines and highways radiating from the city center. Which urban land-use model best accounts for this wedge-shaped growth along transportation arteries, and what primarily drives low-income populations to occupy these specific corridors?

Cevabı ve açıklamayı göster

Cevap: Hoyt's Sector Model, because low-income residents seek affordable land and proximity to industrial employment along transport routes despite environmental disamenities.

Cevap

Hoyt's Sector Model, because low-income residents seek affordable land and proximity to industrial employment along transport routes despite environmental disamenities.
The correct option identifies Hoyt's Sector Model, which explains how cities grow in wedge-shaped sectors along major transportation routes such as rail lines and arterial roads. Low-income workers often concentrate in sectors adjacent to industrial zones along these routes due to cheaper land and proximity to factory employment.

Adım Adım Çözüm

1
Analyze the spatial growth pattern described in the scenario.
The growth is characterized by wedge-shaped sectors expanding outward from the city center along railway lines and highways.
Identifying the spatial structure (linear/wedge-shaped along transit corridors vs. concentric rings or multi-nodal clusters) isolates the applicable urban land-use theory.
2
Match the observed spatial structure to classic urban land-use models.
Homer Hoyt's Sector Model (1939) specifically describes land-use zones expanding along transport routes in radial sectors rather than uniform concentric rings.
Transport routes lower accessibility costs for industries, causing industrial and low-income residential sectors to align along these arteries.
3
Evaluate the socio-economic driver for low-income settlement location along transport axes.
Low-income populations settle near industrial corridors because land values are lower due to industrial noise/pollution, and proximity to transportation offers critical job accessibility.
Economic marginalization forces low-income residents to trade off environmental quality for affordability and job proximity.

Anahtar Kavram

Hoyt's Sector Model and Urban Land-Use Dynamics
Tahmini Süre:2m 0s
Soru 6170Soru →

Ade and Femi are partners in a business sharing profits and losses in the ratio 3:23:2. The partnership agreement specifies that the firm maintains fixed capital accounts. On 1st January 2025, Ade's capital account balance was ₦1,200,000\text{₦}1,200,000 and his current account had a credit balance of ₦150,000\text{₦}150,000.

During the year ended 31st December 2025, the following transactions occurred:
- Interest on capital is allowed at 5%5\% per annum on opening capital balances.
- Ade is entitled to an annual partner salary of ₦200,000\text{₦}200,000.
- Ade made total drawings of ₦180,000\text{₦}180,000 during the year.
- Interest charged on Ade's drawings was ₦10,000\text{₦}10,000.
- The net profit available for distribution (divisible profit) was ₦750,000\text{₦}750,000.

What is the balance on Ade's current account as at 31st December 2025?

Cevabı ve açıklamayı göster

Cevap: ₦670,000 credit

Cevap

₦670,000 credit
Under the fixed capital account system, fixed capital accounts remain unaltered while routine transactions (interest on capital, salaries, share of profit, drawings, and interest on drawings) pass through the current account. Crediting the opening balance (₦150,000), interest on capital (₦60,000), salary (₦200,000), and profit share (₦450,000) gives total credits of ₦860,000. Subtracting the debits for drawings (₦180,000) and interest on drawings (₦10,000) leaves a closing credit balance of ₦670,000.

Adım Adım Çözüm

1
Calculate Ade's entitlements credited to his Current Account
Interest on Capital: 5%×₦1,200,000=₦60,0005\% \times \text{₦}1,200,000 = \text{₦}60,000; Salary: ₦200,000\text{₦}200,000; Profit Share: 35×₦750,000=₦450,000\frac{3}{5} \times \text{₦}750,000 = \text{₦}450,000.
Under the fixed capital account system, partner appropriations such as salary, interest on capital, and share of profit are credited to the partner's current account.
2
Sum total credit items in Ade's Current Account
Opening Balance (Credit) + Interest on Capital + Salary + Share of Profit = ₦150,000+₦60,000+₦200,000+₦450,000=₦860,000\text{₦}150,000 + \text{₦}60,000 + \text{₦}200,000 + \text{₦}450,000 = \text{₦}860,000.
All additions to a partner's current account increase the credit side of the account.
3
Calculate total debit items in Ade's Current Account
Drawings + Interest on Drawings = ₦180,000+₦10,000=₦190,000\text{₦}180,000 + \text{₦}10,000 = \text{₦}190,000.
Drawings and interest on drawings reduce the partner's equity in the business and are debited to the current account.
4
Determine the net ending balance of the Current Account
Total Credits - Total Debits = ₦860,000−₦190,000=₦670,000 credit\text{₦}860,000 - \text{₦}190,000 = \text{₦}670,000\text{ credit}.
Subtracting total debits from total credits yields the net credit balance at year-end.

Anahtar Kavram

Fixed Capital Account System in Partnership Accounting
Tahmini Süre:2m 0s
Soru 6171Soru →

A trader settled a debt of ₦150,000\text{₦}150,000 owed to a supplier after receiving a trade discount of 10%10\% and a cash discount of 5%5\% for prompt payment by cheque. What amount will be entered in the bank column on the credit side of the trader's three-column cash book?

Cevabı ve açıklamayı göster

Cevap: ₦128,250\text{₦}128,250

Cevap

The amount entered in the bank column on the credit side is ₦128,250\text{₦}128,250.
Trade discounts are deducted prior to accounting entry and do not appear in the cash book. The net invoice price is ₦135,000\text{₦}135,000. The 5%5\% cash discount earned is calculated on ₦135,000\text{₦}135,000, which gives ₦6,750\text{₦}6,750. The actual cheque paid and entered in the bank column on the credit side is ₦135,000−₦6,750=₦128,250\text{₦}135,000 - \text{₦}6,750 = \text{₦}128,250.

Adım Adım Çözüm

1
Calculate the net invoice price after deducting trade discount.
Trade discount = 10%×₦150,000=₦15,00010\% \times \text{₦}150,000 = \text{₦}15,000. Net invoice amount = ₦150,000−₦15,000=₦135,000\text{₦}150,000 - \text{₦}15,000 = \text{₦}135,000.
Trade discount is deducted immediately on the invoice and is not recorded in the cash book.
2
Calculate the cash discount on the net invoice price.
Cash discount = 5%×₦135,000=₦6,7505\% \times \text{₦}135,000 = \text{₦}6,750.
Cash discount for prompt payment is calculated on the net amount billed.
3
Determine the net cash/cheque paid for entry in the bank column.
Net cheque payment = ₦135,000−₦6,750=₦128,250\text{₦}135,000 - \text{₦}6,750 = \text{₦}128,250.
The net amount paid by cheque is entered in the bank column, while ₦6,750\text{₦}6,750 is entered in the discount received column.

Anahtar Kavram

Calculation and recording of cash discount versus trade discount in the three-column cash book.
Soru 6172Soru →

Which of the following natural resources found in West Africa is classified as a non-renewable resource?

Cevabı ve açıklamayı göster

Cevap: Crude oil

Cevap

Crude oil is a non-renewable resource because it takes millions of years to form and cannot be naturally replenished within a human timeframe.
Crude oil is a non-renewable resource because its reserves are finite and take millions of years of geological processing to form, making human consumption far faster than natural replacement.

Adım Adım Çözüm

1
Define non-renewable natural resources
Non-renewable resources exist in finite quantities and are depleted much faster than natural geological processes can replace them.
Understanding the fundamental definition distinguishes exhaustible resources from continuous energy sources.
2
Classify the given options based on rate of replenishment
Solar radiation, hydroelectric energy, and wind power are naturally replenished continuously, whereas crude oil deposits are finite fossil reserves.
Crude oil formation requires millions of years under high pressure and temperature, rendering its supply exhaustible.

Anahtar Kavram

Classification of Natural Resources into Renewable and Non-Renewable Types
Tahmini Süre:45s
Soru 6173Soru →

Match each international trade term on the left with its corresponding definition or example on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Visible Trade
Invisible Trade
Customs Union
Trade Embargo

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Visible Trade matches physical commodity exports/imports; Invisible Trade matches international service exchanges; Customs Union matches member free trade with a shared external tariff; Trade Embargo matches an official trade ban.
Visible trade represents physical merchandise transactions. Invisible trade represents cross-border service payments. A customs union combines internal free trade with a common tariff on external goods. A trade embargo completely restricts trading activities with a specific nation.

Adım Adım Çözüm

1
Distinguish between tangible goods and services in trade.
Visible trade deals with physical merchandise like cocoa and crude oil, while invisible trade deals with services like banking and tourism.
Physical items can be visually inspected at ports (visible), whereas services are non-physical (invisible).
2
Identify regional trade integration structures and commercial restrictions.
A customs union establishes internal free trade with a common external tariff, while an embargo bans trade entirely.
Economic groupings aim to facilitate regional commerce under agreed tariff structures, whereas embargoes act as severe trade sanctions.

Anahtar Kavram

Fundamental Concepts and Policy Instruments of International Trade
Soru 6174Soru →

Kolawole Traders maintains control accounts for its ledgers. On 31st December 2025, the balance on the Sales Ledger Control Account before adjustments was N185,000\text{N}185,000 (debit). A contra entry of N14,000\text{N}14,000 is to be set off between a customer's account in the sales ledger and their creditor account in the purchases ledger. What is the revised balance of the Sales Ledger Control Account after posting this set-off?

Cevabı ve açıklamayı göster

Cevap: N171,000\text{N}171,000 debit

Cevap

N171,000\text{N}171,000 debit
A contra entry (set-off) reduces both trade debtors and trade creditors. To record a set-off in the control accounts, the Sales Ledger Control Account is credited and the Purchases Ledger Control Account is debited. Deducting the N14,000\text{N}14,000 credit set-off from the opening debit balance of N185,000\text{N}185,000 results in a revised balance of N171,000\text{N}171,000 debit.

Adım Adım Çözüm

1
Determine the double entry rule for a contra entry between control accounts
Debit Purchases Ledger Control Account and Credit Sales Ledger Control Account by N14,000\text{N}14,000.
A set-off reduces total debtors and total creditors simultaneously. Therefore, the Sales Ledger Control Account must be credited.
2
Calculate the adjusted balance on the Sales Ledger Control Account
N185,000 (debit)−N14,000 (credit)=N171,000 (debit)\text{N}185,000 \text{ (debit)} - \text{N}14,000 \text{ (credit)} = \text{N}171,000 \text{ (debit)}
Crediting a debit-balance account reduces the balance.

Anahtar Kavram

Accounting treatment of contra entries in control accounts
Tahmini Süre:1m 30s
Soru 6175Soru →

On a topographical map drawn to a scale of 1:50,0001:50,000, a road ascends continuously from a contour elevation of 200 m200\text{ m} to 450 m450\text{ m}. If the distance along the road measured on the map is 5.0 cm5.0\text{ cm}, what is the average gradient of the road?

Cevabı ve açıklamayı göster

Cevap: 1 in 101\text{ in }10

Cevap

The average gradient of the road is 1 in 101\text{ in }10.
To find the gradient, first compute the Vertical Interval (V.I.) as the difference between the two contour elevations: 450 m−200 m=250 m450\text{ m} - 200\text{ m} = 250\text{ m}. Next, determine the Horizontal Equivalent (H.E.) on the ground by converting the map distance using the scale: 5.0 cm×50,000=250,000 cm=2,500 m5.0\text{ cm} \times 50,000 = 250,000\text{ cm} = 2,500\text{ m}. Dividing the V.I. by the H.E. gives 2502,500=110\frac{250}{2,500} = \frac{1}{10}, which expresses an average gradient of 1 in 101\text{ in }10.

Adım Adım Çözüm

1
Calculate the Vertical Interval (V.I.)
V.I.=450 m−200 m=250 m\text{V.I.} = 450\text{ m} - 200\text{ m} = 250\text{ m}
The Vertical Interval is the difference in height between the upper and lower contour elevations.
2
Calculate the Horizontal Equivalent (H.E.) in ground distance
H.E.=5.0 cm×50,000=250,000 cm=2,500 m\text{H.E.} = 5.0\text{ cm} \times 50,000 = 250,000\text{ cm} = 2,500\text{ m}
The map scale of 1:50,0001:50,000 means 1 cm1\text{ cm} on the map represents 50,000 cm50,000\text{ cm} (500 m500\text{ m}) on the ground.
3
Calculate the Gradient ratio
Gradient=V.I.H.E.=250 m2,500 m=110=1 in 10\text{Gradient} = \frac{\text{V.I.}}{\text{H.E.}} = \frac{250\text{ m}}{2,500\text{ m}} = \frac{1}{10} = 1\text{ in }10
Topographic gradient is defined as the ratio of Vertical Interval to Horizontal Equivalent expressed in the same unit.

Anahtar Kavram

Calculating Topographic Gradient from Contour Lines and Map Scale
Tahmini Süre:1m 30s
Soru 6176Soru →

Match each pedogenic process involved in soil profile formation on the left with its corresponding chemical characteristic and profile manifestation on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Podsolization
Lateritization (Ferrallitisation)
Calcification
Gleization

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Podsolization matches with intense leaching producing an ash-grey silica-rich E horizon. Lateritization matches with silica removal yielding reddish iron and aluminum sesquioxide accumulation. Calcification matches with precipitation of calcium carbonate in subsoil under moisture deficit. Gleization matches with anaerobic reduction of ferric iron into a bluish-grey reduced horizon.
Each pedogenic process corresponds directly to its specific climatic, vegetation, and biochemical mechanism: podsolization forms ash-grey leached upper horizons under cool coniferous litter; lateritization concentrates red sesquioxides via tropical desilication; calcification precipitates calcium carbonates in semi-arid subsoils; and gleization reduces iron under anaerobic waterlogged conditions to give a bluish-grey horizon.

Adım Adım Çözüm

1
Analyze Podsolization
Identified as typical of boreal coniferous forests producing acidic chelation and ash-grey eluvial horizons.
Acid mor humus mobilizes sesquioxides downwards, leaving quartz-rich E horizons.
2
Analyze Lateritization
Identified as humid tropical weathering characterized by desilication.
High temperatures and abundant moisture dissolve silica while leaving insoluble iron and aluminum oxides.
3
Analyze Calcification
Identified as arid/semi-arid pedogenesis where evapotranspiration exceeds rainfall.
Restricted leaching causes calcium carbonate accumulation in horizon B.
4
Analyze Gleization
Identified as hydromorphic pedogenesis in saturated soils.
Lack of oxygen drives microbial reduction of iron from ferric to bluish-grey ferrous state.

Anahtar Kavram

Pedogenic processes controlling soil profile development across global climatic zones.
Soru 6177Soru →

During the formation of a limited liability company, the promoters are required to prepare official documents for registration. Which document specifies the internal rules and regulations governing the duties of directors, voting rights of members, and the conduct of meetings?

Cevabı ve açıklamayı göster

Cevap: Articles of Association

Cevap

Articles of Association
The Articles of Association serve as the internal rulebook of a limited liability company, detailing internal administrative rules such as the appointment and powers of directors, rights of shareholders, and meeting procedures.

Adım Adım Çözüm

1
Identify the purpose of company formation documents
Company registration requires constitutional documents that define both external relationships and internal operations.
Different legal documents serve distinct regulatory functions during incorporation.
2
Distinguish internal regulations from external constitutions and certificates
The document detailing internal administration, administrative powers of directors, calling of meetings, and internal governance is the Articles of Association.
The Memorandum of Association governs external scope and objects, whereas the Articles of Association regulate internal governance.

Anahtar Kavram

Articles of Association vs Memorandum of Association
Tahmini Süre:1m 0s
Soru 6178Soru →

Match each type of statistical map or graphical representation on the left with its most appropriate geographical application on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Choropleth map
Dot map
Flow map
Pie chart

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Choropleth map matches displaying population density using shaded administrative areas; Dot map matches showing absolute spatial distribution of population using point symbols; Flow map matches illustrating volume and direction of cargo or passenger movements; Pie chart matches showing percentage component breakdown of a total statistical value.
Each mapping technique is specifically designed for a particular data format: Choropleth maps represent area-based densities, Dot maps present absolute point distributions, Flow maps display movement volumes, and Pie charts represent percentage proportions of a total.

Adım Adım Çözüm

1
Analyze Choropleth map characteristics
Matches displaying population density using shaded administrative areas
Choropleth maps use graded shading over administrative units to convey continuous density or ratio data.
2
Analyze Dot map characteristics
Matches showing absolute spatial distribution of population using point symbols
Dot maps represent raw numerical quantities distributed spatially using point symbols.
3
Analyze Flow map characteristics
Matches illustrating volume and direction of cargo or passenger movements
Flow diagrams display dynamic movements along paths with width scaled to quantity.
4
Analyze Pie chart characteristics
Matches showing percentage component breakdown of a total statistical value
Pie charts show proportional sub-divisions of 360 degrees corresponding to 100% of a dataset.

Anahtar Kavram

Selection and Functions of Statistical Maps and Diagrams
Soru 6179Soru →

Nigeria is located in West Africa and is defined by specific geographical coordinates. Which of the following correctly describes the latitudinal extent of Nigeria?

Cevabı ve açıklamayı göster

Cevap: 4∘N4^\circ\text{N} to 14∘N14^\circ\text{N}

Cevap

Nigeria extends between latitudes 4∘N4^\circ\text{N} and 14∘N14^\circ\text{N}.
Nigeria is located entirely in the Northern Hemisphere, spanning from latitude 4∘N4^\circ\text{N} at its southern coastal boundary to 14∘N14^\circ\text{N} at its northern boundary near Lake Chad.

Adım Adım Çözüm

1
Identify the geographical coordinate system dimension requested.
The question asks for the latitudinal extent, which measures distance north or south of the Equator.
Distinguishing latitude (north-south) from longitude (east-west) is required to select the correct coordinates.
2
Recall the absolute boundary limits of Nigeria.
Nigeria lies between latitude 4∘N4^\circ\text{N} at the Niger Delta coast and latitude 14∘N14^\circ\text{N} near Lake Chad in the north.
These coordinates define the northern and southern limits of the country.

Anahtar Kavram

Latitudinal Extent of Nigeria
Tahmini Süre:45s
Soru 6180Soru →

Complete the following statement regarding ledger account classification and double-entry principles by providing the correct type of ledger account for each blank.

Aşağıdaki boşlukları doldurun

When office furniture is purchased on credit from Woodworks Ltd, the furniture account is classified as a account, whereas the supplier's account, Woodworks Ltd, is classified as a account.
Cevabı ve açıklamayı göster

Cevap

The furniture account is a real account, and the Woodworks Ltd account is a personal account.
Office furniture represents a tangible property/asset of the business, making it a real account. Woodworks Ltd is a corporate entity (creditor), making its ledger account a personal account.

Adım Adım Çözüm

1
Identify the nature of the furniture account.
Furniture is a tangible asset owned by the business, which falls under real accounts.
Real accounts deal with physical assets and property of the enterprise.
2
Identify the nature of the Woodworks Ltd account.
Woodworks Ltd is a trade creditor (an entity/person to whom money is owed), which falls under personal accounts.
Personal accounts deal with individual persons, firms, or corporate entities.

Anahtar Kavram

Ledger Classification and Double Entry Rules
Tahmini Süre:1m 0s
ÖncekiSayfa 309 / 697Sonraki
Tüm alıştırma soruları — JAMB UTME | Examkin