Tüm alıştırma soruları

13931 soru

Soru 12321Soru

Match each Nigerian vegetation zone listed on the left with its corresponding defining ecological characteristic and indicator flora on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Mangrove Swamp Forest
Northern Guinea Savanna
Sudan Savanna
Montane Vegetation

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Mangrove Swamp Forest pairs with halophytic stilt-rooted trees; Northern Guinea Savanna pairs with fire-resistant thick-barked deciduous trees (Isoberlinia doka); Sudan Savanna pairs with xerophytic thorny trees (acacia and baobab); Montane Vegetation pairs with stunted evergreen cloud-forest scrub and alpine grasses above 1,200 meters.
Vegetation distribution in Nigeria follows both a south-to-north latitudinal rainfall gradient and an altitudinal gradient. Coastal saline environments host stilt-rooted Mangroves. The Northern Guinea belt is dominated by fire-resistant Isoberlinia trees. Drier northern latitudes host xerophytic Sudan Savanna species like Acacia and Baobab. High elevations on plateaus over 1,200m create Montane grass and scrub biomes.

Adım Adım Çözüm

1
Analyze coastal and aquatic vegetation belts
Identify Mangrove Swamp Forest as saline, intertidal, and stilt-rooted with Rhizophora species.
Coastal mangrove swamps require adaptations to daily brackish/saline tidal movements.
2
Examine central savanna woodland belts
Identify Northern Guinea Savanna with Isoberlinia woodland and fire-adapted thick bark.
Annual dry season fires in the Guinea savanna select for pyro-resistant tree species.
3
Examine semi-arid northern savanna belts
Identify Sudan Savanna with xerophytic trees such as Acacia and Baobab.
Low precipitation and high evapotranspiration in the far north favor water-storing and small-leaved thorny species.
4
Examine highland vegetation anomalies
Identify Montane Vegetation with high-elevation turf grass and cloud forest species.
Lapse rate cooling at high altitudes (Jos and Mambilla Plateaus) creates a temperate microclimate distinct from surrounding lowlands.

Anahtar Kavram

Spatial Zonation and Plant Adaptations Across Nigerian Biomes
Soru 12322Soru

A live international cultural event is broadcast from a venue at longitude 15E15^\circ\text{E} starting at 4:00 p.m. local time. What is the local solar time for a viewer watching the live broadcast at longitude 45W45^\circ\text{W}?

Cevabı ve açıklamayı göster

Cevap: 12:00 p.m. (noon)

Cevap

12:00 p.m. (noon)
To find local solar time at 45W45^\circ\text{W} relative to 15E15^\circ\text{E}, calculate the total angular separation (15+45=6015^\circ + 45^\circ = 60^\circ). Dividing by 1515^\circ per hour yields a 4-hour difference. Because 45W45^\circ\text{W} lies to the west of 15E15^\circ\text{E}, subtract 4 hours from 4:00 p.m., resulting in 12:00 p.m. (noon).

Adım Adım Çözüm

1
Calculate total longitudinal difference between the two locations.
Since 15E15^\circ\text{E} and 45W45^\circ\text{W} are in opposite hemispheres relative to the Greenwich Meridian, add the values: 15+45=6015^\circ + 45^\circ = 60^\circ.
Longitudes in opposite eastern and western hemispheres must be summed to find total angular distance.
2
Convert longitudinal difference into time difference using the rate of Earth rotation (15=1 hour15^\circ = 1\text{ hour}).
6015/hr=4 hours\frac{60^\circ}{15^\circ/\text{hr}} = 4\text{ hours}.
The Earth rotates 360360^\circ in 24 hours, which corresponds to 1515^\circ per hour.
3
Determine local time by applying the directional rule (East gain, West lose).
4:00 p.m.4 hours=12:00 p.m. (noon)4:00\text{ p.m.} - 4\text{ hours} = 12:00\text{ p.m. (noon)}.
The target location (45W45^\circ\text{W}) is west of the broadcasting venue (15E15^\circ\text{E}), so the time difference must be subtracted.

Anahtar Kavram

Longitude, Earth Rotation, and Local Time Calculation
Soru 12323Soru

Which of the following drainage basins in Nigeria is unique for forming an inland drainage system, where rivers flow inland into a lake rather than discharging directly or indirectly into the Atlantic Ocean?

Cevabı ve açıklamayı göster

Cevap: The Chad Basin

Cevap

The Chad Basin is the major inland drainage system in Nigeria.
The Chad Basin in northeastern Nigeria is an endorheic (inland) basin. Rivers originating from the High Plains of Hausaland and the Jos Plateau (such as the Hadejia, Jama'are, and Komadugu Yobe) flow northeastward into Lake Chad rather than reaching the ocean.

Adım Adım Çözüm

1
Identify the drainage destination of major Nigerian river basins
Most Nigerian rivers belong to the Atlantic drainage system (draining into the Gulf of Guinea via the Niger, Benue, or coastal streams), while rivers in the far northeast drain interiorly.
Geographical relief slopes inward toward the Lake Chad depression in northeastern Nigeria.
2
Determine which basin forms an endorheic (inland) system
The rivers of the Chad Basin, such as the Komadugu Yobe (formed by the Hadejia and Jama'are rivers), drain inland into Lake Chad without an outlet to the sea.
An inland drainage basin is defined by water flows terminating in an inland lake or sink rather than reaching an ocean.

Anahtar Kavram

Inland Drainage Systems of Nigeria
Soru 12324Soru

Match each rock type in Column I with its corresponding formation characteristic or economic importance in Column II.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Marble
Coal
Basalt

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Marble corresponds to the metamorphic rock formed from limestone used for decorative building; Coal corresponds to the organically formed sedimentary rock used as an energy fuel source; Basalt corresponds to the extrusive igneous rock formed by rapid cooling of lava.
Marble matches the metamorphic rock derived from limestone; Coal matches the organically accumulated sedimentary rock; Basalt matches the extrusive igneous rock formed from surface lava cooling.

Adım Adım Çözüm

1
Examine Marble's origin and characteristics
Marble is a metamorphic rock formed by heat and pressure acting on limestone (parent rock).
Metamorphic processes alter pre-existing rocks without melting them.
2
Examine Coal's origin and characteristics
Coal is formed from dead vegetative matter in swampy environments, making it an organic sedimentary rock.
Sedimentary rocks can be formed mechanically, chemically, or organically.
3
Examine Basalt's origin and characteristics
Basalt cools rapidly from erupted lava on the Earth's surface, making it fine-grained and extrusive igneous.
Igneous rocks formed outside the Earth's crust are extrusive or volcanic.

Anahtar Kavram

Classification of major rock types, their formation processes, and economic applications
Soru 12325Soru

Carbonation is a primary chemical weathering process that degrades limestone landscapes. What is the correct chronological sequence of steps involved in carbonation, from the initial formation of acidic rainwater to the final removal of dissolved rock materials?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with carbon dioxide dissolving in rainwater to form carbonic acid, followed by acidic rainwater contacting limestone, chemical reaction forming soluble calcium bicarbonate, and finally the removal of dissolved calcium bicarbonate in solution by water.
Carbonation begins when carbon dioxide dissolves in rainwater to form weak carbonic acid. When this acidic rainwater contacts limestone, it converts insoluble calcium carbonate into soluble calcium bicarbonate, which is subsequently washed away in solution by moving water.

Adım Adım Çözüm

1
Identify the initial chemical reaction in the atmosphere.
Rainwater absorbs carbon dioxide to form weak carbonic acid (CO2+H2OH2CO3CO_2 + H_2O \rightarrow H_2CO_3).
Chemical weathering cannot begin until the chemical weathering agent is synthesized in precipitation.
2
Trace the movement of the acid solution onto rock surfaces.
Acidic rainwater flows along limestone joints and bedding planes.
The acid must infiltrate the rock structure to react with calcium carbonate minerals.
3
Determine the chemical conversion of the rock mineral.
Carbonic acid reacts with calcium carbonate to form soluble calcium bicarbonate (CaCO3+H2CO3Ca(HCO3)2CaCO_3 + H_2CO_3 \rightarrow Ca(HCO_3)_2).
Insoluble rock material is converted into a dissolved compound.
4
Identify the final removal of dissolved material.
Groundwater washes away dissolved calcium bicarbonate in solution.
Continuous removal of soluble minerals enlarges joints, producing caves and karst features.

Anahtar Kavram

Chemical weathering of limestone via carbonation
Tahmini Süre:1m 0s
Soru 12326Soru

Arrange the following major African landforms in order of their geographical position, from the northernmost feature to the southernmost feature.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

Atlas Mountains → Tibesti Massif → Ethiopian Highlands → Drakensberg Range
The correct sequence places the Atlas Mountains first as they form the northern rim of Africa in the Maghreb. The Tibesti Massif comes next in the central Sahara. The Ethiopian Highlands follow further south in the Horn of Africa, and the Drakensberg Range is last as it forms the high escarpment of Southern Africa.

Adım Adım Çözüm

1
Identify the geographical region and latitude of each landform
Atlas Mountains lie in North-Western Africa (approx. 32°N); Tibesti Massif lies in the Sahara of Chad (approx. 20°N); Ethiopian Highlands lie in East Africa (approx. 9°N); Drakensberg Range lies in Southern Africa (approx. 29°S).
Establishing absolute latitudinal positions allows for accurate north-to-south sequencing.
2
Sequence the features from north to south
1st: Atlas Mountains (North Africa), 2nd: Tibesti Massif (Sahara/Central-North), 3rd: Ethiopian Highlands (East Africa), 4th: Drakensberg Range (Southern Africa).
This places the landforms in correct descending latitudinal order across the African continent.

Anahtar Kavram

Latitudinal and spatial distribution of major African relief features
Soru 12327Soru

Match each of the following major African physical landforms with its primary tectonic origin and structural formation process.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Atlas Mountains
Ruwenzori Mountains
Ethiopian Plateau
Ahaggar Massif

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Atlas Mountains pair with orogenic folding from African-Eurasian plate collision; Ruwenzori Mountains pair with horst block uplift along the rift valley; Ethiopian Plateau pairs with flood basalt accumulation over a mantle swell; Ahaggar Massif pairs with intraplate volcanism on an uplifted cratonic dome.
Each major African landform corresponds to a distinct tectonic origin: the Atlas Mountains were formed by compressional folding during the collision of the African and Eurasian plates; the Ruwenzori Mountains represent a non-volcanic horst block uplifted along rift faults; the Ethiopian Plateau was formed by extensive flood basalt volcanism over a mantle plume swell; and the Ahaggar Massif is an intraplate volcanic capping on an epeirogenically uplifted Saharan basement dome.

Adım Adım Çözüm

1
Determine the formation process of the Atlas Mountains system
Identify the Atlas Range as a young fold mountain belt produced at a convergent plate boundary.
Compressional tectonic stresses during the Alpine orogeny folded thick sedimentary strata along Africa's northern margin.
2
Analyze the structural mechanism of the Ruwenzori Range
Classify Ruwenzori as a crystalline horst block rather than a volcanic edifice.
Tensional stresses along the Albertine Rift caused vertical block-faulting, lifting ancient Precambrian metamorphic rock above the surrounding grabens.
3
Evaluate the geological composition of the Ethiopian Plateau
Link the high plateau to massive trap basalt volcanism.
Mantle plume upwelling elevated the Horn of Africa and triggered continental flood basalt eruptions that built up thick lava sheets.
4
Identify the origin of Saharan interior massifs such as the Ahaggar
Recognize the combination of epeirogenic doming and secondary intraplate volcanic activity.
Slow upward warping of the African continental shield exposed basement rocks, which were subsequently modified by volcanic extrusions.

Anahtar Kavram

Geological Origins and Tectonic Classification of African Landforms
Soru 12328Soru

Arrange the following major urban nodes along Nigeria's Western Railway corridor in geographical sequence, starting from the southern coastal terminus and proceeding northwards to the interior northern terminus:

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from south to north along the Western Railway corridor is Lagos (Apapa), Ibadan, Jebba, and Kano.
Nigeria's Western Railway corridor stretches from the coast to the northern interior. Starting at the coastal terminus in Lagos (Apapa), it moves north through the major southwestern city of Ibadan, crosses the River Niger at Jebba in the Middle Belt, and ends at Kano in the far north.

Adım Adım Çözüm

1
Identify the coastal starting point of the Western Railway trunk line.
Lagos (Apapa) serves as the southernmost coastal port terminus.
The line was constructed to evacuate agricultural and mineral products from the interior to the Lagos seaport.
2
Trace the route inland through the southwestern region and Middle Belt crossing.
The rail proceeds north through Ibadan (southwest) and continues to Jebba (Middle Belt).
Jebba is the key geographical bridging node over the River Niger north of Ibadan.
3
Identify the final northern terminus of the line.
Kano is reached as the final major northern rail station.
Kano served as the central collecting center for northern export trade goods such as groundnuts and hides.

Anahtar Kavram

Spatial arrangement and node sequence of Nigeria's Western Railway transport corridor.
Tahmini Süre:1m 30s
Soru 12329Soru

Place the following operational stages of timber export logistics from inland forest concessions in Central Africa to overseas markets in the correct chronological sequence from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from first to last is: Felling timber trees and clearing branches at the forest concession site → Transporting heavy logs via river floating or rail lines toward coastal ports → Inspecting, grading, and sorting logs at coastal port timber yards → Loading sorted logs onto ocean cargo vessels for overseas shipment.
The sequence follows the physical flow of commercial lumbering in Equatorial Africa: tree harvesting occurs first in interior forest concessions, followed by long-distance transport down river systems or railways to coastal ports, then quality sorting and inspection at port yards, ending with ocean freighter loading for international trade.

Adım Adım Çözüm

1
Identify the primary extraction phase in the forest.
Standing trees are felled and trimmed into manageable log lengths in interior forest concessions.
Physical harvest is the essential starting point of all forestry operations.
2
Determine the transport phase from interior concessions to the coast.
Logs are moved along waterways (river floating/rafting) or heavy logging rail routes towards maritime outlets.
Inland transport bridges the distance between remote rainforests and coastal industrial ports.
3
Identify the port handling and evaluation phase.
Logs reaching port yards undergo official inspection, volume measurement, and quality classification.
Customs clearance and quality grading are required before commercial international shipping.
4
Determine the final export loading phase.
Graded logs are loaded onto ocean freighter ships bound for international buyer destinations.
Ocean vessel loading concludes the export logistics workflow.

Anahtar Kavram

Timber Export Logistics and Transport Stages in Central Africa
Soru 12330Soru

On a topographical map with a scale of 1:50,0001 : 50,000, Point X lies on a hilltop at an elevation of 420 m420\text{ m}, while Point Y sits near a stream bed at an elevation of 170 m170\text{ m}. If the measured distance between Point X and Point Y on the map is 12.5 cm12.5\text{ cm}, calculate the slope gradient between the two points. Express your answer as the value of NN in the standard gradient ratio 1:N1 : N (or 1 in N1 \text{ in } N). What is the value of NN?

Cevabı ve açıklamayı göster

Cevap: 25

Cevap

The denominator N in the gradient ratio 1 : N is 25.
The vertical interval (V.I.) between the hilltop at 420 m420\text{ m} and the stream at 170 m170\text{ m} is 250 m250\text{ m}. The horizontal equivalent (H.E.) on the ground is calculated by multiplying the map distance of 12.5 cm12.5\text{ cm} by the map scale factor of 50,00050,000, which gives 625,000 cm625,000\text{ cm} (6,250 m6,250\text{ m}). Dividing V.I. by H.E. yields 250/6,250=1/25250 / 6,250 = 1 / 25. Thus, the gradient ratio is 1:251 : 25, making N=25N = 25.

Adım Adım Çözüm

1
Calculate Vertical Interval (V.I.)
V.I. = 420 m - 170 m = 250 m
Vertical interval is the difference in height between the highest and lowest points.
2
Convert map distance to ground distance to determine Horizontal Equivalent (H.E.) in meters
H.E. = 12.5 cm × 50,000 = 625,000 cm = 6,250 m
Horizontal equivalent must be in the same units as the vertical interval before computing ratio.
3
Divide V.I. by H.E. to express the gradient as a ratio 1 : N
Gradient = 250 / 6,250 = 1 / 25
Simplifying the fraction V.I. / H.E. yields 1 / 25, giving N = 25.

Anahtar Kavram

Slope and Gradient Calculation
Soru 12331Soru

A county boundary encloses an area of 72 cm272\text{ cm}^2 on Map A, which is drawn at a scale of 1:20,0001 : 20,000. Map A is reduced to produce Map B, which has a Representative Fraction of 1:60,0001 : 60,000. What is the area of the county boundary on Map B?

Cevabı ve açıklamayı göster

Cevap: 8 cm28\text{ cm}^2

Cevap

The area of the county boundary on Map B is 8 cm28\text{ cm}^2.
The linear reduction ratio from a scale of 1:20,0001 : 20,000 to 1:60,0001 : 60,000 is 20,00060,000=13\frac{20,000}{60,000} = \frac{1}{3}. Because area is a two-dimensional quantity, the area scale factor is the square of the linear factor, which is (13)2=19\left(\frac{1}{3}\right)^2 = \frac{1}{9}. Applying this area scale factor to the original map area of 72 cm272\text{ cm}^2 gives 72 cm2×19=8 cm272\text{ cm}^2 \times \frac{1}{9} = 8\text{ cm}^2.

Adım Adım Çözüm

1
Determine the linear scale reduction factor (kk) between Map A and Map B.
k=Scale Denominator of Map AScale Denominator of Map B=20,00060,000=13k = \frac{\text{Scale Denominator of Map A}}{\text{Scale Denominator of Map B}} = \frac{20,000}{60,000} = \frac{1}{3}
Map scale reduction decreases linear dimensions proportionally to the ratio of the original scale denominator to the new scale denominator.
2
Calculate the area scale change factor (k2k^2).
Area Scale Factor=k2=(13)2=19\text{Area Scale Factor} = k^2 = \left(\frac{1}{3}\right)^2 = \frac{1}{9}
Surface area changes according to the square of the linear scale factor.
3
Calculate the new area on Map B using the original map area.
New Area=72 cm2×19=8 cm2\text{New Area} = 72\text{ cm}^2 \times \frac{1}{9} = 8\text{ cm}^2
Multiplying the initial map area by the area scale change factor yields the reduced map area.

Anahtar Kavram

Relationship between linear scale change and area scale change in map reduction
Tahmini Süre:1m 30s
Soru 12332Soru

In Africa's Sudan Savanna climate zone, rainfall is strictly seasonal and concentrated within a single wet season. Which atmospheric mechanism primarily controls the seasonal movement of rainfall across this zone?

Cevabı ve açıklamayı göster

Cevap: The seasonal apparent movement of the Inter-Tropical Convergence Zone (ITCZ)

Cevap

The seasonal apparent movement of the Inter-Tropical Convergence Zone (ITCZ)
The correct answer identifies the seasonal apparent movement of the Inter-Tropical Convergence Zone (ITCZ). The ITCZ is a low-pressure belt where trade winds converge. Its movement northwards following the sun during the Northern Hemisphere summer draws moisture-laden Tropical Maritime air into interior West and Central Africa, producing the characteristic single rainy season of the Sudan Savanna climate zone.

Adım Adım Çözüm

1
Identify the climatic characteristics of the Sudan Savanna zone in Africa.
The Sudan Savanna experiences a tropical continental climate marked by distinct wet and dry seasons.
Rainfall in this zone occurs primarily when warm, humid air masses drawn by low-pressure systems sweep over the continent.
2
Analyze the primary atmospheric driver responsible for shifting rain-bearing air masses across sub-Saharan Africa.
The Inter-Tropical Convergence Zone (ITCZ) follows the apparent movement of the sun, shifting northwards toward the Tropic of Cancer in July and southwards toward the Tropic of Capricorn in January.
As the ITCZ moves north in northern summer, it pulls the rain-bearing Tropical Maritime (mT) air mass deep into the Sudan Savanna zone.

Anahtar Kavram

Inter-Tropical Convergence Zone (ITCZ) and Seasonal Rainfall in Africa
Soru 12333Soru

A wildlife sanctuary covers an area of 36 cm236\text{ cm}^2 on Map X, which is drawn to a scale of 1:40,0001 : 40,000. If the map is reduced to a scale of 1:120,0001 : 120,000, what is the area of the sanctuary on the new map?

Cevabı ve açıklamayı göster

Cevap: 4 cm24\text{ cm}^2

Cevap

The area of the sanctuary on the new map is 4 cm24\text{ cm}^2.
When a map is reduced from a scale of 1:40,0001 : 40,000 to 1:120,0001 : 120,000, the linear dimensions become 40,000120,000=13\frac{40,000}{120,000} = \frac{1}{3} of the original size. Because area is proportional to the square of linear dimensions, the area factor is (13)2=19\left(\frac{1}{3}\right)^2 = \frac{1}{9}. Reducing 36 cm236\text{ cm}^2 by a factor of 9 gives 4 cm24\text{ cm}^2.

Adım Adım Çözüm

1
Determine the linear scale factor of reduction
Linear scale factor k=Old Scale DenominatorNew Scale Denominator=40,000120,000=13k = \frac{\text{Old Scale Denominator}}{\text{New Scale Denominator}} = \frac{40,000}{120,000} = \frac{1}{3}
Going from 1:40,0001 : 40,000 to 1:120,0001 : 120,000 reduces all linear map dimensions to one-third of their original length.
2
Calculate the area scale factor
Area scale factor k2=(13)2=19k^2 = \left(\frac{1}{3}\right)^2 = \frac{1}{9}
Surface area changes proportionally to the square of the linear scale factor.
3
Calculate the new map area
New Area = Original Area ×k2=36 cm2×19=4 cm2\times k^2 = 36\text{ cm}^2 \times \frac{1}{9} = 4\text{ cm}^2
Multiplying the original map area by the area scale factor gives the area on the reduced map.

Anahtar Kavram

Map Reduction and Area Scale Relationship
Tahmini Süre:1m 30s
Soru 12334Soru

During natural radioactive decay, an unstable nucleus can emit a beta-minus (β\beta^-) particle despite the nucleus containing no free electrons. Which of the following mechanisms correctly describes the origin of this emitted particle?

Cevabı ve açıklamayı göster

Cevap: A neutron inside the nucleus transforms into a proton, emitting an electron and an antineutrino.

Cevap

A neutron inside the nucleus transforms into a proton, emitting an electron and an antineutrino.
The emission of a beta-minus particle results from a weak interaction process within an unstable nucleus where a neutron converts into a proton, emitting a high-speed electron (beta particle) and an antineutrino. This preserves total electric charge (0=+110 = +1 - 1) and nucleon number (1=1+01 = 1 + 0).

Adım Adım Çözüm

1
Identify the constituents of the nucleus and the nature of the emitted particle.
The nucleus consists of protons and neutrons, while a beta-minus (β\beta^-) particle is a fast-moving electron (10e^{0}_{-1}e).
Since electrons do not exist as independent bound particles inside the nucleus, the emitted electron must be created during a nuclear transformation.
2
Apply conservation laws (charge and mass number) to determine the nuclear reaction.
01n11p+10e+νˉe^{1}_{0}n \rightarrow ^{1}_{1}p + ^{0}_{-1}e + \bar{\nu}_e
A neutron (01n^{1}_{0}n) decays into a proton (11p^{1}_{1}p), producing a beta particle (10e^{0}_{-1}e) and an antineutrino (νˉe\bar{\nu}_e) to conserve atomic number, mass number, and lepton number.

Anahtar Kavram

Mechanism of Nuclear Beta Decay
Soru 12335Soru

In oil-producing regions such as the Niger Delta of Nigeria, continuous gas flaring releases atmospheric pollutants that trigger acid rain and severe land degradation. Arrange the following stages of acid precipitation and soil degradation in the correct sequential order from initial emission to final soil impact.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with the atmospheric emission of sulfur dioxide and nitrogen oxides from gas flaring, followed by tropospheric oxidation into sulfuric and nitric acids, precipitation of acidic rainwater onto land, and culminates in nutrient cation leaching and aluminum toxicity in soil.
The process follows a logical environmental path: primary pollutant emission from gas flaring (SO2SO_2 and NOxNO_x) \rightarrow tropospheric oxidation to form strong acids (H2SO4H_2SO_4 and HNO3HNO_3) \rightarrow atmospheric acid precipitation \rightarrow geochemical soil disruption via nutrient cation leaching (Ca2+Ca^{2+}, Mg2+Mg^{2+}) and toxic aluminum mobilization (Al3+Al^{3+}).

Adım Adım Çözüm

1
Identify the primary source event of airborne pollutants.
Industrial flaring releases precursor gases (SO2SO_2 and NOxNO_x) directly into the troposphere.
Pollutant emission must precede chemical transformation in the atmosphere.
2
Determine the atmospheric conversion process.
SO2SO_2 and NOxNO_x undergo oxidation in cloud droplets to form H2SO4H_2SO_4 and HNO3HNO_3.
Primary gas emissions react chemically with moisture and sunlight to produce acidic compounds.
3
Trace the pathway of acid deposition onto the earth's surface.
Acidified atmospheric moisture falls as acid rain onto canopy leaves and topsoil.
Precipitation serves as the physical vehicle transporting atmospheric acid aerosols down to terrestrial ecosystems.
4
Analyze the geochemical impact of acid rain on soil degradation.
H+H^+ ion buildup displaces basic nutrients (Ca2+Ca^{2+}, Mg2+Mg^{2+}), causing severe leaching and mobilizing toxic Al3+Al^{3+}.
Acid accumulation in topsoil causes cation exchange imbalances, degrading soil chemistry and plant health.

Anahtar Kavram

Atmospheric acid precipitation and geochemical soil degradation
Tahmini Süre:2m 0s
Soru 12336Soru

Which of the following environmental factors presents the primary physical obstacle to commercial timber exploitation in the tropical rainforests of Central Africa?

Cevabı ve açıklamayı göster

Cevap: The high degree of forest heterogeneity, where commercial species grow widely scattered among non-economic trees

Cevap

The high degree of forest heterogeneity, where commercial species grow widely scattered among non-economic trees
In African equatorial forests, tree species heterogeneity is extremely high. Commercial timber trees such as Mahogany, Sapele, and Obeche do not grow in pure single-species stands, but are instead scattered thinly across dense, mixed forest belts. This spatial dispersion requires timber extractors to cut extensive haulage paths to reach individual trees, forming the main physical hurdle to large-scale commercial lumbering.

Adım Adım Çözüm

1
Examine the species composition of equatorial African forests.
Equatorial forests contain hundreds of different tree species per hectare, meaning trees of a single commercial species rarely occur in pure stands.
This structural heterogeneity requires lumbermen to locate and fell isolated trees across vast areas, raising logging costs.
2
Evaluate and eliminate distractors based on forest taxonomy.
Options mentioning softwoods (pines, spruces) or denying the presence of hardwoods contradict the reality that African rainforests consist of valuable broad-leaved hardwoods.
Confusing tropical hardwoods with softwoods is a major conceptual error in West and Central African forestry geography.

Anahtar Kavram

Challenges of commercial lumbering in African tropical rainforests
Soru 12337Soru

Complete the statement below regarding rural settlement patterns by filling in the blanks with the correct geographical terms.

Aşağıdaki boşlukları doldurun

A rural settlement pattern that develops outward along converging transport routes at a major focal junction is classified as a pattern, whereas buildings arranged in a sequence along a narrow line such as a river bank or road form a pattern.
Cevabı ve açıklamayı göster

Cevap

The first blank is radial (or star-shaped), and the second blank is linear.
A settlement expanding outward along converging transport arteries forms a radial pattern, whereas a settlement aligned sequentially along a linear feature like a river bank or road forms a linear pattern.

Adım Adım Çözüm

1
Analyze the spatial development of settlements expanding outward from a central transport junction.
When roads converge at a central point, new structures build up along each main route leading away from the center, producing a star-like or radial arrangement.
Accessibility along multi-directional roads attracts development directly bordering those transport corridors.
2
Analyze the spatial development of settlements along elongated physical or artificial features.
When dwellings follow the path of a single linear feature such as a coastline, river, or highway, they form a linear pattern.
Topographical constraints or transport alignment restrict growth to a long, narrow strip.

Anahtar Kavram

Spatial classification of rural settlements based on transport routes and physical determinants.
Tahmini Süre:1m 0s
Soru 12338Soru

Match each stage of the Demographic Transition Model in Group I with its corresponding birth/death rate behavior and structural population pyramid profile in Group II.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Stage 1 (High Stationary)
Stage 2 (Early Expanding)
Stage 3 (Late Expanding)
Stage 4 (Low Stationary)

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Stage 1 (High Stationary) matches high birth rate and high fluctuating death rate with near-zero growth; Stage 2 (Early Expanding) matches high birth rate and rapidly falling death rate with high natural increase; Stage 3 (Late Expanding) matches declining birth rate with low death rate causing a narrowing pyramid base; Stage 4 (Low Stationary) matches low birth and death rates producing a beehive or column-shaped pyramid.
Each Demographic Transition Model stage uniquely links demographic vital rates to population pyramid structure: Stage 1 pairs high fluctuating birth/death rates with a concave pyramid; Stage 2 pairs high birth rates and falling death rates with a broad-based expansive pyramid; Stage 3 pairs falling birth rates with a narrowing base; and Stage 4 pairs low birth/death rates with a column or beehive shape.

Adım Adım Çözüm

1
Analyze Stage 1 demographic indicators
Identify that pre-industrial societies (Stage 1) maintain both high birth and high fluctuating death rates, resulting in low net growth and a concave pyramid.
High infant mortality and periodic epidemics offset high crude birth rates.
2
Analyze Stage 2 demographic indicators
Identify that developing health infrastructure drastically lowers Crude Death Rate while Crude Birth Rate remains elevated, causing rapid population growth.
Cultural norms favoring large families persist even after mortality rates decline sharply.
3
Analyze Stage 3 demographic indicators
Identify that urbanization and education lead to lower birth rates, causing the base of the age pyramid to taper relative to middle cohorts.
Increased cost of child-rearing and female literacy lower fertility rates.
4
Analyze Stage 4 demographic indicators
Identify that fully urbanized/industrialized societies equalize low birth and death rates, stabilizing growth into a rectangular profile.
Replacement-level fertility maintains a stable, non-expanding age distribution.

Anahtar Kavram

Demographic Transition Model Stages and Population Pyramid Morphologies
Soru 12339Soru

Match each partnership dissolution transaction on the left to its corresponding double-entry accounting treatment on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Dissolution expenses paid by a partner from personal funds
Transfer of realization loss to partners
Final settlement of a partner's loan account by cash payment
Cash proceeds received from the sale of an unrecorded asset

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

The correct pairings are: Dissolution expenses paid by a partner matches Debit Realization Account and Credit Partner's Capital Account; Transfer of realization loss matches Debit Partners' Capital Accounts and Credit Realization Account; Final settlement of a partner's loan matches Debit Partner's Loan Account and Credit Cash/Bank Account; Cash proceeds from unrecorded asset matches Debit Cash/Bank Account and Credit Realization Account.
Each transaction during dissolution follows specific double-entry rules: expenses paid personally by a partner increase capital liability (Credit Capital, Debit Realization); realization loss reduces partner equity (Debit Capital, Credit Realization); loan discharge reduces cash and loan liability (Debit Loan, Credit Cash); and unrecorded asset proceeds increase cash and realization credits (Debit Cash, Credit Realization).

Adım Adım Çözüm

1
Analyze the treatment of dissolution expenses borne by a partner.
Realization Account is debited and Partner's Capital Account is credited.
The firm recognizes the dissolution cost in the Realization Account and credits the partner for making the payment.
2
Determine the transfer of realization loss.
Partners' Capital Accounts are debited and Realization Account is credited.
Realization losses reduce the partners' capital balances in their agreed profit-sharing ratio.
3
Determine the settlement entry for a partner's loan.
Partner's Loan Account is debited and Cash/Bank Account is credited.
Partner loans are liabilities settled prior to final capital distribution and do not pass through the Realization Account.
4
Analyze cash received from selling an unrecorded asset.
Cash/Bank Account is debited and Realization Account is credited.
All cash realizations from assets (recorded or unrecorded) are credited to the Realization Account.

Anahtar Kavram

Double-entry accounting treatment during partnership dissolution
Soru 12340Soru

When large numbers of young, economically active individuals migrate from rural agricultural villages to major cities, the rural origin communities undergo notable population changes. Which of the following is a direct demographic effect of this youth out-migration on the rural source region?

Cevabı ve açıklamayı göster

Cevap: An increase in the proportion of elderly dependents relative to the remaining working-age population

Cevap

An increase in the proportion of elderly dependents relative to the remaining working-age population
When young adults migrate from rural villages to cities, the working-age population in the rural source region shrinks. Consequently, children and the elderly make up a higher percentage of the remaining population, increasing the relative proportion of elderly dependents.

Adım Adım Çözüm

1
Identify the primary demographic group involved in rural-to-urban migration
Youth and young adults (the economically active workforce) migrate most frequently.
Urban centers offer wage employment and tertiary education, attracting productive age brackets.
2
Determine the demographic composition remaining at the rural origin
Children and elderly individuals constitute a larger relative share of the remaining population.
The departure of young adults leaves dependent age groups behind in the rural villages.
3
Evaluate the net demographic consequence
The proportion of elderly dependents increases relative to the working-age population.
This elevates the overall demographic dependency ratio in the rural sending area.

Anahtar Kavram

Demographic impacts of out-migration on rural source areas
ÖncekiSayfa 617 / 697Sonraki
Tüm alıştırma soruları — JAMB UTME | Examkin