Examkin

Awareness and Observation

15 soru

Tüm türler15Çoktan seçmeli7Çoklu seçim4Sıralama4
Soru 1Soru →

You are parked at the side of the road and preparing to move off into moving traffic. After checking your interior and exterior mirrors and applying the appropriate signal, what must you do immediately before pulling away from the kerb?

Cevabı ve açıklamayı göster

Cevap: Look over your right shoulder to check the blind spot for any unseen road users

Cevap

Check your blind spot by looking over your right shoulder for approaching road users before moving off.
Before moving off from the kerb, performing a final physical check over your shoulder into the blind spot is essential. Mirrors cannot show the entire area around your vehicle, so a shoulder check ensures no cyclists, motorcyclists, or other vehicles have entered your blind spot.

Adım Adım Çözüm

1
Complete the full Mirror-Signal routine
Assessed traffic visible in interior and door mirrors and communicated intentions to other road users.
Mirrors provide awareness of traffic directly behind and alongside, but cannot capture every angle.
2
Perform a physical shoulder check into the blind spot immediately before moving
Ensured that no vulnerable road users (cyclists, motorcyclists, or pedestrians) are hidden alongside the vehicle.
The vehicle's door and window pillars create blind spots that require direct observation before moving into the lane.

Anahtar Kavram

All-round awareness and physical blind spot checks prior to moving off
Tahmini Süre:45s
Soru 2Soru →

You are driving along an urban road with stationary traffic queued in the opposing lane and vehicles parked along your left-hand side. Ahead, an oncoming driver in the queue flashes their headlights near an unmarked side junction. What should you do to maintain safety?

Cevabı ve açıklamayı göster

Cevap: Scan the gap actively, reduce your speed, and anticipate that pedestrians, cyclists, or emerging vehicles may cross through the queue.

Cevap

Scan the gap actively, reduce your speed, and anticipate that pedestrians, cyclists, or emerging vehicles may cross through the queue.
When a driver flashes their headlights near a junction or gap in traffic, they are often attempting to let another road user turn across or cross the carriageway. Because stationary queues create significant blind spots, defensive drivers must scan actively, slow down, and prepare to stop for emerging vehicles, cyclists, or pedestrians who may move into their path.

Adım Adım Çözüm

1
Assess the situation and recognise the risks created by the headlight signal and the traffic gap.
Identify that another road user may attempt to cross through the blind gap in the stationary opposing traffic.
Rule 111 of The Highway Code states that flashing headlights only serve to alert other road users of a vehicle's presence, not to give priority or signal safety.
2
Adjust vehicle speed and adopt an active, wide visual scanning pattern across the gap, side road, and parked vehicles.
Create sufficient time and stopping distance to respond to any hidden hazards.
Early observation and anticipation prevent sudden braking and allow a safe response to emerging vulnerable road users or vehicles.

Anahtar Kavram

Defensive observation, anticipation of hidden hazards, and correct interpretation of headlight signals
Tahmini Süre:1m 0s
Soru 3Soru →

You are parked on the left-hand side of a busy urban road and preparing to move off into the flow of traffic. Arrange the following observation and control steps in the correct chronological order according to standard DVSA awareness and observation procedures.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct chronological sequence begins with checking the interior and right door mirrors, scanning ahead and checking the left kerbside, applying the right indicator, performing a final right-shoulder blind spot check, and finally moving off smoothly.
The correct sequence follows the Prepare-Observe-Move (POM) standard. The driver must conduct full 360-degree observations starting with the rear-view and right mirrors, followed by the left mirror and kerbside. Once confirmed safe, signaling informs other road users. A final right-shoulder blind spot check confirms that no cyclist or vehicle has entered the blind zone before finally releasing the brake and moving off.

Adım Adım Çözüm

1
Check the interior and right door mirrors.
Assesses following traffic and approaching vehicles from the rear.
Establishes baseline awareness of traffic flow on the main carriageway.
2
Scan the road ahead and check the left door mirror and pavement.
Identifies pedestrians, cyclists, and forward hazards.
Completes full 360-degree observation before deciding to signal.
3
Apply the right indicator signal.
Clearly signals your intention to join the traffic stream.
Allows other road users sufficient time to anticipate your manoeuvre.
4
Perform a direct over-the-right-shoulder blind spot check.
Verifies that no hidden vehicles, cyclists, or motorcyclists are in the vehicle's blind zone.
Door mirrors cannot eliminate blind spots adjacent to the rear quarter of the car.
5
Release the parking brake and smoothly drive forward into the lane.
Integrates safely into the active flow of traffic.
Movement should only happen after comprehensive visual verification.

Anahtar Kavram

Comprehensive 360-degree observation and blind spot verification prior to moving off
Tahmini Süre:1m 30s
Soru 4Soru →

You are driving along an urban main road and plan to turn left into a side road. Arrange the following steps in the correct order to ensure complete observation and awareness.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

Check your interior mirror and left door mirror, signal left in good time, check the left mirror and nearside blind spot for cyclists, and scan the junction entrance to yield to crossing pedestrians.
Safe observation follows the established Mirror-Signal-Manoeuvre routine. Drivers must first check interior and nearside mirrors to assess rear traffic, signal their intention in good time, re-check the nearside blind spot to protect filtering cyclists, and finally scan the junction to yield to crossing pedestrians as required by the Highway Code.

Adım Adım Çözüm

1
Check the interior and left exterior mirrors.
You become aware of the speed and distance of following traffic.
The Mirror-Signal-Manoeuvre (MSM) routine requires assessing rearward traffic before indicating.
2
Apply the left indicator in good time.
Surrounding road users are alerted to your upcoming manoeuvre.
Timely signalling prevents confusion and allows following traffic to adjust their speed.
3
Perform a nearside mirror and blind spot check.
You confirm there are no vulnerable road users filtering up your left side.
Cyclists frequently travel along the kerb and may be hidden in the vehicle's nearside blind spot.
4
Observe the mouth of the side road and give priority to crossing pedestrians.
You confirm the junction is clear and complete the manoeuvre safely.
Under the Highway Code hierarchy of road users, drivers must give way to pedestrians crossing or waiting to cross a side road into which they are turning.

Anahtar Kavram

Applying the Mirror-Signal-Manoeuvre routine with thorough blind spot and vulnerable road user checks when turning left.
Tahmini Süre:45s
Soru 5Soru →

You are driving along a busy residential street lined with parked vehicles on both sides. Which TWO hazards should you actively scan for and anticipate?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Pedestrians, especially children, stepping out from between parked vehicles; Vehicle doors opening unexpectedly into the road

Cevap

Scanning for pedestrians stepping out from between parked vehicles and anticipating vehicle doors opening unexpectedly into the road.
When driving past parked cars, effective observation requires scanning for hidden hazards such as pedestrians stepping out between vehicles and doors opening suddenly into your path. Maintaining awareness of these potential dangers allows you to adjust your speed and lateral road position accordingly.

Adım Adım Çözüm

1
Assess the immediate driving environment and identify static obstructions.
Recognise that a street lined with parked vehicles restricts sightlines and reduces available road width.
Parked cars conceal vulnerable road users and create moving hazards along the roadside.
2
Scan broad peripheral zones rather than fixing gaze on a single point.
Identify potential movement under and between parked cars (such as pedestrians' feet) and occupants seated inside vehicles.
Early observation allows adequate time and distance to react smoothly without harsh braking.

Anahtar Kavram

Maintaining proactive observation and hazard anticipation when driving past parked vehicles.
Tahmini Süre:45s
Soru 6Soru →

You are driving on a dual carriageway and intend to change lanes to the right. After checking your mirrors and signalling, which action should you take immediately before moving across?

Cevabı ve açıklamayı göster

Cevap: Check your right-hand blind spot with a quick sideways glance

Cevap

Check your right-hand blind spot with a quick sideways glance
Before steering across to change lanes, a quick sideways glance over the shoulder is essential to check the blind spot. Even properly adjusted mirrors leave areas beside and slightly behind the vehicle hidden, where overtaking traffic or motorcycles may be travelling.

Adım Adım Çözüm

1
Assess the observation routine required before changing lanes on a multi-lane carriageway
Recognise that vehicle mirrors do not provide a complete view of the road beside you
All vehicles have blind spots where other road users can be hidden from mirror view
2
Determine the final visual safety check before commencing the lane change
Perform a quick glance over the right shoulder into the blind spot area
This confirms no vehicle or motorcyclist is positioned alongside before steering into the adjacent lane

Anahtar Kavram

Blind spot checks during lane changes
Tahmini Süre:30s
Soru 7Soru →

You are navigating a busy multi-lane gyratory system during peak traffic hours and intend to change lanes to your left. Which TWO observation practices are essential for maintaining safety and awareness before completing this manoeuvre? (Select TWO answers)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Check both the interior mirror and the left door mirror to assess the speed and position of vehicles behind; Perform a physical shoulder check into the left blind spot to detect vulnerable road users positioned alongside

Cevap

Checking both the interior and left door mirrors to gauge trailing traffic and performing a physical shoulder check into the left blind spot are the two essential observation practices.
Executing a safe lane change on a multi-lane system requires full 360-degree awareness. The driver must first evaluate trailing traffic via the interior and left exterior mirrors to judge speed and distance, and then complete a quick physical shoulder check into the left blind spot to verify no cyclist or motorcyclist is positioned alongside.

Adım Adım Çözüm

1
Check the interior rear-view mirror followed by the left door mirror.
Gains an accurate picture of traffic speed, distance, and approaching vehicles from the rear.
Effective mirror observation ensures that moving into the left lane will not cut across faster-moving traffic.
2
Perform a rapid glance over the left shoulder into the vehicle blind spot.
Confirms that no cyclists, motorcyclists, or small vehicles are hidden in areas unreflected by mirrors.
Mirrors cannot eliminate blind spots, making physical head checks mandatory before altering lateral positioning.

Anahtar Kavram

Observation routine involving structured mirror checks and physical blind spot checks during lane changes in multi-lane traffic systems.
Tahmini Süre:1m 30s
Soru 8Soru →

You are driving along a rural lane and approaching an unmarked crossroads where high hedges severely restrict your view of the intersecting road. What observation technique and action should you take to safely navigate this junction?

Cevabı ve açıklamayı göster

Cevap: Slow down and gently creep forward until you can see clearly in both directions before committing to proceed

Cevap

Slow down and gently creep forward until you can see clearly in both directions before committing to proceed
When approaching an unmarked crossroads or blind junction where hedges, walls, or buildings severely limit forward and side vision, you must reduce speed and edge forward slowly (the 'peep and creep' method). This gradual movement widens your visual angle past the obstruction, enabling you to observe cross-traffic in both directions and stop immediately if another road user is approaching.

Adım Adım Çözüm

1
Assess the physical obstruction upon approach and reduce speed to a crawl well before reaching the junction line.
The vehicle is brought under full control at low speed, giving maximum time to scan and stop if necessary.
Unmarked crossroads have no priority rules, and visual obstructions like hedges completely hide cross-traffic.
2
Apply the 'peep and creep' routine by edging forward gradually while continuously scanning both left and right.
Your sightline expands past the hedge line, allowing you to clearly see intersecting traffic before committing.
Physical obstructions create blind spots that can only be safely cleared through progressive, controlled forward observation.

Anahtar Kavram

Observation and hazard anticipation at blind junctions and unmarked crossroads using the 'peep and creep' technique.
Tahmini Süre:45s
Soru 9Soru →

You intend to turn right from a two-way main road into a side street. Arrange the following steps in the correct order to carry out the observation and driving routine safely.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with checking the interior and right door mirrors, followed by signalling right, positioning just to the left of the centre line with straight wheels, scanning oncoming traffic and junction hazards, and finally completing the turn across the opposing lane.
The correct sequence follows the standard UK Mirror–Signal–Manoeuvre (MSM) routine. Mirror checks must always precede signalling to evaluate traffic behind. Once signalled, positioning correctly near the centre line clarifies intentions. Prior to executing the turn, thorough observation of oncoming traffic and the target road entrance is required to give way appropriately to oncoming traffic and crossing pedestrians.

Adım Adım Çözüm

1
Check interior and right-side door mirrors.
Awareness of the presence, distance, and speed of vehicles behind you.
You must establish whether it is safe to slow down and signal without alarming or conflicting with following traffic or overtaking road users.
2
Apply the right-turn direction indicator in good time.
Clear communication to surrounding road users.
Gives oncoming drivers, following vehicles, and pedestrians adequate notice of your planned change in direction.
3
Adopt a road position just to the left of the centre line with the wheels pointing forward.
Optimal road placement and space management.
Allows traffic behind to pass on the left where space permits and ensures safety against rear-end shunts.
4
Scan oncoming traffic, cycle lanes, and the target side road entrance.
Accurate situational awareness of all potential moving and static hazards.
Identifies closing gaps in oncoming traffic, filtering two-wheeled vehicles, and pedestrians who have priority when crossing the junction.
5
Steer across the oncoming carriageway into the side road.
Safe completion of the right-turn manoeuvre.
Turning only takes place once an acceptable safety margin has been verified in all relevant observation zones.

Anahtar Kavram

Mirror–Signal–Manoeuvre (MSM) and Position–Speed–Look (PSL) routine for right-hand turns
Tahmini Süre:1m 0s
Soru 10Soru →

While approaching a stationary bus at a designated bus stop in a busy commercial area, which TWO observation actions should you take to anticipate hidden hazards before passing? (Select TWO answers)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Scan underneath and around the front of the bus for the feet or shadows of crossing pedestrians; Check your mirrors and right-side blind spot before moving out to overtake

Cevap

Scan underneath and around the front of the bus for crossing pedestrians, and check mirrors and right-side blind spot before moving out.
When passing a stationary bus, effective observation involves actively scanning for pedestrians who may emerge from in front of the vehicle (such as looking for feet or shadows underneath) and conducting full mirror and blind-spot checks before moving out into the opposing lane to ensure no trailing road user is already overtaking.

Adım Adım Çözüm

1
Scan the perimeter and underneath the stationary vehicle
Early identification of vulnerable pedestrians stepping out into the carriageway
Large vehicles create substantial blind spots where pedestrians often cross without clear sightlines
2
Perform mirror checks and a right shoulder blind-spot check before moving out
Safe positioning without conflict with overtaking traffic or cyclists
Moving past an obstruction requires changing road position across the centre line, necessitating all-round observation

Anahtar Kavram

All-round observation routines and hazard anticipation around stationary visual obstructions
Tahmini Süre:1m 0s
Soru 11Soru →

You are waiting to emerge from a side road onto a busy two-way street. A vehicle approaching from your right is signalling left to turn into your road. What action should you take to confirm it is safe to emerge?

Cevabı ve açıklamayı göster

Cevap: Wait until the vehicle has slowed down and actually started to turn before pulling out

Cevap

Wait until the vehicle has slowed down and actually started to turn before pulling out
A flashing indicator does not guarantee that a vehicle will turn; the driver may have left the signal on accidentally or intend to turn into an entrance further down the road. Waiting until the vehicle clearly slows down and begins turning confirms their intention and gives you sufficient time to scan for pedestrians crossing or cyclists filtering past.

Adım Adım Çözüm

1
Assess the approaching vehicle's physical movement rather than relying solely on its indicator.
Confirmation of whether the driver is actively slowing down and committing to the turn.
Indicators can be left on by mistake or activated in advance for an entrance located beyond the junction.
2
Scan the wider junction area for other road users, particularly cyclists and pedestrians who may be masked by the turning vehicle.
Comprehensive situational awareness of all potential road hazards before entering the carriageway.
A turning vehicle creates a visual obstruction that can hide smaller, vulnerable road users.

Anahtar Kavram

Observation and verification of vehicle intentions at junctions
Tahmini Süre:1m 0s
Soru 12Soru →

When travelling past parked cars along a street, you notice exhaust fumes rising from a stationary vehicle ahead with its front wheels angled towards the carriageway. What should you anticipate and how should you respond?

Cevabı ve açıklamayı göster

Cevap: Anticipate that the vehicle may pull out into your path; reduce your speed and be prepared to stop

Cevap

Anticipate that the vehicle may pull out into your path; reduce your speed and be prepared to stop.
Visible exhaust fumes and front wheels angled towards the carriageway are clear indicators that the vehicle is occupied, running, and preparing to move off. A defensive driver anticipates that the vehicle might pull out suddenly, slows down smoothly, and prepares to stop if necessary.

Adım Adım Çözüm

1
Scan ahead and identify early visual clues on parked vehicles along the roadside.
Identify that exhaust fumes and steered front wheels signal an intention to move off.
Effective forward scanning allows early hazard recognition before a vehicle enters your path.
2
Adjust your driving approach by slowing down and covering the footbrake.
Maintain a safe stopping margin and preparedness to give way if the vehicle pulls out.
Anticipating other road users' actions prevents the need for sudden, emergency braking.

Anahtar Kavram

Early hazard detection and anticipation of moving-off vehicles among parked traffic
Tahmini Süre:45s
Soru 13Soru →

You are driving along a busy commercial street with parked vehicles on both sides. A delivery van has stopped ahead at the kerbside with its hazard warning lights flashing while the driver unloads goods from the rear. Which TWO observation checks should you carry out before pulling out to pass the van?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Check your mirrors and look over your right shoulder into the blind spot to ensure no cyclists or other road users are overtaking you; Scan beneath and between the parked vehicles ahead for shadows, feet, or movement indicating hidden pedestrians about to cross

Cevap

Before pulling out to pass a stationary delivery vehicle, you should check your mirrors and right-side blind spot for overtaking cyclists or vehicles, and scan beneath and between parked vehicles for pedestrians who may emerge into the carriageway.
Passing a stationary vehicle requires proactive, all-round observation. Checking mirrors and completing a right shoulder blind-spot check ensures no approaching or filtering road users (like cyclists) are in your path, while scanning beneath and between parked vehicles helps identify crossing pedestrians before they emerge into the road.

Adım Adım Çözüm

1
Scan ahead around the stationary vehicle and between parked cars
Identifies hidden pedestrian hazards or pedestrians stepping out from behind the delivery van
Early visual scanning beneath and between stationary vehicles provides advance warning of vulnerable road users.
2
Perform full mirror checks followed by a right shoulder blind-spot check
Confirms the overtaking path is clear of approaching or filtering traffic
Mirrors alone do not show the full area adjacent to your vehicle; shoulder checks eliminate the blind spot before changing road position.

Anahtar Kavram

All-round situational observation and blind-spot checks prior to passing stationary road hazards
Tahmini Süre:1m 0s
Soru 14Soru →

You are driving in town and preparing to turn left into a side road. Why is it essential to check your left-side door mirror and near-side blind spot before making the turn?

Cevabı ve açıklamayı göster

Cevap: To check for cyclists or motorcyclists filtering or riding up on your left-hand side

Cevap

To check for cyclists or motorcyclists filtering or riding up on your left-hand side.
Before turning left, drivers must always check the interior mirror, the left exterior mirror, and the near-side blind spot. Cyclists, e-scooter riders, and motorcyclists often filter along the inside of slow-moving traffic. Checking ensures you do not turn across their path and cause a collision.

Adım Adım Çözüm

1
Assess the situation before executing the left turn.
Identify that cyclists and motorcyclists may be travelling faster than slow-moving traffic along the left kerbside or inside lane.
Vulnerable road users are less visible and frequently filter through queued or decelerating vehicles.
2
Perform the Mirror-Signal-Manoeuvre (MSM) routine, including exterior mirror and blind spot checks.
Ensure the near-side space is completely clear before crossing the cycle track or turning into the side street.
Blind spots are areas obscured by vehicle pillars and not fully covered by mirrors alone.

Anahtar Kavram

Effective observation and blind spot awareness to protect vulnerable road users when changing direction.
Tahmini Süre:45s
Soru 15Soru →

You are following a slow-moving tractor on a rural single-carriageway road and are considering whether to overtake. Arrange the following observation and procedural steps in the correct chronological order.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence is: Increase your following distance to broaden your view of the road ahead, check interior and right-side door mirrors, perform a right shoulder blind-spot check, and then signal right and move out smoothly once the road ahead is confirmed clear.
The correct routine requires dropping back first to gain a clear view ahead, followed by checking rear and offside mirrors, checking the offside blind spot, and lastly signalling and moving out when safe. This ensures comprehensive situational awareness before committing to the manoeuvre.

Adım Adım Çözüm

1
Increase following distance
Broadened forward field of vision past the large vehicle
Staying too close to a large or slow-moving vehicle restricts forward visibility and hides potential hazards such as junctions, bends, or oncoming road users.
2
Check interior and right door mirrors
Awareness of the speed and position of following traffic
You must ensure that no vehicle behind has started to overtake or is following too closely before preparing to move out.
3
Check the right-hand shoulder blind spot
Confirmation that no road user is in the offside blind area
Mirrors leave an unmonitored blind spot alongside your vehicle where smaller road users such as motorcyclists may already be positioned.
4
Signal right and execute the manoeuvre when clear
Safe execution of the overtake without surprising other road users
Signalling must only occur after observations confirm the road ahead and behind are safe, avoiding misleading other drivers.

Anahtar Kavram

Applying structured observation routines and maintaining adequate vision before overtaking large or slow-moving vehicles
Tahmini Süre:1m 0s