Tüm alıştırma soruları

5556 soru

Soru 5321Soru

Experiment 1

Students investigated the rate of enzymatic hydrolysis of oo-nitrophenyl-β\beta-D-galactopyranoside (ONPGONPG) catalyzed by the enzyme lactase. The reaction yields oo-nitrophenol, a product that absorbs light strongly at a wavelength of 420 nm420\text{ nm}. To accurately measure the rate of product formation using a spectrophotometer without error from background absorbance or premature reaction, which of the following represents the correct chronological sequence of procedural steps the students must perform?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct procedural order is: (1) Calibrate the spectrophotometer with a blank cuvette containing buffer solution, (2) Combine substrate and buffer in the reaction cuvette and temperature-equilibrate, (3) Add lactase enzyme solution, mix quickly, and start the timer, (4) Insert the reaction cuvette into the spectrophotometer sample holder and close the lid, (5) Record absorbance values every 30 seconds for 3 minutes.
The proper scientific workflow begins with instrument baseline calibration using a blank cuvette containing only buffer to zero out background absorbance. Next, the reaction vessel is prepared by combining buffer and substrate (ONPGONPG) to reach the desired temperature. Adding the enzyme initiates the catalytic reaction, which requires immediate mixing and starting the timer (t=0 st = 0\text{ s}). The cuvette is then swiftly transferred into the instrument's light-tight chamber to prevent ambient light distortion, after which kinetic absorbance readings are systematically logged every 30 seconds.

Adım Adım Çözüm

1
Identify baseline calibration requirements.
Spectrophotometer zeroing must precede any measurement.
Calibrating with a blank removes baseline optical absorption by solvent and cuvette walls.
2
Determine reaction mixture preparation steps prior to initiation.
Substrate and buffer are combined and thermal equilibrium established.
Enzyme activity is temperature-dependent, so temperature must be stabilized before reaction initiation.
3
Pinpoint the exact initiation point of the reaction.
Enzyme introduction defines t=0 st = 0\text{ s}.
The reaction begins immediately upon enzyme addition, necessitating rapid mixing and timer start.
4
Determine the physical placement of apparatus components.
Cuvette is transferred into the sample compartment and closed.
Closing the lid prevents ambient room light from interfering with detector readings during measurement.
5
Establish data collection timeline.
Absorbance readings are documented periodically at 30-second30\text{-second} intervals.
Periodic sampling allows calculation of the initial reaction velocity.

Anahtar Kavram

Sequencing Spectrophotometric and Enzymatic Assay Procedures
Tahmini Süre:1m 30s
Soru 5322Soru

In the standard (x,y)(x, y) coordinate plane, the equation of a circle is given by 3x2+3y212x+24y15=03x^2 + 3y^2 - 12x + 24y - 15 = 0. What is the radius of this circle?

Cevabı ve açıklamayı göster

Cevap: 5

Cevap

The radius of the circle is 5 units.
Dividing the equation 3x2+3y212x+24y15=03x^2 + 3y^2 - 12x + 24y - 15 = 0 by 3 gives x2+y24x+8y5=0x^2 + y^2 - 4x + 8y - 5 = 0. Completing the square for both variables results in (x2)2+(y+4)2=25(x - 2)^2 + (y + 4)^2 = 25. Because r2=25r^2 = 25, taking the square root gives the radius r=5r = 5.

Adım Adım Çözüm

1
Divide the entire equation by 3.
x2+y24x+8y5=0x^2 + y^2 - 4x + 8y - 5 = 0
The standard form of a circle equation (xh)2+(yk)2=r2(x-h)^2 + (y-k)^2 = r^2 requires the coefficients of x2x^2 and y2y^2 to be 1.
2
Group terms and move the constant to the right side of the equation.
(x24x)+(y2+8y)=5(x^2 - 4x) + (y^2 + 8y) = 5
Isolating quadratic terms makes completing the square straightforward.
3
Complete the square for both variables by adding (42)2=4(\frac{-4}{2})^2 = 4 and (82)2=16(\frac{8}{2})^2 = 16 to both sides.
(x24x+4)+(y2+8y+16)=5+4+16(x^2 - 4x + 4) + (y^2 + 8y + 16) = 5 + 4 + 16
Adding these values turns the expressions into perfect square trinomials while preserving equality.
4
Express in standard form and solve for the radius rr.
(x2)2+(y+4)2=25    r2=25    r=5(x - 2)^2 + (y + 4)^2 = 25 \implies r^2 = 25 \implies r = 5
The radius is the principal square root of r2r^2.

Anahtar Kavram

Converting general form of a circle equation to standard form using completing the square.
Soru 5323Soru

A water desalination plant processes seawater using two filtration units, Unit P and Unit Q. Unit P can process 720720 gallons of water in 4545 minutes. Unit Q processes water at a rate that is 25%25\% faster than Unit P. If both units operate continuously at their respective rates, how many total gallons of water can Unit P and Unit Q process combined in 2.52.5 hours?

Cevabı ve açıklamayı göster

Cevap: 5,4005,400

Cevap

5,4005,400 gallons
Unit P processes water at a rate of 1616 gallons per minute (720÷45720 \div 45). Unit Q operates 25%25\% faster, making its rate 2020 gallons per minute (16×1.2516 \times 1.25). Working simultaneously, their combined rate is 3636 gallons per minute (16+2016 + 20). Converting 2.52.5 hours into 150150 minutes (2.5×602.5 \times 60) and multiplying by the combined rate gives a total of 36×150=5,40036 \times 150 = 5,400 gallons.

Adım Adım Çözüm

1
Calculate the unit processing rate of Unit P per minute.
720 gallons45 minutes=16 gallons per minute\frac{720 \text{ gallons}}{45 \text{ minutes}} = 16 \text{ gallons per minute}
Divide the total gallons processed by Unit P by the number of minutes to find its unit rate.
2
Determine the unit processing rate of Unit Q per minute.
16×(1+0.25)=20 gallons per minute16 \times (1 + 0.25) = 20 \text{ gallons per minute}
Unit Q is 25% faster than Unit P, so multiply Unit P's rate by 1.25.
3
Calculate the combined processing rate of both units.
16+20=36 gallons per minute16 + 20 = 36 \text{ gallons per minute}
Add the individual rates of Unit P and Unit Q to get their joint processing speed.
4
Convert 2.5 hours to minutes and calculate the combined total gallons processed.
2.5 hours×60 minutes/hour=150 minutes2.5 \text{ hours} \times 60 \text{ minutes/hour} = 150 \text{ minutes}; 36×150=5,400 gallons36 \times 150 = 5,400 \text{ gallons}
Multiply the combined rate per minute by the total operating time in minutes.

Anahtar Kavram

Unit rate calculation and proportional scaling across multiple rate sources
Soru 5324Soru

During their research expedition in the Atacama Desert, radio astronomers calibrated the sensitive, optical telescope, collected high-resolution data and mapped the spatial distribution of distant star clusters. Which choice for the underlined portion best conforms to the conventions of standard written English?

Cevabı ve açıklamayı göster

Cevap: sensitive optical telescope, collected high-resolution data,

Cevap

The choice stating 'sensitive optical telescope, collected high-resolution data,' is correct because it avoids placing a comma between cumulative adjectives ('sensitive optical') and uses commas appropriately to separate the three parallel verb phrases in the series.
The correct answer removes the inappropriate comma between cumulative adjectives ('sensitive optical') while correctly using commas to separate all three actions in the series: 'calibrated the sensitive optical telescope, collected high-resolution data, and mapped...'.

Adım Adım Çözüm

1
Determine whether 'sensitive' and 'optical' are coordinate or cumulative adjectives.
They are cumulative adjectives because 'optical telescope' forms a single unified noun phrase modified by 'sensitive' (testing by inserting 'and' gives 'sensitive and optical telescope', which sounds unnatural). Therefore, no comma should separate 'sensitive' and 'optical'.
Commas are only placed between coordinate adjectives, not cumulative adjectives.
2
Identify the list structure in the sentence.
The sentence features three parallel past-tense verb phrases: (1) 'calibrated...', (2) 'collected...', and (3) 'mapped...'.
Items in a series of three or more elements must be separated by commas.
3
Select the option that correctly implements both rules.
The correct option removes the comma between 'sensitive' and 'optical' and places a comma after 'telescope' and 'data,' to separate the list items properly.
This maintains parallel list structure and adheres to standard punctuation conventions for cumulative adjectives.

Anahtar Kavram

Distinguishing cumulative adjectives from coordinate adjectives and punctuating items in a series correctly.
Soru 5325Soru

If x=2x = -2, y=12y = \frac{1}{2}, and z=3z = -3, what is the value of the algebraic expression x3y24z(x+2y)2z\frac{x^3 y^{-2} - 4z}{(x + 2y)^2 - z}?

Cevabı ve açıklamayı göster

Cevap: 5-5

Cevap

The value of the expression is 5-5.
Substituting x=2x = -2, y=12y = \frac{1}{2}, and z=3z = -3 yields a numerator of (2)3(12)24(3)=(8)(4)+12=20(-2)^3 \left(\frac{1}{2}\right)^{-2} - 4(-3) = (-8)(4) + 12 = -20, and a denominator of (2+2(12))2(3)=(1)2+3=4\left(-2 + 2\left(\frac{1}{2}\right)\right)^2 - (-3) = (-1)^2 + 3 = 4. Dividing 20-20 by 44 gives the final answer 5-5.

Adım Adım Çözüm

1
Evaluate the terms in the numerator: x3y24zx^3 y^{-2} - 4z
Since x=2x = -2, x3=(2)3=8x^3 = (-2)^3 = -8. Since y=12y = \frac{1}{2}, y2=(12)2=22=4y^{-2} = \left(\frac{1}{2}\right)^{-2} = 2^2 = 4. So x3y2=(8)(4)=32x^3 y^{-2} = (-8)(4) = -32. Also, 4z=4(3)=12-4z = -4(-3) = 12. The numerator simplifies to 32+12=20-32 + 12 = -20.
Negative exponents indicate reciprocals, and cubing a negative base yields a negative result.
2
Evaluate the terms in the denominator: (x+2y)2z(x + 2y)^2 - z
Inside the parentheses, x+2y=2+2(12)=2+1=1x + 2y = -2 + 2\left(\frac{1}{2}\right) = -2 + 1 = -1. Squaring this gives (1)2=1(-1)^2 = 1. Subtracting zz gives 1(3)=1+3=41 - (-3) = 1 + 3 = 4.
Operations inside parentheses must be calculated before applying the exponent, and subtracting a negative integer is equivalent to adding its positive.
3
Divide the numerator by the denominator
204=5.\frac{-20}{4} = -5.
Dividing a negative integer by a positive integer produces a negative quotient.

Anahtar Kavram

Evaluating algebraic expressions involving negative exponents, integer substitutions, and order of operations.
Tahmini Süre:1m 30s
Soru 5326Soru

A commercial bakery uses an automated dough divider that cuts a large batch of dough of mass mm kilograms into 4848 identical portioned rolls. If each portioned roll has a mass of 0.1250.125 kilograms, what was the total mass mm, in kilograms, of the original batch of dough?

Cevabı ve açıklamayı göster

Cevap: 6.006.00

Cevap

The total mass of the original batch of dough is 6.006.00 kilograms.
The scenario describes dividing a total mass mm into 4848 equal parts, where each part equals 0.1250.125 kg. Setting up the one-step division equation m48=0.125\frac{m}{48} = 0.125 and multiplying both sides by 4848 gives m=6.00m = 6.00 kilograms.

Adım Adım Çözüm

1
Define the algebraic relationship based on the problem description.
m48=0.125\frac{m}{48} = 0.125
Dividing the total mass mm into 4848 equal pieces yields the mass of one individual roll.
2
Isolate the variable mm by performing the inverse operation.
m=48×0.125m = 48 \times 0.125
Multiply both sides of the equation by 4848 to cancel out the denominator.
3
Calculate the numerical product.
m=6.00m = 6.00
48×0.125=6.0048 \times 0.125 = 6.00 kilograms.

Anahtar Kavram

Basic Algebraic Expressions and One-Step Equations
Soru 5327Soru

A biochemist conducted an experiment to investigate how substrate availability influences cellular respiration rates in yeast. Five identical incubation flasks were prepared, each containing 50 mL50\text{ mL} of yeast suspension in a buffer solution maintained at a constant temperature of 30C30^\circ\text{C} and a pH\text{pH} of 6.56.5. Different masses of glucose—0.5 g0.5\text{ g}, 1.0 g1.0\text{ g}, 1.5 g1.5\text{ g}, 2.0 g2.0\text{ g}, and 2.5 g2.5\text{ g}—were added to Flasks 1 through 5, respectively. The volume of carbon dioxide (CO2\text{CO}_2) gas generated by each flask was measured after 10 minutes10\text{ minutes}.

Which of the following operational parameters represents the independent variable in this experiment?

Cevabı ve açıklamayı göster

Cevap: The mass of glucose added to each incubation flask

Cevap

The independent variable in this experiment is the mass of glucose added to each incubation flask.
The mass of glucose added to each flask is the independent variable because it is the specific factor intentionally changed by the experimenter across the experimental treatments to assess its effect.

Adım Adım Çözüm

1
Identify the experimental factor being intentionally manipulated by the researcher across trial groups.
The researcher varied the mass of glucose (0.5 g0.5\text{ g} to 2.5 g2.5\text{ g}) across Flasks 1 through 5.
The factor directly changed by the experimenter to observe an outcome is the independent variable.
2
Distinguish the independent variable from dependent and controlled variables.
Glucose mass is the independent variable; CO2\text{CO}_2 gas volume produced is the dependent variable; temperature, pH\text{pH}, suspension volume, and reaction time are controlled variables.
Clear differentiation ensures proper identification of cause and effect in experimental design.

Anahtar Kavram

Identifying Independent, Dependent, and Controlled Variables
Soru 5328Soru

A marine biologist conducted an experiment to investigate how varying water salinity affects the oxygen consumption rate of shore crabs (*Carcinus maenas*). Five identical tanks were prepared with water salinities of 10 ppt10\text{ ppt}, 15 ppt15\text{ ppt}, 20 ppt20\text{ ppt}, 25 ppt25\text{ ppt}, and 30 ppt30\text{ ppt}. All tanks were held at a constant water temperature of 18C18^\circ\text{C}, and crabs of equal body mass were used in each trial.

Match each experimental component on the left with its corresponding variable classification on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Water salinity level (10 ppt10\text{ ppt} to 30 ppt30\text{ ppt})
Oxygen consumption rate of the crabs
Water temperature (18C18^\circ\text{C}) and crab body mass

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Water salinity level matches Independent Variable; Oxygen consumption rate matches Dependent Variable; Water temperature and crab body mass match Controlled Variables.
Water salinity level is systematically adjusted by the researcher across trial groups, making it the independent variable. The oxygen consumption rate is measured to quantify the crabs' metabolic response, making it the dependent variable. Parameters kept constant across all tanks—such as water temperature (18C18^\circ\text{C}) and crab body mass—ensure fair testing and serve as controlled variables.

Adım Adım Çözüm

1
Identify the factor intentionally manipulated across treatment groups.
The researcher deliberately set five different water salinities (10 ppt10\text{ ppt} to 30 ppt30\text{ ppt}), establishing salinity as the independent variable.
The independent variable is the condition changed or controlled by the scientist to test its effects.
2
Identify the parameter measured as an outcome of the experiment.
The oxygen consumption rate of the crabs was recorded to evaluate physiological response, establishing it as the dependent variable.
The dependent variable represents the response measured to observe the effect of changing the independent variable.
3
Identify environmental and biological factors held uniform across all trials.
Water temperature (18C18^\circ\text{C}) and crab body mass were kept strictly constant, classifying them as controlled variables.
Controlled variables must be standardized so confounding variables do not skew the relationship between the independent and dependent variables.

Anahtar Kavram

Experimental variables are categorized into independent variables (manipulated inputs), dependent variables (measured outcomes), and controlled variables (standardized parameters).
Tahmini Süre:1m 0s
Soru 5329Soru

Read the passage below:

Before botanist Dr. Evelyn Reed published her breakthrough classification of Alpine mosses in 1988, her field research followed a detailed timeline over several years. In the summer of 1982, Reed secured initial grant funding from the Alpine Research Council, which allowed her to assemble her expedition team the following spring. After conducting preliminary soil sampling across the Bernese Alps throughout 1984, Reed spent the winter of 1985 cataloging collected specimens in her Geneva laboratory. Only after completing the laboratory analysis in mid-1986 did she commence writing the formal manuscript that was eventually submitted to the Botanical Society in late 1987.

Based on the passage, arrange the following events from Dr. Reed's research project in chronological order from earliest to latest.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct chronological sequence from earliest to latest is: Assembling the expedition team (Spring 1983), Conducting preliminary soil sampling in the Bernese Alps (1984), Cataloging collected specimens in the Geneva laboratory (Winter 1985), and Commencing the writing of the formal manuscript (Mid-1986).
The text directly outlines the sequence of Dr. Reed's research actions in chronological order: she assembled her team in Spring 1983 (following her 1982 grant award), conducted preliminary soil sampling throughout 1984, cataloged specimens during the winter of 1985, and commenced writing her manuscript in mid-1986.

Adım Adım Çözüm

1
Identify temporal indicators in the passage for each listed event.
The passage provides specific year and seasonal markers: grant funding in Summer 1982 leads to team assembly in Spring 1983; soil sampling occurs throughout 1984; specimen cataloging takes place in Winter 1985; manuscript writing starts in mid-1986.
Tracking explicitly stated temporal markers allows accurate chronological reconstruction of events.
2
Map each event to its specific timeline position.
1. Assembling team (Spring 1983); 2. Soil sampling (1984); 3. Cataloging specimens (Winter 1985); 4. Commencing manuscript (Mid-1986).
Arranging the events in temporal sequence establishes the correct order.

Anahtar Kavram

Determining Stated Sequence of Events
Tahmini Süre:1m 30s
Soru 5330Soru

To restore degraded coastal wetlands, environmental scientists planted native salt marsh grasses, installed wooden sediment fences, and monitored water salinity levels over a three-year period.

Which choice for the underlined portion best conforms to the conventions of standard written English?

Cevabı ve açıklamayı göster

Cevap: grasses, installed wooden sediment fences, and monitored

Cevap

The choice 'grasses, installed wooden sediment fences, and monitored' is correct because it maintains parallel past-tense verb structure and uses standard serial commas.
The phrase 'grasses, installed wooden sediment fences, and monitored' correctly uses commas to separate three parallel past-tense verbs ('planted', 'installed', and 'monitored') that share the common subject 'environmental scientists'.

Adım Adım Çözüm

1
Identify the grammatical structure of the sentence.
The sentence contains a single subject ('environmental scientists') performing a series of three actions.
Recognizing that the sentence contains a list of coordinate verb phrases helps determine proper punctuation and verb form.
2
Check for parallel structure among list items.
The first action is 'planted' (past tense). To maintain parallelism, subsequent actions must also be past-tense verbs ('installed', 'monitored').
Items in a list must share the same grammatical form.
3
Determine the appropriate punctuation for separating list items.
Standard commas (including the serial comma before 'and') should separate the three items in the series.
Semicolons are not needed because the list items do not contain internal commas.

Anahtar Kavram

Commas with parallel items in a series
Tahmini Süre:1m 0s
Soru 5331Soru

Read the passage below:

When horologist Mateo Silva patented his revolutionary dual-balance escapement mechanism in 1928, scholars assumed it was the culmination of his Madrid period. However, Silva had actually sketched the preliminary designs for the escapement four years prior, while convalescing from fever in Toledo. Before establishing his Madrid laboratory in 1924, he completed a rigorous three-year apprenticeship under master clockmaker Alonzo Perez, during which he restored the municipal tower clock. Immediately following his move to Madrid, Silva initiated a series of systematic friction experiments on brass gears. These experiments formed the core of a treatise he published in 1926, two years before obtaining his patent and five years prior to securing commercial manufacturing backing in 1931.

According to the passage, which of the following events occurred FIRST chronologically?

Cevabı ve açıklamayı göster

Cevap: Completing an apprenticeship under master clockmaker Alonzo Perez

Cevap

Completing an apprenticeship under master clockmaker Alonzo Perez occurred first chronologically.
The passage explicitly states that Silva completed his three-year apprenticeship under master clockmaker Alonzo Perez 'before establishing his Madrid laboratory in 1924.' Since all other choices occurred in 1924 or later (sketching preliminary designs in 1924, starting friction experiments in 1924 after moving, and publishing the treatise in 1926), completing the apprenticeship is the earliest event.

Adım Adım Çözüm

1
Identify the time markers and stated dates for each event mentioned in the passage.
The passage provides relative and explicit timestamps for all key events in Mateo Silva's career.
Tracking chronological clues in a non-linear narrative requires anchored temporal reference points.
2
Map out the timeline chronologically based on explicit text details.
Apprenticeship under Alonzo Perez (completed prior to 1924) -> Madrid lab established & preliminary escapement sketches (1924) -> Friction experiments initiated (1924) -> Treatise published (1926) -> Escapement patented (1928) -> Commercial backing secured (1931).
Establishing the precise order reveals which milestone preceded all others.
3
Compare the option choices against the constructed timeline.
Completing the apprenticeship occurred prior to establishing the laboratory in 1924, making it the earliest event among the choices.
Determining the earliest event satisfies the question prompt.

Anahtar Kavram

Determining Stated Sequence of Events from non-linear narrative text
Soru 5332Soru

A weather researcher recorded the daily high temperatures, in degrees Fahrenheit, for 55 consecutive days in a mountain town: 68F68^\circ\text{F}, 74F74^\circ\text{F}, 71F71^\circ\text{F}, 65F65^\circ\text{F}, and 72F72^\circ\text{F}. If the daily high temperature on the 6th day is xFx^\circ\text{F}, and the mean high temperature for all 66 days is 72F72^\circ\text{F}, what is the value of xx?

Cevabı ve açıklamayı göster

Cevap: 8282

Cevap

8282
To achieve a target mean of 72F72^\circ\text{F} over 66 days, the total sum of all 66 daily high temperatures must be 6×72=432F6 \times 72 = 432^\circ\text{F}. Adding the 55 recorded temperatures gives 68+74+71+65+72=350F68 + 74 + 71 + 65 + 72 = 350^\circ\text{F}. Subtracting 350350 from 432432 yields 82F82^\circ\text{F}, which is the temperature needed on the 6th day.

Adım Adım Çözüm

1
Calculate the total sum of the temperatures for the first 55 days.
68+74+71+65+72=35068 + 74 + 71 + 65 + 72 = 350
To find the missing value, we first need the combined total of the known data points.
2
Determine the required total sum for all 66 days using the target mean.
Total Sum=6×72=432\text{Total Sum} = 6 \times 72 = 432
The mean of 66 values is equal to the sum of all 66 values divided by 66.
3
Subtract the 55-day sum from the total 66-day sum to solve for xx.
x=432350=82x = 432 - 350 = 82
The difference between the required total sum and the existing sum gives the value of the 6th data point.

Anahtar Kavram

Finding a missing data value using a target arithmetic mean
Tahmini Süre:1m 0s
Soru 5333Soru

A middle school librarian recorded the number of books checked out by 1515 students during a reading program, as summarized in the table below:

Number of BooksNumber of Students
1133
2244
3355
4422
5511

What is the positive difference between the median and the mean of the number of books checked out per student?

Cevabı ve açıklamayı göster

Cevap: 0.40.4

Cevap

The positive difference between the median and the mean is 0.40.4.
To find the mean, multiply each number of books by the corresponding number of students to find the total sum of books: (1)(3)+(2)(4)+(3)(5)+(4)(2)+(5)(1)=39(1)(3) + (2)(4) + (3)(5) + (4)(2) + (5)(1) = 39. Dividing 3939 by the total of 1515 students yields a mean of 2.62.6. To find the median of 1515 ordered values, locate the 8th value. The cumulative frequencies show that the 1st through 3rd values are 11, the 4th through 7th values are 22, and the 8th through 12th values are 33. Thus, the median is 33. The positive difference between the median and mean is 32.6=0.43 - 2.6 = 0.4.

Adım Adım Çözüm

1
Calculate the total number of books checked out by all students.
Total books = (1×3)+(2×4)+(3×5)+(4×2)+(5×1)=3+8+15+8+5=39(1 \times 3) + (2 \times 4) + (3 \times 5) + (4 \times 2) + (5 \times 1) = 3 + 8 + 15 + 8 + 5 = 39.
Each book quantity must be multiplied by its corresponding student frequency.
2
Calculate the mean number of books per student.
Mean = 3915=2.6\frac{39}{15} = 2.6.
Divide the total number of books by the total number of students.
3
Determine the median number of books.
The total frequency is 1515, so the median is the 15+12=8th\frac{15 + 1}{2} = 8\text{th} value. Cumulative frequencies are 33 (for 1 book), 77 (for 2 books), and 1212 (for 3 books). The 8th value falls in the 3-book category, so Median = 33.
The median represents the middle data point when all 15 student values are listed in non-decreasing order.
4
Calculate the positive difference between the median and the mean.
Difference = 32.6=0.43 - 2.6 = 0.4.
Subtract the mean from the median to find the difference.

Anahtar Kavram

Calculating weighted mean and median from a frequency table.
Tahmini Süre:1m 30s
Soru 5334Soru

A high school athletic department set a total fundraising goal of $2,400\$2,400 for new equipment. During the first week, the department raised 38\frac{3}{8} of the total goal. During the second week, they raised 35%35\% of the total goal. During the third week, they raised 0.150.15 of the total goal. How much money must the department raise in the fourth week to meet its total goal exactly?

Cevabı ve açıklamayı göster

Cevap: $300\$300

Cevap

The athletic department must raise $300\$\text{300} in the fourth week to meet its total goal.
Converting each portion into a dollar value relative to the total goal of $2,400\$\text{2,400} gives $900\$\text{900} for the first week, $840\$\text{840} for the second week, and $360\$\text{360} for the third week. Adding these amounts yields $2,100\$\text{2,100} raised in total. Subtracting $2,100\$\text{2,100} from $2,400\$\text{2,400} gives the remaining requirement of $300\$\text{300}.

Adım Adım Çözüm

1
Calculate the amount raised in Week 1 using the fraction 38\frac{3}{8}.
38×$2,400=$900\frac{3}{8} \times \$2,400 = \$900
To find a fractional part of a total amount, multiply the total by the fraction.
2
Calculate the amount raised in Week 2 using the percentage 35%35\%.
0.35×$2,400=$8400.35 \times \$2,400 = \$840
Convert 35%35\% to a decimal (0.350.35) and multiply by the total goal.
3
Calculate the amount raised in Week 3 using the decimal 0.150.15.
0.15×$2,400=$3600.15 \times \$2,400 = \$360
Multiply the decimal fraction directly by the total goal.
4
Sum the amounts raised during the first three weeks and subtract from the total goal.
Total raised = $900+$840+$360=$2,100\$900 + \$840 + \$360 = \$2,100; Remaining needed = $2,400$2,100=$300\$2,400 - \$2,100 = \$300
Subtracting the total funds collected so far from the target yields the remaining requirement.

Anahtar Kavram

Fractions, Decimals, and Percentages
Soru 5335Soru

An electric vehicle charging station delivers energy at a constant rate of kk kilowatt-hours (kWh) per hour. If a vehicle receives a total of 48 kWh48\text{ kWh} of energy after charging for 1.51.5 hours, which of the following equations can be solved to find kk?

Cevabı ve açıklamayı göster

Cevap: 1.5k=481.5k = 48

Cevap

1.5k=481.5k = 48
Multiplying the charging rate of kk kWh per hour by the charging duration of 1.51.5 hours yields the total energy of 4848 kWh. Thus, 1.5k=481.5k = 48 correctly models the situation.

Adım Adım Çözüm

1
Identify the relationship between rate, time, and total amount.
Total energy = (charging rate) ×\times (time in hours)
The unit rate in kWh per hour multiplied by hours yields total kWh.
2
Substitute the given values into the relationship.
48=k×1.548 = k \times 1.5, or 1.5k=481.5k = 48
The total energy is 4848, the rate is kk, and time is 1.51.5 hours.

Anahtar Kavram

Formulating one-step multiplication equations from unit rate scenarios
Tahmini Süre:1m 0s
Soru 5336Soru

At a community theater performance, the ratio of adult tickets sold to student tickets sold was 5:35 : 3. After 1212 additional student tickets were sold and no additional adult tickets were sold, the ratio of adult tickets to student tickets became 4:34 : 3. How many total tickets (adult and student combined) were sold originally?

Cevabı ve açıklamayı göster

Cevap: 128

Cevap

128 total tickets were sold originally.
Let the original number of adult tickets be 5x5x and student tickets be 3x3x. After 12 student tickets are added, the new ratio is frac5x3x+12=frac43\\frac{5x}{3x + 12} = \\frac{4}{3}. Cross-multiplying gives 15x=12x+4815x = 12x + 48, which simplifies to 3x=483x = 48 and x=16x = 16. The original total number of tickets is 5x+3x=8x=8(16)=1285x + 3x = 8x = 8(16) = 128.

Adım Adım Çözüm

1
Define variables for the original quantities based on the initial ratio.
Let the original number of adult tickets be 5x5x and the original number of student tickets be 3x3x, where xx is a common multiplier. The original total is 5x+3x=8x5x + 3x = 8x.
Representing a ratio 5:35 : 3 with a multiplier allows algebraic manipulation when quantities change.
2
Set up an equation representing the new ratio after adding 12 student tickets.
frac5x3x+12=frac43\\frac{5x}{3x + 12} = \\frac{4}{3}
The number of adult tickets remains 5x5x, while student tickets increase by 12 to 3x+123x + 12.
3
Solve for the multiplier xx using cross-multiplication.
3(5x)=4(3x+12)implies15x=12x+48implies3x=48impliesx=163(5x) = 4(3x + 12) \\implies 15x = 12x + 48 \\implies 3x = 48 \\implies x = 16.
Equating cross-products isolates xx to find the value of one ratio unit.
4
Calculate the original total number of tickets.
textOriginalTotal=8x=8(16)=128\\text{Original Total} = 8x = 8(16) = 128.
Multiplying the common multiplier by 8 yields the combined original total.

Anahtar Kavram

Solving multi-step proportion problems involving changing part-to-part ratios.
Tahmini Süre:1m 15s
Soru 5337Soru

Read the passage below:

Before glaciologist Dr. Lars Lindqvist deployed the deep-ice thermal probe at the Maud Rise station in 2014, his team completed two seasons of radar mapping to identify stable subglacial channels. That mapping effort had been delayed for a year when severe blizzards forced an emergency evacuation of their base camp in 2011. Lindqvist's initial field surveys, conducted in 2009, had established the baseline ice-thickness measurements that justified the original grant proposal. Following the successful probe deployment, the team published their preliminary melt-rate analysis in 2016, confirming their subglacial water flow models.

Based on the passage, what is the correct chronological sequence of events in Dr. Lindqvist's research program, from earliest to latest?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct chronological order of events is: 1) Dr. Lindqvist conducted initial field surveys to establish baseline ice-thickness measurements (2009), 2) Severe blizzards forced an emergency evacuation of the team's base camp (2011), 3) The research team deployed the deep-ice thermal probe at the Maud Rise station (2014), and 4) The team published their preliminary melt-rate analysis (2016).
The text explicitly anchors each event to a specific year: initial field surveys took place in 2009, the base camp evacuation occurred during blizzards in 2011, the thermal probe deployment happened in 2014, and the publication of the melt-rate analysis occurred in 2016. Arranging these years sequentially yields the accurate timeline.

Adım Adım Çözüm

1
Identify the explicit dates associated with each event mentioned in the text.
Initial surveys occurred in 2009; base camp evacuation occurred in 2011; probe deployment occurred in 2014; melt-rate analysis was published in 2016.
The passage uses non-linear narrative structure (beginning with the 2014 deployment and flashing back to 2011 and 2009 before concluding with 2016), so chronological sequence must be determined by extracting the explicit dates.
2
Arrange the extracted dates in chronological order from earliest year to latest year.
2009 -> 2011 -> 2014 -> 2016.
Numerical progression of years provides the exact timeline requested by the question.
3
Match each ordered date back to its corresponding event item.
1. Initial field surveys (2009), 2. Emergency evacuation (2011), 3. Thermal probe deployment (2014), 4. Melt-rate analysis published (2016).
This confirms the correct chronological alignment.

Anahtar Kavram

Determining Stated Sequence of Events
Soru 5338Soru

A group of biochemical researchers measured the enzymatic breakdown rate of cellulose (in mg/Lmin\text{mg/L}\cdot\text{min}) by three bacterial strains (Strain X, Strain Y, and Strain Z) across three different pH environments (5.05.0, 6.06.0, and 7.07.0) at a constant temperature of 37C37^\circ\text{C}. The results are recorded in the table below:

StrainBreakdown Rate at pH 5.05.0Breakdown Rate at pH 6.06.0Breakdown Rate at pH 7.07.0
Strain X121218182424
Strain Y151525253535
Strain Z8814142020

True or False: The average enzymatic breakdown rate across all three pH environments for Strain Y is 5 mg/Lmin5\text{ mg/L}\cdot\text{min} greater than the average breakdown rate for Strain X.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is False because the average breakdown rate for Strain Y (25 mg/Lmin25\text{ mg/L}\cdot\text{min}) exceeds that of Strain X (18 mg/Lmin18\text{ mg/L}\cdot\text{min}) by 7 mg/Lmin7\text{ mg/L}\cdot\text{min}, not 5 mg/Lmin5\text{ mg/L}\cdot\text{min}.
The correct response is False because computing the mean breakdown rates yields 18 mg/Lmin18\text{ mg/L}\cdot\text{min} for Strain X and 25 mg/Lmin25\text{ mg/L}\cdot\text{min} for Strain Y. Subtracting 1818 from 2525 gives a difference of 7 mg/Lmin7\text{ mg/L}\cdot\text{min}, rendering the statement claiming a difference of 5 mg/Lmin5\text{ mg/L}\cdot\text{min} mathematically incorrect.

Adım Adım Çözüm

1
Calculate the average breakdown rate for Strain X across all three pH levels.
Average for Strain X = 12+18+243=543=18 mg/Lmin\frac{12 + 18 + 24}{3} = \frac{54}{3} = 18\text{ mg/L}\cdot\text{min}.
To determine the overall mean performance of Strain X across the tested environments.
2
Calculate the average breakdown rate for Strain Y across all three pH levels.
Average for Strain Y = 15+25+353=753=25 mg/Lmin\frac{15 + 25 + 35}{3} = \frac{75}{3} = 25\text{ mg/L}\cdot\text{min}.
To determine the overall mean performance of Strain Y across the tested environments.
3
Subtract the average rate of Strain X from the average rate of Strain Y.
Difference = 2518=7 mg/Lmin25 - 18 = 7\text{ mg/L}\cdot\text{min}.
To test the claim that the average for Strain Y is 5 mg/Lmin5\text{ mg/L}\cdot\text{min} greater than Strain X.

Anahtar Kavram

Calculating mean values from tabular experimental data and finding differences between summary statistics.
Soru 5339Soru

A nursery technician prepares a liquid fertilizer mixture using nitrogen, phosphorus, and potassium in a volume ratio of 4:2:14 : 2 : 1, respectively. A storage tank currently holds 35 liters35\text{ liters} of this mixture. If the technician adds 6 liters6\text{ liters} of pure nitrogen to the tank, what is the ratio of nitrogen to phosphorus in the resulting mixture?

Cevabı ve açıklamayı göster

Cevap: 13:513 : 5

Cevap

The ratio of nitrogen to phosphorus in the resulting mixture is 13:513 : 5.
The original 35 liters35\text{ liters} contains 77 equal parts of 5 liters5\text{ liters} each. Nitrogen represents 44 parts (20 liters20\text{ liters}) and phosphorus represents 22 parts (10 liters10\text{ liters}). Adding 6 liters6\text{ liters} of nitrogen brings the nitrogen amount to 26 liters26\text{ liters}. Comparing 26 liters26\text{ liters} of nitrogen to 10 liters10\text{ liters} of phosphorus yields the ratio 26:1026 : 10, which simplifies to 13:513 : 5.

Adım Adım Çözüm

1
Find the total number of parts in the original ratio.
4+2+1=7 total parts4 + 2 + 1 = 7\text{ total parts}.
To determine the volume of each component, calculate the total proportion of the mixture.
2
Calculate the initial volume of nitrogen and phosphorus in 35 liters35\text{ liters} of solution.
\text{Nitrogen} = \frac{4}{7} \times 35 = 20\text{ liters}; \quad \text{Phosphorus} = \frac{2}{7} \times 35 = 10\text{ liters}.
Multiply each component's fraction by the total volume of 35 liters35\text{ liters}.
3
Add 6 liters6\text{ liters} to the initial volume of nitrogen.
\text{New Nitrogen volume} = 20 + 6 = 26\text{ liters}.
Only nitrogen is added to the tank, while phosphorus remains unchanged at 10 liters10\text{ liters}.
4
Write and simplify the new ratio of nitrogen to phosphorus.
\frac{26}{10} = \frac{13}{5} \implies 13 : 5.
Divide both terms by their greatest common factor, 22.

Anahtar Kavram

Partitioning a total quantity into parts using extended ratios and adjusting part quantities.
Soru 5340Soru

A technology firm allocated its annual equipment budget among three divisions. The engineering division received 38\frac{3}{8} of the total budget, and the operations division received 30%30\% of the total budget. The remaining $52,000\$52,000 was allocated to the design division. What was the total equipment budget, in dollars, for the technology firm?

Cevabı ve açıklamayı göster

Cevap: 160000

Cevap

The total equipment budget for the technology firm was $160,000 dollars.
Converting both allocated parts into decimals gives 38=0.375\frac{3}{8} = 0.375 for engineering and 30%=0.3030\% = 0.30 for operations. Combined, these two divisions account for 0.375+0.30=0.6750.375 + 0.30 = 0.675 (or 67.5%67.5\%) of the total budget. The remaining fraction for the design division is 10.675=0.3251 - 0.675 = 0.325 (or 32.5%32.5\%). Dividing the design budget of $52,000\$52,000 by 0.3250.325 yields the total budget of $160,000\$160,000.

Adım Adım Çözüm

1
Convert the percentage and fraction to equivalent decimal values.
Engineering receives 38=0.375\frac{3}{8} = 0.375, and operations receives 30%=0.3030\% = 0.30.
Expressing all portions in decimal form allows for straightforward addition and subtraction.
2
Sum the portions allocated to the engineering and operations divisions.
0.375+0.30=0.6750.375 + 0.30 = 0.675.
This finds the total proportion of the budget that has already been accounted for.
3
Determine the remaining decimal portion allocated to the design division.
10.675=0.3251 - 0.675 = 0.325.
The complete budget represents 1 whole (100%). Subtracting the allocated portions yields the design division's share.
4
Divide the dollar amount of the design division by its decimal portion to calculate the total budget.
52,0000.325=160,000\frac{52,000}{0.325} = 160,000.
Since Design Portion×Total Budget=Design Amount\text{Design Portion} \times \text{Total Budget} = \text{Design Amount}, dividing the amount by the decimal portion gives the total budget.

Anahtar Kavram

Solving multi-step applied word problems by converting between fractions, decimals, and percentages to determine an unknown total value.
ÖncekiSayfa 267 / 278Sonraki
Tüm alıştırma soruları — ACT | Examkin