Tüm alıştırma soruları

5215 soru

Tüm türler5,215 Çoktan seçmeli2,665 Çoklu seçim6 Doğru / Yanlış260 Sayısal512 Eşleştirme930 Sıralama396 Boşluk doldurma397 Kısa cevap49

Soru 2361Soru →

Match each everyday tool to its correct lever classification based on the relative positions of the fulcrum, effort, and load.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Scissors match with First-class lever, a nutcracker matches with Second-class lever, and a swinging baseball bat matches with Third-class lever.

Each tool can be classified by identifying the component in the middle: Scissors have the fulcrum in the middle (Class 1), nutcrackers have the load in the middle (Class 2), and baseball bats have the effort applied in the middle (Class 3).

Adım Adım Çözüm

Analyze a pair of scissors

The fulcrum is in the middle, making it a first-class lever.

First-class levers always have the fulcrum positioned between the effort and the load.

Analyze a nutcracker

The load is in the middle, making it a second-class lever.

Second-class levers always have the load positioned between the fulcrum and the effort.

Analyze a swinging baseball bat

The effort is in the middle, making it a third-class lever.

Third-class levers always have the effort positioned between the fulcrum and the load.

Anahtar Kavram

Lever classes are defined by the component that is positioned in the middle: Fulcrum (1st class), Load (2nd class), or Effort (3rd class).

Tahmini Süre:45s

Soru 2362Soru →

A technician is using a $2\text{--}3\text{ inch}$ vernier outside micrometer to measure the diameter of a crankshaft main journal. The sleeve reveals the major graduation mark $7$ and two additional $0.025\text{-inch}$ subdivision marks past the $7$ . The thimble graduation aligned with the sleeve index line indicates $19$ , and the vernier scale on the sleeve aligns with a thimble mark at the $4$ line. What is the final measured diameter of the crankshaft journal?

2.7444\text{ inches}

2.7694\text{ inches}

2.7194\text{ inches}

2.7944\text{ inches}

Cevabı ve açıklamayı göster

Cevap: $2.7694\text{ inches}$

Cevap

2.7694\text{ inches}

The correct diameter is

2.7694\text{ inches}

. On a

2\text{--}3\text{ inch}

micrometer, the measurement starts at

2.000\text{ inches}

. The major mark

7

on the sleeve contributes

0.700\text{ inch}

, the two visible

0.025\text{-inch}

subdivisions add

0.050\text{ inch}

, the thimble line

19

adds

0.019\text{ inch}

, and the aligned vernier mark

4

adds

0.0004\text{ inch}

. Summing these values gives

2.000 + 0.700 + 0.050 + 0.019 + 0.0004 = 2.7694\text{ inches}

Adım Adım Çözüm

Identify the base dimension from the micrometer frame size

Base size

= 2.000\text{ in}

2\text{--}3\text{ inch}

micrometer starts measuring at a baseline of

2.000\text{ inches}

when fully closed.

Read the major sleeve markings and minor subdivision lines

Sleeve reading

= 0.700\text{ in} + (2 \times 0.025\text{ in}) = 0.750\text{ in}

Each numbered line on the sleeve represents

0.100\text{ inch}

, and each subdivision line between numbers represents

0.025\text{ inch}

Read the thimble scale graduation aligned with the sleeve index line

Thimble reading

= 19 \times 0.001\text{ in} = 0.019\text{ in}

Each graduation around the circumference of the thimble represents one-thousandth of an inch (

0.001\text{ in}

Read the vernier scale on the sleeve for ten-thousandths resolution

Vernier reading

= 4 \times 0.0001\text{ in} = 0.0004\text{ in}

The matching vernier line on the sleeve adds ten-thousandths of an inch (

0.0001\text{ in}

) precision.

Calculate the total measured diameter

2.000\text{ in} + 0.700\text{ in} + 0.050\text{ in} + 0.019\text{ in} + 0.0004\text{ in} = 2.7694\text{ in}

Adding all scale components together provides the final precision measurement.

Anahtar Kavram

Precision scale reading using a vernier outside micrometer with sleeve, thimble, and ten-thousandths vernier graduations.

Tahmini Süre:1m 30s

Soru 2363Soru →

An automotive technician is performing critical tolerance checks during an engine and chassis overhaul. Match each precision measurement instrument on the left to its most appropriate automotive inspection task on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Dial Indicator matches Measuring lateral runout on a brake rotor surface; Feeler Gauge matches Checking valve lash clearance; Telescoping Gauge matches Transferring an internal cylinder bore diameter; Depth Micrometer matches Measuring cylinder liner protrusion height.

Each instrument is engineered for a specific geometric inspection mode: dial indicators track surface variance and runout during rotation; feeler gauges gauge precise physical air gaps between mating parts; telescoping gauges expand inside internal bores to capture internal diameters for outside micrometer verification; depth micrometers utilize a wide reference base to measure stepped depths and component protrusions.

Adım Adım Çözüm

Analyze the mechanical motion and measurement type for each automotive inspection task.

Identify tasks requiring continuous surface deflection tracking, narrow clearance measurement, internal dimension transfer, and stepped flat-plane depth measurement.

Matching precision instruments requires pairing the geometric constraint of the part with the design capability of the tool.

Pair continuous rotational deflection with the contact plunger instrument.

The dial indicator is matched to brake rotor lateral runout.

The dial indicator's needle translates continuous microscopic plunger displacement into direct thousandths of an inch or hundredths of a millimeter.

Pair narrow clearance insertion with calibrated flexible steel leaves.

The feeler gauge is matched to valve lash clearance.

Calibrated thickness strips can slide between closely spaced flat or curved surfaces to evaluate clearance by tactile drag.

Pair internal bore geometry with the expanding indirect transfer gauge.

The telescoping gauge is matched to transferring cylinder bore diameter.

Telescoping gauges enter deep engine bores, expand to contact opposing cylinder walls, lock rigid, and transfer the size to an outside micrometer.

Pair reference deck protrusion measurement with the flat-base micrometer.

The depth micrometer is matched to cylinder liner protrusion height.

The flat base rests securely across the cylinder block deck while the extension rod measures the step height to the top of the liner flange.

Anahtar Kavram

Precision Measurement Instrument Selection and Application

Tahmini Süre:1m 30s

Soru 2364Soru →

During a concrete pour for a structural foundation, a crew considers adding extra water to a stiff batch to make it easier to place and finish. If excess water is added beyond the engineered mix design ratio, what is the primary effect on the cured concrete?

It accelerates the chemical hydration process, allowing the concrete to reach its maximum design strength much faster.

It lowers the compressive strength and increases the porosity and cracking potential of the hardened slab.

It increases the tensile bond strength between the cured cement paste and embedded steel rebar.

It eliminates volume shrinkage during curing, removing the requirement for sawed control joints.

Cevabı ve açıklamayı göster

Cevap: It lowers the compressive strength and increases the porosity and cracking potential of the hardened slab.

Cevap

It lowers the compressive strength and increases the porosity and cracking potential of the hardened slab.

Concrete strength depends directly on the water-cement (

w/c

) ratio. Adding excess water beyond what is required for chemical hydration dilutes the cement paste. When the unreacted water evaporates, it leaves behind capillary voids and porous channels that substantially decrease compressive strength and increase susceptibility to cracking.

Adım Adım Çözüm

Analyze the role of water in concrete mix design.

Only a specific amount of water is chemically required to hydrate the Portland cement; additional water exists solely as a workability lubricant.

Understanding the water-cement (

w/c

) ratio is critical for predicting concrete durability and load capacity.

Determine the physical consequence of excess water evaporating during and after the curing phase.

Unreacted water evaporates, creating microscopic capillary pores and voids throughout the hardened cement matrix.

Porosity directly reduces structural density, leading to lower compressive strength and higher permeability.

Identify the primary structural impact on the finished concrete product.

The cured concrete suffers from reduced compressive strength, higher susceptibility to freeze-thaw damage, and increased drying shrinkage cracking.

Maintaining the lowest practical water-cement ratio ensures maximum strength and longevity.

Anahtar Kavram

Water-Cement Ratio and Concrete Compressive Strength

Tahmini Süre:1m 0s

Soru 2365Soru →

A person uses a straight-handled snow shovel to lift a $20\text{-pound}$ load of snow. The person's top hand acts as a stationary pivot (fulcrum) at the very end of the handle. Their lower hand applies an upward lifting effort $10\text{ inches}$ down the shaft from the top hand. If the center of the snow load is located $40\text{ inches}$ further down the shaft from the lower hand, what is the upward lifting force required by the lower hand to hold the shovel horizontally?

4\text{ lbs}

20\text{ lbs}

80\text{ lbs}

100\text{ lbs}

Cevabı ve açıklamayı göster

Cevap: $100\text{ lbs}$

Cevap

100\text{ lbs}

In a third-class lever, the effort is located between the fulcrum and the load. The distance from the fulcrum to the effort is

10\text{ inches}

, and the distance from the fulcrum to the load is

10 + 40 = 50\text{ inches}

. Setting the torques equal gives

F_E \times 10 = 20 \times 50

. Solving for

F_E

results in

100\text{ lbs}

Adım Adım Çözüm

Identify the lever class and the locations of the fulcrum, effort, and load.

The shovel acts as a third-class lever. Fulcrum is at the top hand, effort is applied at the lower hand, and load is at the snow.

This establishes the pivot point for calculating torque (moments).

Determine the effort arm (

d_E

) and the load arm (

d_L

d_E = 10\text{ inches}

. The load arm

d_L

is the total distance from the fulcrum to the load:

10\text{ inches} + 40\text{ inches} = 50\text{ inches}

Torque is always calculated as force multiplied by the distance from the fulcrum.

Apply the principle of moments (Torque equilibrium) to find the effort force (

F_E

F_E \times d_E = F_L \times d_L \Rightarrow F_E \times 10 = 20 \times 50 \Rightarrow F_E \times 10 = 1000 \Rightarrow F_E = 100\text{ lbs}

For the shovel to be held horizontally in equilibrium, the upward torque from the effort must equal the downward torque from the load.

Anahtar Kavram

Third-Class Levers and Torque Balance

Tahmini Süre:1m 0s

Soru 2366Soru →

In concrete construction, chemical admixtures are added to concrete batches to modify specific performance properties. Match each concrete admixture to its primary functional effect.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Air-entraining agent matches with creating microscopic bubbles for freeze-thaw resistance; Superplasticizer matches with increasing workability without extra water; Retarder matches with slowing hydration in hot weather; Accelerator matches with shortening setting time and speeding early strength gain.

Each admixture fulfills a specialized role in concrete formulation: air-entraining agents generate micro-bubbles to prevent spalling from freezing moisture; superplasticizers boost slump and ease of placement without compromising the water-cement ratio; set retarders prolong working time when high temperatures cause premature stiffening; and accelerators hasten hydration for rapid strength gain in cold temperatures.

Adım Adım Çözüm

Analyze the operational role of each concrete admixture in trade practice.

Air-entraining agents generate microscopic voids to protect against frost damage; superplasticizers enhance fluid flow without decreasing mix strength; retarders extend workability under high temperatures; accelerators speed up hydration in cold weather.

Each chemical additive is engineered to control a specific physical or chemical behavior of fresh and hardened concrete.

Pair each admixture from the left column with its corresponding performance description on the right column.

All four items are accurately paired based on their defined functions in concrete technology.

Correct alignment demonstrates understanding of building materials and mix design adjustments for diverse site conditions.

Anahtar Kavram

Functions and applications of concrete chemical admixtures (air-entrainers, water reducers/superplasticizers, retarders, and accelerators)

Tahmini Süre:1m 15s

Soru 2367Soru →

A mason is assembling a reinforced load-bearing wall using hollow concrete masonry units (CMU) and needs to encase the vertical steel rebar placed inside the open cells. Which cementitious material is specifically formulated with high slump and fluid workability to completely fill these structural cavities without leaving air pockets?

Bedding mortar

Gypsum plaster

Masonry grout

Surface bonding cement

Cevabı ve açıklamayı göster

Cevap: Masonry grout

Cevap

Masonry grout is the specialized, high-fluidity mixture engineered to fill hollow concrete masonry cores and bond structural rebar.

Masonry grout is specifically proportioned with a high water-to-cement ratio and small aggregates (such as pea gravel or coarse sand) to give it a high slump (typically 8 to 11 inches). This fluid consistency allows it to be poured or pumped into the hollow cells of concrete masonry units, fully surrounding steel rebar and bonding the assembly into a monolithic structural unit.

Adım Adım Çözüm

Analyze the functional requirement of filling vertical block cavities containing reinforcement steel.

The application requires a fluid, high-slump cementitious mixture that can flow around rebar and fill voids without creating air pockets or honeycombing.

Masonry units create deep vertical channels where regular thick mixes would bridge and fail to fully encapsulate the steel.

Differentiate between jointing mortar, structural grout, plaster, and surface coatings.

Masonry grout is specifically formulated with higher water content and fine aggregates to facilitate complete void filling and structural load transfer.

Mortar is formulated to be stiff enough to hold block elevation during placement, while grout is formulated to flow freely.

Anahtar Kavram

Distinction between masonry grout (void filling and reinforcement encapsulation) and masonry mortar (unit bonding and jointing)

Tahmini Süre:50s

Soru 2368Soru →

Match each specific automotive machine shop measurement task to the precision instrument most appropriate for performing it.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Runout/backlash matches to Dial Indicator; transferring bore ID matches to Telescoping Gauge; ring end gap matches to Feeler Gauge; blind hole depth matches to Depth Micrometer; and camshaft lobe dimensions match to Outside Micrometer.

Each precision instrument in an automotive shop is engineered for specific geometric challenges. Dial indicators track dynamic travel and runout; telescoping gauges transfer hard-to-reach internal dimensions; feeler gauges measure static narrow gaps; depth micrometers measure downward distance from a reference plane; and outside micrometers provide the highest precision for external diameters.

Adım Adım Çözüm

Analyze the requirement for measuring lateral runout and gear backlash.

Identified Dial Indicator.

These tasks require measuring dynamic movement or play between components, which is uniquely suited to a dial indicator mounted on a magnetic base.

Analyze the requirement for measuring a deep lifter bore.

Identified Telescoping Gauge.

Calipers cannot reach deep bores accurately. A telescoping gauge is a transfer tool designed specifically to reach into deep bores, lock the dimension, and be measured externally.

Analyze the requirement for measuring ring end gap.

Identified Feeler (Thickness) Gauge.

This task requires sliding a known physical thickness into a narrow clearance gap, which is the exact function of a feeler gauge.

Analyze the requirement for measuring blind hole depth.

Identified Depth Micrometer.

A depth micrometer sits flat on a machined surface and extends a rod downward, providing higher precision than the depth rod of a standard caliper.

Analyze the requirement for measuring camshaft lobes.

Identified Outside Micrometer.

This is a highly precise external measurement requiring the rigid frame and fine thread pitch of an outside micrometer.

Anahtar Kavram

Selecting the correct precision measurement instrument based on physical geometry, accessibility, and the specific automotive tolerance being checked.

Soru 2369Soru →

Determine if the following statement is true or false: When a vehicle travels along a flat, circular track at a constant speed, a real outward force known as centrifugal force actively pushes the vehicle away from the center of the turn.

Doğru

Yanlış

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False

The sensation of being pushed outward is due to the vehicle's inertia (its tendency to travel in a straight line), not an actual outward force. The only real applied force acting in the radial direction is the inward centripetal force, which is supplied by the friction between the tires and the road.

Adım Adım Çözüm

Analyze the forces acting on the vehicle during circular motion.

Identify that the real forces acting on the vehicle are gravity (downward), normal force (upward), and friction (inward toward the center).

To distinguish between real, applied physical forces and apparent forces.

Evaluate the concept of centrifugal force.

Determine that the outward 'push' felt by passengers is not a real force, but rather the result of the vehicle's inertia resisting the inward change in direction.

To address the common misconception stated in the problem.

Anahtar Kavram

The difference between real centripetal force and apparent centrifugal force due to inertia.

Soru 2370Soru →

A technician needs to raise the front end of a vehicle to perform an undercarriage inspection. Arrange the following steps in the correct chronological order to safely lift and support the vehicle.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with immobilizing the vehicle and chocking the wheels, raising the vehicle with a floor jack at the specified lift point, placing jack stands and lowering the vehicle onto them, and finally verifying stability before beginning inspection.

The correct sequence ensures full safety at each phase: first immobilizing the vehicle to prevent rolling, second using a hydraulic jack only for dynamic lifting at reinforced points, third transferring the load onto mechanical jack stands for static support, and fourth performing a physical stability check prior to work.

Adım Adım Çözüm

Immobilize the vehicle by setting the parking brake and placing wheel chocks on the wheels remaining on the ground.

The vehicle is stabilized against unwanted forward or backward movement during lifting.

Preventing rolling is the essential first safety measure before elevating any portion of a vehicle.

Place the hydraulic floor jack under the designated structural lift point and pump the handle to elevate the front end.

The vehicle is raised to the necessary clearance height.

Using the manufacturer-specified lifting location prevents structural damage to body panels or floorboards.

Slide jack stands under the frame or pinch-weld support locations and carefully release hydraulic pressure to lower the vehicle onto the stands.

The vehicle weight is transferred from the hydraulic jack to positive mechanical supports.

Hydraulic jacks are lifting devices only and can lose hydraulic pressure unexpectedly; jack stands are required for static load holding.

Apply gentle physical force to the bumper or fender to check for any shifting or instability.

Confirmation that the vehicle is securely seated and will not slip or topple.

Verifying stability before crawling underneath ensures the technician is protected from crushing hazards.

Anahtar Kavram

Proper procedural sequence for lifting, mechanically supporting, and verifying the stability of an automotive load

Tahmini Süre:45s

Soru 2371Soru →

A technician is preparing a flat steel workpiece for precision drilling. The operation requires scribing a reference line exactly $1.25\text{ inches}$ parallel to a machined reference edge, locating an intersecting cross-mark, and preparing a starting indentation to prevent a twist drill bit from wandering. Which layout tool combination and procedure should be used?

Set an outside caliper to

1.25\text{ inches}

to score the line along the edge, then create the starting indentation by striking a pin punch with a mallet.

Adjust the square head of a combination square to

1.25\text{ inches}

to guide a scriber along the edge, then mark the intersection with a prick punch before enlarging it with a center punch.

Lock a sliding T-bevel at

1.25\text{ inches}

using a carpenter's pencil to mark the line, then establish the starting dimple using a drift punch.

Align a framing square along the workpiece edge to draw a line with marking chalk, then establish the starting mark by tapping a cold chisel into the layout point.

Cevabı ve açıklamayı göster

Cevap: Adjust the square head of a combination square to $1.25\text{ inches}$ to guide a scriber along the edge, then mark the intersection with a prick punch before enlarging it with a center punch.

Cevap

Adjust the square head of a combination square to

1.25\text{ inches}

to guide a scriber along the edge, then mark the intersection with a prick punch before enlarging it with a center punch.

The combination square's square head is the standard tool for measuring and guiding a scriber at a constant offset parallel to a flat reference edge. In metal layout, establishing hole centers requires a two-step punch procedure: first, a sharp prick punch (ground to

30^\circ - 60^\circ

) is positioned precisely at the intersection of scribed lines under close inspection; second, a wider center punch (ground to

90^\circ

) expands the indentation so the chisel point of a twist drill seats cleanly without wandering.

Adım Adım Çözüm

Select and configure the parallel edge-referencing layout tool.

The square head of a combination square is locked onto the blade at

1.25\text{ inches}

so the anvil face rides smoothly along the reference edge of the workpiece.

Combination squares maintain a rigid

90^\circ

orientation against a finished edge, providing a dependable guide for scribing an exact parallel line.

Establish the exact coordinate intersection using a fine-point marking tool.

A hardened steel scriber draws a crisp hairline in layout fluid, and a prick punch with a sharp

30^\circ

60^\circ

point is lightly tapped at the cross-line intersection.

The narrow point of a prick punch allows easy visual alignment into the scribed cross-hairs without slipping or deflecting across the metal surface.

Enlarge the indentation to support drill startup.

A center punch ground to a

90^\circ

conical angle is placed directly into the prick punch mark and struck firmly.

The wider

90^\circ

pocket seats the chisel edge of a standard twist drill, ensuring the drill centers immediately upon contact rather than skating across the workpiece.

Anahtar Kavram

Standard shop layout requires using combination squares with scribers for accurate edge-parallel lines, followed by a two-stage punching process using a prick punch for precise location and a center punch for drill bit seating.

Tahmini Süre:1m 30s

Soru 2372Soru →

Match each lever configuration with its corresponding mechanical advantage and force direction properties.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Second-class levers multiply force without reversing direction. Third-class levers multiply distance without reversing direction. First-class levers with the fulcrum near the load multiply force and reverse direction. First-class levers with a centered fulcrum only reverse direction.

The correct pairings rely on evaluating two factors: whether the fulcrum sits between the effort and load (which determines if force direction is reversed), and the relative lengths of the effort and load arms (which determines if the lever multiplies force or distance).

Adım Adım Çözüm

Determine if the lever configuration reverses the direction of the applied force.

First-class levers reverse the direction of force. Second and third-class levers do not reverse the direction.

The fulcrum's position relative to the effort and load determines directional changes.

Compare the length of the effort arm to the load arm for each configuration.

Second-class levers and offset first-class levers have longer effort arms. Third-class levers have shorter effort arms. Centered first-class levers have equal arms.

The ratio of the effort arm to the load arm dictates the mechanical advantage (MA).

Match the mechanical advantage outcome to the lever configuration.

Longer effort arm = MA > 1 (multiplies force). Shorter effort arm = MA < 1 (multiplies distance/speed). Equal arms = MA of 1.

This establishes the direct relationship between physical lever structure and mechanical properties.

Anahtar Kavram

Mechanical Advantage of Lever Configurations

Soru 2373Soru →

Four different vehicles each have a total loaded weight of $6,000$ pounds. Arrange the following vehicles in order based on the amount of weight supported by their REAR axle, from greatest weight to least weight.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order from greatest to least rear axle load is: Delivery van (

4,000

lbs), Pickup truck (

3,500

lbs), Flatbed truck (

3,000

lbs), and Box truck (

1,500

lbs).

To find the load on the rear axle, the vehicle is treated as a beam where the front axle acts as the pivot (fulcrum). The rear axle load is found by taking the proportion of the center of gravity's distance from the front axle relative to the entire wheelbase, and multiplying by the total weight. The delivery van has the highest proportion (

\frac{10}{15} = 66.7\%

), followed by the pickup truck (

\frac{7}{12} = 58.3\%

), flatbed truck (

\frac{7}{14} = 50\%

), and box truck (

\frac{4}{16} = 25\%

Adım Adım Çözüm

Determine the formula for load distribution on the rear axle.

Rear Axle Load =

\text{Total Weight} \times (\frac{\text{Distance from Front Axle}}{\text{Wheelbase}})

The vehicle acts as a beam supported at both ends (the axles). The load on the rear support is directly proportional to how far the center of gravity is from the front support.

Calculate the rear axle load for the delivery van.

6,000\text{ lbs} \times (\frac{10\text{ ft}}{15\text{ ft}}) = 6,000 \times \frac{2}{3} = 4,000\text{ lbs}

The center of gravity is explicitly given as

10

feet behind the front axle.

Calculate the rear axle load for the pickup truck.

Distance from front =

12\text{ ft} - 5\text{ ft} = 7\text{ ft}

. Load =

6,000\text{ lbs} \times (\frac{7\text{ ft}}{12\text{ ft}}) = 3,500\text{ lbs}

The center of gravity is

5

feet forward of the rear axle, meaning it is

7

feet behind the front axle.

Calculate the rear axle load for the flatbed truck.

6,000\text{ lbs} \times (\frac{7\text{ ft}}{14\text{ ft}}) = 6,000 \times \frac{1}{2} = 3,000\text{ lbs}

The center of gravity is

7

feet behind the front axle, exactly in the middle of the

14

-foot wheelbase.

Calculate the rear axle load for the box truck.

Distance from front =

16\text{ ft} - 12\text{ ft} = 4\text{ ft}

. Load =

6,000\text{ lbs} \times (\frac{4\text{ ft}}{16\text{ ft}}) = 1,500\text{ lbs}

The center of gravity is

12

feet forward of the rear axle, meaning it is

4

feet behind the front axle.

Arrange the vehicles based on the calculated loads.

Delivery van (

4,000

lbs) > Pickup truck (

3,500

lbs) > Flatbed truck (

3,000

lbs) > Box truck (

1,500

lbs).

The question asks for the order from greatest weight to least weight supported by the rear axle.

Anahtar Kavram

Load distribution on a beam with two supports (axles) is inversely proportional to the distance from the center of gravity to each support.

Alternatif Yöntem

You can calculate the weight on the front axle first by using the distance to the rear axle divided by the total wheelbase, then subtract that front axle load from the

6,000

lbs total weight to find the rear axle load.

Tahmini Süre:1m 30s

Soru 2374Soru →

As a race car travels at high speeds, the air flowing through the narrow clearance between the car's flat underbody and the track surface accelerates. According to the principles of fluid dynamics, this increase in air velocity creates a region of elevated static pressure that pushes upward against the bottom of the car.

Doğru

Yanlış

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False

The statement is false. According to Bernoulli's principle, an increase in fluid velocity results in a decrease in static pressure. Therefore, the fast-moving air under the race car creates a low-pressure zone that produces downforce, rather than an upward push.

Adım Adım Çözüm

Analyze the change in air velocity under the vehicle.

The narrow gap between the car's underbody and the track restricts the airflow area, causing the air velocity to increase in order to maintain a continuous flow.

The continuity equation dictates that fluid velocity must increase when the cross-sectional area of the flow path decreases.

Relate the increased velocity to static pressure using Bernoulli's principle.

According to Bernoulli's principle, the higher kinetic energy of the fast-moving air results in a simultaneous decrease in static pressure.

In a flowing fluid system, an increase in velocity is accompanied by a drop in static pressure to conserve total energy.

Determine the direction of the resulting force on the vehicle.

Because the static pressure under the car decreases, the relatively higher ambient pressure above the car pushes it downward, creating downforce rather than upward lift.

Objects are naturally pushed toward regions of lower pressure.

Anahtar Kavram

Bernoulli's Principle and the Continuity Equation

Soru 2375Soru →

After raising a vehicle to the desired height using a hydraulic floor jack, which safety procedure must be completed before performing any work underneath the vehicle?

Keep the hydraulic jack pressurized and position cinder blocks under the suspension arms for extra stability.

Leave the vehicle supported solely by the hydraulic floor jack while setting the emergency brake and chocking the remaining wheels.

Support the vehicle with properly rated mechanical jack stands placed at designated lift points and lower the jack weight onto them.

Position adjustable screw jacks directly under the floor pan sheet metal to distribute weight across the body panels.

Cevabı ve açıklamayı göster

Cevap: Support the vehicle with properly rated mechanical jack stands placed at designated lift points and lower the jack weight onto them.

Cevap

Support the vehicle with properly rated mechanical jack stands placed at designated lift points and lower the jack weight onto them.

A hydraulic floor jack is designed strictly to lift a vehicle, never to support it while working underneath. Mechanical jack stands positioned beneath reinforced chassis or designated pinch-weld lift points provide a reliable, positive mechanical support that prevents accidental collapse.

Adım Adım Çözüm

Differentiate between dynamic lifting devices and static load supports.

Identify that hydraulic floor jacks are engineered strictly for raising or lowering loads, not for holding suspended weight during service.

Hydraulic pressure relies on fluid seals and release valves that can suddenly leak or lose pressure.

Select and place the appropriate mechanical support equipment.

Position load-rated jack stands underneath reinforced frame sections or factory-specified lift points.

Mechanical jack stands create a solid, positive-locking support structure that eliminates reliance on hydraulic fluid.

Transfer the load and verify stability.

Slowly lower the floor jack until the vehicle's weight rests fully on the jack stands, then check that the vehicle is stable before entering the work area.

Confirms the vehicle is securely seated and prevents accidental movement while working underneath.

Anahtar Kavram

Lifting and Supporting Loads

Tahmini Süre:45s

Soru 2376Soru →

An artillery cannon fires a heavy projectile horizontally across a testing ground. As expanding gases force the projectile rapidly forward out of the barrel, the entire cannon assembly recoils backward. Which of the following statements correctly describes the relationship between the forces acting on the projectile and the cannon?

The backward force on the cannon is significantly smaller than the forward force on the projectile because the cannon has a larger mass.

The cannon recoils backward because its heavy downward weight acts horizontally to counterbalance the projectile's momentum.

The force accelerating the projectile forward is exactly equal in magnitude to the reaction force pushing the cannon backward.

The backward recoil is caused entirely by the projectile's resting inertia resisting the sudden forward acceleration.

Cevabı ve açıklamayı göster

Cevap: The force accelerating the projectile forward is exactly equal in magnitude to the reaction force pushing the cannon backward.

Cevap

The force acting on the projectile and the reaction force acting on the cannon are exactly equal in magnitude.

Newton's Third Law dictates that all forces exist in pairs. During the firing sequence, the forward action force applied to the projectile generates a simultaneous, equal, and opposite backward reaction force on the cannon. The cannon moves backward much slower only because of its massive size, not because it experiences less force.

Adım Adım Çözüm

Identify the interacting physical bodies in the system.

The expanding explosive gases interact simultaneously with both the projectile and the cannon barrel.

Newton's Third Law applies to the mutual interaction forces between interacting objects.

Apply the principle of action and reaction to the interacting bodies.

The action force pushes the projectile forward, and a simultaneous reaction force pushes the cannon backward.

Forces always occur in equal and opposite pairs.

Evaluate the relationship between force, mass, and the resulting motion.

The forces are perfectly identical in magnitude. The cannon accelerates much less than the projectile only because it has significantly more mass.

Newton's Second Law (

F=ma

) dictates that the same magnitude of force applied to a larger mass results in a smaller acceleration, which often creates the illusion of unequal forces.

Anahtar Kavram

Newton's Third Law (Action/Reaction)

Soru 2377Soru →

A mason is constructing a standard concrete masonry unit (CMU) block wall on a cured concrete footing. Arrange the following construction steps in their correct chronological order from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence is: (1) Spread a full mortar bed joint on the footing, (2) Set, level, and plumb corner lead blocks, (3) Fasten and tension a mason's line between the corner leads, (4) Butter head joints and lay intermediate stretcher blocks, and (5) Strike and compact the mortar joints once thumbprint hard.

Constructing a CMU block wall follows a strict trade sequence: first, spreading the mortar bed on the footing provides the base; second, setting and leveling the corner leads establishes height and vertical plumb; third, pulling a taut mason's line provides the horizontal guide; fourth, buttering and laying stretcher blocks completes the course; and fifth, striking joints when thumbprint hard seals the mortar against moisture.

Adım Adım Çözüm

Spread a continuous bed of mortar along the foundation layout line.

Establishes the bonding layer between the concrete footing and the bottom course of CMU blocks.

The mortar bed cushions and bonds the first masonry course while correcting minor variations in the footing elevation.

Position, plumb, and level the corner lead blocks at both wall ends.

Creates fixed structural references for course height, alignment, and vertical plumb.

Corner leads anchor the dimensions of the wall; without precise corners, intermediate blocks cannot be aligned accurately.

Attach a taut mason's string line between the corner blocks.

Provides a continuous visual guide for the top outer edge of all intermediate blocks.

The line allows rapid, consistent placement of filler blocks without needing a spirit level on every single unit.

Apply mortar to unit flanges (head joints) and set intermediate stretcher blocks to the line.

Completes the solid masonry course with uniform vertical and horizontal joint thickness.

Aligning stretchers directly to the line maintains a straight, true wall plane.

Compress and finish the exposed joints using a jointing tool when the mortar reaches thumbprint hardness.

Creates a dense, concave, weather-tight mortar seal that resists water penetration.

Tooling at thumbprint hardness properly compacts the mortar paste against the block edges without smearing wet mix.

Anahtar Kavram

Concrete Masonry Unit (CMU) Wall Construction Sequence

Tahmini Süre:1m 0s

Soru 2378Soru →

When connecting a newly installed copper pipe to an existing galvanized steel water supply line, which specialized fitting must be used to prevent rapid electrochemical corrosion between the two dissimilar metals?

Dielectric union

Standard threaded steel coupling

Compression reducer bushing

Schedule 40 PVC slip coupling

Cevabı ve açıklamayı göster

Cevap: Dielectric union

Cevap

Dielectric union

A dielectric union is specifically engineered with an insulating rubber washer and plastic sleeve to isolate copper from galvanized steel, preventing galvanic corrosion in plumbing water supply systems.

Adım Adım Çözüm

Identify the piping materials involved in the connection

Copper and galvanized steel are two dissimilar metals with different electrical potentials.

Direct contact between copper and steel in the presence of an electrolyte such as water creates a galvanic cell, rapidly corroding the more active metal (steel).

Select the appropriate fitting that prevents electrochemical reaction

A dielectric union provides mechanical coupling while incorporating a non-conductive plastic bushing and elastomer washer.

The non-conductive barrier breaks electrical conductivity between the metals, stopping galvanic corrosion.

Anahtar Kavram

Galvanic corrosion prevention in dissimilar metal piping systems

Tahmini Süre:1m 0s

Soru 2379Soru →

An aircraft's emergency pneumatic blow-down bottle contains nitrogen gas at an absolute pressure of $3000 \text{ psi}$ with an internal volume of $200 \text{ in}^3$ . During an emergency landing gear extension, a valve opens and the gas expands into the actuator lines and cylinders, increasing the total volume occupied by the gas to $600 \text{ in}^3$ . Assuming the temperature remains constant during this rapid expansion, what is the new absolute pressure in the system?

1500 \text{ psi}

1000 \text{ psi}

4500 \text{ psi}

9000 \text{ psi}

Cevabı ve açıklamayı göster

Cevap: $1000 \text{ psi}$

Cevap

The new absolute pressure in the system is

1000 \text{ psi}

According to Boyle's Law, when the temperature of a gas is held constant, its pressure and volume are inversely proportional. The gas expanded from an initial volume of

200 \text{ in}^3

to a total final volume of

600 \text{ in}^3

. Because the volume increased by a factor of 3 (

600 / 200 = 3

), the pressure must decrease by a factor of 3. Dividing the initial

3000 \text{ psi}

by 3 results in

1000 \text{ psi}

Adım Adım Çözüm

Identify the appropriate gas law for a scenario with changing pressure and volume at a constant temperature.

Boyle's Law applies, which is expressed as

P_1 \times V_1 = P_2 \times V_2

Boyle's Law dictates that the pressure of a fixed mass of gas is inversely proportional to its volume, provided the temperature remains constant.

Identify the known initial and final variables from the problem statement.

Initial pressure (

P_1

) =

3000 \text{ psi}

, Initial volume (

V_1

) =

200 \text{ in}^3

, and Final volume (

V_2

) =

600 \text{ in}^3

These are the critical parameters needed to solve for the unknown final pressure (

P_2

Substitute the known values into Boyle's Law and solve for the final pressure (

P_2

3000 \times 200 = P_2 \times 600 \rightarrow 600000 = P_2 \times 600 \rightarrow P_2 = 1000 \text{ psi}

Isolating

P_2

algebraically provides the exact pressure after the gas has fully expanded into the larger volume.

Anahtar Kavram

Boyle's Law (Inverse relationship between pressure and volume)

Soru 2380Soru →

A mechanical centrifugal clutch connects a small engine to a drive shaft. As the engine's rotational speed increases, internal weighted shoes slide outward against spring tension until they press firmly against the outer drum, engaging the drive. According to the principles of circular motion, which of the following best explains the physical cause of the shoes moving outward?

The inertia of the shoes causes them to naturally tend toward a straight-line path, and at higher speeds, the springs fail to provide enough inward centripetal force to keep them at a small radius.

An outward centripetal force is generated by the engine's rotation, which actively overcomes the springs and pushes the weighted shoes away from the center.

The turning shaft generates an equal and opposite reaction force that acts outward on the shoes, driving them into the drum.

The high velocity of the spinning shoes creates a high static pressure zone at the center of the clutch, pushing the shoes outward.

Cevabı ve açıklamayı göster

Cevap: The inertia of the shoes causes them to naturally tend toward a straight-line path, and at higher speeds, the springs fail to provide enough inward centripetal force to keep them at a small radius.

Cevap

The inertia of the shoes causes them to naturally tend toward a straight-line path, and at higher speeds, the springs fail to provide enough inward centripetal force to keep them at a small radius.

By Newton's First Law, the rotating shoes have mass and velocity, meaning they naturally tend to travel in a straight, tangential path (inertia). To stay in a tight circular path around the shaft, they require a continuous inward pull, known as centripetal force, which is provided by the springs. As the engine speeds up, the inward force required to maintain that small radius increases significantly. When that required force exceeds the tension the springs can provide, the shoes travel outward along their inertial path until the outer drum stops them.

Adım Adım Çözüm

Identify the forces acting on the rotating shoes.

The only actual radial force applied to the shoes is the tension from the springs, which pulls them inward toward the center shaft.

Understanding the free-body diagram prevents the assumption of fictional outward forces.

Apply Newton's First Law (Inertia) to the moving shoes.

Because the shoes have mass and velocity, they want to travel in a straight, tangential line due to inertia.

Circular motion requires a constant inward force to continuously pull the object out of its natural straight-line path.

Evaluate the relationship between rotational speed and required force.

As speed increases, a much larger inward force (

F = mv^2/r

) is required to keep the shoes in a tight circle. When the speed exceeds what the spring tension can counteract, the shoes follow their inertial path outward until they hit the drum.

This explains the mechanical engagement of the clutch without inventing an outward pushing force.

Anahtar Kavram

Inertia and Centripetal Force

ÖncekiSayfa 119 / 261Sonraki

Tüm alıştırma soruları

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Alternatif Yöntem

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm