Tüm alıştırma soruları

Soru 3001Soru →

Astronomical events look drastically different depending on the observer's location in space. Suppose an astronaut is stationed on the near side of the Moon, continuously facing Earth. At the exact moment that observers on Earth are witnessing a total lunar eclipse, which of the following phenomena does the astronaut observe in the lunar sky?

A total solar eclipse where Earth completely blocks the Sun, with Earth's atmosphere appearing as a glowing red ring.

A total lunar eclipse on Earth, because the Moon's umbral shadow is passing directly across Earth's surface.

A brightly illuminated 'full Earth' phase, because the Moon is positioned directly between Earth and the Sun.

A period of complete darkness as the Sun's shadow is cast entirely over both Earth and the Moon.

Cevabı ve açıklamayı göster

Cevap: A total solar eclipse where Earth completely blocks the Sun, with Earth's atmosphere appearing as a glowing red ring.

Cevap

A total solar eclipse where Earth completely blocks the Sun, with Earth's atmosphere appearing as a glowing red ring.

During a total lunar eclipse, Earth is positioned exactly between the Sun and the Moon. From the perspective of an observer standing on the Moon, Earth passes directly in front of the Sun, blocking its light. Because Earth has an atmosphere, long-wavelength red light from the Sun bends (refracts) around the edges of Earth. Therefore, the lunar observer would see a total solar eclipse characterized by a dark Earth surrounded by a brilliant red ring. This red light is precisely what gives the eclipsed Moon its reddish color as seen from Earth.

Adım Adım Çözüm

1

Determine the alignment of celestial bodies during a total lunar eclipse on Earth.

The alignment is Sun, then Earth, then the Moon in a relatively straight line.

A lunar eclipse occurs when Earth passes directly between the Sun and the Moon, casting its shadow onto the lunar surface.

2

Shift the frame of reference to the astronaut on the near side of the Moon.

Looking toward the inner solar system, the astronaut sees Earth positioned directly in front of the Sun.

Because Earth is between the Sun and the Moon, looking back from the Moon places Earth in the direct line of sight to the Sun.

3

Deduce the visual consequence of this alignment from the Moon.

Earth completely obscures the Sun's disk, creating a total solar eclipse for the lunar observer.

Earth's angular size from the Moon is much larger than the Sun's angular size, allowing it to block the solar disk easily.

4

Account for Earth's atmosphere in the visual phenomena.

Sunlight refracts through Earth's atmosphere, creating a reddish ring around the dark silhouette of Earth.

This refracted red light is exactly what illuminates the Moon during a lunar eclipse (causing the 'blood moon' effect). The astronaut sees the source of this light as a brilliant ring around Earth.

Anahtar Kavram

Spatial reasoning of eclipses and relative celestial alignments

Alternatif Yöntem

Instead of visualizing the alignment step-by-step, you can deduce the answer by asking: 'Why does the Moon look red from Earth during a lunar eclipse?' The light illuminating the Moon must be coming from Earth's atmosphere. Therefore, if you are on the Moon looking back at Earth, you would see that red light glowing around Earth's edges while the Sun is blocked directly behind it.

Tahmini Süre:1m 30s

Soru 3002Soru →

During a total lunar eclipse, the Moon travels through the shadows cast into space by Earth. In what chronological sequence does an observer witness the stages of a total lunar eclipse from start to finish?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct chronological order of stages during a total lunar eclipse is: penumbral entry, umbral ingress (partial eclipse), totality, and umbral egress.

As the Moon orbits Earth from west to east, it encounters Earth's shadow zones in a fixed geometric order. It first enters the wider, outer shadow region called the penumbra, producing slight dimming. Continued orbital motion brings the Moon into contact with the dense inner cone called the umbra, marking the start of the partial phase. When the Moon is entirely immersed within the umbra, it reaches totality, taking on a reddish color from sunlight refracted by Earth's atmosphere. Finally, the Moon begins exiting the umbra during egress, concluding the sequence.

Adım Adım Çözüm

1

Identify the geometry of Earth's shadow structure in space.

Earth projects two concentric shadow zones: an outer, wider region of partial shadow (penumbra) and a central, darker cone of complete shadow (umbra).

Because the Moon approaches Earth's shadow from the outside, it must always traverse the outer penumbra before reaching the umbra.

2

Track the progression of the Moon through the shadow zones.

The Moon first dims subtly in the penumbra, then contacts the umbra where a dark curved silhouette appears, and eventually becomes fully engulfed in totality.

The Moon's continuous orbital motion carries it sequentially through the entrance of the shadow, into maximum immersion, and then out the other side.

3

Determine the concluding stage as the Moon exits the primary shadow.

The leading edge of the Moon emerges from the dark umbra back into the penumbra, restoring direct illumination.

Totality ends when the Moon breaks out of the central umbra during egress.

Anahtar Kavram

Shadow zone geometry (penumbra vs. umbra) and chronological progression of a total lunar eclipse.

Tahmini Süre:1m 0s

Soru 3003Soru →

In mechanical systems, energy exists in various forms and transitions through work and power. Match each physical scenario on the left with its corresponding energy classification or power characteristic on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The compressed spring matches with elastic potential energy stored through mechanical deformation; the cruising aircraft matches with simultaneous gravitational potential and kinetic energy; the friction brake pads match with the dissipation of kinetic energy into thermal energy; and the electric hoist lifting rate matches with a mechanical power delivery of 2 kilowatts.

Each scenario correctly illustrates a fundamental principle of work, energy, and power: deformation stores elastic potential energy; elevated motion embodies simultaneous kinetic and gravitational potential energy; frictional braking converts kinetic energy to heat; and a work rate of 2,000 joules per second represents 2,000 watts (2 kW) of power.

Adım Adım Çözüm

1

Analyze the energy state of the compressed spring.

Identified as elastic potential energy stored by mechanical strain.

Potential energy is stored energy resulting from position or configuration, such as a compressed or stretched spring.

2

Analyze the mechanical state of the cruising aircraft.

Contains both gravitational potential energy (

mgh

) and kinetic energy (

\frac{1}{2}mv^2

).

The aircraft is elevated above ground level and simultaneously moving at a high velocity.

3

Analyze the energy transformation occurring during vehicle braking.

Conversion of mechanical kinetic energy into thermal energy via friction.

Non-conservative frictional forces do negative work on the wheel, dissipating motion into heat.

4

Calculate the power output of the electric hoist performing

2,000\text{ J}

of work per second.

P = \frac{2000\text{ J}}{1\text{ s}} = 2000\text{ W} = 2\text{ kW}

.

Power is the time rate at which work is performed or energy is converted (

1\text{ W} = 1\text{ J/s}

).

Anahtar Kavram

Classification of energy forms (kinetic, gravitational potential, elastic potential), energy dissipation via friction, and the calculation of power as the rate of doing work.

Tahmini Süre:1m 0s

Soru 3004Soru →

Match each geological concept related to Earth's history with its correct definition.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Law of Superposition matches the principle that undisturbed lower sedimentary layers are older than upper layers; Index Fossil matches the remains of a widespread organism that lived during a short geologic span; Radiometric Dating matches the method of finding absolute age through radioactive isotope decay.

Each geological term is paired with its core scientific principle: the Law of Superposition establishes relative layer sequence, index fossils establish biostratigraphic correlation across a specific era, and radiometric decay calculations yield numerical ages.

Adım Adım Çözüm

1

Identify the relative dating principle governing sedimentary layering

The Law of Superposition states that deeper undisturbed layers were deposited before the layers above them.

Sediments deposit horizontally under gravity over time.

2

Identify the tool used to date and correlate strata across distant regions

An Index Fossil provides a distinct biostratigraphic marker due to its wide distribution and short evolutionary lifespan.

Distinct time boundaries allow rock layers in different locations containing the same index fossil to be matched in age.

3

Identify the absolute dating method based on nuclear physics

Radiometric Dating uses fixed radioactive half-lives to determine exact rock ages in years.

Unstable isotopes decay at predictable, constant rates.

Anahtar Kavram

Geological dating methods and principles of relative and absolute time

Tahmini Süre:45s

Soru 3005Soru →

An electric motor performs $4{}500\text{ J}$ of mechanical work in $15\text{ seconds}$ . What is the power output of the motor, in watts?

Cevabı ve açıklamayı göster

Cevap: 300

Cevap

The power output of the motor is

300\text{ W}

.

Power is calculated by dividing work by time (

P = \frac{W}{t}

). Dividing

4{}500\text{ J}

by

15\text{ s}

yields

300\text{ W}

.

Adım Adım Çözüm

1

Identify the relationship between power, work, and time.

P = \frac{W}{t}

Power is defined scientifically as the rate of doing work or transferring energy per unit time.

2

Substitute the given work (

4{}500\text{ J}

) and time (

15\text{ s}

) into the power equation.

P = \frac{4{}500\text{ J}}{15\text{ s}} = 300\text{ W}

Dividing total work in joules by elapsed time in seconds yields the power in watts (

1\text{ W} = 1\text{ J/s}

).

Anahtar Kavram

Power is the rate at which work is performed over time (

P = \frac{W}{t}

).

Tahmini Süre:45s

Soru 3006Soru →

An industrial pump performs $72,000\text{ J}$ of work to circulate coolant through a cooling system in $2\text{ minutes}$ . What is the average power output of the pump?

36,000\text{ W}

600\text{ W}

144,000\text{ W}

72,000\text{ W}

Cevabı ve açıklamayı göster

Cevap: $600\text{ W}$

Cevap

600\text{ W}

Power is defined as the rate at which work is done (

P = \frac{W}{t}

). The standard unit of power, the watt (

\text{W}

), equals one joule per second (

\text{J/s}

). Converting

2\text{ minutes}

gives

120\text{ seconds}

. Dividing

72,000\text{ J}

by

120\text{ s}

gives an average power output of

600\text{ W}

.

Adım Adım Çözüm

1

Convert the elapsed time from minutes into the standard SI unit of seconds

2\text{ minutes} \times 60\text{ seconds/minute} = 120\text{ seconds}

The watt is defined as one joule per second, requiring time to be in seconds.

2

Apply the power formula

P = \frac{W}{t}

by dividing total work by time

P = \frac{72,000\text{ J}}{120\text{ s}} = 600\text{ W}

Power measures the rate at which work is performed over time.

Anahtar Kavram

Power as the Rate of Doing Work (

P = \frac{W}{t}

)

Tahmini Süre:1m 0s

Soru 3007Soru →

Fill in the blank with the correct integer coefficient needed to balance the chemical equation.

Aşağıdaki boşlukları doldurun

In the complete combustion of methane, one molecule of methane reacts with oxygen to form carbon dioxide and water:

\text{CH}_4 + 2\text{O}_2 \rightarrow \text{CO}_2 +

\text{H}_2\text{O}

Cevabı ve açıklamayı göster

Cevap

2

According to the law of conservation of mass, the total number of atoms for each element must be equal before and after the reaction. The reactant side contains 1 carbon atom, 4 hydrogen atoms, and 4 oxygen atoms. On the product side,

\text{CO}_2

contains 1 carbon atom and 2 oxygen atoms. Placing a coefficient of 2 in front of

\text{H}_2\text{O}

provides the remaining 4 hydrogen atoms and 2 oxygen atoms, fully balancing the equation.

Adım Adım Çözüm

1

Count the number of atoms of each element on the reactant side.

Reactants have 1 carbon atom, 4 hydrogen atoms (from

\text{CH}_4

), and 4 oxygen atoms (from

2\text{O}_2

).

The law of conservation of mass requires the number of atoms of each element to be identical on both sides of a balanced chemical equation.

2

Count the atoms present in the products and determine the coefficient needed for

\text{H}_2\text{O}

.

One molecule of

\text{CO}_2

contains 1 carbon atom and 2 oxygen atoms. To balance the 4 hydrogen atoms and remaining 2 oxygen atoms, 2 molecules of

\text{H}_2\text{O}

are required.

A coefficient of 2 provides

2 \times 2 = 4

hydrogen atoms and

2 \times 1 = 2

oxygen atoms, giving a total of 4 oxygen atoms on the product side.

Anahtar Kavram

Balancing chemical equations using conservation of mass

Tahmini Süre:45s

Soru 3008Soru →

An industrial catapult uses a compressed mechanical spring that stores $1{}600\text{ J}$ of elastic potential energy. Upon release, all of this stored energy is converted entirely into kinetic energy to propel an $8\text{ kg}$ projectile horizontally across a frictionless launch track. What is the velocity of the projectile immediately after launch?

10\text{ m/s}

20\text{ m/s}

200\text{ m/s}

400\text{ m/s}

Cevabı ve açıklamayı göster

Cevap: $20\text{ m/s}$

Cevap

20\text{ m/s}

According to the principle of conservation of mechanical energy, the

1{}600\text{ J}

of stored elastic potential energy is completely converted into kinetic energy (

KE = 1{}600\text{ J}

). Applying the kinetic energy formula

KE = \frac{1}{2}mv^2

with

m = 8\text{ kg}

gives

1{}600 = \frac{1}{2}(8)v^2 = 4v^2

. Solving for velocity gives

v^2 = 400

, and taking the square root yields

v = 20\text{ m/s}

.

Adım Adım Çözüm

1

Apply the law of conservation of mechanical energy to equate potential and kinetic energy.

KE = PE_{\text{elastic}} = 1{}600\text{ J}

Since the launch track is frictionless and energy is fully converted, initial potential energy equals final kinetic energy.

2

Substitute the known mass and kinetic energy into the kinetic energy equation.

1{}600 = \frac{1}{2} (8\text{ kg}) v^2

The standard formula for kinetic energy is

KE = \frac{1}{2}mv^2

.

3

Simplify the equation to solve for

v^2

.

4v^2 = 1{}600 \implies v^2 = 400\text{ m}^2/\text{s}^2

Dividing both sides by 4 isolates the squared velocity term.

4

Take the square root of both sides to determine velocity.

v = \sqrt{400} = 20\text{ m/s}

The final velocity is the positive square root of

v^2

.

Anahtar Kavram

Conservation of Mechanical Energy and Kinetic Energy Calculation

Alternatif Yöntem

Express velocity algebraically first:

v = \sqrt{\frac{2E}{m}} = \sqrt{\frac{2 \times 1{}600}{8}} = \sqrt{\frac{3{}200}{8}} = \sqrt{400} = 20\text{ m/s}

.

Tahmini Süre:1m 0s

Soru 3009Soru →

During periods of severe drought, terrestrial plants must conserve moisture while still acquiring gases needed for photosynthetic reactions. Which specialized epidermal cells regulate transpiration and gas exchange by altering their shape to open and close leaf pores?

Centrioles

Mitochondria

Guard cells

Epithelial cells

Cevabı ve açıklamayı göster

Cevap: Guard cells

Cevap

The specialized epidermal cells that regulate transpiration and gas exchange by opening and closing leaf pores are guard cells.

Guard cells are specialized kidney-shaped cells located in the leaf epidermis that flank each stomatal opening. When the plant is well-hydrated, guard cells fill with water, become turgid, and bow outward to open the pore for gas intake. Under drought conditions, the cells lose water and deflate, sealing the pore to prevent desiccation.

Adım Adım Çözüm

1

Identify the primary mechanism of gas exchange and transpiration in plant leaves.

Leaves contain microscopic pores called stomata that permit the intake of carbon dioxide and the release of oxygen and water vapor.

Understanding how gases enter and exit the leaf establishes the anatomical focus of the question.

2

Determine which specialized cells control the opening and closing of these pores.

Paired guard cells flank each stoma and regulate its aperture through changes in internal water pressure.

When guard cells gain water, they swell and curve outward to open the pore; when water is scarce, they lose turgidity and close the pore to conserve moisture.

Anahtar Kavram

Stomatal regulation of gas exchange and transpiration by guard cells

Tahmini Süre:1m 0s

Soru 3010Soru →

Match each geological dating method or paleontological principle on the left with its corresponding diagnostic scientific application on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Carbon-14 Radiometric Dating pairs with calculating absolute numerical ages of recent organic materials via isotope decay; Index Fossil Biostratigraphy pairs with correlating relative ages of separated strata using widespread, short-lived organisms; Law of Cross-Cutting Relationships pairs with establishing that an intrusion or fault is younger than the strata it cuts; Permineralization pairs with preserving cellular detail by precipitating minerals into pore spaces.

Each geological and paleontological method is accurately paired with its definitive scientific mechanism: radiocarbon dating provides numerical ages for recent biological matter; index fossils calibrate strata across regions due to their narrow temporal and broad spatial occurrence; cross-cutting establishes that cutting structures are younger than host rocks; and permineralization preserves cellular structures via mineral saturation in voids.

Adım Adım Çözüm

1

Differentiate absolute radiometric dating methods from relative stratigraphic dating principles.

Carbon-14 dating is identified as the only isotopic method testing radioactive decay in organic carbon remnants up to 50,000 years old.

Radiometric dating produces numerical chronologies, whereas stratigraphic laws yield sequence-based relative dates.

2

Analyze relative dating principles and biostratigraphic index criteria.

Index fossils correlate distant strata based on brief evolutionary lifespans and wide distributions, while cross-cutting relationships dictate that cutting intrusions/faults postdate the disrupted rock layers.

Stratigraphic interpretation requires distinguishing between biological correlation markers and structural deformation rules.

3

Distinguish between fossilization modes based on cellular preservation mechanics.

Permineralization specifically describes mineral precipitation inside internal pore spaces rather than complete carbonization or simple mold/cast formation.

Accurate paleontology classification requires identifying how microscopic structures are preserved in sedimentary matrices.

Anahtar Kavram

Absolute versus relative geological dating techniques, stratigraphic principles, and fossil preservation mechanisms.

Tahmini Süre:1m 30s

Soru 3011Soru →

A technician performs $750\text{ J}$ of mechanical work while pushing a piece of machinery across a level workshop floor over a distance of $15\text{ meters}$ . Assuming the force is applied parallel to the direction of motion, what is the magnitude of the horizontal force applied, in newtons?

Cevabı ve açıklamayı göster

Cevap: 50

Cevap

The magnitude of the applied horizontal force is

50\text{ N}

.

Mechanical work is defined as

W = F \times d

when force and displacement are in the same direction. Rearranging to solve for force gives

F = \frac{W}{d} = \frac{750\text{ J}}{15\text{ m}} = 50\text{ N}

.

Adım Adım Çözüm

1

State the governing formula relating work, force, and displacement

W = F \times d

Work is defined as force multiplied by displacement in the direction of the force.

2

Rearrange the equation to isolate the unknown force variable (

F

)

F = \frac{W}{d}

Dividing both sides of the work formula by displacement yields force.

3

Substitute the given numerical quantities (

W = 750\text{ J}

,

d = 15\text{ m}

) and compute

F = \frac{750}{15} = 50\text{ N}

Carrying out the arithmetic yields the magnitude of the required force in newtons.

Anahtar Kavram

Work is the product of the magnitude of displacement and the component of force in the direction of displacement (

W = Fd

).

Tahmini Süre:1m 0s

Soru 3012Soru →

Place the following major divisions of Earth's geologic history in chronological order, from the earliest (oldest) to the most recent.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

Precambrian Time, Paleozoic Era, Mesozoic Era, Cenozoic Era

The correct chronological sequence from oldest to most recent is Precambrian Time (~4.6 billion to 541 million years ago), followed by the Paleozoic Era (541 to 252 million years ago), the Mesozoic Era (252 to 66 million years ago), and finally the Cenozoic Era (66 million years ago to present).

Adım Adım Çözüm

1

Identify the earliest geologic timeframe

Precambrian Time is the oldest division, representing the first 4 billion years of Earth's history.

It spans from Earth's formation (~4.6 billion years ago) until the emergence of abundant shelly fossils (~541 million years ago).

2

Identify the ancient life era that followed the Precambrian

Paleozoic Era comes second (541 to 252 million years ago).

The name translates to 'ancient life,' characterized by the rise of early marine invertebrates, fish, and primitive land plants and animals.

3

Identify the middle life era

Mesozoic Era comes third (252 to 66 million years ago).

The name translates to 'middle life,' famously dominated by dinosaurs until a mass extinction event ended it.

4

Identify the most recent era

Cenozoic Era is the fourth and final division (66 million years ago to the present).

The name translates to 'recent life,' marked by the rise and dominance of mammals and modern flowering plants.

Anahtar Kavram

Geologic Time Scale Chronology

Tahmini Süre:45s

Soru 3013Soru →

A model electric car accelerates uniformly along a straight track from rest to a speed of $12\text{ m/s}$ in $4\text{ seconds}$ . What is the magnitude of the car's acceleration in meters per second squared ( $\text{m/s}^2$ )?

Cevabı ve açıklamayı göster

Cevap: 3

Cevap

The magnitude of the acceleration is

3\text{ m/s}^2

.

Acceleration is defined as the change in velocity divided by the time elapsed (

a = \frac{\Delta v}{t}

). Since the car accelerates from

0\text{ m/s}

to

12\text{ m/s}

in

4\text{ s}

, the acceleration is

\frac{12 - 0}{4} = 3\text{ m/s}^2

.

Adım Adım Çözüm

1

Identify the given physical quantities from the problem statement

Initial velocity

v_i = 0\text{ m/s}

, final velocity

v_f = 12\text{ m/s}

, time

t = 4\text{ s}

Establishing known variables is necessary before selecting the appropriate kinematic relationship.

2

Apply the definition of constant linear acceleration:

a = \frac{\Delta v}{\Delta t} = \frac{v_f - v_i}{t}

Formula set up as

a = \frac{12\text{ m/s} - 0\text{ m/s}}{4\text{ s}}

Acceleration represents the rate of change of velocity with respect to time.

3

Perform the division to compute acceleration

a = 3\text{ m/s}^2

Dividing

12

by

4

yields the constant acceleration magnitude.

Anahtar Kavram

Uniform Linear Acceleration

Alternatif Yöntem

Using the kinematic equation

v_f = v_i + at

, substitute

12 = 0 + a(4)

, which simplifies directly to

4a = 12

, yielding

a = 3\text{ m/s}^2

.

Tahmini Süre:45s

Soru 3014Soru →

Because blood in the peripheral venous system is under significantly lower pressure than in the arterial system, returning blood from the lower limbs must overcome the force of gravity. Which anatomical feature is present in these veins to ensure unidirectional blood flow toward the heart?

Thick layers of elastic connective tissue that recoil during diastole

One-way endothelial valves that close when pressure drops above them

Precapillary circular sphincters that regulate microvascular resistance

A thick, highly muscular tunica media that continuously generates high pressure

Cevabı ve açıklamayı göster

Cevap: One-way endothelial valves that close when pressure drops above them

Cevap

One-way endothelial valves that close when pressure drops above them prevent retrograde blood flow in low-pressure systemic veins.

Venous return from the extremities operates under low pressure and relies on the skeletal muscle pump and one-way valves. These semilunar folds of endothelium permit forward movement during muscle contraction and seal shut during relaxation to prevent backward pooling of blood.

Adım Adım Çözüm

1

Analyze the physiological challenge described in the stem.

Blood in the lower limb veins travels back to the heart under low hydrostatic pressure and must resist backward movement caused by gravity.

Identifying the hemodynamic state distinguishes venous adaptations from high-pressure arterial adaptations.

2

Evaluate the specialized anatomical structures of peripheral veins.

Veins contain bicuspid pocket valves constructed from folds of the tunica intima (endothelium) that allow blood to move only toward the heart.

Skeletal muscle contractions compress the vein to propel blood forward, while the closure of these valves prevents backflow between contractions.

Anahtar Kavram

Venous Valve Function and Hemodynamics

Tahmini Süre:1m 0s

Soru 3015Soru →

During a laboratory experiment, a student mixes an aqueous solution of sodium carbonate ( $\text{Na}_2\text{CO}_3$ ) with an aqueous solution of calcium chloride ( $\text{CaCl}_2$ ). A solid white precipitate of calcium carbonate ( $\text{CaCO}_3$ ) immediately forms and settles at the bottom, while sodium chloride ( $\text{NaCl}$ ) remains dissolved. Which of the following statements best explains why this process is classified as a chemical reaction rather than a physical change?

The liquid solution underwent a physical phase change where dissolved particles froze into solid crystals due to temperature loss.

The substances formed a simple mechanical mixture in which both original compounds retain their identical chemical bonds.

Chemical bonds were broken and reformed to produce a new substance with different chemical properties from the original reactants.

New atoms of calcium and carbon were generated during the reaction to create the additional mass observed in the solid precipitate.

Cevabı ve açıklamayı göster

Cevap: Chemical bonds were broken and reformed to produce a new substance with different chemical properties from the original reactants.

Cevap

Chemical bonds were broken and reformed to produce a new substance with different chemical properties from the original reactants.

A chemical reaction occurs when bonds within reactant molecules break and new bonds form to create one or more chemically distinct substances. The formation of solid calcium carbonate precipitate from aqueous sodium carbonate and calcium chloride demonstrates the synthesis of a new compound with unique solubility and chemical properties.

Adım Adım Çözüm

1

Analyze the starting reactants and resulting products in the reaction.

Reactants are soluble

\text{Na}_2\text{CO}_3

and

\text{CaCl}_2

; products are solid

\text{CaCO}_3

precipitate and dissolved

\text{NaCl}

.

Identifying the initial and final chemical species confirms whether new substances were produced.

2

Distinguish between chemical transformations and physical changes.

The formation of a solid precipitate from two clear liquids via double displacement indicates bonds broke and reformed to yield a new insoluble compound.

A physical change alters form or state without changing chemical identity, whereas this reaction alters chemical identity and molecular structure.

3

Apply the Law of Conservation of Mass to verify atom balance.

The balanced equation is

\text{Na}_2\text{CO}_3\text{(aq)} + \text{CaCl}_2\text{(aq)} \rightarrow \text{CaCO}_3\text{(s)} + 2\text{NaCl}\text{(aq)}

, showing atom conservation rather than atom creation.

All atoms present in the products originate from the reactants; no atoms are generated or destroyed.

Anahtar Kavram

Chemical change involves breaking and forming chemical bonds to produce new substances, distinguished from physical phase changes and governed by the Law of Conservation of Mass.

Tahmini Süre:1m 0s

Soru 3016Soru →

The human urinary system consists of specialized anatomical structures working together to eliminate metabolic waste and maintain fluid homeostasis. Match each urinary organ to its primary physiological function.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Kidney matches with filtering blood to remove nitrogenous waste; Ureter matches with transporting urine from the renal pelvis to the storage organ; Urinary Bladder matches with providing temporary expandable storage; Urethra matches with conveying urine out of the body.

Each organ in the urinary tract has a distinct anatomical role in the pathway of waste excretion: the kidneys produce urine through blood filtration, the bilateral ureters conduct urine away from the renal pelvis, the urinary bladder acts as the temporary reservoir, and the urethra serves as the exit canal to the exterior.

Adım Adım Çözüm

1

Identify the primary filtration organ of the urinary system

The kidney filters waste from circulating blood to generate urine.

Nephrons within the renal cortex and medulla perform filtration, reabsorption, and secretion.

2

Trace the sequential conduits that carry, store, and excrete urine

Ureters transport urine to the bladder, the bladder stores it, and the urethra conducts it out of the body.

Ureters lead from kidneys to the bladder, while the urethra leads from the bladder to the external environment.

Anahtar Kavram

Structure and function of the human excretory/urinary system organs

Soru 3017Soru →

Infectious illnesses can spread rapidly in close community settings, making proper pathogen classification essential for effective treatment. What fundamental biological characteristic distinguishes viral pathogens from bacterial pathogens?

Viruses reproduce independently through binary fission in extracellular fluids.

Viruses synthesize their own metabolic energy using specialized internal organelles.

Viruses lack cellular machinery and require a living host cell to replicate.

Viruses possess thick peptidoglycan cell walls that actively neutralize antimicrobial drugs.

Cevabı ve açıklamayı göster

Cevap: Viruses lack cellular machinery and require a living host cell to replicate.

Cevap

Viruses lack cellular machinery and require a living host cell to replicate.

Viruses are acellular infectious particles consisting of genetic material (DNA or RNA) enclosed in a protein capsid. They do not possess the cellular organelles, enzymes, or structures necessary for independent metabolism and replication, requiring them to infect a living host cell to multiply.

Adım Adım Çözüm

1

Analyze the structural classification of bacteria versus viruses.

Bacteria are living, cellular prokaryotes with their own metabolic processes, while viruses are non-living, acellular entities containing nucleic acids enclosed within a protein capsid.

Establishing the biological classification clarifies the cellular differences between the two pathogen classes.

2

Determine the reproductive requirements of viral pathogens.

Because viruses lack ribosomes, enzymes for nutrient metabolism, and organelles, they cannot perform independent replication and must invade a host cell to produce progeny.

This obligate intracellular replication mechanism is the primary defining characteristic of viruses.

Anahtar Kavram

Structural and reproductive distinctions between acellular viruses and cellular bacteria

Soru 3018Soru →

An automated conveyor belt pulls a heavy cargo container across a level $14\text{-meter}$ warehouse floor in $7\text{ seconds}$ by exerting a constant horizontal force of $250\text{ N}$ . What is the power output delivered by the conveyor belt to the container?

3{}500\text{ W}

125\text{ W}

500\text{ W}

24{}500\text{ W}

Cevabı ve açıklamayı göster

Cevap: $500\text{ W}$

Cevap

The power output delivered by the conveyor belt is

500\text{ W}

.

Power is defined as work done divided by time (

P = \frac{W}{t}

). The conveyor belt performs

3{}500\text{ J}

of work (

250\text{ N} \times 14\text{ m}

). Over an interval of

7\text{ seconds}

, the power delivered is

\frac{3{}500\text{ J}}{7\text{ s}} = 500\text{ W}

.

Adım Adım Çözüm

1

Calculate the mechanical work performed using

W = F \times d

.

W = 250\text{ N} \times 14\text{ m} = 3{}500\text{ J}

Work is the product of the applied force and the displacement in the direction of the force.

2

Calculate the power output by dividing work by time using

P = \frac{W}{t}

.

P = \frac{3{}500\text{ J}}{7\text{ s}} = 500\text{ W}

Power is defined as the time rate at which work is done or energy is transferred.

Anahtar Kavram

Mechanical Work and Power

Tahmini Süre:1m 0s

Soru 3019Soru →

A bowling ball rolls down a lane toward the pins. Which form of energy does the rolling ball primarily possess as a result of its motion?

Potential energy

Thermal energy

Kinetic energy

Chemical energy

Cevabı ve açıklamayı göster

Cevap: Kinetic energy

Cevap

Kinetic energy

Kinetic energy is defined as the energy an object possesses by virtue of being in motion. Because the bowling ball is rolling down the lane, its mechanical energy is predominantly kinetic energy.

Adım Adım Çözüm

1

Identify the physical state of the object described in the question.

The bowling ball is actively rolling along the lane, which means it is in motion.

Determining whether an object is stationary (storing energy) or moving is the key to identifying the form of mechanical energy.

2

Apply the definition of mechanical energy categories to the moving object.

Energy associated directly with the motion of an object is defined as kinetic energy (

KE = \frac{1}{2}mv^2

).

Potential energy accounts for stored energy of position, whereas kinetic energy specifically measures energy of motion.

Anahtar Kavram

Kinetic Energy and Motion

Tahmini Süre:30s

Soru 3020Soru →

Match each physical scenario on the left with its correct energy transformation or work-power principle on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The electric crane matches delivering 9,800 W steady power with constant kinetic energy; the descending elevator matches tension doing negative work to remove potential energy; the pneumatic piston matches stored potential energy doing positive work to become kinetic energy; and the skidding vehicle matches friction doing negative work to convert kinetic energy into thermal energy.

Each match correctly links mechanical principles: the crane requires steady power calculated via

P = Fv = (mg)v = 9{}800\text{ W}

; lowering a load under tension performs negative work because force opposes displacement; expanding gas does positive work converting potential energy to kinetic energy; and sliding friction performs negative work converting kinetic energy into thermal energy.

Adım Adım Çözüm

1

Analyze the electric crane lifting at constant speed to determine force and power.

Force

F = mg = 500\text{ kg} \times 9.8\text{ m/s}^2 = 4{}900\text{ N}

, Power

P = Fv = 4{}900\text{ N} \times 2\text{ m/s} = 9{}800\text{ W}

. Because velocity is constant,

\Delta KE = 0

.

When velocity is constant, acceleration is zero, so applied upward force equals gravitational force, and instantaneous power equals force multiplied by velocity.

2

Evaluate the work done by tension on the descending elevator.

Upward cable tension is opposite to downward displacement (

180^\circ

), so work is negative (

W < 0

). Potential energy decreases while kinetic energy is unchanged.

Forces directed opposite to displacement extract mechanical energy by doing negative work.

3

Analyze the expanding pneumatic piston accelerating the projectile.

Internal potential energy exerts a force along the direction of motion, doing net positive work (

W > 0

) that becomes kinetic energy.

According to the work-energy theorem, positive net work performed on a mass increases its kinetic energy.

4

Determine the energy transition for the braking vehicle.

Friction acts opposite to displacement, doing negative work to dissipate initial kinetic energy into heat.

Non-conservative frictional forces convert macroscopic kinetic energy into microscopic thermal energy.

Anahtar Kavram

Work-energy theorem, rate of energy transfer (power as P = Fv), sign conventions of mechanical work, and conservative versus dissipative energy transformations.

Tahmini Süre:1m 30s

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Alternatif Yöntem

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Alternatif Yöntem

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Alternatif Yöntem

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar