Tüm alıştırma soruları

5215 soru

Tüm türler5,215 Çoktan seçmeli2,665 Çoklu seçim6 Doğru / Yanlış260 Sayısal512 Eşleştirme930 Sıralama396 Boşluk doldurma397 Kısa cevap49

Soru 601Soru →

Electric utility companies transmit electrical power across regional grids using high-voltage alternating current (AC) rather than direct current (DC). What is the primary technical advantage of using AC for long-distance power distribution?

AC experiences zero electrical resistance when flowing through transmission conductors.

AC electrons travel significantly faster through conductors than DC electrons, minimizing transit delay.

AC voltage can be easily stepped up to high voltages using transformers to minimize transmission power loss.

AC maintains a continuous single polarity that eliminates high-voltage arcing between lines.

Cevabı ve açıklamayı göster

Cevap: AC voltage can be easily stepped up to high voltages using transformers to minimize transmission power loss.

Cevap

AC voltage can be easily stepped up to high voltages using transformers to minimize transmission power loss.

The primary advantage of alternating current (AC) in power distribution is its compatibility with electromagnetic transformers. By stepping voltage up to very high levels for long-distance transmission, the line current is substantially reduced, which minimizes

I^2 R

heat losses along transmission lines. Step-down transformers then reduce the voltage to safe, usable levels at homes and businesses.

Adım Adım Çözüm

Analyze the relationship between transmission voltage, current, and line power loss.

Power lost as heat in transmission conductors is given by

P_{\text{loss}} = I^2 R

. Stepping up transmission voltage reduces current

I

for a given power level, which drastically reduces power loss across the line resistance

R

High voltage is necessary to minimize resistive losses over long transmission distances.

Evaluate why AC is uniquely suited for voltage stepping compared to steady DC.

Transformers rely on electromagnetic induction driven by a continuously changing magnetic field, which requires alternating current (AC). Steady DC cannot induce a continuous secondary voltage in standard transformers.

AC operates transformers with high efficiency, allowing simple conversion between generation, transmission, and household voltage levels.

Anahtar Kavram

Alternating current (AC) produces fluctuating magnetic fields that allow transformers to efficiently step voltage up for low-loss transmission and down for end-user distribution.

Tahmini Süre:45s

Soru 602Soru →

An off-grid weather monitoring station stores electrical energy in a $24\text{ V}$ direct current (DC) battery bank but must operate a $120\text{ V}$ alternating current (AC) transmitter. Which component is required to power the transmitter from the battery bank, and how does it manipulate the electrical current?

A rectifier, which converts continuous unidirectional current into an oscillating bidirectional waveform

A step-up transformer, which increases steady direct current voltage by maintaining a static magnetic field

An inverter, which converts unidirectional direct current into alternating current that periodically reverses polarity

A forward-biased diode bridge, which switches electron flow from conventional positive flow to negative flow

Cevabı ve açıklamayı göster

Cevap: An inverter, which converts unidirectional direct current into alternating current that periodically reverses polarity

Cevap

An inverter, which converts unidirectional direct current into alternating current that periodically reverses polarity

Batteries store and supply direct current (DC), in which electrons flow in only one direction with constant polarity. An inverter uses electronic switching circuitry (such as transistors or MOSFETs) to transform this unidirectional current into alternating current (AC), where the voltage and electron flow periodically alternate and reverse direction to match the requirements of AC equipment.

Adım Adım Çözüm

Identify the power source and the load power requirements

The energy source is a

24\text{ V}

battery bank providing steady direct current (DC), while the load requires

120\text{ V}

alternating current (AC).

Determining the input waveform (unidirectional DC) and output waveform (alternating bidirectional AC) establishes the necessary power conversion process.

Evaluate the function of conversion and transformation devices

Transformers require alternating current to induce voltage and cannot operate on steady DC; rectifiers convert AC to DC; inverters convert DC to AC.

An inverter electronically switches and modulates DC to generate an alternating voltage and current waveform that periodically reverses direction.

Select the component that performs DC-to-AC conversion

An inverter changes the unidirectional DC into the required AC waveform.

The transmitter requires an AC waveform with reversing polarity, which only an inverter can synthesize from a DC storage bank.

Anahtar Kavram

Direct Current (DC) flows continuously in a single direction, whereas Alternating Current (AC) periodically reverses direction and polarity. Converting DC to AC requires an inverter, whereas converting AC to DC requires a rectifier.

Tahmini Süre:45s

Soru 603Soru →

A logistics manager is tracking the number of supply crates shipped each week. Over the first four weeks of a five-week period, the facility shipped $13$ , $27$ , $18$ , and $26$ crates. How many crates must be shipped in the fifth week to achieve an average (mean) of $24$ crates per week for the entire five-week period?

12

21

22

36

Cevabı ve açıklamayı göster

Cevap: $36$

Cevap

The facility must ship

36

crates in the fifth week.

To find a missing value when the mean is known, first determine the total sum required. An average of 24 over 5 weeks means the total crates shipped must equal 120 (24 × 5). Since 84 crates were shipped in the first four weeks (13 + 27 + 18 + 26), 36 more crates are needed in the final week (120 - 84) to meet the goal.

Adım Adım Çözüm

Calculate the total number of crates needed for all

5

weeks.

24 \times 5 = 120

The mean formula is (total sum) ÷ (number of values). Therefore, the required total sum is the target mean multiplied by the total number of weeks.

Calculate the sum of the crates shipped in the first

4

weeks.

13 + 27 + 18 + 26 = 84

This determines how many crates have already been accounted for in the total.

Subtract the sum of the first

4

weeks from the target total to find the missing value.

120 - 84 = 36

The difference between the required total and the current total is the value needed for the final week.

Anahtar Kavram

Solving for a Missing Data Point Given the Mean

Soru 604Soru →

An NPN bipolar junction transistor circuit is configured with voltage-divider biasing from a single $15\text{ V}$ DC power supply. The voltage divider consists of an upper resistor $R_1 = 20\text{ k}\Omega$ connected to the positive supply and a lower resistor $R_2 = 10\text{ k}\Omega$ connected to ground. The emitter terminal is connected to ground through an emitter resistor $R_E = 1\text{ k}\Omega$ . Assuming a standard silicon base-to-emitter forward voltage drop of $V_{BE} = 0.7\text{ V}$ and negligible base current, what is the approximate DC emitter current ( $I_E$ ) flowing through the transistor?

5.0\text{ mA}

4.3\text{ mA}

5.7\text{ mA}

10.0\text{ mA}

Cevabı ve açıklamayı göster

Cevap: $4.3\text{ mA}$

Cevap

4.3\text{ mA}

In an NPN voltage-divider biased circuit, the base voltage relative to ground is determined by the divider ratio:

V_B = 15\text{ V} \times (10\text{ k}\Omega / 30\text{ k}\Omega) = 5.0\text{ V}

. Because the base-emitter junction is forward-biased, it drops

0.7\text{ V}

, establishing an emitter voltage of

V_E = 5.0\text{ V} - 0.7\text{ V} = 4.3\text{ V}

. Dividing this emitter voltage by the

1\text{ k}\Omega

emitter resistor yields an emitter current of

4.3\text{ mA}

Adım Adım Çözüm

Calculate the DC voltage at the base terminal (

V_B

) using the voltage divider rule

V_B = 15\text{ V} \times \frac{10\text{ k}\Omega}{20\text{ k}\Omega + 10\text{ k}\Omega} = 15\text{ V} \times \frac{1}{3} = 5.0\text{ V}

The base voltage is established by the ratio of the lower resistor to the total resistance across the supply when base current loading is negligible.

Determine the DC voltage at the emitter terminal (

V_E

) by accounting for the base-emitter forward voltage drop

V_E = V_B - V_{BE} = 5.0\text{ V} - 0.7\text{ V} = 4.3\text{ V}

In an active NPN transistor, the base-emitter junction is forward-biased, dropping approximately 0.7 V from base to emitter.

Apply Ohm's law across the emitter resistor (

R_E

) to calculate the emitter current (

I_E

)

I_E = \frac{V_E}{R_E} = \frac{4.3\text{ V}}{1\text{ k}\Omega} = 4.3\text{ mA}

The emitter current equals the voltage developed across the emitter resistor divided by its resistance.

Anahtar Kavram

Transistor Voltage-Divider DC Biasing and Emitter Current Calculation

Tahmini Süre:1m 30s

Soru 605Soru →

A technician needs to modify a parallel-plate capacitor to increase its capacitance for an audio filtering application. Which design change will accomplish this?

Inserting a solid iron core between the plates to concentrate magnetic flux

Increasing the surface area of the conductive plates while decreasing the separation distance between them

Replacing the insulating dielectric spacer with a conductive aluminum strip

Widening the plate separation gap to permit steady direct current to flow through the component

Cevabı ve açıklamayı göster

Cevap: Increasing the surface area of the conductive plates while decreasing the separation distance between them

Cevap

Increasing the surface area of the conductive plates while decreasing the separation distance between them

Capacitance (

C

) of a parallel-plate capacitor is given by the formula

C = \frac{\varepsilon A}{d}

, where

\varepsilon

represents the permittivity of the dielectric,

A

is the surface area of the plates, and

d

is the distance between them. Increasing the plate surface area and decreasing the separation distance between the plates directly increases the capacitance.

Adım Adım Çözüm

Identify the formula governing the capacitance of a parallel-plate capacitor.

The capacitance formula is

C = \frac{\varepsilon A}{d}

, where

C

is capacitance,

\varepsilon

is the permittivity of the dielectric material,

A

is the plate surface area, and

d

is the plate separation distance.

Capacitance is determined by the physical geometry of the plates and the insulating properties of the dielectric.

Determine which physical modifications increase the value of

C

Increasing the plate area (

A

) and decreasing the separation distance (

d

) both increase the total capacitance.

A larger plate area accommodates more electric charge at a given voltage, while a smaller gap strengthens the electrostatic field between the plates.

Anahtar Kavram

Physical factors affecting parallel-plate capacitance

Tahmini Süre:1m 0s

Soru 606Soru →

Match each series circuit electrical property or condition on the left with its correct fundamental rule on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Circuit Current matches 'Remains identical and continuous through every connected component'; Total Resistance matches 'Equals the direct sum of all individual component resistances'; Source Voltage matches 'Divides across components such that individual drops sum to the source total'; Open Component Fault matches 'Completely interrupts electron flow throughout the entire single loop'.

Each relationship reflects the core principles of series circuit analysis: a single pathway guarantees uniform current throughout, sequential resistive elements add directly to total opposition, the sum of individual voltage drops balances the source voltage, and any break disrupts the entire closed conductive loop.

Adım Adım Çözüm

Analyze current flow in a single-loop circuit

Identify that charge has only one path to follow, making current uniform throughout all series components.

Conservation of charge dictates current cannot accumulate or branch without alternative parallel paths.

Determine total resistance formula for series elements

Establish that each resistor adds directly to the total opposition (

R_T = R_1 + R_2 + \dots

Electrons must push through each resistive element sequentially.

Analyze voltage division across series loads

Confirm that source voltage is distributed proportionally across loads, summing to

V_T

Energy provided by the power supply equals total energy dropped across the circuit loads.

Evaluate the effect of a break or open circuit

Conclude that an open element halts all current in the entire circuit.

Breaking the single loop prevents complete continuity back to the power source.

Anahtar Kavram

Fundamental Series Circuit Laws (Current Uniformity, Resistance Additivity, Voltage Division, and Loop Continuity)

Tahmini Süre:45s

Soru 607Soru →

Match each type of capacitor to its primary characteristic or typical circuit application.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Electrolytic capacitor matches polarized component offering high capacitance values for power supply filtering; Ceramic disc capacitor matches non-polarized component with low capacitance for high-frequency bypass circuits; Variable capacitor matches adjustable capacitance device for radio frequency tuning circuits.

Each capacitor type is tailored to specific circuit needs: electrolytic capacitors provide high capacitance values and require proper polarity orientation for power supply smoothing; ceramic disc capacitors are non-polarized and offer low capacitance values optimal for RF bypass; variable capacitors provide adjustable capacitance to tune receivers to target frequencies.

Adım Adım Çözüm

Identify the construction and primary application of electrolytic capacitors.

Electrolytic capacitors use a thin chemical oxide layer as a dielectric, providing high capacitance in a compact size, but they must be connected with correct polarity (+/-) and are widely used to smooth ripple voltage in DC power supplies.

Polarity sensitivity and large capacitance are the defining operational traits of electrolytic capacitors.

Identify the construction and primary application of ceramic disc capacitors.

Ceramic disc capacitors have a solid ceramic dielectric, are non-polarized, and feature low capacitance ratings, making them stable and low-loss at high frequencies for bypass and filter tasks.

Non-polarity and low parasitic inductance suit ceramic capacitors for high-frequency AC bypassing.

Identify the construction and primary application of variable capacitors.

Variable capacitors allow the user to change plate overlap area or spacing, changing capacitance to tune resonant tank circuits to specific radio broadcast frequencies.

Adjustable capacitance directly shifts the resonant frequency in RF tuning circuits.

Anahtar Kavram

Capacitor construction types, polarity requirements, and their respective circuit applications.

Tahmini Süre:45s

Soru 608Soru →

An electronics technician is analyzing an AC circuit that consists of a capacitor connected directly across an alternating current signal generator. If the generator's operating frequency is doubled while the source voltage remains constant, which of the following statements correctly describes the effect on the capacitive reactance and the circuit current?

The capacitive reactance doubles, which causes the circuit current to decrease by half.

The capacitive reactance decreases by half, which causes the circuit current to double.

The capacitive reactance remains constant, which results in no change to the circuit current.

The capacitive reactance drops to zero, because the dielectric begins conducting continuous current at higher frequencies.

Cevabı ve açıklamayı göster

Cevap: The capacitive reactance decreases by half, which causes the circuit current to double.

Cevap

The capacitive reactance decreases by half, which causes the circuit current to double.

Capacitive reactance is calculated using

X_C = \frac{1}{2\pi f C}

, which shows that reactance is inversely proportional to the AC frequency. When the frequency is doubled, the opposition to AC current is halved. According to Ohm's law for AC circuits (

I = \frac{V}{X_C}

), reducing the reactance by half while holding the voltage constant doubles the current flowing through the circuit.

Adım Adım Çözüm

Identify the formula for capacitive reactance

X_C = \frac{1}{2\pi f C}

Capacitive reactance (

X_C

) measures the opposition a capacitor presents to alternating current and depends inversely on frequency (

f

) and capacitance (

C

Determine the change in capacitive reactance when frequency doubles

X_{C,\text{new}} = \frac{1}{2\pi (2f) C} = \frac{1}{2} X_C

Because frequency is in the denominator, doubling

f

halves the total capacitive reactance.

Apply Ohm's law for AC circuits to find the change in current

I_{\text{new}} = \frac{V}{X_{C,\text{new}}} = \frac{V}{\frac{1}{2}X_C} = 2 \times \left(\frac{V}{X_C}\right) = 2I

With constant source voltage

V

, cutting the opposition to current (

X_C

) by half causes the circuit current to double.

Anahtar Kavram

Capacitive Reactance and AC Frequency Relationship

Tahmini Süre:1m 0s

Soru 609Soru →

A technician needs to measure the electromotive force (EMF) across an operating direct-current (DC) circuit component. Which of the following describes the correct meter configuration and the property being measured?

Connect the meter in series with the component to measure the rate of charge flow in amperes

Connect the meter in series with the component to measure the electrical pressure in volts

Connect the meter in parallel with the component to measure the potential difference in volts

Connect the meter in parallel with the component to measure the current draw in amperes

Cevabı ve açıklamayı göster

Cevap: Connect the meter in parallel with the component to measure the potential difference in volts

Cevap

Connect the meter in parallel with the component to measure the potential difference in volts

Electromotive force (EMF) is the measure of electrical pressure or potential difference between two points, quantified in units of volts. Because voltage is a relative measurement across two nodes, the meter must be connected in parallel across the component under test.

Adım Adım Çözüm

Identify the electrical property defined by electromotive force (EMF)

EMF represents electrical pressure or potential difference, which is quantified in volts (

V

Electromotive force is the energy per unit charge that drives electrons between two points in a circuit.

Determine the proper meter placement for measuring potential difference

The voltmeter must be connected in parallel (across) the component.

Potential difference is measured between two distinct points; connecting in parallel allows the high-impedance meter to sample the voltage drop without disrupting circuit current.

Anahtar Kavram

Electromotive force (EMF) is the potential difference or electrical pressure across two points, measured in volts using a voltmeter connected in parallel.

Tahmini Süre:45s

Soru 610Soru →

In electronics, bipolar junction transistors (BJTs) rely on three specialized terminals to control and route current. Match each BJT terminal to its primary functional role in a circuit.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Base matches with serving as the thin control layer that regulates carrier flow; Emitter matches with introducing and supplying majority charge carriers; Collector matches with gathering charge carriers to deliver output current.

Each terminal of a BJT has a designated task: the emitter supplies majority carriers, the base controls the rate of carrier flow via a small control signal, and the collector gathers these carriers to route current to the load circuit.

Adım Adım Çözüm

Identify the primary role of the emitter terminal

The emitter is heavily doped to emit (inject) electrons or holes into the transistor body.

This establishes the supply of charge carriers needed for current flow.

Identify the primary role of the base terminal

The base controls the current flow through a small biasing voltage and current.

Because it is narrow and lightly doped, small variations at the base gate the bulk of current flowing across the device.

Identify the primary role of the collector terminal

The collector collects charge carriers swept across the base-collector junction.

It handles the bulk of power dissipation and passes the resulting amplified or switched current to the load.

Anahtar Kavram

Bipolar Junction Transistor (BJT) terminal roles and charge carrier dynamics

Tahmini Süre:45s

Soru 611Soru →

Match each voltage and electromotive force concept on the left with its correct definition or description on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Electromotive Force (EMF) pairs with the total electrical pressure supplied by an energy source; Potential Difference pairs with the difference in electrical potential energy across a circuit component; Volt pairs with the standard unit defined as one joule per coulomb; and Voltmeter pairs with the measuring instrument connected in parallel across a load.

Electromotive Force (EMF) provides the driving electrical pressure from a source; Potential Difference (Voltage Drop) is the change in electrical energy across a component; the Volt is the standard unit representing one joule per coulomb; and a Voltmeter is the high-resistance meter connected in parallel to measure electrical potential.

Adım Adım Çözüm

Identify the source of electrical pressure in a circuit

Electromotive force (EMF) represents the energy provided by a source (such as a battery or generator) to establish electron flow.

EMF originates at the power source and represents the maximum potential available to do work.

Distinguish component potential difference from source EMF

Potential difference (voltage drop) describes the energy consumed per unit charge between two points across a load.

As electrons flow through resistance, potential energy decreases across each element.

Match the fundamental unit and measurement tool for electrical potential

The volt is the SI unit (

1\text{ V} = 1\text{ J/C}

), and the voltmeter is the high-impedance tool connected in parallel to measure voltage.

Correct identification of units and test instruments is essential for electrical analysis and troubleshooting.

Anahtar Kavram

Voltage, Electromotive Force, and Measurement Fundamentals

Tahmini Süre:45s

Soru 612Soru →

An electronics technician is analyzing solid-state switching and amplification circuits. Match each transistor operating region to its corresponding junction biasing condition and functional circuit behavior.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

BJT Cutoff matches both junctions reverse-biased (open switch); BJT Saturation matches both junctions forward-biased (closed switch); BJT Forward-Active matches forward-biased base-emitter and reverse-biased base-collector (linear amplification); JFET Ohmic Region matches unpinched channel at low drain voltage (voltage-controlled resistor).

Transistor states are governed by internal PN junction bias levels and gate field controls: Cutoff has both BJT junctions reverse-biased (acting as an open switch), Saturation has both BJT junctions forward-biased (acting as a closed switch), Forward-Active utilizes a forward-biased base-emitter and reverse-biased base-collector junction for linear amplification, and the JFET Ohmic region operates prior to pinch-off as a voltage-controlled variable resistor.

Adım Adım Çözüm

Determine the junction bias conditions for digital BJT switching states.

Cutoff requires reverse-biasing both the base-emitter and base-collector junctions (open switch), while saturation requires forward-biasing both junctions (closed switch).

Biasing conditions control whether carrier flow is completely blocked or fully saturated across the semiconductor junctions.

Determine the junction bias conditions for BJT linear amplification.

Forward-active operation requires the base-emitter junction to be forward-biased (

V_{BE} \approx 0.7\text{ V}

) and the base-collector junction to be reverse-biased.

This asymmetric bias configuration allows a small base current to modulate a substantially larger collector current proportionally.

Analyze the operational characteristics of a field-effect transistor below pinch-off.

In the ohmic (triode) region, the drain voltage is lower than the pinch-off threshold, so the channel acts as an electric-field-controlled resistor.

The gate-to-source voltage alters depletion layer width, varying the cross-sectional conductive area and resistance of the channel.

Anahtar Kavram

Transistor Operating States, Biasing Rules, and Terminal Relationships

Tahmini Süre:1m 30s

Soru 613Soru →

Match each transistor terminal lead with its primary operational function in solid-state circuits.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

BJT Base pairs with 'Supplies the small input control current that regulates the main current flow'; BJT Emitter pairs with 'Injects the primary charge carriers into the middle semiconductor region'; BJT Collector pairs with 'Gathers majority charge carriers to route output current through the load'; FET Gate pairs with 'Applies an electrostatic field to modulate channel conductivity without drawing steady DC input current'.

In bipolar junction transistors, the base regulates the conduction pathway through a small input current, the emitter emits/injects majority charge carriers, and the collector gathers those carriers to deliver current to the load. In field-effect transistors, the gate acts as an electrostatic control terminal that modulates channel conduction via voltage without drawing significant steady-state current.

Adım Adım Çözüm

Determine the control and injection roles of BJT leads

The base acts as the control terminal requiring current, and the emitter supplies the charge carriers.

Bipolar junction transistors are current-driven devices where a small base current forward-biases the base-emitter junction to release carriers from the emitter.

Determine the output gathering role of the BJT collector

The collector collects carriers that successfully pass through the thin base layer.

The collector is physically designed with a larger area and reverse bias to capture carriers and handle heat dissipation from load current.

Determine the voltage-control role of the FET gate lead

The gate regulates current through an electrostatic field without drawing steady current.

Field-effect transistors have extremely high input impedance at the gate, relying on voltage rather than current to modulate channel resistance.

Anahtar Kavram

Transistor Terminal Functions and Operating Mechanisms

Tahmini Süre:1m 0s

Soru 614Soru →

Match each electrical component or power source to its corresponding operational characteristic regarding alternating current (AC) and direct current (DC).

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Automotive battery pairs with steady direct current flowing in one constant direction; Residential wall outlet pairs with supplying alternating current that periodically reverses direction; Rectifier pairs with converting AC into DC; Inverter pairs with converting DC into AC.

An automotive battery supplies direct current (DC) flowing in a single fixed direction, while a residential wall outlet provides alternating current (AC) that constantly reverses direction. For power conversion, a rectifier changes AC into DC, and an inverter changes DC into AC.

Adım Adım Çözüm

Classify the output type of the power sources.

An automotive battery produces a constant direct current (DC) flowing continuously from negative to positive terminals. A residential wall outlet delivers power that oscillates in polarity and reverses direction, which is alternating current (AC).

Electrochemical cells maintain constant terminal polarity, whereas utility power grids distribute AC power generated by rotating alternators.

Differentiate between the two electrical conversion devices.

A rectifier changes alternating current (AC) into direct current (DC), while an inverter changes direct current (DC) into alternating current (AC).

Rectifiers are used to power DC electronics from AC grid mains, whereas inverters allow standard AC appliances to operate from DC battery banks.

Anahtar Kavram

Distinction between AC and DC sources and the functional roles of rectifiers and inverters

Tahmini Süre:45s

Soru 615Soru →

A logistics officer is analyzing the fuel consumption of five transport trucks. The data for the first four trucks is $45$ , $52$ , $48$ , and $55$ gallons. The fuel data for the fifth truck was lost, but the officer remembers that it consumed more fuel than any of the other four trucks. If the mean fuel consumption of all five trucks is exactly equal to their median, how many gallons of fuel did the fifth truck consume?

50

52

60

75

Cevabı ve açıklamayı göster

Cevap: $60$

Cevap

The fifth truck consumed

60

gallons of fuel.

Since the fifth truck consumed more fuel than the other four, the sorted order of the five values is

45

48

52

55

, and

x

. The median of these five values is the third value, which is

52

. The problem states that the mean equals the median, so the equation is

(45 + 48 + 52 + 55 + x) / 5 = 52

. Simplifying the numerator gives

(200 + x) / 5 = 52

. Multiplying both sides by

5

results in

200 + x = 260

. Subtracting

200

from both sides gives

x = 60

Adım Adım Çözüm

Determine the median of the five values.

The median is

52

Since the fifth truck consumed the most fuel, let its consumption be

x

. The sorted order of the five trucks is

45

48

52

55

x

. The median of five ordered values is the third value.

Set up an equation for the mean.

Mean =

(200 + x) / 5

The mean is the sum of all five values (

45 + 48 + 52 + 55 + x = 200 + x

) divided by the total number of trucks (

5

Equate the mean and the median to solve for

x

(200 + x) / 5 = 52

The problem states that the mean fuel consumption is exactly equal to the median.

Solve the algebraic equation.

x = 60

Multiplying both sides by

5

gives

200 + x = 260

. Subtracting

200

from both sides gives

x = 60

Anahtar Kavram

Solving for an unknown data point by equating the mean and the median of an ordered dataset.

Soru 616Soru →

In electrical and electronic systems, direct current (DC) and alternating current (AC) interact with specific devices for power generation, conversion, and voltage transformation. Match each electrical component or device on the left with its primary operational function or characteristic on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Electrochemical battery cell matches with generates a continuous, unidirectional flow of electric charge; Standard electromagnetic transformer matches with steps voltage levels up or down using a changing magnetic field; Silicon bridge rectifier matches with converts alternating current into pulsating direct current; Solid-state electronic inverter matches with converts direct current into alternating current.

Each component is accurately paired with its fundamental relationship to AC or DC: batteries supply pure DC, transformers strictly require AC induction, rectifiers convert AC into DC, and inverters synthesize AC from DC.

Adım Adım Çözüm

Identify the source behavior of the electrochemical battery cell

Matched with producing continuous unidirectional current flow (DC).

Chemical reactions inside a battery maintain constant polarity at the terminals, forcing electrons to move in one direction.

Determine the operating principle of the electromagnetic transformer

Matched with stepping voltage up or down via a changing magnetic field.

Electromagnetic induction requires a constantly changing current, which is provided exclusively by alternating current (AC) rather than steady DC.

Distinguish between conversion devices (rectifier versus inverter)

Rectifier converts AC to DC; Inverter converts DC to AC.

Rectifiers use diodes to permit one-way conduction from an AC source, whereas inverters use electronic switching to create an alternating waveform from a DC supply.

Anahtar Kavram

Direct Current (DC) maintains unidirectional electron flow, while Alternating Current (AC) reverses direction periodically. Specific components are required to generate, transform, or convert between these two electrical modes.

Tahmini Süre:1m 0s

Soru 617Soru →

For a silicon PNP bipolar junction transistor to operate correctly in the active region as a linear amplifier, the DC biasing circuit must ensure that the collector terminal is maintained at a higher positive voltage relative to the emitter terminal.

Doğru

Yanlış

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False

The statement is false because in a PNP transistor, the emitter must be at a higher positive potential than the collector to ensure current flows correctly (from emitter to collector) and the junctions are properly biased for the active region.

Adım Adım Çözüm

Identify the specific transistor type and its intended operating state.

The device is a PNP bipolar junction transistor operating in the active region (as a linear amplifier).

Different transistor types (NPN vs. PNP) require completely opposite voltage polarities for the same operating state.

Recall the structural composition of a PNP transistor.

A PNP transistor consists of a P-type emitter, an N-type base, and a P-type collector.

Understanding the semiconductor materials (P or N) dictates how junctions must be biased.

Determine the required junction biasing for the active region.

For any BJT to act as a linear amplifier (active region), its emitter-base junction must be forward-biased, and its collector-base junction must be reverse-biased.

This specific biasing arrangement allows a small base current to control a larger collector current without entering saturation or cutoff.

Apply the biasing rules to the PNP terminal voltages.

To forward-bias the P-N emitter-base junction, the P-type emitter must be more positive than the N-type base. To reverse-bias the P-N collector-base junction, the P-type collector must be more negative than the N-type base.

Forward biasing requires connecting positive potential to P-type material; reverse biasing requires connecting negative potential to P-type material.

Evaluate the statement based on the deduced voltage potentials.

The emitter is the most positive terminal in a properly biased PNP amplifier circuit. Therefore, the collector is at a lower voltage relative to the emitter, making the original statement false.

The statement claims the collector is at a higher positive voltage, which incorrectly describes an NPN transistor's biasing.

Anahtar Kavram

Transistor Biasing and Polarity Configuration

Tahmini Süre:1m 30s

Soru 618Soru →

In electrical systems, direct current (DC) and alternating current (AC) exhibit distinct behaviors across chemical, capacitive, magnetic, and electromechanical applications. Match each electrical component or application on the left with its correct operational characteristic regarding AC or DC on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Secondary battery charging matches unidirectional chemical restoration; Iron-core transformer matches alternating flux mutual induction; Capacitor in steady DC matches open-circuit behavior at zero frequency; Split-ring commutator matches mechanical rectification of AC to DC.

Each component is correctly matched to its fundamental AC or DC operating mechanism: battery charging requires unidirectional DC electron flow for chemical storage, transformers depend on AC-induced time-varying magnetic flux, capacitors block steady DC at

0\text{ Hz}

, and commutators mechanically rectify internally induced AC into DC.

Adım Adım Çözüm

Analyze the chemical requirement of battery charging

Battery charging requires continuous direct current (DC) so that ions travel consistently toward their designated electrodes without reversing every half-cycle.

AC would alternate between charging and discharging every cycle, resulting in zero net chemical energy storage.

Analyze transformer operational physics

Transformers require alternating current (AC) to produce a continuously changing magnetic field (

\Delta\Phi/\Delta t

) across the core to induce an electromotive force in the secondary coil.

Steady DC produces a static magnetic field that cannot induce continuous secondary voltage.

Analyze capacitive reactance under DC conditions

With capacitive reactance

X_C = \frac{1}{2\pi f C}

, a steady DC source has a frequency of

f = 0\text{ Hz}

, yielding infinite reactance (

X_C \rightarrow \infty

) once charged.

Direct current cannot cross the insulating dielectric layer once charge equilibrium is established.

Analyze the electromechanical function of a split-ring commutator

Rotating loops in a magnetic field inherently produce AC; the split rings reverse contact connections at each half-rotation, converting internal AC into pulsating DC.

The commutator serves as a mechanical rectifier.

Anahtar Kavram

Fundamental distinctions in how alternating current (time-varying direction/magnitude) and direct current (unidirectional flow) govern induction, electrochemistry, capacitive opposition, and mechanical waveform rectification.

Tahmini Süre:1m 30s

Soru 619Soru →

A technician is analyzing a power supply smoothing circuit. The circuit contains three capacitors arranged in a specific configuration: Capacitor $C_1$ ( $30 \mu\text{F}$ ) and Capacitor $C_2$ ( $15 \mu\text{F}$ ) are connected in series. This entire series branch is then connected in parallel with Capacitor $C_3$ ( $90 \mu\text{F}$ ). What is the total equivalent capacitance of this capacitor network?

100 \mu\text{F}

30 \mu\text{F}

135 \mu\text{F}

9 \mu\text{F}

Cevabı ve açıklamayı göster

Cevap: $100 \mu\text{F}$

Cevap

The correct equivalent capacitance is

100 \mu\text{F}

To find the total capacitance, first evaluate the series branch. Unlike resistors, capacitors in series use the inverse formula:

C_{12} = (30 \times 15) / (30 + 15) = 10 \mu\text{F}

. This equivalent capacitor is in parallel with

C_3

. Parallel capacitors simply add their values together:

10 \mu\text{F} + 90 \mu\text{F} = 100 \mu\text{F}

Adım Adım Çözüm

Calculate the equivalent capacitance of the series branch containing

C_1

and

C_2

C_{12} = \frac{30 \times 15}{30 + 15} = \frac{450}{45} = 10 \mu\text{F}

Capacitors in series add inversely, which is the exact opposite of resistors. The product-over-sum formula applies to two capacitors in series.

Calculate the total equivalent capacitance by combining the series branch (

C_{12}

) in parallel with

C_3

C_{\text{total}} = 10 + 90 = 100 \mu\text{F}

Capacitors in parallel add directly together, as the effective plate area is increased.

Anahtar Kavram

Calculating equivalent capacitance in mixed series and parallel circuits.

Tahmini Süre:1m 30s

Soru 620Soru →

Match each type of capacitor with its distinctive construction characteristic or typical circuit application.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Electrolytic Capacitor matches with polarized high-capacitance design; Ceramic Disc Capacitor matches with non-polarized high-frequency bypass; Variable (Trimmer) Capacitor matches with mechanically adjustable capacitance for RF tuning; Film (Polyester) Capacitor matches with high stability, low loss, and high insulation resistance.

Each capacitor type is tailored to specific circuit needs based on dielectric properties: electrolytic capacitors deliver high capacitance with strict polarity; ceramic discs provide non-polarized high-frequency bypassing; variable capacitors allow adjustable RF tuning; and film capacitors deliver low loss and high thermal stability.

Adım Adım Çözüm

Identify the polarity and capacitance range requirements of electrolytic capacitors.

Electrolytic capacitors are uniquely polarized and offer high capacitance values suitable for power supply smoothing.

The thin chemical dielectric layer creates high capacitance per volume, but reverse biasing breaks down this layer destructively.

Evaluate the properties of ceramic disc capacitors.

Ceramic capacitors are non-polarized with small capacitance values, ideal for high-frequency decoupling.

Ceramic materials provide low parasitic inductance and withstand fast transient frequencies.

Identify the mechanism and function of variable capacitors.

Variable capacitors permit mechanical rotation of plates to vary capacitance for tuning circuits.

Varying the effective plate overlap area directly shifts the resonant frequency in radio frequency circuits.

Examine the dielectric properties of film capacitors.

Film capacitors provide exceptional stability, low dielectric absorption, and low loss.

Plastic film dielectrics maintain precise electrical characteristics across temperature variations without significant leakage.

Anahtar Kavram

Classification of capacitor types by dielectric construction, polarity constraints, and functional applications in electronic circuits.

Tahmini Süre:1m 0s

ÖncekiSayfa 31 / 261Sonraki

Tüm alıştırma soruları

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram