Tüm alıştırma soruları

Soru 1841Soru →

An automotive engineer installs a thin, highly polished aluminum heat shield between a hot exhaust manifold and the passenger cabin floorboard, intentionally leaving an air gap between the exhaust and the shield. While the air gap significantly reduces heat transfer by conduction, what is the primary function of the shield's highly polished finish?

To reflect electromagnetic thermal energy away from the cabin, minimizing heat transfer by radiation.

To maximize the absorption of thermal energy from the exhaust, preventing it from radiating further.

To disrupt the natural circulation of hot air currents, minimizing heat transfer by convection.

To increase the thermal resistance of the metal barrier, preventing heat transfer by conduction.

Cevabı ve açıklamayı göster

Cevap: To reflect electromagnetic thermal energy away from the cabin, minimizing heat transfer by radiation.

Cevap

To reflect electromagnetic thermal energy away from the cabin, minimizing heat transfer by radiation.

Heat can transfer through three main modes: conduction, convection, and radiation. In this scenario, the air gap addresses conduction, and the physical presence of the shield blocks convective air currents. Thermal radiation, however, travels as electromagnetic waves and can easily cross the air gap. The highly polished finish acts like a mirror for infrared waves, reflecting the radiant heat back toward the exhaust and preventing the shield from absorbing the energy and transferring it to the cabin.

Adım Adım Çözüm

1

Analyze the components of the thermal protection system described in the scenario.

The system consists of an air gap and a physical metal shield with a highly polished surface.

Identifying the purpose of each component helps isolate the function of the polished finish.

2

Evaluate the roles of conduction and convection.

The air gap minimizes conduction, and the physical barrier of the shield blocks convection currents.

This leaves radiation as the primary heat transfer mode that the surface finish must address.

3

Apply the principles of thermal radiation to surface finishes.

Dull, black surfaces absorb and emit radiation efficiently, while shiny, polished surfaces reflect electromagnetic radiation and are poor absorbers.

Understanding how light and infrared waves interact with different materials is required to solve the problem.

4

Determine the specific function of the polished aluminum finish.

The polished surface acts as a mirror for infrared thermal energy, reflecting it away from the passenger cabin.

This directly minimizes heat transfer by radiation.

Anahtar Kavram

Surface properties strongly influence heat transfer by radiation; shiny, polished surfaces are excellent reflectors and poor absorbers of radiant thermal energy.

Soru 1842Soru →

A spacecraft is operating in the pure vacuum of space. Which mechanism is the ONLY way the spacecraft can transfer excess thermal energy away from its external panels?

Conduction

Convection

Radiation

Thermal expansion

Cevabı ve açıklamayı göster

Cevap: Radiation

Cevap

Radiation

The correct answer identifies that electromagnetic waves can travel through a vacuum. Because space lacks a physical medium (like air or water), heat cannot be transferred via contact or fluid circulation, leaving electromagnetic emission as the only possible method.

Adım Adım Çözüm

1

Analyze the environment described in the scenario.

The spacecraft is in the pure vacuum of space, meaning there is no air, gas, or other physical matter surrounding it.

The availability of a physical medium determines which types of heat transfer are possible.

2

Evaluate the physical requirements of conduction and convection.

Conduction requires direct physical contact, and convection requires a circulating fluid or gas.

Because space is a vacuum, neither of these matter-dependent transfer methods can occur.

3

Identify the heat transfer method that works in a vacuum.

Radiation transfers heat via electromagnetic waves, which do not need a medium to travel through.

This makes it the sole mechanism for dissipating heat in space.

Anahtar Kavram

Thermal radiation is the transfer of heat via electromagnetic waves, allowing thermal energy to travel across a vacuum where no physical matter exists.

Soru 1843Soru →

During a manufacturing process, a pneumatic pusher applies a constant net horizontal force of $300 \text{ N}$ to slide a steel component across a frictionless track. If the component accelerates at $15 \text{ m/s}^2$ , what is the mass of the steel component?

20 \text{ kg}

30 \text{ kg}

315 \text{ kg}

4,500 \text{ kg}

Cevabı ve açıklamayı göster

Cevap: $20 \text{ kg}$

Cevap

20 \text{ kg}

According to Newton's Second Law of Motion, the net force on an object is equal to its mass times its acceleration (

F = ma

). To find the mass when both force and acceleration are known, the formula must be rearranged to divide the net force by the acceleration (

m = \frac{F}{a}

). Dividing the given

300 \text{ N}

by

15 \text{ m/s}^2

yields a mass of

20 \text{ kg}

.

Adım Adım Çözüm

1

Identify the given variables provided in the scenario.

Force (

F

) =

300 \text{ N}

, Acceleration (

a

) =

15 \text{ m/s}^2

.

Establishing the known physical quantities is required before selecting and applying the correct formula.

2

State Newton's Second Law of Motion and rearrange it algebraically to solve for mass.

The formula

F = ma

becomes

m = \frac{F}{a}

.

The question asks for the mass of the component, so the standard equation must be isolated for the variable

m

.

3

Substitute the known values into the rearranged equation and calculate the final result.

m = \frac{300}{15} = 20 \text{ kg}

.

Provides the final mass of the steel component based on the applied force and resulting acceleration.

Anahtar Kavram

Newton's Second Law (

F=ma

)

Soru 1844Soru →

A mechanic is servicing a high-speed gearbox and must choose a lubricant. If a heavy, thick grease is used instead of a lightweight oil, the gearbox will require more mechanical power to maintain its high rotational speeds. What is the primary cause of this increased resistance?

The greater viscosity of the thick grease creates higher fluid friction against the moving gears.

The layer of grease increases the total surface area of the gears, which directly multiplies the kinetic friction.

The thick grease adds extra mass to the assembly, and this added weight is what strongly resists the rotational motion.

The thick grease absorbs all reaction forces between the gear teeth, neutralizing the inertia of the system.

Cevabı ve açıklamayı göster

Cevap: The greater viscosity of the thick grease creates higher fluid friction against the moving gears.

Cevap

The greater viscosity of the thick grease creates higher fluid friction against the moving gears.

Thick grease has a high viscosity, meaning it strongly resists flow and deformation. When gears rotate at high speeds through this thick substance, they must continuously shear and displace the grease. This creates substantial fluid friction (drag), which opposes the motion of the gears and requires the system to draw more mechanical power to maintain its speed.

Adım Adım Çözüm

1

Identify the type of resistance introduced when machine parts move through a liquid or semi-solid substance.

The resistance is fluid friction, also known as drag or viscous resistance.

Because the gears are completely coated by a lubricant, they must continuously push the fluid out of the way as they spin.

2

Compare the physical properties of a lightweight oil and a thick grease.

Thick grease has a much higher viscosity than lightweight oil.

Viscosity is the measure of a fluid's internal resistance to flow and deformation.

3

Determine how this viscosity affects high-speed mechanical operation.

Higher viscosity results in greater fluid friction against the fast-moving gears, requiring more energy from the motor to maintain speed.

Moving through a thicker, more resistant substance requires more force than moving through a thinner one.

Anahtar Kavram

Fluid Friction and Viscosity

Soru 1845Soru →

A steel I-beam is supported at both ends and subjected to a heavy downward load in the center of its span. Which of the following statements correctly identifies where the maximum compressive stress occurs, and correctly explains the structural efficiency of the I-beam's profile?

The compressive stress is distributed evenly; however, the open I-shape is fundamentally less rigid against bending than a solid rectangular bar of the exact same weight.

The vertical web experiences the maximum compressive stress; the shape requires a highly brittle material to absorb the downward bending force without fracturing.

The top flange experiences the maximum compressive stress; the shape is efficient because it concentrates material far from the neutral axis where bending stresses peak.

The bottom flange experiences the maximum compressive stress; the shape is efficient because the downward load naturally compresses the lowest part of the span.

Cevabı ve açıklamayı göster

Cevap: The top flange experiences the maximum compressive stress; the shape is efficient because it concentrates material far from the neutral axis where bending stresses peak.

Cevap

The maximum compressive stress occurs in the top flange. The I-beam's profile is efficient because it places the most material (the flanges) far from the neutral axis, exactly where bending stresses are highest.

When a beam supported at both ends bends downward, it forms a curve. The top edge of the curve becomes shorter, meaning it is under compression. The bottom edge becomes longer, meaning it is under tension. The I-beam is highly efficient because it concentrates its material in the top and bottom flanges—exactly where these compressive and tensile stresses are at their maximum—while minimizing material in the center (the neutral axis) where bending stress is nearly zero.

Adım Adım Çözüm

1

Analyze the forces acting on the simply supported beam under a downward center load.

The beam bends into a slight U-shape, causing the top surface to squeeze together and the bottom surface to stretch apart.

To identify which parts of the beam are under tension versus compression during bending.

2

Identify the location of maximum compressive stress.

Since the top surface is being squeezed, the top flange experiences the maximum compressive stress.

To evaluate the options claiming the bottom flange or web takes the maximum compression.

3

Evaluate the structural efficiency of the I-beam profile compared to solid shapes.

The I-shape places the majority of its mass (the flanges) at the top and bottom where the stresses are highest, leaving a thin web in the middle (the neutral axis) where bending stress is nearly zero.

To determine why the I-beam profile is superior to a solid rectangular bar of the same weight.

Anahtar Kavram

Bending Moments and I-Beam Efficiency

Soru 1846Soru →

A heavy-duty pneumatic shock absorber relies on a sealed chamber of air to dampen impacts. Before an impact, the air inside the chamber has an absolute pressure of $90 \text{ psi}$ , occupies a volume of $60 \text{ in}^3$ , and is at a temperature of $300 \text{ K}$ . During a severe impact, the piston rapidly compresses the air volume to $20 \text{ in}^3$ , causing the internal temperature to spike to $400 \text{ K}$ . Assuming no air escapes, what is the new absolute pressure inside the shock absorber?

40 \text{ psi}

120 \text{ psi}

270 \text{ psi}

360 \text{ psi}

Cevabı ve açıklamayı göster

Cevap: $360 \text{ psi}$

Cevap

360 \text{ psi}

The correct answer correctly applies the Combined Gas Law. The volume is reduced to one-third of its original size, which alone would triple the pressure to

270 \text{ psi}

. Simultaneously, the absolute temperature increases by a factor of

4/3

, which further scales the pressure to

270 \times \frac{4}{3} = 360 \text{ psi}

.

Adım Adım Çözüm

1

Identify the initial state (

P_1, V_1, T_1

) and final state (

V_2, T_2

) variables from the problem.

P_1 = 90 \text{ psi}

,

V_1 = 60 \text{ in}^3

,

T_1 = 300 \text{ K}

;

V_2 = 20 \text{ in}^3

,

T_2 = 400 \text{ K}

.

Establishing known parameters is required to use the Combined Gas Law.

2

Set up the Combined Gas Law equation:

\frac{P_1 \times V_1}{T_1} = \frac{P_2 \times V_2}{T_2}

.

\frac{90 \times 60}{300} = \frac{P_2 \times 20}{400}

Since both volume and temperature are changing simultaneously, the combined relationship must be used.

3

Rearrange the formula to isolate the final pressure (

P_2

).

P_2 = P_1 \times \left(\frac{V_1}{V_2}\right) \times \left(\frac{T_2}{T_1}\right)

This setup groups the variables into easy-to-calculate ratios.

4

Substitute the values and calculate the final result.

P_2 = 90 \times \left(\frac{60}{20}\right) \times \left(\frac{400}{300}\right) = 90 \times 3 \times \frac{4}{3} = 360 \text{ psi}

.

Mathematical evaluation yields the final absolute pressure inside the shock absorber.

Anahtar Kavram

Combined Gas Law and Compressibility

Soru 1847Soru →

An automated logistics drone is transporting a sealed supply crate. On Earth, where the gravitational acceleration is considered to be $10 \text{ m/s}^2$ , the crate has a measured weight of $1400 \text{ N}$ . The crate is then delivered to a controlled low-gravity research habitat where the local gravitational acceleration is maintained at $3.5 \text{ m/s}^2$ .

What is the weight of the crate inside the low-gravity habitat in Newtons?

Cevabı ve açıklamayı göster

Cevap: 490

Cevap

490

To find the new weight, first determine the crate's mass, which does not change. Dividing the Earth weight (

1400 \text{ N}

) by Earth's gravity (

10 \text{ m/s}^2

) gives a mass of

140 \text{ kg}

. Then, multiply this invariant mass by the habitat's gravity (

3.5 \text{ m/s}^2

) to find the new weight:

140 \text{ kg} \times 3.5 \text{ m/s}^2 = 490 \text{ N}

.

Adım Adım Çözüm

1

Calculate the mass of the crate on Earth.

m = \frac{1400 \text{ N}}{10 \text{ m/s}^2} = 140 \text{ kg}

Mass is an intrinsic property of the object that remains constant regardless of location.

2

Calculate the weight of the crate in the low-gravity habitat.

W = 140 \text{ kg} \times 3.5 \text{ m/s}^2 = 490 \text{ N}

Weight is the force exerted by gravity on a mass, which changes depending on the local gravitational acceleration.

Anahtar Kavram

Mass is invariant, while weight depends on the local gravitational field.

Soru 1848Soru →

Two workers are carrying an engine block weighing $300$ pounds using a rigid, lightweight $10$ -foot pole that rests on their shoulders. If the engine block is hung exactly $2$ feet away from the first worker and $8$ feet away from the second worker, how much of the weight is the first worker supporting?

240

pounds

150

pounds

60

pounds

300

pounds

Cevabı ve açıklamayı göster

Cevap: $240$ pounds

Cevap

The first worker supports

240

pounds.

In a load distribution system, a support carries a fraction of the total weight that is inversely proportional to its distance from the load. To find the load on the first worker, you can use the second worker's shoulder as a pivot point. The total length of the pole is

10

feet. The downward torque from the engine block is

300 \text{ pounds} \times 8 \text{ feet} = 2400 \text{ ft-lbs}

. The upward torque from the first worker must equal this, so

F_1 \times 10 \text{ feet} = 2400 \text{ ft-lbs}

. Solving this gives

F_1 = 240

pounds. Intuitively, because the weight is much closer to the first worker, they bear the vast majority of the load.

Adım Adım Çözüm

1

Identify the total length of the support and the distances to the load.

Total pole length =

10

feet. Distance from the first worker to the load =

2

feet. Distance from the second worker to the load =

8

feet.

Establishing the lever arm distances is necessary to calculate the torques balancing the system.

2

Set up a torque equilibrium equation using the second worker as the pivot point (fulcrum).

F_1 \times 10 = 300 \times 8

In static equilibrium, the upward torque created by the first worker (

F_1

) must equal the downward torque created by the engine block relative to the second worker.

3

Solve the equation for the force exerted by the first worker (

F_1

).

10F_1 = 2400 \Rightarrow F_1 = 240

pounds.

Isolating the variable gives the exact load supported by the first worker.

Anahtar Kavram

Load Distribution and Equilibrium

Soru 1849Soru →

When a massive steel cargo ship collides with a small wooden fishing boat, the impact force exerted by the cargo ship on the wooden boat is significantly greater in magnitude than the reaction force exerted by the wooden boat on the cargo ship, due to the ship's vastly greater mass and momentum.

Doğru

Yanlış

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is false.

The statement is false because Newton's Third Law mandates that forces between two interacting objects are always exactly equal in magnitude and opposite in direction, irrespective of their differing masses or momentums.

Adım Adım Çözüm

1

Analyze the interacting bodies and the nature of the forces described in the scenario.

The two bodies are a massive cargo ship and a small wooden boat experiencing a collision, which constitutes an interacting force pair.

Identifying the system and the interaction is necessary to apply the correct physical laws.

2

Apply Newton's Third Law to the interaction.

The law states that force pairs between two interacting objects are always equal in magnitude and opposite in direction (

F_{ship} = -F_{boat}

).

This fundamental law dictates how forces operate between any two interacting bodies, regardless of their physical properties.

3

Evaluate the role of mass and momentum mentioned in the statement.

While the ship has significantly greater mass and momentum, these factors determine the resulting acceleration (

a = \frac{F}{m}

) and subsequent damage, not the magnitude of the interacting force pair itself.

It is critical to distinguish between the contact force itself and the effects (acceleration, deformation) of that force.

Anahtar Kavram

Newton's Third Law of Motion (Equal and Opposite Reaction)

Soru 1850Soru →

Four different objects are completely submerged in a tank of fresh water. The mass of each object and the volume of water it displaces are recorded below. Arrange the objects in order of the buoyant force exerted on them by the water, from LEAST buoyant force to GREATEST buoyant force.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from least to greatest buoyant force is: Iron weight, Lead brick, Aluminum gear, Wooden block.

According to Archimedes' principle, the buoyant force acting on an object is equal to the weight of the fluid it displaces. Because all the objects are in the same fresh water, the buoyant force is directly proportional to the displaced volume. By ordering the displaced volumes from smallest to largest (

0.2 \text{ L}

,

0.5 \text{ L}

,

1.0 \text{ L}

,

2.0 \text{ L}

), we accurately order the buoyant forces from least to greatest.

Adım Adım Çözüm

1

Recall the definition of Archimedes' principle.

The buoyant force acting on a submerged object is equal to the weight of the fluid that the object displaces.

This principle establishes that when objects are submerged in the same fluid, the buoyant force depends entirely on the volume of fluid displaced, not the mass of the objects themselves.

2

Extract the relevant data for each object.

Iron =

0.2 \text{ L}

, Lead =

0.5 \text{ L}

, Aluminum =

1.0 \text{ L}

, Wood =

2.0 \text{ L}

.

The mass values provided (

0.5 \text{ kg}

to

3.0 \text{ kg}

) are distractor information and should be ignored for calculating buoyant force.

3

Rank the objects based on their displaced volumes from least to greatest.

Iron (

0.2 \text{ L}

) < Lead (

0.5 \text{ L}

) < Aluminum (

1.0 \text{ L}

) < Wood (

2.0 \text{ L}

).

Since greater displaced volume equals greater buoyant force, this is the final correct order.

Anahtar Kavram

According to Archimedes' Principle, the buoyant force on a submerged object depends only on the density of the fluid and the volume of the fluid displaced, completely independent of the object's mass or weight.

Tahmini Süre:45s

Soru 1851Soru →

Identify the fluid dynamics at work by pairing each mechanical component or structural design with its correct convection mechanism.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The chimney relies on natural convection of gases; the ceiling fan uses forced convection of gases; the solar water heater uses natural convection of liquids; and the centrifugal pump uses forced convection of liquids.

Convection transfers heat through the macroscopic movement of fluids (gases or liquids). This movement can be natural, where heated fluid becomes less dense and rises, or forced, where a mechanical device moves the fluid. The correct pairs perfectly map each mechanical system to its specific fluid state and its specific driving force.

Adım Adım Çözüm

1

Analyze each component to determine if it handles a gas (air or smoke) or a liquid (water or coolant).

The chimney and ceiling fan handle gases. The solar heater and centrifugal pump handle liquids.

Identifying the fluid medium narrows down the possible matches.

2

Determine if the fluid movement is driven by natural density differences (buoyancy) or by a mechanical device (pump or fan).

The chimney and solar heater are passive (natural convection). The ceiling fan and centrifugal pump are motorized (forced convection).

Distinguishing between natural and forced convection isolates the exact operational principle for each component.

3

Pair the components with the corresponding descriptions based on the fluid type and driving mechanism.

Chimney (natural gas) pairs with an upward draft. Ceiling fan (forced gas) pairs with disrupting stratification. Solar heater (natural liquid) pairs with passive liquid circulation. Pump (forced liquid) pairs with circulating liquid coolant.

Each description uniquely matches the state of matter and convection type of one specific component.

Anahtar Kavram

Convection occurs in both gases and liquids and can be driven naturally by density differences (buoyancy) or forced mechanically by fans and pumps.

Soru 1852Soru →

Unlike conduction and convection, thermal radiation can transfer heat energy through a complete vacuum.

Doğru

Yanlış

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True

The statement is accurate. Thermal radiation is the emission of electromagnetic waves from all matter that has a temperature greater than absolute zero. Because electromagnetic waves do not require a physical medium to propagate, radiation is the only form of heat transfer that can occur in a complete vacuum.

Adım Adım Çözüm

1

Identify the physical requirements for conduction and convection.

Both conduction and convection require matter (a physical medium) to transfer heat energy.

Conduction relies on direct contact between vibrating particles, and convection relies on the physical motion of fluids.

2

Determine the physical mechanism for thermal radiation.

Thermal radiation transfers heat via electromagnetic waves.

Electromagnetic waves can travel through empty space because they do not rely on particle interaction.

3

Evaluate the statement based on the identified mechanisms.

The statement is correct; radiation is uniquely capable of transferring heat through a vacuum.

This is the fundamental reason why the Earth is able to receive heat energy from the Sun across the vacuum of outer space.

Anahtar Kavram

Radiation propagates without a medium

Tahmini Süre:30s

Soru 1853Soru →

Match each closed hydraulic system scenario to its calculated unknown value. Assume the fluid is incompressible, there is no friction, and conditions are ideal.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The correct matches are based on applying Pascal's Principle and the conservation of work. Output Force is 250 lbs, Output Area is 15 in², Input Force is 50 lbs, and Output Distance is 1 in.

Each matching pair applies either Pascal's Principle (

P = \frac{F_1}{A_1} = \frac{F_2}{A_2}

) or the conservation of work (

F_1 \cdot d_1 = F_2 \cdot d_2

) to solve for the missing variable in the hydraulic system.

Adım Adım Çözüm

1

Calculate the Output Force for the first scenario.

250 lbs

Using Pascal's Principle (

F_1/A_1 = F_2/A_2

), the system pressure is 50 lbs / 2 in² = 25 psi. The output force is 25 psi * 10 in² = 250 lbs.

2

Calculate the Output Area for the second scenario.

15 in²

The system pressure is 30 lbs / 3 in² = 10 psi. Rearranging the formula for area (

A = F/P

), the output area is 150 lbs / 10 psi = 15 in².

3

Calculate the Input Force for the third scenario.

50 lbs

System pressure is determined by the output side: 100 lbs / 20 in² = 5 psi. The required input force is 5 psi * 10 in² = 50 lbs.

4

Calculate the Output Distance for the fourth scenario.

1 in

By conservation of work (

F_1 \times d_1 = F_2 \times d_2

), the input work is 40 lbs * 5 in = 200 in-lbs. Thus, the output distance is 200 in-lbs / 200 lbs = 1 in.

Anahtar Kavram

Pascal's Principle states that pressure applied to an enclosed fluid is transmitted undiminished. The work done on the input piston equals the work done by the output piston.

Soru 1854Soru →

Evaluate the gauge hydrostatic pressure exerted at the specific points in the four situations described below. Rank them in order from the HIGHEST hydrostatic pressure to the LOWEST hydrostatic pressure.

Assume standard gravity ( $g$ ) applies equally to all scenarios.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct ranking from highest to lowest pressure is: the narrow pipe with oil, the scuba diver in the lake, the submersible in the ocean, and finally the municipal water reservoir.

The correct sequence is found by calculating the relative pressure factor (density multiplied by depth) for each situation. The narrow pipe with oil has a factor of 16,000, making it the highest. The scuba diver is next at 15,000. The submersible is third at 12,300, and the municipal reservoir is lowest at 10,000. The shape and total volume of the containers are irrelevant distractors.

Adım Adım Çözüm

1

Identify the relevant formula and variables for gauge hydrostatic pressure.

The formula is

P = \rho \cdot g \cdot h

. Since gravity (

g

) is constant across all scenarios, we only need to compare the product of density (

\rho

) and depth (

h

) to determine the relative pressures.

This establishes a direct mathematical way to compare the situations without needing to calculate the exact final pressure in Pascals.

2

Evaluate whether container shape or total fluid volume affects the pressure.

We must ignore the 'extremely narrow' pipe and the 'massive, wide' reservoir descriptions.

According to the principles of fluid mechanics, hydrostatic pressure at a specific depth depends only on depth and density, not on the total volume or the shape of the container (this is known as the hydrostatic paradox).

3

Calculate the pressure factor (

\rho \cdot h

) for each scenario.

Submersible:

1025 \cdot 12 = 12,300

. Narrow pipe:

800 \cdot 20 = 16,000

. Reservoir:

1000 \cdot 10 = 10,000

. Scuba diver:

1000 \cdot 15 = 15,000

.

These proportional values allow us to easily and accurately rank the pressures.

4

Rank the calculated values from highest to lowest.

Highest:

16,000

(Narrow pipe). Second:

15,000

(Scuba diver). Third:

12,300

(Submersible). Lowest:

10,000

(Reservoir).

This provides the final correct ordering required by the question.

Anahtar Kavram

Hydrostatic pressure at a given depth is determined solely by the fluid's density and the vertical depth (

P = \rho g h

), and is completely independent of the container's shape or the total volume of fluid.

Soru 1855Soru →

A stationary industrial generator is housed inside a protective metal enclosure. The enclosure is designed with intake vents near the floor and exhaust grilles at the highest point of the roof. When the generator is operating, a steady upward flow of air is maintained through the enclosure even without the use of motorized fans. Which of the following best explains the mechanical principle driving this continuous airflow?

As air absorbs heat from the generator, its density decreases, causing it to rise and exit the top grilles while drawing cooler, denser air in through the floor vents.

The thermal energy causes the surrounding air to contract and become heavier, creating a downward pressure differential that forces air out of the enclosure.

Heat is transferred by direct physical contact between the generator and the metal enclosure, which then mechanically pumps the internal air upward.

Electromagnetic waves radiated by the hot generator physically repel the surrounding air molecules, pushing them away and out through the exhaust grilles.

Cevabı ve açıklamayı göster

Cevap: As air absorbs heat from the generator, its density decreases, causing it to rise and exit the top grilles while drawing cooler, denser air in through the floor vents.

Cevap

The continuous airflow is driven by the fact that as air absorbs heat, its density decreases, causing it to rise and exit the top grilles while drawing cooler, denser air in through the floor vents.

The correct answer accurately describes natural convection. When a fluid like air is heated, the molecules gain kinetic energy and spread further apart (thermal expansion). This makes the heated air less dense than the cooler surrounding air. Because it is less dense, buoyancy forces cause the hot air to rise. As it escapes through the top grilles, cooler, denser air is drawn in through the bottom vents to replace it, establishing a continuous cycle without the need for mechanical fans.

Adım Adım Çözüm

1

Analyze the thermal change occurring inside the enclosure.

The generator produces heat, which is transferred to the surrounding air.

Understanding the source of thermal energy is the first step in identifying the heat transfer mechanism.

2

Determine how the physical properties of the air change when heated.

The air undergoes thermal expansion, meaning its volume increases and its density decreases.

Density changes in fluids (gases and liquids) dictate how they behave under the influence of gravity.

3

Evaluate the movement of the air based on density.

The less dense, heated air becomes buoyant and rises to the top exhaust grilles, creating a low-pressure area at the bottom that pulls in cooler, denser air.

This establishes a continuous, naturally occurring cycle known as natural convection.

Anahtar Kavram

Heat Transfer: Convection

Soru 1856Soru →

A primary driving gear with 20 teeth operates at a speed of $120\text{ rpm}$ . Match each potential driven gear, identified by its tooth count, to the resulting output speed it would produce when directly meshed with this driving gear.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The 10-tooth gear matches to

240\text{ rpm}

, the 20-tooth gear matches to

120\text{ rpm}

, the 40-tooth gear matches to

60\text{ rpm}

, and the 60-tooth gear matches to

40\text{ rpm}

.

The correct matches are derived using the fundamental gear ratio principle: the speed of a driven gear is inversely proportional to its number of teeth compared to the driving gear.

Adım Adım Çözüm

1

Calculate the constant proportional value of the driving gear by multiplying its teeth by its speed.

20 \text{ teeth} \times 120\text{ rpm} = 2400

In a meshed gear system, the product of a gear's tooth count and its rotational speed remains constant for all meshing gears (

T_1 \times S_1 = T_2 \times S_2

).

2

Determine the output speed for each driven gear by dividing the constant value by its respective tooth count.

2400 \div 10 = 240

;

2400 \div 20 = 120

;

2400 \div 40 = 60

;

2400 \div 60 = 40

.

This isolates the unknown speed variable (

S_2

) for each specific gear configuration.

Anahtar Kavram

Gear Ratios and Speed Inverse Proportionality

Soru 1857Soru →

At an Earth-based testing facility (where $g = 10 \text{ m/s}^2$ ), a suspended spring scale reads $750 \text{ N}$ when a communications satellite module is attached to it. The module is later transported to a planetary outpost where the local gravitational acceleration is $4 \text{ m/s}^2$ . Which of the following correctly identifies the module's mass and its new weight at the outpost?

Mass =

75 \text{ kg}

, Weight =

300 \text{ N}

Mass =

75 \text{ kg}

, Weight =

750 \text{ N}

Mass =

750 \text{ kg}

, Weight =

3000 \text{ N}

Mass =

300 \text{ N}

, Weight =

75 \text{ kg}

Cevabı ve açıklamayı göster

Cevap: Mass = $75 \text{ kg}$ , Weight = $300 \text{ N}$

Cevap

Mass =

75 \text{ kg}

, Weight =

300 \text{ N}

The correct answer accurately separates the concepts of mass and weight. First, the mass is found by dividing the Earth weight by Earth's gravity (

750 \text{ N} / 10 \text{ m/s}^2 = 75 \text{ kg}

). Because mass never changes regardless of location, it stays

75 \text{ kg}

. The new weight is then found by multiplying this constant mass by the outpost's gravity (

75 \text{ kg} \times 4 \text{ m/s}^2 = 300 \text{ N}

).

Adım Adım Çözüm

1

Calculate the module's mass using its weight on Earth.

m = \frac{W}{g} = \frac{750 \text{ N}}{10 \text{ m/s}^2} = 75 \text{ kg}

.

Weight is the product of mass and gravitational acceleration (

W = mg

). Rearranging this formula allows us to find the intrinsic mass.

2

Determine the module's mass at the planetary outpost.

The mass remains

75 \text{ kg}

.

Mass is a measure of the amount of matter in an object. It is an invariant property that does not change when moved to a different gravitational field.

3

Calculate the module's new weight at the planetary outpost.

W_{new} = m \times g_{outpost} = 75 \text{ kg} \times 4 \text{ m/s}^2 = 300 \text{ N}

.

Weight is a force that depends on the local gravitational pull. The new weight must be calculated using the outpost's specific gravitational acceleration.

Anahtar Kavram

Mass is an invariant property representing the amount of matter (measured in kilograms), whereas weight is the gravitational force acting on that mass (measured in Newtons) and varies depending on the local gravitational field.

Soru 1858Soru →

A hydraulic lifting mechanism on a heavy-duty forklift contains an input cylinder and an output cylinder. The output cylinder has $5$ times the cross-sectional area of the input cylinder. If the operator applies an input force of $50 \text{ lbs}$ to move the input piston down by $15 \text{ inches}$ , what is the resulting lifting force and how far does the output piston move?

250 \text{ lbs}

of force and

3 \text{ inches}

of movement

250 \text{ lbs}

of force and

75 \text{ inches}

of movement

10 \text{ lbs}

of force and

3 \text{ inches}

of movement

10 \text{ lbs}

of force and

75 \text{ inches}

of movement

Cevabı ve açıklamayı göster

Cevap: $250 \text{ lbs}$ of force and $3 \text{ inches}$ of movement

Cevap

The output cylinder produces

250 \text{ lbs}

of lifting force and moves

3 \text{ inches}

.

The hydraulic system provides a mechanical advantage equal to the ratio of the piston areas. Since the output cylinder has

5

times the area, the output force is

5

times the input force (

50 \times 5 = 250 \text{ lbs}

). However, to conserve energy and fluid volume, the output piston only moves

1/5

of the distance of the input piston (

15 / 5 = 3 \text{ inches}

).

Adım Adım Çözüm

1

Determine the mechanical advantage of the hydraulic system.

Mechanical Advantage =

5

.

The output cylinder has

5

times the cross-sectional area of the input cylinder.

2

Calculate the output lifting force.

F_2 = 50 \times 5 = 250 \text{ lbs}

.

According to Pascal's Principle, force is directly proportional to the area. The larger piston exerts

5

times the force.

3

Calculate the distance the output piston moves.

d_2 = 15 / 5 = 3 \text{ inches}

.

Because the volume of incompressible fluid displaced remains constant, the distance moved is inversely proportional to the area.

Anahtar Kavram

Pascal's Principle and Conservation of Energy in Hydraulics

Tahmini Süre:1m 0s

Soru 1859Soru →

A tower crane is lowering a massive concrete beam to the ground. For a brief period, the beam descends at a constant, steady velocity. According to Newton's First Law, what must be true about the primary forces acting on the beam during this steady descent?

The upward tension in the cable exactly equals the downward weight of the beam, resulting in zero net force.

The downward weight of the beam must exceed the upward tension in order to overcome the beam's inertia and maintain its downward motion.

The upward tension in the cable must be exactly equal to the beam's mass to prevent it from accelerating.

The net downward force acting on the beam is proportional to its steady downward velocity.

Cevabı ve açıklamayı göster

Cevap: The upward tension in the cable exactly equals the downward weight of the beam, resulting in zero net force.

Cevap

The upward tension in the cable exactly equals the downward weight of the beam, resulting in zero net force.

According to Newton's First Law, an object in motion will maintain a constant velocity as long as the net external force acting on it is zero. Since the beam descends at a steady, unchanging speed, its acceleration is zero. Therefore, the upward force (cable tension) and the downward force (beam's weight) must be perfectly equal and balanced.

Adım Adım Çözüm

1

Identify the object's state of motion described in the scenario.

The concrete beam is moving at a constant, steady velocity.

Determining the state of motion (constant velocity vs. accelerating) is the first step in applying Newton's Laws.

2

Apply Newton's First Law of motion to the object's state.

Because the velocity is constant, the acceleration is zero. Therefore, the net external force acting on the beam must be zero.

Newton's First Law dictates that an object maintains a constant velocity if and only if the forces acting upon it are balanced (net force is zero).

3

Evaluate the specific forces acting on the beam.

The primary forces are the downward force of gravity (weight) and the upward force from the cable (tension). To achieve a net force of zero, these opposing forces must be exactly equal in magnitude.

For vertical forces to cancel out and produce a zero net force, the upward pulls must perfectly equal the downward pulls.

Anahtar Kavram

Objects moving in a straight line at a constant velocity have zero acceleration and therefore experience a net force of zero, meaning all opposing forces perfectly balance each other.

Soru 1860Soru →

A structural component fabricated from a material with extremely high hardness and yield strength will always provide superior resistance to sudden, severe impact loads compared to a softer, more ductile material.

Doğru

Yanlış

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False

The statement is false because extremely hard and high-yield-strength materials are usually brittle. They lack the ductility required to absorb the kinetic energy of an impact through plastic deformation (toughness). Therefore, a softer, ductile material might bend or dent, but it will survive a sudden impact load that would cause a much harder material to catastrophically shatter.

Adım Adım Çözüm

1

Analyze the material properties described in the statement: high hardness and high yield strength.

These properties indicate that the material strongly resists scratching, wear, and permanent deformation under static loads.

Identifying the mechanical behavior associated with specific material properties is the first step.

2

Analyze the type of mechanical loading described: sudden, severe impact loads.

Impact loads apply kinetic energy in a very short duration, requiring the material to absorb this shock without failing.

Different types of structural loads (static vs. dynamic) demand entirely different material characteristics.

3

Determine which property governs a material's resistance to impact.

Toughness is the property that allows a material to absorb impact energy, which requires a critical balance of both strength and ductility.

Toughness relates to the total energy a material can absorb before fracturing.

4

Evaluate the relationship between extreme hardness and impact toughness.

Extremely hard materials are generally highly brittle (lacking ductility). Because they cannot deform plastically to absorb energy, they perform poorly and often shatter under severe impact. A softer, more ductile material can bend and absorb the energy.

There is a fundamental trade-off in materials science: increasing a metal's hardness typically decreases its ductility and impact toughness.

Anahtar Kavram

The trade-off between hardness and toughness, and understanding that brittle materials perform poorly under dynamic impact loads.

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram