Examkin

Wire Preparation Tools

12 soru

Tüm türler12Çoktan seçmeli5Eşleştirme4Sıralama3
Soru 1Soru →

Match each wire preparation hand tool with its primary function in electrical fabrication.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Wire strippers
Diagonal cutting pliers (dikes)
Crimping tool
Cable jacket ripper

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Wire strippers match with removing insulation without damaging the inner wire core; Diagonal cutting pliers match with cutting conductors cleanly and trimming excess lead wires; Crimping tool matches with deforming and securing solderless terminal lugs onto bare wire ends; Cable jacket ripper matches with slitting open the outer protective sheath of a multi-conductor cable.
Each tool in wire preparation performs a dedicated function: wire strippers cleanly remove outer insulation without nicking the core; diagonal cutting pliers cut wires and component leads flush; crimpers mechanically compress terminals onto stripped conductors; and cable jacket rippers slit the outer sheath of multi-wire cables.

Adım Adım Çözüm

1
Identify the primary purpose of wire strippers.
Matched with removing insulation from a single conductor without damaging the inner wire core.
Wire strippers use calibrated notches matched to wire gauge to score and remove insulation cleanly.
2
Identify the primary purpose of diagonal cutting pliers (dikes).
Matched with cutting conductors cleanly to length and trimming excess lead wires.
Diagonal cutters have sharp bypass or bevel jaws intended strictly for slicing copper wires and trimming leads.
3
Identify the primary purpose of a crimping tool.
Matched with deforming and securing solderless terminal lugs onto bare wire ends.
Crimpers compress metal terminal barrels around exposed wire strands to create a tight mechanical and electrical bond.
4
Identify the primary purpose of a cable jacket ripper.
Matched with slitting open the outer protective sheath of a multi-conductor cable.
Cable jacket rippers cut through heavy exterior sheathing to expose the internal bundled wires.

Anahtar Kavram

Identifying dedicated wire preparation tools and their correct mechanical applications
Tahmini Süre:45s
Soru 2Soru →

In professional electrical and electronics fabrication, each wire preparation tool is engineered for a specific mechanical operation to preserve conductor integrity and ensure reliable termination. Match each wire preparation tool to its primary operational function.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Calibrated multi-notch wire stripper
Diagonal cutting pliers (dikes)
Ratcheting terminal crimper
Rotary cable jacket slitter

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Calibrated multi-notch wire stripper pairs with severing and drawing off primary insulation at a specific AWG size without scoring the conductor core; Diagonal cutting pliers pairs with trimming excess conductor length and cutting component leads flush; Ratcheting terminal crimper pairs with applying uniform, calibrated compressive force to deform a connector barrel into a gas-tight mechanical bond; Rotary cable jacket slitter pairs with scoring and removing the outer protective sheath of a multi-conductor cable without penetrating inner wire insulation.
Each tool in wire preparation serves a dedicated mechanical step in electrical fabrication: the calibrated wire stripper cleanly removes individual conductor insulation without nicking the core; diagonal cutters cleanly snip conductors and trim leads; ratcheting crimpers produce reliable, gas-tight crimp terminations with controlled pressure; and rotary jacket slitters safely strip the outer multi-conductor jacket without damaging interior conductors.

Adım Adım Çözüm

1
Analyze the mechanical design and primary purpose of the calibrated multi-notch wire stripper.
Identified that precisely sized AWG notches cut insulation only, preventing conductor nicks.
Improper insulation removal weakens wire strength and creates localized electrical resistance.
2
Analyze the function of diagonal cutting pliers (dikes).
Identified that angled cutting edges are designed for clean wire severing and flush lead trimming.
Diagonal cutters are shearing/cutting tools rather than insulation strippers or crimpers.
3
Evaluate the mechanism of a ratcheting terminal crimper.
Identified that the ratcheting cycle guarantees full closure to produce a gas-tight cold-weld connection on terminal lugs.
Controlled compression prevents under-crimping (loose connection) and over-crimping (severed wire strands).
4
Evaluate the specialized role of a rotary cable jacket slitter.
Identified that adjustable blade depth allows stripping the heavy external jacket of bundled cables safely.
Multi-conductor cables require sheath removal without puncturing the individual primary insulation layers beneath.

Anahtar Kavram

Selection and proper application of dedicated wire preparation tools to maintain electrical conductivity, mechanical strength, and insulation integrity.
Tahmini Süre:2m 0s
Soru 3Soru →

While assembling a wiring harness, a technician prepares a 16 AWG stranded copper wire. The technician accidentally places the wire into the 20 AWG notch of a precision wire stripper and closes the handles to strip the insulation. What physical damage occurs to the wire, and what electrical problem does this create in the circuit?

Cevabı ve açıklamayı göster

Cevap: The undersized notch severs outer conductor strands, reducing the effective cross-sectional area and causing localized heating under electrical load.

Cevap

The undersized notch severs outer conductor strands, reducing the effective cross-sectional area and causing localized heating under electrical load.
Because American Wire Gauge numbers are inversely proportional to wire diameter, a 20 AWG opening is significantly smaller than a 16 AWG conductor core. When the stripper closes, the blades cut through the insulation and slice into the outer copper strands of the conductor. This reduction in the wire's cross-sectional area increases electrical resistance at that point, which can cause excessive heat dissipation (I2RI^2R losses) and mechanical failure under vibration.

Adım Adım Çözüm

1
Analyze the relationship between American Wire Gauge (AWG) numbers and conductor diameters.
A 16 AWG wire has a conductor diameter of approximately 0.0508 inches (1.29 mm), whereas a 20 AWG stripper notch is calibrated for a smaller conductor diameter of approximately 0.0320 inches (0.81 mm).
In the AWG system, higher gauge numbers represent smaller wire diameters.
2
Determine the physical impact of placing a larger conductor into an undersized stripper notch.
The stripping blades cut deeper than the thickness of the insulation jacket, penetrating into the conductor bundle and severing or severely nicking multiple outer copper strands.
The calibrated cutting aperture for 20 AWG is substantially smaller than the overall conductor core of a 16 AWG wire.
3
Evaluate the electrical and mechanical consequences of severed conductor strands.
Conductor resistance is inversely proportional to cross-sectional area (R=ρLAR = \rho \frac{L}{A}). Severing strands reduces AA, thereby increasing localized resistance RR and generating excessive heat (P=I2RP = I^2 R) when normal operating current flows.
Current must crowd through fewer intact strands, leading to thermal stress and mechanical weakness at the stripped section.

Anahtar Kavram

AWG Gauge Calibration and Conductor Integrity in Wire Stripping
Tahmini Süre:1m 30s
Soru 4Soru →

When preparing an electrical wire with a standard multi-gauge wire stripper, what is the primary purpose of selecting the notch that matches the wire's American Wire Gauge (AWG) size?

Cevabı ve açıklamayı göster

Cevap: To slice through the insulation cleanly without nicking or cutting the metal conductor

Cevap

To slice through the insulation cleanly without nicking or cutting the metal conductor
Selecting the matching gauge notch ensures the cutting edges penetrate only the depth of the plastic or rubber insulation jacket. This allows the insulation to be pulled free cleanly while leaving the inner conductor structurally intact without nicks or broken strands.

Adım Adım Çözüm

1
Identify the primary function of a wire stripper.
Wire strippers remove the non-conductive insulation jacket to expose the bare metallic wire for electrical termination.
Electrical connections require direct metallic contact with the bare conductor.
2
Analyze how wire stripper notches operate based on AWG sizing.
Each notch is precision-machined to match the exact diameter of the metallic core for a specific gauge size.
When closed, the blades cut entirely through the insulation while leaving sufficient clearance so the core wire is not scored, weakened, or severed.

Anahtar Kavram

Operating principle and gauge selection of wire stripping tools
Tahmini Süre:45s
Soru 5Soru →

An electronics technician needs to attach a solderless ring terminal to the end of a stranded copper conductor. Which specialized wire preparation tool is designed to compress and permanently deform the terminal barrel onto the wire?

Cevabı ve açıklamayı göster

Cevap: Wire crimper

Cevap

Wire crimper
A wire crimper features contoured jaw nests specifically designed to exert uniform compressive force on a solderless connector barrel, creating a reliable mechanical and electrical joint without severing the conductor strands.

Adım Adım Çözüm

1
Identify the primary mechanical operation required by the task.
The task requires compressing and deforming a solderless terminal barrel around exposed conductor strands.
Solderless terminals require controlled mechanical deformation to form a gas-tight, low-resistance electrical and mechanical bond.
2
Select the appropriate electrical hand tool designed for this specific mechanical function.
The wire crimper (crimping tool) is the dedicated hand tool engineered with matching jaw cavities for terminal installation.
Other tools like strippers, cutters, and rippers perform material removal or severing rather than controlled compression.

Anahtar Kavram

Identification and proper application of wire crimping tools in electrical fabrication
Tahmini Süre:45s
Soru 6Soru →

An apprentice electrician is preparing the end of a stranded insulated wire for a screw terminal connection. What is the correct chronological sequence of steps to properly prepare the wire using standard hand tools?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The proper sequence begins with cutting the wire to length, selecting the matching AWG stripper notch, stripping the insulation slug from the conductor, and finally twisting the exposed strands together.
Proper wire preparation follows a logical mechanical progression: first cut the wire to length, then select the matching AWG notch to safeguard the conductor, strip the insulating jacket, and finally twist the exposed strands to prevent splaying.

Adım Adım Çözüm

1
Cut the insulated wire to the required length using diagonal cutters.
A correctly sized piece of insulated wire.
Wire stock must be cut to length before the ends can be prepared.
2
Select the correct AWG notch on the multi-gauge wire stripper.
Proper alignment of the cutting blades with the insulation diameter.
Choosing the matching notch prevents nicking or severing underlying copper strands.
3
Squeeze the handles and pull the insulation jacket off the conductor end.
Exposed bare copper conductor of the required strip length.
Exposes the conductor needed for making an electrical termination.
4
Twist the loose copper strands together clockwise.
A compact, cohesive stranded conductor end.
Keeps loose strands together to prevent stray wire shorts during terminal installation.

Anahtar Kavram

Standard sequential procedure for preparing and stripping stranded insulated wire using dedicated wire preparation hand tools.
Tahmini Süre:45s
Soru 7Soru →

In avionics and precision electronics assembly, technicians utilize distinct wire preparation tools to handle specific wire constructions and termination standards. Match each specialized wire preparation tool with the operational description of its primary function.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Thermal wire stripper
Ratcheting crimper
Rotary coaxial cable stripper
Compound automatic wire stripper

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Thermal wire stripper matches with the tool using heated elements to melt insulation without nicking conductors; Ratcheting crimper matches with the tool applying calibrated compression that will not release until full cycle completion; Rotary coaxial cable stripper matches with the tool using staggered blades for multi-tiered cuts on layered cables; Compound automatic wire stripper matches with the tool that clamps and pulls the insulation slug away in a single squeeze.
Each tool has a specific engineering mechanism designed for reliability: thermal strippers protect critical conductor integrity by eliminating mechanical blade contact; ratcheting crimpers guarantee consistent terminal compression; rotary coaxial strippers prepare multi-layered cable shielding in one rotation; and compound automatic strippers automate grip-and-pull stripping cycles.

Adım Adım Çözüm

1
Identify the working principle of thermal wire strippers
Matched with the description specifying electrically heated elements that prevent nicking fine strands.
Thermal stripping relies on heat rather than sharp shearing edges to sever delicate wire insulation.
2
Identify the key safety and quality feature of a ratcheting crimper
Matched with the description specifying calibrated compression and cycle-dependent jaw release.
The internal ratchet mechanism forces the user to complete the full squeeze stroke so the terminal is properly deformed.
3
Identify the multi-layer capability of rotary coaxial strippers
Matched with the description specifying staggered blades for simultaneous multi-tiered cuts.
Coaxial cables require stepped stripping across jacket, braid, and dielectric layers to fit BNC/SMA connectors.
4
Identify the mechanism of a compound automatic wire stripper
Matched with the description specifying clamping and pulling the insulation slug in one squeeze.
Compound strippers combine a gripping jaw and a pull-apart blade mechanism in a single hand motion.

Anahtar Kavram

Specialized Wire Preparation and Termination Tool Functions
Tahmini Süre:1m 0s
Soru 8Soru →

When preparing electrical conductors, standard multi-gauge wire strippers provide separate calibrated stripping notches for 'SOLID' and 'STRANDED' wire of the same American Wire Gauge (AWG) size. What is the primary physical reason that stranded wire requires a different stripping notch size than solid wire of the identical gauge?

Cevabı ve açıklamayı göster

Cevap: Stranded conductors contain air gaps between the bundled wires, giving them a slightly larger total outer diameter than solid conductors of the identical gauge.

Cevap

Stranded conductors contain air gaps between the bundled wires, giving them a slightly larger total outer diameter than solid conductors of the identical gauge.
American Wire Gauge (AWG) ratings are based on total cross-sectional copper area. Because multiple round strands leave voids (air gaps) when bundled together, a stranded conductor has a slightly larger overall diameter than a solid conductor of the same gauge. Consequently, wire strippers feature dedicated, slightly larger notches for stranded wire to avoid severing or nicking the outer strands.

Adım Adım Çözüm

1
Analyze the physical construction difference between solid and stranded conductors of the same AWG rating.
A solid conductor is a single solid metal cylinder, whereas a stranded conductor is composed of multiple smaller circular wires bundled together.
Although both share the same total cross-sectional area of conductive metal for a given AWG size, the circular cross-sections of individual strands create interstitial air gaps, increasing the overall diameter of the stranded bundle.
2
Relate conductor outer diameter to wire stripper notch selection.
The stripping notch opening must clear the full outer diameter of the conductive core while cutting through the insulation jacket.
Because the stranded wire core has a larger overall diameter than an equivalent solid wire, using the solid notch of the same gauge size would cut into or sever the outer strands. Wire strippers compensate by providing larger notch openings calibrated specifically for stranded conductors.

Anahtar Kavram

Conductor Geometry and Wire Stripper Notch Sizing
Tahmini Süre:1m 0s
Soru 9Soru →

Arrange the following procedural steps in the correct chronological order for preparing and terminating a jacketed multi-conductor electrical cable using standard wire preparation tools.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

Cut the cable to length, remove the outer cable jacket, strip individual conductor insulation, and crimp the terminal lugs.
Proper wire preparation follows an outside-in, progressive procedure: cutting the bulk cable cleanly to length, removing the outer protective sheath with a jacket stripper, stripping the insulation from individual conductors using the correct gauge notch, and finally crimping the solderless terminal lugs onto the exposed bare copper.

Adım Adım Çözüm

1
Size and cut the bulk multi-conductor cable assembly.
A clean, square cable end at the specified total working length.
Cutting to length first establishes the proper dimensions before separating individual sub-components.
2
Use a cable jacket stripper to score and peel away the outer sheath.
The internal bundle of color-coded insulated wires is exposed without damage.
The outer jacket must be removed before the individual wires inside can be accessed or manipulated.
3
Select the appropriate AWG notch on a wire stripper and remove insulation from the end of each conductor.
Bare copper wire ends exposed to the exact insertion depth of the terminal barrel.
Stripping conductor insulation exposes the metal required to make an electrical connection while preserving wire strand integrity.
4
Insert the bare conductor into a terminal lug and compress with a crimping tool.
A mechanically secure and electrically conductive termination.
Crimping permanently secures the terminal to the prepared bare conductor as the final assembly operation.

Anahtar Kavram

Sequential wire preparation workflow using dedicated hand tools
Tahmini Süre:1m 0s
Soru 10Soru →

During the installation of a radio receiver system, a technician must prepare the end of an RG-6 coaxial cable to fit an F-type compression connector. To properly seat the connector, the outer plastic jacket, braided shield foil, and inner dielectric insulator must be stripped at precise staggered depths without nicking the solid center conductor. Which specialized wire preparation tool is designed to perform this multi-tiered strip in a single operation?

Cevabı ve açıklamayı göster

Cevap: Rotary coaxial cable stripper

Cevap

Rotary coaxial cable stripper
A rotary coaxial cable stripper is specifically engineered with two or three staggered, depth-adjustable blades that cut the outer jacket, metallic shield, and dielectric to the exact stepped dimensions required for connector attachment in one rotating motion.

Adım Adım Çözüm

1
Analyze the cable structure and termination requirements
Coaxial cable contains concentric layers: outer jacket, metallic shield braid/foil, dielectric insulator, and central conductor requiring a tiered, staggered strip profile.
Compression and crimp coaxial connectors require the center conductor and dielectric to be exposed at specific, precise lengths for proper impedance matching and electrical contact.
2
Evaluate tool capabilities against the required preparation procedure
The rotary coaxial stripper is equipped with dual or triple staggered blades calibrated to cut each distinct layer to its exact depth simultaneously upon rotation.
Standard single-notch wire strippers or cutters cannot perform multi-level cuts without severe risk of nicking the central conductor or cutting shield braids unevenly.

Anahtar Kavram

Coaxial cable structure and specialized multi-blade stripping tools
Tahmini Süre:45s
Soru 11Soru →

In electrical wiring and cable harness fabrication, technicians must select the proper tool for each distinct wire preparation and termination task. Match each wire preparation tool with its primary function in harness assembly.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Precision wire stripper
Ratcheting wire crimper
Cable jacket slitter
Heat shrink gun

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Precision wire stripper matches cutting through dielectric insulation at specific AWG gauges without nicking the metal core; Ratcheting wire crimper matches compressing solderless lug barrels onto bare conductor strands with calibrated force; Cable jacket slitter matches scoring and stripping outer cable sheaths without penetrating internal conductor insulation; Heat shrink gun matches applying targeted hot air to shrink polyolefin tubing over completed terminations.
Each tool serves a dedicated role in cable preparation: the precision wire stripper removes insulation cleanly using gauge-matched openings, the ratcheting crimper cold-welds terminals to exposed strands with calibrated pressure, the cable jacket slitter safely strips outer sheaths without contacting internal insulation, and the heat shrink gun shrinks protective recovery tubing over finished terminations.

Adım Adım Çözüm

1
Identify the primary function of the precision wire stripper.
Matched with cutting through dielectric insulation at specific AWG gauges without nicking the metal core.
Wire strippers are manufactured with sized circular blades corresponding to American Wire Gauge (AWG) standards to shear only the plastic or rubber insulation jacket.
2
Identify the primary function of the ratcheting wire crimper.
Matched with compressing solderless lug barrels onto bare conductor strands with calibrated force.
Ratcheting mechanisms ensure terminal barrels undergo adequate plastic deformation without under-crimping or over-shearing the wire.
3
Identify the primary function of the cable jacket slitter.
Matched with scoring and stripping outer cable sheaths without penetrating internal conductor insulation.
Multi-conductor cables require an adjustable circumference or longitudinal blade that peels only the outer PVC or rubber jacket.
4
Identify the primary function of the heat shrink gun.
Matched with applying targeted hot air to shrink polyolefin tubing over completed terminations.
Controlled hot airflow radially shrinks recovery sleeves to provide environmental sealing, strain relief, and electrical insulation.

Anahtar Kavram

Selecting and applying specialized wire preparation tools to ensure reliable mechanical and electrical connections without damaging conductor strands or insulation layers.
Tahmini Süre:1m 0s
Soru 12Soru →

An electronics technician is preparing a piece of stranded 18 AWG copper hookup wire to attach an insulated crimp terminal. What is the correct chronological sequence of steps the technician should follow using standard wire preparation tools?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

Cut wire with diagonal cutters → Strip insulation with calibrated wire stripper → Inspect and twist bare strands → Crimp terminal barrel with crimper → Perform mechanical pull test
The proper sequence follows standard electrical assembly protocol: cutting the conductor to length with diagonal cutters, removing insulation using a properly matched wire stripper notch, inspecting and twisting exposed stranded conductors, seating and compressing the terminal barrel with a crimper, and concluding with a physical pull test to verify mechanical integrity.

Adım Adım Çözüm

1
Cut the conductor to length using diagonal cutters (dikes).
Clean cut at the desired total wire length.
Establishing the proper harness length must precede all end-preparation tasks.
2
Select the correct AWG stranded gauge notch on a wire stripper and remove the outer insulation jacket to the manufacturer's recommended strip length.
Cleanly exposed bare conductor strands without severed or nicked wire strands.
Using the matching gauge notch cuts through the insulation without cutting into the metal conductor.
3
Inspect the bare wire strands for any damage and twist the strands clockwise.
A compact, cohesive stranded bundle ready for insertion.
Twisting prevents stray strands from catching outside the barrel and creating a short circuit or high-resistance connection.
4
Seat the stripped conductor into the barrel of the crimp terminal and compress the joint using the appropriate color-coded or sized crimper jaw.
Cold-welded, mechanically deformed gas-tight crimp connection.
The crimping tool applies precise pressure to bond the terminal barrel to the conductor.
5
Gently pull the wire and terminal in opposing directions.
Verification that the wire does not slip out under tension.
A pull test confirms that the crimp has sufficient mechanical retention before placing the wire into service.

Anahtar Kavram

Standard wire preparation, stripping, and crimp termination procedure
Tahmini Süre:1m 0s