Examkin

Ecology

227 soru

Tüm türler227Çoktan seçmeli105Doğru / Yanlış13Sayısal8Eşleştirme59Sıralama42
Soru 1Soru →

An ecologist studying an aquatic ecosystem needs to measure the turbidity and depth of light penetration in a pond. Which of the following instruments is most suitable for this measurement?

Cevabı ve açıklamayı göster

Cevap: Secchi disc

Cevap

Secchi disc
The Secchi disc is specifically designed for aquatic sampling to quantify turbidity and determine the euphotic zone boundary based on light penetration.

Adım Adım Çözüm

1
Identify the target ecological factor being measured
The factor is turbidity / depth of light penetration in an aquatic habitat.
Different physical abiotic factors require specific measuring instruments designed for aquatic or terrestrial environments.
2
Select the corresponding measuring instrument
A Secchi disc is used to measure water transparency and light penetration depth.
The depth at which the alternating black and white quadrants on the disc disappear from view indicates the extent of light penetration.

Anahtar Kavram

Measurement of Abiotic Ecological Factors
Soru 2Soru →

Arrange the following organisms in order of DECREASING available energy in a terrestrial food chain, starting with the organism that contains the highest amount of available energy:

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order from highest to lowest available energy is Grass (Producer) → Grasshopper (Primary Consumer) → Toad (Secondary Consumer) → Hawk (Tertiary Consumer).
The correct sequence begins with the primary producer (Grass), which traps radiant sunlight into chemical energy. Energy is lost as heat at each metabolic transfer step, so primary consumers (Grasshopper) receive less energy than producers, secondary consumers (Toad) receive less than primary consumers, and tertiary consumers (Hawk) receive the least energy.

Adım Adım Çözüm

1
Identify the trophic role of each organism
Grass is the primary producer, grasshopper is the herbivore (primary consumer), toad is a carnivore (secondary consumer), and hawk is a apex/tertiary consumer.
Energy flows sequentially from producers through consumers in a food chain.
2
Apply the principles of energy transfer efficiency (10% law)
Energy decreases progressive at each higher trophic level due to metabolic heat loss, respiration, and non-consumed biomass.
Only approximately 10% of energy stored in biomass at one level is transferred to the next level.
3
Sequence the organisms from highest energy to lowest energy
Grass > Grasshopper > Toad > Hawk.
Producers hold the maximum energy, while top predators receive the minimum available energy.

Anahtar Kavram

Unidirectional flow of energy and progressive energy loss across trophic levels in an ecosystem.
Soru 3Soru →

An ecology student deployed a 1 m21\text{ m}^2 quadrat 10 times in a farmland ecosystem in Nigeria to estimate the population of a weed species. The total count of the weed recorded across all 10 quadrats was 50. What is the estimated population density of the weed per square metre?

Cevabı ve açıklamayı göster

Cevap: 5 weeds/m25\text{ weeds/m}^2

Cevap

The population density of the weed is 5 weeds/m25\text{ weeds/m}^2.
Population density is computed by dividing the total number of individuals counted by the total sampled area. In this scenario, 50 weeds/(10×1 m2)=5 weeds/m250\text{ weeds} / (10 \times 1\text{ m}^2) = 5\text{ weeds/m}^2.

Adım Adım Çözüm

1
Calculate the total surface area sampled by all quadrats.
Total Area = 10 quadrats×1 m2/quadrat=10 m210 \text{ quadrats} \times 1\text{ m}^2/\text{quadrat} = 10\text{ m}^2.
Population density calculation requires knowing the total area over which samples were taken.
2
Divide the total count of organisms by the total sampled area.
Density = 50 weeds10 m2=5 weeds/m2\frac{50\text{ weeds}}{10\text{ m}^2} = 5\text{ weeds/m}^2.
Population density is defined as the number of individuals of a species per unit area.

Anahtar Kavram

Quadrat Sampling and Population Density
Tahmini Süre:45s
Soru 4Soru →

In a tropical mangrove estuarine ecosystem, solar energy fixed during primary productivity flows through a sequential food chain. Consider the following four organisms inhabiting this ecosystem:

Arrange these organisms in order from HIGHEST to LOWEST available energy (kJ⋅m−2⋅yr−1kJ \cdot m^{-2} \cdot yr^{-1}) present at their respective trophic levels.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

Red mangrove tree (*Rhizophora mangle*) → Mangrove tree crab (*Aratus pisonii*) → Mangrove snapper (*Lutjanus griseus*) → Osprey (*Pandion haliaetus*)
Energy flow through an ecosystem is unidirectional and non-cyclic. According to the Second Law of Thermodynamics and the 10% energy transfer rule, metabolic respiration, excretion, and heat dissipation result in inevitable energy losses at each step. Consequently, the total available energy per unit area per year strictly decreases from primary producers at the base (Red mangrove tree) to primary consumers (Mangrove tree crab), secondary consumers (Mangrove snapper), and tertiary consumers (Osprey).

Adım Adım Çözüm

1
Identify the trophic level and ecological role of each listed organism.
Red mangrove is a primary producer (T1), Mangrove tree crab is a primary consumer (T2), Mangrove snapper is a secondary consumer (T3), and Osprey is a tertiary consumer (T4).
Determining trophic position is essential for establishing the sequence of energy transfer.
2
Apply the principles of ecological energy flow and thermodynamic laws across trophic levels.
Energy flow is strictly unidirectional, with roughly 80% to 90% of available energy lost as heat and metabolic work at each transfer step.
The Second Law of Thermodynamics dictates that energy transformation is inefficient, causing available energy to decrease progressively from lower to higher trophic levels.
3
Sequence the organisms from highest available energy (T1) to lowest available energy (T4).
The correct order from highest to lowest available energy is Red mangrove tree → Mangrove tree crab → Mangrove snapper → Osprey.
Primary producers hold the highest energy budget, while apex predators at the top of the food chain receive the least.

Anahtar Kavram

Unidirectional Energy Transfer and Thermodynamic Dissipation in Trophic Pyramids
Soru 5Soru →

During an ecological survey of a savanna ecosystem in Nigeria, 40 grasshoppers were captured, marked with non-toxic paint, and released back into their habitat. A second sample of 50 grasshoppers captured two days later contained 10 marked individuals. What is the estimated total population size of grasshoppers in this habitat?

Cevabı ve açıklamayı göster

Cevap: 200

Cevap

The estimated total population size of grasshoppers is 200.
Applying the Lincoln Index formula N=M×CRN = \frac{M \times C}{R} with M=40M = 40 marked initially, C=50C = 50 in the second capture, and R=10R = 10 recaptured marked individuals gives N=40×5010=200N = \frac{40 \times 50}{10} = 200 grasshoppers.

Adım Adım Çözüm

1
Identify the values from the capture-recapture sampling data.
Initial marked individuals M=40M = 40, second sample size C=50C = 50, recaptured marked individuals R=10R = 10.
These parameters are required for the Lincoln Index population size estimation formula.
2
Calculate the population size using N=M×CRN = \frac{M \times C}{R}.
N=40×5010=200N = \frac{40 \times 50}{10} = 200.
Multiplying the size of the first sample by the size of the second sample and dividing by the number of recaptured marked individuals yields the total population estimate.

Anahtar Kavram

Lincoln Index (Capture-Mark-Recapture Method)
Soru 6Soru →

An ecological assessment of coastal vegetation along the Gulf of Guinea highlights specific environmental stressors, including unstable muddy substrate, periodic anaerobic waterlogging, and high ambient salinity. Which combination of anatomical and physiological adaptations enables the red mangrove (*Rhizophora racemosa*) to establish dominance in the intertidal mangrove swamp biome of southern Nigeria?

Cevabı ve açıklamayı göster

Cevap: Stilt roots for mechanical support in soft mud, pneumatophores with lenticels for aerial gaseous exchange, and root cell membranes capable of ultrafiltration to exclude salt

Cevap

Stilt roots for mechanical support in soft mud, pneumatophores with lenticels for aerial gaseous exchange, and root cell membranes capable of ultrafiltration to exclude salt
The red mangrove (*Rhizophora racemosa*) is a dominant plant species in the coastal mangrove biomes of southern Nigeria. It possesses arched stilt roots that anchor the tree firmly in soft, muddy intertidal soils against tidal movements. To overcome the anaerobic (oxygen-deficient) conditions of waterlogged mud, it uses respiratory roots (pneumatophores) covered with lenticels for atmospheric gaseous exchange. Furthermore, ultrafiltration in the root cell membranes prevents high concentrations of salt from entering the vascular system.

Adım Adım Çözüm

1
Analyze the abiotic challenges of the intertidal mangrove biome
Identified major environmental factors: high salinity, muddy unstable substrate, and anaerobic soil conditions during high tide.
Plant adaptations must directly address these specific abiotic stress factors.
2
Evaluate morphological features for physical stability and aeration
Red mangroves utilize prop/stilt roots extending from the trunk into soft sediment for support, and pneumatophores with lenticels for breathing above waterlogged soil.
Morphological modifications prevent uprooting by waves and allow atmospheric oxygen uptake.
3
Evaluate physiological mechanisms for osmoregulation
Rhizophora roots employ non-energy-intensive ultrafiltration mechanisms at the root cortex to block salt entry while taking up water.
High soil salinity requires specialized physiological filtration to maintain positive water potential gradient.

Anahtar Kavram

Structural and physiological adaptations of halophytes in mangrove swamp biomes
Tahmini Süre:1m 30s
Soru 7Soru →

An ecologist used a 2 m×2 m2\text{ m} \times 2\text{ m} quadrat frame thrown randomly 15 times across a 1.2 hectare1.2\text{ hectare} (12,000 m212,000\text{ m}^2) savanna habitat in Yankari Game Reserve to estimate the population size of the variegated grasshopper (*Zonocerus variegatus*). A total of 180 grasshoppers were counted across all 15 quadrat throws. What is the estimated total population of *Zonocerus variegatus* in the entire 1.2 hectare1.2\text{ hectare} study area?

Cevabı ve açıklamayı göster

Cevap: 36000

Cevap

The estimated total population of *Zonocerus variegatus* in the entire study area is 36,000 grasshoppers.
To estimate total population, first calculate total sampled area (15×4 m2=60 m215 \times 4\text{ m}^2 = 60\text{ m}^2). Dividing total individuals counted (180180) by total sampled area (60 m260\text{ m}^2) yields a mean density of 3 grasshoppers/m23\text{ grasshoppers/m}^2. Extrapolating this density across the total study area (12,000 m212,000\text{ m}^2) gives 3×12,000=36,0003 \times 12,000 = 36,000 grasshoppers.

Adım Adım Çözüm

1
Calculate the surface area of one quadrat frame
2 m×2 m=4 m22\text{ m} \times 2\text{ m} = 4\text{ m}^2
Establishing the individual quadrat area is required to find the total sampling footprint.
2
Determine the total area sampled across all 15 quadrat throws
15×4 m2=60 m215 \times 4\text{ m}^2 = 60\text{ m}^2
Multiplying single quadrat area by total throws gives the aggregate area sampled.
3
Compute the mean population density per square meter
180 grasshoppers60 m2=3 grasshoppers/m2\frac{180\text{ grasshoppers}}{60\text{ m}^2} = 3\text{ grasshoppers/m}^2
Population density is defined as the total number of organisms counted divided by total sampled area.
4
Extrapolate population density to the total study area
3 grasshoppers/m2×12,000 m2=36,000 grasshoppers3\text{ grasshoppers/m}^2 \times 12,000\text{ m}^2 = 36,000\text{ grasshoppers}
Multiplying density by the full area of the ecosystem section yields the total estimated population.

Anahtar Kavram

Quadrat Sampling and Population Extrapolation
Soru 8Soru →

Establishing game reserves and national parks represents a primary method of ex-situ conservation because wild populations are isolated from human interference within designated boundary zones.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is false because game reserves and national parks conserve organisms in their original habitats, making them examples of in-situ conservation rather than ex-situ conservation.
The statement is false because protecting biodiversity within natural ecosystems—such as in game reserves, biosphere reserves, and national parks—is defined as in-situ (on-site) conservation. Ex-situ (off-site) conservation involves removing organisms from their natural habitats to artificial environments like botanical gardens, zoological parks, or seed banks.

Adım Adım Çözüm

1
Define in-situ and ex-situ conservation strategies.
In-situ conservation preserves wild species within their natural ecosystems, whereas ex-situ conservation preserves species outside their natural surroundings.
Establishing clear definitions is necessary to categorize protected area management correctly.
2
Examine the operational environment of national parks and game reserves.
National parks maintain natural flora and fauna within their original geographic habitats without relocating them.
Determining where species reside within these reserves clarifies the mode of conservation.
3
Evaluate the statement's claim.
Classifying national parks as ex-situ conservation is false because the protection occurs on-site (in-situ).
Concluding the validity assessment of the given statement.

Anahtar Kavram

In-situ versus Ex-situ Conservation of Wildlife
Soru 9Soru →

Marine ecosystems display distinct vertical zonation based on environmental gradients such as light penetration, temperature, and pressure. Arrange the following marine depth zones in order from the water surface down to the ocean floor.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from the surface to the ocean bed is Euphotic (Epipelagic) zone, Mesopelagic zone, Bathypelagic zone, and Abyssal zone.
Aquatic marine biomes are vertically stratified according to light availability and depth. Starting from the surface, sunlight fuels the Euphotic zone (0−200 m0 - 200\text{ m}), followed by the dim Mesopelagic zone (200−1000 m200 - 1000\text{ m}), the completely dark Bathypelagic zone (1000−4000 m1000 - 4000\text{ m}), and finally the deep abyssal plain of the Abyssal zone (4000−6000 m4000 - 6000\text{ m}).

Adım Adım Çözüm

1
Identify the surface photic layer.
The Euphotic zone is at the top (0−200 m0 - 200\text{ m}).
Sunlight penetrates most strongly at the water surface, driving primary productivity.
2
Locate the intermediate twilight layer.
The Mesopelagic zone lies directly below the photic zone (200−1000 m200 - 1000\text{ m}).
Sunlight rapidly attenuates with depth, creating dim twilight conditions.
3
Determine the upper aphotic layer.
The Bathypelagic zone extends from 1000−4000 m1000 - 4000\text{ m}.
Sunlight is completely absent below 1000 m1000\text{ m} in open ocean waters.
4
Identify the deepest benthic and pelagic abyssal region.
The Abyssal zone sits at the deepest section along the ocean floor (4000−6000 m4000 - 6000\text{ m}).
This zone represents the abyss above ocean trenches.

Anahtar Kavram

Marine Aquatic Zonation and Light Penetration Gradients
Soru 10Soru →

An environmental protection agency in a tropical agricultural region observed severe topsoil degradation due to surface runoff and a sharp decline in soil fertility. To achieve sustainable land management, ecologists recommended integrating a biological conservation method that replenishes soil nitrates naturally alongside a physical conservation technique that retards water runoff velocity on hilly terrain. Which of the following combinations of practices best satisfies both requirements?

Cevabı ve açıklamayı göster

Cevap: Cultivating leguminous cover crops and constructing contour bunds across slopes

Cevap

Cultivating leguminous cover crops and constructing contour bunds across slopes
The combination of cultivating leguminous cover crops and constructing contour bunds addresses both critical aspects of sustainable land conservation. Legumes work symbiotically with nitrogen-fixing bacteria to enrich the soil with organic nitrates, while contour bunds physically alter the topography to slow surface runoff and reduce topsoil erosion on sloped agricultural lands.

Adım Adım Çözüm

1
Identify the biological requirement for natural nitrate replenishment
Leguminous plants form symbiotic associations with nitrogen-fixing bacteria (Rhizobium) in their root nodules, converting atmospheric nitrogen into nitrates naturally.
This avoids reliance on synthetic fertilizers, preventing eutrophication and restoring soil fertility biologically.
2
Identify the physical engineering requirement for erosion control on slopes
Contour bunds (embankments constructed along lines of equal elevation) reduce slope length and slow down runoff velocity.
Lowering runoff speed prevents sheet and rill erosion while promoting water infiltration into the soil profile.
3
Synthesize the combined practice
Combining leguminous cover crops with contour bunding simultaneously addresses biological soil restoration and physical runoff control.
Integrated natural resource management requires multi-faceted biological and physical interventions.

Anahtar Kavram

Integrated Soil Conservation and Biological Nitrogen Fixation
Soru 11Soru →

In wading birds standing in ice-cold water, counter-current heat exchange between adjacent arteries and veins in the legs cools outgoing arterial blood before it reaches the feet, thereby reducing conductive heat loss to the surrounding environment.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True
Counter-current heat exchange is a classic morphological and physiological adaptation in wading birds. By running warm arterial blood past cold venous blood in the leg's vascular network (rete mirabile), heat is transferred back into the body core before arterial blood reaches the foot. This keeps foot temperature low, lowering the thermal gradient against cold water and conserving body heat.

Adım Adım Çözüm

1
Identify the primary environmental challenge faced by wading birds in cold aquatic habitats.
Cold water quickly absorbs body heat through exposed, non-insulated extremities like legs and feet.
Maintaining homeothermy requires organisms to minimize thermal loss across surfaces exposed to low temperatures.
2
Analyze the anatomical and physiological mechanism of counter-current exchange in limbs.
Arteries carrying warm blood from the core run immediately parallel to veins carrying cold blood returning from the feet.
Heat naturally flows down the thermal gradient from warm arterial blood to cooler venous blood.
3
Determine the functional outcome on foot temperature and environmental heat exchange.
Arterial blood is pre-cooled prior to reaching the foot, reducing the temperature difference between the foot and water.
Conductive heat loss rate is directly proportional to the temperature differential between an organism's surface and its surroundings.

Anahtar Kavram

Counter-current Heat Exchange for Thermoregulation
Tahmini Süre:1m 0s
Soru 12Soru →

Xerophytic plants typically possess a thick waxy cuticle on their leaf surfaces as a morphological adaptation to minimize cuticular transpiration in arid environments.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

The statement is true because a thick waxy cuticle provides an impermeable physical barrier on the leaf epidermis, reducing non-stomatal water loss in plants adapted to dry habitats.
The statement is true because xerophytic plants possess a thick, waxy cuticle over their leaf surfaces specifically to cut down on cuticular water loss and endure prolonged periods of dry conditions.

Adım Adım Çözüm

1
Identify the ecological group and environment described.
The organism is a xerophyte, which lives in arid or drought-prone environments.
Environmental conditions determine the survival pressures acting on the organism.
2
Analyze the function of the thick waxy cuticle.
Wax is hydrophobic and prevents water movement across the epidermal cell layer.
Structural features that limit evaporation conserve limited internal water reserves.
3
Conclude whether this represents an authentic morphological adaptation.
Reducing cuticular transpiration via a thick waxy cuticle is a confirmed morphological adaptation in xerophytic plants.
The factual claim in the statement is fully correct.

Anahtar Kavram

Morphological Adaptations of Xerophytes to Water Conservation
Soru 13Soru →

An ecologist studying a freshwater habitat needs to determine the depth of light penetration (turbidity) in the water body and the relative humidity of the surrounding air. Which pair of instruments should be selected for these respective measurements?

Cevabı ve açıklamayı göster

Cevap: Secchi disc and hygrometer

Cevap

Secchi disc and hygrometer
The Secchi disc is a circular disc used in aquatic ecology to gauge water clarity and the depth to which solar radiation penetrates. Relative humidity, which measures moisture in the atmosphere, is recorded using a hygrometer.

Adım Adım Çözüm

1
Identify the instrument used to measure water transparency and light penetration depth in aquatic habitats.
A Secchi disc is lowered into the water until it is no longer visible to measure turbidity/light penetration depth.
Light penetration in water bodies directly influences aquatic plant photosynthesis and distribution.
2
Identify the instrument used to measure atmospheric humidity.
A hygrometer (or wet-and-dry bulb psychrometer) measures relative humidity of the air.
Humidity is a vital abiotic climatic factor affecting transpiration and evaporation rates.
3
Match both required instruments in the specified order.
The correct sequence is Secchi disc followed by hygrometer.
This combination accurately pairs the aquatic factor (light penetration) and atmospheric factor (humidity) with their respective instruments.

Anahtar Kavram

Measurement of Abiotic Ecological Factors
Soru 14Soru →

A biology student wishes to measure the moisture content of a soil sample collected from a farmland. Arrange the following laboratory procedure steps in the correct sequential order from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order of steps is: (1) Weigh the freshly collected soil sample immediately to determine its initial fresh mass, (2) Place the soil sample in an oven maintained at 105∘C105^\circ\text{C} to evaporate moisture, (3) Cool the sample inside a desiccator and re-weigh it until a constant dry mass is obtained, and (4) Calculate the difference between the fresh mass and constant dry mass to express water content as a percentage.
Measuring soil moisture requires establishing an initial fresh mass, evaporating the water by oven drying at 105∘C105^\circ\text{C}, cooling in a moisture-free desiccator until a constant dry mass is reached, and finally computing the percentage loss of mass.

Adım Adım Çözüm

1
Measure baseline fresh mass
Obtain initial mass containing both dry soil solids and water.
A starting mass is required to compute the total mass lost as water.
2
Evaporate water content
Water leaves the sample as steam.
Oven drying at 105∘C105^\circ\text{C} removes water without decomposing organic components.
3
Cool safely and verify complete drying
Obtain true dry mass.
Desiccators prevent re-absorption of atmospheric moisture; achieving constant mass ensures all water was removed.
4
Calculate moisture percentage
Determine soil moisture percentage using Fresh Mass−Dry MassFresh Mass×100%\frac{\text{Fresh Mass} - \text{Dry Mass}}{\text{Fresh Mass}} \times 100\%.
Quantifies the edaphic factor (water content) relative to the fresh sample mass.

Anahtar Kavram

Measurement of Edaphic Factors (Soil Water Content)
Tahmini Süre:1m 0s
Soru 15Soru →

Arrange the following Nigerian ecological vegetation zones in sequence from the zone receiving the lowest mean annual precipitation to the zone receiving the highest mean annual precipitation.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from lowest to highest mean annual rainfall is: Sahel Savanna, Sudan Savanna, Southern Guinea Savanna, Tropical Rainforest, and Mangrove Swamp Forest.
In Nigeria, mean annual rainfall follows a steep gradient running from South to North. The coastal Mangrove Swamp Forest receives the highest rainfall (>2500 mm per year), followed by the southern inland Tropical Rainforest (1500–2500 mm). Moving into the savanna belts, the Southern Guinea Savanna receives 1000–1500 mm, the Sudan Savanna receives 500–1000 mm, and the northernmost Sahel Savanna receives the lowest rainfall (<500 mm). Thus, the correct sequence from lowest to highest rainfall begins with Sahel Savanna and ends with Mangrove Swamp Forest.

Adım Adım Çözüm

1
Analyze the latitudinal climatic gradient across Nigeria from North to South.
Identified that annual precipitation increases consistently from the arid northern border down to the Atlantic coastal south.
The moisture-laden Maritime Tropical air mass brings rain from the Atlantic Ocean, depositing maximum rainfall at the coast and diminishing inland toward the north.
2
Assign mean annual precipitation ranges to each specified ecological zone.
Sahel (<500 mm) < Sudan (500–1000 mm) < Southern Guinea (1000–1500 mm) < Rainforest (1500–2500 mm) < Mangrove (>2500 mm).
Vegetation structure directly reflects the moisture availability across these ecological belts.
3
Sequence the items incrementally according to precipitation values.
The final ordered sequence progresses from Sahel Savanna to Sudan Savanna, Southern Guinea Savanna, Tropical Rainforest, and lastly Mangrove Swamp Forest.
This establishes the strict progression requested by the prompt.

Anahtar Kavram

Nigerian ecological zones and environmental precipitation gradients
Soru 16Soru →

An ecologist investigated abiotic parameters across a transitional estuarine ecosystem. To evaluate environmental factors, the following instruments were deployed:

- Device I: A circular plate with alternating black and white quadrants, lowered into the water column until it was no longer visible to record light penetration depth.
- Device II: A pair of thermometers—one dry and one with a moistened bulb wrapper—used to calculate atmospheric moisture saturation.
- Device III: An instrument fitted with rotating hemispherical cups attached to a central vertical shaft to record atmospheric movement velocity.

Which option correctly identifies Devices I, II, and III along with the respective ecological factors they measure?

Cevabı ve açıklamayı göster

Cevap: Device I: Secchi disc measuring turbidity; Device II: Psychrometer measuring relative humidity; Device III: Anemometer measuring wind speed

Cevap

Device I is a Secchi disc (measuring turbidity/light penetration depth), Device II is a psychrometer (measuring relative humidity), and Device III is an anemometer (measuring wind speed).
The option identifying Device I as a Secchi disc measuring turbidity, Device II as a psychrometer measuring relative humidity, and Device III as an anemometer measuring wind speed is correct because each instrument's operating principle matches the described field procedure.

Adım Adım Çözüm

1
Analyze Device I function
A circular plate with black and white quadrants lowered into water to measure light penetration depth is a Secchi disc, which quantifies water turbidity.
Secchi discs measure the depth of light penetration in aquatic habitats.
2
Analyze Device II function
A paired dry-bulb and wet-bulb thermometer setup used to measure moisture content in the atmosphere is a psychrometer (or wet-and-dry bulb hygrometer), which determines relative humidity.
Evaporative cooling on the wet bulb creates a temperature difference used to find humidity percentages.
3
Analyze Device III function
An instrument with rotating hemispherical cups driven by air movement measures wind speed and is called an anemometer.
The rotation speed of the cups corresponds directly to wind velocity.
4
Synthesize and match options
Matching all three instruments yields Secchi disc (turbidity), psychrometer (relative humidity), and anemometer (wind speed).
Only the combination pairing Secchi disc, psychrometer, and anemometer accurately attributes all three instruments and their measured factors.

Anahtar Kavram

Ecological Factors and Their Measurement
Tahmini Süre:2m 0s
Soru 17Soru →

An ecologist is quantifying water clarity and light penetration in a pond ecosystem. Arrange the following procedural steps for measuring turbidity using a Secchi disc in the correct chronological sequence from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order of steps for using a Secchi disc is: first, lower the disc until it disappears and mark depth d1d_1; second, slowly raise the disc until it reappears and mark depth d2d_2; third, calculate the mean of d1d_1 and d2d_2; and fourth, interpret the mean value to determine turbidity and euphotic zone depth.
The correct procedural order begins with submerging the Secchi disc until it vanishes from sight to measure d1d_1, followed by pulling it up until it becomes visible again to measure d2d_2. Once both depths are recorded, their average is calculated to minimize observation errors, and finally, this mean depth is used to evaluate the aquatic environment's turbidity.

Adım Adım Çözüm

1
Lower the Secchi disc into the water body.
Identify the depth d1d_1 where the black and white quadrants disappear from view due to light absorption and scattering.
This establishes the lower boundary of visual transparency.
2
Raise the Secchi disc slowly from depth d1d_1.
Identify the depth d2d_2 where the quadrants first reappear to the observer's eye.
Reappearance depth controls for human error, surface reflection, and glare.
3
Compute the average depth.
Obtain the Secchi transparency depth using d1+d22\frac{d_1 + d_2}{2}.
Averaging the two depth values yields a standardized, reliable measurement of light penetration.
4
Correlate the transparency depth with ecological parameters.
Determine water turbidity (inversely related to Secchi depth) and calculate photic zone boundary.
Higher Secchi depth indicates clearer water (low turbidity), whereas lower depth indicates suspended solids or algal blooms (high turbidity).

Anahtar Kavram

Measurement of Water Turbidity and Transparency using a Secchi Disc
Soru 18Soru →

An ecologist conducting a field study on a freshwater pond needs to quantify water turbidity and light penetration. Arrange the following procedural steps in the correct chronological sequence for taking an accurate measurement using a Secchi disc, starting from the initial deployment of the instrument to the final data calculation.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct procedural sequence is: lower the Secchi disc until it disappears, record the disappearance depth (d1d_1), raise the disc until it reappears and record the reappearance depth (d2d_2), and finally calculate the average depth using d1+d22\frac{d_1 + d_2}{2}.
The standard ecological method for measuring water transparency requires lowering the Secchi disc until it disappears (d1d_1), recording that depth, then raising it until it re-emerges (d2d_2) and recording that second depth. The mean of d1d_1 and d2d_2 calculated via d1+d22\frac{d_1 + d_2}{2} defines the Secchi disc transparency, which correlates with the depth of the euphotic zone.

Adım Adım Çözüm

1
Deploy the Secchi disc into the water body.
The disc is lowered vertically on the shaded side to eliminate surface glare until the pattern disappears.
Eliminating reflection ensures accurate observation of the point of disappearance.
2
Measure the disappearance depth.
The depth point on the graduated rope is noted as d1d_1.
This establishes the lower boundary of visual transparency.
3
Ascertain the reappearance threshold.
The disc is pulled upward slowly until visible again, giving depth d2d_2.
This establishes the upper boundary of visual transparency.
4
Compute the light penetration depth.
The transparency limit is calculated as d1+d22\frac{d_1 + d_2}{2}.
Averaging both values minimizes observational error and yields the Secchi disc transparency depth.

Anahtar Kavram

Procedural measurement of water transparency and photic zone depth using a Secchi disc
Soru 19Soru →

Which of the following soil bacteria is directly responsible for converting nitrites into nitrates during the nitrogen cycle?

Cevabı ve açıklamayı göster

Cevap: Nitrobacter

Cevap

Nitrobacter
Nitrification is a two-step aerobic bacterial conversion. In the first step, Nitrosomonas oxidizes ammonia into nitrites (NO2−NO_2^-). In the second step, Nitrobacter oxidizes nitrites into nitrates (NO3−NO_3^-), which is the primary form of nitrogen absorbed by plant roots.

Adım Adım Çözüm

1
Identify the stage of the nitrogen cycle described in the question.
The stage involving the oxidation of nitrites (NO2−NO_2^-) into nitrates (NO3−NO_3^-) is the second step of nitrification.
Nitrification occurs in two sequential steps mediated by distinct chemoautotrophic bacteria.
2
Match the appropriate bacterial genus to this specific chemical transformation.
Nitrosomonas converts ammonia (NH3NH_3) to nitrite (NO2−NO_2^-), whereas Nitrobacter converts nitrite (NO2−NO_2^-) to nitrate (NO3−NO_3^-).
Nitrobacter derives metabolic energy specifically from the oxidation of nitrite to nitrate.

Anahtar Kavram

Nitrification process in the nitrogen cycle
Soru 20Soru →

In an ecological investigation comparing microclimatic conditions across a savanna ecosystem, a researcher needs to quantify the speed of air currents. Which of the following instruments is designed for this specific measurement?

Cevabı ve açıklamayı göster

Cevap: Anemometer

Cevap

An anemometer is the instrument used to measure wind speed.
An anemometer is the standard ecological instrument calibrated to measure wind speed, an essential climatic factor affecting transpiration and evaporation rates.

Adım Adım Çözüm

1
Identify the target abiotic ecological factor described in the stem.
The target factor is the speed of air currents (wind speed).
The scenario highlights measuring how fast air moves across a savanna ecosystem.
2
Match the target factor with its standard ecological measuring instrument.
An anemometer is chosen.
Anemometers consist of rotating cups or propellers calibrated to record wind speed.

Anahtar Kavram

Measurement of abiotic ecological factors using appropriate instruments
Tahmini Süre:1m 0s
Sayfa 1 / 12Sonraki
Ecology Alıştırma Soruları — JAMB UTME | Examkin