Examkin

Tüm alıştırma soruları

1884 soru

Tüm türler1,884Çoktan seçmeli962Çoklu seçim84Doğru / Yanlış379Sayısal32Eşleştirme249Sıralama178
Soru 501Soru →

You are driving uphill on a narrow single carriageway and following a cyclist who is travelling slowly and wobbling to maintain balance. What should you do?

Cevabı ve açıklamayı göster

Cevap: Hold back at a safe distance and only overtake when you have a clear view ahead, leaving at least 1.5 metres of clearance

Cevap

Hold back at a safe distance and only overtake when you have a clear view ahead, leaving at least 1.5 metres of clearance.
Cyclists travelling uphill move slowly and naturally wobble or adjust their line to maintain balance and momentum. Drivers must demonstrate patience by holding back until the road ahead offers a clear view, and only overtake when they can provide at least 1.5 metres of passing clearance.

Adım Adım Çözüm

1
Recognise the vulnerability and movement characteristics of the road user
Identify that cyclists riding slowly uphill often sway laterally to maintain balance and require extra room
Vulnerable road users on inclines need patience and significantly wider safety margins from following traffic
2
Evaluate road conditions, oncoming hazards, and visibility ahead
Determine whether the forward view is sufficient to safely complete an overtaking manoeuvre without sudden hazards
Overtaking on hills or narrow sections without full view of oncoming traffic creates extreme collision risks
3
Execute the passing manoeuvre only when completely safe, adhering to UK Highway Code clearance guidelines
Pass leaving at least 1.5 metres of space at appropriate speed once the road ahead is completely clear
Rule 163 of The Highway Code specifies leaving at least 1.5 metres when overtaking cyclists at speeds up to 30 mph

Anahtar Kavram

Consideration and safe passing clearances for vulnerable road users on inclines and narrow roads.
Tahmini Süre:1m 0s
Soru 502Soru →

You are preparing to reverse into a side road on your left. Which TWO actions should you take to carry out this manoeuvre safely?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Check all around the vehicle, including looking over both shoulders to cover blind spots, before moving; Give way to all oncoming traffic, cyclists, and pedestrians crossing the road

Cevap

Check all around the vehicle, including looking over both shoulders to cover blind spots, and give way to all oncoming traffic, cyclists, and pedestrians crossing the road.
Before and during any reversing manoeuvre, drivers must perform comprehensive all-round checks to cover blind spots that mirrors miss. Additionally, reversing traffic must yield priority to all other road users, including pedestrians crossing the road.

Adım Adım Çözüm

1
Carry out complete 360-degree observations including physical blind spots before moving.
Identifies approaching traffic, cyclists, or pedestrians that cannot be seen in mirrors.
The Highway Code requires all-round checks prior to reversing.
2
Yield right-of-way to all other road users throughout the reversing manoeuvre.
Ensures the manoeuvre does not impede or endanger other road users or pedestrians.
Reversing vehicles have the lowest priority and must yield at all times.

Anahtar Kavram

Highway Code Rules 201–203: Observation routines and priority rules when reversing into a junction
Tahmini Süre:45s
Soru 503Soru →

Opening a vehicle window to let in fresh air is an effective substitute for stopping and taking a rest break when feeling drowsy while driving.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. Fresh air from an open window does not eliminate driver fatigue; only stopping in a safe place to take a rest break can resolve drowsiness.
The statement is false because opening a window provides only brief sensory distraction and does not cure physiological tiredness. Under the Highway Code, drivers who feel drowsy must leave the road at a safe location, such as a motorway service area, and rest before proceeding.

Adım Adım Çözüm

1
Analyze the proposed fatigue management technique.
The statement suggests using an open window as a replacement for taking a physical rest break.
To evaluate whether environmental changes satisfy safety requirements for driver condition.
2
Apply Highway Code principles regarding driver tiredness and alertness.
The Highway Code explicitly states that measures like opening a window or turning up the radio provide only temporary relief and cannot prevent sleep onset.
To determine the accuracy and truth value of the statement.

Anahtar Kavram

Fatigue Management and Rest Requirements
Tahmini Süre:45s
Soru 504Soru →

Under emergency braking conditions on a slippery surface, an Anti-lock Braking System (ABS) rapidly modulates braking force to prevent the road wheels from locking. In which sequential order does the system execute this automatic cycle?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with wheel speed sensors detecting imminent wheel lockup, followed by the electronic control unit commanding the hydraulic modulator to reduce brake line pressure, allowing the wheel to regain rotational grip, and finishing with the modulator reapplying hydraulic pressure to maintain stopping power.
An Anti-lock Braking System (ABS) works as a closed feedback loop. First, magnetic or optical wheel speed sensors detect that a wheel is rapidly slowing down and about to stop turning entirely (wheel lock). Second, the ABS electronic control unit (ECU) directs solenoid valves inside the hydraulic modulator to reduce hydraulic fluid pressure to that specific brake. Third, this momentary release allows the tyre to roll freely again, restoring traction and directional control. Fourth, the system's electric pump and valves reapply hydraulic brake pressure to continue slowing down the car. This four-stage sequence repeats multiple times per second until the vehicle stops or footbrake pressure is released.

Adım Adım Çözüm

1
Identify the initial detection trigger in the ABS system.
Wheel speed sensors continuously monitor wheel rotation and signal when a wheel is decelerating too quickly toward a lockup.
The system cannot intervene until electronic sensors register that wheel rotational speed has dropped significantly below overall vehicle speed.
2
Determine the initial hydraulic reaction to imminent lockup.
The ABS control unit commands the hydraulic modulator to release brake fluid pressure on the slipping wheel.
Lowering hydraulic pressure relieves the clamping force of the brake caliper, allowing the locked wheel to break free.
3
Identify the physical result of pressure reduction on vehicle dynamics.
The wheel speeds up to match road speed and regains rolling traction.
A rolling tyre generates lateral cornering forces, enabling the driver to retain steering control while slowing down.
4
Determine the concluding action of the cycle.
The hydraulic modulator pulses pressure back into the brake caliper to resume deceleration.
Pressure must be restored to continue slowing the vehicle down effectively; this complete cycle repeats up to 15 times per second.

Anahtar Kavram

Anti-lock Braking System (ABS) electronic-hydraulic modulation cycle
Tahmini Süre:1m 0s
Soru 505Soru →

During your continuous visual scan, you spot an acute hazard, such as a pedestrian unexpectedly stepping into the road. Is it true that the safest anticipation technique is to maintain an unbroken visual fixation on that pedestrian until you have safely passed them, ensuring you can react instantly to their movements?

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false because maintaining an unbroken visual fixation on a single object prevents continuous scanning. This 'target fixation' is dangerous as it blinds you to secondary hazards, such as the vehicle ahead braking, and stops you from checking your mirrors to assess the situation behind you. You must keep your eyes moving to maintain full situational awareness.

Adım Adım Çözüm

1
Analyze the proposed action in the scenario.
The statement suggests maintaining an 'unbroken visual fixation' on a single acute hazard until it is passed.
To evaluate if this specific action aligns with safe driving principles regarding continuous scanning.
2
Evaluate the consequences of visual fixation in a dynamic driving environment.
Staring at one object (target fixation) eliminates peripheral awareness and prevents the driver from updating their mental model of the surrounding traffic, mirrors, and the road ahead.
Understanding the physiological and cognitive effects of interrupting a visual scan.
3
Apply the core principle of continuous scanning.
The core principle dictates that the eyes must constantly move to build a complete picture. Therefore, even when a severe hazard is identified, the scan must continue to monitor for secondary threats or changing conditions.
To determine the true or false nature of the statement based on official hazard perception theory.

Anahtar Kavram

Avoiding target fixation and maintaining a continuous visual sweep even when an acute hazard is present.
Soru 506Soru →

You are approaching a signal-controlled crossroads marked with a yellow criss-cross box junction. You intend to turn right and your exit road is clear, but oncoming traffic is preventing you from completing the turn immediately. What should you do?

Cevabı ve açıklamayı göster

Cevap: Enter the box junction and wait until there is a safe gap in oncoming traffic before completing the turn

Cevap

Enter the box junction and wait until there is a safe gap in oncoming traffic before completing the turn.
According to the Highway Code (Rule 174), drivers are allowed to enter a yellow box junction and wait when turning right, provided their exit road is clear and they are only prevented from turning by oncoming traffic. You must wait patiently for a safe gap in oncoming traffic before completing the turn.

Adım Adım Çözüm

1
Check the exit road of the turn to ensure it is clear of obstructions and identify the oncoming traffic stream.
Confirms eligibility for the box junction right-turn exception under Highway Code Rule 174.
You are legally permitted to enter a yellow box junction if you want to turn right and are only held up by oncoming traffic or other right-turning vehicles.
2
Move forward into the box, wait safely for oncoming vehicles and cyclists to pass, and complete the turn when clear.
Safely negotiates the junction without obstructing following traffic or violating right-of-way rules.
Waiting inside the box allows you to turn smoothly as soon as a safe gap appears without demanding priority or endangering other road users.

Anahtar Kavram

Highway Code Rule 174 right-turn exception for yellow box junctions and yielding to oncoming traffic.
Tahmini Süre:1m 0s
Soru 507Soru →

Different physical, electronic, and marking systems serve distinct roles in protecting a motor vehicle from unauthorised entry, theft, or component cloning under UK security guidelines. Match each vehicle security device with its specific functional role in anti-theft protection. Which primary anti-theft function correctly pairs with each listed vehicle security device?

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Electronic engine immobiliser
Steering wheel lock
Window etching (VIN)
GPS tracking system

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Electronic engine immobiliser matches with preventing the vehicle engine from starting without a verified transponder code; Steering wheel lock matches with providing a prominent mechanical obstruction; Window etching (VIN) matches with permanently marking glass components to deter cloning and part resale; GPS tracking system matches with transmitting real-time location telemetry for recovery.
Each security measure operates at a different phase of vehicle protection: immobilisers electronically prevent unauthorised engine ignition, steering wheel locks provide a physical mechanical barrier and visual deterrent, VIN etching marks components to deter cloning and illicit parts trading, and tracking devices facilitate post-theft recovery by relaying coordinates to authorities.

Adım Adım Çözüm

1
Identify the operational mechanism of an electronic engine immobiliser.
Recognised that it disables the ignition/fuel system electronically until a transponder handshake succeeds.
Immobilisers operate electronically at the ignition management level rather than acting as visible mechanical deterrents.
2
Identify the primary function of a steering wheel lock.
Recognised that it is a physical and visual deterrent preventing mechanical rotation of the steering column.
Physical locks serve as an immediate visual warning to opportunists that the vehicle cannot be easily steered away.
3
Determine the role of Vehicle Identification Number (VIN) window etching.
Recognised that indelible markings on glass identify stolen property and deter vehicle identity alteration (cloning).
Etching alters the component permanently, rendering stolen glass panels and vehicles traceable and commercially worthless to thieves.
4
Determine the role of a GPS tracking system.
Recognised that it provides post-theft tracking capabilities rather than pre-theft starting prevention.
Trackers communicate location coordinates to monitoring services and police after unauthorised movement.

Anahtar Kavram

Differentiation between preventative electronic security, mechanical deterrents, identification marking, and post-theft recovery devices in vehicle security.
Tahmini Süre:1m 30s
Soru 508Soru →

You have parked your car and need to leave it unattended for a short period. Which action should you take to keep your vehicle secure?

Cevabı ve açıklamayı göster

Cevap: Remove the ignition key and lock all doors and windows

Cevap

Remove the ignition key and lock all doors and windows
Whenever you leave your vehicle unattended, even for a short time, you must switch off the engine, remove the ignition key, and ensure all doors and windows are securely locked. This prevents opportunistic theft and complies with Highway Code requirements.

Adım Adım Çözüm

1
Identify the basic legal and practical security measures required when parking and leaving a vehicle.
Recognise that an unattended vehicle must be completely secured with the engine switched off and keys removed.
Securing all entry points and removing the keys prevents opportunistic drive-away theft.
2
Evaluate the safest action from the available options.
Selecting the option to remove the key and lock all doors and windows.
This complies with the Highway Code rules on vehicle security and unattended vehicles.

Anahtar Kavram

Basic vehicle security practices and preventing vehicle theft when leaving a car unattended
Tahmini Süre:35s
Soru 509Soru →

You are driving along an urban road with stationary traffic queued in the opposing lane and vehicles parked along your left-hand side. Ahead, an oncoming driver in the queue flashes their headlights near an unmarked side junction. What should you do to maintain safety?

Cevabı ve açıklamayı göster

Cevap: Scan the gap actively, reduce your speed, and anticipate that pedestrians, cyclists, or emerging vehicles may cross through the queue.

Cevap

Scan the gap actively, reduce your speed, and anticipate that pedestrians, cyclists, or emerging vehicles may cross through the queue.
When a driver flashes their headlights near a junction or gap in traffic, they are often attempting to let another road user turn across or cross the carriageway. Because stationary queues create significant blind spots, defensive drivers must scan actively, slow down, and prepare to stop for emerging vehicles, cyclists, or pedestrians who may move into their path.

Adım Adım Çözüm

1
Assess the situation and recognise the risks created by the headlight signal and the traffic gap.
Identify that another road user may attempt to cross through the blind gap in the stationary opposing traffic.
Rule 111 of The Highway Code states that flashing headlights only serve to alert other road users of a vehicle's presence, not to give priority or signal safety.
2
Adjust vehicle speed and adopt an active, wide visual scanning pattern across the gap, side road, and parked vehicles.
Create sufficient time and stopping distance to respond to any hidden hazards.
Early observation and anticipation prevent sudden braking and allow a safe response to emerging vulnerable road users or vehicles.

Anahtar Kavram

Defensive observation, anticipation of hidden hazards, and correct interpretation of headlight signals
Tahmini Süre:1m 0s
Soru 510Soru →

On a multi-lane circulatory carriageway of a large roundabout, you realise too late that you are in a lane dedicated exclusively to an exit you do not want to take. Traffic is moving alongside you in the adjacent lane. What is the safest course of action?

Cevabı ve açıklamayı göster

Cevap: Follow the lane off the roundabout at that exit and find a safe place to turn around or reroute

Cevap

Follow the lane off the roundabout at that exit and find a safe place to turn around or reroute
Under The Highway Code (Rules 186 and 187), drivers must follow lane markings and maintain lane discipline. When caught in a lane dedicated to an unintended exit with adjacent traffic, attempting to force a lane change or stopping is extremely dangerous. The correct, safe procedure is to follow the lane off the roundabout and find a safe, legal place to reroute.

Adım Adım Çözüm

1
Identify your position relative to road markings and adjacent traffic.
You are committed to an exit-only lane with active traffic directly beside you.
Recognising the lane constraints prevents panic steering and sudden erratic manoeuvres.
2
Evaluate the risk of sudden lane changes or stopping.
Attempting to cut across lanes or stopping on the circulatory carriageway introduces severe collision hazards.
Highway Code Rules 186 and 187 require drivers to stay in their lane and maintain a predictable course.
3
Maintain lane discipline and exit safely to replan your route.
The roundabout is cleared without endangering other road users, allowing a safe turnaround further ahead.
Taking the unintended exit and finding a legal place to turn around is the standard defensive driving response.

Anahtar Kavram

Lane discipline and dealing with navigational errors on multi-lane roundabouts
Tahmini Süre:1m 0s
Soru 511Soru →

You are driving through an urban area near a primary school during morning arrival hours and see a school crossing patrol warden preparing to assist pedestrians at the roadside. What is the correct sequence of driver actions you must take from initial approach to moving off?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

1. Check mirrors and ease off accelerator to decelerate smoothly; 2. Stop completely when the patrol warden displays the 'STOP' sign; 3. Apply the parking brake and wait patiently without creeping forward; 4. Check mirrors and blind spots, proceeding only when the sign is lowered and the carriageway is clear.
The correct sequence begins with proactive mirror checks and early speed reduction, followed by a full stop when the school crossing patrol displays the 'STOP' sign. The driver must then secure the vehicle with the parking brake while children cross, and perform full mirror and blind-spot checks before moving off once the sign is lowered and the road is entirely clear.

Adım Adım Çözüm

1
Check rear-view and exterior mirrors, then ease off the accelerator to reduce road speed in advance.
The vehicle slows down predictably and safely without surprising following traffic.
Early awareness and gradual speed reduction are essential for maintaining safety around school zones.
2
Bring the vehicle to a full stop short of the crossing point as the warden enters the carriageway with the sign raised.
The vehicle is stationary and positioned safely behind the crossing line.
Complying with the school crossing patrol's signal is a strict legal requirement under UK road traffic law.
3
Apply the handbrake / parking brake and keep the vehicle stationary without revving the engine.
The vehicle remains firmly held in place while pedestrians cross.
Applying the parking brake prevents roll-back or accidental forward movement and avoids startling vulnerable road users.
4
Perform 360-degree observation including mirrors and blind spots before driving off once the sign is lowered.
The vehicle resumes driving safely only when the crossing area is completely vacated.
Children can be unpredictable; ensuring the entire carriageway and warden have returned to the footway guarantees safety.

Anahtar Kavram

Driver duties and procedural sequence at a School Crossing Patrol
Tahmini Süre:1m 0s
Soru 512Soru →

You are waiting at a signal-controlled crossroads and intend to turn right. The traffic lights show a full green light, but there is no right-turn filter arrow. Oncoming traffic is approaching. What should you do?

Cevabı ve açıklamayı göster

Cevap: Move forward into the junction and wait until there is a safe gap in oncoming traffic before completing the turn

Cevap

Move forward into the junction and wait until there is a safe gap in oncoming traffic before completing the turn
When a full green traffic light is showing, you may proceed across the stop line into the junction. If you are turning right and there is oncoming traffic, you should wait in the junction until there is a safe gap before completing your turn.

Adım Adım Çözüm

1
Identify the signal aspect and junction layout
The main green signal is illuminated, which grants legal permission to cross the stop line and enter the junction.
According to UK traffic light rules, a full green light allows drivers to proceed if the way is clear.
2
Assess priority and opposing traffic flow
Oncoming traffic proceeding straight ahead or turning left has priority over vehicles turning right across their path.
Vehicles turning right must give way to approaching traffic unless protected by a dedicated green arrow.
3
Execute correct vehicle positioning and manoeuvre
Drive past the stop line into the center of the junction and wait safely until an appropriate gap appears to complete the turn.
This positions the car ready to turn without blocking the lane behind and allows safe progress once oncoming vehicles clear.

Anahtar Kavram

Priority and driver positioning when turning right at a green traffic light signal without a filter arrow
Tahmini Süre:45s
Soru 513Soru →

Drivers are legally required to maintain their vehicle in a roadworthy condition by performing regular daily and pre-journey inspections. Match each vehicle safety check with its correct DVSA-approved test procedure and pass standard.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Power-assisted steering (PAS) operation check
Hydraulic brake fluid reservoir check
Shock absorber (suspension damper) condition check
Exterior brake lights check without an assistant

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Power-assisted steering matches with applying gentle pressure while starting the engine; brake fluid reservoir matches with visual inspection between MIN and MAX marks on level ground; shock absorber condition matches with pushing down over the wheel arch to check for immediate settling; exterior brake lights match with checking reflections against a wall or garage door.
Each routine check requires a specific DVSA-prescribed procedure: power steering is verified by feeling the wheel lighten upon engine ignition; brake fluid is checked visually against translucent MAX and MIN markings on level ground; shock absorbers are tested by checking that the vehicle settles immediately after being pushed down over each wheel arch; and brake lights are checked solo using reflections from nearby vertical surfaces.

Adım Adım Çözüm

1
Identify the testing mechanism for power-assisted steering
Corresponds to applying turning pressure on the wheel while starting the engine to feel hydraulic or electric assistance engage
The power steering pump/motor only provides assistance once the engine runs; checking for immediate lightening confirms system operation before moving off.
2
Identify the inspection protocol for the hydraulic brake fluid reservoir
Corresponds to checking the translucent container between MIN and MAX markings on level ground
Brake fluid is hygroscopic and sealed; checking external fill lines prevents moisture contamination while confirming hydraulic integrity.
3
Identify the physical check for suspension damping efficiency
Corresponds to the bounce test: pushing down firmly on each wheel arch and verifying immediate settling
Functional shock absorbers suppress spring rebound immediately; excessive bouncing indicates worn dampers or hydraulic fluid leaks.
4
Identify the solo verification method for rear brake lighting
Corresponds to pressing the brake pedal while viewing reflections in a flat wall, garage door, or reflective window
Brake lamps only illuminate under pedal pressure; reflection observation allows a single driver to verify all stop lamps without an assistant.

Anahtar Kavram

DVSA Routine Vehicle Maintenance and Pre-Journey Safety Verification Procedures
Tahmini Süre:2m 0s
Soru 514Soru →

To obtain the most accurate pressure reading, when should you check your vehicle's tyres?

Cevabı ve açıklamayı göster

Cevap: When the tyres are cold before starting a journey

Cevap

When the tyres are cold before starting a journey
Tyre pressures should be checked when the tyres are cold, prior to driving. As a vehicle travels, friction between the road and tyres creates heat, which causes the air inside to expand and shows an artificially high pressure reading on a gauge.

Adım Adım Çözüm

1
Identify the factor that causes tyre pressure readings to fluctuate.
Friction and heat generated during driving expand the air inside the tyre, raising the internal pressure.
Manufacturer pressure specifications are calibrated for ambient temperature before heat builds up.
2
Determine the required condition for accurate tyre pressure measurement.
Tyre pressures must be checked when cold before any significant driving occurs.
Checking when cold avoids falsely elevated pressure readings and ensures correct inflation.

Anahtar Kavram

Tyre pressure inspection under cold conditions
Tahmini Süre:40s
Soru 515Soru →

A motorist travelling at 45 mph45\text{ mph} on a rain-soaked carriageway will experience a greater thinking distance than when travelling at 45 mph45\text{ mph} on a dry road, assuming their alertness and reaction time remain unchanged.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
Thinking distance is the distance a vehicle travels during the driver's reaction time—the interval between identifying a hazard and physically applying the footbrake. It is calculated solely as the product of travelling speed and driver reaction time. Because the vehicle's speed (45 mph45\text{ mph}) and the driver's reaction time are identical on both roads, the thinking distance does not change. Rain and standing water reduce tyre-to-road friction, which doubles the braking distance, but have no mechanical impact on thinking distance.

Adım Adım Çözüm

1
Recall the definition and formula for thinking distance in vehicle stopping dynamics.
Thinking distance is the distance travelled from the moment a hazard is perceived until the brakes are applied (dthinking=speed×reaction timed_{\text{thinking}} = \text{speed} \times \text{reaction time}).
Distinguishes the pre-braking human reaction phase from the post-braking mechanical deceleration phase.
2
Evaluate the variables given in the scenario.
The vehicle's speed (45 mph45\text{ mph}) and the driver's reaction time are identical in both wet and dry conditions.
Isolates whether any direct factor governing thinking distance has changed.
3
Determine the physical effect of the rain-soaked road surface.
Water on the road reduces tyre adhesion, which doubles braking distance, but has no physical effect on the distance covered before the driver presses the brake pedal.
Confirms that environmental surface conditions affect braking distance rather than thinking distance.

Anahtar Kavram

Thinking distance depends strictly on vehicle speed and driver reaction time; road surface conditions affect braking distance.
Tahmini Süre:1m 0s
Soru 516Soru →

You are driving along an urban road and intend to turn right into a side road. In which order should you carry out the observation and routine steps before making the turn?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

Check the interior rear-view mirror, check the right exterior door mirror, signal right in good time, and finally check ahead for oncoming traffic and crossing pedestrians.
Under the standard DVSA Mirrors–Signal–Manoeuvre (MSM) routine, observation always precedes signalling and action. The driver first checks the interior mirror to assess following traffic, then checks the right exterior door mirror to verify the offside is clear. Once confirmed safe, the right indicator is activated. Finally, before turning, the driver makes final pre-manoeuvre observations of oncoming traffic and the junction entrance for pedestrians.

Adım Adım Çözüm

1
Check the interior rear-view mirror
Driver establishes situational awareness of following vehicles
The Mirrors-Signal-Manoeuvre (MSM) routine always starts with interior mirror observation to determine how actions may affect traffic behind.
2
Check the right exterior door mirror
Driver confirms no overtaking vehicles, motorcyclists, or cyclists are present on the offside
Specific side-mirror observations confirm the side into which the vehicle will position and turn is completely clear.
3
Apply the right-turn direction indicator
Clear and timely warning is given to surrounding road users
Signalling must only be applied after checking mirrors to ensure the signal does not mislead or conflict with road users already executing a manoeuvre.
4
Observe oncoming traffic and scan the mouth of the target side road
Confirmation that the turning path is clear of oncoming vehicles and pedestrians
The final pre-manoeuvre check ensures that no late-arriving hazards (such as crossing pedestrians or oncoming vehicles) prevent a safe turn.

Anahtar Kavram

The Mirrors–Signal–Manoeuvre (MSM) routine and pre-manoeuvre observation sequence before turning right.
Tahmini Süre:45s
Soru 517Soru →

While driving on an open road, you apply a systematic visual scanning routine to anticipate potential hazards. In which order should you carry out the following actions to effectively scan and manage emerging hazards?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with scanning far ahead to identify distant cues, followed by scanning the middle distance and road edges for developing hazards, checking mirrors to assess surrounding traffic, and finally adjusting vehicle speed and position smoothly.
An effective visual scanning routine moves progressively from the furthest distance inward: observing far ahead to spot early clues, scanning the middle distance for emerging hazards, checking mirrors to assess following traffic, and then smoothly adjusting speed and position.

Adım Adım Çözüm

1
Look as far ahead down the road as visibility allows.
Early identification of road layout changes, brake lights, and warning signs.
Scanning the horizon gives you maximum time to anticipate upcoming conditions.
2
Scan the middle ground and roadside areas.
Early detection of emerging hazards like pedestrians, cyclists, or side junctions.
Mid-range scanning detects potential hazards that may cross or enter your path.
3
Check your interior and exterior mirrors.
Clear awareness of following and adjacent traffic.
You must understand the situation behind your vehicle before making any adjustments.
4
Adjust your vehicle's speed and road position in good time.
Safe, controlled navigation of the hazard without harsh braking or erratic maneuvers.
Smooth physical adjustments prevent panic reactions and protect road users.

Anahtar Kavram

Defensive visual scanning hierarchy and hazard anticipation cycle
Tahmini Süre:45s
Soru 518Soru →

You have slowed down and stopped at a zebra crossing to allow a pedestrian to cross. Why should you avoid flashing your headlights or waving your hand to invite them across?

Cevabı ve açıklamayı göster

Cevap: Another vehicle approaching or overtaking may not have seen them and could put them in danger

Cevap

Another road user, such as an overtaking vehicle or cyclist, might not see the pedestrian and could collide with them.
You must never wave or flash your headlights to invite pedestrians to cross. Doing so can cause them to step into the road without checking for other hazards, placing them directly in the path of approaching or overtaking vehicles and cyclists who may not have seen them.

Adım Adım Çözüm

1
Identify the relevant guidance in The Highway Code regarding signalling to pedestrians.
The Highway Code states that drivers should never wave people across or flash headlights to invite them to cross.
Drivers cannot control the view, speed, or actions of other approaching road users.
2
Assess the potential hazard caused by giving an encouraging signal.
The pedestrian may trust the driver's signal and step into the roadway without checking for overtaking or oncoming traffic.
Pedestrians must make their own independent decision to cross when they judge it is completely safe.

Anahtar Kavram

Improper use of vehicle signals to direct or invite other road users
Tahmini Süre:45s
Soru 519Soru →

Your car is carrying bulky luggage that completely obstructs the view through your interior rear-view mirror. Before you signal and carry out any manoeuvre, what must you do to ensure it is safe to proceed?

Cevabı ve açıklamayı göster

Cevap: Thoroughly check both exterior door mirrors and look around to cover vehicle blind spots

Cevap

Thoroughly check both exterior door mirrors and look around to cover vehicle blind spots
When the interior rear-view mirror is obscured by passengers or cargo, the driver must compensate by checking both exterior wing mirrors and physically looking over their shoulders to check blind spots before applying signals or moving the vehicle.

Adım Adım Çözüm

1
Identify the observation limitations caused by the obstructed interior mirror.
Recognise that direct rearward vision through the central mirror is unavailable.
An obstructed rear window enlarges the unmonitored zone directly behind the car.
2
Adapt the pre-manoeuvre observation routine using exterior mirrors and direct head turns.
All peripheral areas and blind spots not covered by the side mirrors are checked.
The Highway Code requires all-round observation and blind spot verification before signalling and carrying out any manoeuvre.

Anahtar Kavram

Pre-manoeuvre observation and blind spot management when rear visibility is obstructed
Soru 520Soru →

You have parked forward into a 90-degree parking bay between two high-sided delivery vans in a busy supermarket car park. As you prepare to drive forward out into the traffic aisle, which TWO observation checks are essential to ensure it is safe to proceed?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Look through your side windows and lean forward to check blind spots obscured by the adjacent vehicles; Scan the immediate area all around for pedestrians, especially children walking between parked vehicles

Cevap

Checking through the side windows while leaning forward to see past the adjacent vans, and scanning all around for pedestrians and children entering the aisle.
When emerging from between high-sided vehicles, standard mirror checks alone are insufficient because your view to the sides is severely restricted. Drivers must lean forward and look directly through side windows to clear blind spots, while scanning comprehensively for pedestrians and other road users who may suddenly step into the aisle.

Adım Adım Çözüm

1
Assess the visual restrictions created by adjacent tall vehicles.
Identified significant blind zones to both the left and right aisle approaches.
High-sided vans obstruct normal peripheral view from the driver's seating position.
2
Perform physical observation checks beyond what mirrors can reveal.
Comprehensive view of cross-traffic and moving pedestrians in the aisle.
Leaning forward to look through side windows and scanning all around ensures vulnerable users and oncoming vehicles are seen before pulling out.

Anahtar Kavram

Pre-Manoeuvre Observation in Restricted Visibility Car Parks
Tahmini Süre:1m 0s
ÖncekiSayfa 26 / 95Sonraki
Tüm alıştırma soruları — UK Driving Theory Test | Examkin