Examkin

Tüm alıştırma soruları

962 soru

Tüm türler1,884Çoktan seçmeli962Çoklu seçim84Doğru / Yanlış379Sayısal32Eşleştirme249Sıralama178
Soru 1Soru →

While approaching a sharp bend on a rural road, a driver depresses the clutch pedal and holds it down throughout the turn. What is the primary hazard associated with this driving habit?

Cevabı ve açıklamayı göster

Cevap: It removes engine braking resistance, reducing tyre grip balance and making steering control less predictable.

Cevap

It removes engine braking resistance, reducing tyre grip balance and making steering control less predictable.
Keeping the clutch pedal depressed (coasting) disconnects the engine from the transmission. This removes the steadying drag of engine braking, placing the entire burden of speed control on the footbrake, shifting tyre grip away from steering, and making the vehicle far less stable and responsive through a corner.

Adım Adım Çözüm

1
Analyse the physical state of the vehicle when coasting into a bend.
Holding the clutch down disconnects the engine from the driven wheels, eliminating engine braking resistance.
Engine braking naturally helps regulate forward momentum and maintain balanced weight distribution over all four tyres.
2
Evaluate the effect of disengaged drivetrain on steering and cornering dynamics.
Without engine drag, the vehicle tends to carry more momentum into the turn, requiring heavier footbrake usage and reducing the lateral grip available for steering.
Tyres have a finite amount of adhesion shared between braking and cornering forces.
3
Determine the resulting hazard to safe vehicle control.
Steering responsiveness becomes less predictable and the vehicle is significantly harder to stabilise if road grip changes.
Maintaining the correct gear before entering the bend ensures optimal stability, precise steering feel, and immediate throttle responsiveness.

Anahtar Kavram

Impact of Coasting on Steering and Vehicle Stability
Tahmini Süre:1m 30s
Soru 2Soru →

You are driving along a two-way road and come across a stationary refuse collection vehicle blocking your side of the carriageway. Just ahead of the vehicle, the road curves into a sharp blind bend. What is the safest course of action to take?

Cevabı ve açıklamayı göster

Cevap: Hold back behind the stationary vehicle and wait until you have a completely clear view ahead before overtaking.

Cevap

Hold back behind the stationary vehicle and wait until you have a completely clear view ahead before overtaking.
When a stationary obstruction blocks your side of the carriageway immediately before a blind bend, your forward view is severely restricted. You must hold back behind the obstruction and only overtake when you can clearly see that the road ahead is clear and it is safe to do so.

Adım Adım Çözüm

1
Identify the static hazard on your side of the road and recognize that the blind bend severely restricts your forward view of oncoming traffic.
Awareness that overtaking immediately would mean driving into an opposing lane without knowing if it is clear.
Safe driving requires knowing that the path ahead is entirely clear before committing to an overtaking manoeuvre.
2
Drop back to a safe following position behind the stationary vehicle.
Your vehicle remains safely on the left while giving you a wider viewing angle around the obstruction.
Hanging back increases your field of vision and prevents blocking oncoming traffic if a vehicle appears around the bend.
3
Wait patiently until the view around the bend is clear and no oncoming traffic is approaching before moving out.
The obstruction is passed safely without creating a hazard for other road users.
Drivers must never overtake a stationary obstruction unless they are certain the manoeuvre can be completed safely.

Anahtar Kavram

Dealing safely with stationary obstructions and restricted forward visibility
Tahmini Süre:1m 0s
Soru 3Soru →

You are travelling at 70 mph in the left-hand lane of a motorway and plan to leave at the upcoming junction. At what point should you begin to reduce your speed?

Cevabı ve açıklamayı göster

Cevap: After you have moved onto the exit slip road (deceleration lane)

Cevap

You should begin to reduce your speed only after you have moved onto the exit slip road (deceleration lane).
According to Highway Code Rule 272, drivers should maintain their normal cruising speed on the main carriageway and only decelerate once they have entered the exit slip road. The slip road is specifically designed to give adequate distance for vehicles to slow down safely without creating a hazard for high-speed motorway traffic behind.

Adım Adım Çözüm

1
Position your vehicle in the left-hand lane well before the exit and signal left in good time.
You clearly communicate your intention to leave without disrupting the flow of traffic.
Highway Code Rule 272 requires drivers to move into the left-hand lane well before the exit junction.
2
Maintain normal cruising speed on the main carriageway past the countdown markers until filtering onto the slip road.
Vehicles following behind on the motorway are not forced to brake abruptly.
Braking on a high-speed live lane creates a severe collision risk and causes traffic flow disruption.
3
Apply the brakes and adjust down to the lower speed limit once safely within the deceleration lane.
Your speed is reduced safely before reaching the junction roundabout or connecting road.
The slip road is designed specifically as a deceleration zone.

Anahtar Kavram

Motorway Exit Deceleration and Speed Management (Highway Code Rule 272)
Tahmini Süre:45s
Soru 4Soru →

You are driving along a level road covered in compacted snow and ice. Why should you drive at a slow speed in the highest practical gear?

Cevabı ve açıklamayı göster

Cevap: It reduces engine torque delivered to the driven wheels, helping to prevent wheelspin

Cevap

Driving in the highest practical gear reduces engine torque delivered to the driven wheels, helping to prevent wheelspin.
On ice and snow, tyre grip is minimal. Driving in the highest practical gear keeps engine revolutions low and dampens the torque delivered to the driving wheels. This smoother application of power helps prevent the wheels from spinning and losing traction.

Adım Adım Çözüm

1
Identify the primary vehicle handling challenge when driving on icy or snow-covered surfaces
Tyre grip is severely compromised, meaning excess power sent to the driven wheels will easily break traction and induce wheelspin.
Compact snow and ice provide minimal friction between the tyres and the road surface.
2
Evaluate the mechanical effect of gear selection on wheel torque
Higher gears provide lower engine torque multiplication at the wheels compared to low gears.
Lower wheel torque allows gentler power delivery, making it easier to keep the tyres within their limited grip threshold.

Anahtar Kavram

Using a higher gear at low speeds reduces torque at the driven wheels to avoid wheelspin on slippery surfaces.
Tahmini Süre:1m 0s
Soru 5Soru →

You are driving along a major trunk road in the early afternoon and notice that you are yawning frequently and struggling to concentrate on the traffic ahead. What should you do to safely manage this fatigue?

Cevabı ve açıklamayı göster

Cevap: Find a safe place to stop, drink two cups of caffeinated coffee, and take a short 15-minute nap.

Cevap

Find a safe place to stop, drink two cups of caffeinated coffee, and take a short 15-minute nap.
According to The Highway Code, the most effective way to counter sleepiness while on a journey is to pull over in a safe place, drink two cups of caffeinated coffee or an equivalent caffeinated drink, and take a short nap of about 15 minutes while the caffeine takes effect.

Adım Adım Çözüm

1
Identify the symptoms of driver fatigue
Recognise that frequent yawning and loss of concentration indicate dangerous levels of tiredness
Continuing to drive while drowsy significantly impairs reaction times and increases collision risk
2
Apply the official Highway Code countermeasure for driver sleepiness
Stop at a safe location, consume caffeinated beverages, and rest for approximately 15 minutes
A short nap combined with caffeine is the only effective short-term countermeasure to restore necessary alertness

Anahtar Kavram

Highway Code guidelines for managing driver sleepiness and fatigue
Tahmini Süre:45s
Soru 6Soru →

As you approach a bus that has pulled in at a roadside stop in a busy shopping area, which action should you take to safely manage potential pedestrian hazards?

Cevabı ve açıklamayı göster

Cevap: Reduce your speed and watch carefully for passengers stepping out from behind or in front of the vehicle to cross the road

Cevap

Reduce your speed and watch carefully for passengers stepping out from behind or in front of the vehicle to cross the road.
When passing a stationary bus at a bus stop, pedestrians who have just alighted often cross directly in front of or behind the vehicle where they are hidden from view. Reducing your speed and anticipating hidden pedestrians provides the time and braking distance necessary to stop safely if someone suddenly steps into the carriageway.

Adım Adım Çözüm

1
Identify the static hazard and recognise that the stationary bus creates a major visual blind spot.
Driver recognises that passengers leaving the bus may not be visible from the normal driving position.
Large vehicles mask footway activity and conceal pedestrians attempting to cross.
2
Ease off the accelerator, reduce vehicle speed, and cover the brake pedal.
Stopping distance is significantly shortened, allowing an immediate controlled stop if needed.
Pedestrians often step directly into the road without checking for approaching traffic.
3
Scan the kerb, underneath the vehicle body for pedestrian feet, and around both ends of the bus.
Early detection of any developing pedestrian movement across the carriageway.
Proactive observation enables safe passage without harsh braking or collisions.

Anahtar Kavram

Anticipating pedestrian movement and blind spots around stationary public service vehicles
Tahmini Süre:1m 0s
Soru 7Soru →

You are preparing to drive home after finishing a strenuous work shift, but you feel completely exhausted and are struggling to stay awake. What should you do before getting behind the wheel?

Cevabı ve açıklamayı göster

Cevap: Delay your journey until you have rested and had sufficient sleep

Cevap

Delay your journey until you have rested and had sufficient sleep
According to the Highway Code, you must never begin a journey if you are feeling tired or exhausted. The only safe action is to delay setting off until you have had adequate rest and sleep.

Adım Adım Çözüm

1
Assess driver fitness before starting the trip
Recognise that severe exhaustion impairs judgment, reaction times, and vehicle control
The Highway Code explicitly states that drivers must ensure they are fit to drive before embarking on any journey
2
Select the only safe and lawful course of action
Postpone driving until adequate sleep and rest have been obtained
Fatigue cannot be resolved by driving techniques or rushing; sleep is essential to restore alertness

Anahtar Kavram

Pre-journey fitness to drive and driver fatigue prevention
Tahmini Süre:40s
Soru 8Soru →

As you drive past a recreation ground, you notice an ice cream van parked at the kerb with several young children gathering around it. What is the safest and most effective way to manage the risks in this situation?

Cevabı ve açıklamayı göster

Cevap: Slow down considerably, look for movement underneath and between parked vehicles, and be ready to stop at short notice.

Cevap

Slow down considerably, look for movement underneath and between parked vehicles, and be ready to stop at short notice.
Children near ice cream vans, school gates, and play parks are particularly vulnerable because excitement and distraction impair their attention to road traffic. The safe course of action according to the Highway Code is to significantly reduce speed, scan actively beneath vehicles to spot early signs of pedestrian presence, and maintain preparedness to stop immediately.

Adım Adım Çözüm

1
Identify the vulnerable road users and environmental obstructions.
Recognised that children near an ice cream van are highly excited, easily distracted, and frequently masked by the vehicle bodywork.
Children often lack mature hazard awareness and may dash across the carriageway without checking for traffic.
2
Implement proactive defensive driving and scanning techniques.
Reduced vehicle speed, covered the brake pedal, and scanned low under chassis lines and between parked vehicles for feet or shadows.
Looking low through wheels and underneath vehicles reveals approaching pedestrians before their upper bodies emerge from behind blind spots.

Anahtar Kavram

Child pedestrian hazard anticipation and defensive speed adjustment near high-risk stationary vehicles.
Tahmini Süre:1m 0s
Soru 9Soru →

During a heavy rain shower, a driver notices that their vehicle takes significantly longer to come to a halt after the brakes are applied. What vehicle or environmental factor is responsible for increasing the braking distance in this situation?

Cevabı ve açıklamayı göster

Cevap: Severely worn tyre tread reducing the tyres' ability to disperse surface water

Cevap

Severely worn tyre tread reducing the tyres' ability to disperse surface water
Braking distance is the distance a vehicle travels from the moment the brakes are applied until it comes to a complete stop. On wet roads, tyres require adequate tread depth to channel water away from the road surface. Worn tyres dramatically reduce grip, extending the distance needed for the vehicle to stop.

Adım Adım Çözüm

1
Distinguish between thinking distance and braking distance components of stopping distance.
Thinking distance depends strictly on driver reaction time (e.g., fatigue, alcohol, distractions), whereas braking distance depends on vehicle condition and road grip.
The question specifically asks about the factor responsible for increasing the distance travelled after the brakes are pressed.
2
Evaluate the effect of tyre condition on wet road friction.
Tyre tread grooves channel water away from the contact patch; worn tread leads to aquaplaning and reduced friction against the wet road surface.
Reduced friction directly degrades deceleration capability, resulting in a significantly longer braking distance.

Anahtar Kavram

Factors specifically affecting braking distance include vehicle condition (tyres, brakes, suspension, weight) and road surface conditions (wet, icy, loose gravel), as opposed to driver-related thinking factors.
Tahmini Süre:1m 0s
Soru 10Soru →

While navigating a narrow country road, you catch up with two horse riders travelling side by side towards a blind brow. The rider on the outside signals with an outstretched right arm moving slowly up and down. What is the safest and most appropriate action to take?

Cevabı ve açıklamayı göster

Cevap: Hold back at a safe distance, keep your speed under 10 mph without revving the engine, and wait to pass until visibility clears beyond the brow.

Cevap

Hold back at a safe distance, keep your speed under 10 mph without revving the engine, and wait to pass until visibility clears beyond the brow.
Under Highway Code Rule 215, drivers must pass horse riders slowly at 10 mph or less, leave at least 2 metres of clearance, and keep engine noise to a minimum. When riders are riding side by side (which is permissible, especially to protect novice riders or nervous horses) or when approaching a hazard such as a blind brow, drivers must hold back patiently and not attempt an overtake until it is safe.

Adım Adım Çözüm

1
Interpret the hazard and the rider's physical signal.
Recognise that the rider's arm moving up and down means you must slow down, and that riding two abreast is often done to protect a less experienced horse or rider.
Horse riders use standard hand signals to communicate safety requirements to approaching drivers.
2
Assess the road geometry ahead.
Identify that an overtake cannot be safely completed before a blind brow due to zero oncoming visibility.
Passing on a blind summit risks a head-on collision with oncoming vehicles.
3
Apply Highway Code Rule 215 guidelines for passing horses.
Keep speed below 10 mph, avoid revving the engine or sounding the horn, maintain ample following distance, and hold back until the road ahead is completely clear with at least 2 metres of passing space.
Horses are easily spooked by sudden movements and engine noise, requiring calm and patient driving.

Anahtar Kavram

Highway Code Rule 215: Safe speed, distance, and noise management when encountering horse riders and animals on rural roads.
Tahmini Süre:1m 30s
Soru 11Soru →

When planning a long road trip, how should you schedule rest stops to prevent fatigue and drive safely?

Cevabı ve açıklamayı göster

Cevap: Plan a rest break of at least 15 minutes after every two hours of driving

Cevap

Plan a rest break of at least 15 minutes after every two hours of driving.
According to Highway Code Rule 91, drivers should plan their journeys carefully and take a minimum break of at least 15 minutes after every two hours of driving. Regular breaks allow drivers to refresh, move around, and maintain the necessary level of alertness.

Adım Adım Çözüm

1
Identify the Highway Code guideline for journey planning and driver fatigue prevention.
Drivers are advised to plan regular rest stops during extended trips.
Fatigue significantly impairs reaction time, alertness, and hazard perception.
2
Apply the standard recommended rest interval to the journey schedule.
A minimum 15-minute break is required after every two hours of continuous driving.
Regular intervals of rest and fresh air help sustain driver concentration and prevent drowsiness.

Anahtar Kavram

Highway Code rest break guidelines for fatigue prevention during long journeys
Tahmini Süre:45s
Soru 12Soru →

How will driving with tyres that are significantly under-inflated affect your vehicle?

Cevabı ve açıklamayı göster

Cevap: Fuel consumption will increase and braking distance will be extended

Cevap

Fuel consumption will increase and braking distance will be extended.
When tyres are under-inflated, the increased flexing of the tyre casing creates higher rolling resistance, which increases vehicle fuel consumption. Additionally, the deformed contact patch reduces effective braking grip and directional stability, leading to longer braking distances and potentially uneven shoulder wear.

Adım Adım Çözüm

1
Evaluate the mechanical effect of low tyre pressure on rolling resistance and fuel economy.
Under-inflated tyres flex excessively and generate high rolling resistance, forcing the engine to work harder and consume more fuel.
Maintaining correct pressure minimizes drag and optimizes energy efficiency.
2
Evaluate the effect of low tyre pressure on tyre grip, stability, and stopping distance.
The contact patch becomes uneven with pressure concentrating on the shoulders, reducing optimal grip under heavy braking and lengthening stopping distances.
Correct inflation pressure is essential for even contact distribution and maximum braking performance.

Anahtar Kavram

Consequences of tyre under-inflation on vehicle efficiency and safety
Tahmini Süre:45s
Soru 13Soru →

You are driving along a residential street with cars parked on the left-hand side. A cyclist ahead moves out towards the centre of your lane to pass the parked vehicles. How should you respond?

Cevabı ve açıklamayı göster

Cevap: Stay behind and leave plenty of room for the cyclist to pass the parked vehicles safely

Cevap

Stay behind and leave plenty of room for the cyclist to pass the parked vehicles safely
Cyclists often ride further out into the road when passing parked cars to keep clear of opening doors and emerging pedestrians. Drivers should anticipate this movement, hold back patiently, and allow the cyclist sufficient room rather than trying to force an overtake.

Adım Adım Çözüm

1
Identify the static hazard presented by the line of parked cars
Recognise that parked cars can present sudden hazards such as opening doors or pedestrians emerging between vehicles
Cyclists must move out into the centre of the lane to avoid riding in the dangerous door zone of parked cars
2
Select the appropriate driving response to support the vulnerable road user
Hold back at a safe distance until the cyclist has safely cleared the parked vehicles and a safe overtaking opportunity arises
Patience and giving adequate clearance protect vulnerable road users from collision risks

Anahtar Kavram

Vulnerable Road Users - Cyclists and Parked Vehicle Hazards
Tahmini Süre:45s
Soru 14Soru →

While carrying out a routine inspection of your vehicle, you notice excessive tread wear concentrated along only the inside edge of one front tyre, while the rest of the tread pattern is worn evenly and remains well within legal limits. What is the most likely cause of this specific wear pattern?

Cevabı ve açıklamayı göster

Cevap: Incorrect front wheel alignment (tracking)

Cevap

Incorrect front wheel alignment (tracking) is the most likely cause of uneven wear along a single edge of a tyre.
Incorrect wheel alignment (tracking) or suspension defects cause the wheels to run out of true alignment with the vehicle's direction of travel. This drags the tyre sideways as it rolls, creating heavy friction and rapid wear along just one edge.

Adım Adım Çözüm

1
Analyze the observed tyre wear pattern from the inspection scenario.
The tyre exhibits isolated wear on one edge (the inner shoulder), while the rest of the tread shows normal, even depth.
Differentiating between symmetrical and asymmetrical wear patterns helps isolate mechanical faults from tyre pressure issues.
2
Identify the vehicle fault associated with single-edge tyre scrubbing.
Steering misalignment or improper tracking causes the wheel to point slightly inward or outward relative to the straight-ahead position, constantly dragging one edge across the road.
Uneven single-edge wear points directly to tracking or suspension misalignment rather than inflation pressure anomalies.

Anahtar Kavram

Tyre wear diagnostics and wheel alignment (tracking)
Tahmini Süre:1m 0s
Soru 15Soru →

Driving through a busy town centre, you observe exhaust fumes rising from the tailpipe of a parked car ahead whose front wheels are angled outwards towards your lane. What hazard should you anticipate?

Cevabı ve açıklamayı göster

Cevap: The vehicle is preparing to pull out into your lane of traffic

Cevap

You should anticipate that the parked vehicle is preparing to move off from the kerb into your lane of traffic.
Recognising early clues such as exhaust smoke (showing the engine is running) and wheels turned outward towards the carriageway allows you to anticipate that the vehicle is about to pull away from the kerb. Anticipating this early gives you time to check your mirrors, reduce your speed, and prepare to stop if necessary.

Adım Adım Çözüm

1
Identify visual cues from stationary vehicles ahead
Exhaust smoke indicates the engine is running, and angled front wheels show intended steering direction into the road
Early detection of subtle hazard indicators gives you more time to react appropriately
2
Evaluate potential vehicle movements and driver limitations
Recognise that the vehicle may pull out suddenly, potentially without the driver checking their blind spot
Defensive driving requires anticipating potential conflicts before they physically develop into emergencies
3
Formulate a proactive driving response
Check mirrors, ease off the accelerator to reduce speed, and create a safe safety cushion
Adjusting speed and position early prevents the need for sudden, harsh braking

Anahtar Kavram

Identifying early visual cues of developing hazards from stationary vehicles
Tahmini Süre:45s
Soru 16Soru →

You are driving along a busy urban street with a line of parked vehicles on your left. You spot a pedestrian carrying a white stick with red bands standing between two parked cars, appearing ready to cross. Simultaneously, you are aware of a cyclist riding closely behind you. As the pedestrian begins to step onto the carriageway, which of the following represents the safest and most appropriate hazard management strategy?

Cevabı ve açıklamayı göster

Cevap: Gradually reduce your speed while checking your mirrors and blind spots for the cyclist, and stop safely to allow the pedestrian ample time to cross.

Cevap

Gradually reduce your speed while checking your mirrors and blind spots for the cyclist, and stop safely to allow the pedestrian ample time to cross.
The correct response effectively manages multiple concurrent hazards. It recognizes that a white stick with red bands signifies a deafblind pedestrian who needs extra time and cannot detect vehicles. By gradually reducing speed and checking mirrors and blind spots, the driver protects the pedestrian while preventing a rear-end collision with the following cyclist.

Adım Adım Çözüm

1
Identify the vulnerable road user's specific needs.
Recognize that a white stick with red bands indicates the pedestrian is deafblind.
This means the pedestrian cannot see or hear the approaching vehicle, requiring maximum driver anticipation and patience.
2
Assess the surrounding hazards, including the static and moving elements.
Note the parked cars restricting visibility and the cyclist closely following behind.
Parked cars are static hazards that can hide pedestrians, and abrupt braking could cause the following cyclist to crash into the rear of your vehicle.
3
Execute a coordinated and safe driving response.
Check mirrors and blind spots, then brake progressively to stop safely for the pedestrian.
This sequence ensures the safety of the deafblind pedestrian while actively preventing a collision with the vulnerable cyclist behind.

Anahtar Kavram

Managing multiple hazards when encountering deafblind pedestrians
Soru 17Soru →

You are driving in rainy weather on a dual carriageway and decide to overtake a slower vehicle ahead. What should you do to carry out this manoeuvre safely and courteously?

Cevabı ve açıklamayı göster

Cevap: Maintain an increased separation distance, check mirrors and blind spots, and move out only when a safe gap exists

Cevap

Maintain an increased separation distance, check mirrors and blind spots, and move out only when a safe gap exists
According to The Highway Code, stopping distances in wet conditions are at least double those on dry roads. When preparing to overtake, dropping back provides better forward vision past spray and allows sufficient time to build overtaking speed safely. Before changing lanes, checking both mirrors and the blind spot ensures the manoeuvre does not endanger faster vehicles approaching from behind.

Adım Adım Çözüm

1
Assess environmental conditions and adjust following distance
Separation distance behind the lead vehicle is doubled to at least four seconds to manage surface water and tyre spray.
Rain dramatically increases stopping distances and spray obscures forward vision if following too closely.
2
Perform full observational checks (MSPSL routine)
Interior and door mirrors are checked, followed by a shoulder check into the right-side blind spot.
Ensures no faster-moving traffic is already approaching or overtaking in the adjacent lane.
3
Signal intention and complete the overtake smoothly
Move into the overtaking lane safely, pass the vehicle, and return to the left lane when safely past.
Maintains predictable vehicle position and courtesy towards all road users without intimidation.

Anahtar Kavram

Safe following distances, thorough observation, and courteous behaviour when overtaking in adverse weather conditions.
Tahmini Süre:1m 0s
Soru 18Soru →

You are following a cyclist along an urban single carriageway. Ahead on the left, a refuse collection vehicle is stationary with workers moving around it, narrowing the carriageway. How should you anticipate the cyclist's behaviour and respond safely?

Cevabı ve açıklamayı göster

Cevap: Anticipate that the cyclist will steer out towards the centre of the road to avoid the obstruction, and drop back to give them space.

Cevap

Anticipate that the cyclist will need to move out towards the centre of the carriageway to pass the refuse vehicle, drop back, and allow them sufficient room.
Good hazard anticipation involves looking well ahead to spot potential bottlenecks. When a stationary vehicle obstructs the left side of the carriageway, cyclists will need to move out to maintain clearance from workers and obstacles. Dropping back and waiting patiently allows the cyclist to safely negotiate the hazard without being crowded.

Adım Adım Çözüm

1
Scan the road ahead beyond the vehicle directly in front to identify developing hazards.
Identified the stationary refuse vehicle and active workers narrowing the lane ahead.
Effective forward observation provides early warning of hazards before they force sudden manoeuvres.
2
Predict the necessary path of travel for the vulnerable road user.
Recognised that the cyclist must steer towards the centre of the carriageway to pass the stationary vehicle safely.
Cyclists need extra room to avoid hazards, door zones, and active roadside workers.
3
Adjust vehicle speed and drop back to establish a safe following distance.
Created adequate space for the cyclist to complete their manoeuvre without pressure.
Defensive driving requires giving vulnerable road users time and space rather than forcing an overtake in a constricted area.

Anahtar Kavram

Early hazard anticipation and scanning when following vulnerable road users approaching static road obstructions.
Tahmini Süre:1m 0s
Soru 19Soru →

You are approaching a zebra crossing that has white zig-zag road markings painted on both approaches. What action is strictly prohibited within the area covered by these zig-zag lines?

Cevabı ve açıklamayı göster

Cevap: Overtaking the moving vehicle nearest to the crossing or parking your vehicle

Cevap

Overtaking the moving vehicle nearest to the crossing or parking your vehicle is strictly prohibited within white zig-zag road markings.
Under UK Highway Code Rule 191, you must not park or wait on white zig-zag lines, nor overtake the moving vehicle nearest to the crossing or any vehicle that has stopped to give way to pedestrians.

Adım Adım Çözüm

1
Identify the specific road marking and its legal purpose.
The markings are white zig-zag lines located on the approaches to and exits from pedestrian crossings.
Zig-zag markings are installed to maintain a clear line of sight between approaching drivers and pedestrians waiting to cross.
2
Apply the statutory restrictions set out in UK Highway Code Rule 191.
Drivers must not park, wait, or overtake the leading vehicle within the zig-zag area.
Parking obscures waiting pedestrians from view, and overtaking near a crossing drastically elevates the risk of hitting a pedestrian who has stepped onto the road.

Anahtar Kavram

Highway Code restrictions on pedestrian crossing zig-zag markings
Tahmini Süre:45s
Soru 20Soru →

Due to safety regulations and high traffic speeds, certain vehicles and road users are prohibited from the motorway network. Which of the following is legally banned from driving on a motorway?

Cevabı ve açıklamayı göster

Cevap: An agricultural tractor

Cevap

An agricultural tractor is strictly prohibited from entering or using a motorway.
Under UK Highway Code Rule 253, agricultural vehicles such as tractors are strictly prohibited from using motorways due to the substantial hazard created by slow-moving machinery on high-speed roads.

Adım Adım Çözüm

1
Review the restrictions outlined in UK Highway Code Rule 253 regarding prohibited vehicles.
Identified that slow-moving vehicles, including agricultural vehicles, pedestrians, cyclists, horse riders, and sub-50cc motorcycles, must not use motorways.
Motorways are high-speed environments where significant speed differentials create extreme collision hazards.
2
Evaluate the vehicle options to determine which is subject to a total motorway ban.
Agricultural tractors are completely prohibited, whereas towing vehicles, heavy goods vehicles, and newly qualified drivers with 'P' plates are permitted under standard regulations.
The Highway Code explicitly excludes agricultural machinery from motorway access.

Anahtar Kavram

Prohibited vehicles and road users on UK motorways under Highway Code Rule 253
Tahmini Süre:45s
Sayfa 1 / 49Sonraki