Examkin

Tüm alıştırma soruları

84 soru

Tüm türler1,884Çoktan seçmeli962Çoklu seçim84Doğru / Yanlış379Sayısal32Eşleştirme249Sıralama178
Soru 1Soru →

A driver travelling at 60 mph on a dual carriageway disengages the clutch and selects neutral well before braking for a deceleration lane. Which TWO of the following are direct consequences of this action?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: The vehicle loses engine braking resistance, increasing the workload on the footbrake; Fuel consumption increases slightly compared to remaining in gear, as the engine must inject fuel to maintain idle

Cevap

Selecting neutral removes the vehicle's engine braking assistance—putting greater strain on the footbrake—and actually increases fuel consumption relative to overrun deceleration because modern engine control units must supply fuel to keep the engine idling.
Coasting disconnects the engine from the driveline, eliminating engine braking and placing the entire deceleration burden onto the footbrake. Furthermore, modern fuel-injected engines cut off fuel flow when decelerating with a gear engaged, meaning coasting in neutral actually uses more fuel to keep the engine idling.

Adım Adım Çözüm

1
Analyse the kinetic and mechanical effects of transmission disengagement at high speed.
With the clutch disengaged or neutral selected, the engine is disconnected from the driven wheels, eliminating engine compression resistance (engine braking).
This places sole deceleration responsibility on the friction brakes, increasing brake wear and operating temperatures.
2
Evaluate modern vehicle fuel management systems during coasting versus deceleration in gear.
Modern fuel-injected engines utilize deceleration fuel shut-off when the accelerator is released in gear, consuming zero fuel. In contrast, coasting in neutral forces the ECU to inject fuel to sustain idle RPM.
Coasting fails to save fuel and marginally increases consumption compared to properly utilizing overrun.
3
Evaluate electronic and safety system dependencies.
Safety systems like ABS and human reaction parameters (thinking distance) remain unaffected by gear selection.
Thinking distance is purely a function of human reaction speed and initial velocity, while ABS is independent of gearbox engagement.

Anahtar Kavram

Mechanics of Coasting and Engine Braking
Tahmini Süre:1m 30s
Soru 2Soru →

You are driving along a residential street and see an ice cream van parked at the kerb ahead. Which TWO actions should you take to manage the potential hazards?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Reduce your speed and be prepared to stop if needed; Scan actively for children who may step or run out from behind or in front of the vehicle

Cevap

Reduce speed, prepare to stop, and actively scan for children who might run or step out from around the parked vehicle.
Vehicles such as ice cream vans, school buses, and mobile shops are static hazards that attract children. Children are easily distracted and may dart into the road without checking for oncoming vehicles. Drivers must slow down, prepare to stop, and scan thoroughly around the vehicle's blind spots.

Adım Adım Çözüm

1
Identify the high-risk hazard zone
Recognise that a parked ice cream van naturally attracts young, unpredictable pedestrians.
Children may be preoccupied with their treats and oblivious to approaching traffic.
2
Adjust vehicle speed and readiness
Slow down significantly and cover the brake pedal.
Lower speed shortens the total stopping distance and allows time to react to sudden movements.
3
Expand visual scanning area
Check underneath the van, around the front and rear corners, and between nearby parked cars.
Pedestrians, especially small children, can emerge from blind spots without warning.

Anahtar Kavram

Anticipating vulnerable road users and managing hazards near vehicles that attract children
Soru 3Soru →

You are driving along a single carriageway road and observe that the vehicle behind is following far too closely. Which TWO actions should you take to safely manage this hazard? (Select TWO answers)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Ease off the accelerator gradually to increase the separation distance ahead of your car; Allow extra time and space to react smoothly if you need to slow down or stop

Cevap

Ease off the accelerator gradually to increase the separation distance ahead of your car, and allow extra time and space to react smoothly if you need to slow down or stop.
When a driver follows too closely behind, you cannot control their distance, but you can control the safety margin ahead of your own vehicle. Gradually easing off the accelerator expands the gap in front of you. This ensures you have plenty of time and space to anticipate hazards and brake gently, preventing the tailgater from colliding with the back of your car.

Adım Adım Çözüm

1
Assess the risk created by the tailgating vehicle
Recognise that the vehicle behind does not have enough stopping distance to react to sudden braking
Tailgaters compromise the rear safety margin, transferring the responsibility of maintaining overall safety space to the leading driver.
2
Adjust the forward safety gap smoothly
Gently ease off the accelerator to open up a larger gap to any vehicle or hazard ahead
An increased forward gap ensures all upcoming decelerations can be progressive and smooth, eliminating the need for abrupt braking.

Anahtar Kavram

Defensive gap management when being tailgated
Tahmini Süre:45s
Soru 4Soru →

You are driving at night on an unlit single carriageway when a vehicle behind begins tailgating you closely, causing glare in your mirrors. Which TWO actions should you take to safely manage your following distance and reduce risk?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Gradually ease off the accelerator to increase your gap from any vehicle ahead; Switch your interior rear-view mirror to the anti-dazzle position

Cevap

Gradually ease off the accelerator to increase your gap from any vehicle ahead, and switch your interior rear-view mirror to the anti-dazzle position.
When followed too closely, increasing your distance from the vehicle ahead provides a safety cushion so you can brake smoothly and gradually if needed, giving the tailgater time to react. Setting the interior mirror to anti-dazzle prevents blinding reflection from the trailing headlights without compromising situational awareness.

Adım Adım Çözüm

1
Assess the hazard created by the tailgater and mirror glare
Recognise that a vehicle following too closely cannot stop in time if you brake sharply, and glare reduces your vision
Tailgaters eliminate their own safety margin, requiring you to compensate with your forward space cushion
2
Adjust your forward following distance
Gently ease off the accelerator to extend the distance between your vehicle and the traffic ahead
A larger forward buffer ensures you can slow down gradually and avoid sudden braking
3
Minimise nighttime visual impairment
Operate the anti-dazzle tab on your interior mirror
This prevents headlight glare from temporarily blinding you while retaining observation of traffic behind

Anahtar Kavram

Defensive response to tailgating and nighttime glare
Tahmini Süre:1m 0s
Soru 5Soru →

Your car suffers engine failure on a motorway and you manage to stop safely on the hard shoulder. Which TWO actions should you take to keep yourself and your passengers safe?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Switch on your hazard warning lights to alert approaching traffic; Exit the vehicle using the left-hand doors and wait behind the safety barrier

Cevap

The correct actions are switching on your hazard warning lights and exiting the vehicle using the left-hand doors to wait behind the safety barrier.
Under UK Highway Code Rule 274, when stopped on the hard shoulder you must make your vehicle as visible as possible by switching on hazard warning lights. All occupants must exit via the left-hand passenger doors away from moving traffic and wait behind the safety barrier on the verge or embankment.

Adım Adım Çözüm

1
Warn approaching traffic of the hazard
Hazard warning lights are activated immediately upon stopping
Alerts approaching motorway drivers that your vehicle is stationary on the hard shoulder.
2
Safely evacuate all vehicle occupants
All passengers leave through the near-side (left-hand) doors
Prevents anyone from opening doors into or stepping onto live, high-speed traffic lanes.
3
Position occupants in a safe location away from the carriageway
Everyone moves behind the safety barrier and up the embankment
Provides maximum physical protection in the event another vehicle collides with the stationary car.

Anahtar Kavram

Motorway Breakdown Safety Protocol (UK Highway Code Rule 274)
Tahmini Süre:45s
Soru 6Soru →

You intend to reverse into a side road on your left to turn your vehicle around. Which TWO observation checks are essential before and during this manoeuvre?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Look all around your vehicle, including checking over both shoulders for blind spots; Continuously scan for approaching traffic, cyclists, and pedestrians from all directions

Cevap

Drivers must check all around the vehicle including blind spots over both shoulders, and continuously scan for traffic, cyclists, and pedestrians from all directions throughout the manoeuvre.
Before and during any reversing manoeuvre, a driver must conduct full 360-degree observations, including checking blind spots over both shoulders and scanning constantly for all other road users, especially vulnerable road users like pedestrians and cyclists.

Adım Adım Çözüm

1
Perform a comprehensive 360-degree observation before moving.
Identifies any immediate road users, pedestrians, or obstructions around the vehicle.
Mirrors alone do not reveal hazards located in vehicle blind spots.
2
Maintain active, continuous scanning in all directions while reversing.
Ensures emerging or approaching hazards in both the main road and side road are spotted promptly.
Reversing vehicles move slowly and cross traffic paths, requiring constant awareness.

Anahtar Kavram

All-round pre-manoeuvre observation and blind spot checking prior to and during reversing manoeuvres
Tahmini Süre:45s
Soru 7Soru →

You need to reverse your car out of a driveway onto a road where pedestrians are using the pavement. Which TWO actions should you take to keep pedestrians safe?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Check all around your vehicle, including blind spots, before and throughout the manoeuvre; Give way and wait for pedestrians walking on the pavement to pass safely behind you

Cevap

You should check all around your vehicle, including blind spots, before and throughout the manoeuvre, and give way to pedestrians walking on the pavement.
When reversing across a pavement, pedestrians have priority. Drivers must check all around the vehicle, including blind spots, and wait patiently for any pedestrians using the footway to pass safely.

Adım Adım Çözüm

1
Assess the pavement and driveway area for approaching pedestrians before moving
Identified pedestrian movement and visibility limitations around the vehicle.
Pedestrians, including children and older people, may approach quickly along the pavement from either side.
2
Carry out full 360-degree observations including blind spot checks and look directly through the rear window while moving slowly
Maintained complete situational awareness of the path behind the car.
Rear-view and side mirrors have blind spots that can conceal pedestrians.
3
Yield priority to any pedestrian on the pavement and wait until the path is completely clear
Completed the manoeuvre safely without endangering foot traffic.
Drivers crossing a pavement must always give way to pedestrians using the footway.

Anahtar Kavram

Driver observations and pedestrian priority when reversing across a pavement
Tahmini Süre:1m 0s
Soru 8Soru →

You are the first to arrive at the scene of a serious collision on a motorway at night. A car and a motorcycle are involved. There is a strong smell of unburnt fuel, the car driver is trapped but conscious, and the motorcyclist is lying motionless on the verge. Which of the following actions MUST you take to manage the scene safely?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Instruct everyone to extinguish cigarettes and ensure all vehicle engines at the scene are switched off.; Leave the motorcyclist in their current position and do not attempt to move them unless they are in immediate, life-threatening danger.

Cevap

You must ensure all vehicle engines are switched off and cigarettes are extinguished to neutralize the fire risk, and you must leave casualties exactly where they are unless they face an immediate, life-threatening danger.
Securing the scene safely requires neutralizing the immediate fire hazard by turning off engines and enforcing a strict no-smoking rule. Furthermore, to prevent causing severe secondary injuries (such as spinal cord damage), casualties must be left in their current position unless they face an immediate, life-threatening danger (like an active fire).

Adım Adım Çözüm

1
Assess the immediate hazards upon arriving at the scene.
Identify the strong smell of unburnt fuel as a critical and immediate fire risk.
Scene safety is always the first priority to prevent the situation from deteriorating and causing further casualties.
2
Mitigate the identified fire risk.
Switch off the engines of any involved vehicles and ensure no one is smoking nearby.
Spilled fuel can easily ignite from a hot exhaust, electrical spark, or a discarded cigarette.
3
Evaluate the condition of the casualties.
Recognize that both the trapped driver and the motionless motorcyclist have potentially suffered severe trauma.
A high-speed motorway collision carries a significant risk of spinal and neck injuries.
4
Apply the principles of basic casualty management.
Decide to leave the casualties in their current positions, providing verbal reassurance only.
Moving a casualty, or removing a crash helmet, can exacerbate spinal injuries. They should only be moved if there is an immediate, unavoidable danger such as an active fire.

Anahtar Kavram

Securing an accident scene involves neutralizing immediate hazards (like fire risks) and strictly avoiding actions that could worsen casualties' injuries (like moving them unnecessarily or using inappropriate warning devices on motorways).
Soru 9Soru →

You are driving along a narrow country road and approach two cyclists riding side by side just before a sharp blind bend. Which TWO actions should you take to manage this situation safely?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Hold back behind the cyclists until you have passed the bend and have a clear view ahead; Allow at least 1.5 metres (5 feet) of clearance when overtaking once it is safe

Cevap

Hold back behind the cyclists until you have passed the bend and have a clear view ahead, and allow at least 1.5 metres (5 feet) of clearance when overtaking once it is safe.
Cyclists are legally entitled to ride two abreast, which can improve their visibility and safety in groups or on narrow roads. Drivers must wait patiently behind them when visibility is restricted, such as before a blind bend. When an overtake is safe, drivers must give cyclists at least 1.5 metres of clearance at speeds up to 30 mph, and more space at higher speeds.

Adım Adım Çözüm

1
Assess the upcoming road geometry and potential hidden hazards
Identify that the sharp bend prevents a clear view of oncoming traffic, making immediate overtaking unsafe.
Overtaking without a clear view ahead risks a head-on collision with oncoming vehicles.
2
Maintain a safe following distance behind the cyclists until visibility improves
Keep a steady, calm speed behind both riders without pressuring or startling them.
Cyclists are permitted to ride two abreast, and drivers must wait patiently for a safe overtaking opportunity.
3
Execute the overtake only when the road is clear, providing ample lateral clearance
Pass the riders with at least 1.5 metres of clearance.
Compliance with Highway Code Rule 163 protects vulnerable road users from sudden gusts of wind, balance adjustments, or surface hazards.

Anahtar Kavram

Safe following, patience, and overtaking clearance for cyclists on rural roads
Tahmini Süre:1m 0s
Soru 10Soru →

You are preparing to carry bulky equipment on your vehicle's roof rack. Which TWO precautions should you take to distribute the weight safely and ensure the load remains secure?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Ensure the combined weight of the rack and cargo does not exceed the vehicle manufacturer's roof load limit; Fasten the load firmly using dedicated restraint straps and inspect the fixings periodically throughout the journey

Cevap

Ensuring the total weight does not exceed the vehicle manufacturer's specified roof load limit, and fastening the load securely with dedicated restraint straps while checking the fixings periodically throughout the journey.
When carrying cargo on a roof rack, the driver is legally and practically responsible for ensuring the total weight (roof rack plus cargo) does not exceed the vehicle manufacturer's roof load limit. Additionally, the load must be securely attached with appropriate restraint straps and checked at regular intervals during the journey to prevent movement caused by wind resistance and road vibration.

Adım Adım Çözüm

1
Check the vehicle handbook for the maximum permissible roof load capacity.
Establishes the upper weight boundary including the weight of the roof bars/rack itself.
Exceeding the specified roof limit compromises vehicle handling and raises the centre of gravity.
2
Position the load centrally and secure it with suitable restraint straps to dedicated anchor points.
Prevents load shifting during acceleration, braking, and cornering.
Unsecured or improperly tied loads can shift dynamically or detach into following traffic.
3
Plan regular stops during the journey to inspect strap tension and mounting integrity.
Ensures road vibration has not loosened the load or fixing brackets.
Aerodynamic forces and vehicle movement can cause fixings to settle and slacken over time.

Anahtar Kavram

Roof rack weight capacity limits and positive load restraint principles
Tahmini Süre:1m 0s
Soru 11Soru →

You are preparing to carry out a U-turn on a two-way residential road. Which TWO observation checks must you make before you begin turning?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Look all around 360 degrees, including checking over both shoulders for pedestrians, cyclists, and other road users; Check all interior and exterior mirrors to assess traffic approaching from both ahead and behind

Cevap

Check all interior and exterior mirrors, and look all around 360 degrees including over both shoulders before starting the manoeuvre.
Before executing a manoeuvre that crosses both lanes of traffic, drivers must establish complete 360-degree awareness. This is achieved by checking all interior and exterior mirrors and physically looking around over both shoulders to ensure blind spots are completely clear of vulnerable road users.

Adım Adım Çözüm

1
Assess the entire surrounding area using all mirrors
Identifies moving vehicles approaching from behind and in front
Mirrors provide the initial overview of surrounding traffic conditions.
2
Perform 360-degree direct visual checks around the vehicle, looking over both shoulders
Covers blind spots that mirrors cannot show, detecting pedestrians, cyclists, and motorcyclists
U-turns span across the entire width of the road, requiring complete situational awareness.

Anahtar Kavram

Pre-manoeuvre observation requires comprehensive mirror checks combined with effective blind spot observations before executing actions across traffic.
Tahmini Süre:45s
Soru 12Soru →

You are approaching a busy crossroads marked with a yellow criss-cross box junction and you intend to turn right. Which TWO of the following actions and rules apply when navigating this junction?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: You may enter the box junction and wait if your exit road is clear and you are prevented from turning only by oncoming traffic; You must check your mirrors and right-hand blind spot for filtering cyclists and motorcyclists before committing to the turn

Cevap

Drivers approaching a yellow box junction to turn right may enter the box and wait if their exit road is clear and they are only prevented from turning by oncoming traffic, and they must check their mirrors and blind spots for filtering cyclists or motorcyclists before turning.
Under UK Highway Code Rule 174, drivers are permitted to enter a yellow box junction to wait when turning right, provided the exit road is clear and they are held up only by oncoming traffic. Additionally, effective scanning, including mirror and blind spot checks for filtering cyclists and motorcyclists, is essential prior to steering across opposing lanes.

Adım Adım Çözüm

1
Assess the yellow box junction and verify that the intended exit road is clear and unobstructed.
Confirmation that the vehicle will not become trapped across the junction blocking cross traffic.
The Highway Code prohibits entering a box junction unless the exit road is clear, with a specific exception for right turns blocked only by oncoming traffic.
2
Move forward into the box junction to wait in a suitable position for a safe gap in oncoming traffic.
The vehicle is correctly positioned to complete the turn as soon as oncoming traffic clears.
Waiting within the box junction prevents unnecessary delay and maintains traffic flow.
3
Perform thorough observations, including checking mirrors and blind spots for filtering two-wheelers and pedestrians crossing the target road, before turning.
Safe completion of the right turn without causing conflict with oncoming or filtering road users.
Cyclists and motorcyclists may be passing stationary or moving oncoming traffic on either side.

Anahtar Kavram

Yellow Box Junction Rules and Right-Turn Observation Routine
Tahmini Süre:1m 0s
Soru 13Soru →

You have parked your car on the right-hand side of a one-way street. Which TWO observation checks are essential before you signal and move off into the flow of traffic?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Check your left exterior mirror for vehicles and cyclists approaching from behind; Look over your left shoulder to check the blind area on your passenger side

Cevap

Check your left exterior mirror for vehicles and cyclists approaching from behind, and look over your left shoulder to check the blind area on your passenger side.
When parked on the right-hand side of a one-way street, passing traffic approaches from behind on your left. Safe pre-manoeuvre observation requires checking the left exterior mirror and looking over your left shoulder to check the blind spot on the passenger side before signalling and moving off.

Adım Adım Çözüm

1
Evaluate the traffic flow pattern relative to your vehicle's position on the right-hand side of the one-way street.
Identify that passing traffic, including motor vehicles and cyclists, can legally approach and pass on your left side.
Unlike standard two-way roads where traffic flows on the right of a parked vehicle, a one-way street allows vehicles to pass on either side.
2
Check the interior mirror and left exterior mirror.
Observe approaching road users in the left lane behind you.
Mirror observation is the first step of the Mirrors-Signal-Manoeuvre routine to assess rearward traffic.
3
Perform a physical over-the-shoulder check to the left (nearside blind spot).
Ensures no pedestrians, cyclists, or vehicles are positioned alongside in areas hidden by the vehicle pillars and mirror blind spots.
Mirrors cannot capture the entire area alongside the passenger side, making a physical head check critical before moving away.

Anahtar Kavram

All-round observation routines and blind spot checks when moving off from the offside of a one-way street.
Tahmini Süre:45s
Soru 14Soru →

Under UK driving law, which TWO statements regarding driver eyesight requirements are correct?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: You must be able to read a standard vehicle number plate in good daylight from a distance of 20 metres.; You must wear glasses or contact lenses at all times while driving if you need them to meet the minimum eyesight standard.

Cevap

You must be able to read a standard vehicle number plate in good daylight from a distance of 20 metres, and you must wear glasses or contact lenses at all times while driving if you need them to meet the minimum eyesight standard.
According to the Highway Code (Rule 92) and UK law, drivers must be able to read a vehicle registration plate in clear daylight from a distance of 20 metres. If glasses or contact lenses are required to achieve this standard, they must be worn whenever driving.

Adım Adım Çözüm

1
Identify the statutory distance standard for driver eyesight in the UK.
Confirm that reading a standard number plate in good daylight from a distance of 20 metres is the legal benchmark.
Highway Code Rule 92 specifies the 20-metre number plate test as the legal standard for passenger car drivers.
2
Determine the legal rule regarding corrective lenses when driving.
Confirm that corrective lenses must be worn continuously during driving if needed to meet the standard.
Failing to wear necessary corrective lenses while driving constitutes driving without meeting the required legal standard.

Anahtar Kavram

UK Legal Eyesight Standards and Corrective Lenses Requirements
Tahmini Süre:45s
Soru 15Soru →

You are driving along a traffic-calmed urban road featuring pedestrian refuges and road narrowings (pinch points). Ahead of you, a cyclist moves to the centre of the lane (primary road position) to negotiate a narrowed section safely. Which TWO actions should you take? (Select TWO answers)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Wait behind the cyclist until you have passed the narrowed section and can give at least 1.5 metres of passing space; Allow the cyclist to ride in the primary position without tailgating or applying pressure

Cevap

Hold back behind the cyclist until past the narrowing where at least 1.5 metres of clearance is available, and allow them to maintain their central lane position without pressure.
According to Highway Code Rule 213, cyclists are permitted and advised to ride in the centre of the lane (primary position) on narrow sections of road and on approach to pinch points to protect their safety and discourage dangerous overtaking. Drivers must show patience, avoid intimidation, and only overtake once the road has widened and at least 1.5 metres of clearance can be safely maintained as required by Rule 163.

Adım Adım Çözüm

1
Recognise the road layout and the cyclist's primary road positioning.
Identify that the cyclist has positioned themselves in the centre of the lane specifically to deter unsafe close passes through the pinch point.
The Highway Code explicitly states that cyclists may ride in the centre of their lane on narrow road sections and when approaching pinch points.
2
Adjust vehicle speed and maintain separation.
Match the cyclist's speed and maintain a safe following distance without revving the engine or sounding the horn.
Applying pressure to a vulnerable road user increases the risk of loss of control and creates unnecessary hazard.
3
Plan a safe overtake once the road widens.
Hold position until clear of the narrowing, then overtake only when oncoming traffic is clear and at least 1.5 metres of passing clearance can be provided.
Drivers must leave at least 1.5 metres of space when overtaking cyclists at speeds up to 30 mph, and more space at higher speeds.

Anahtar Kavram

Cyclist primary positioning at road narrowings and safe passing clearance under the Highway Code
Tahmini Süre:1m 0s
Soru 16Soru →

As you negotiate a busy multilane roundabout to take an intermediate exit, a cyclist ahead remains in the left lane while travelling around the circulatory carriageway. Which TWO precautions must you take to deal safely with this situation?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Give the cyclist plenty of room and avoid cutting across their path when leaving at your exit; Recognise that cyclists may legally and safely stay in the left-hand lane regardless of which exit they intend to take

Cevap

Allow the cyclist plenty of room without cutting across their path when exiting, and recognise that cyclists may legally and safely remain in the left-hand lane even when continuing around the roundabout.
Under Highway Code Rule 187, drivers approaching or negotiating a roundabout must watch out for cyclists who may stay in the left-hand lane even if they intend to turn right or continue around the roundabout. Drivers must give them plenty of room, check mirrors and blind spots carefully, and never cut across their path when taking an exit.

Adım Adım Çözüm

1
Identify the cyclist's positioning and anticipate their route around the circulatory carriageway.
Awareness that vulnerable road users often stay on the outer perimeter for safety rather than moving to central or inner lanes.
Highway Code Rule 187 instructs drivers to give cyclists extra consideration at roundabouts, as they may feel safer staying in the left lane even when turning right.
2
Perform thorough observations, including the nearside mirror and blind spot check, before making any lateral movement toward your exit.
Confirmation of the cyclist's exact position relative to the vehicle's turning path.
Cyclists travel at lower speeds and can easily be masked in the vehicle's passenger-side blind spots.
3
Hold back and adjust vehicle speed to yield space rather than crossing ahead of the cyclist.
A safe exit manoeuvre completed without endangering or cutting off the cyclist.
Cutting across a cyclist crossing an exit lane forces them into emergency braking or an evasive collision.

Anahtar Kavram

Highway Code rules for navigating roundabouts alongside vulnerable road users who remain in the left-hand lane
Tahmini Süre:1m 15s
Soru 17Soru →

You are driving in an urban area and intend to turn left into a side road. A cyclist is travelling ahead of you on the left. Which TWO actions should you take to make the turn safely?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Hold back behind the cyclist until they have passed the junction before making your turn; Check your nearside mirror and blind spot to ensure no other cyclists are filtering on your left

Cevap

You should hold back behind the cyclist until they have passed the junction, and check your nearside mirror and blind spot for filtering road users before making the turn.
According to the Highway Code, drivers must not cut across cyclists who are travelling straight ahead when turning into or out of a junction. Drivers should wait patiently behind the cyclist until they have cleared the junction and must check their nearside mirror and passenger-side blind spot to ensure no other cyclists are filtering on the left.

Adım Adım Çözüm

1
Assess the position and speed of the cyclist ahead relative to the upcoming junction.
Recognise that attempting to overtake and turn left would cut across the cyclist's trajectory.
Under Highway Code Rule H3, drivers must not cut across cyclists travelling ahead, as cyclists have priority when proceeding straight.
2
Hold back behind the cyclist and conduct thorough mirror and blind-spot checks on the nearside.
The cyclist clears the junction safely and you verify no other road users are filtering on your left.
Maintaining proper separation and checking blind spots prevents left-hook collisions with vulnerable road users.

Anahtar Kavram

Giving way to cyclists travelling straight ahead and avoiding cutting across their path at junctions (Highway Code Rule H3)
Tahmini Süre:1m 0s
Soru 18Soru →

While driving on an all-lane running smart motorway, an engine warning forces you to pull into an Emergency Area (emergency refuge area). Which TWO actions should you take to comply with official breakdown procedures?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Switch on your hazard warning lights and ensure all occupants exit via the left-hand passenger doors; Use the emergency roadside telephone in the refuge area to contact the regional control centre

Cevap

Switch on your hazard warning lights and ensure all occupants exit via the left-hand passenger doors, and use the emergency roadside telephone in the refuge area to contact the regional control centre.
When stopping in an Emergency Area on a smart motorway, drivers must switch on hazard warning lights, ensure all occupants exit via the left-hand passenger doors to move behind the safety barrier, and use the emergency telephone provided. This ensures maximum protection against traffic collisions and gives regional control centres the exact vehicle location.

Adım Adım Çözüm

1
Secure vehicle visibility and conduct safe passenger evacuation.
Activate hazard warning lights and direct all passengers to exit exclusively through the left-side doors.
Exiting through the left-hand side prevents occupants from stepping into the path of live carriageway traffic.
2
Report the emergency using designated roadside infrastructure.
Use the free roadside emergency SOS phone situated in the refuge area to report the breakdown.
The emergency telephone immediately alerts traffic control operators, who can set variable signs and dispatch traffic officers.

Anahtar Kavram

Safety and reporting protocols for vehicle breakdowns in Emergency Areas on smart motorways
Tahmini Süre:1m 0s
Soru 19Soru →

You are driving on a motorway in severe, gusty crosswinds and are approaching an exposed viaduct. Which TWO actions should you take to maintain safe vehicle control?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Hold the steering wheel firmly with both hands; Reduce your speed and anticipate sudden turbulence

Cevap

Holding the steering wheel firmly with both hands and reducing your speed to anticipate sudden turbulence are the correct actions.
When driving across exposed structures such as viaducts or open bridges in severe crosswinds, sudden gusts can violently push a vehicle sideways. Keeping a firm two-handed grip on the steering wheel allows you to maintain control and counter buffeting immediately. Reducing speed minimises the physical impact of gusts and provides greater time to anticipate and react to turbulence.

Adım Adım Çözüm

1
Assess the environmental hazards of crossing an exposed viaduct in strong crosswinds
Recognise that elevated, open structures lack natural windbreaks and produce sudden, strong gusts.
Identifying the heightened risk of sideways buffeting is essential for taking timely precautions.
2
Apply appropriate vehicle control adjustments before and during the crossing
Reduce vehicle speed and maintain a firm, two-handed steering grip.
Lower speed diminishes sideways displacement, while a firm grip ensures immediate steering correction against gusts.

Anahtar Kavram

Vehicle Control and Stability in High Winds on Exposed Structures
Tahmini Süre:45s
Soru 20Soru →

You are following a motorcyclist along an unlit country road at night. The rider is travelling below the speed limit and frequently adjusting their line across the lane. Which TWO actions should you take to keep the rider safe? (Select TWO answers)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Keep your headlights on dipped beam to avoid dazzling the rider in their mirrors; Increase your following distance to allow the rider room to navigate unseen hazards

Cevap

Keep your headlights on dipped beam to prevent dazzling the rider in their mirrors, and increase your following distance to give them space to avoid hazards.
Motorcyclists are particularly vulnerable on unlit rural roads at night because they must navigate unseen hazards like potholes, gravel, or wildlife that can easily destabilise a two-wheeled vehicle. Keeping headlights on dipped beam prevents dazzling the rider through their wing mirrors, and increasing the separation distance ensures they have ample time and space to adjust their road positioning safely.

Adım Adım Çözüm

1
Assess the motorcyclist's behaviour and lighting conditions
Identify that the rider is scanning for road surface defects in the dark and needs clear vision.
Motorcycles are single-track vehicles highly susceptible to unlit surface hazards like potholes, mud, and debris.
2
Adjust vehicle lighting
Switch to or maintain dipped beam headlights when trailing the motorcycle.
Main beam illumination reflects directly into the rider's rearview mirrors, causing blinding glare.
3
Establish a safe following separation margin
Drop back further than the standard following gap.
Provides extra stopping distance and allows the rider freedom to swerve safely around road defects without fear of a rear-end collision.

Anahtar Kavram

Safe following separation and glare reduction when driving behind motorcyclists at night
Tahmini Süre:1m 30s
Sayfa 1 / 5Sonraki
Tüm alıştırma soruları — UK Driving Theory Test | Examkin