Examkin

Tüm alıştırma soruları

1884 soru

Tüm türler1,884Çoktan seçmeli962Çoklu seçim84Doğru / Yanlış379Sayısal32Eşleştirme249Sıralama178
Soru 781Soru →

While driving along an urban single carriageway, you notice an active film production set with bright lighting rigs and an audience gathered on the footway near the road. What should you do to manage this situation safely?

Cevabı ve açıklamayı göster

Cevap: Maintain your attention on your driving path and anticipate pedestrians stepping into the carriageway

Cevap

Maintain your attention on your driving path and anticipate pedestrians stepping into the carriageway
External roadside events, such as film sets or public performances, naturally attract attention. A responsible driver must resist the urge to look away from the road ahead, keep full concentration on driving, and anticipate vulnerable road users such as pedestrians stepping off a crowded pavement into the carriageway.

Adım Adım Çözüm

1
Identify the external distraction and associated hazards
Recognise that bright lights, crowds, and roadside activity can draw attention away from the road and lead to pedestrians spilling into the street
Driver situational awareness must prioritise road safety over roadside novelties
2
Maintain proper vehicle control and forward observation
Keep eyes scanning the driving path, check mirrors regularly, and be ready to slow down or stop safely if someone steps into the road
Safe driving requires resisting the urge to rubberneck and preparing for unexpected pedestrian movements

Anahtar Kavram

Driver alertness and resisting external roadside distractions while scanning for secondary hazards
Tahmini Süre:50s
Soru 782Soru →

You are driving along a busy road when an ambulance displaying flashing blue lights approaches behind you. What should you do to allow it to pass safely?

Cevabı ve açıklamayı göster

Cevap: Pull over to the side of the road when it is safe and legal to do so

Cevap

Pull over to the side of the road when it is safe and legal to do so
According to Highway Code Rule 219, when approached by an emergency vehicle with flashing lights and sirens, drivers must stay calm, look for a safe place to pull in, and come to a stop without breaking traffic laws or mounting pavements.

Adım Adım Çözüm

1
Check your mirrors and observe the road ahead to identify a safe, legal location to stop.
A suitable stopping location is found without endangering other road users or mounting kerbs illegally.
Sudden or illegal stopping can cause collisions and obstruct the emergency route.
2
Indicate your intention clearly, decelerate smoothly, and stop to give the emergency vehicle space to pass.
The emergency vehicle passes smoothly and without hindrance.
Complying with Highway Code Rule 219 ensures emergency services proceed swiftly while maintaining road safety.

Anahtar Kavram

Dealing with emergency vehicles safely under Highway Code Rule 219
Tahmini Süre:45s
Soru 783Soru →

When you see an emergency vehicle approaching from behind with flashing blue lights, you should look for a safe and legal place to pull over to let it pass.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True. Drivers must remain calm, observe their surroundings, and pull over in a safe and lawful location to allow emergency vehicles with active flashing blue lights to pass.
The statement is true because the UK Highway Code advises drivers to stay calm, check their surroundings, and pull over safely to allow emergency vehicles using flashing lights to progress without obstruction.

Adım Adım Çözüm

1
Identify the approaching moving hazard (emergency vehicle with flashing blue lights).
Recognise the need to facilitate safe passage for the priority vehicle.
Emergency vehicles respond to urgent incidents and need a clear, unhindered route.
2
Assess the road ahead and in mirrors for a safe, legal stopping location.
Identify a suitable spot to pull in without endangering pedestrians, blocking junctions, or mounting the kerb.
Harsh braking or stopping on blind bends, brow of hills, or junctions creates additional danger.
3
Signal clearly and pull smoothly to the side of the road to stop.
The emergency vehicle passes safely without delay.
Predictable, controlled driving maintains overall road safety.

Anahtar Kavram

Safely responding to approaching emergency vehicles as dynamic moving hazards
Tahmini Süre:30s
Soru 784Soru →

Drivers must adapt their following distance to preserve an adequate safety margin under varying road surfaces and traffic dynamics. Match each driving scenario on the left with its correct separation distance requirement on the right in accordance with the UK Highway Code.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Driving a car on a dry, free-flowing motorway under clear daylight conditions
Driving a car on a dual carriageway during persistent, heavy rain with standing surface water
Driving a car on a rural road covered with hard-packed snow and patches of black ice
Driving a car on a dry single carriageway while being followed aggressively too closely by a tailgater

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Dry motorway driving matches with maintaining a minimum 2-second gap; wet dual carriageway driving matches with maintaining a 4-second gap; icy/snowy conditions match with maintaining up to a 20-second gap; and dealing with a tailgater matches with easing back to increase the forward gap to at least 4 seconds.
Each scenario correctly pairs with its Highway Code Rule 126 safety standard: 2 seconds on dry roads, 4 seconds (doubled) on wet surfaces, up to 20 seconds (ten times) on ice or snow, and increasing forward headway to at least 4 seconds when tailgated to mitigate rear-end collision risk.

Adım Adım Çözüm

1
Identify the baseline separation distance for normal dry conditions.
The standard baseline is the two-second rule (a 2-second time gap).
Rule 126 of the UK Highway Code requires at least a two-second gap on dry roads to account for thinking and braking distances.
2
Apply the wet weather multiplier to the separation gap.
Double the baseline time gap from 2 seconds to 4 seconds.
Water on the road reduces tyre friction, doubling overall stopping distances.
3
Apply the severe winter weather multiplier for ice and snow.
Multiply the baseline time gap by ten, resulting in up to 20 seconds.
Ice and compacted snow drastically diminish tyre grip, increasing stopping distances up to tenfold.
4
Determine the defensive driving procedure when being tailgated.
Increase the safety margin ahead to at least 4 seconds.
Opening up extra space ahead provides a progressive braking buffer, preventing sudden stops that could cause the tailgating vehicle behind to collide.

Anahtar Kavram

Application of the Two-Second Rule, environmental condition multipliers, and hazard-mitigation separation strategies under UK Highway Code Rule 126.
Tahmini Süre:1m 30s
Soru 785Soru →

You are preparing to set off on a journey with your car carrying a full load of passengers and luggage. What adjustment should you make to your tyres before starting the trip?

Cevabı ve açıklamayı göster

Cevap: Increase tyre pressures to the recommended settings for carrying heavy loads

Cevap

Increase tyre pressures to the recommended settings for carrying heavy loads.
When a vehicle is carrying a full load of passengers and luggage, the extra weight puts greater stress on the tyres. The vehicle handbook specifies higher tyre pressures for full loads to ensure optimal contact with the road surface, prevent the tyres from flexing and overheating, and maintain vehicle stability.

Adım Adım Çözüm

1
Check the vehicle handbook or tyre placard for loading recommendations.
Identified the specific higher PSI/bar pressure settings required for a fully loaded vehicle.
Vehicle manufacturers specify distinct tyre inflation pressures for normal versus fully loaded conditions to preserve safety.
2
Inflate all tyres to the heavy-load specification while the tyres are cold.
Tyre pressures are correctly set for the additional weight of passengers and luggage.
Proper tyre inflation ensures correct contact with the road, prevents overheating, maintains steering responsiveness, and supports fuel economy.

Anahtar Kavram

Tyre pressure adjustments for heavy vehicle loads
Tahmini Süre:45s
Soru 786Soru →

You are driving on a dry road and maintaining a safe separation distance behind the vehicle in front. If another car overtakes you and pulls into your safety gap, what should you do?

Cevabı ve açıklamayı göster

Cevap: Gradually ease off the accelerator and drop back until a safe two-second gap is restored

Cevap

Gradually ease off the accelerator and drop back until a safe two-second gap is restored
Under normal, dry conditions, drivers must maintain at least a two-second separation distance. When another vehicle enters that buffer space, easing off the accelerator allows you to safely and smoothly drop back until the two-second gap is restored without surprising vehicles behind.

Adım Adım Çözüm

1
Assess the following distance after another vehicle pulls into your lane
The separation gap between your vehicle and the vehicle ahead has been reduced below the minimum safe distance of two seconds
Maintaining a minimum two-second time gap on dry roads is essential to provide enough thinking and braking space if traffic ahead stops suddenly
2
Adjust your vehicle's speed smoothly to regain the safe gap
Your vehicle gently drops back until a full two-second separation distance is re-established
Easing off the accelerator allows following distance to increase smoothly without triggering sudden harsh braking that could endanger vehicles behind

Anahtar Kavram

Re-establishing the minimum two-second separation gap when following distance is compromised
Tahmini Süre:45s
Soru 787Soru →

If an oncoming vehicle begins overtaking and moves into your lane on a single carriageway, you should maintain your speed and lane position because you have the right of way.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. Drivers must never insist on right of way when an oncoming vehicle creates a dynamic moving hazard in their lane; they must slow down and move left to prevent a collision.
The statement is false because defensive driving requires motorists to adapt immediately to developing moving hazards. When an oncoming vehicle undertakes a risky overtaking manoeuvre in your lane, maintaining speed or holding your ground drastically increases the risk of a high-speed head-on collision. The correct response is to check mirrors, decelerate smoothly, and position your vehicle towards the left edge of the road to provide adequate safety margins.

Adım Adım Çözüm

1
Identify the immediate dynamic hazard developing ahead
Recognise that an oncoming vehicle has moved across the centre line into your direct path during an unsafe overtaking manoeuvre.
Early detection of a moving hazard allows maximum time and distance to react.
2
Prioritise collision prevention over legal priority
Discard the assumption that having right of way protects your safety.
The Highway Code requires all road users to act defensively to avoid danger regardless of priority.
3
Execute defensive evasive measures
Check your rear-view mirror, ease off the accelerator, apply the brakes progressively, and steer gently towards the left-hand side of your lane.
Decelerating reduces impact force and gives the oncoming driver more time and space to complete or abort their manoeuvre safely.

Anahtar Kavram

Defensive response to dynamic moving hazards and prioritising collision avoidance over right of way
Tahmini Süre:45s
Soru 788Soru →

A vehicle's overall stopping distance consists of thinking distance followed by braking distance. Match each factor to its specific and direct effect on these distance components.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Driver cognitive distraction caused by a hands-free mobile phone call
Increasing vehicle speed while maintaining the same physical reaction time
Standing water and wet road conditions on the carriageway
Significantly worn brake pads and degraded brake fluid

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Driver cognitive distraction matches with increasing thinking distance via delayed perception; Increasing vehicle speed matches with increasing thinking distance due to greater distance covered per second; Standing water matches with increasing braking distance due to reduced tyre grip; Worn brake components match with increasing braking distance due to reduced mechanical friction.
Total stopping distance consists of thinking distance plus braking distance. Thinking distance is strictly influenced by two parameters: the driver's reaction time (affected by fatigue, alcohol, drugs, illness, and distractions such as phone conversations) and vehicle speed (higher speed covers more distance in the same time). In contrast, road conditions (wet asphalt) and vehicle maintenance (worn brakes) only influence braking distance.

Adım Adım Çözüm

1
Differentiate between driver-related factors and vehicle/environmental factors.
Driver distraction and vehicle travel speed determine thinking distance, whereas road surface and brake condition determine braking distance.
Thinking distance is the distance travelled before the brakes are applied, while braking distance is the distance travelled while the brakes are active.
2
Analyse the direct mechanism for each thinking distance factor.
Cognitive distraction increases the time taken to react, whereas higher speed increases the physical distance traversed during that reaction time.
Thinking distance formula is Speed multiplied by Driver Reaction Time.
3
Analyse the direct mechanism for each braking distance factor.
Wet road surfaces reduce tyre-to-tarmac grip, while worn brake pads diminish the mechanical force applied to stop the wheels.
Both external road friction and internal vehicle mechanical efficiency govern deceleration once the brake pedal is pressed.

Anahtar Kavram

Factors affecting thinking distance (driver reaction time and speed) versus factors affecting braking distance (road conditions, weather, and vehicle mechanics).
Tahmini Süre:1m 0s
Soru 789Soru →

You are driving along a busy single carriageway where oncoming traffic has queued back from a junction. You see an oncoming driver flash their headlights at a vehicle waiting to turn out from a side road on your left. What is the safest course of action?

Cevabı ve açıklamayı göster

Cevap: Slow down and prepare to stop, anticipating that the emerging vehicle may pull out across your path

Cevap

Slow down and prepare to stop, anticipating that the emerging vehicle may pull out across your path
The driver waiting at the side road may misinterpret the oncoming vehicle's flashing headlights as a signal that both lanes are clear to proceed. Defensive driving requires reducing speed and being ready to stop if that vehicle enters your lane unexpectedly.

Adım Adım Çözüm

1
Identify the dynamic hazard and communication ambiguity
Recognise that the oncoming driver's headlight flash is directed at the emerging car, not you, but could be dangerously misinterpreted.
Under the Highway Code, flashing headlights only indicate presence, yet many drivers mistakenly take them as an invitation to move.
2
Evaluate potential conflicting movements
Anticipate that the emerging vehicle may pull out across your lane without seeing your approach through the queue.
Stationary queues obscure sightlines, making emerging vehicles a high-risk moving hazard.
3
Apply defensive vehicle control
Ease off the accelerator, check your rear-view mirror, and prepare to brake smoothly without erratic swerving.
Reducing speed increases your safety margin and provides sufficient stopping distance should the vehicle emerge.

Anahtar Kavram

Defensive response to emerging vehicles and ambiguous headlight signals
Tahmini Süre:1m 0s
Soru 790Soru →

In clear weather on a dry road surface, what is the minimum safe time separation gap (in seconds) that should be maintained behind the vehicle in front?

Cevabı ve açıklamayı göster

Cevap: 2

Cevap

2 seconds
Under dry, clear road conditions, the UK Highway Code recommends leaving a minimum time gap of 2 seconds behind the vehicle ahead. This provides sufficient space for the driver to observe hazards, react, and brake safely if the vehicle in front slows or stops suddenly.

Adım Adım Çözüm

1
Identify the environmental driving conditions described in the question.
The road is dry and weather conditions are clear.
Road surface conditions determine the appropriate time separation gap multiplier to apply.
2
Apply the standard Highway Code baseline separation rule for dry road surfaces.
The minimum time interval is 2 seconds.
Rule 126 of the UK Highway Code states that drivers should allow at least a two-second gap between their vehicle and the vehicle in front on roads carrying faster-moving traffic in dry conditions.

Anahtar Kavram

The two-second rule establishes the minimum safe following distance between vehicles in normal, dry road conditions to allow adequate thinking and braking margins.
Tahmini Süre:30s
Soru 791Soru →

A driver encounters several distinct dashboard warning light signals while driving on a dual carriageway. Match each warning light situation to its corresponding vehicle status and necessary driver response.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Red engine oil pressure light illuminates continuously while driving at speed
Amber Electronic Stability Control (ESC) light flashes intermittently during a turn
Amber Engine Management / Malfunction Indicator Lamp (MIL) illuminates steadily
Red battery charge warning light illuminates and remains on while the engine is running

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Each dashboard warning matches its respective severity level: the red oil pressure light demands an immediate safe stop and engine shut-down; the flashing amber ESC light signifies active traction intervention; the steady amber engine management light allows cautious driving to a repair garage; and the red battery light indicates an alternator charging fault operating on reserve battery power.
Red warning lights convey immediate hazards: the red oil pressure light mandates stopping and switching off the engine at once to avoid engine destruction, while the red battery light indicates charging failure where electrical reserves are rapidly depleting. Amber indicators serve advisory or cautionary roles: a flashing ESC light signifies live stability intervention during wheel slip, and a solid amber engine management lamp permits driving cautiously to a garage for diagnostic scanning.

Adım Adım Çözüm

1
Differentiate between critical immediate-stop indicators (red) and caution/monitoring indicators (amber).
Identified that the oil pressure and battery warnings represent critical system malfunctions, whereas the ESC and engine management lights represent operational interventions or non-emergency diagnostics.
Official UK driving standards distinguish red warning lights (immediate danger to vehicle/safety) from amber lights (caution, advisory, or scheduled inspection needed).
2
Analyze the specific mechanical consequence of the red engine oil pressure warning.
Matched the red oil light to an immediate stop and engine cut-off because running without oil pressure leads to rapid engine seizure.
Oil pressure loss prevents internal component lubrication, causing catastrophic mechanical failure within seconds.
3
Analyze dynamic system behaviour versus static warning lamps for the amber signals.
Linked the flashing ESC light to active stability intervention, and the solid amber engine management light to non-urgent garage diagnostics.
Flashing stability lights show active engagement during loss of grip, while a steady amber engine light permits continued cautious driving.
4
Evaluate the electrical charging system failure represented by the battery warning light.
Matched the red battery light to an alternator charging failure running on depleting battery reserves.
The battery light activates when the alternator voltage output drops below battery voltage, running essential vehicle electronics on temporary reserve charge.

Anahtar Kavram

Hierarchy of Dashboard Warning Light Severities and Active System Feedback
Tahmini Süre:1m 30s
Soru 792Soru →

When driving in dense fog, closing the distance to keep the tail lights of a leading vehicle continuously in view is a safe technique for maintaining your safety margin.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false because relying on the tail lights of a leading vehicle leads to following too closely and causes target fixation. In dense fog, visibility is severely impaired and depth perception is distorted; drivers must increase their following distance well beyond normal conditions and drop their speed so they can stop comfortably within the clear distance visible ahead.

Adım Adım Çözüm

1
Analyse the hazard and perceptual distortions caused by dense fog.
Fog scatters light and obscures visual reference points, making objects appear further away and moving slower than they actually are.
Recognising that human perception is compromised is vital for calculating safe safety margins.
2
Evaluate the safety impact of tracking a lead vehicle's tail lights.
Drivers who focus on tracking tail lights invariably move closer than normal, eroding the separation distance required to stop safely.
This habit induces target fixation and leads to dangerous bunching of traffic at high risk of multi-vehicle pile-ups.
3
Determine the correct following margin adjustment required by The Highway Code.
Drivers must substantially increase their following distance, reduce speed, and rely on road markings and the speedometer rather than shadowing another vehicle.
The statement asserts that closing up to track tail lights is safe, which directly contradicts road safety rules.

Anahtar Kavram

Following Distance and Visual Perception in Dense Fog
Soru 793Soru →

You intend to turn right from a two-way main road into a side street. Arrange the following steps in the correct order to carry out the observation and driving routine safely.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with checking the interior and right door mirrors, followed by signalling right, positioning just to the left of the centre line with straight wheels, scanning oncoming traffic and junction hazards, and finally completing the turn across the opposing lane.
The correct sequence follows the standard UK Mirror–Signal–Manoeuvre (MSM) routine. Mirror checks must always precede signalling to evaluate traffic behind. Once signalled, positioning correctly near the centre line clarifies intentions. Prior to executing the turn, thorough observation of oncoming traffic and the target road entrance is required to give way appropriately to oncoming traffic and crossing pedestrians.

Adım Adım Çözüm

1
Check interior and right-side door mirrors.
Awareness of the presence, distance, and speed of vehicles behind you.
You must establish whether it is safe to slow down and signal without alarming or conflicting with following traffic or overtaking road users.
2
Apply the right-turn direction indicator in good time.
Clear communication to surrounding road users.
Gives oncoming drivers, following vehicles, and pedestrians adequate notice of your planned change in direction.
3
Adopt a road position just to the left of the centre line with the wheels pointing forward.
Optimal road placement and space management.
Allows traffic behind to pass on the left where space permits and ensures safety against rear-end shunts.
4
Scan oncoming traffic, cycle lanes, and the target side road entrance.
Accurate situational awareness of all potential moving and static hazards.
Identifies closing gaps in oncoming traffic, filtering two-wheeled vehicles, and pedestrians who have priority when crossing the junction.
5
Steer across the oncoming carriageway into the side road.
Safe completion of the right-turn manoeuvre.
Turning only takes place once an acceptable safety margin has been verified in all relevant observation zones.

Anahtar Kavram

Mirror–Signal–Manoeuvre (MSM) and Position–Speed–Look (PSL) routine for right-hand turns
Tahmini Süre:1m 0s
Soru 794Soru →

While approaching a stationary bus at a designated bus stop in a busy commercial area, which TWO observation actions should you take to anticipate hidden hazards before passing? (Select TWO answers)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Scan underneath and around the front of the bus for the feet or shadows of crossing pedestrians; Check your mirrors and right-side blind spot before moving out to overtake

Cevap

Scan underneath and around the front of the bus for crossing pedestrians, and check mirrors and right-side blind spot before moving out.
When passing a stationary bus, effective observation involves actively scanning for pedestrians who may emerge from in front of the vehicle (such as looking for feet or shadows underneath) and conducting full mirror and blind-spot checks before moving out into the opposing lane to ensure no trailing road user is already overtaking.

Adım Adım Çözüm

1
Scan the perimeter and underneath the stationary vehicle
Early identification of vulnerable pedestrians stepping out into the carriageway
Large vehicles create substantial blind spots where pedestrians often cross without clear sightlines
2
Perform mirror checks and a right shoulder blind-spot check before moving out
Safe positioning without conflict with overtaking traffic or cyclists
Moving past an obstruction requires changing road position across the centre line, necessitating all-round observation

Anahtar Kavram

All-round observation routines and hazard anticipation around stationary visual obstructions
Tahmini Süre:1m 0s
Soru 795Soru →

You are waiting at the give-way line of a roundabout. You observe a horse rider already on the roundabout in the left-hand lane, approaching from your right. The rider is extending their right arm horizontally. How must you interpret this moving hazard, and what is the safest action?

Cevabı ve açıklamayı göster

Cevap: Understand that the rider intends to continue around the roundabout to the right while remaining in the left lane; you must wait until they have fully passed.

Cevap

Understand that the rider intends to continue around the roundabout to the right while remaining in the left lane; you must wait until they have fully passed.
According to the Highway Code, horse riders, cyclists, and horse-drawn vehicles may stay in the left-hand lane of a roundabout even if they are turning right. They will signal right to show they are continuing around the roundabout and are not leaving at the current exit. You must anticipate this behaviour, yield to them, and wait until they have safely passed your junction before entering the roundabout.

Adım Adım Çözüm

1
Analyze the rider's lane position and hand signal.
The rider is positioned in the left lane but is signalling right.
Horse riders are highly vulnerable on roundabouts and require special consideration.
2
Apply Highway Code rules for vulnerable road users on roundabouts.
Recognize that horse riders, cyclists, and horse-drawn vehicles are permitted to stay in the left-hand lane even when turning right.
It is often much safer for vulnerable users to remain on the outside lane to avoid crossing fast-moving traffic.
3
Determine the required defensive response to this moving hazard.
You must remain safely behind the give-way line until the rider has passed your junction.
Pulling out would cut across their path, and making loud noises (like sounding the horn) could spook the animal and cause a severe incident.

Anahtar Kavram

Vulnerable Road Users on Roundabouts
Soru 796Soru →

You have bought medicine from a chemist to treat a cold, and the packaging warns that it may cause drowsiness. You need to make a journey to attend an appointment. What action should you take?

Cevabı ve açıklamayı göster

Cevap: Do not drive and arrange an alternative way to travel

Cevap

Do not drive and arrange an alternative way to travel
Under UK law and The Highway Code, you must be medically fit to drive at all times. If medication makes you drowsy, your reaction times and hazard perception will be significantly impaired. Therefore, you must not drive and should use alternative transport instead.

Adım Adım Çözüm

1
Assess the effect of the medication on driver capability
Recognise that drowsiness severely impairs reaction times, concentration, and hazard perception
Safe driving requires full concentration, clear vision, and quick reflexes
2
Apply the legal and Highway Code requirements regarding fitness to drive
Determine that driving while impaired by any medicine is both unsafe and illegal
It is an offence to drive while unfit through drugs, including over-the-counter medicines
3
Select the correct, safe course of action
Avoid driving the vehicle entirely and use alternative transport methods
Alternative transport eliminates any risk to yourself and other road users

Anahtar Kavram

Driver fitness and the impact of medicinal side effects on road safety
Tahmini Süre:1m 0s
Soru 797Soru →

You are travelling behind another vehicle on an open road in dry conditions, maintaining the recommended two-second following gap. Sudden rainfall causes the road surface to become wet and slippery. How should you adjust your time separation gap to maintain an adequate safety margin?

Cevabı ve açıklamayı göster

Cevap: Double the time gap to at least four seconds

Cevap

Double the time gap to at least four seconds
Under dry conditions, the standard two-second rule provides an adequate separation margin. When rain makes the road surface wet, tyre adhesion is substantially reduced and overall stopping distances double. Consequently, the minimum safe time separation gap must be doubled from two seconds to at least four seconds.

Adım Adım Çözüm

1
Identify the standard baseline separation rule for good, dry road conditions
In normal dry conditions, drivers must maintain a minimum following distance of at least two seconds behind the vehicle ahead.
Two seconds provides adequate time for perception, reaction (thinking distance), and normal braking.
2
Assess the effect of wet weather on vehicle stopping distances and tyre adhesion
Water on the road reduces tyre grip, causing braking distance to double.
Tyres experience reduced friction on wet tarmac, meaning stopping distance is roughly twice that of dry conditions.
3
Apply the appropriate weather multiplier to calculate the adjusted time gap
Multiplying the base two-second gap by two yields a required minimum separation gap of at least four seconds.
The time gap must be doubled to maintain a safe buffer zone under wet conditions.

Anahtar Kavram

Separation Distances and the Two-Second Rule in Wet Weather
Tahmini Süre:1m 0s
Soru 798Soru →

You stop at a petrol station forecourt and need to walk to the cashier to pay for fuel. What should you do before leaving your vehicle unattended?

Cevabı ve açıklamayı göster

Cevap: Switch off the engine, remove the ignition key, and lock all doors

Cevap

Switch off the engine, remove the ignition key, and lock all doors
Whenever you leave your vehicle unattended—even for a few moments to pay for fuel—you must switch off the engine, remove the key from the ignition, and lock all doors and windows to prevent theft and comply with the Highway Code.

Adım Adım Çözüm

1
Assess the security risk when leaving the vehicle unattended on a forecourt
Recognise that opportunistic theft can happen within seconds, regardless of how brief the stop is
Vehicle security measures must be applied every time the driver leaves the car
2
Determine the necessary legal and physical anti-theft precautions
Turn off the engine, take the keys with you, close all windows, and ensure all doors are locked
The Highway Code strictly prohibits leaving an unattended vehicle with the engine running, and locking the car protects it from theft

Anahtar Kavram

Securing an unattended vehicle during short stops
Tahmini Süre:45s
Soru 799Soru →

You are driving along a busy road and realise you need to reprogram your satellite navigation system. What is the safest course of action?

Cevabı ve açıklamayı göster

Cevap: Find a safe and legal place to pull over and stop before adjusting the device

Cevap

Pull over and stop in a safe and legal place before altering the navigation settings.
According to the Highway Code, any adjustment to in-vehicle technology, such as satellite navigation, should only be carried out when the vehicle is safely parked in a legal and suitable location. Attempting to program devices while driving distracts your eyes, hands, and mind from the driving task.

Adım Adım Çözüm

1
Identify the need to alter in-vehicle navigation settings while driving.
Recognised that interacting with the screen while in motion creates a significant cognitive and visual distraction.
Operating satellite navigation systems while driving severely degrades reaction times and hazard awareness.
2
Locate an appropriate, safe, and legal parking or stopping place.
The vehicle is safely brought to a complete stop away from active traffic flow.
Stopping safely removes any risk of divided attention on the roadway.
3
Adjust the navigation settings only while the vehicle is stationary and parked securely.
The route is updated without compromising road safety.
Complete concentration can be given to the device without creating a driving hazard.

Anahtar Kavram

Managing in-car electronic distractions by stopping safely before making adjustments
Tahmini Süre:45s
Soru 800Soru →

You are following a slow-moving refuse collection vehicle on a narrow residential street with workers moving actively around it. In what chronological order should you carry out the following actions to handle this moving hazard safely?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

Check mirrors first, reduce speed by braking smoothly, hold back at a safe distance, and pass only when the road is completely clear and safe.
Dealing with dynamic moving hazards such as refuse collection vehicles requires the standard defensive driving routine: early observation in mirrors, smooth deceleration, maintaining a safe hold-back position, and proceeding to pass only when the space and visibility are completely clear.

Adım Adım Çözüm

1
Check rear-view and side mirrors.
Awareness of following vehicles and their closing speeds.
The standard hazard management routine requires early observation before altering vehicle speed.
2
Ease off the accelerator and brake gently.
Vehicle speed reduces progressively.
Smooth deceleration allows following drivers sufficient time to react and prevents tail-end collisions.
3
Position your vehicle safely back from the moving hazard.
A broad safety buffer and wide field of vision around the refuse vehicle.
Holding back ensures you remain visible to the lorry driver and gives ample time to stop if a worker steps into the carriageway.
4
Scan ahead and pass cautiously when clear.
Safe completion of the manoeuvre without endangering vulnerable pedestrians or opposing traffic.
Overtaking should only be executed once visibility is unobstructed and sufficient clearance is assured.

Anahtar Kavram

Defensive Driving and the Hazard Management Routine for Moving Hazards
Tahmini Süre:45s
ÖncekiSayfa 40 / 95Sonraki
Tüm alıştırma soruları — UK Driving Theory Test | Examkin