Examkin

Tüm alıştırma soruları

1884 soru

Tüm türler1,884Çoktan seçmeli962Çoklu seçim84Doğru / Yanlış379Sayısal32Eşleştirme249Sıralama178
Soru 1401Soru →

While following a long coach approaching a junction, you notice it signalling to turn left, but the vehicle begins moving towards the right side of the road. What action should you take?

Cevabı ve açıklamayı göster

Cevap: Hold back behind the coach and give it enough space to complete the manoeuvre

Cevap

Hold back behind the coach and give it enough space to complete the manoeuvre.
Long vehicles such as buses and coaches need extra room to negotiate tight corners at junctions. To avoid clipping the kerb with their rear wheels, drivers often swing out to the opposite side before turning. Drivers following behind must recognize this manoeuvre, hold back, and allow sufficient clearance.

Adım Adım Çözüm

1
Identify the vehicle type and its intended manoeuvre from the direction indicator
Recognise that a long coach is preparing to turn left.
Large and long passenger transport vehicles have extended wheelbases and wide turning circles.
2
Interpret the vehicle's road positioning
Understand that the coach is moving out to the right to prevent its rear wheels from mounting the kerb on the left.
Long vehicles must often swing out wide to clear the radius of a tight corner.
3
Determine the safe driving response
Maintain a safe distance behind the coach and wait patiently until the turn is completed.
Attempting to undertake or squeeze alongside increases collision risk and blocks the coach.

Anahtar Kavram

Understanding long vehicle turning arcs and swept space requirements
Tahmini Süre:50s
Soru 1402Soru →

You are driving in the left-hand lane of a dual carriageway and intend to move into the right-hand lane to overtake a slower-moving vehicle. In what sequence should you carry out these actions to safely change lanes? Arrange the steps in the correct order from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence follows the Mirrors-Signal-Manoeuvre (MSM) routine: first check the interior and right-hand mirrors, next signal right in good time, then check the right blind spot, and finally move smoothly into the right-hand lane.
Safe lane discipline requires strict adherence to the Highway Code's Mirrors-Signal-Manoeuvre (MSM) routine: assess rear and side mirrors first, signal your intention clearly, confirm the right blind spot is clear, and steer smoothly into the target lane.

Adım Adım Çözüm

1
Check the interior mirror and right door mirror.
Identifies the position and closing speed of following vehicles in both lanes.
You must ensure there is sufficient space and no rapidly approaching vehicle in the target lane before indicating.
2
Signal right in good time.
Informs traffic ahead and behind of your intention to change lanes.
Signalling in advance gives surrounding road users sufficient notice to react safely.
3
Check the right blind spot over your right shoulder.
Detects any road users that are hidden from your mirrors.
Mirrors have blind areas that must be visually verified immediately before beginning the lateral move.
4
Steer smoothly into the right-hand lane.
Adopts the new lane position to begin overtaking.
Smooth steering maintains vehicle stability and prevents startling other road users.

Anahtar Kavram

Applying the Mirrors-Signal-Manoeuvre (MSM) routine and blind spot checks during lane changes on multi-lane roads.
Tahmini Süre:45s
Soru 1403Soru →

Before moving out to overtake a vehicle on a multi-lane road, checking the interior and exterior mirrors provides a complete view, making a shoulder check unnecessary.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false. Under UK Highway Code Rule 162, before moving out to overtake, drivers must make sure the road is clear ahead and behind, taking particular care to check their blind spots. Mirrors do not cover all angles around the vehicle, so relying exclusively on them risks pulling out into the path of an unseen road user.

Adım Adım Çözüm

1
Assess the visual coverage provided by vehicle mirrors during pre-overtaking observation.
Mirrors provide rearward and partial side vision but leave unmonitored blind spots adjacent to the vehicle.
Physical mirror angles cannot capture the entire perimeter around the vehicle.
2
Determine the required observation routine before commencing an overtaking manoeuvre under UK driving rules.
Drivers must combine mirror checks with a physical shoulder check into blind spot areas.
Highway Code Rule 162 requires drivers to ensure the road is clear ahead and behind, including checking blind spots, before pulling out.

Anahtar Kavram

Pre-manoeuvre observation and blind spot checks prior to overtaking
Tahmini Süre:45s
Soru 1404Soru →

On UK motorways, a speed limit displayed on an overhead gantry inside a red circle is legally mandatory, whereas a speed limit shown alongside flashing amber lights is an advisory recommendation.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True (speed limits inside a red circle are legally mandatory, while speeds shown with flashing amber lights are advisory)
The statement correctly reflects UK motorway regulations: variable speed limits enclosed in a red circle are mandatory and legally enforceable, whereas numeric speeds displayed alongside flashing amber lights serve as advisory guidance to warn of hazards ahead.

Adım Adım Çözüm

1
Examine the regulatory status of motorway signals displaying a speed limit inside a red circle.
Identify that signs enclosed in a red circle convey mandatory legal instructions under UK traffic law and the Highway Code.
Variable speed limits displayed within red rings on smart motorways and gantries are legally binding and subject to automatic camera enforcement.
2
Examine the meaning of motorway signals accompanied by flashing amber lights.
Identify that flashing amber lights indicate a hazard ahead and display advisory information.
Highway Code Rule 257 specifies that flashing amber lights warn of hazards and recommend a safe speed, but they do not create a statutory mandatory limit.
3
Compare both parts of the statement against UK motorway rules to evaluate its truth value.
Confirm that the statement accurately contrasts mandatory speed limits with advisory hazard warnings.
Both clauses correctly state official UK driving regulations regarding motorway matrix signals.

Anahtar Kavram

Distinction between mandatory motorway variable speed limits and advisory flashing amber signals
Tahmini Süre:45s
Soru 1405Soru →

You are waiting at a T-junction intending to turn right onto a dual carriageway where the central reservation is wide enough to protect your vehicle. In what order should you carry out the following actions to complete the turn safely?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

Look right and wait for a gap on the first carriageway, drive across into the central reservation, stop and check traffic approaching from the left, then join the second carriageway when clear.
According to Rule 173 of the Highway Code, when turning right onto a dual carriageway with a central reservation that is wide enough to protect your vehicle, you should treat each half of the road as a separate crossing. First, check for traffic approaching from the right and wait for a safe gap to cross into the central reservation. Once safely positioned in the reservation, stop and check for oncoming traffic approaching from the left on the second carriageway, completing the turn when it is safe to do so.

Adım Adım Çözüm

1
Observe traffic approaching from your right on the nearest carriageway.
Identifies when the first half of the dual carriageway is clear to cross.
Traffic on the near side of the dual carriageway travels from your right.
2
Proceed into the central reservation opening.
Positions the vehicle safely between the two carriageways without blocking either lane.
The central reservation is wide enough to shelter the vehicle completely.
3
Come to a stop in the reservation and scan for traffic approaching from the left.
Allows a clear view of the second carriageway without being exposed to moving vehicles.
Traffic on the far carriageway travels from your left.
4
Turn right and merge into the second carriageway.
Completes the manoeuvre safely without causing other vehicles to change speed or direction.
The manoeuvre is finished only after confirming a safe gap in the second traffic stream.

Anahtar Kavram

Negotiating dual carriageway junctions with a central reservation as two separate crossings (Highway Code Rule 173)
Tahmini Süre:45s
Soru 1406Soru →

At road junctions, oncoming motorcyclists can be difficult to judge accurately because their narrow silhouette often makes them appear to be travelling slower and further away than is actually the case.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True
The statement is true because the narrow frontal outline of a motorcycle provides fewer visual cues, frequently causing drivers to underestimate its approach speed and overestimate its distance at junctions.

Adım Adım Çözüm

1
Examine the physical and visual characteristics of a motorcycle approaching a junction.
A motorcycle presents a much narrower silhouette compared to larger multi-track vehicles.
Visual size and the rate of angular expansion are key cues used by the human brain to estimate distance and speed.
2
Relate these visual characteristics to driver perception and junction safety.
The smaller surface area can create an optical illusion that the rider is farther away and approaching more slowly.
Recognising this limitation is critical under UK driving standards to prevent drivers from pulling out across a motorcyclist's path.

Anahtar Kavram

Visual perception and approach speed estimation of motorcyclists at junctions
Tahmini Süre:45s
Soru 1407Soru →

Traffic is moving slowly on an ungritted rural road that has frozen overnight. By how much can your stopping distance increase on this icy surface compared to normal dry conditions?

Cevabı ve açıklamayı göster

Cevap: Up to ten times as far

Cevap

Stopping distances on ice can be up to ten times greater than on a dry road.
The correct answer is that stopping distances can increase by up to ten times on icy roads. Ice and compacted snow drastically reduce tyre grip on the road surface, meaning a vehicle requires vastly more distance to come to a complete stop compared to dry conditions.

Adım Adım Çözüm

1
Identify the specific road hazard described in the question
The road surface is covered in ice and freezing conditions
Recognising the severe hazard is necessary to determine the appropriate driving safety margins.
2
Apply the official Highway Code stopping distance multiplier for ice and snow
Stopping distance on ice can increase by up to ten times compared to normal dry conditions
Severe loss of tyre grip dramatically extends the braking distance required to bring the vehicle to a stop.
3
Select the answer option matching this Highway Code rule
Up to ten times as far
Drivers must leave at least ten times the normal separation distance to avoid collisions on icy surfaces.

Anahtar Kavram

Stopping Distances in Ice and Snow
Tahmini Süre:45s
Soru 1408Soru →

You are driving along a major road and intend to turn right into a side road. Traffic is approaching from the opposite direction, and pedestrians are waiting to cross the mouth of the junction. Which TWO actions must you take before completing your turn?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Wait near the centre line for a safe gap in oncoming traffic, giving priority to pedestrians crossing the side road; Check mirrors and blind spots for approaching cyclists or motorcyclists filtering alongside before turning

Cevap

Wait near the centre line for a safe gap in oncoming traffic while giving priority to pedestrians crossing the side road, and check mirrors and blind spots for filtering cyclists or motorcyclists before turning.
When turning right into a side road, drivers must hold their position near the centre line until there is a safe gap in oncoming traffic. Under Highway Code Rule H2 and Rule 170, drivers must give way to pedestrians crossing or waiting to cross the side road into which you are turning. Furthermore, comprehensive mirror and blind spot checks are mandatory to check for filtering cyclists or motorcyclists who may be passing before you cross the oncoming lane.

Adım Adım Çözüm

1
Position the vehicle correctly near the centre line of the major road and assess oncoming traffic and junction hazards.
The vehicle is positioned safely without obstructing following traffic unnecessarily, keeping oncoming lanes in full view.
Proper positioning indicates your intention to other road users and allows vehicles behind to pass on the left if space permits.
2
Perform thorough observations for vulnerable road users, including pedestrians at the junction mouth and filtering two-wheelers.
Comprehensive awareness of pedestrians crossing the side road and cyclists or motorcyclists in your blind spots.
Highway Code Rule H2 establishes that pedestrians crossing or waiting to cross a junction have priority, while filtering cyclists and motorcyclists may be hidden from mirror view.
3
Complete the turn only when a safe gap opens and the entrance is clear, taking a proper turning arc into the correct lane.
A controlled, safe manoeuvre that avoids conflicting with oncoming or emerging traffic.
Cutting the corner encroaches on the oncoming lane of the side road and endangers emerging traffic, particularly larger vehicles that need wider turning sweeps.

Anahtar Kavram

Right-Turn Junction Priority, Vulnerable Road User Hierarchy, and Blind Spot Observations
Tahmini Süre:1m 30s
Soru 1409Soru →

You are driving a car on a road that has a central reservation dividing the opposing lanes of traffic, with no street lighting or repeater signs present. What is the maximum legal speed limit for your vehicle on this road?

Cevabı ve açıklamayı göster

Cevap: 70 mph

Cevap

70 mph
A road divided by a central reservation is a dual carriageway. For cars and motorcycles not towing a trailer, the national speed limit on dual carriageways is 70 mph unless signs indicate a different restriction.

Adım Adım Çözüm

1
Identify the road classification from the physical infrastructure described.
A road with a physical central reservation dividing opposing carriageways is classified as a dual carriageway.
The presence of a central divider defines a dual carriageway regardless of the number of lanes in each direction.
2
Determine the applicable national speed limit for a standard passenger car.
The national speed limit for a solo passenger car on a dual carriageway is 70 mph.
Where no lower limit signs or street lights dictate otherwise, standard national limits apply.

Anahtar Kavram

National speed limits for passenger cars on dual carriageways
Soru 1410Soru →

During a routine journey, a driver frequently leaves the vehicle in neutral while rolling towards red traffic lights. What are TWO hazardous outcomes of this driving habit? (Select TWO answers)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Engine resistance cannot assist in retarding the vehicle's momentum; The footbrake components are subjected to greater stress and risk overheating

Cevap

Engine resistance cannot assist in retarding the vehicle's momentum, and the footbrake components are subjected to greater stress and risk overheating.
Coasting in neutral disengages the powertrain from the driven wheels, eliminating engine braking. Consequently, the driver must rely entirely on the footbrake, which increases mechanical wear, elevates brake temperatures, and can lead to brake fade during repeated or prolonged braking.

Adım Adım Çözüm

1
Analyze the mechanical state of the powertrain during neutral coasting
The engine is decoupled from the drive wheels, removing natural powertrain drag.
Understanding power delivery and deceleration mechanics determines why control is compromised.
2
Evaluate the demands placed upon the braking system
All deceleration force must be generated solely by the disc and drum friction brakes.
Prolonged reliance on friction brakes generates excessive heat and increases stopping distances.
3
Examine common misconceptions regarding electronic assists and fuel economy
Coasting does not disengage electronic stability programs, nor does it cut fuel flow entirely.
Electronic safety systems remain powered, and idling in neutral consumes fuel to maintain engine revs.

Anahtar Kavram

Hazards of coasting and the role of engine braking in vehicle management
Tahmini Süre:1m 0s
Soru 1411Soru →

You are driving towards a Puffin crossing on a multi-lane road. A pedestrian pushes the control button at the kerb but then crosses the road safely while traffic is clear before the light sequence changes. What will happen to the traffic signals as you approach?

Cevabı ve açıklamayı göster

Cevap: The infra-red and motion sensors will detect that the crossing area is empty and cancel the request, keeping the signal green for vehicles.

Cevap

The infra-red and motion sensors will detect that the crossing area is empty and cancel the request, keeping the signal green for vehicles.
Puffin crossings are equipped with electronic (infra-red and microwave) sensors that monitor the waiting area at the kerb and the crossing path. If someone pushes the button and then walks away or crosses while the road is clear, the system detects that the area is empty and automatically cancels the pedestrian demand, leaving the traffic light green so traffic is not delayed.

Adım Adım Çözüm

1
Identify the crossing archetype and its operational technology.
The scenario specifies a Puffin crossing (Pedestrian User-Friendly Intelligent crossing), which employs kerbside detectors and on-crossing sensors rather than fixed timers.
Different crossing types (Pelican, Puffin, Toucan, Pegasus, Zebra) have distinct signal cycles and detection mechanisms under UK road regulations.
2
Analyze sensor response to pedestrian departure.
When the pedestrian leaves the waiting area before the traffic lights transition from green to red, the detectors recognize that no pedestrians are waiting or traversing the crossing.
The core function of Puffin crossing sensors is to optimize traffic flow by automatically cancelling redundant demands.
3
Determine the resulting signal status and correct driver expectation.
The crossing demand is cancelled, so the traffic lights remain steady green without unnecessary delay.
Vehicles are not brought to an unnecessary halt when no pedestrian requires safe passage.

Anahtar Kavram

Puffin crossing dynamic sensor operations and automated request cancellation
Tahmini Süre:1m 0s
Soru 1412Soru →

Poor atmospheric conditions require drivers to adapt their vehicle controls and sensory checks to maintain safety. Match each poor visibility challenge with the appropriate driving response according to the Highway Code.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Approaching an obscured junction with zero cross-visibility
Driving when forward sight falls below 100 metres (328 feet)
Emerging from a foggy patch into clearer road conditions
Travelling behind another moving vehicle in thick fog

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Approaching an obscured junction with zero cross-visibility pairs with stopping, lowering windows, and listening for traffic; forward sight falling below 100 metres pairs with activating dipped headlights and fog lights; emerging into clearer conditions pairs with extinguishing fog lights; travelling behind another moving vehicle in thick fog pairs with extending separation distance and avoiding tail-light fixation.
Each driving situation corresponds directly to established UK Highway Code standards: junction emergence requires supplementary auditory checks; sight below 100 metres warrants fog lamps with dipped beams; clearing conditions mandate turning off high-intensity lamps; and trailing other traffic requires wide separation margins rather than tail-light tracking.

Adım Adım Çözüm

1
Identify the junction safety procedure in dense fog
Matched with opening windows to listen for approaching traffic
When physical sightlines are completely blocked by fog, auditory checks provide critical hazard detection before pulling out.
2
Apply the statutory visibility threshold for auxiliary fog lamps
Matched with activating dipped headlights and fog lights when visibility is under 100 metres
Highway Code Rule 226 specifies 100 metres (328 feet) as the defining criteria for seriously reduced visibility.
3
Identify the regulatory obligation when weather conditions improve
Matched with turning off fog lights to prevent dazzle
Highway Code Rule 236 requires turning off fog lights when visibility clears so brake lights remain clearly distinguishable and following drivers are not blinded.
4
Determine safe following discipline in low visibility
Matched with increasing following distance and avoiding fixation on rear lamps
Highway Code Rule 235 cautions that following tail lights can lead to driving too fast and too close.

Anahtar Kavram

Vehicle control and regulatory compliance in fog (Highway Code Rules 226-236)
Tahmini Süre:1m 0s
Soru 1413Soru →

You are approaching a multi-lane roundabout intending to take the third exit to turn right. Ahead of you, an articulated lorry is signalling right but has positioned itself in the left-hand lane on approach to manage its turning circle. What is the correct lane positioning and procedure to follow?

Cevabı ve açıklamayı göster

Cevap: Hold back in the right-hand lane well behind the lorry and give it sufficient room to complete its turn.

Cevap

Hold back in the right-hand lane well behind the lorry and give it sufficient room to complete its turn.
Long articulated vehicles need extra space to turn and frequently straddle or swing out into adjacent lanes to prevent their rear wheels from mounting the kerb or central island. The correct action is to remain in your approach lane but hold well back behind the vehicle, avoiding pulling up alongside it where you could be crushed by the trailer or hidden in blind spots.

Adım Adım Çözüm

1
Assess intended direction and standard lane positioning rules
Identified that turning right at a roundabout generally requires approach and entry via the right-hand lane.
Highway Code Rule 186 dictates using the right-hand lane when taking an exit to the right, unless road markings direct otherwise.
2
Evaluate the specific road hazard and vehicle dynamics ahead
Recognised that the articulated lorry requires extra road space and will sweep across multiple lanes to complete a right turn.
Long vehicles have a large turning circle and extensive blind spots, causing their trailers to cut corners (off-tracking) across adjacent lanes.
3
Select safe positioning and approach speed
Remain in the right-hand lane but stay well back, yielding the necessary road space without entering the lorry's swept path or blind spots.
Highway Code Rules 187 and 221 advise drivers not to pull up alongside or overtake long vehicles negotiating roundabouts or junctions.

Anahtar Kavram

Lane positioning and spacing around long articulated vehicles at multi-lane junctions and roundabouts
Tahmini Süre:1m 15s
Soru 1414Soru →

You are driving in the left-hand lane of a multi-lane dual carriageway in heavy, slow-moving traffic. The queue of vehicles in the right-hand lane slows down further and begins moving more slowly than your lane. Which action should you take?

Cevabı ve açıklamayı göster

Cevap: Stay in your lane and pass the slower-moving queue on the left with caution

Cevap

Stay in your lane and pass the slower-moving queue on the left with caution
Under Highway Code Rule 163, although you should normally overtake on the right, you may pass on the left when traffic is moving in slow queues and the queue in the lane to your right is moving more slowly than your lane. You should remain in your lane and proceed with caution.

Adım Adım Çözüm

1
Assess the traffic flow and road conditions
Identify that traffic is travelling in congested, slow-moving queues across multiple lanes.
General rules usually prohibit passing on the left (undertaking), but specific legal exceptions exist for queuing traffic.
2
Apply Highway Code Rule 163 regarding passing on the left
Determine that vehicles in the left lane may legally keep their position and pass slower-moving queues on the right.
In slow-moving queues where the right lane moves slower than the left lane, drivers are permitted to pass on the left with caution rather than making disruptive lane changes.

Anahtar Kavram

Highway Code Rule 163 allows drivers in slow-moving, congested traffic queues to pass on the left when the queue to their right is moving more slowly.
Tahmini Süre:1m 0s
Soru 1415Soru →

When a pedestrian activates the push-button unit at a puffin crossing, the traffic lights cycle through a set sequence. Arrange the four light signals in the correct order as displayed to approaching drivers, starting immediately after the initial steady green light ends.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence for a puffin crossing is: Steady amber alone, followed by steady red alone, followed by red and amber together, and finally steady green alone.
At a puffin crossing, the lights follow the standard UK traffic signal sequence: steady amber warns drivers to stop, steady red commands vehicles to stop, red and amber together alert drivers to prepare, and steady green permits traffic to proceed if clear.

Adım Adım Çözüm

1
Identify the initial stopping warning phase.
The steady amber light illuminates alone.
When the sensor system prepares to stop traffic, the green light changes first to steady amber to give drivers time to stop safely.
2
Identify the mandatory stop phase.
The steady red light illuminates alone.
Traffic must come to a complete stop while pedestrians receive the crossing signal and cross the road.
3
Identify the preparation phase before traffic moves.
Red and amber illuminate together.
Unlike pelican crossings which have a flashing amber light, puffin crossings follow the standard UK traffic light sequence by showing red and amber together.
4
Identify the phase that permits vehicles to move.
The steady green light illuminates alone.
Vehicles may now proceed through the crossing, provided the road ahead and crossing are completely clear.

Anahtar Kavram

Puffin crossing traffic light sequence follows standard UK traffic signals with no flashing amber phase.
Tahmini Süre:45s
Soru 1416Soru →

You are driving behind a motorcyclist on a road that has loose chippings due to recent maintenance. Which TWO precautions should you take?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Increase your following distance to avoid flying debris and give extra braking room; Allow the rider extra room to change their road position to avoid unstable surface patches

Cevap

Increase your following distance to avoid flying debris and give extra braking room, and allow the rider extra room to change their road position to avoid unstable surface patches.
Loose chippings significantly reduce traction for two-wheeled vehicles and can easily cause instability. Drivers following a motorcyclist must drop back to increase their stopping distance and avoid thrown stone chips, while giving the rider ample space to adjust their line around piles of loose gravel.

Adım Adım Çözüm

1
Assess the effect of loose chippings on two-wheeled vehicles
Loose surfaces reduce tyre grip and stability, requiring motorcyclists to alter speed and steering lines to maintain balance.
Two-wheeled vehicles are much more susceptible to skidding and losing control on gravel or loose stones than four-wheeled vehicles.
2
Determine the necessary adjustments to following distance and lateral positioning
Drop back to extend the safety gap and leave generous lateral clearance for unexpected course corrections.
A greater separation distance reduces the hazard of thrown gravel and ensures sufficient reaction time if the rider slips or slows.

Anahtar Kavram

Adjusting safety margins and anticipating balance hazards when following motorcyclists on loose or degraded road surfaces.
Tahmini Süre:1m 0s
Soru 1417Soru →

Drivers sharing the road with passenger transport must correctly interpret dedicated road markings, regulatory signs, and warning signals. Match each bus-related sign or marking to its correct legal restriction or driver requirement.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Blue rectangular bus lane sign showing a bus symbol with the word 'Local'
Continuous solid white line along the outer edge of a with-flow bus lane
Yellow road markings at a bus stop accompanied by a clearway sign
Flashing twin amber lights mounted on the rear of a school transport bus

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

The correct pairings connect each bus sign or marking with its precise legal meaning: 'Local' signage reserves the lane for local scheduled services only; a solid white line prevents general vehicles from entering during operating hours; bus stop clearway markings forbid any stopping or waiting; and rear flashing amber lights on a school bus warn of boarding children who may cross.
Each pair correctly matches official UK traffic signs and road markings to their specific legal rules: 'Local' bus lane signs exclude long-distance coaches; solid white lines prohibit general traffic entry during operating hours; bus stop clearways legally forbid any stopping or waiting; and flashing twin amber lights on a school bus signal that children are boarding or alighting and may cross into the road.

Adım Adım Çözüm

1
Interpret the meaning of the word 'Local' beneath a bus lane symbol.
Identify that 'Local' limits usage to registered local public transit and explicitly excludes touring coaches.
Highway Code Rule 141 and traffic sign regulations state that non-local buses and coaches cannot use lanes marked 'Local'.
2
Determine the legal significance of a solid white boundary line on a bus lane.
Recognise that general traffic must not cross a solid white line during operational hours.
Solid lines signify a mandatory demarcation line that restricts unauthorised vehicle entry.
3
Assess the restriction imposed by a bus stop clearway sign and road markings.
Conclude that no stopping, waiting, or parking is permitted for unauthorized vehicles.
Clearways keep bus stops unobstructed so buses can pull up parallel to the kerb safely.
4
Identify the hazard indicated by flashing twin amber lights on a school transport vehicle.
Anticipate young pedestrians stepping into the road near the stationary bus.
School bus warning lights signal active boarding or alighting of school children.

Anahtar Kavram

Highway Code regulations and hazard perception regarding bus lanes, bus stops, and passenger transport vehicles
Tahmini Süre:1m 0s
Soru 1418Soru →

On a dual carriageway, you are permitted to stay in the right-hand lane continuously as long as you are driving at the maximum legal speed limit.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false because UK traffic rules mandate that you must always drive in the left-hand lane when the road ahead is clear. The right-hand lane is meant solely for overtaking or turning right, and drivers must return to the left lane once safe to do so, regardless of their travel speed.

Adım Adım Çözüm

1
Identify the standard rule of lane discipline on UK dual carriageways.
Drivers must keep to the left-hand lane during normal driving whenever it is clear.
Highway Code Rule 137 establishes the left-hand lane as the primary driving lane on multi-lane roads.
2
Evaluate whether driving at the speed limit permits remaining in the overtaking lane.
Driving at the maximum speed limit does not give permission to cruise in the right-hand lane.
The right-hand lane is designated strictly for overtaking slower vehicles or preparing to turn right, after which the driver must return to the left.

Anahtar Kavram

Standard UK lane discipline requires all vehicles to stay in the left-hand lane unless overtaking or turning right, regardless of vehicle speed.
Tahmini Süre:30s
Soru 1419Soru →

You are driving on a motorway at night in poor visibility when your vehicle breaks down. You manage to bring the car to a halt as far to the left as possible on the hard shoulder. Which TWO actions should you carry out to secure the vehicle and warn other road users before exiting?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Turn the steering wheel so that the front wheels point towards the left verge; Switch on the hazard warning lights and leave the sidelights illuminated

Cevap

Turn the steering wheel so that the front wheels point towards the left verge, and switch on the hazard warning lights and leave the sidelights illuminated.
According to Rule 274 of The Highway Code, when breaking down on a motorway hard shoulder in poor visibility or at night, drivers must switch on hazard warning lights and leave sidelights on to make the stationary vehicle visible. Steering the wheels to the left ensures that any collision from behind will shove the vehicle safely onto the verge rather than into live motorway lanes.

Adım Adım Çözüm

1
Angle the steering direction to the left verge
Vehicle wheels are pointed away from the carriageway
If another vehicle collides with the back of the stationary car, the impact pushes it into the verge instead of into active traffic lanes.
2
Activate emergency warning lights and position lights
Hazard lights flash and sidelights remain on
Rule 274 of The Highway Code requires hazard warning lights and sidelights when stopped in darkness or poor visibility to ensure oncoming traffic sees the hazard.

Anahtar Kavram

Motorway breakdown safety protocol, vehicle positioning, and lighting requirements under Highway Code Rule 274
Tahmini Süre:1m 0s
Soru 1420Soru →

You are driving on a dual carriageway approaching a multi-lane roundabout, intending to take the first exit to the left. The road markings indicate that the left-hand lane is for turning left, and the right-hand lane is for proceeding straight ahead or turning right. Ahead of you, an articulated Large Goods Vehicle (LGV) is positioned in the right-hand lane, but its left indicator is flashing. The left-hand lane is currently completely clear. What is the safest and most appropriate application of lane discipline and positioning in this situation?

Cevabı ve açıklamayı göster

Cevap: Remain well back in the left-hand lane and allow the LGV plenty of room to negotiate the turn, as it will likely need to swing across your lane.

Cevap

Remain well back in the left-hand lane and allow the LGV plenty of room to negotiate the turn, as it will likely need to swing across your lane.
Large Goods Vehicles (LGVs) have a wide turning circle and long trailers that 'cut in' during tight turns. To avoid mounting the left-hand kerb at a roundabout, they often approach from the right-hand lane before turning left. The correct procedure is to maintain lane discipline by staying in the left lane, but hanging well back to give them the space they need, rather than risking being crushed by passing on the inside.

Adım Adım Çözüm

1
Analyze the hazard presented by the LGV's positioning and indicator.
Identify that the LGV is in the right lane but indicating left.
Large vehicles often require extra space to negotiate tight turns and may deliberately straddle or use incorrect lanes to prevent their rear wheels from mounting the kerb.
2
Assess the risk of proceeding in the clear left-hand lane.
Determine that driving into the left lane beside the LGV places you directly in its blind spot and turning path.
Passing on the inside of a turning LGV is extremely dangerous because the trailer will cut heavily across the left lane.
3
Determine the safest positioning for your vehicle.
Decide to stay well back in the left-hand lane.
Holding back provides the LGV the necessary room to complete its turn safely without trapping or crushing your vehicle.

Anahtar Kavram

Lane discipline and safety margins around large goods vehicles at complex junctions.
Tahmini Süre:1m 15s
ÖncekiSayfa 71 / 95Sonraki
Tüm alıştırma soruları — UK Driving Theory Test | Examkin