Examkin

Tüm alıştırma soruları

1884 soru

Tüm türler1,884Çoktan seçmeli962Çoklu seçim84Doğru / Yanlış379Sayısal32Eşleştirme249Sıralama178
Soru 1441Soru →

You are driving behind an articulated Large Goods Vehicle (LGV) on a single-carriageway road. The lorry indicates left to enter a narrow commercial entrance, but the driver steers towards the centre line before making the turn. In what sequence should you carry out the following actions to manage this situation safely?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

Check your mirrors to assess following traffic, ease off the accelerator to drop back into the lorry driver's mirror view, hold your position behind without attempting to pass on the left, and proceed only once the lorry has fully completed its turn and the road is clear.
When following a long vehicle turning into a narrow entrance, standard defensive driving requires checking mirrors first to monitor following traffic, increasing separation distance to remain visible in the lorry's mirrors, waiting patiently behind while the trailer completes its sweeping arc, and proceeding only when the road ahead is completely clear.

Adım Adım Çözüm

1
Check interior and door mirrors.
Full situational awareness of following road users before adjusting speed.
Applying the Mirrors-Signal-Manoeuvre routine ensures you do not surprise trailing vehicles when you begin slowing down.
2
Drop well back by easing off the accelerator.
Expanded forward visibility and positioning outside the LGV's immediate blind spots.
Large vehicles block forward view; hanging back ensures the lorry driver can see you in their side mirrors and gives you a safety buffer.
3
Hold back patiently behind the turning vehicle.
Avoidance of the dangerous nearside blind spot and trailer swept path.
When an LGV swings right to turn left, the gap on the left is deceptive; the trailer will track tightly across that space as the vehicle turns.
4
Proceed once the manoeuvre is finished and the road is clear.
Safe continuation of your journey without risk of collision.
Long articulated vehicles take considerable time to complete tight turns and clear the carriageway.

Anahtar Kavram

Handling Large Goods Vehicles (LGVs) negotiating tight turns and understanding the swept path / off-tracking of long articulated trailers.
Tahmini Süre:1m 0s
Soru 1442Soru →

Daytime running lights provide sufficient illumination when driving through dense fog during daylight hours because they automatically illuminate both the front and rear of the vehicle to standard headlight intensity.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is False.
The statement is false because Highway Code Rule 226 requires drivers to switch on dipped headlights whenever visibility drops to 100 metres or less. Daytime running lights are not a substitute for headlights in dense fog because they do not project a focused beam to penetrate murky air and typically do not illuminate the rear tail lamps, leaving the vehicle unlit from behind.

Adım Adım Çözüm

1
Identify the legal lighting obligations for poor visibility under UK traffic regulations.
Highway Code Rule 226 specifies that drivers must use dipped headlights when visibility is seriously reduced, defined generally as 100 metres (328 feet) or less.
Establishing the minimum legal threshold is necessary to evaluate the adequacy of any lighting system.
2
Examine the technical capabilities and lighting distribution of daytime running lights.
Daytime running lights illuminate only the front of the vehicle at low intensity and leave the rear lamps unlit on the vast majority of cars.
Determining whether daytime running lights fulfil both front and rear visibility requirements reveals whether the claim in the statement holds true.
3
Compare daytime running light performance against fog driving requirements.
Relying on daytime running lights in dense fog is legally non-compliant and leaves the vehicle invisible from behind, confirming the statement is incorrect.
A direct comparison resolves the truth value of the statement.

Anahtar Kavram

Highway Code Rule 226 mandates the use of dipped headlights when visibility falls below 100 metres, as daytime running lights do not provide adequate forward beam spread and leave the rear of the vehicle unlit.
Tahmini Süre:45s
Soru 1443Soru →

You are driving along a single carriageway and intend to turn right into a side road that has a marked central right-turn filter lane. Arrange the following driver actions in the correct sequential order.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

First check interior and right door mirrors, signal right in good time, guide the vehicle smoothly into the central filter lane, and wait safely for a gap in oncoming traffic before completing the turn.
Correct lane discipline and positioning follows the standard Mirror-Signal-Manoeuvre (MSPSL) routine. First, check mirrors to assess traffic behind and offside. Second, signal right in good time to communicate your intention. Third, position your vehicle smoothly into the dedicated right-turn filter lane so through traffic can proceed. Finally, wait in the filter lane until oncoming traffic has cleared before making the turn.

Adım Adım Çözüm

1
Check the interior and offside door mirrors.
Assesses the speed and proximity of traffic behind, particularly overtaking vehicles or motorcyclists.
The Highway Code requires the Mirror-Signal-Manoeuvre (MSPSL) routine before changing direction or position.
2
Apply the right-turn indicator.
Gives clear notice of your intention to move into the central turning lane.
Signalling in good time allows other road users to anticipate your lane change.
3
Steer into the designated right-turn filter lane.
Moves the vehicle into the central holding pocket, allowing through traffic to continue on the left.
Correct positioning keeps the main carriageway clear and prevents traffic congestion.
4
Hold position and wait for a safe gap in oncoming traffic.
Allows oncoming traffic with priority to pass safely before you cross their lane.
Vehicles turning right across oncoming traffic must give priority unless instructed otherwise by priority signals.

Anahtar Kavram

Applying the Mirror-Signal-Manoeuvre (MSPSL) routine for safe positioning into dedicated turning lanes
Tahmini Süre:45s
Soru 1444Soru →

When driving a standard passenger car on an unlit single carriageway road without any posted speed limit signs, what is the maximum legal speed limit?

Cevabı ve açıklamayı göster

Cevap: 60 mph

Cevap

60 mph
For a standard car driving on a single carriageway road without street lighting or specific signage, the national speed limit is 60 mph.

Adım Adım Çözüm

1
Identify the vehicle type and road classification
The vehicle is a solo passenger car and the road is an unlit single carriageway without street lights.
National speed limits in Great Britain vary according to the classification of the road and the type of vehicle being driven.
2
Apply the UK Highway Code national speed limit rules
The national speed limit for standard cars on a single carriageway is 60 mph.
Under the Highway Code, when no lower speed limits are signposted and there is no system of street lighting, the national limit for cars on single carriageways is 60 mph (compared to 70 mph on dual carriageways and motorways).

Anahtar Kavram

National speed limits for cars on single carriageway roads
Tahmini Süre:45s
Soru 1445Soru →

You are approaching a traffic-light controlled junction that has an Advanced Stop Line (ASL) marked on the road surface for cyclists. The traffic lights change to red as you approach. Which TWO actions must you take?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Stop before the first stop line if it is safe to do so, leaving the cycle reservoir clear.; Allow sufficient time and space for cyclists in the marked area to move off when the green signal shows.

Cevap

You must stop before the first stop line if safe to do so to keep the cycle box clear, and allow time and space for cyclists to move off when the green light shows.
According to Highway Code Rule 178, drivers must stop at the first white line when traffic signals show red or amber, preserving the marked reservoir area for cyclists. When the traffic signal turns green, drivers must remain patient and allow any cyclists in the reservoir sufficient space and time to safely move off before proceeding.

Adım Adım Çözüm

1
Identify the road markings and current traffic signal status on approach.
Recognise the Advanced Stop Line (ASL) cycle reservoir and the red signal.
Advanced Stop Lines create a dedicated safety zone to position vulnerable cyclists ahead of motor traffic at signal-controlled junctions.
2
Determine the correct stopping position before the junction.
Bring the vehicle to a halt behind the first white stop line.
Highway Code Rule 178 prohibits motor vehicles from crossing the first stop line when the lights are red or amber unless stopping safely is impossible.
3
Plan the move-off procedure when the signal changes to green.
Wait and provide ample clearance for cyclists inside the reservoir to move away.
Cyclists need adequate time and room to establish their road position and build momentum without being crowded or intimidated.

Anahtar Kavram

Advanced Stop Lines (ASLs) and cyclist safety at signal-controlled junctions
Tahmini Süre:1m 0s
Soru 1446Soru →

You are approaching an unmarked crossroads where there are no traffic signs or road markings. What should you do regarding priority?

Cevabı ve açıklamayı göster

Cevap: Slow down, scan in all directions, and prepare to stop because no vehicle has priority

Cevap

Slow down, scan in all directions, and prepare to stop because no vehicle has priority.
At an unmarked crossroads, no individual vehicle or road has priority. According to the Highway Code, drivers must approach with caution, scan thoroughly in all directions, and be prepared to yield or stop to avoid collisions.

Adım Adım Çözüm

1
Assess the junction configuration upon approach
Identify that the crossroads has no Give Way signs, Stop signs, or road markings indicating a major or minor road.
Recognising an unmarked junction establishes that standard priority rules do not give any vehicle the right of way.
2
Reduce speed and prepare to stop if necessary
Vehicle approaches at a controlled, safe speed allowing time to react to approaching traffic from all directions.
Approaching cautiously ensures you can stop safely should another vehicle emerge across your path.
3
Conduct thorough observations to the left, right, and ahead
Confirm whether other road users are approaching and negotiate safe passage before proceeding.
Full scanning ensures no traffic or vulnerable road users are overlooked in blind spots or side approaches.

Anahtar Kavram

Unmarked junction priority and observation
Tahmini Süre:45s
Soru 1447Soru →

You are driving on a standard roundabout and intend to leave at an intermediate exit straight ahead. When should you indicate to let other road users know that you are leaving?

Cevabı ve açıklamayı göster

Cevap: Signal left after you have passed the exit immediately before the one you want

Cevap

Signal left after you have passed the exit immediately before the one you want
When taking an intermediate exit (such as going straight ahead at a roundabout), you normally approach without signalling, stay in the appropriate lane, and indicate left immediately after passing the exit just prior to your destination exit.

Adım Adım Çözüm

1
Approach the roundabout without indicating when taking an intermediate exit straight ahead
Avoids confusing road users into thinking you are taking the first exit
Highway Code Rule 186 states that when taking any intermediate exit, you should not signal on approach unless required by lane markings.
2
Maintain lane position and scan for traffic while navigating the circulatory carriageway
Maintains vehicle control and situational awareness
Allows safe progression around the roundabout while monitoring vulnerable road users and adjacent lanes.
3
Check mirrors, look into the nearside blind spot, and indicate left immediately after passing the exit prior to the intended exit
Gives clear, timely warning to traffic behind and vehicles waiting to join at the next entrance
Highway Code Rule 186 requires signalling left after passing the exit before the one you intend to leave by.

Anahtar Kavram

Signalling routine for intermediate exits on roundabouts
Tahmini Süre:45s
Soru 1448Soru →

You are driving towards a pelican crossing when the signal changes to flashing amber. What must you do if pedestrians are still on the crossing?

Cevabı ve açıklamayı göster

Cevap: Give way to the pedestrians and wait until they have safely cleared the crossing

Cevap

Give way to the pedestrians and wait until they have safely cleared the crossing.
At a pelican crossing, the flashing amber phase means you must give way to any pedestrians who are already on the crossing. Once they have completely crossed to safety and the road is clear, you may proceed without waiting for a green light.

Adım Adım Çözüm

1
Identify the type of crossing and the signal displayed.
The crossing is a pelican crossing displaying a flashing amber light.
Different crossings have different signal sequences and operational rules.
2
Recall the legal rule for flashing amber at a pelican crossing.
Flashing amber requires giving way to pedestrians already on the crossing, but allows proceeding if the crossing is completely clear.
Rule 196 of the UK Highway Code specifies priority during the flashing amber phase.
3
Apply the rule to the scenario where pedestrians are still crossing.
Wait patiently and allow the pedestrians to finish crossing before driving forward.
Pedestrians on the crossing have absolute priority during the flashing amber phase.

Anahtar Kavram

Pelican crossing signal rules and flashing amber meaning
Tahmini Süre:30s
Soru 1449Soru →

You are driving along a single-carriageway road and approaching a staggered junction indicated by warning signs. Which TWO actions should you take to safely manage the hazards at this intersection?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Scan both the left and right side roads well in advance for emerging vehicles; Check your mirrors and adjust your speed so you can stop safely if another road user pulls out

Cevap

Scanning both the left and right side roads well in advance and checking your mirrors while moderating speed to allow for safe stopping.
When approaching a staggered junction, traffic can emerge from either the left or the right side roads at different points. Safe driving requires scanning both side roads in advance to anticipate emerging vehicles, as well as checking mirrors and moderating speed to maintain a safe stopping buffer.

Adım Adım Çözüm

1
Observe the road layout ahead and assess both offset junction mouths
Early identification of potential conflict points where traffic may cross or join the main carriageway
Staggered junctions present hazards from two separate directions in close proximity.
2
Check rear-view and side mirrors, then moderate speed defensively
Creation of an adequate safety margin to react and stop if an emerging vehicle pulls out unexpectedly
Maintaining awareness of trailing traffic ensures you can brake progressively without creating a rear-end hazard.

Anahtar Kavram

Hazard anticipation and defensive positioning when approaching staggered intersections
Tahmini Süre:1m 0s
Soru 1450Soru →

Safe vehicle handling in poor atmospheric conditions requires drivers to correctly adjust auxiliary controls and lighting according to legal rules and changing visibility. Match each fog-related driving condition with the correct driver action required by the Highway Code.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Driving on an unlit road where fog reduces forward visibility to 70 metres
Driving through a patch where fog thins out and visibility extends beyond 100 metres
Driving in cold, damp fog causing rapid misting across the inner surface of the windscreen
Driving in dark, foggy conditions where forward view is limited

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Match the condition of visibility below 100 metres with activating high-intensity fog lights and dipped headlights; match visibility clearing beyond 100 metres with switching off fog lights; match internal condensation with setting the windscreen demister and climate controls; and match navigating in dark fog with using dipped beam instead of main beam.
Each scenario directly aligns with the UK Highway Code guidance for fog: visibility under 100 metres warrants fog light activation with dipped beam; clearing conditions mandate turning fog lights off to prevent dazzling; interior misting requires active demisting controls; and driving through fog at night requires dipped headlights to prevent reflected glare.

Adım Adım Çözüm

1
Identify the statutory visibility threshold for high-intensity fog lights
70 metres is under the 100-metre threshold, legally permitting and requiring the use of fog lights alongside dipped headlights.
The Highway Code sets 100 metres (328 feet) as the defining threshold for seriously reduced visibility.
2
Determine the mandatory procedure when visibility improves beyond 100 metres
Fog lights must be extinguished promptly.
Bright rear fog lights mask brake light activation and dazzle motorists travelling behind.
3
Identify correct vehicle auxiliary management for internal windscreen fogging
Demister and air conditioning systems should be activated to dehumidify and clear the windscreen.
Maintaining clear glass prevents driver distraction and preserves the available visual field.
4
Select the appropriate headlight beam setting for driving in fog
Dipped beam must be selected instead of main beam.
Main beam reflects off airborne moisture droplets directly back into the driver's eyes.

Anahtar Kavram

Highway Code rules on lighting selection, visibility thresholds (Rule 226/236), and demister control during foggy conditions
Tahmini Süre:1m 15s
Soru 1451Soru →

You are driving along a residential street and intend to turn left at an upcoming T-junction. In what sequence should you carry out the following actions according to the standard Mirror-Signal-Manoeuvre (MSM) routine?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence follows the Mirror-Signal-Manoeuvre (MSM/PSL) routine: First check the interior and left door mirrors, then apply the left indicator signal in good time, next adjust position and reduce speed, and finally look in all directions before completing the turn.
The UK Highway Code requires drivers to apply the Mirror-Signal-Manoeuvre (MSM) routine on approach to every junction. Checking mirrors first ensures you know what is around you; signalling communicates your intention; adjusting position and speed prepares the vehicle; and observing thoroughly at the junction ensures it is safe to proceed.

Adım Adım Çözüm

1
Check the interior mirror and the left door mirror.
You obtain an up-to-date awareness of any vehicles, cyclists, or motorcyclists behind or beside you.
Observations must always precede any signal or change of speed/direction.
2
Indicate left clearly and in good time.
Following and oncoming road users are given sufficient notice of your intended turn.
Clear communication helps prevent conflicts and gives other drivers time to react.
3
Adopt the correct lane position and decelerate smoothly.
Your vehicle slows down safely and is correctly aligned for the corner.
Reducing speed and selecting the appropriate gear ensures full vehicle control before entering the junction.
4
Perform final observations (Look) and complete the turn.
You enter the new road safely without impeding priority traffic or pedestrians crossing the mouth of the junction.
The final check confirms the path is completely clear before completing the manoeuvre.

Anahtar Kavram

Application of the Mirror-Signal-Manoeuvre (MSM) routine when approaching junctions.
Tahmini Süre:45s
Soru 1452Soru →

You are approaching a Pelican crossing that runs straight across the road with a central refuge island. As you draw near, the traffic lights change to flashing amber while a pedestrian is walking past the central island towards the far pavement. Which action should you take?

Cevabı ve açıklamayı göster

Cevap: Wait at the stop line and give way until the pedestrian has completely cleared the crossing

Cevap

Wait at the stop line and give way until the pedestrian has completely cleared the crossing.
According to the Highway Code (Rule 197), when a Pelican crossing goes straight across the road with a central island, it is treated as one single continuous crossing. During the flashing amber phase, drivers must give way to any pedestrian on the crossing and remain stationary behind the stop line until the pedestrian has completely stepped onto the opposite pavement.

Adım Adım Çözüm

1
Identify the crossing type, geometry, and active signal phase
The crossing is a straight-across Pelican crossing with a central refuge island operating under a flashing amber signal.
Different crossing types and layouts dictate specific legal obligations regarding pedestrian priority.
2
Apply Highway Code Rule 197 regarding straight versus staggered crossings with islands
Because the crossing runs straight across rather than being staggered (offset), the entire crossing functions as one single continuous crossing.
A central island only splits a Pelican crossing into two separate crossings if the two halves are staggered.
3
Determine the driver's legal duty during the flashing amber phase
Drivers must give way to any pedestrian who is on the crossing until they have completely reached the opposite pavement.
Under flashing amber, proceeding before the pedestrian has finished crossing is an offence and compromises pedestrian safety.

Anahtar Kavram

Highway Code rules for straight Pelican crossings with central islands during the flashing amber phase
Tahmini Süre:1m 0s
Soru 1453Soru →

As you travel along a town high street, you see a pedestrian waiting at the kerb of a zebra crossing. What should you do as you approach the crossing?

Cevabı ve açıklamayı göster

Cevap: Slow down, prepare to stop, and allow the pedestrian to cross without beckoning them

Cevap

Slow down, prepare to stop, and allow the pedestrian to cross without beckoning them.
Under the Highway Code, drivers approaching a zebra crossing should control their speed and be prepared to stop to give way to pedestrians waiting to cross. Drivers must never beckon pedestrians across or flash their headlights, as this could encourage them to step into the path of another vehicle that has not stopped.

Adım Adım Çözüm

1
Assess the crossing and road environment ahead upon spotting the zebra crossing and waiting pedestrian.
Identified a developing hazard requiring speed adjustment and heightened observation.
The Highway Code requires drivers to anticipate pedestrians waiting or preparing to cross at designated crossings.
2
Check rear-view mirrors and ease off the accelerator to smoothly bring the vehicle to a controlled stop before the give-way line.
The vehicle is positioned safely to allow the pedestrian to cross the road.
Pedestrians waiting at a zebra crossing should be given priority to cross in safety.
3
Remain stationary and wait patiently without waving, flashing headlights, or revving the engine.
The pedestrian crosses safely at their own pace without false reassurance.
Beckoning someone across could lead them into danger if another vehicle or cyclist fails to stop in an adjacent lane or opposite direction.

Anahtar Kavram

Approaching Zebra Crossings and Pedestrian Priority Rules
Tahmini Süre:1m 0s
Soru 1454Soru →

If you are unable to merge safely from the acceleration lane due to heavy traffic, you are permitted to continue driving along the hard shoulder until a suitable gap appears.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False — drivers are strictly prohibited from driving along the hard shoulder to join a motorway.
The statement is false because Highway Code Rule 259 explicitly states that drivers must give priority to traffic already on the motorway and must not use the hard shoulder to merge. If no safe opening is available before the acceleration lane ends, the driver must adjust speed and stop at the end of the lane rather than illegally proceeding down the hard shoulder.

Adım Adım Çözüm

1
Examine the rules governing the use of the hard shoulder under UK motorway regulations (Highway Code Rules 259 and 269).
The hard shoulder is designated solely for emergencies, breakdowns, or when explicitly directed by active smart motorway signage or police.
It is not an overrun area or an extension of the slip road acceleration lane.
2
Determine the required legal procedure when traffic in the left-hand lane does not provide a safe merging gap.
The driver must give way to main carriageway traffic and come to a stop at the end of the acceleration lane if a safe gap cannot be found.
Entering the motorway is subordinate to the right of way of vehicles already travelling on the main carriageway.
3
Evaluate the accuracy of the statement.
The statement claims driving along the hard shoulder to find a gap is permitted, which directly violates traffic law.
Because continuing onto the hard shoulder is unlawful and unsafe, the statement is false.

Anahtar Kavram

Prohibition of using the hard shoulder to merge onto a motorway
Tahmini Süre:45s
Soru 1455Soru →

In the UK Highway Code, regulatory road signs inform road users of statutory prohibitions and mandatory instructions. Which legal obligation corresponds to each sign? Match each described regulatory sign with its correct driving requirement.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Circular sign with a red outer ring containing the black numeral '30'
Octagonal red sign with a white border and white lettering stating 'STOP'
Blue circular sign displaying a white arrow pointing diagonally down to the left
Inverted triangular sign with a red border containing the words 'GIVE WAY'

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

The red circular sign with '30' matches the maximum speed limit of 30 mph; the octagonal 'STOP' sign matches the legal requirement to stop completely before the solid line; the blue circular sign with a downward left arrow matches the mandatory positive order to pass on the left; and the inverted triangular 'GIVE WAY' sign matches giving priority to traffic on the major road.
In the UK, signs within red circles set prohibitions or maximum restrictions (such as a 30 mph limit). Blue circles provide positive mandatory instructions (such as 'Keep Left'). The octagonal 'STOP' sign and inverted triangular 'GIVE WAY' sign are distinct regulatory signs controlling junction priority, requiring a mandatory complete stop and yielding right-of-way respectively.

Adım Adım Çözüm

1
Identify the basic rules of UK regulatory sign shapes and colours
Red rings indicate prohibitions, blue circles give positive mandatory orders, the unique octagon mandates stopping, and the inverted triangle mandates giving way.
Regulatory signs tell road users what they must or must not do, with shape and colour denoting the nature of the instruction.
2
Pair each specific sign description to its precise legal duty
Red ring '30' pairs with 30 mph limit, octagonal 'STOP' pairs with complete halt at the line, blue circle arrow pairs with keeping left, and inverted triangle 'GIVE WAY' pairs with yielding priority.
Each regulatory sign carries specific statutory weight under the Road Traffic Regulation Act and TSRGD.

Anahtar Kavram

UK Regulatory Signs: Prohibitions, Mandatory Orders, and Junction Controls
Tahmini Süre:45s
Soru 1456Soru →

A car-derived van with a maximum laden weight not exceeding 2 tonnes is subject to the same national speed limits as a standard passenger car on single and dual carriageways.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True
The statement is correct because the UK Highway Code specifies that car-derived vans with a maximum laden weight of up to 2 tonnes have the same national speed limits as cars (60 mph on single carriageways and 70 mph on dual carriageways).

Adım Adım Çözüm

1
Identify the vehicle category and its maximum laden weight.
The vehicle is a car-derived van with a maximum laden weight of 2 tonnes or less.
Vehicle weight and classification determine which speed limit tier applies under UK traffic law.
2
Recall the UK national speed limit rules applicable to this vehicle category.
Car-derived vans up to 2 tonnes share the 60 mph single carriageway and 70 mph dual carriageway limits of passenger cars.
The Highway Code explicitly groups cars, motorcycles, and car-derived vans up to 2 tonnes into the standard national speed limit category.
3
Evaluate the statement against the statutory rules.
The statement is accurate and true.
Both single and dual carriageway limits for car-derived vans up to 2 tonnes match those of passenger cars.

Anahtar Kavram

National speed limits for car-derived vans under 2 tonnes
Soru 1457Soru →

You are waiting at a T-junction to turn onto a major road in dense fog, where visibility is severely restricted. What safety precaution should you take before emerging?

Cevabı ve açıklamayı göster

Cevap: Wind down your window to listen for approaching traffic before pulling out

Cevap

Wind down your window to listen for approaching traffic before pulling out.
According to The Highway Code (Rule 235), when approaching a junction where visibility is severely restricted by fog, you should stop in the correct position, open a window to listen for approaching traffic, and only emerge when you are entirely certain it is safe to do so.

Adım Adım Çözüm

1
Assess the severe limitations of forward and lateral sightlines caused by thick fog at the junction.
Visual cues alone are insufficient to confirm that the major carriageway is clear.
Dense fog diffuses light and drastically shortens visual range, hiding oncoming vehicles until they are dangerously close.
2
Apply the Highway Code rule for emerging at junctions with severely limited visibility.
Stop at the give-way or stop line, lower the driver's window, and listen intently for traffic sounds before moving off.
Auditory observation provides critical information about approaching vehicles when sight is heavily obscured.

Anahtar Kavram

Observation techniques and junction procedures in dense fog (Highway Code Rule 235)
Tahmini Süre:45s
Soru 1458Soru →

You are driving along a multi-lane one-way street in a town centre and plan to turn right at the upcoming junction. Unless road markings or signs direct otherwise, what is the correct lane discipline and observation procedure to follow?

Cevabı ve açıklamayı göster

Cevap: Select the right-hand lane in good time and remain aware that traffic may legally pass on either side.

Cevap

Select the right-hand lane in good time and remain aware that traffic may legally pass on either side.
Highway Code Rule 143 specifies that when driving in one-way streets, you should choose the correct lane for your exit as soon as you can. When turning right, you should use the right-hand lane unless signs or road markings indicate otherwise. Furthermore, drivers must remember that traffic can pass on either side.

Adım Adım Çözüm

1
Assess the road environment and intended route at the approach to the one-way street junction.
Identified the route as a right turn from a multi-lane one-way street.
Correct lane selection must be established well before reaching the junction to avoid sudden manoeuvres.
2
Apply Highway Code Rule 143 for multi-lane one-way systems.
Move smoothly into the right-hand lane following the Mirror-Signal-Manoeuvre routine.
In one-way streets, drivers must use the right-hand lane when intending to turn right unless signs or road markings dictate otherwise.
3
Maintain continuous all-round observation for passing vehicles.
Anticipate road users passing on both the nearside and offside.
Traffic in one-way systems can legally flow and overtake on either side, requiring heightened vigilance for vulnerable road users.

Anahtar Kavram

Lane selection and observational awareness in multi-lane one-way streets under UK Highway Code Rule 143.
Tahmini Süre:1m 0s
Soru 1459Soru →

A sudden puncture forces you to pull your car onto the hard shoulder of a standard motorway. Arrange the following procedural steps in the correct chronological sequence to ensure the safety of yourself and your passengers according to the Highway Code.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence is: first, switch on your hazard warning lights; second, ensure all occupants exit the vehicle through the left-hand passenger doors; third, move everyone behind the safety barrier and up the embankment; and fourth, walk along the verge to the nearest emergency roadside telephone following the marker post arrows.
According to Highway Code Rule 275, the priority when stopping on a motorway hard shoulder is immediate visual warning (hazard warning lights), followed by safe passenger evacuation through the nearside (left-hand) doors, moving everyone behind the safety barrier and up the embankment, and finally locating and using the emergency roadside telephone to report the breakdown.

Adım Adım Çözüm

1
Activate the vehicle's hazard warning lights immediately upon stopping on the hard shoulder.
The broken-down vehicle is highlighted to approaching traffic from behind.
Highway Code Rules 274 and 275 require warning other road users straight away to reduce the risk of rear-end collisions.
2
Direct all occupants to evacuate using only the left-side (nearside) doors.
Passengers step directly onto the verge rather than towards the carriageway.
Exiting from the right-side doors places individuals into live traffic lanes or extremely close to fast-moving vehicles.
3
Guide all passengers behind the metal crash barrier and up the embankment.
Occupants are shielded from errant vehicles that might drift onto the hard shoulder.
The hard shoulder is not a safe waiting place; sitting inside the vehicle or standing on the tarmac carries a high risk of injury.
4
Locate and walk to the nearest emergency telephone using the arrows on the roadside marker posts.
The breakdown is reported directly to the control centre with an exact location reference.
Roadside emergency phones automatically identify your location to National Highways or the police, enabling rapid assistance.

Anahtar Kavram

Highway Code Rule 274/275 standard motorway breakdown safety and evacuation sequence
Tahmini Süre:1m 15s
Soru 1460Soru →

You intend to overtake a large goods vehicle travelling on a single-carriageway road. What is the main reason for dropping back to increase your following distance before attempting the manoeuvre?

Cevabı ve açıklamayı göster

Cevap: To gain a wider view of the road ahead and identify approaching hazards

Cevap

To gain a wider view of the road ahead and identify approaching hazards
Large goods vehicles significantly obstruct forward vision. Dropping well back opens up your angle of view along both sides of the vehicle, allowing you to see oncoming vehicles, road bends, and potential hazards well in advance so you can safely plan the overtake.

Adım Adım Çözüm

1
Assess the forward visibility restriction caused by the size of the large goods vehicle ahead.
Recognise that travelling close behind a large vehicle significantly narrows your forward sightlines.
Large vehicles block the forward view of the road, obscuring bends, dips, oncoming traffic, and road signs.
2
Increase following separation by dropping back smoothly before planning the overtake.
An expanded sightline opens up around both sides of the vehicle ahead.
A greater separation distance allows you to observe approaching hazards, judge overtaking distance accurately, and pull out safely without sudden manoeuvres.

Anahtar Kavram

Maintaining adequate following distance behind large goods vehicles to maximise forward visibility before overtaking
Tahmini Süre:45s
ÖncekiSayfa 73 / 95Sonraki
Tüm alıştırma soruları — UK Driving Theory Test | Examkin