Tüm alıştırma soruları

Soru 861Soru →

Review the following excerpts from a field evaluation report on military logistics gear. Match each excerpt to the primary tone conveyed by the author.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The excerpt questioning the solar purifier matches the skeptical and questioning tone; the excerpt praising the canvas reservoir matches the appreciative and commendatory tone; and the excerpt warning about boiler valve hazards matches the cautionary and critical tone.

Author tone is identified through choice of evaluative words and perspective: 'casting serious doubt' conveys skepticism, 'remarkable resilience' conveys appreciation, and 'unacceptable safety risk' conveys a cautionary warning.

Adım Adım Çözüm

1

Analyze the evaluative diction of the first excerpt regarding the solar purifier.

The text directly challenges supplier claims with the phrase 'casting serious doubt.'

Challenging assertions and pointing out flaws indicates skepticism.

2

Analyze the evaluative diction of the second excerpt regarding the canvas reservoir.

The text uses positive descriptors including 'remarkable resilience' and 'surpassing performance expectations.'

Highlighting superior performance and ease of use demonstrates an appreciative tone.

3

Analyze the evaluative diction of the third excerpt regarding thermal boilers.

The text highlights an 'unacceptable safety risk' that will 'inevitably lead to personnel injury.'

Urgent warnings highlighting severe operational dangers reflect a cautionary tone.

Anahtar Kavram

Inferring author tone through evaluative diction and attitude indicators

Soru 862Soru →

Read the following passage from a geological survey report:

'During the survey of the northern plateau, technicians observed intermittent seismic tremors that disrupted sensitive recording equipment. To protect the sensors, the field crew excavated a subterranean testing station sixty feet below the bedrock. By routing power cables through existing fissures, engineers managed to circumvent the solid granite ridge without destructive blasting.'

Match each bolded term from the passage with its correct contextual definition based on its morphological components (roots and affixes).

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

'intermittent' matches 'Occurring at periodic intervals with pauses in between', 'subterranean' matches 'Situated, operating, or constructed beneath the surface of the earth', and 'circumvent' matches 'Bypassing, going around, or finding a way past an obstacle'.

Each word is matched by breaking down its morphemes: 'inter-' (between) + 'mittere' (send) forms 'intermittent' (occurring with intervals in between); 'sub-' (under) + 'terra' (earth) forms 'subterranean' (under the earth); and 'circum-' (around) + 'vent' (go) forms 'circumvent' (going around an obstacle).

Adım Adım Çözüm

1

Analyze the morphology and context of 'intermittent'

Prefix 'inter-' (between) combined with root 'mittere' (to send/release) indicates actions that start and stop with intervals in between, matching tremors that periodically disrupt instruments.

Morphemic analysis reveals periodic recurrence rather than continuous action.

2

Analyze the morphology and context of 'subterranean'

Prefix 'sub-' (under/below) combined with root 'terra' (earth/ground) indicates being located below the ground surface, matching a station built sixty feet below bedrock.

Root and prefix analysis directly confirms physical placement under the earth.

3

Analyze the morphology and context of 'circumvent'

Prefix 'circum-' (around) combined with root 'vent' (to go/come) describes going around a barrier, matching how engineers routed around the ridge rather than blasting through it.

Combining the spatial prefix with passage clues clarifies avoiding an obstacle.

Anahtar Kavram

Using Latin and Greek prefixes, roots, and suffixes in combination with surrounding context clues to determine the precise meaning of vocabulary words.

Tahmini Süre:1m 15s

Soru 863Soru →

Read the following passage about oceanic research:

"During the deep-sea survey of the oceanic trench, the research team had to sound the seafloor to calculate depth contours before deploying the robotic arm. Despite the extreme pressure, the crew managed to weather several sensor malfunctions without aborting the dive. Once on the seabed, the mechanical gripper was instructed to harbor delicate sediment cores within its sealed containment chamber until surfacing."

Based on the context of the passage, match each word to its specific contextual meaning.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

'sound' matches 'To measure and determine the depth of a body of water'; 'weather' matches 'To endure and withstand challenging difficulties'; and 'harbor' matches 'To shelter and securely hold inside a enclosure.'

Each match is determined strictly by context clues in the passage: 'sound' is paired with measuring depth contours; 'weather' is paired with enduring malfunctions without quitting; and 'harbor' is paired with protecting and containing samples in a chamber.

Adım Adım Çözüm

1

Examine the context surrounding the word 'sound' in the first sentence.

The text links 'sound the seafloor' directly to calculating 'depth contours.'

This shows the nautical use of 'sound' as an action to measure depth rather than producing an audible noise.

2

Analyze the action associated with 'weather' in the second sentence.

The crew faced difficulties ('sensor malfunctions') but continued 'without aborting the dive.'

This establishes 'weather' as a verb meaning to endure or withstand adverse circumstances rather than referring to atmospheric climate.

3

Evaluate how 'harbor' is applied to the sediment cores in the final sentence.

The gripper holds the physical samples 'within its sealed containment chamber.'

This indicates that 'harbor' means to house, shelter, or contain safely rather than referring to a coastal docking port.

Anahtar Kavram

Inferring secondary or domain-specific meanings of polysemous words through surrounding syntactic and situational clues.

Tahmini Süre:1m 15s

Soru 864Soru →

Read the following equipment maintenance log:

"During winter operational testing, the primary hydraulic actuator was sluggish, while the secondary backup actuator was highly responsive. Technicians observed that the treated surface coating remained dull rather than lustrous. Furthermore, the high-pressure exhaust port became scorching, despite the adjacent intake duct staying completely frigid."

Based on the contrast context clues in the passage, match each target word on the left with its directly contrasting counterpart on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

sluggish matches with responsive; dull matches with lustrous; scorching matches with frigid.

Each pair is established through explicit contrast signal words in the text: 'sluggish' is contrasted with 'responsive' using the conjunction 'while'; 'dull' is contrasted with 'lustrous' using the comparative phrase 'rather than'; and 'scorching' is contrasted with 'frigid' using the concession preposition 'despite'.

Adım Adım Çözüm

1

Locate explicit contrast transition signal words in each sentence of the passage.

Identified the contrast indicators 'while', 'rather than', and 'despite'.

Contrast transition words signal that two connected ideas or descriptive terms represent opposite conditions or qualities.

2

Pair each target term with the word set in direct opposition across its respective transition indicator.

'sluggish' is linked across 'while' to 'responsive'; 'dull' is linked across 'rather than' to 'lustrous'; 'scorching' is linked across 'despite' to 'frigid'.

Each clause sets up a direct antonym relationship using the identified contrast indicators.

Anahtar Kavram

Identifying Antonym and Contrast Context Clues

Tahmini Süre:45s

Soru 865Soru →

Read the following technical passage about aircraft emergency systems:

A Ram Air Turbine (RAT) is an emergency power source installed on modern military and commercial aircraft. In the event of total engine failure or primary electrical and hydraulic loss, the RAT automatically deploys into the airstream from a compartment in the fuselage or wing. As oncoming airflow spins its multi-blade propeller, the turbine directly drives a dedicated hydraulic pump, an electrical generator, or both. The RAT is governed to operate only when the aircraft maintains a minimum airspeed to ensure sufficient rotational speed. Because it derives its kinetic energy strictly from forward motion, it cannot generate power while the aircraft is stationary on the ground. Once deployed in flight, standard RAT systems cannot be retracted from the cockpit and must be manually reset by ground maintenance personnel after landing.

Match each statement regarding Ram Air Turbine (RAT) operation with its factual status according to the passage.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Generating power while stationary on the ground matches being contradicted due to forward motion requirements; retracting mid-flight via cockpit controls matches being contradicted due to requiring ground maintenance reset; and deploying automatically upon primary power failure matches being explicitly confirmed by the passage.

The passage outlines clear technical constraints for the Ram Air Turbine. Generating power on the ground is contradicted because the system requires kinetic energy from forward airspeed. In-flight retraction from the cockpit is contradicted because reset requires manual action by ground maintenance personnel. In contrast, automatic deployment following total primary power loss is explicitly confirmed by the text.

Adım Adım Çözüm

1

Evaluate the statement regarding stationary ground power generation against the text.

The passage explicitly notes that the RAT cannot generate power while stationary on the ground because it requires forward motion.

Identifies that ground power generation is a contradicted negative detail.

2

Evaluate the statement regarding cockpit retraction against the text.

The passage confirms that in-flight cockpit retraction is impossible and that reset requires ground maintenance personnel after landing.

Identifies that mid-flight cockpit retraction is contradicted by the passage.

3

Evaluate the statement regarding automatic deployment conditions.

The text directly states that total engine failure or primary electrical/hydraulic loss triggers automatic deployment.

Confirms this statement as a directly stated positive detail.

Anahtar Kavram

Distinguishing explicitly stated facts from contradicted or unsupported operational claims in technical passages.

Tahmini Süre:1m 0s

Soru 866Soru →

Match each complex algebraic expression with its completely simplified polynomial form.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The first expression maps to

-2x^2 - 2xy

, the second expression maps to

y^2

, the third expression maps to

-2xy + 9y^2

, and the fourth expression maps to

2x^2 - 4y^2

.

Each expression represents a distinct structural archetype for polynomial simplification. By systematically applying the order of operations—expanding binomials, distributing negative coefficients, and resolving nested grouping symbols from the inside out—all like terms can be properly combined to reach the correct canonical form.

Adım Adım Çözüm

1

Simplify the first expression by resolving innermost parentheses, then brackets, then combining terms.

3x^2 - 6xy - [2x^2 - 4xy + 3x^2]

simplifies to

3x^2 - 6xy - 5x^2 + 4xy

, which yields

-2x^2 - 2xy

.

Following the order of operations from the innermost grouping symbols prevents sign errors when distributing negative coefficients.

2

Simplify the second expression by expanding the binomial square and distributing.

(4x^2 - 4xy + y^2) - (4x^2 - 4xy)

simplifies directly to

y^2

.

Proper binomial expansion

(a-b)^2 = a^2 - 2ab + b^2

avoids the common error of dropping the middle term, allowing opposite terms to cancel.

3

Simplify the third expression using the difference of squares formula, then distribute the negative.

-(x^2 - 9y^2) + x^2 - 2xy

simplifies to

-x^2 + 9y^2 + x^2 - 2xy

, which reduces to

-2xy + 9y^2

.

Recognizing the difference of squares simplifies multiplication, and properly distributing the outer negative sign ensures the squared variable term has the correct positive sign.

4

Simplify the fourth expression by distributing within the brackets before multiplying by the outer coefficient.

4xy - 2[-x^2 + 2xy + 2y^2]

simplifies to

4xy + 2x^2 - 4xy - 4y^2 = 2x^2 - 4y^2

.

Combining like terms inside the bracket before multiplying by the outer constant significantly reduces the chance of sign and variable combination errors.

Anahtar Kavram

Simplifying Complex Multivariable Algebraic Expressions

Tahmini Süre:3m 0s

Soru 867Soru →

Match each complex unsimplified algebraic expression with its correctly simplified equivalent.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The correct pairings match each multi-step expression to its exact simplified polynomial counterpart: L1 matches R1, L2 matches R2, L3 matches R3, and L4 matches R4.

Each correct match is formed by strictly following the order of operations: clearing innermost groupings first, distributing outer multipliers across all contained terms, and combining structurally identical variable terms into standard canonical form.

Adım Adım Çözüm

1

Simplify the first expression

-3x[2y - (x - 4y)] + 2x(x - y)

.

The expression simplifies to

5x^2 - 20xy

.

By following the order of operations, innermost parentheses are cleared first, followed by distribution and combining like terms.

2

Simplify the second expression

4xy - 2[x(3y - x) - y(x + 2y)]

.

The expression simplifies to

2x^2 + 4y^2

.

Expanding the terms inside the bracket yields

-x^2 + 2xy - 2y^2

. Distributing the

-2

flips the signs, and the

xy

terms successfully cancel.

3

Simplify the third expression

x^2(y - 2) - [xy(x - 3) - x(2x + y)] - xy

.

The expression simplifies to

3xy

.

Careful distribution of the negative sign across the simplified bracket

(x^2y - 2x^2 - 4xy)

allows multiple high-degree terms to cancel out perfectly.

4

Simplify the fourth expression

-(2x - 3y)(x + y) + x(2x + y) - y(x - 3y)

.

The expression simplifies to

xy + 6y^2

.

FOILing the first binomial and keeping the negative sign outside ensures signs are correctly flipped before combining with the other distributed terms.

Anahtar Kavram

Simplifying complex algebraic expressions through precise application of the distributive property, order of operations (PEMDAS), and combination of like terms.

Tahmini Süre:4m 0s

Soru 868Soru →

Read the following technical passage:

"An aircraft's pitot-static system utilizes air pressure differentials to operate three essential flight instruments: the airspeed indicator, the altimeter, and the vertical speed indicator. Ram air pressure entering the forward-facing pitot tube drives the airspeed indicator alone. Ambient atmospheric pressure enters through flush-mounted static ports on the fuselage and is routed to all three instruments. When pitot tube drain holes become clogged in icing conditions, electrical heating elements prevent ice accumulation. If the static port freezes shut, the altimeter freezes at its current altitude and the vertical speed indicator drops to zero, but the system does not utilize engine bleed air to clear the blockage."

Based on the passage, match each operational statement with its corresponding factual status according to the text.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Engine bleed air is channeled to clear frozen static ports matches Explicitly identified as a method NOT used by the system to remove ice blockages; Electrical heating elements are used to prevent ice accumulation matches Directly confirmed as the safeguard mechanism against ice buildup on the pitot tube; Ambient air pressure from static ports is routed exclusively to the vertical speed indicator matches Directly contradicted by the passage, which states static pressure is routed to all three instruments; Ram air pressure captured by the forward-facing pitot tube drives only the airspeed indicator matches Directly confirmed as supplying pressure exclusively to a single flight instrument.

Each statement aligns precisely with its textual verification status: the use of engine bleed air is explicitly negated by the phrase 'does not utilize engine bleed air'; electrical heating is explicitly affirmed for pitot ice prevention; the routing of static air exclusively to one instrument is directly contradicted by the text stating it feeds all three instruments; and ram air driving only the airspeed indicator is directly confirmed by the word 'alone'.

Adım Adım Çözüm

1

Analyze the passage for negative assertions and explicit operational exclusions.

Identified the explicit negative detail: the passage clarifies that the system does not use engine bleed air for de-icing.

Negative detail identification requires isolating qualifying words like 'not', 'never', or explicit exclusions in the stimulus.

2

Verify positive and contradictory factual statements against the passage text.

Confirmed that electrical heating is directly stated, ram air powering only the airspeed indicator is directly stated, and routing static pressure to only one instrument directly contradicts the passage.

Cross-referencing each claim against textual evidence determines whether each item is stated, contradicted, or negatively excluded.

3

Map each statement to its matching textual status.

Formed all four unambiguous matching pairs.

Ensures complete alignment between statements and their textual status.

Anahtar Kavram

Negative Detail Identification in Technical Texts

Tahmini Süre:1m 15s

Soru 869Soru →

Read the following passage:

Marine vessels operating in saltwater environments face severe galvanic corrosion when dissimilar metals contact electrolyte solutions. To protect submerged steel hulls, naval engineers install cathodic protection systems utilizing sacrificial zinc or aluminum anodes. These sacrificial metals possess a lower electrochemical potential, ensuring they corrode preferentially while preserving the critical steel structure. However, vessel operators must regularly inspect these anodes; once consumed beyond fifty percent of their original volume, their protective current drops significantly, leaving the hull vulnerable. While impressed-current systems offer an adjustable alternative, sacrificial anodes remain the most reliable, cost-effective safeguard for routine harbor craft operations.

Match each excerpted statement from the passage to the author's primary communicative intent in including it.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Match the opening statement on galvanic corrosion to establishing the underlying operational threat; match the warning regarding the fifty percent consumption threshold to emphasizing a critical maintenance threshold and cautioning against neglect; match the comparison between impressed-current and sacrificial systems to justifying the practical preference for one engineering solution over an alternative.

Each statement serves a distinct rhetorical function within the passage structure: establishing the baseline hazard, specifying operational precautions to maintain system efficacy, and providing a reasoned defense of the chosen technical approach against alternatives.

Adım Adım Çözüm

1

Analyze the rhetorical role of the first excerpt concerning galvanic corrosion in saltwater.

The author opens with this fact to establish the core problem and context for the entire discussion.

Identifying introductory context helps distinguish problem-setting statements from technical solutions.

2

Examine the function of the second excerpt regarding anode inspection and the fifty percent depletion limit.

The word 'However' and the focus on vulnerability indicate a warning about maintenance discipline.

Recognizing transitional markers and cautionary phrasing clarifies the intent to mandate action and warn of hazards.

3

Determine the purpose of the final sentence comparing sacrificial anodes to impressed-current systems.

The author evaluates competing methods and defends the selection of sacrificial anodes based on reliability and cost.

Comparative language concluding a passage typically serves to defend or justify a specific practical choice.

Anahtar Kavram

Inferring Author Purpose and Intent

Tahmini Süre:1m 0s

Soru 870Soru →

Match each unsimplified algebraic expression on the left with its correctly simplified form on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The correct matches pair each unsimplified expression with its corresponding simplified form: 4m + 7m - 2 pairs with 11m - 2; 3(2m + 5) pairs with 6m + 15; 9m - (4m - 3) pairs with 5m + 3; and m(2m - 1) pairs with 2m^2 - m.

Each unsimplified expression is paired with its mathematically equivalent simplified form by correctly applying standard algebraic rules: combining like terms and utilizing the distributive property.

Adım Adım Çözüm

1

Simplify the first expression by identifying and combining like terms.

4m + 7m - 2 = 11m - 2

The terms 4m and 7m have the exact same variable part and can be added together.

2

Simplify the second expression by applying the distributive property.

3(2m + 5) = 6m + 15

The outside factor of 3 must be multiplied by every term contained inside the parentheses.

3

Simplify the third expression by distributing the negative sign, then combining the resulting like terms.

9m - 4m + 3 = 5m + 3

Subtracting a grouped polynomial requires reversing the sign of each term within the group.

4

Simplify the fourth expression by multiplying the variable through the parentheses.

m(2m - 1) = 2m^2 - m

Multiplying a variable by itself increases its exponent based on the laws of exponents.

Anahtar Kavram

Simplifying Algebraic Expressions

Soru 871Soru →

Pair each unsimplified algebraic expression with its correctly simplified polynomial equivalent in standard form.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The expressions simplify as follows: the first expression simplifies to 4p² - 11pq; the second to -2p² + 14pq; the third to 4p² + 5pq; and the fourth to -2p² + 3pq.

Each expression is correctly simplified by first distributing the outer multipliers to every term inside their respective parentheses, paying close attention to negative signs. Once expanded, like terms (terms containing p² and terms containing pq) are combined by adding or subtracting their coefficients.

Adım Adım Çözüm

1

Simplify the first expression: 3p(2p - q) - 2(p² + 4pq)

6p² - 3pq - 2p² - 8pq = 4p² - 11pq

Distribution of the outside terms into the parentheses, followed by grouping like terms.

2

Simplify the second expression: -4(p² - 2pq) + 2p(p + 3q)

-4p² + 8pq + 2p² + 6pq = -2p² + 14pq

Carefully distribute the negative constant (-4), changing the inner sign to positive 8pq, then combine like terms.

3

Simplify the third expression: p(5p + 2q) - (p² - 3pq)

5p² + 2pq - p² + 3pq = 4p² + 5pq

Distribute the variable p and distribute the negative sign to flip the inner signs, then collect like terms.

4

Simplify the fourth expression: 2(3p² - pq) - p(8p - 5q)

6p² - 2pq - 8p² + 5pq = -2p² + 3pq

Distribute the 2 and the -p, ensuring the multiplication of -p and -5q results in +5pq, then combine.

Anahtar Kavram

Simplifying Algebraic Expressions

Soru 872Soru →

Read the following passage:

During deep-sea submersible operations, specialized instruments continuously monitor environmental and mechanical variables. The hull must withstand hyperbaric—that is, extremely high-pressure—deep-water conditions without structural deformation. Meanwhile, technicians inspect the tenuous, or fragile and easily broken, fiber-optic telemetry cables that transmit sonar data to the surface ship. Additionally, the filtration systems must remain potent, meaning highly effective and powerful, to continuously purify cabin atmosphere during prolonged underwater missions.

Based on the synonymous context clues provided in the passage, match each target vocabulary word to the phrase that directly defines it.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The target term 'hyperbaric' pairs with 'Extremely high-pressure', 'tenuous' pairs with 'Fragile and easily broken', and 'potent' pairs with 'Highly effective and powerful'.

Each vocabulary term is paired with its explicit contextual synonym embedded in the passage using standard punctuation markers (dashes, commas) and signal phrases ('that is', 'or', 'meaning'). 'Hyperbaric' corresponds directly to 'extremely high-pressure', 'tenuous' corresponds to 'fragile and easily broken', and 'potent' corresponds to 'highly effective and powerful'.

Adım Adım Çözüm

1

Locate the word 'hyperbaric' and examine the surrounding punctuation and transition words.

Identified the dash and signal phrase 'that is, extremely high-pressure' directly defining 'hyperbaric'.

Authors use 'that is' set off by punctuation to provide direct synonymous restatements of technical terms.

2

Locate the word 'tenuous' and identify the descriptive phrase following the comma.

Identified the coordinate phrase 'or fragile and easily broken' qualifying 'tenuous'.

The conjunction 'or' followed by descriptive adjectives provides an immediate synonymous equivalent.

3

Locate the word 'potent' and track the explanatory clause.

Identified 'meaning highly effective and powerful' as the direct textual synonym for 'potent'.

The participial phrase 'meaning...' explicitly defines the preceding adjective.

Anahtar Kavram

Identifying Synonymous Context Clues

Tahmini Süre:1m 15s

Soru 873Soru →

Evaluate the following multivariable algebraic expressions. Pair each original expression with its simplified form in standard notation.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Each unsimplified expression matches exactly one standard form polynomial upon successful expansion and collection of like terms.

Each pairing is correct because the unsimplified expressions rigidly evaluate to the exact standard forms provided when algebraic expansion and simplification rules are followed without computational errors.

Adım Adım Çözüm

1

Simplify the first expression by expanding and subtracting the grouped terms.

-3a(2a - b) - (a - 2b)(2a + b)

simplifies to

-8a^2 + 6ab + 2b^2

.

Applying the distributive property and FOIL method accurately, followed by subtracting the terms (which reverses their signs).

2

Simplify the second expression by applying distribution to both halves.

2ab(a - 3b) - a(2ab - 5b^2)

simplifies to

-ab^2

.

Distributing the multipliers across the parentheses isolates terms that naturally cancel or combine.

3

Simplify the third expression by expanding the perfect square.

4(a^2 - ab + b^2) - (2a - b)^2

simplifies to

3b^2

.

The expansion of

(2a - b)^2

creates terms that precisely offset the

a^2

and

ab

terms in the distributed trinomial.

4

Simplify the fourth expression by expanding all grouped and squared segments.

a^2(2b - 1) - b(a^2 - 2a) + (a - b)^2 - b^2

simplifies to

a^2b

.

Combining the resulting elements reveals that nearly all terms possess additive inverses, leaving only the combination of

2a^2b - a^2b

.

Anahtar Kavram

Expanding polynomials, applying the distributive property with negative signs, and collecting like variables.

Soru 874Soru →

Read the following technical briefing:

During winter flight operations, ground crews apply specialized deicing and anti-icing fluids to ensure aerodynamic safety. Type I deicing fluid, applied heated to melt accumulated snow, provides a maximum holdover protection time of 15 minutes in light freezing drizzle. For prolonged ground delays in freezing precipitation, crews apply Type II fluid, which maintains an effective holdover duration of 45 minutes. For severe winter conditions with heavy freezing rain, advanced Type IV fluid is utilized, delivering up to 80 minutes of surface protection. Meanwhile, standard Type III fluid is reserved for commuter aircraft with rotation speeds below 100 knots.

Based on the technical briefing above, match each aircraft fluid type with its correct operational quantitative specification.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Type I fluid matches 15 minutes maximum holdover protection; Type II fluid matches 45 minutes effective holdover duration; Type III fluid matches rotation speeds below 100 knots; Type IV fluid matches up to 80 minutes of surface protection.

Each fluid type is matched strictly to its explicitly stated metric in the passage: Type I is given as 15 minutes, Type II as 45 minutes, Type III as under 100 knots rotation speed, and Type IV as up to 80 minutes.

Adım Adım Çözüm

1

Locate the quantitative value associated with Type I fluid in the stimulus.

Identified '15 minutes' as the holdover protection time for Type I fluid.

Direct factual extraction of the first quantitative specification.

2

Locate the quantitative duration tied to Type II fluid.

Identified '45 minutes' as the holdover duration for Type II fluid.

Direct factual extraction of the second quantitative specification.

3

Locate the operating constraint stated for Type III fluid.

Identified 'rotation speeds below 100 knots' as the criterion for Type III fluid.

Distinguishing between time durations and operational speed thresholds.

4

Locate the maximum protection duration specified for Type IV fluid.

Identified '80 minutes' as the duration for Type IV fluid.

Direct factual extraction of the final quantitative specification.

Anahtar Kavram

Quantitative Detail Extraction from Technical Text

Tahmini Süre:1m 0s

Soru 875Soru →

Match each unsimplified algebraic expression on the left with its correctly simplified polynomial equivalent on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The correct pairings link each unsimplified expression with its resulting simplified polynomial after applying the distributive property and combining like terms.

Each unsimplified expression is accurately paired with its simplified equivalent by first applying the distributive property to eliminate all parentheses, rigorously managing negative multipliers, and finally grouping and combining all like terms according to their respective exponents.

Adım Adım Çözüm

1

Expand and simplify the first expression.

6x^2 - 12x - 2x^2 + 10x

, which simplifies to

4x^2 - 2x

.

Applying the distributive property and combining the

x^2

terms and the

x

terms.

2

Expand and simplify the second expression.

5x^2 - 15x + 10 - 4x^2 + 8x

, which simplifies to

x^2 - 7x + 10

.

Distributing the constants and variables across parentheses, paying special attention to the negative signs.

3

Expand and simplify the third expression.

-6x^2 - 2x + 5x^2 - 4x

, which simplifies to

-x^2 - 6x

.

Multiplying each term inside the parentheses by the outside factor and combining the resulting like terms.

4

Expand and simplify the fourth expression.

8x^2 - 4x - 3x^2 - 6x + 3

, which simplifies to

5x^2 - 10x + 3

.

Distributing the

-3

correctly reverses the signs of all terms within the second polynomial.

Anahtar Kavram

Simplifying Algebraic Expressions

Soru 876Soru →

Read the passage below:

During fiber-optic cable installation, technicians rely on automated fusion splicing rather than mechanical splices for permanent trunk lines. While mechanical connectors merely align fiber cores inside a gel-filled sleeve, fusion splicers align the glass strands microscopically and emit an electric arc to melt and weld the tips together. Although fusion equipment requires significant upfront investment and meticulous cleaving of the glass ends, it reduces optical signal loss to less than 0.02 decibels per splice and permanently eliminates air gaps. By ensuring structural continuity, fusion splicing prevents reflective signal degradation that would otherwise cripple long-distance data transmission.

Match each excerpted statement from the passage with the author's primary communicative intent for including it.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Match the excerpt describing mechanical connectors to contrasting an alternative method's mechanical arrangement; match the excerpt regarding upfront investment and cleaving to acknowledging procedural and financial hurdles; match the excerpt concerning structural continuity to explaining the operational necessity of seamless physical integration.

Each statement serves a distinct rhetorical purpose within the author's overall explanation of fusion splicing: contrasting a simpler alternative, conceding minor limitations to reinforce technical advantages, and connecting physical characteristics to end-to-end network reliability.

Adım Adım Çözüm

1

Analyze the rhetorical function of the mechanical connector clause.

The clause 'While mechanical connectors merely align...' sets up a direct comparison to highlight what fusion splicing does differently.

Authors use comparative subordinate clauses to differentiate competing technologies.

2

Analyze the purpose of the concession regarding equipment cost and cleaving precision.

The phrase 'Although fusion equipment requires...' acknowledges obstacles (cost, labor precision) before delivering the payoff (minimal signal loss).

Identifying concessions helps uncover how an author balances practical limitations against technical advantages.

3

Determine the role of the concluding statement regarding signal degradation.

The phrase explains why preventing degradation is vital to keeping long-distance lines operational.

Concluding causal statements in technical passages typically articulate the broader systemic significance of the main process.

Anahtar Kavram

Inferring Rhetorical Intent and Subordinate Clause Purpose

Tahmini Süre:1m 15s

Soru 877Soru →

During pre-deployment staging, technicians inspect the aerial delivery harnesses for any frayed—that is, unraveled or worn—webbing before loading cargo. They must also verify that the latching mechanism remains pliable, or easily bent and flexible, despite freezing temperatures. Finally, operators ensure the release pins are completely unobstructed, meaning clear and unblocked, to guarantee proper container separation. Based on the passage, match each vocabulary term with the synonymous clue phrase that directly defines it.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

'Frayed' matches with 'Unraveled or worn', 'Pliable' matches with 'Easily bent and flexible', and 'Unobstructed' matches with 'Clear and unblocked'.

Each term in the passage is paired with an explicit synonymous context clue: 'frayed' is restated as 'unraveled or worn', 'pliable' is clarified by the appositive 'easily bent and flexible', and 'unobstructed' is defined by 'meaning clear and unblocked'.

Adım Adım Çözüm

1

Locate the word 'frayed' and identify its structural context clue.

The word is followed by the clarifying phrase 'that is, unraveled or worn' bounded by dashes.

The phrase introduced by 'that is' provides a direct synonymous definition.

2

Locate the word 'pliable' and examine the adjoining phrase.

The word is directly followed by ', or easily bent and flexible,'.

The connector 'or' introduces an appositive restatement defining the target adjective.

3

Locate the word 'unobstructed' and find its defining clause.

The word is followed by 'meaning clear and unblocked'.

The participle 'meaning' introduces an explicit synonymous explanation of the condition.

Anahtar Kavram

Identifying Synonymous Context Clues

Tahmini Süre:1m 0s

Soru 878Soru →

Match each complex verbal phrase with its correct algebraic expression representation.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The correct pairings match each complex verbal description with its respective mathematical translation: 'Twice the difference...' pairs with

2(3x - 7)

; 'Three times a number...' pairs with

(x + 5)^2 - 3x

; 'The quotient of...' pairs with

\frac{2x - 5}{x + 3}

; and 'The sum of...' pairs with

\frac{x + 4}{3x} - 8

.

Each verbal phrase contains specific operational keywords ('quotient', 'product', 'sum', 'difference') and ordering phrases ('subtracted from', 'less than'). Correct translation requires accurately identifying the operations, maintaining the proper sequence, and utilizing grouping symbols where compound expressions are modified.

Adım Adım Çözüm

1

Analyze the first phrase: 'Twice the difference when seven is subtracted from three times a number

x

'.

The phrase translates to

2(3x - 7)

.

The phrase 'subtracted from' reverses the order, making it

3x - 7

. 'Twice the difference' requires multiplying the entire grouping by 2.

2

Analyze the second phrase: 'Three times a number

x

subtracted from the square of five more than the number'.

The phrase translates to

(x + 5)^2 - 3x

.

The base quantity is 'five more than the number' (

x + 5

), which is then squared to become

(x + 5)^2

. Subtracting

3x

from this quantity gives the final expression.

3

Analyze the third phrase: 'The quotient of five less than twice a number

x

and three more than the number'.

The phrase translates to

\frac{2x - 5}{x + 3}

.

'Quotient' implies a division. The first part, 'five less than twice a number', forms the numerator (

2x - 5

). The second part, 'three more than the number', forms the denominator (

x + 3

).

4

Analyze the fourth phrase: 'The sum of a number

x

and four, divided by the product of three and the number, all decreased by eight'.

The phrase translates to

\frac{x + 4}{3x} - 8

.

The fraction is constructed with 'the sum' (

x + 4

) over 'the product' (

3x

). The phrase 'all decreased by eight' instructs to subtract 8 from the complete fraction.

Anahtar Kavram

Accurately identifying operational keywords and recognizing the correct order of translation for phrases like 'less than' and 'subtracted from'.

Tahmini Süre:2m 0s

Soru 879Soru →

Read the passage below:

Aviation maintenance protocols mandate inflating commercial aircraft tires with dry nitrogen rather than standard compressed ambient air. Ambient air contains fluctuating amounts of water vapor and oxygen, both of which introduce severe hazards under extreme flight cycles. At cruising altitudes exceeding 30,000 feet, ambient temperatures plummet below minus forty degrees, causing entrained moisture to freeze into ice crystals that disrupt wheel balance and damage valve stems. Conversely, during high-speed landings, friction heats the tire assemblies to temperatures where pressurized oxygen can sustain internal rubber combustion. By displacing oxygen and eliminating moisture, chemically inert nitrogen stabilizes internal pressure swings and prevents catastrophic thermal blowouts.

Based on the passage, match each excerpted statement to the author's specific communicative intent in including it.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Match the statement regarding fluctuating amounts of water vapor and oxygen to defining core chemical vulnerabilities; match the statement detailing subzero cruising temperatures and ice crystals to providing a concrete environmental example of physical risks; match the statement describing nitrogen's displacement of oxygen and moisture to summarizing how the mandated gas solves identified risks.

Each excerpt fulfills a distinct rhetorical stage in the author's explanatory argument: the first excerpt establishes the underlying chemical vulnerability, the second illustrates a specific operational hazard under extreme cold, and the third provides the comprehensive solution demonstrating why nitrogen is mandated.

Adım Adım Çözüm

1

Analyze the rhetorical role of the first excerpt regarding water vapor and oxygen components.

The statement sets up the problem by naming the two problematic elements of atmospheric air, functioning to define the chemical basis of the hazard.

Identifying the organizational structure helps determine why an author introduces a premise prior to supporting examples.

2

Examine the context and purpose of the cruising altitude excerpt.

The excerpt details specific flight conditions (below minus forty degrees) and mechanical consequences (ice crystals, wheel imbalance), serving as an illustrative example of cold-weather hazards.

Specific operational metrics and physical outcomes demonstrate supporting evidence rather than overarching claims.

3

Determine the function of the closing sentence regarding inert nitrogen.

The sentence synthesizes the entire argument by linking nitrogen's chemical properties to the prevention of the previously detailed failures.

Concluding statements typically resolve the conflict or explain the rationale behind the primary topic.

Anahtar Kavram

Inferring Rhetorical Function and Authorial Intent in Expository Text

Tahmini Süre:1m 15s

Soru 880Soru →

Match each algebraic expression with its simplified equivalent form.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

The matches are:

x^3 \cdot x^2

simplifies to

x^5

,

\frac{x^8}{x^2}

simplifies to

x^6

,

(x^4)^2

simplifies to

x^8

, and

x^{-3}

simplifies to

\frac{1}{x^3}

.

Each expression correctly pairs with its simplified form by applying the four fundamental rules of exponents: the product rule, the quotient rule, the power of a power rule, and the negative exponent rule.

Adım Adım Çözüm

1

Apply the product rule for exponents to

x^3 \cdot x^2

.

x^{3+2} = x^5

Multiplying identical bases requires adding the exponents.

2

Apply the quotient rule for exponents to

\frac{x^8}{x^2}

.

x^{8-2} = x^6

Dividing identical bases requires subtracting the denominator's exponent.

3

Apply the power rule for exponents to

(x^4)^2

.

x^{4 \cdot 2} = x^8

Raising an exponent to another power requires multiplying the exponents.

4

Apply the negative exponent rule to

x^{-3}

.

\frac{1}{x^3}

A negative exponent signifies the reciprocal of the corresponding positive exponent.

Anahtar Kavram

Operations with Variable Exponents

Tahmini Süre:1m 0s

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram