Examkin

Tüm alıştırma soruları

1884 soru

Tüm türler1,884Çoktan seçmeli962Çoklu seçim84Doğru / Yanlış379Sayısal32Eşleştirme249Sıralama178
Soru 1Soru →

Match each road user or vehicle type to its correct legal restriction or condition for motorway use under the UK Highway Code.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Learner car driver
Pedal cyclist
Agricultural tractor
Moped with an engine capacity under 50 cc

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Learner car drivers are permitted only when accompanied by an Approved Driving Instructor in a dual-controlled car; pedal cyclists are strictly prohibited as non-motorised road users; agricultural tractors are prohibited under agricultural vehicle restrictions; and mopeds under 50 cc are prohibited because their engine capacity falls below the minimum legal threshold.
Under UK Highway Code Rule 253, motorways must not be used by pedestrians, riders of motorcycles under 50 cc, cyclists, horse riders, and agricultural vehicles. Learner car drivers are only permitted on motorways when accompanied by an Approved Driving Instructor in a car fitted with dual controls.

Adım Adım Çözüm

1
Check the legal exception for provisional car licence holders
Learner car drivers are only allowed on motorways when accompanied by an Approved Driving Instructor (ADI) in a dual-controlled vehicle.
Highway Code Rule 253 permits learners under these specific supervised training conditions.
2
Identify prohibited non-motorised road users
Pedal cyclists, pedestrians, and horse riders are completely prohibited.
Vulnerable, slow-moving, non-motorised users cannot safely mix with high-speed motorway traffic.
3
Identify prohibited machinery and farm vehicles
Agricultural tractors are barred from motorway use.
Agricultural vehicles operate below safe motorway speed flows.
4
Apply engine capacity thresholds for powered two-wheelers
Mopeds and motorcycles under 50 cc are prohibited.
Vehicles with engine capacities below 50 cc lack the power and speed necessary for motorway travel.

Anahtar Kavram

Highway Code Rule 253 specifies which categories of road users and vehicles are prohibited from using motorways and defines the strict supervisory requirements for learner drivers.
Tahmini Süre:45s
Soru 2Soru →

When driving in an urban environment with an integrated tram network, how should you respond to different infrastructure features and hazards? Match each tramway scenario with the appropriate driver action required under the Highway Code.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Approaching a stationary tram at a roadside stop with no pedestrian refuge island
Operating a high-sided vehicle beneath overhead electrification lines
Steering across wet metal tram tracks embedded directly in the carriageway
Navigating a shared junction alongside an approaching tram

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Match stationary trams without islands to waiting behind without overtaking; high-sided vehicles under cables to checking clearance height signs; wet embedded tracks to crossing at right angles to prevent skidding; and approaching trams at shared junctions to giving way due to their inability to steer.
Each situation matches its designated safety precaution under the Highway Code: stationary trams without refuge islands require holding position behind the tram to protect embarking passengers; high vehicles must verify overhead clearance; wet steel rails require crossing near a right angle to prevent skids; and trams at shared junctions must be granted space because they cannot steer.

Adım Adım Çözüm

1
Evaluate passenger safety requirements at tram stops without pedestrian islands
Identify that overtaking is prohibited when passengers must cross the roadway directly to board or alight
Highway Code Rule 304 prioritizes passenger safety where no raised boarding platform exists
2
Assess overhead hazards associated with high-voltage electrification infrastructure
Identify the necessity of checking vehicle height against posted warning signs
Highway Code Rule 306 requires drivers of tall vehicles to prevent dangerous contact with overhead power lines
3
Determine vehicle control and handling risks on wet steel rails
Identify crossing rails at a right angle as the standard method to maintain tyre traction
Wet rails severely reduce friction, creating an acute skid and tramline tracking risk
4
Analyze tram maneuvering constraints at shared road junctions
Identify that trams cannot deviate from fixed rails and take significantly longer to stop
Highway Code Rule 307 highlights that trams lack steering capability and require generous priority and clearance

Anahtar Kavram

Highway Code regulations governing driver safety around tram infrastructure, passenger boarding zones, overhead cables, and rail friction hazards
Tahmini Süre:1m 30s
Soru 3Soru →

While approaching a sharp bend on a rural road, a driver depresses the clutch pedal and holds it down throughout the turn. What is the primary hazard associated with this driving habit?

Cevabı ve açıklamayı göster

Cevap: It removes engine braking resistance, reducing tyre grip balance and making steering control less predictable.

Cevap

It removes engine braking resistance, reducing tyre grip balance and making steering control less predictable.
Keeping the clutch pedal depressed (coasting) disconnects the engine from the transmission. This removes the steadying drag of engine braking, placing the entire burden of speed control on the footbrake, shifting tyre grip away from steering, and making the vehicle far less stable and responsive through a corner.

Adım Adım Çözüm

1
Analyse the physical state of the vehicle when coasting into a bend.
Holding the clutch down disconnects the engine from the driven wheels, eliminating engine braking resistance.
Engine braking naturally helps regulate forward momentum and maintain balanced weight distribution over all four tyres.
2
Evaluate the effect of disengaged drivetrain on steering and cornering dynamics.
Without engine drag, the vehicle tends to carry more momentum into the turn, requiring heavier footbrake usage and reducing the lateral grip available for steering.
Tyres have a finite amount of adhesion shared between braking and cornering forces.
3
Determine the resulting hazard to safe vehicle control.
Steering responsiveness becomes less predictable and the vehicle is significantly harder to stabilise if road grip changes.
Maintaining the correct gear before entering the bend ensures optimal stability, precise steering feel, and immediate throttle responsiveness.

Anahtar Kavram

Impact of Coasting on Steering and Vehicle Stability
Tahmini Süre:1m 30s
Soru 4Soru →

A car towing a trailer is permitted to use the right-hand lane of a motorway with three or more lanes to overtake slower traffic.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
According to the UK Highway Code, drivers of vehicles towing a trailer must not use the right-hand lane on a motorway that has three or more lanes in operation. Therefore, the statement claiming this is permitted is false.

Adım Adım Çözüm

1
Identify the vehicle configuration and the road setup in the statement.
The statement specifies a car towing a trailer on a motorway with three or more lanes.
Different lane regulations apply to specific vehicle classes and towing combinations on multi-lane motorways.
2
Recall UK Highway Code Rule 265 regarding motorway lane restrictions.
Vehicles towing a trailer are prohibited from using the right-hand lane when three or more lanes are in operation.
This regulation maintains traffic flow and prevents larger, speed-restricted vehicle combinations from obstructing the outermost overtaking lane.
3
Determine the validity of the statement.
The statement claims that such overtaking in the right-hand lane is permitted, which contradicts the legal rule.
Because the action is prohibited under standard conditions, the statement is false.

Anahtar Kavram

Motorway right-hand lane prohibitions for vehicles towing trailers
Tahmini Süre:45s
Soru 5Soru →

You are driving along a two-way road and come across a stationary refuse collection vehicle blocking your side of the carriageway. Just ahead of the vehicle, the road curves into a sharp blind bend. What is the safest course of action to take?

Cevabı ve açıklamayı göster

Cevap: Hold back behind the stationary vehicle and wait until you have a completely clear view ahead before overtaking.

Cevap

Hold back behind the stationary vehicle and wait until you have a completely clear view ahead before overtaking.
When a stationary obstruction blocks your side of the carriageway immediately before a blind bend, your forward view is severely restricted. You must hold back behind the obstruction and only overtake when you can clearly see that the road ahead is clear and it is safe to do so.

Adım Adım Çözüm

1
Identify the static hazard on your side of the road and recognize that the blind bend severely restricts your forward view of oncoming traffic.
Awareness that overtaking immediately would mean driving into an opposing lane without knowing if it is clear.
Safe driving requires knowing that the path ahead is entirely clear before committing to an overtaking manoeuvre.
2
Drop back to a safe following position behind the stationary vehicle.
Your vehicle remains safely on the left while giving you a wider viewing angle around the obstruction.
Hanging back increases your field of vision and prevents blocking oncoming traffic if a vehicle appears around the bend.
3
Wait patiently until the view around the bend is clear and no oncoming traffic is approaching before moving out.
The obstruction is passed safely without creating a hazard for other road users.
Drivers must never overtake a stationary obstruction unless they are certain the manoeuvre can be completed safely.

Anahtar Kavram

Dealing safely with stationary obstructions and restricted forward visibility
Tahmini Süre:1m 0s
Soru 6Soru →

A driver travelling at 60 mph on a dual carriageway disengages the clutch and selects neutral well before braking for a deceleration lane. Which TWO of the following are direct consequences of this action?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: The vehicle loses engine braking resistance, increasing the workload on the footbrake; Fuel consumption increases slightly compared to remaining in gear, as the engine must inject fuel to maintain idle

Cevap

Selecting neutral removes the vehicle's engine braking assistance—putting greater strain on the footbrake—and actually increases fuel consumption relative to overrun deceleration because modern engine control units must supply fuel to keep the engine idling.
Coasting disconnects the engine from the driveline, eliminating engine braking and placing the entire deceleration burden onto the footbrake. Furthermore, modern fuel-injected engines cut off fuel flow when decelerating with a gear engaged, meaning coasting in neutral actually uses more fuel to keep the engine idling.

Adım Adım Çözüm

1
Analyse the kinetic and mechanical effects of transmission disengagement at high speed.
With the clutch disengaged or neutral selected, the engine is disconnected from the driven wheels, eliminating engine compression resistance (engine braking).
This places sole deceleration responsibility on the friction brakes, increasing brake wear and operating temperatures.
2
Evaluate modern vehicle fuel management systems during coasting versus deceleration in gear.
Modern fuel-injected engines utilize deceleration fuel shut-off when the accelerator is released in gear, consuming zero fuel. In contrast, coasting in neutral forces the ECU to inject fuel to sustain idle RPM.
Coasting fails to save fuel and marginally increases consumption compared to properly utilizing overrun.
3
Evaluate electronic and safety system dependencies.
Safety systems like ABS and human reaction parameters (thinking distance) remain unaffected by gear selection.
Thinking distance is purely a function of human reaction speed and initial velocity, while ABS is independent of gearbox engagement.

Anahtar Kavram

Mechanics of Coasting and Engine Braking
Tahmini Süre:1m 30s
Soru 7Soru →

You are travelling at 70 mph in the left-hand lane of a motorway and plan to leave at the upcoming junction. At what point should you begin to reduce your speed?

Cevabı ve açıklamayı göster

Cevap: After you have moved onto the exit slip road (deceleration lane)

Cevap

You should begin to reduce your speed only after you have moved onto the exit slip road (deceleration lane).
According to Highway Code Rule 272, drivers should maintain their normal cruising speed on the main carriageway and only decelerate once they have entered the exit slip road. The slip road is specifically designed to give adequate distance for vehicles to slow down safely without creating a hazard for high-speed motorway traffic behind.

Adım Adım Çözüm

1
Position your vehicle in the left-hand lane well before the exit and signal left in good time.
You clearly communicate your intention to leave without disrupting the flow of traffic.
Highway Code Rule 272 requires drivers to move into the left-hand lane well before the exit junction.
2
Maintain normal cruising speed on the main carriageway past the countdown markers until filtering onto the slip road.
Vehicles following behind on the motorway are not forced to brake abruptly.
Braking on a high-speed live lane creates a severe collision risk and causes traffic flow disruption.
3
Apply the brakes and adjust down to the lower speed limit once safely within the deceleration lane.
Your speed is reduced safely before reaching the junction roundabout or connecting road.
The slip road is designed specifically as a deceleration zone.

Anahtar Kavram

Motorway Exit Deceleration and Speed Management (Highway Code Rule 272)
Tahmini Süre:45s
Soru 8Soru →

You are driving along a level road covered in compacted snow and ice. Why should you drive at a slow speed in the highest practical gear?

Cevabı ve açıklamayı göster

Cevap: It reduces engine torque delivered to the driven wheels, helping to prevent wheelspin

Cevap

Driving in the highest practical gear reduces engine torque delivered to the driven wheels, helping to prevent wheelspin.
On ice and snow, tyre grip is minimal. Driving in the highest practical gear keeps engine revolutions low and dampens the torque delivered to the driving wheels. This smoother application of power helps prevent the wheels from spinning and losing traction.

Adım Adım Çözüm

1
Identify the primary vehicle handling challenge when driving on icy or snow-covered surfaces
Tyre grip is severely compromised, meaning excess power sent to the driven wheels will easily break traction and induce wheelspin.
Compact snow and ice provide minimal friction between the tyres and the road surface.
2
Evaluate the mechanical effect of gear selection on wheel torque
Higher gears provide lower engine torque multiplication at the wheels compared to low gears.
Lower wheel torque allows gentler power delivery, making it easier to keep the tyres within their limited grip threshold.

Anahtar Kavram

Using a higher gear at low speeds reduces torque at the driven wheels to avoid wheelspin on slippery surfaces.
Tahmini Süre:1m 0s
Soru 9Soru →

You are driving along a major trunk road in the early afternoon and notice that you are yawning frequently and struggling to concentrate on the traffic ahead. What should you do to safely manage this fatigue?

Cevabı ve açıklamayı göster

Cevap: Find a safe place to stop, drink two cups of caffeinated coffee, and take a short 15-minute nap.

Cevap

Find a safe place to stop, drink two cups of caffeinated coffee, and take a short 15-minute nap.
According to The Highway Code, the most effective way to counter sleepiness while on a journey is to pull over in a safe place, drink two cups of caffeinated coffee or an equivalent caffeinated drink, and take a short nap of about 15 minutes while the caffeine takes effect.

Adım Adım Çözüm

1
Identify the symptoms of driver fatigue
Recognise that frequent yawning and loss of concentration indicate dangerous levels of tiredness
Continuing to drive while drowsy significantly impairs reaction times and increases collision risk
2
Apply the official Highway Code countermeasure for driver sleepiness
Stop at a safe location, consume caffeinated beverages, and rest for approximately 15 minutes
A short nap combined with caffeine is the only effective short-term countermeasure to restore necessary alertness

Anahtar Kavram

Highway Code guidelines for managing driver sleepiness and fatigue
Tahmini Süre:45s
Soru 10Soru →

As you approach a bus that has pulled in at a roadside stop in a busy shopping area, which action should you take to safely manage potential pedestrian hazards?

Cevabı ve açıklamayı göster

Cevap: Reduce your speed and watch carefully for passengers stepping out from behind or in front of the vehicle to cross the road

Cevap

Reduce your speed and watch carefully for passengers stepping out from behind or in front of the vehicle to cross the road.
When passing a stationary bus at a bus stop, pedestrians who have just alighted often cross directly in front of or behind the vehicle where they are hidden from view. Reducing your speed and anticipating hidden pedestrians provides the time and braking distance necessary to stop safely if someone suddenly steps into the carriageway.

Adım Adım Çözüm

1
Identify the static hazard and recognise that the stationary bus creates a major visual blind spot.
Driver recognises that passengers leaving the bus may not be visible from the normal driving position.
Large vehicles mask footway activity and conceal pedestrians attempting to cross.
2
Ease off the accelerator, reduce vehicle speed, and cover the brake pedal.
Stopping distance is significantly shortened, allowing an immediate controlled stop if needed.
Pedestrians often step directly into the road without checking for approaching traffic.
3
Scan the kerb, underneath the vehicle body for pedestrian feet, and around both ends of the bus.
Early detection of any developing pedestrian movement across the carriageway.
Proactive observation enables safe passage without harsh braking or collisions.

Anahtar Kavram

Anticipating pedestrian movement and blind spots around stationary public service vehicles
Tahmini Süre:1m 0s
Soru 11Soru →

On a road marked with double white lines where the line nearest to your vehicle is solid, you are permitted to cross the solid line to overtake a pedal cycle travelling at 10 mph or less, provided the manoeuvre can be completed safely.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True
The statement is correct because Highway Code Rule 129 explicitly allows drivers to cross or straddle a solid white line on their side of the road to pass a pedal cycle, horse rider, or road maintenance vehicle moving at 10 mph (16 km/h) or less, or to pass a stationary vehicle, as long as the road is clear and it is safe to do so.

Adım Adım Çözüm

1
Identify the primary legal restriction for double white lines where the nearest line is solid.
Highway Code Rule 129 states that drivers must not cross or straddle a continuous white line on their side of the carriageway as a general rule.
Establishing the standard prohibition creates the legal baseline for evaluating exemptions.
2
Assess the statutory exemptions permitted under Rule 129.
Drivers may cross the solid line if safe to enter adjoining premises, turn into a side road, pass a stationary vehicle, or overtake a pedal cycle, horse, or road maintenance vehicle moving at 10 mph or less.
Exemptions prevent unreasonable and hazardous congestion behind exceptionally slow or stationary obstructions.
3
Apply the exemption criteria to the situation described in the statement.
The statement specifies overtaking a pedal cycle travelling at 10 mph or less when safe, which matches the exact legal exception in Rule 129.
Matching the condition to the legal rule confirms the statement is true.

Anahtar Kavram

Highway Code Solid White Line Overtaking Exceptions
Soru 12Soru →

You are preparing to drive home after finishing a strenuous work shift, but you feel completely exhausted and are struggling to stay awake. What should you do before getting behind the wheel?

Cevabı ve açıklamayı göster

Cevap: Delay your journey until you have rested and had sufficient sleep

Cevap

Delay your journey until you have rested and had sufficient sleep
According to the Highway Code, you must never begin a journey if you are feeling tired or exhausted. The only safe action is to delay setting off until you have had adequate rest and sleep.

Adım Adım Çözüm

1
Assess driver fitness before starting the trip
Recognise that severe exhaustion impairs judgment, reaction times, and vehicle control
The Highway Code explicitly states that drivers must ensure they are fit to drive before embarking on any journey
2
Select the only safe and lawful course of action
Postpone driving until adequate sleep and rest have been obtained
Fatigue cannot be resolved by driving techniques or rushing; sleep is essential to restore alertness

Anahtar Kavram

Pre-journey fitness to drive and driver fatigue prevention
Tahmini Süre:40s
Soru 13Soru →

Maintaining tyre safety is essential for roadworthiness and vehicle control under UK driving regulations. Match each tyre condition or scenario to its corresponding safety requirement or legal rule.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Checking baseline tyre pressure during regular maintenance
Preparing a car to carry maximum passenger and luggage weight
Driving with a temporary space-saver spare wheel fitted
Assessing tyre tread legality across the central three-quarters of the tread

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Baseline checks require cold tyre measurement; heavy loads require higher tyre pressure; space-saver wheels require speed restriction to 50 mph; and tread legality requires at least 1.6 mm depth across the central three-quarters and entire outer circumference.
Each scenario directly pairs with its statutory rule or manufacturer maintenance guideline: cold tyre pressure checks avoid inflated thermal readings, heavy loads demand higher tyre pressures, space-saver spares carry a strict 50 mph limit, and legal car tread depth must be at least 1.6 mm across the central three-quarters and around the complete circumference.

Adım Adım Çözüm

1
Identify the standard maintenance protocol for tyre pressure checks
Matched regular baseline checks with testing tyres cold
Air expands when warm, so checking cold ensures an accurate reading without false high pressure values.
2
Determine the necessary adjustment when transporting maximum cargo or passengers
Matched maximum vehicle load with inflating tyres to higher manufacturer specifications
Extra weight increases tyre flexing and rolling resistance, requiring higher pressure to maintain structural integrity and handling.
3
Recall the legal and mechanical restrictions on emergency space-saver tyres
Matched space-saver wheel use with the 50 mph maximum speed restriction
Space-saver tyres have smaller contact patches and reduced grip, making them suitable only for temporary low-speed driving.
4
Apply the statutory UK tyre tread requirements for passenger cars
Matched central three-quarters tread assessment with the 1.6 mm minimum depth mandate
The Road Vehicles (Construction and Use) Regulations require 1.6 mm continuous tread depth across the central 75% of the tyre and around its whole circumference.

Anahtar Kavram

Tyre safety maintenance standards, load adjustments, emergency wheel limits, and statutory tread depth limits under UK driving law.
Tahmini Süre:1m 0s
Soru 14Soru →

You are driving at 30 mph along a narrow rural lane bounded by high hedges. Ahead, you observe a horse and rider travelling in your direction, while simultaneously spotting the roofline of an oncoming vehicle approaching a pinch point just beyond them. Arrange the following driver actions in the correct chronological sequence to manage these combined hazards safely.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct defensive sequence is: first check mirrors to assess following traffic, ease off the accelerator early to smoothly bleed off speed, hold back at a safe distance behind the horse and rider, and finally bring the vehicle to a gentle stop with low engine revs to allow the oncoming vehicle to clear the pinch point.
Applying the standard Hazard Management Routine requires early observation (checking mirrors) before altering vehicle dynamics, followed by smooth deceleration, positioning well back to give vulnerable animals space, and coming to a complete, calm halt while oncoming traffic negotiates the bottleneck.

Adım Adım Çözüm

1
Check rear-view and exterior mirrors.
Driver establishes situational awareness of vehicles following closely behind.
Before adjusting speed or lane position for an emerging forward hazard, checking mirrors ensures following road users are accounted for.
2
Ease off the throttle to decelerate smoothly.
The vehicle gradually reduces speed without jarring braking forces.
Gradual deceleration gives trailing vehicles sufficient time to respond and prevents loud braking noises that can startle horses.
3
Establish a generous holding distance behind the horse and rider.
A safety cushion is maintained without encroaching on the horse's space.
Horses are vulnerable and easily spooked; hanging back maintains a wide buffer and keeps sightlines open.
4
Come to a complete stop and keep engine revs low until the road is clear.
The oncoming vehicle clears the narrow section without risk of a side-swipe or startling the animal.
Pinch points cannot accommodate multiple vehicles alongside vulnerable road users, necessitating waiting stationary until it is safe to pass wide and slow.

Anahtar Kavram

Defensive Hazard Sequencing for Vulnerable Road Users and Restricted Carriageways
Tahmini Süre:1m 20s
Soru 15Soru →

Match each specific scenario involving children or school zones to the corresponding legal requirement or correct defensive driving action as outlined in the Highway Code.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

A School Crossing Patrol steps into the road displaying a 'STOP' sign, while you approach from the opposite direction on a wide two-way road.
A stationary vehicle on the opposite side of a single carriageway displays a yellow 'School Bus' sign and its hazard warning lights.
A child stands near a zebra crossing, and an adult on the pavement gestures for the child to cross ahead of your approaching vehicle.
Twin flashing amber lights operate beneath a 'School' warning triangle, but no mandatory 20 mph roundel is displayed.

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

The correct matching requires distinguishing between absolute statutory duties (such as stopping for crossing patrols in both directions) and critical hazard anticipation (such as reducing speed for school buses, anticipating a child following another's signal, and responding correctly to amber warning lights).
Each pair correctly synthesizes a subtle observational cue with the precise defensive action or legal requirement dictated by the Highway Code regarding vulnerable child pedestrians.

Adım Adım Çözüm

1
Analyze the School Crossing Patrol scenario.
Matched with the absolute legal mandate to stop.
The Highway Code requires all traffic, regardless of direction, to stop when the sign is displayed.
2
Analyze the School Bus scenario.
Matched with reducing speed and anticipating pupils running out.
Large vehicles create significant blind spots, and hazard lights specifically warn of boarding/alighting children.
3
Analyze the Pedestrian gesturing scenario.
Matched with preparing to stop due to the child acting on the gesture.
Children lack mature traffic judgement and will often obey an adult's gesture without verifying that the road is actually clear.
4
Analyze the Amber lights scenario.
Matched with heightened vigilance and appropriate speed reduction without a legally enforced limit.
Twin flashing ambers are a severe warning hazard, but unlike a red circular sign, they do not establish a statutory speed limit on their own.

Anahtar Kavram

Advanced Hazard Anticipation and Legal Obligations Around Children
Soru 16Soru →

As you drive past a recreation ground, you notice an ice cream van parked at the kerb with several young children gathering around it. What is the safest and most effective way to manage the risks in this situation?

Cevabı ve açıklamayı göster

Cevap: Slow down considerably, look for movement underneath and between parked vehicles, and be ready to stop at short notice.

Cevap

Slow down considerably, look for movement underneath and between parked vehicles, and be ready to stop at short notice.
Children near ice cream vans, school gates, and play parks are particularly vulnerable because excitement and distraction impair their attention to road traffic. The safe course of action according to the Highway Code is to significantly reduce speed, scan actively beneath vehicles to spot early signs of pedestrian presence, and maintain preparedness to stop immediately.

Adım Adım Çözüm

1
Identify the vulnerable road users and environmental obstructions.
Recognised that children near an ice cream van are highly excited, easily distracted, and frequently masked by the vehicle bodywork.
Children often lack mature hazard awareness and may dash across the carriageway without checking for traffic.
2
Implement proactive defensive driving and scanning techniques.
Reduced vehicle speed, covered the brake pedal, and scanned low under chassis lines and between parked vehicles for feet or shadows.
Looking low through wheels and underneath vehicles reveals approaching pedestrians before their upper bodies emerge from behind blind spots.

Anahtar Kavram

Child pedestrian hazard anticipation and defensive speed adjustment near high-risk stationary vehicles.
Tahmini Süre:1m 0s
Soru 17Soru →

During a heavy rain shower, a driver notices that their vehicle takes significantly longer to come to a halt after the brakes are applied. What vehicle or environmental factor is responsible for increasing the braking distance in this situation?

Cevabı ve açıklamayı göster

Cevap: Severely worn tyre tread reducing the tyres' ability to disperse surface water

Cevap

Severely worn tyre tread reducing the tyres' ability to disperse surface water
Braking distance is the distance a vehicle travels from the moment the brakes are applied until it comes to a complete stop. On wet roads, tyres require adequate tread depth to channel water away from the road surface. Worn tyres dramatically reduce grip, extending the distance needed for the vehicle to stop.

Adım Adım Çözüm

1
Distinguish between thinking distance and braking distance components of stopping distance.
Thinking distance depends strictly on driver reaction time (e.g., fatigue, alcohol, distractions), whereas braking distance depends on vehicle condition and road grip.
The question specifically asks about the factor responsible for increasing the distance travelled after the brakes are pressed.
2
Evaluate the effect of tyre condition on wet road friction.
Tyre tread grooves channel water away from the contact patch; worn tread leads to aquaplaning and reduced friction against the wet road surface.
Reduced friction directly degrades deceleration capability, resulting in a significantly longer braking distance.

Anahtar Kavram

Factors specifically affecting braking distance include vehicle condition (tyres, brakes, suspension, weight) and road surface conditions (wet, icy, loose gravel), as opposed to driver-related thinking factors.
Tahmini Süre:1m 0s
Soru 18Soru →

While navigating a narrow country road, you catch up with two horse riders travelling side by side towards a blind brow. The rider on the outside signals with an outstretched right arm moving slowly up and down. What is the safest and most appropriate action to take?

Cevabı ve açıklamayı göster

Cevap: Hold back at a safe distance, keep your speed under 10 mph without revving the engine, and wait to pass until visibility clears beyond the brow.

Cevap

Hold back at a safe distance, keep your speed under 10 mph without revving the engine, and wait to pass until visibility clears beyond the brow.
Under Highway Code Rule 215, drivers must pass horse riders slowly at 10 mph or less, leave at least 2 metres of clearance, and keep engine noise to a minimum. When riders are riding side by side (which is permissible, especially to protect novice riders or nervous horses) or when approaching a hazard such as a blind brow, drivers must hold back patiently and not attempt an overtake until it is safe.

Adım Adım Çözüm

1
Interpret the hazard and the rider's physical signal.
Recognise that the rider's arm moving up and down means you must slow down, and that riding two abreast is often done to protect a less experienced horse or rider.
Horse riders use standard hand signals to communicate safety requirements to approaching drivers.
2
Assess the road geometry ahead.
Identify that an overtake cannot be safely completed before a blind brow due to zero oncoming visibility.
Passing on a blind summit risks a head-on collision with oncoming vehicles.
3
Apply Highway Code Rule 215 guidelines for passing horses.
Keep speed below 10 mph, avoid revving the engine or sounding the horn, maintain ample following distance, and hold back until the road ahead is completely clear with at least 2 metres of passing space.
Horses are easily spooked by sudden movements and engine noise, requiring calm and patient driving.

Anahtar Kavram

Highway Code Rule 215: Safe speed, distance, and noise management when encountering horse riders and animals on rural roads.
Tahmini Süre:1m 30s
Soru 19Soru →

When planning a long road trip, how should you schedule rest stops to prevent fatigue and drive safely?

Cevabı ve açıklamayı göster

Cevap: Plan a rest break of at least 15 minutes after every two hours of driving

Cevap

Plan a rest break of at least 15 minutes after every two hours of driving.
According to Highway Code Rule 91, drivers should plan their journeys carefully and take a minimum break of at least 15 minutes after every two hours of driving. Regular breaks allow drivers to refresh, move around, and maintain the necessary level of alertness.

Adım Adım Çözüm

1
Identify the Highway Code guideline for journey planning and driver fatigue prevention.
Drivers are advised to plan regular rest stops during extended trips.
Fatigue significantly impairs reaction time, alertness, and hazard perception.
2
Apply the standard recommended rest interval to the journey schedule.
A minimum 15-minute break is required after every two hours of continuous driving.
Regular intervals of rest and fresh air help sustain driver concentration and prevent drowsiness.

Anahtar Kavram

Highway Code rest break guidelines for fatigue prevention during long journeys
Tahmini Süre:45s
Soru 20Soru →

How will driving with tyres that are significantly under-inflated affect your vehicle?

Cevabı ve açıklamayı göster

Cevap: Fuel consumption will increase and braking distance will be extended

Cevap

Fuel consumption will increase and braking distance will be extended.
When tyres are under-inflated, the increased flexing of the tyre casing creates higher rolling resistance, which increases vehicle fuel consumption. Additionally, the deformed contact patch reduces effective braking grip and directional stability, leading to longer braking distances and potentially uneven shoulder wear.

Adım Adım Çözüm

1
Evaluate the mechanical effect of low tyre pressure on rolling resistance and fuel economy.
Under-inflated tyres flex excessively and generate high rolling resistance, forcing the engine to work harder and consume more fuel.
Maintaining correct pressure minimizes drag and optimizes energy efficiency.
2
Evaluate the effect of low tyre pressure on tyre grip, stability, and stopping distance.
The contact patch becomes uneven with pressure concentrating on the shoulders, reducing optimal grip under heavy braking and lengthening stopping distances.
Correct inflation pressure is essential for even contact distribution and maximum braking performance.

Anahtar Kavram

Consequences of tyre under-inflation on vehicle efficiency and safety
Tahmini Süre:45s
Sayfa 1 / 95Sonraki