Examkin

Tüm alıştırma soruları

1884 soru

Tüm türler1,884Çoktan seçmeli962Çoklu seçim84Doğru / Yanlış379Sayısal32Eşleştirme249Sıralama178
Soru 21Soru →

You are driving on a rural road and approach a horse and rider travelling ahead in your lane. Arrange the driver's actions in the correct sequential order from first to last to pass them safely according to The Highway Code.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

Gradually reduce speed to under 10 mph and hold back, wait for a clear forward view free of oncoming hazards, overtake with at least 2 metres clearance at low engine revs, and confirm via rear-view mirror before returning to your lane.
According to Highway Code Rule 215, drivers approaching horse riders must first reduce speed to under 10 mph and hold back, wait for a completely clear overtaking opportunity without oncoming traffic, pass giving at least 2 metres of space while keeping engine revs low, and finally confirm clearance in the rear-view mirror before smoothly moving back into lane.

Adım Adım Çözüm

1
Decelerate early and smoothly to under 10 mph while keeping well back from the horse.
Vehicle approaches calmly without sudden brake lights or close proximity that could spook the animal.
Highway Code Rule 215 specifies that drivers must slow down when approaching horses to prevent unpredictable reactions.
2
Hold your position behind the horse and observe the road ahead for oncoming traffic and visibility obstructions.
A safe overtaking window is established before crossing the centre line.
Passing without full forward visibility risks a head-on collision or being forced back into the horse.
3
Move out wide across the lane, maintaining at least 2 metres of separation at low engine revs.
The vehicle clears the rider with safe lateral clearance and minimal noise disturbance.
Highway Code Rule 215 requires passing horse riders at under 10 mph and allowing at least 2 metres of space.
4
Check the interior mirror and steer smoothly back into the left lane once well clear of the horse.
The overtaking manoeuvre is safely completed without cutting in.
Returning too sharply or early can frighten the animal or clip the rider.

Anahtar Kavram

Highway Code Rule 215 horse rider overtaking procedure
Tahmini Süre:1m 15s
Soru 22Soru →

You are driving along a residential street with cars parked on the left-hand side. A cyclist ahead moves out towards the centre of your lane to pass the parked vehicles. How should you respond?

Cevabı ve açıklamayı göster

Cevap: Stay behind and leave plenty of room for the cyclist to pass the parked vehicles safely

Cevap

Stay behind and leave plenty of room for the cyclist to pass the parked vehicles safely
Cyclists often ride further out into the road when passing parked cars to keep clear of opening doors and emerging pedestrians. Drivers should anticipate this movement, hold back patiently, and allow the cyclist sufficient room rather than trying to force an overtake.

Adım Adım Çözüm

1
Identify the static hazard presented by the line of parked cars
Recognise that parked cars can present sudden hazards such as opening doors or pedestrians emerging between vehicles
Cyclists must move out into the centre of the lane to avoid riding in the dangerous door zone of parked cars
2
Select the appropriate driving response to support the vulnerable road user
Hold back at a safe distance until the cyclist has safely cleared the parked vehicles and a safe overtaking opportunity arises
Patience and giving adequate clearance protect vulnerable road users from collision risks

Anahtar Kavram

Vulnerable Road Users - Cyclists and Parked Vehicle Hazards
Tahmini Süre:45s
Soru 23Soru →

While carrying out a routine inspection of your vehicle, you notice excessive tread wear concentrated along only the inside edge of one front tyre, while the rest of the tread pattern is worn evenly and remains well within legal limits. What is the most likely cause of this specific wear pattern?

Cevabı ve açıklamayı göster

Cevap: Incorrect front wheel alignment (tracking)

Cevap

Incorrect front wheel alignment (tracking) is the most likely cause of uneven wear along a single edge of a tyre.
Incorrect wheel alignment (tracking) or suspension defects cause the wheels to run out of true alignment with the vehicle's direction of travel. This drags the tyre sideways as it rolls, creating heavy friction and rapid wear along just one edge.

Adım Adım Çözüm

1
Analyze the observed tyre wear pattern from the inspection scenario.
The tyre exhibits isolated wear on one edge (the inner shoulder), while the rest of the tread shows normal, even depth.
Differentiating between symmetrical and asymmetrical wear patterns helps isolate mechanical faults from tyre pressure issues.
2
Identify the vehicle fault associated with single-edge tyre scrubbing.
Steering misalignment or improper tracking causes the wheel to point slightly inward or outward relative to the straight-ahead position, constantly dragging one edge across the road.
Uneven single-edge wear points directly to tracking or suspension misalignment rather than inflation pressure anomalies.

Anahtar Kavram

Tyre wear diagnostics and wheel alignment (tracking)
Tahmini Süre:1m 0s
Soru 24Soru →

You notice signs of fatigue while driving on a dual carriageway. Arrange the following steps in the correct chronological order to follow the recommended safety procedure for managing driver tiredness.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

Leave the road at a safe location, drink two caffeinated beverages, take a short 15-minute nap, and confirm you are fully alert before driving again.
The Highway Code advises drivers who feel sleepy to leave the carriageway at a safe location, drink two cups of caffeinated coffee or a high-caffeine drink, take a short nap of around 15 minutes while waiting for the caffeine to take effect, and verify they feel refreshed before continuing.

Adım Adım Çözüm

1
Exit the road at a safe parking location or service area.
The vehicle is stationary in a safe place off the active roadway.
Driver fatigue countermeasures must only be carried out once parked safely off the main road.
2
Consume two cups of caffeinated coffee or an equivalent high-caffeine drink.
Caffeine is ingested to aid alertness.
Caffeine takes around 15 to 20 minutes to reach peak effectiveness in the bloodstream.
3
Rest and nap for about 15 minutes.
Acute sleepiness is reduced as the caffeine begins to act.
A short nap combined with caffeine intake is the proven procedure recommended by official driving guidelines.
4
Assess your condition before resuming driving.
Confirmation that alertness is restored.
Driving must not resume if drowsiness or impaired concentration persists.

Anahtar Kavram

Highway Code recommended procedural countermeasures for driver tiredness
Soru 25Soru →

In Great Britain, newly qualified drivers are legally required to display green 'P' plates on their vehicle for at least six months after passing their driving test.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. Displaying green 'P' plates after passing the practical driving test is voluntary in Great Britain, not a legal requirement.
In Great Britain, displaying green 'P' plates is optional. Drivers may display them voluntarily to encourage other road users to show extra patience and understanding while they gain confidence, but there is no legal obligation to do so.

Adım Adım Çözüm

1
Identify the vehicle status indicator referenced in the statement.
The statement specifies green 'P' (probationary) plates for newly qualified drivers.
Learner drivers and newly qualified drivers have different legal rules governing plate display.
2
Determine the legal status of green 'P' plates under UK road traffic law.
Green 'P' plates are optional and may be used for any duration chosen by the driver.
While red 'L' plates are mandatory for learner drivers, 'P' plates are solely an advisory measure to inform other road users of inexperience.
3
Evaluate the validity of the statement.
The claim of a legal requirement is incorrect.
Because there is no compulsory requirement to display 'P' plates for six months or any other timeframe, the statement is false.

Anahtar Kavram

Probationary ('P') plate regulations and voluntary usage for newly qualified drivers in Great Britain
Tahmini Süre:30s
Soru 26Soru →

Driving through a busy town centre, you observe exhaust fumes rising from the tailpipe of a parked car ahead whose front wheels are angled outwards towards your lane. What hazard should you anticipate?

Cevabı ve açıklamayı göster

Cevap: The vehicle is preparing to pull out into your lane of traffic

Cevap

You should anticipate that the parked vehicle is preparing to move off from the kerb into your lane of traffic.
Recognising early clues such as exhaust smoke (showing the engine is running) and wheels turned outward towards the carriageway allows you to anticipate that the vehicle is about to pull away from the kerb. Anticipating this early gives you time to check your mirrors, reduce your speed, and prepare to stop if necessary.

Adım Adım Çözüm

1
Identify visual cues from stationary vehicles ahead
Exhaust smoke indicates the engine is running, and angled front wheels show intended steering direction into the road
Early detection of subtle hazard indicators gives you more time to react appropriately
2
Evaluate potential vehicle movements and driver limitations
Recognise that the vehicle may pull out suddenly, potentially without the driver checking their blind spot
Defensive driving requires anticipating potential conflicts before they physically develop into emergencies
3
Formulate a proactive driving response
Check mirrors, ease off the accelerator to reduce speed, and create a safe safety cushion
Adjusting speed and position early prevents the need for sudden, harsh braking

Anahtar Kavram

Identifying early visual cues of developing hazards from stationary vehicles
Tahmini Süre:45s
Soru 27Soru →

You are driving along a busy urban street with a line of parked vehicles on your left. You spot a pedestrian carrying a white stick with red bands standing between two parked cars, appearing ready to cross. Simultaneously, you are aware of a cyclist riding closely behind you. As the pedestrian begins to step onto the carriageway, which of the following represents the safest and most appropriate hazard management strategy?

Cevabı ve açıklamayı göster

Cevap: Gradually reduce your speed while checking your mirrors and blind spots for the cyclist, and stop safely to allow the pedestrian ample time to cross.

Cevap

Gradually reduce your speed while checking your mirrors and blind spots for the cyclist, and stop safely to allow the pedestrian ample time to cross.
The correct response effectively manages multiple concurrent hazards. It recognizes that a white stick with red bands signifies a deafblind pedestrian who needs extra time and cannot detect vehicles. By gradually reducing speed and checking mirrors and blind spots, the driver protects the pedestrian while preventing a rear-end collision with the following cyclist.

Adım Adım Çözüm

1
Identify the vulnerable road user's specific needs.
Recognize that a white stick with red bands indicates the pedestrian is deafblind.
This means the pedestrian cannot see or hear the approaching vehicle, requiring maximum driver anticipation and patience.
2
Assess the surrounding hazards, including the static and moving elements.
Note the parked cars restricting visibility and the cyclist closely following behind.
Parked cars are static hazards that can hide pedestrians, and abrupt braking could cause the following cyclist to crash into the rear of your vehicle.
3
Execute a coordinated and safe driving response.
Check mirrors and blind spots, then brake progressively to stop safely for the pedestrian.
This sequence ensures the safety of the deafblind pedestrian while actively preventing a collision with the vulnerable cyclist behind.

Anahtar Kavram

Managing multiple hazards when encountering deafblind pedestrians
Soru 28Soru →

Driving at a sustained speed of 70 mph can increase a vehicle's fuel consumption by up to 30% compared to driving at 50 mph.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True. Driving at 70 mph uses up to 30% more fuel than driving at 50 mph due to the sharp increase in aerodynamic drag.
The statement is true because air resistance rises rapidly as vehicle speed increases. Overcoming this higher aerodynamic drag requires greater engine power output, causing fuel consumption to increase by up to 30% at 70 mph compared to 50 mph.

Adım Adım Çözüm

1
Examine the physical relationship between vehicle road speed and aerodynamic drag.
Aerodynamic resistance increases exponentially as vehicle speed rises, meaning the power required to push the car through the air at 70 mph is considerably higher than at 50 mph.
Air resistance is the primary resistive force acting on a vehicle at motorway speeds.
2
Evaluate the fuel consumption differential established by DVSA eco-safe driving benchmarks.
The extra engine load needed to overcome increased air resistance results in up to a 30% increase in fuel consumption when cruising at 70 mph compared to 50 mph.
Fuel injection rates must increase to maintain engine power output against higher aerodynamic forces.
3
Determine the accuracy of the statement.
The statement matches official DVSA figures and environmental guidelines exactly.
Maintaining moderate, legal cruising speeds directly reduces fuel burn and carbon emissions.

Anahtar Kavram

Vehicle Speed, Aerodynamic Resistance, and Fuel Consumption
Tahmini Süre:45s
Soru 29Soru →

Match each road scenario or infrastructure feature concerning older and disabled road users with its corresponding Highway Code rule or significance.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Class 2 powered wheelchair or mobility scooter
Class 3 mobility scooter travelling on an unrestricted dual carriageway
Tactile paving with raised blister studs at a pedestrian crossing
An older pedestrian who has already started crossing a side road you intend to turn into

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Class 2 mobility scooters match with being limited to 4 mph for pavement use; Class 3 mobility scooters on unrestricted dual carriageways match with the mandatory flashing amber beacon; tactile blister paving matches with providing guidance to visually impaired pedestrians at kerb edges; and pedestrians already crossing a side road match with having priority to complete their crossing without being hurried.
Each feature and scenario aligns directly with UK Highway Code provisions: Class 2 invalid carriages have a 4 mph limit for pavement use; Class 3 invalid carriages must use a flashing amber light on dual carriageways where the speed limit exceeds 50 mph; raised tactile blister paving alerts visually impaired individuals to the edge of the footway; and turning drivers must yield priority to pedestrians already crossing a junction.

Adım Adım Çözüm

1
Identify the regulations governing powered mobility vehicles.
Class 2 scooters are limited to 4 mph on pavements, whereas Class 3 vehicles (up to 8 mph) require a flashing amber beacon on high-speed dual carriageways.
Different classes of mobility vehicles have distinct legal speed restrictions and lighting requirements depending on the road type.
2
Analyze accessibility infrastructure designed for sensory-impaired pedestrians.
Raised blister paving provides tactile warnings for visually impaired pedestrians at crossing points.
Tactile surfaces convey critical physical safety boundaries when sight is impaired.
3
Apply junction priority rules regarding vulnerable road users.
Pedestrians who have started crossing a side road have priority over turning motor vehicles.
Highway Code Rule H2 establishes that drivers turning into a side road must give way to pedestrians crossing the road.

Anahtar Kavram

Highway Code rules, legal categories, and infrastructure provisions protecting older and disabled road users.
Tahmini Süre:1m 15s
Soru 30Soru →

A qualified driver supervising a learner driver from the passenger seat is legally subject to the same alcohol limits and drink-drive penalties as if they were physically driving the vehicle.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True. A qualified driver supervising a provisional licence holder is legally considered in charge of the vehicle and must adhere to the same alcohol limits and legal penalties as an active driver.
The statement is true because UK road traffic law establishes that an accompanying driver supervising a learner driver is legally in charge of the vehicle. Consequently, the supervisor must remain strictly within legal alcohol limits and faces identical legal penalties, including mandatory driving bans and heavy fines, if found over the prescribed limit.

Adım Adım Çözüm

1
Identify the legal status of an accompanying supervisor under UK road traffic law.
A person supervising a learner driver is legally classified as being in charge of the motor vehicle.
Effective supervision requires full cognitive alertness, hazard perception, and the physical readiness to intervene if necessary.
2
Determine how drink-driving regulations apply to a person in charge of a vehicle.
The statutory alcohol limits for breath, blood, and urine apply directly to the supervisor.
The law prohibits being in charge of a vehicle while over the legal limit or unfit through drink or drugs.
3
Evaluate the truth value of the statement regarding penalties and legal limits.
The statement is true.
Failure to comply exposes the supervisor to mandatory driving disqualification, endorsements, and fines identical to those faced by an impaired driver.

Anahtar Kavram

Legal responsibilities and alcohol limits applicable to supervising drivers
Tahmini Süre:45s
Soru 31Soru →

You are driving in rainy weather on a dual carriageway and decide to overtake a slower vehicle ahead. What should you do to carry out this manoeuvre safely and courteously?

Cevabı ve açıklamayı göster

Cevap: Maintain an increased separation distance, check mirrors and blind spots, and move out only when a safe gap exists

Cevap

Maintain an increased separation distance, check mirrors and blind spots, and move out only when a safe gap exists
According to The Highway Code, stopping distances in wet conditions are at least double those on dry roads. When preparing to overtake, dropping back provides better forward vision past spray and allows sufficient time to build overtaking speed safely. Before changing lanes, checking both mirrors and the blind spot ensures the manoeuvre does not endanger faster vehicles approaching from behind.

Adım Adım Çözüm

1
Assess environmental conditions and adjust following distance
Separation distance behind the lead vehicle is doubled to at least four seconds to manage surface water and tyre spray.
Rain dramatically increases stopping distances and spray obscures forward vision if following too closely.
2
Perform full observational checks (MSPSL routine)
Interior and door mirrors are checked, followed by a shoulder check into the right-side blind spot.
Ensures no faster-moving traffic is already approaching or overtaking in the adjacent lane.
3
Signal intention and complete the overtake smoothly
Move into the overtaking lane safely, pass the vehicle, and return to the left lane when safely past.
Maintains predictable vehicle position and courtesy towards all road users without intimidation.

Anahtar Kavram

Safe following distances, thorough observation, and courteous behaviour when overtaking in adverse weather conditions.
Tahmini Süre:1m 0s
Soru 32Soru →

You are following a cyclist along an urban single carriageway. Ahead on the left, a refuse collection vehicle is stationary with workers moving around it, narrowing the carriageway. How should you anticipate the cyclist's behaviour and respond safely?

Cevabı ve açıklamayı göster

Cevap: Anticipate that the cyclist will steer out towards the centre of the road to avoid the obstruction, and drop back to give them space.

Cevap

Anticipate that the cyclist will need to move out towards the centre of the carriageway to pass the refuse vehicle, drop back, and allow them sufficient room.
Good hazard anticipation involves looking well ahead to spot potential bottlenecks. When a stationary vehicle obstructs the left side of the carriageway, cyclists will need to move out to maintain clearance from workers and obstacles. Dropping back and waiting patiently allows the cyclist to safely negotiate the hazard without being crowded.

Adım Adım Çözüm

1
Scan the road ahead beyond the vehicle directly in front to identify developing hazards.
Identified the stationary refuse vehicle and active workers narrowing the lane ahead.
Effective forward observation provides early warning of hazards before they force sudden manoeuvres.
2
Predict the necessary path of travel for the vulnerable road user.
Recognised that the cyclist must steer towards the centre of the carriageway to pass the stationary vehicle safely.
Cyclists need extra room to avoid hazards, door zones, and active roadside workers.
3
Adjust vehicle speed and drop back to establish a safe following distance.
Created adequate space for the cyclist to complete their manoeuvre without pressure.
Defensive driving requires giving vulnerable road users time and space rather than forcing an overtake in a constricted area.

Anahtar Kavram

Early hazard anticipation and scanning when following vulnerable road users approaching static road obstructions.
Tahmini Süre:1m 0s
Soru 33Soru →

You are approaching a zebra crossing that has white zig-zag road markings painted on both approaches. What action is strictly prohibited within the area covered by these zig-zag lines?

Cevabı ve açıklamayı göster

Cevap: Overtaking the moving vehicle nearest to the crossing or parking your vehicle

Cevap

Overtaking the moving vehicle nearest to the crossing or parking your vehicle is strictly prohibited within white zig-zag road markings.
Under UK Highway Code Rule 191, you must not park or wait on white zig-zag lines, nor overtake the moving vehicle nearest to the crossing or any vehicle that has stopped to give way to pedestrians.

Adım Adım Çözüm

1
Identify the specific road marking and its legal purpose.
The markings are white zig-zag lines located on the approaches to and exits from pedestrian crossings.
Zig-zag markings are installed to maintain a clear line of sight between approaching drivers and pedestrians waiting to cross.
2
Apply the statutory restrictions set out in UK Highway Code Rule 191.
Drivers must not park, wait, or overtake the leading vehicle within the zig-zag area.
Parking obscures waiting pedestrians from view, and overtaking near a crossing drastically elevates the risk of hitting a pedestrian who has stepped onto the road.

Anahtar Kavram

Highway Code restrictions on pedestrian crossing zig-zag markings
Tahmini Süre:45s
Soru 34Soru →

Due to safety regulations and high traffic speeds, certain vehicles and road users are prohibited from the motorway network. Which of the following is legally banned from driving on a motorway?

Cevabı ve açıklamayı göster

Cevap: An agricultural tractor

Cevap

An agricultural tractor is strictly prohibited from entering or using a motorway.
Under UK Highway Code Rule 253, agricultural vehicles such as tractors are strictly prohibited from using motorways due to the substantial hazard created by slow-moving machinery on high-speed roads.

Adım Adım Çözüm

1
Review the restrictions outlined in UK Highway Code Rule 253 regarding prohibited vehicles.
Identified that slow-moving vehicles, including agricultural vehicles, pedestrians, cyclists, horse riders, and sub-50cc motorcycles, must not use motorways.
Motorways are high-speed environments where significant speed differentials create extreme collision hazards.
2
Evaluate the vehicle options to determine which is subject to a total motorway ban.
Agricultural tractors are completely prohibited, whereas towing vehicles, heavy goods vehicles, and newly qualified drivers with 'P' plates are permitted under standard regulations.
The Highway Code explicitly excludes agricultural machinery from motorway access.

Anahtar Kavram

Prohibited vehicles and road users on UK motorways under Highway Code Rule 253
Tahmini Süre:45s
Soru 35Soru →

Drinking a caffeinated beverage produces an immediate stimulant effect that instantly reverses driving fatigue, allowing a tired driver to continue their journey safely without stopping for a rest break.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false because caffeine does not act immediately; it requires roughly 15 to 20 minutes to enter the bloodstream and produce any stimulant effect. Furthermore, chemical stimulants cannot replace genuine rest. Under The Highway Code, a fatigued driver must pull over in a safe location, consume caffeine, and take a short 15-minute nap rather than attempting to continue driving.

Adım Adım Çözüm

1
Analyze the physiological timing and effect of caffeine on driver alertness
Caffeine requires approximately 15 to 20 minutes to be absorbed and stimulate the central nervous system, meaning its effects are not instantaneous.
Understanding absorption delay is necessary to evaluate the immediate safety of continuing to drive while fatigued.
2
Compare the proposed action with official Highway Code guidelines for managing fatigue
The Highway Code requires stopping in a safe location to rest and combining caffeinated drinks with a short nap rather than continuing to drive.
Stimulants cannot substitute for sleep, and continuing to drive while exhausted creates a severe risk of micro-sleeps and collisions.

Anahtar Kavram

Driver Fatigue Countermeasures and Caffeine Absorption Latency
Soru 36Soru →

You are driving along a residential street and see an ice cream van parked at the kerb ahead. Which TWO actions should you take to manage the potential hazards?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Reduce your speed and be prepared to stop if needed; Scan actively for children who may step or run out from behind or in front of the vehicle

Cevap

Reduce speed, prepare to stop, and actively scan for children who might run or step out from around the parked vehicle.
Vehicles such as ice cream vans, school buses, and mobile shops are static hazards that attract children. Children are easily distracted and may dart into the road without checking for oncoming vehicles. Drivers must slow down, prepare to stop, and scan thoroughly around the vehicle's blind spots.

Adım Adım Çözüm

1
Identify the high-risk hazard zone
Recognise that a parked ice cream van naturally attracts young, unpredictable pedestrians.
Children may be preoccupied with their treats and oblivious to approaching traffic.
2
Adjust vehicle speed and readiness
Slow down significantly and cover the brake pedal.
Lower speed shortens the total stopping distance and allows time to react to sudden movements.
3
Expand visual scanning area
Check underneath the van, around the front and rear corners, and between nearby parked cars.
Pedestrians, especially small children, can emerge from blind spots without warning.

Anahtar Kavram

Anticipating vulnerable road users and managing hazards near vehicles that attract children
Soru 37Soru →

You are driving a car carrying a tall load securely fitted to your roof rack. What specific hazard should you check for before travelling along an urban street where trams operate?

Cevabı ve açıklamayı göster

Cevap: Reduced overhead clearance from energized electric power cables

Cevap

Reduced overhead clearance from energized electric power cables
According to The Highway Code (Rule 303), overhead electric lines for trams are usually suspended at a height of 5.8 metres (19 feet) above the carriageway, but they can be lower in certain locations. Drivers carrying tall or bulky items on a roof rack must verify that they have sufficient vertical clearance before travelling under overhead wires to prevent severe entanglement and electrical hazards.

Adım Adım Çözüm

1
Identify the vehicle condition and environment
The driver is operating a vehicle carrying a tall roof load along a street with an active tram network.
Vehicle dimensions, particularly total vertical height, are significantly altered when carrying bulky rooftop cargo.
2
Recall the infrastructure rules for tram routes under The Highway Code
Tram networks utilize overhead power lines suspended above the carriageway, typically at 5.8 metres (19 feet) but sometimes lower.
The Highway Code Rule 303 instructs drivers of high vehicles or those carrying roof loads to verify adequate height clearance under overhead wires.
3
Select the option that directly addresses the height and infrastructure hazard
Checking for reduced overhead clearance from overhead electric cables is the correct safety precaution.
Failing to account for load height near live overhead tram wires creates severe risk of snagging cables and electrical danger.

Anahtar Kavram

Overhead electric cable clearance for tall loads near tramways (Highway Code Rule 303)
Tahmini Süre:45s
Soru 38Soru →

You are driving towards a busy roundabout in a modern vehicle where the windscreen pillars (A-pillars) obstruct parts of your forward vision. What action should you take to ensure approaching road users are not hidden in these blind spots?

Cevabı ve açıklamayı göster

Cevap: Move your head and lean forward to look around the windscreen pillars before entering the junction

Cevap

Move your head and lean forward to look around the windscreen pillars before entering the junction
Windscreen pillars can easily obscure motorcycles, cyclists, and pedestrians approaching at an angle. Leaning forward and looking around the pillars changes your viewing angle, ensuring you detect all approaching road users before entering the roundabout.

Adım Adım Çözüm

1
Recognise the specific hazard created by vehicle design features such as wide A-pillars.
Identified that structural pillars create significant forward-diagonal blind spots that can completely obscure approaching vehicles or vulnerable road users.
Modern vehicle safety structures often feature thicker pillars that impede direct line-of-sight observation at junctions and roundabouts.
2
Determine the physical observation technique required to compensate for structural blind spots.
Recognised that moving the head and leaning forward changes the visual angle past the obstruction.
Mirrors and static eye movement cannot reveal objects hidden behind forward structural pillars; only physical repositioning clears these blind spots.

Anahtar Kavram

Navigating structural vehicle blind spots caused by windscreen pillars through active head movement
Tahmini Süre:1m 30s
Soru 39Soru →

You are following a long articulated lorry on a single carriageway. As the lorry approaches a narrow side road on the left, the driver signals left but moves over towards the centre line. What should you do?

Cevabı ve açıklamayı göster

Cevap: Stay well back behind the lorry and allow it to complete the turn before proceeding

Cevap

Stay well back behind the lorry and allow it to complete the turn before proceeding.
Long articulated vehicles need extra road space to manoeuvre around tight corners. When turning left into a narrow road, the driver must swing out towards the centre line to prevent the rear wheels mounting the pavement. Under Highway Code Rule 167, drivers must never try to overtake on the left or push past on the right; they must stay well back and wait patiently until the turn is fully completed.

Adım Adım Çözüm

1
Analyse the vehicle type, signal, and road position.
The vehicle ahead is a long articulated lorry signalling left but moving right towards the centre line.
Long vehicles have a large swept path and need to swing out wide to clear the kerb and corner radius when turning into narrow junctions.
2
Evaluate the risks of overtaking on either side.
Passing on the left risks being crushed by the trailer off-tracking, while overtaking on the right creates conflict with oncoming traffic or the cab's turning path.
According to Highway Code Rule 167, drivers must not attempt to overtake a vehicle that is indicating to turn left and has moved to the right to make the turn.
3
Determine the required driver action.
Hold back safely at an appropriate distance behind the lorry.
Keeping a safe distance maintains full visibility, keeps you out of the driver's blind spots, and allows the lorry sufficient room to finish the manoeuvre safely.

Anahtar Kavram

Highway Code Rule 167 prohibits overtaking on the left or right when a large vehicle moves out to negotiate a tight turn.
Tahmini Süre:45s
Soru 40Soru →

You are driving a passenger car and towing a braked caravan on a dual carriageway where the national speed limit applies. The road surface is wet following heavy rain. What is your maximum legal speed limit, and how must you adjust your safety margins for the conditions ahead?

Cevabı ve açıklamayı göster

Cevap: 60 mph; you must increase your normal following distance to at least four seconds to account for the wet conditions.

Cevap

60 mph; you must increase your normal following distance to at least four seconds to account for the wet conditions.
The correct answer accurately synthesizes two critical Highway Code rules: vehicles towing a caravan or trailer are restricted to 60 mph on dual carriageways (unlike the 70 mph limit for solitary cars), and the standard two-second separation distance must be doubled to at least four seconds when driving on wet roads to account for significantly increased braking distances.

Adım Adım Çözüm

1
Determine the correct speed limit for the vehicle combination on the specified road type.
The limit is 60 mph.
While the national speed limit on a dual carriageway for standalone cars is 70 mph, vehicles towing a caravan or trailer are legally restricted to a maximum of 60 mph.
2
Identify the standard dry-weather following distance.
The standard rule is a two-second time gap.
The Highway Code mandates a minimum two-second gap between your vehicle and the one directly ahead in dry, optimal conditions.
3
Calculate the required safety margin adjustment for the weather conditions.
The gap must be doubled to at least four seconds.
In wet weather, stopping distances are at least double those required on dry roads, so the time gap must be doubled to compensate.

Anahtar Kavram

Towing speed limits and wet weather safety margins
Tahmini Süre:1m 0s
ÖncekiSayfa 2 / 95Sonraki